November 2009 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] "Warning! ehci_hcd should always be loaded before ..." message still there in kernel 2.6.27.37-0.1
by Fred Scali-West 05 Dec '09

05 Dec '09

Hi, I assume that this is the right list to post it (rather than opensuse-bugs), but I may be wrong, so any comments are welcome... The issue triggering the message (in dmesg) "Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after" is stil there in last kernel update (uname -a = Linux mir 2.6.27.37-0.1- default #1 SMP 2009-10-15 14:56:58 +0200 i686 athlon i386 GNU/Linux). As discussed between list users Jean Delvare & Greg KH in message- id:<200905051826.54284.jdelvare@xxxxxxx> from 5 May 2009, the 2 ending lines here (in /etc/modprobe.conf): # "Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not # after" (bnc#449853) # mkinitrd hints: # SUSE INITRD: uhci-hcd REQUIRES ehci-hcd # SUSE INITRD: ohci-hcd REQUIRES ehci-hcd install uhci-hcd /sbin/modprobe ehci-hcd; /sbin/modprobe --ignore-install uhci-hcd install ohci-hcd /sbin/modprobe ehci-hcd; /sbin/modprobe --ignore-install ohci-hcd are missing in the /etc/modprobe.conf from /boot/initrd-2.6.27.37-0.1-default. Manually modifing the file in the initrd (and appending the 2 missing lines) solved again the issue, so that would be really nice to get rid definitively of this problem as soon as possible... Greetings of France, FSW -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 5

[opensuse-kernel] KOTD/HREAD: kernel source not in sync again
by Markus Koßmann 04 Dec '09

04 Dec '09

Since Wednesday, there were three updates of KOTD/HEAD and with none of them the provided kernel source version was in sync with the provided binaries. Another observation:When there were a few days without update, in many cases the next update is out of sync and only the following update is in sync again -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 12

[opensuse-kernel] current kernel for FACTORY?
by Stefan Seyfried 25 Nov '09

25 Nov '09

Hi, I hope I'm not too offtopic here ;) What's the chance that we will get an uptodate kernel for FACTORY a bit more often (say, once a week)? I still have this: strolchi:~ # rpm -qi kernel-default Name : kernel-default Relocations: (not relocatable) Version : 2.6.32 Vendor: openSUSE Release : 1.1 Build Date: Wed Nov 4 16:12:55 2009 Install Date: Mon Nov 9 17:43:05 2009 Build Host: build17 Group : System/Kernel Source RPM: kernel-default-2.6.32-1.1.nosrc.rpm Size : 100482670 License: GPL v2 only Signature : RSA/8, Wed Nov 4 17:00:43 2009, Key ID b88b2fd43dbdc284 Packager : http://bugs.opensuse.org URL : http://www.kernel.org/ Summary : The Standard Kernel Description : Which smells pretty bad already (and in fact has lots of problems, I have not had a kernel crash that often on me since at least half a year ago and back then, it was KMS that was bad. Anyway, this kernel is so ancient, that I do not even dare to report bugs against ist anymore). I know there's 2.6.32-1.4 in the repo, but as that's only a rebuild, I doubt it will fix things up. Or is the common wisdom to use the KOTD nowadays? Is it stable? Can I build my KMPs against it in the buildservice? Does it work with zypper to keep the FACTORY and the KOTD kernel, so that you have always two to choose from? Thanks, seife -- Stefan Seyfried "Any ideas, John?" "Well, surrounding them's out." -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 2

[opensuse-kernel] Any Archived openSUSE Kernels?
by Rob OpenSuSE 23 Nov '09

23 Nov '09

I have a box which runs 11.1 fine & seemingly 2.6.27.X kernels, but not 11.2 or any 2.6.31.X kernels I've tried. Are there any archives of "golden" kernels, so I could do a bisect to find which release breaks things? 2.6.29 2.6.30 || 2.6.28 Using generic binary rpm's would be a huge time saver on compiling vanilla from source. Rob -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

6 15

[opensuse-kernel] Install Driver Problem
by Günther J. Niederwimmer 21 Nov '09

21 Nov '09

Hello, can any tell me the correct driver for a ICH10R installation ? I have to install 11.2 on a Intel Board DX58SO with a Bios Created Raid1 (SoftRaid) on Board is also a Mavell eSATA Controller: The Marvell Driver is found and installaed but with this Config I can't Create Partitions with YaST2 :( when I found the coorect driver can I include this driver with the command- line in YaST2? insmod=ahci BrokenModules=ata_Marvell ??? Thank's for the help, -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] the kernel repository is public \o/
by Michal Marek 20 Nov '09

