July 2004 - openSUSE AMD64 - openSUSE Mailing Lists

Re: [suse-amd64] upgrade to 9.1 on hp zv5000 no screen FIXED
by bob sandefur 27 Jul '04

27 Jul '04

Dumb I was. By scrolling down past the lower resolution choices one reaches 1680x1050 Which works fine. Robert (Bob) L. Sandefur PE Senior Geostatistician / Reserve Analyst CAM 200 Union Suite G-13 Lakewood, Co 80228 rsandefur(a)cam-llc.com

1 0

Is there anybody who know how does xine or mplayer under Suse 64 works
by tribun-germania-inferior 27 Jul '04

27 Jul '04

Hello all together, perhaps there is someone out ther who knows how mplayer or xine under Suse 64 works. I have tryed to install from Pack Mans Page, but it doesnt works. Perhaps there is someone who declare it for an newbie. thanks a lot Heiko

3 2

upgrade to 9.1 on hp zv5000 no screen
by bob sandefur 27 Jul '04

27 Jul '04

Hi- I tried to upgrade from 9.0 to 9.1 on my NP zv5000 AMD64 upgrade went well until booting installed system. Then screen was blank for about 10min. No problem as a clean install is not a bad idea but I get same resull. I suspect the 1600x1050 lcd screen is the issue. Any suggestions b4 I try another clean install? Thanx Robert (Bob) L. Sandefur PE Senior Geostatistician / Reserve Analyst CAM 200 Union Suite G-13 Lakewood, Co 80228 rsandefur(a)cam-llc.com 303 472-3240 (cell) <-best choice 303 716-1617 ext 14

3 2

Powernow-k8 full speed on AC only
by Cosmo King 27 Jul '04

27 Jul '04

I have the Mitac 855 Athlon64 laptop (same machine as Erich). I have successfully got dynamic power throttling and full cpu speed working in kernels 2.6.4-54.5 and 2.6.8-rc2 but only when the power is applied. If I remove power, the system drops to 800MHz and remains there, no matter what power profiles are configured, or what speed is passed to /sys/devices/system/cpu/cpu0/cpufreq. I was forced to set other=ignore in /etc/powersaved.conf as suggested by Andi Kleen (thanks!) but that's all I changed, besides trying to force full speed in the battery profile. Also, when I boot up on battery, the speed remains at 800MHz even if I restart powersaved. Similarly if I suspend to disk, and then resume. (More on suspend/standby later ;) Any Ideas?? Thanks! Cosmo -- Cosmo King Systems Engineer Pogo Linux, Inc. 888.828.7646 cosmo*pogolinux*com

2 1

9.1 and ASUS L5800DF: pcmcia
by Sebastian Henschel 26 Jul '04

26 Jul '04

hello list... unfortunately, i could not get pcmcia to work on an ASUS L5800DF with mobile athlon64. when i insert any pcmcia-card, i get: cs: unable to map card memory following the discussions at http://lists.infradead.org/pipermail/linux-pcmcia/2004-July/001000.html, i modified config.opts (attached). i get the following output when i insert e.g. a network card: Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1854] Yenta: ISA IRQ mask 0x0098, PCI irq 9 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:01.1 [1043:1854] Yenta: ISA IRQ mask 0x0098, PCI irq 11 Socket status: 30000416 cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff cs: memory probe 0xf8a00000-0xf95ff000: excluding 0xf8a00000-0xf969dfff cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! cs: unable to map card memory! also attached is the output of lspci -vv. the issue mentioned here: http://bugme.osdl.org/show_bug.cgi?id=2944 does not seem to be relevant, because i did not try any cardbus-card for now. i also tried a little bit with acpi_irq_balance + acpi_irq_isa which helped on other asus machines. acpi=off, pci=biosirq also do not seem to make any difference. the latest pcmcia-cs 3.2.8 was also tried, but without success. does anyone of you had similar experiences with suse 9.1 64-bit on laptops? thanks for hints, sebastian -- ::: .O. ::: ..O ::: OOO ::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import

2 1

eclipse 3.0
by einar 26 Jul '04

26 Jul '04

Hello, did anyone succeed in running eclipse 3.0? regards, einar

2 4

Anyone running MSI K8T Master2
by Olivier Delcourt 26 Jul '04

26 Jul '04

Hi, I've parsed the archives titles but have not found anybody speaking about MSI K8T Master 2 dual-opteron motherboard. Basically, I want to know if someone has tested this board with SuSE 9.1 or SuSE Server for AMD 64. Thanks for the information. Olivier.

