March 2005 - openSUSE AMD64 - openSUSE Mailing Lists

VPN Client
by David 30 Mar '05

30 Mar '05

Is there a recommended VPN client that will work reliably with x86_64? David

7 7

Fwd: Re: [suse-amd64] VPN Client --> VMWare5
by jerry bookter 30 Mar '05

30 Mar '05

Oooops, meant to send this to the List, not Wigbert :-p --- jerry bookter <jerryb1961(a)yahoo.com> wrote: > Date: Wed, 30 Mar 2005 12:04:17 -0800 (PST) > From: jerry bookter <jerryb1961(a)yahoo.com> > Subject: Re: [suse-amd64] VPN Client --> VMWare5 > To: Wigbert Lindenbauer <wlindenbauer(a)t-online.de> > > >I tested the RC3 of vmware5 with Suse9.2-64bit and > > with XP-x64 on my > > AMD64-PC. > > > > It runs without any problems here . > > I am able to test Solaris10 as a VM under Suse9.2 > . > > 32bit XP-Pro is also possible as VM. > > > > The alternative Win4LinPro is to slow for daily > use. > > > > FWIW, I've been runnign the beta of VMware 5 since > February. Works great under 9.2/64. > > Cedega and of course Wine run fine too. >

1 0

strange resolver problem
by Dieter Kluenter 30 Mar '05

30 Mar '05

Hi, system: SuSE-9.2-x86_64, Kernel 2.6.8-24.11 hardware: asus A8V DELUXE, S-ATA Samsung SP0812C memory: 2x512 MB Infineon locale: DE_UTF-8 hosts: rubin with amd64, marin with x386 I experience a strange resolver problem with OpenLDAP and I'm not sure, wether this is a x86_64 issue or an OpenLDAP issue. Just to demonstrate the problem ,----[ with domain name] | dieter@rubin:~> ldapsearch -H ldap://marin.l4b.de -b "ou=adressbuch,o=avci,c=de" -s one sn=blei -x | ldap_bind: Can't contact LDAP server (-1) `---- ,----[ with network address ] | dieter@rubin:~> ldapsearch -H ldap://192.168.100.95 -b "ou=adressbuch,o=avci,c=de" -s one sn=blei -x | # extended LDIF | # | # LDAPv3 | # base <ou=adressbuch,o=avci,c=de> with scope one | # filter: sn=blei | # requesting: ALL | [...] `---- I cannot authenticate with kerberos GSSAPI from this host to any other ldap server in my network, but OpenSSH and GSSAPI works flawless. On the other side, a simple bind works with remote clients ,----[ simple bind from remote host ] | dieter@marin:~> ldapsearch -H ldap://rubin.l4b.de -b ou=adressbuch,o=avci,c=de -s one sn=blei -x | # extended LDIF | # | # LDAPv3 | # base <ou=adressbuch,o=avci,c=de> with scope one `---- but a gssapi bind fails dieter@marin:~> ldapsearch -H ldap://rubin.l4b.de -b ou=adressbuch,o=avci,c=de -s one sn=blei -Y gssapi SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Following the last lines of strace ,----[ strace log ] | endto(0, "\355I\1\0\0\1\0\0\0\0\0\0\5rubin\3l4b\2de\0\0\1\0\1", 30, 0, NULL, 0) = -1 ENOTSOCK (Socket operation on non-socket) | sendto(0, "\355I\1\0\0\1\0\0\0\0\0\0\5rubin\3l4b\2de\0\0\1\0\1", 30, 0, NULL, 0) = -1 ENOTSOCK (Socket operation on non-socket) | brk(0x547000) = 0x547000 | open("/etc/hosts", O_RDONLY) = 4 | fcntl(4, F_SETFD, FD_CLOEXEC) = 0 | fstat(4, {st_mode=S_IFREG|0644, st_size=682, ...}) = 0 | mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a96f4a000 | read(4, "#\n# hosts This file desc"..., 4096) = 682 | read(4, "", 4096) = 0 | lseek(4, 0, SEEK_SET) = 0 | read(4, "#\n# hosts This file desc"..., 4096) = 682 | close(4) = 0 | munmap(0x2a96f4a000, 4096) = 0 | stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=25, ...}) = 0 | close(0) = 0 | close(0) = -1 EBADF (Bad file descriptor) | --- SIGSEGV (Segmentation fault) @ 0 (0) --- | +++ killed by SIGSEGV +++ `---- The file /etc/resolv.conf is not corrupted or latin-1 encoded ,----[ output of file ] | dieter@rubin:/etc> file resolv.conf | resolv.conf: ASCII text, with no line terminators `---- Just to avoid kerberos configuration discussions, the file /etc/krb5.keytab is readable and service principals have been created for ldap and the keys have been exported to keytab. Any hints? -Dieter -- Dieter Klünter | Systemberatung http://www.dkluenter.de GPG Key ID:01443B53

