openSUSE Users (Dansk)

Download

users-da@lists.opensuse.org

October 2008

3 participants
68 discussions

[opensuse-da] yast - printer.da.po (igen-igen)
by Jan Madsen 03 Nov '08

03 Nov '08

# #. CheckBox to enable that a print queue is automatically created #. when a USB printer is connected for the first time to the USB: #: src/autoconfig.ycp:60 -#, fuzzy msgid "Enable &Automatic Configuration of New Attachend USB Printers" -msgstr "Aktivér &automatisk konfiguration af nye printere" +msgstr "Aktivér &automatisk konfiguration af nyligt tilsluttede USB-printere" #. CheckBox to disable the print queue #. when a USB printer is disconnected from the USB: #: src/autoconfig.ycp:68 -#, fuzzy msgid "&Disable Printout when Disconnecting an USB Printer" msgstr "&Deaktivér udskrift når USB-printer frakobles" #. Header for a ComboBox to specify the CUPS operation policy #. for print queues which are automatically created #. when a USB printer is connected for the first time to the USB: #: src/autoconfig.ycp:77 msgid "Operation &Policy for Automatically Configured USB Printers" -msgstr "" +msgstr "Handlings&politik for automatisk konfigurerede USB-printere" #. Popup::Error message #. Do not change or translate "cups-autoconfig", it is a RPM package name. #: src/autoconfig.ycp:91 msgid "This dialog is useless without having the package cups-autoconfig installed" -msgstr "" +msgstr "Denne dialog er nytteløs, uden at have pakken cups-autoconfig installeret" #. Popup::ErrorDetails message #. Do not change or translate "ConfigureNewPrinters=yes", it is a system settings name. #: src/autoconfig.ycp:188 -#, fuzzy msgid "Failed to set 'ConfigureNewPrinters=yes' in /etc/cups-autoconfig.conf" -msgstr "Mislykkedes at sætte 'ServerName %1' i /etc/cups/client.conf" +msgstr "Mislykkedes at sætte 'ConfigureNewPrinters=yes' i /etc/cups-autoconfig.conf" #. Popup::ErrorDetails message #. Do not change or translate "ConfigureNewPrinters=no", it is a system settings name. #: src/autoconfig.ycp:198 -#, fuzzy msgid "Failed to set 'ConfigureNewPrinters=no' in /etc/cups-autoconfig.conf" -msgstr "Mislykkedes at sætte 'Browsing On' i /etc/cups/cupsd.conf" +msgstr "Mislykkedes at sætte 'ConfigureNewPrinters=no' i /etc/cups-autoconfig.conf" #. Popup::ErrorDetails message #. Do not change or translate "DisablePrintersOnRemoval=yes", it is a system settings name. #: src/autoconfig.ycp:210 -#, fuzzy msgid "Failed to set 'DisablePrintersOnRemoval=yes' in /etc/cups-autoconfig.conf" -msgstr "Mislykkedes at sætte 'ServerName %1' i /etc/cups/client.conf" +msgstr "Mislykkedes at sætte 'DisablePrintersOnRemoval=yes' i /etc/cups-autoconfig.conf" #. Popup::ErrorDetails message #. Do not change or translate "DisablePrintersOnRemoval=no", it is a system settings name. #: src/autoconfig.ycp:220 -#, fuzzy msgid "Failed to set 'DisablePrintersOnRemoval=no' in /etc/cups-autoconfig.conf" -msgstr "Mislykkedes kun at sætte 'Listen localhost' i /etc/cups/cupsd.conf" +msgstr "Mislykkedes at sætte 'DisablePrintersOnRemoval=no' i /etc/cups-autoconfig.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by the cups-autoconfig error policy value. #. Do not change or translate "DefaultCUPSPolicy", it is a system settings name. #: src/autoconfig.ycp:238 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to set 'DefaultCUPSPolicy=%1' in /etc/cups-autoconfig.conf" -msgstr "Mislykkedes at sætte 'DefaultPolicy %1' i /etc/cups/cupsd.conf" +msgstr "Mislykkedes at sætte 'DefaultCUPSPolicy=%1' i /etc/cups-autoconfig.conf" #. Popup message #. where %1 will be replaced by the queue name. #: src/overview.ycp:326 -#, fuzzy, ycp-format +#, ycp-format msgid "Sent testpage to %1. It should start to print soon." -msgstr "Testside til %1 er sendt. Udskrift skulle starte om et øjeblik." +msgstr "Sendte testside til %1. Udskrift skulle starte om et øjeblik." #. CheckBox to apply the CUPS error policy which is selected in the ComboBox above #. to all local printer configurations (i.e. to all local print queues). #. When possible we perefer to use the wording "printer configuration" #. instead of "print queue" because the latter may sound too technical #. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: #: src/policies.ycp:85 -#, fuzzy msgid "&Apply this error policy to all local printer configurations" -msgstr "En ekstern CUPS serverindstilling konflikter med deling af lokale printerkonfigurationer." +msgstr "&Anvend denne fejlpolitik på alle lokale printerkonfigurationer." #. CheckBox to apply the CUPS operation policy which is selected in the ComboBox above #. to all local printer configurations (i.e. to all local print queues). #. When possible we perefer to use the wording "printer configuration" #. instead of "print queue" because the latter may sound too technical #. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: #: src/policies.ycp:105 -#, fuzzy msgid "Apply this operation &policy to all local printer configurations" -msgstr "En ekstern CUPS serverindstilling konflikter med deling af lokale printerkonfigurationer." +msgstr "Anvend denne handlings&politik på alle lokale printerkonfigurationer." #. PopupYesNoHeadline body: #: src/policies.ycp:127 -#, fuzzy msgid "A remote CUPS server setting conflicts with setting policies for the local system." -msgstr "En ekstern CUPS serverindstilling konflikter med modtagelse af printerinformation." +msgstr "En ekstern CUPS serverindstilling konflikter med opsætningspolitikken for det lokale system." #. Popup::ErrorDetails message #. where %1 will be replaced by the print queue name. #: src/policies.ycp:267 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to apply the policy to '%1'" -msgstr "Anvendelse af indstillingen i systemet fejlede." +msgstr "Anvendelse af fejlpolitikken på '%1' fejlede." =============================================================================== Diff created and cleaned up --------------------------- Total number of messages minus fake ones equals total number of real messages. 15 - 0 = 15 Messages that did not need clean up: Changed: 3 : Fyzzy : 12 Messages that was cleaned up : Changed: 0 : Fyzzy : 0 : --------------------------------- Total : 15 ===============================================================================

