June 2003 - openSUSE Autoinstall - openSUSE Mailing Lists

Antwort: Re: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast and LVM
by Tobias_Mucke＠mn.man.de 13 Jun '03

13 Jun '03

Hi it is me again. Andreas Matthieu send me a little pre-script, which would delete LVM data of a specific vg. I added some code, so that it should now be possible do delete all vgs. Here it is. <scripts> <pre-scripts config:type="list"> <script> <filename>/vgremove.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[ vgs=`ls /dev/vg_*` insmod lvm-mod vgscan for vg in $vgs do if [ -d $vg ] then vgchange -a y $vg lvs=`ls $vg` for lv in $lvs do i=`basename $lv` if [ $lv != "group" ] then lvremove -f $vg/$lv fi done vgchange -a n $vg vgremove $vg done ]]> </source> </script> </pre-scripts> </scripts> Mit freundlichen Grüßen Tobias Mucke -------------------------------------------------------------------------------------------------- MAN Nutzfahrzeuge AG Informationssysteme Organisation (I) Dachauer Straße 667 D-80995 München Tel.: +49 (0) 89 1580 5269 Mail-Adresse: Tobias_Mucke(a)mn.man.de Internet-Adresse: http://www.man-trucks.com -------------------------------------------------------------------------------------------------- Stefan Weigel <sw@global-linxs. An: "Andreas Rother" <Andreas.Rother(a)eplus.de> de> Kopie: suse-autoinstall(a)suse.com Thema: Re: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast and LVM 12.06.2003 13:11 Bitte antworten an sw Hi! Maybe this would work: >From the documentation (http://www.suse.de/~nashif/autoinstall/8.1/html/c326.html#AEN690) Pre-Install Scripts Executed before YaST2 does any real change of the system (Before partitioning ~~~~~ and package installation) So, make such a script and do a: vgscan vgchange -a y lvremove /dev/myvg/mvlv lv remove /dev/myvg/mylv2 [..] vgchange -a n vgremove myvg If you have different systems with different vg's/lv's, then you could write a script which does these steps automaticly (get the lv/vg from the output from vgscan & lvscan). Best regards Stefan Am Donnerstag, 12. Juni 2003 08:47 schrieb Andreas Rother: > Hi, > > we have the same problem here with SLES8. Our Workaround is to have an > additional autoyast-config without LVM, so we wipe out any lvm information > on the disks, before we install the server. > > Of course it would be nicer, if this bug would be solved ;-) > > Kind regards > Andreas Rother > UNIX-Systemadministration -- __________________________________________ stefan weigel administration global linxs gmbh knowledge interaction romanstrasse 16 80639 munich - germany www.global-linxs.com tel.: +49(0)89. 189 336- 61 fax.: +49(0)89. 189 336- 99 email: sw(a)global-linxs.com __________________________________________ -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com Diese Mitteilung sowie eventuelle Anhänge sind vertraulich und können privilegiert oder auf andere Weise gegen Weitergabe geschützt sein. Sollten Sie nicht der beabsichtigte Empfänger sein, bitte rufen oder mailen Sie den Absender an und löschen Sie diese Mitteilung sowie eventuelle Anhänge aus Ihrem System. Sind Sie nicht der beabsichtigte Empfänger, dürfen Sie diese Mitteilung bzw. die Anhänge weder kopieren noch an andere Personen weitergeben.