1 0

Does Suse 9.2 support LSI Logic megaraid cards
by James D. Parra 30 Mar '05

30 Mar '05

Hello, I noticed that the megaraid module doesn't load automatically during install, although the megaRAID 150-6 card is detected. Does Suse 9.2 support this card? Thank you, James

1 0

Re: [suse-amd64] Speedfreq for AMD64
by Brad Bourn 30 Mar '05

30 Mar '05

Wouldn't setting the cpufreq to dynamic do what you want? B-) On Wednesday 30 March 2005 09:42 am, zio budda wrote: > On Tue, 29 Mar 2005 21:31:53 -0700, Brad Bourn <brad(a)summitrd.com> wrote: > > If I am understanding you correctly, I think what you want to be playing > > with is the command powersave in console. > > No, I want only to go to 800Mhz if I don't use the notebook. > > > That should allow you to configure the > > different schemes (performance, dynamic, etc.) > > How ? > > > start with > > > > powersave -h to see all options. > > powersave -c -t -S -T -F -x > DYNAMIC > ACPI > Throttling not supported > Thermal Device no. 0: > Temperature: 53 > State: ACTIVE > Critical: 95 > Passive: 90 > Active 0: 45 > Fan no 0: on > Performance active AC_default_scheme > Acoustic > Presentation > Powersave battery_default_scheme > > Tnx

1 0

Speedfreq for AMD64
by zio budda 30 Mar '05

30 Mar '05

Hi, I have a Asus Notebook with AMD64 Mobile processor. If i use the notebook from power my processor always set 2000MHz, with no-power set 800Mhz. I want to set a dinamic switch like Centrino. Is it possible ? I've run kpowersave but without fortune. Always 2000Mhz with Powersave active. At this moment my uptime: load average: 0,18, 0,70, 0,45 My CPU temperature: cat /proc/acpi/thermal_zone/THRM/temperature temperature: 53 C (is this normal???) My Processor: cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 4 model name : Mobile AMD Athlon(tm) 64 Processor 3200+ stepping : 10 cpu MHz : 1994.890 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow bogomips : 3942.40 TLB size : 1088 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp Sorry for my bad english. Tnx.

2 1

SuSE 9.2 runs a script '/usr/bin/find / ( -fstype nfs -o -fstype NFS'
by Simeon Nifos 30 Mar '05

30 Mar '05

Dear list, Since SuSE 9.0 a very annoying feature has been added! It may be useful for everything else than desktops out of networks and stuff like that! This is /usr/bin/find / ( -fstype nfs -o -fstype NFS -o -fstype proc -o -fstype afs While I am working and do some performance measurements some daemon or something else I do not know what activates the #find -fstype nfs and something else! I do not remember the exact syntax because I do not have that laptop with me at the moment but believe me it is very annoying becuase it happens all the time! Could anybody let me know how I could shut it off once and forall? Thanks in advance! Simeon! __________________________________ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs

4 3

AMD64 SuSE 9.2 and power management!
by Simeon Nifos 30 Mar '05

30 Mar '05

Dear list, I have an Opteron server here! It has an Mustek PowerMust 1000 USB UPS attached. Unfortunately I do not know how to activate powermanagement! I tried from the yast but I see no battery icon as I see on a laptop! What should I do? Further going to power control in control center pressing the "laptop battery" I get the following message: in the second, third, ... tab of the dialog box that appears: Your computer seems to have a partial ACPI installation. ACPI was probably enabl ed, but some of the sub-options were not - you need to enable at least 'AC Adapt or' and 'Control Method Battery' and then rebuild your kernel. Now the questions are: 1) how to activate battery indicator? 2) how to instruct the powersave daemon to shut down the system when power supply is off? 3) Is there a way that the machine boots automatically when power is on again and then a script runs which will continue a broken simulation? TO make it simpler I am running a simulation and electricity is off suddenly. Then I want my UPS to instruct my Server to shut-down. If Electricity is on again then I want my UPS to boot my Server and when the server finally boots then I want a script to run automatically which will continue the simulation which was interrupted! Any ideas? __________________________________ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs

2 1

USB mouse device stops working
by Thomas Föcking 30 Mar '05

30 Mar '05

Hi, I've got a problem with my fresh installed suse 9.2 on athlon64. My optical usb mouse - don't ask me for the vendor ;-) - doesn't work after a few minutes. #/var/log/messages Mar 29 03:54:14 linux kernel: input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse Optical] on usb-0000:00:10.0-2 Mar 29 04:04:16 linux kernel: usb 1-2: USB disconnect, address 5 Mar 29 04:04:17 linux kernel: usb 1-2: new low speed USB device using address 6 Mar 29 04:04:17 linux /sbin/hotplug[15079]: unknown command Mar 29 04:04:17 linux /sbin/hotplug[15080]: unknown command Mar 29 04:04:22 linux kernel: usb 1-2: control timeout on ep0out Mar 29 04:04:27 linux kernel: usb 1-2: control timeout on ep0out Mar 29 04:04:28 linux kernel: usb 1-2: device not accepting address 6, error -110 Mar 29 04:04:28 linux kernel: usb 1-2: new low speed USB device using address 7 Mar 29 04:04:33 linux kernel: usb 1-2: control timeout on ep0out Mar 29 04:04:38 linux kernel: usb 1-2: control timeout on ep0out Mar 29 04:04:38 linux kernel: usb 1-2: device not accepting address 7, error -110 I disabled usb 2.0 support in the bios, but this didn't solve the problem. Any hint? Is it a kernel 2.6 / usb 2.0 problem? Or is it microsoft's fault, and i have to buy a new mouse ;-) Thanks for your help in advance Thomas

4 3

Re: [suse-amd64] nvidia driver don't work for me
by tony s 30 Mar '05

30 Mar '05

Hi Rangi, Thanks for your reply. Doing an Graphics card upgrade on a laptop is going to be tough. Don't think its possible on my laptop.Also, while googling I found that some people had no problems using the lastest nvidia drivers with GeForce 440. This tells me that my GeForce 440 is supported ! May be upgrading the X server and building a new suse kernel will help. -t >From: Rangi Sutton <rangi.sutton(a)optusnet.com.au> >To: tony s <ndxp(a)hotmail.com> >Subject: Re: [suse-amd64] nvidia driver don't work for me >Date: Mon, 28 Mar 2005 12:56:14 +1000 >MIME-Version: 1.0 >Received: from mail19.syd.optusnet.com.au ([211.29.132.200]) by >mc4-f32.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Sun, 27 Mar 2005 >18:58:15 -0800 >Received: from [192.168.0.5] (c220-237-72-204.kelvn1.qld.optusnet.com.au >[220.237.72.204])by mail19.syd.optusnet.com.au (8.12.11/8.12.11) with ESMTP >id j2S2uE5J024062for <ndxp(a)hotmail.com>; Mon, 28 Mar 2005 12:56:14 +1000 >X-Message-Info: JGTYoYF78jEHjJx36Oi8+Z3TmmkSEdPtfpLB7P/ybN8= >User-Agent: Mozilla Thunderbird 1.0 (X11/20041206) >X-Accept-Language: en-us, en >References: <BAY21-F6C80CC2263B19F3C58D99CD430(a)phx.gbl> >Return-Path: rangi.sutton(a)optusnet.com.au >X-OriginalArrivalTime: 28 Mar 2005 02:58:16.0025 (UTC) >FILETIME=[FCFCE490:01C53341] > >tony s wrote: > >>Hello >> >>sorry if this is a repeat post, my previous podt did not do thru ! >> >>I have a HP zv5000 laptop with WUXGA (1920x1200 - GeForce 440 Go 64) LCD >>display. My problem is that I cannot get the latest nvidia drivers to >>work. After installing the driver, vertical lines >>appear on the screen :-( . Even old drivers don't work. I'm using SUSE9.1 >>64 version(AMD64). Have tried with FC3 also, still no luck. I have >>followed all the steps mention >>in various forums on the net, but the dam drivers don't work. > >Hi Tony, > >I can't remember the exact details, but I had found my laptop with a >GeForce 440 card would no longer work with the newer nvidia drivers. The >first version where the drivers no longer support the 440 is also the first >version they begin to support the 2.6 kernel. Sorry, I don't know the >version number. My solution involved a hardware upgrade. > >Probably not what you wanted to hear. I found this through trial and error >on one machine only, so I could be wrong. > >Good luck, >Rangi. >

3 2