2 2

[opensuse-da] yast - printer.da.po (igen)
by Jan Madsen 03 Nov '08

03 Nov '08

# translation of printer.po to dansk # translation of printer.po to # translation of printer.da.po to # translation of printer.da.po to # Danish message file for YaST2 (@memory@). # Copyright (C) 2002 SuSE Linux AG. # Copyright (C) 2002 SuSE GmbH. # # Olav Pettershagen <olav.pet(a)online.no>, 2004. # Olav Pettershagen <olav.pettershagen(a)trysil.online.no>, 2004. # Keld Simonsen <keld(a)dkuug.dk>, 2004. # Martin Schlander <suse(a)linuxin.dk>, 2006, 2007. # Jan Madsen <jan.madsen.pt(a)gmail.com>, 2006. # Martin Moeller <martin(a)martinm-76.dk>, 2006. # Jan Madsen <jan.madsen.pt(a)gmail.com>, 2008. # Martin Schlander <mschlander(a)opensuse.org>, 2008. msgid "" msgstr "" "Project-Id-Version: printer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-16 13:08+0200\n" -"PO-Revision-Date: 2008-10-15 23:24+0100\n" +"PO-Revision-Date: 2008-10-22 21:49+0100\n" "Last-Translator: Jan Madsen <jan.madsen.pt(a)gmail.com>\n" "Language-Team: dansk <opensuse-translation(a)opensuse.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: KBabel 1.11.4\n" #. 1. progress stage name of a Progress::New: #: src/Printer.ycp:608 msgid "Check installed packages" -msgstr "" +msgstr "Tjek installerede pakker" #. 2. progress stage name of a Progress::New: #: src/Printer.ycp:610 msgid "Determine basic print system settings" -msgstr "" +msgstr "Bestem basale indstillinger for udskriftsystem" #. 1. progress step progress bar title of a Progress::New: #: src/Printer.ycp:613 msgid "Checking installed packages..." -msgstr "" +msgstr "Tjekker installerede pakker..." #. 2. progress step progress bar title of a Progress::New: #: src/Printer.ycp:615 msgid "Determining basic print system settings..." -msgstr "" +msgstr "Bestemmer basale indstillinger for udskriftsystem..." #. Message of a Popup::Error where %1 will be replaced by the package name: #: src/Printerlib.ycp:96 #, ycp-format msgid "Required package %1 is not installed and there is no package repository available." -msgstr "" +msgstr "Den krævede pakke %1 er ikke installeret, og der er ingen pakkekilde tilgængelig." #. Message of a Popup::Error where %1 will be replaced by the package name: #: src/Printerlib.ycp:105 #, ycp-format msgid "Required package %1 is not installed and not available in the repository." -msgstr "" +msgstr "Den krævede pakke %1 er ikke installeret, og den er ikke tilgængelig i softwarekilden." #. Message of a Popup::Error where %1 will be replaced by the package name. #. Only a simple message because: #. Either the user has explicitely rejected to install the package, #. or this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printerlib.ycp:118 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to install required package %1." -msgstr "Udskrift af testside for %1 fejlede." +msgstr "Installation af den kræved pakke %1 fejlede." #: src/dialogs.ycp:158 src/dialogs.ycp:159 msgid "Policies" -msgstr "" +msgstr "Politikker" #. Overview dialog help 1/7: #: src/helps.ycp:56 -#, fuzzy msgid "" "\n" "<big>Print Queue Overview</big> \n" "A printer device is not used directly but via a print queue. \n" "When various application programs submit print jobs simultaneously,\n" "these jobs are put in a queue and are sent one after the other to the printer\n" "device. \n" "It is possible to have several different print queues for the same printer\n" "device.\n" "For example a second queue with a monochrome-only driver for a color device\n" "or a PostScript queue and a queue with a PCL driver for a PostScript+PCL\n" "printer or a queue to print on one side only of a sheet of paper and one for two sided\n" "printing.\n" "" msgstr "" "\n" "<big>Oversigt over udskriftskøer</big> \n" "En udskriftsenhed bruges ikke direkte, men via en udskriftskø. \n" "Når forskellige programmer tildeler udskriftsopgaver samtidigt,\n" "sættes opgaverne i en kø og sendes en af gangen til udskriftsenheden. \n" "Det er muligt, at have flere forskellige udskriftskøer til samme udskriftsenhed.\n" "For eksempel en anden kø med kun-monokrom driver til en farveenhed eller en\n" -"PostScript-kø og en kø med en PCL-driver til en PostScript+PCL-printer.\n" +"PostScript-kø og en kø med en PCL-driver til en PostScript+PCL-printer,\n" +"eller en kø til udskrivning på kun en side af papiret og en til tosidet udskrift.\n" "" #. ConnectionWizardDialog help 5/6: #: src/helps.ycp:332 -#, fuzzy msgid "" "\n" "<big>Device URIs to Print Via a Print Server Machine</big> \n" "In contrast to a printserver box a print server machine\n" "means a real computer which offers a print service. \n" "Access happens via various different network protocols.