1 0

Antwort: RE: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast a nd LVM
by Tobias_Mucke＠mn.man.de 13 Jun '03

13 Jun '03

Not really, because lvm stores it data in the vgda which is located on the pvs not in the mbr. To delete these you have to execute dd if=/dev/zero of=/dev/hd*, but this could take a long time depending on space of the harddisk. Mit freundlichen Grüßen Tobias Mucke -------------------------------------------------------------------------------------------------- MAN Nutzfahrzeuge AG Informationssysteme Organisation (I) Dachauer Straße 667 D-80995 München Tel.: +49 (0) 89 1580 5269 Mail-Adresse: Tobias_Mucke(a)mn.man.de Internet-Adresse: http://www.man-trucks.com -------------------------------------------------------------------------------------------------- Voss Stefan <stefan.voss@itel An: "'suse-autoinstall(a)suse.com '" <suse-autoinstall(a)suse.com> lium.com> Kopie: Thema: RE: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast a nd LVM 12.06.2003 15:06 Hi, if pre scripts are executed even before partinioning maybe one can use dd if=/dev/zero of=/dev/hdx bs=512 count=2 to wipe out any lvm or raid info from the harddisks Regards, Stefan Voss -----Original Message----- From: Stefan Weigel To: Andreas Rother Cc: suse-autoinstall(a)suse.com Sent: 6/12/2003 1:11 PM Subject: Re: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast and LVM Hi! Maybe this would work: >From the documentation (http://www.suse.de/~nashif/autoinstall/8.1/html/c326.html#AEN690) Pre-Install Scripts Executed before YaST2 does any real change of the system (Before partitioning ~~~~~ and package installation) So, make such a script and do a: vgscan vgchange -a y lvremove /dev/myvg/mvlv lv remove /dev/myvg/mylv2 [..] vgchange -a n vgremove myvg If you have different systems with different vg's/lv's, then you could write a script which does these steps automaticly (get the lv/vg from the output from vgscan & lvscan). Best regards Stefan Am Donnerstag, 12. Juni 2003 08:47 schrieb Andreas Rother: > Hi, > > we have the same problem here with SLES8. Our Workaround is to have an > additional autoyast-config without LVM, so we wipe out any lvm information > on the disks, before we install the server. > > Of course it would be nicer, if this bug would be solved ;-) > > Kind regards > Andreas Rother > UNIX-Systemadministration -- __________________________________________ stefan weigel administration global linxs gmbh knowledge interaction romanstrasse 16 80639 munich - germany www.global-linxs.com tel.: +49(0)89. 189 336- 61 fax.: +49(0)89. 189 336- 99 email: sw(a)global-linxs.com __________________________________________ -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com This message and any attachments are confidential and may be privileged or otherwise protected from disclosure. If you are not the intended recipient, please telephone or email the sender and delete this message and any attachment from your system. If you are not the intended recipient, you must not copy this message or attachment or disclose the contents to any other person.

1 0

error .. packages not available during iso creation
by Richard Bos 12 Jun '03

12 Jun '03

in the process of creating an iso image, autoyast checks the package availality, in my case this check fails. That's probably due to an incorrect repository setup. Can someone enlighten me, what the correct setup should be. The error message I get is "498 packages not available". I just choose a "default" system, no other pkgs have been added. I now have: ....suse82/base/suse/setup/descr/packages ....suse82/base/suse/i586/ ....suse82/base/suse/i686/ ....suse82/base/suse/noarch/ ....suse82/base/suse/src/ Should this be okay (that's how I mirrored it from the ftp server)? (I used the packages database as is (the mirrored one)). I tried the following setup as well: ....suse82/base/setup/descr/packages ....suse82/base/suse/i586/ ....suse82/base/suse/i686/ ....suse82/base/suse/noarch/ ....suse82/base/suse/src/ here I used a package database created by create_...._...._packages I'm still getting the ".. packages not available" (it's in iso.ycp). Should I try: ....suse82/base/suse/setup/descr/packages ....suse82/base/suse/<all pkgs> I hope someone can give a push in the back to get me on speed. -- Richard Bos Without a home the journey is endless

1 1

autoyast always asks for enabling 3d-hardware support
by stefan sokoll 12 Jun '03

