November 2014 - openSUSE Autoinstall - openSUSE Mailing Lists

[opensuse-autoinstall] State of Autoyast for OpenSUSE 13.1
by Joschi Brauchle 18 Dec '14

18 Dec '14

Hi everyone, sorry for asking such a general question, but what is the state of AutoYast for OpenSUSE 13.1? I converted a completely working XML from a 12.3 installation to 13.1. The autoinstallation finishes, but the installed system is - missing Sysconfig configuration from <sysconfig> section - has not run any of the <post-scripts> and <init-scripts> - does not accept the root password configured in the <users> section - is missing all files installed from the <files> section of the XML - misses LDAP and KRB config from <ldap> and <kerberos> - services are not configured as in <services> and many more problems. To me it looks like the complete second stage is missing, as all those things are done there. Is this a known problem? Or are there known problems for 13.1? Did anyone succeed with AutoYast and 13.1 with any of the above mentioned XML sections? The y2log file from second stage is very small and does not show any errors... Best regards, Joschi Brauchle

6 25

Re: [opensuse-autoinstall] Question about network
by Achim Klausmann 29 Nov '14

29 Nov '14

Am 28.11.2014 um 10:34 schrieb Simon Crute: > You could probably use a pre script to identify the mac address and plug > it into the xml file. How would this look like? Best regards Achim Klausmann -- -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 1

[opensuse-autoinstall] Question about network
by Achim Klausmann 29 Nov '14

29 Nov '14

Hello, is it possible to set a option for haveing a connected interface card configured if i have more than one NIC, independently what NIC it is? My setup this time: <interfaces config:type="list"> <interface> <bootproto>static</bootproto> <device>eth0</device> <ipaddr>192.168.1.132</ipaddr> <netmask>255.255.255.0</netmask> <prefixlen>24</prefixlen> <startmode>auto</startmode> <usercontrol>no</usercontrol> </interface> What mens the udev rule: <net-udev config:type="list"> <rule> <name>eth0</name> <rule>ATTR{address}</rule> <value>08:00:27:70:fc:2e</value> </rule> </net-udev> Setup should work with 'net.ifnames=0' on openSUSE 13.1. Best regards AK -- -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

3 9

[opensuse-autoinstall] opensuse 13.2 - yast clone_system produces a virtually empty autoinst.xml
by Per Jessen 10 Nov '14

10 Nov '14

This is all I get: <?xml version="1.0"?> <!DOCTYPE profile> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <deploy_image> <image_installation config:type="boolean">false</image_installation> </deploy_image> </profile> I'm not sure if this is a yast or an autoyast problem. (or an operator problem for that matter). http://bugzilla.opensuse.org/show_bug.cgi?id=899714 -- Per Jessen, Zürich (6.1°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] Invoking autoyast from custom media based on 13.2 fails
by Jeromy Smith 06 Nov '14

06 Nov '14

If I invoke the autoyast process by specifying autoyast=file:/// the installer cannot find the profile. Invoking via FTP works as expected. I turned on y2debug and I think this is where I start getting problems: 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [agent-system] SystemAgent.cc(Execute):1156 mkdir /tmp/YaST2-03217-jSwd2L/rules 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] autoinstall/io.rb:71 Scheme:file Host: Path://rules/rules.xml Localfile:/tmp/YaST2-03217-jSwd2L/rules/rules.xml 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:346 URL::Build(): input: $["fragment":"", "host":"", "pass":"", "path":"/rules/rules.xml", "port":"", "query":"", "scheme":"file", "user":""] 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:356 url: file 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:378 url: file:// 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:387 url: file:// 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:393 url: file:// 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:430 url: file:///rules/rules.xml 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:462 url: file:///rules/rules.xml 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:176 url=file:///rules/rules.xml 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:196 rawtokens=["file://", "file", "", "/rules/rules.xml", "", "", "", ""] 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:231 userpass=[] 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:236 Index 1 is out of array size 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:241 Index 3 is out of array size 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:243 Index 7 is out of array size 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:245 Index 5 is out of array size 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:248 Index 7 is out of array size 2014-11-06 10:54:44 <1> 172.16.4.62(3217) [Ruby] modules/URL.rb:253 Index 0 is out of array size 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:255 hostport6: 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:282 tokens=$["fragment":"", "host":"", "pass":"", "path":"/rules/rules.xml", "port":"", "query":"", "scheme":"file", "user":""] 2014-11-06 10:54:44 <0> 172.16.4.62(3217) [Ruby] modules/URL.rb:300 tokens: $["fragment":"", "host":"", "pass":"", "path":"/rules/rules.xml", "port":"", "query":"", "scheme":"file", "user":""] It looks like since userpass is empty it fails. This worked in 13.1. Jeromy -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 1