\n" "Ask your network administrator what which print server machine\n" "provides in your particular network: \n" "Microsoft Windows/SAMBA (SMB/CIFS) \n" "A server name and a printer share name and optionally a workgroup name\n" "is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "A matching full device URI is: \n" "smb://username:password@workgroup/server/printer \n" "For more information have a look at <tt>man smbspool</tt> and \n" "http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n" "Traditional UNIX Server (LPR) \n" "A Line Printer Daemon (LPD) runs on a traditional UNIX server\n" "and provides one or more LPD queues.\n" "The IP address and a LPD queue name is needed to access it.\n" "The matching device URI is: \n" "lpd://ip-address/queue \n" "CUPS Server \n" "Usually you should not set up a local print queue to access\n" "a remote queue on a CUPS server. Instead do the setup\n" "in the Print Via Network dialog.\n" "Only if you really know that you must set up a local print queue\n" "to access a remote queue on a CUPS server proceed here. \n" "IPP is the native protocol for CUPS which runs on a server.\n" "The official IANA port for IPP is 631.\n" "The matching device URI is: \n" "ipp://ip-address:631/printers/queue \n" "Novell Netware Print Server (IPX) \n" "To access print queues on a Novell Netware print server,\n" "the RPM package ncpfs must be installed.\n" "The package provides the CUPS backend 'novell' which runs\n" "CUPS 1.1.18\n" "the <tt>nprint</tt> program which actually sends the data\n" "to a Novell Netware print queue.\n" "A server name and a printer queue name is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "The matching device URI is: \n" "novell://username:password@server/queue \n" "For more information have a look at <tt>man nprint</tt> and\n" "the other documentation in the RPM package ncpfs.\n" "" msgstr "" "\n" "<big>Enheds-URIer til udskrift via en udskriftservermaskine</big> \n" "I modsætning til en printserverboks er en printservermaskine\n" "en reel computer, der tilbyder en udskrifttjeneste. \n" "Adgang foregår via flere forskellige netværksprotokoller.\n" "Spørg din netværksadministrator, hvad hvilken printservermaskine\n" "tilbyder på dit netværk: \n" "Microsoft Windows/SAMBA (SMB/CIFS) \n" "For at tilgå dette kræves et servernavn, en printerdelingsnavn og\n" "valgfrit et navn på en arbejdsgruppe.\n" "Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" "En passende komplet enheds-URI er: \n" "smb://brugernavn:adgangskode@arbejdsgruppe/server/printer \n" "For mere information kig på <tt>man smbspool</tt> og \n" "http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n" "Traditionel UNIX-server (LPR) \n" "En linjeprinterdæmon (LPD) kører på en traditionel UNIX-server\n" "og tilbyder en eller flere LPD-køer.\n" "Der kræves en IP adresse og et LPD-kønavn for at tilgå det.\n" "Den passende enheds-URI er: \n" "lpd://ip-adresse/kø \n" "CUPS-server \n" "Normalt skal du ikke sætte en lokal udskriftskø op for at tilgå\n" "en ekstern kø på en CUPS-server. Lav i stedet opsætningen\n" "i dialogen Udskrift via netværk.\n" "Fortsæt kun her, hvis du er sikker på, at du skal sætte en lokal\n" "udskriftskø op for at tilgå en ekstern kø på en CUPS-server. \n" -"IPP er den opringdelige protokol for CUPS, der kører på en server.\n" +"IPP er den oprindelige protokol for CUPS, der kører på en server.\n" "Den officielle IANA-port til IPP er 631.\n" "Den passende enheds-URI er: \n" -"ipp://ip-adresse:631/printers/kø \n" +"ipp://ip-adresse:631/printere/kø \n" "IPX (Novell Netware Print Server) \n" "RPM-pakken ncpfs skal installeres for at tilgå udskriftskøer på\n" "en Novell Netware printserver.\n" -"Pakken levereren CUPS-backend - 'novell' - der kører programmet\n" +"Pakken levereren CUPS-backend - 'novell' - der kører\n" +"CUPS 1.1.18-programmet\n" "<tt>nprint</tt>, der faktisk sender dataene til en Novell\n" "Netware udskriftskø.\n" "Der kræves servernavn og navn på udskriftskø for at få adgang.\n" "Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" "Den passende enheds-URI er: \n" "novell://brugernavn:adgangskode@server/kø \n" "For mere information kig på <tt>man nprint</tt> og\n" "den anden dokumentation i RPM-pakken ncpfs.\n" "" #. ConnectionWizardDialog help 6/6: #: src/helps.ycp:378 -#, fuzzy msgid "" "\n" "<big>Special Device URIs</big> \n" "Specify an Arbitrary Device URI\n" "if you know the exact right device URI for your particular case\n" "or to modify an existing device URI in a special way. \n" "Send Print Data to Other Program (pipe) \n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'pipe' which runs\n" "the program that you specified here.\n" "The matching device URI is: \n" "pipe:/path/to/targetcommand \n" "Daisy-chain Backend Error Handler (beh) \n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'beh'. \n" "The backend 'beh' is a wrapper for the usual backend,\n" "which is then called by beh.\n" "This way beh can, depending on its configuration,\n" "repeat the call of the backend or simply hide the error status\n" "of the backend from being seen by the CUPS daemon.