12 Jun '03

hi during autoinstall i have to do user interaction for deciding if i like to have 3d-hardware support for my graphics card enabled - how can i avoid that? my x11 configuration: <x11> <color_depth config:type="integer">16</color_depth> <configure_x11 config:type="boolean">true</configure_x11> <display_manager>kdm</display_manager> #### i've already defined it here: <enable_3d config:type="boolean">true</enable_3d> <monitor> <monitor_device>unknown model</monitor_device> <monitor_vendor>unknown vendor</monitor_vendor> </monitor> <resolution>1024x768</resolution> <start_x11 config:type="boolean">true</start_x11> </x11> thanks, stefan --------------------------------- Gesendet von http://mail.yahoo.de Mit freenetDSL jetzt so schnell wie günstig durchstarten! Bereits in vielen Ortnetzen verfügbar. Mehr Info: dsl.freenet.de.

2 1

RE: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast a nd LVM
by Voss Stefan 12 Jun '03

12 Jun '03

Hi, if pre scripts are executed even before partinioning maybe one can use dd if=/dev/zero of=/dev/hdx bs=512 count=2 to wipe out any lvm or raid info from the harddisks Regards, Stefan Voss -----Original Message----- From: Stefan Weigel To: Andreas Rother Cc: suse-autoinstall(a)suse.com Sent: 6/12/2003 1:11 PM Subject: Re: [suse-autoinstall] Antwort: Re: [suse-autoinstall] Autoyast and LVM Hi! Maybe this would work: >From the documentation (http://www.suse.de/~nashif/autoinstall/8.1/html/c326.html#AEN690) Pre-Install Scripts Executed before YaST2 does any real change of the system (Before partitioning ~~~~~ and package installation) So, make such a script and do a: vgscan vgchange -a y lvremove /dev/myvg/mvlv lv remove /dev/myvg/mylv2 [..] vgchange -a n vgremove myvg If you have different systems with different vg's/lv's, then you could write a script which does these steps automaticly (get the lv/vg from the output from vgscan & lvscan). Best regards Stefan Am Donnerstag, 12. Juni 2003 08:47 schrieb Andreas Rother: > Hi, > > we have the same problem here with SLES8. Our Workaround is to have an > additional autoyast-config without LVM, so we wipe out any lvm information > on the disks, before we install the server. > > Of course it would be nicer, if this bug would be solved ;-) > > Kind regards > Andreas Rother > UNIX-Systemadministration -- __________________________________________ stefan weigel administration global linxs gmbh knowledge interaction romanstrasse 16 80639 munich - germany www.global-linxs.com tel.: +49(0)89. 189 336- 61 fax.: +49(0)89. 189 336- 99 email: sw(a)global-linxs.com __________________________________________ -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0

Antwort: Re: [suse-autoinstall] Autoyast and LVM
by Andreas Rother 12 Jun '03

12 Jun '03

Hi, we have the same problem here with SLES8. Our Workaround is to have an additional autoyast-config without LVM, so we wipe out any lvm information on the disks, before we install the server. Of course it would be nicer, if this bug would be solved ;-) Kind regards Andreas Rother UNIX-Systemadministration -- Andreas Rother - E-Plus Mobilfunk GmbH & Co. KG Division Operations - System & Application Management - Systems Operation & Services - Open Systems Phone : unbekannt / Fax : unbekannt / Mobile : unbekannt Anas Nashif <nashif(a)suse.de> 06.06.2003 18:35 An: Tobias_Mucke(a)mn.man.de Kopie: suse-autoinstall(a)suse.com Thema: Re: [suse-autoinstall] Autoyast and LVM Hi, What release are using? 8.1? SLES? 8.2? Anas Tobias_Mucke(a)mn.man.de wrote: > Hi everybody, > > I'm using Autoyast and LVM together successfully during the first > installation. But when I try a second installation on the same node, yast2 > says that Volume Groups allready exist and doesn't format the lvols. > > Can I force YaST to create pvs ignoring that they are already in a vg? > > Thanks for help. > > > > Mit freundlichen Grüßen > > Tobias Mucke > > -------------------------------------------------------------------------------------------------- -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