20 Nov '09

Hi, if you opened http://gitorious.org/opensuse/ today, you might have noticed the flood of kernel-source updates in the activity log ;-). Now it's official: http://news.opensuse.org/2009/11/20/opensuse-kernel-repository-is-public/ Sorry that it took us so long. Michal -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Re: 11.2 kabi vs. PM / yenta fix
by Greg KH 19 Nov '09

19 Nov '09

On Thu, Nov 12, 2009 at 08:13:34PM +0100, Rafael J. Wysocki wrote: > On Thursday 12 November 2009, Michal Marek wrote: > > Hi, > > > > I added the kabi files from the 11.2 goldmaster kernel to the > > repository, so from now on, every kabi change will be caught by the > > build-time checks. Unfortunately there were already some changes in the > > repo that did change the kabi signatures: > > patches.drivers/alsa-hda-reboot-notify, already reverted by Takashi, > > "dm snapshot: use unsigned integer chunk size" and "PM / yenta: Split > > resume into early and late parts (rev. 4)", both came via the 2.6.31.6 > > update. I reverted the latter two for now, so that the builds don't > > start failing suddenly, but I guess that's not the right option esp. for > > the yenta fix. Rafael, you wrote the patch, can you comment here? The > > problem is the new member in struct pcmci_socket. Can we > > * just ignore this change (in worst case, some drivers will need a > > rebuild for the next kernel update) > > I'd choose this option. > > > * hide the change from genksyms (do external drivers ever need to > > allocate the structure themselves?) > > That I don't know. Greg? I don't know of any that would. I vote for the "ignore this change" as it came from upstream, and any external driver would have to handle it anyway. And note that there almost are no external drivers anymore, with the exception of ati and nvidia, so that reduces the chance of a problem even more. And anyway, I didn't think we were doing ABI stuff for opensuse kernels, is this a change? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 3

Re: [opensuse-kernel] broken rt61pci driver in 11.2 kernels 30 / 31 /32 SOLUTION !!!!!!!!!!!!!!
by rob koendering 17 Nov '09

17 Nov '09

The default config from install for this card is not working during install the ifcfg-wlan0 have other params than given. So with Yast i made a new configuration for the card giving the mac adress for the AP it has to connect to No power management Finish yast and .................... INTERNET !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Its working as it always has. Big thanks for helping me. iwconfig output gave me the way where to to look and what to do. Once again big thanks for helping me 2009/11/16 Jiri Benc <jbenc(a)suse.cz>: > On Mon, 16 Nov 2009 13:13:21 -0400, rob koendering wrote: >> Made a report in bugzilla couldnot find it afterwards you know the >> problem here as attachment the dmesg + lspci in 1 file > > There is a "My Reports" link at the bottom part of the page when you > log in to bugzilla. > > When you find your report, please attach the output of > lspci -nn > (note the "-nn"). > > If you don't see your report, something got wrong and you'll need to > fill it again. > > Also, from the dmesg you sent the rt61pci driver loads correctly. To be > able to further debug the problem, also attach the output of the > following commands: > ifconfig -a > iwconfig > > Let's continue in the bugzilla, this list is not the correct place to do > debugging. > > Jiri > > -- > Jiri Benc > SUSE Labs > -- Robert Koendering Willemstad Curacao -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] usb-storage and usb masstorage access of vmware guest OS
by Markus Koßmann 17 Nov '09

17 Nov '09

With SUSE-11.2/kernel 2.6.31, there seems to be no possiblity to have access to an USB mass storage device attached to the host from an guest OS in vmware 6.5. With the 2.6.25 kernel of SUSE-11.0 it used to work. With the 2.6.27 kernel of 11.1 , the mass storage driver changed behaviour and grabs the mass storage device again after being thrown out by vmware. Vmware then fails to access the device. Workaround was to unload the USB mass storage drivermodule. But now with with 11.2 and 2.6.31, the USB mass storage driver is no longer compiled as module. So the option to unload the module is gone, too. Is there any workaround for that problem other than recompiling the kernel with modular usb-storage ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

3 2