\n" "The matching device URI is: \n" "beh:/nodisable/attempts/delay/originalDeviceURI \n" "If nodisable is '1' beh always exits successfully\n" "so that the queue gets never disabled but on the other hand\n" "print jobs are lost if there is an error. \n" "Attempts is the number of attempts to recall the backend\n" "in case of an error. '0' means infinite retries. \n" "Delay is the number of seconds between two attempts\n" "to call the backend. \n" "The last parameter is the original URI, which the queue had before. \n" "Example: \n" "beh:/1/3/5/socket://ip-address:port-number \n" "The beh backend tries to access a network printer 3 times with 5 second delay\n" "between the attempts. If access still fails, the queue is not disabled\n" "and the print job is lost. \n" "For more information have a look at <tt>/usr/lib[64]/cups/backend/beh</tt> and \n" "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n" "" msgstr "" "\n" "<big>Specielle enheds-URIer</big> \n" "Angiv en vilkårlig enheds-URI,\n" "hvis du kender det helt rigtige enheds-URI for dit tilfælde, eller\n" "du vil ændre et eksisterende enheds-URI på en bestemt måde. \n" "Send udskriftdata til andet program (pipe) \n" "For at gøre dette skal RPM-pakken cups-backends installeres.\n" "Pakken leverer en CUPS-backend - 'pipe' - der kører det\n" "program, du har angivet her.\n" "Den passende enheds-URI er: \n" "pipe:/sti/til/målkommando \n" "Fejlhåndtering for Daisy-chain-backend (beh) \n" "For at gøre dette skal RPM-pakken cups-backends installeres.\n" "Pakken leverer en CUPS-backend 'beh'. \n" "Denne backend - 'beh' - er et omslag for den alm. backend,\n" "der så kaldes af beh.\n" "På denne måde kan beh, afhængigt af dens konfiguration,\n" "gentage kaldet af backend, eller ganske enkelt forhindre, at\n" "backendens fejlstatus kan ses af CUPS-dæmonen.\n" "Den passende enheds-URI er: \n" "beh:/deaktivér_ikke/forsøg/forsinkelse/original_enheds-URI \n" "Hvis 'deaktivér_ikke' er '1', vil beh altid afslutte, så køen\n" "aldrig deaktiveres, men på den anden side mistes\n" "udskriftsopgaver, hvis der er en fejl. \n" "'Forsøg' er antal forsøg på at genkalde backenden i\n" "tilfælde af fejl. '0' betyder uendelige genforsøg. \n" "'Forsinkelse' er antal sekunder mellem to forsøg\n" "på at kalde backenden. \n" "Den sidste parameter er den originale URI, som køen havde før. \n" "Eksempel: \n" "beh:/1/3/5/sokkel://ip-adresse:portnummer \n" "Backenden beh prøver at tilgå netværksprinteren printer 3 gange\n" "med 5 sek. forsinkelse mellem forsøgene. Hvis tilgang stadig fejler,\n" "deaktiveres køen ikke, og udskriftsopgaverne mistes. \n" "For mere information kig på <tt>/usr/lib[64]/cups/backend/beh</tt> og \n" "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n" "" #. Policies help 2/2: #: src/helps.ycp:474 msgid "" "\n" "<big>CUPS Error Policy</big> \n" "The error policy defines the default policy that is used when\n" "CUPS fails to send a print job to the printer device. \n" "Depending on the particular way how the printer is connected\n" "(for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'),\n" "and depending on the actual kind of failure,\n" "the CUPS backend which actually sends the data to the printer\n" "can overwrite the default error policy\n" "and enforce another error policy (see 'man backend').\n" "For example it can stop any further printing attempt\n" "even when the default error policy is to retry the job.\n" "This could happen when any attempt to establish\n" "the communication with the printer is useless\n" "so that it does no make sense to retry the job.\n" " \n" "The following error policies exist: \n" "Stop the printer and keep the job for future printing. \n" "Re-send the job from the beginning after waiting some time (30 seconds by default). \n" "Abort and delete the job and proceed with the next job.\n" "" msgstr "" +"\n" +"<big>CUPS fejlpolitik</big> \n" +"Fejlpolitik definerer den standardpolitik, der anvendes, når\n" +"CUPS fejler i at sende et udskriftjob til printerenheden. \n" +"Afhængigt af måden printeren er tilsluttet (f.eks. 'usb',\n" +"'sokkel', 'lpd' eller 'ipp'), og afhængigt af den aktuelle\n" +"fejl, kan den backend til CUPS, som faktisk sender data til\n" +"printeren, overskrive standard-fejlpolitikken og\n" +"gennemtvinge en anden fejlpolitik\n" +"(se 'man backend').\n" +"Den kan f.eks. stoppe videre forsøg på udskrivning,\n" +"selvom standard-fejlpolitikken er at forsøge igen.\n" +"Dette kan ske, når et forsøg på at etablere en\n" +"kommunikation med printeren er nytteløs, således\n" +"er der ingen fornuft i at forsøge jobbet igen.\n" +" \n" +"Følgende fejlpolitikker findes: \n" +"Stop printeren, og gem jobbet til senere udskrivning. \n" +"Send jobbet igen fra begyndelsen efter at have ventet en tid (standard 30 sekunder). \n" +"Afbryd og slet jobbet, og gå videre til det næste job.