2 1

Help on Apache2 and PHP4 in SuSE Pro 8.2
by Anders Norrbring 10 Jun '03

10 Jun '03

Hi everybody! I'm trying to install Apache2 together with PHP4 and phpMyAdmin on my new SuSE Pro 8.2 server, but so far - no luck.. I use the standard installation options in Yast2 when I do a absolute fresh install on the computer and I've got the "Auto check dependencies" on. So, I thought all was well after marking up Apache2, PHP4 and phpMyAdmin and correlating modules as suggested by Yast2. But no... The server doesn't even understand that PHP4 is installed after what it seems to me, if I try to access a .php page, it insists on sending me the page as a download file instead of interpreting it and sending the output. Does anyone know the reason/solution to this, or is it a clear case of calling support? Later, Anders Norrbring Norrbring Consulting

2 1

RE: [suse-autoinstall] SuSE-8.2 & autoinstall
by Robison, Jonathon (M.) 10 Jun '03

10 Jun '03

In regards to my earlier problem - The yast system backup function appears to lock up if the drive does not have room to write the backup. Perhaps an added line in the scripts to monitor disk availability and pop up a "gotta abort - not enough room" message? Jonathon M. Robison Linux Integration Analyst Strategic Infrastructure Engineering 313-323-9529 -----Original Message----- From: Mikhail Terekhov [mailto:terekhov@emc.com] Sent: Tuesday, June 10, 2003 3:47 PM To: suse-autoinstall(a)suse.com Subject: Re: [suse-autoinstall] SuSE-8.2 & autoinstall Anas Nashif wrote: > Hi, > A new version with a fixed DTD will be provided soon. Can you please > Anas, Thanks for the information, any estimate when it will be available? Regards, Mikhail -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

2 1

Platform Questions
by Volker.Wiegand＠t-online.de 10 Jun '03

10 Jun '03

Hi, I have two questions, maybe I can get some help here :-) 1.) Can I use AutoYaST for z/Linux in the same way as for Intel? 2.) Assuming I want to target SLES8 z/Linux production servers, can I use an 8.2 Pro as the development / repository server? What would I have to observe? Kind regards Volker Wiegand

2 1

Problems with reporting
by Stefan Weigel 10 Jun '03

10 Jun '03

Hi! I have one problem left within my autoinstallation process. When all RPM's are installed, lilo is written into the bootsector. After that a message pops up with "Sucessfully written into Bootsector [..]". The pop up needs to be confirmed with a click on the OK button. That's strange to me. I've read about the default should be show all errors/warnings/messages with a timeout of 10 seconds even if I don't have a <report> section in my autoinst.xml. I've also made a <report> section (see below) but without any postive result. So, can anybody give me a hint about this prob ? Btw.: I am using the latest autoyast packages with the latest update image (y2update.gz) on floppy. Part of my autoinst.xml: [..] <install> <bootloader> <activate config:type="boolean">false</activate> <initrd_modules config:type="list"> <listentry>DAC960</listentry> <listentry>lvm-mod</listentry> <listentry>ext3</listentry> </initrd_modules> <lba_support config:type="boolean">true</lba_support> <linear config:type="boolean">false</linear> <location>mbr</location> </bootloader> <report> <messages> <show>true</show> <timeout>5</timeout> <log>true</log> </messages> <errors> <show>true</show> <timeout>5</timeout> <log>true</log> </errors> <warnings> <show>true</show> <timeout>5</timeout> <log>true</log> </warnings> </report> [..] Best regards Stefan -- __________________________________________ stefan weigel administration global linxs gmbh knowledge interaction romanstrasse 16 80639 munich - germany www.global-linxs.com tel.: +49(0)89. 189 336- 61 fax.: +49(0)89. 189 336- 99 email: sw(a)global-linxs.com __________________________________________

3 3