5 9

SuSE 9.1 on Sun Fire V20z Server
by Oliver Marahrens 26 Jul '04

26 Jul '04

Hello everybody, I have a problem installing SuSE 9.1 Professional AMD64 on a Sun Fire V20z Server. According to Sun it is possible to run SuSE Pro 9.0 in its 64bit-version on that server (http://www.sun.com/servers/entry/v20z/) but trying it it doesn't work. Has anyone experiences with that constellation? A bit more information about the error that occurs: We can enter Yast Setup, but after choosing language and selecting the installation source (I tried it via NFS, DVD and FTP) a red window pops up and says that installation is not possible and it's aborting. The 32bit- version of SuSE 9.1 Pro runs, but I would rather want to install the 64 bit version... Can anyone help me, please? Thanks in advance, regards, Oliver Marahrens -- Besuchen Sie unseren DISCUS Prototyp unter http://discus.tu-harburg.de -- Oliver Marahrens TU Hamburg-Harburg / Universitätsbibliothek / EDV / DISCUS Denickestr. 22 21071 Hamburg - Harburg Tel. +49 (0)40 / 428 78 - 32 91 eMail o.marahrens(a)tu-harburg.de

1 0

Wie kann man sich DVDs unter dem 64bit Suse ansehen
by tribun-germania-inferior 26 Jul '04

26 Jul '04

Hallo, kennt jemand von Euch ein Programm welches unter suse 9.1 64bit DVDs abspielen kann? Ich habe bisher xine benutzt. Das funktionierte wunderbar, leider nicht unter der 64bit Version von suse. Zum kompilieren von Quellcode fehlt mir die Erfahrung. Deswegen die Frage, gibt es irgenwo ein kompiliertes 64bit Xinepaket oder ein anderes Programm? Gruß Heiko

7 6

SuSE 9.1 on ASUS K8V SE Deluxe / Gigabit / Cool&Quiet
by Laurent GUERBY 26 Jul '04

26 Jul '04

Hi, I finally assembled an amd64 machines: ASUS K8V SE Deluxe motherboard, Athlon 64 3000+, IDE disk, 2x512MB PC3200 Kingston memory, SuSE 9.1 64 bit from DVD installed fine. After booting I installed all patches, reboot went fine. I bought a cheap PCI gigabit card (RTL-8169, 21 euros) for my other machine and was able to do 58 MB/s from the other machine to the amd64, and 37 MB/s from the amd64 (measured with netcat < /dev/zero). My switch is a cheap Netgear GS105 (75 euros) and I use cat 5E cables. Is there any tweaking I should try to improve performance (like frame size)? Not that I need it :). I did not try SATA, Firewire, USB, sound (yet). Is Cool&Quiet supposed to work with this mobo/processor/kernel? I activated the option in the BIOS, but looks like SuSE says it isn't supported. Laurent # powersave -c Speed stepping is not supported. Jul 26 00:47:05 pc64 kernel: powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09d) Jul 26 00:47:05 pc64 kernel: powernow-k8: BIOS error - no PSB Jul 26 00:47:06 pc64 rcpowersaved: enter 'powernow-k8' into POWERSAVE_CPUFREQD_MODULE in /etc/sysconfig/powersave/common. Jul 26 00:47:06 pc64 rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog. Jul 26 00:47:06 pc64 [powersaved][2666]: WARNING in Function ACPI_Interface; line 26: could not set battery alarm, you may need to force polling mode. Jul 26 00:47:06 pc64 [powersaved][2666]: resmgr: server response code 200 Jul 26 00:47:06 pc64 [powersave_proxy][2682]: WARNING: hdparm returned error 5 processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 12 model name : AMD Athlon(tm) 64 Processor 3000+ stepping : 0 cpu MHz : 2002.652 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow bogomips : 3932.16 TLB size : 1088 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp

1 0