\n" +"" #. An entry for a ComboBox from which the user can select that the CUPS error policy #. which is used when it fails to send a job to the printer is to #. stop the printer and keep the job for future printing: #: src/policies.ycp:46 msgid "stop the printer and keep the job for future printing" -msgstr "" +msgstr "stop printeren, og gem jobbet til senere udskrivning" #. An entry for a ComboBox from which the user can select that the CUPS error policy #. which is used when it fails to send a job to the printer is to #. re-send the job from the beginning after waiting some time #. (the default JobRetryInterval is 30 seconds but this can be changed): #: src/policies.ycp:51 msgid "re-send the job from the beginning after waiting some time" -msgstr "" +msgstr "send jobbet igen fra begyndelsen efter at have ventet en tid" #. An entry for a ComboBox from which the user can select that the CUPS error policy #. which is used when it fails to send a job to the printer is to #. abort and delete the job and proceed with the next job: #: src/policies.ycp:55 msgid "abort and delete the job and proceed with the next job" -msgstr "" +msgstr "afbryd og slet jobbet, og gå videre til det næste job" #. Header for a ComboBox to specify the CUPS operation policy: #: src/policies.ycp:64 -#, fuzzy msgid "Specify the &operation policy" -msgstr "Angiv handlingspolitikken" +msgstr "Angiv handlingsp&olitikken" #. Header for a ComboBox to specify the CUPS error policy: #: src/policies.ycp:73 -#, fuzzy msgid "Specify the &error policy" -msgstr "Angiv handlingspolitikken" +msgstr "Angiv f&ejlpolitikken" #. Popup::ErrorDetails message #. where %1 will be replaced by the default operation policy value. #. Do not change or translate "DefaultPolicy", it is a system settings name. #: src/policies.ycp:156 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to set 'DefaultPolicy %1' in /etc/cups/cupsd.conf" -msgstr "Mislykkedes at sætte 'Allow'-indgangene '%1' i /etc/cups/cupsd.conf" +msgstr "Mislykkedes at sætte 'DefaultPolicy %1' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by the default error policy value. #. Do not change or translate "ErrorPolicy", it is a system settings name. #: src/policies.ycp:169 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to set 'ErrorPolicy %1' in /etc/cups/cupsd.conf" -msgstr "Mislykkedes at sætte 'Browsing On' i /etc/cups/cupsd.conf" +msgstr "Mislykkedes at sætte 'ErrorPolicy %1' i /etc/cups/cupsd.conf" # #: src/printer_proposal.ycp:68 -#, fuzzy msgid "No printer queue configured." -msgstr "Færdiggør printerkonfiguration" +msgstr "Ingen printerkø konfigureret" #. An entry for a ComboBox from which the user can select #. that printer information is accepted from #. all remote CUPS servers: #: src/printingvianetwork.ycp:51 msgid "all hosts" -msgstr "" +msgstr "alle værter" #. An entry for a ComboBox from which the user can select #. that printer information is accepted from #. remote CUPS servers in the local network: #: src/printingvianetwork.ycp:55 -#, fuzzy msgid "hosts in the local network" -msgstr "Til computere indenfor det &lokale netværk" +msgstr "værter i det lokale netværk" #. An entry for a ComboBox from which the user can select #. that printer information is accepted only from #. remote CUPS servers with specific addresses #. where the specific addresses are specified in a TextEntry below: #: src/printingvianetwork.ycp:60 msgid "only specific addresses" -msgstr "" +msgstr "angiv kun adresser" #. A caption to allow remote access to local print queues #. for hosts and/or networks specified in two TextEntries below: #: src/sharing.ycp:155 -#, fuzzy msgid "For Experts: Optional Specific IP Addresses or Networks" -msgstr "Valgfrie specifikke IP-adresser eller &netværk/netmaske" +msgstr "For eksperter: Valgfrie specifikke IP-adresser eller netværk" #. TextEntry to allow remote access to local print queues #. for hosts and/or networks: #: src/sharing.ycp:162 -#, fuzzy msgid "Allow remote access from those IP addresses or &network/netmask" -msgstr "Valgfrie specifikke IP-adresser eller &netværk/netmaske" +msgstr "Tillad ekstern adgang fra disse IP-adresser eller &netværk/netmaske" #. TextEntry to publish local print queues #. to IP addresses and/or network broadcast addresses: #: src/sharing.ycp:180 msgid "Publish to those IP addresses or network &broadcast addresses" -msgstr "" +msgstr "Publicér til disse IP-adresser eller netværk-&broadcast-adresser" #. Label to show the syntax for the TextEntry to to publish #. local print queues to hosts and/or networks: #: src/sharing.ycp:191 -#, fuzzy msgid "(each nnn.nnn.nnn.nnn or nnn.nnn.nnn.255 separated by one space)" -msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm adskilt med ét mellemrum)" +msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.255 adskilt med ét mellemrum)" =============================================================================== Diff created and cleaned up --------------------------- Total number of messages minus fake ones equals total number of real messages. 29 - 1 = 28 Messages that did not need clean up: Changed: 15 : Fyzzy : 13 Messages that was cleaned up : Changed: 0 : Fyzzy : 0 : --------------------------------- Total : 28 ===============================================================================

2 2

[opensuse-da] yast/printer.da.po
by Jan Madsen 03 Nov '08

03 Nov '08

+# translation of printer.po to dansk # translation of printer.po to # translation of printer.da.po to # translation of printer.da.po to # Danish message file for YaST2 (@memory@). # Copyright (C) 2002 SuSE Linux AG. # Copyright (C) 2002 SuSE GmbH. # # Olav Pettershagen <olav.pet(a)online.no>, 2004. # Olav Pettershagen <olav.pettershagen(a)trysil.online.no>, 2004. # Keld Simonsen <keld(a)dkuug.dk>, 2004. # Martin Schlander <suse(a)linuxin.dk>, 2006, 2007. # Jan Madsen <jan.madsen.pt(a)gmail.com>, 2006. # Martin Moeller <martin(a)martinm-76.dk>, 2006. # Jan Madsen <jan.madsen.pt(a)gmail.com>, 2008. # Martin Schlander <mschlander(a)opensuse.org>, 2008. msgid "" msgstr "" "Project-Id-Version: printer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-02 13:02+0200\n" -"PO-Revision-Date: 2008-05-23 12:51+0200\n" -"Last-Translator: Martin Schlander <mschlander(a)opensuse.org>\n" -"Language-Team: <dansk(a)dansk-gruppen.dk>\n" +"PO-Revision-Date: 2008-10-15 23:24+0100\n" +"Last-Translator: Jan Madsen <jan.madsen.pt(a)gmail.com>\n" +"Language-Team: dansk <opensuse-translation(a)opensuse.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: KBabel 1.11.4\n" #. Header of a DownloadProgress indicator: #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:267 src/Printer.ycp:282 msgid "Retrieving printer driver information..." -msgstr "" +msgstr "Henter information om printer-drivere..." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:295 -#, fuzzy msgid "Failed to create PPD database." -msgstr "Filen %1 blev tilføjet i databasen" +msgstr "Oprettelse af PPD-database fejlede." #. Message of a Popup::Error where %1 will be replaced by the file name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:311 src/Printer.ycp:434 src/Printer.ycp:513 #: src/Printer.ycp:573 -#, fuzzy, ycp-format +#, ycp-format msgid "File %1 does not exist." -msgstr "Køen %1 findes ikke." +msgstr "Filen %1 findes ikke." #. Message of a Popup::Error where %1 will be replaced by the file name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:329 src/Printer.ycp:452 src/Printer.ycp:525 #: src/Printer.ycp:585 #, ycp-format msgid "Failed to read %1." -msgstr "" +msgstr "Læsning af %1 fejlede." #. Header for a finished ProgressBar: #: src/Printer.ycp:352 msgid "Retrieved printer driver information" -msgstr "" +msgstr "Hentede information om printer-drivere." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no printer was autodetected. #. The latter results no error. #: src/Printer.ycp:418 msgid "Failed to detect printers automatically." -msgstr "" +msgstr "Automatisk søgning efter printere fejlede." # #. Header for a finished ProgressBar: #: src/Printer.ycp:466 -#, fuzzy msgid "Detected printers" msgstr "Fundne printere" # #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:503 -#, fuzzy msgid "Failed to detect print queues." -msgstr "Lav kun liste over fundne printere" +msgstr "Søgning efter udskriftskøer fejlede." #. Popup::ErrorDetails message where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:561 #, ycp-format msgid "Failed to determine driver options for queue %1." -msgstr "" +msgstr "Bestemmelse af driver-valgmuligheder for køen %1 fejlede." # #. 1. progress stage name of a Progress::New: #: src/Printer.ycp:607 -#, fuzzy msgid "Autodetect already configured printers" -msgstr "Vis de fundne eller konfigurerede printere" +msgstr "Søg automatisk efter allerede konfigurerede printere" # #. 1. progress step progress bar title of a Progress::New: #: src/Printer.ycp:610 -#, fuzzy msgid "Autodetecting already configured printers..." -msgstr "Vis de fundne eller konfigurerede printere" +msgstr "Søger automatisk efter allerede konfigurerede printere..." # #. Define the progress stages: #. Header of a Progress::New: #: src/Printer.ycp:647 -#, fuzzy msgid "Finishing Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration" # #. 1. progress stage name of a Progress::New: #: src/Printer.ycp:651 -#, fuzzy msgid "Finish printer configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration" # #. 1. progress step progress bar title of a Progress::New: #: src/Printer.ycp:654 -#, fuzzy msgid "Finishing printer configuration..." -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration..." # #. Message of a Popup::Error. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:756 -#, fuzzy msgid "Cannot show print queues (failed to detect print queues)." -msgstr "Lav kun liste over fundne printere" +msgstr "Kan ikke vise udskriftskøer (søgning efter udskriftskøer fejlede)." #. When the queue is the default queue on the local host: #: src/Printer.ycp:788 msgid "Yes" -msgstr "" +msgstr "Ja" #. When printing is disabled for the queue: #: src/Printer.ycp:794 -#, fuzzy msgid "Printout disabled" -msgstr "Udskrift &færdig" +msgstr "Udskrift deaktiveret" #. When the queue rejects print jobs and printing is disabled: #: src/Printer.ycp:799 msgid "Rejecting print jobs, printout disabled" -msgstr "" +msgstr "Afviser udskriftsopgaver - udskrift deaktiveret" # #. When the queue rejects print jobs: #: src/Printer.ycp:803 -#, fuzzy msgid "Rejecting print jobs" -msgstr "Afvis udskriftsopgaver" +msgstr "Afviser udskriftsopgaver" #. Show a fallback text if there are no local queues: #: src/Printer.ycp:827 msgid "There is no print queue." -msgstr "" +msgstr "Der er ingen udskriftskø." # #. Message of a Popup::Error. #. Only a simple message because before the function AutodetectPrinters #. was called and this function would have shown more specific messages. #: src/Printer.ycp:865 -#, fuzzy msgid "Failed to autodetect printers." -msgstr "Lav kun liste over fundne printere" +msgstr "Automatisk søgning efter printere fejlede." # #. Message of a Popup::Error. #. Only a simple message because before the function CreateDatabase #. was called and this function would have shown more specific messages. #: src/Printer.ycp:1100 -#, fuzzy msgid "Failed to create the printer driver database." -msgstr "En fejl opstod under oprettelse af printerdatabasen." +msgstr "Oprettelse af printer-driver-databasen fejlede." #. If no driver was already selected, show a meaningful text as #. fallback entry for a SelectionBox when no connection is selected. #. It will be replaced by real content, when a connection is selected. #: src/Printer.ycp:1125 msgid "Select a connection, then matching drivers show up here." -msgstr "" +msgstr "Vælg en tilslutning, så vises passende drivere her." #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:1137 msgid "Determine available drivers..." -msgstr "" +msgstr "Bestem tilgængelige drivere..." #. If the driver_items list is empty (e.g. because of a too restrictive driver_filter_string), #. show a meaningful text as fallback entry. #: src/Printer.ycp:1171 msgid "No matching driver found. Try 'More Drivers' or 'All Drivers'." -msgstr "" +msgstr "Ingen passende driver fundet. Prøv 'Flere drivere' eller 'Alle drivere'." #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:1190 msgid "Processing many drivers. Please wait..." -msgstr "" +msgstr "Behandler mange drivere. Vent venligst..." #. Message of a Popup::Error. #. Only a simple message because this is only a fallback case #. which should not happen at all: #: src/Printer.ycp:1580 msgid "Failed to determine the driver options." -msgstr "" +msgstr "Bestemmelse af driver-valgmulighederne fejlede." # #. Return at least a list with only a fallback string so that the user is informed: #. Header of a Popup::AnyMessage when "Driver Options" was selected: #: src/Printer.ycp:1583 src/Printer.ycp:1698 src/basicmodify.ycp:545 -#, fuzzy msgid "No driver options available" -msgstr "Ingen information er tilgængelig." +msgstr "Ingen tilgængelige driver-valgmuligheder" #. Dummy info for a currently selected item: #: src/Printer.ycp:1636 msgid "currently selected" -msgstr "" +msgstr "nuværende valgt" # #. Info when a currently selected item is already set: #: src/Printer.ycp:1639 -#, fuzzy msgid "current setting of the print queue" -msgstr "Angiv status for køen" +msgstr "nuværende opsætning af udskriftskøen" #. Enforce user confirmation before a new service is started #. to be on the safe side that the user knows about it: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:97 msgid "Start local running CUPS daemon" -msgstr "" +msgstr "Start lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:99 msgid "A local running CUPS daemon is needed." -msgstr "" +msgstr "En lokalt kørende CUPS-dæmon er nødvendig." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:106 msgid "Failed to start the CUPS daemon" -msgstr "" +msgstr "Start af CUPS-dæmonen fejlede" #. Wait half a minute for a new started cupsd is necessary because #. when a client-only config is switched to a "get Browsing info" config #. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds #. so that the local cupsd should listen at least 31 seconds to get Browsing info #. before e.g. the Overview dialog can be shown with the right current queues. #: src/Printerlib.ycp:118 msgid "" "Started the CUPS daemon.\n" "Waiting half a minute so that it is ready to operate..." msgstr "" +"Startede CUPS-dæmonen.\n" +"Venter et halvt minut, så den er klar til at køre..." #. It can take up to a few minutes when a cupsd is started #. for the very first time (e.g. on a new installed system) #. until the cupsd is actually ready to operate. #. E.g. because parsing of thousands of PPDs may need much time. #. Therefore enforce waiting one minute now. #. (Plain busy message without title.) #: src/Printerlib.ycp:129 msgid "" "The CUPS daemon in not yet accessible.\n" "Waiting one minute so that it is ready to operate..." msgstr "" +"CUPS-dæmonen er endnu ikke tilgængelig.\n" +"Venter et minut, så den er klar til at køre..." #. Popup::Error message: #: src/Printerlib.ycp:136 src/Printerlib.ycp:184 msgid "No local running CUPS daemon is accessible." -msgstr "" +msgstr "Ingen lokalt kørende CUPS-dæmon er tilgængelig." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:142 src/Printerlib.ycp:199 msgid "Failed to enable starting of the CUPS daemon during system boot" -msgstr "" +msgstr "Aktivering af start af CUPS-dæmon under system-boot fejlede" #. Enforce user confirmation before the cupsd is restarted #. to be on the safe side regarding complaints in an enterprise environment #. because a restart disrupts all currently actively printing jobs: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:155 msgid "Restart local running CUPS daemon" -msgstr "" +msgstr "Genstart lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:157 msgid "A restart disrupts all currently actively printing jobs." -msgstr "" +msgstr "En genstart opløser alle nuværende aktive udskriftsopgaver." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:164 msgid "Failed to restart the CUPS daemon" -msgstr "" +msgstr "Genstart af CUPS-dæmonen fejlede" #. Wait half a minute for a restarted cupsd is necessary because #. when a "no Browsing info" config is switched to a "get Browsing info" config #. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds #. so that the local cupsd should listen at least 31 seconds to get Browsing info #. before e.g. the Overview dialog can be shown with the right current queues. #: src/Printerlib.ycp:178 msgid "" "Restarted the CUPS daemon.\n" "Waiting half a minute so that it is ready to operate..." msgstr "" +"Genstartede CUPS-dæmonen.\n" +"Venter et halvt minut, så den er klar til at køre..." #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:192 msgid "Enable starting of the CUPS daemon during system boot" -msgstr "" +msgstr "Aktivér start af CUPS-dæmonen under system-boot" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:194 msgid "Currently the CUPS daemon is not started during system boot." -msgstr "" +msgstr "CUPS-dæmonen startes i øjeblikket ikke under system-boot." #. Enforce user confirmation before the cupsd is stopped #. to be on the safe side regarding complaints in an enterprise environment #. because a stop disrupts all currently actively printing jobs: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:214 msgid "Stop local running CUPS daemon" -msgstr "" +msgstr "Stop lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:216 msgid "A stop disrupts all currently actively printing jobs." -msgstr "" +msgstr "Et stop opløser alle nuværende aktive udskriftopgaver." #. Popup::Error message: #: src/Printerlib.ycp:232 msgid "A local running CUPS daemon is still accessible." -msgstr "" +msgstr "En lokalt kørende CUPS-dæmon er stadig tilgængelig." #. When there is a non-empty client_conf_server_name, #. cups_client_only fails when the client-only server is not accessible: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/Printerlib.ycp:278 -#, fuzzy, ycp-format +#, ycp-format msgid "The CUPS server '%1' is not accessible" -msgstr "Printserveren er tilgængelig." +msgstr "CUPS-serveren '%1' er ikke tilgængelig." # #. Caption for the "Add Printer" dialog (BasicAddDialog): #: src/basicadd.ycp:48 -#, fuzzy msgid "Add New Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Tilføj ny printerkonfiguration" #. Caption for a Table with a list of printer connections: #: src/basicadd.ycp:67 -#, fuzzy msgid "Determine Connection" -msgstr "Tilslutning af USB-printer" +msgstr "Bestem tilslutning" #. Label of a PushButton to show more available printer connections #. in the Table with a list of printer connections: #: src/basicadd.ycp:101 src/basicmodify.ycp:285 -#, fuzzy msgid "&More Connections" -msgstr "Nuværende tilslutning" +msgstr "F&lere tilslutninger" #. Label of a PushButton to go to the "Connection Wizard" #. to specify the printer connection individually: #: src/basicadd.ycp:107 src/basicmodify.ycp:291 -#, fuzzy msgid "Connection &Wizard" -msgstr "Tilslutningsguide" +msgstr "Tilslutnings&guide" #. Caption for a printer driver selection: #: src/basicadd.ycp:120 src/basicadd.ycp:353 src/basicadd.ycp:404 -#, fuzzy msgid "Assign &Driver" -msgstr "Tilføj driver" +msgstr "Tildel &driver" #. Label of a PushButton to search a list for a search string #. and then show the search result: #: src/basicadd.ycp:135 src/basicmodify.ycp:319 msgid "&Show Matching Drivers" -msgstr "" +msgstr "&Vis passende drivere" # #. Printer::DriverItems( driver_filter_string, true ) #. Body of a Popup::AnyMessage when no driver was selected: #: src/basicadd.ycp:149 src/basicadd.ycp:214 src/basicadd.ycp:383 #: src/basicmodify.ycp:742 -#, fuzzy msgid "Select a driver." -msgstr "Vælg en enhed." +msgstr "Vælg en driver." #. Label of a PushButton to go to the "Add Driver" dialog #. to install a new driver (and perhaps download it before): #: src/basicadd.ycp:157 src/basicmodify.ycp:347 -#, fuzzy msgid "&Add Driver" -msgstr "Tilføj driver" +msgstr "&Tilføj driver" #. Header of a TextEntry to enter the queue name: #: src/basicadd.ycp:168 src/basicadd.ycp:371 -#, fuzzy msgid "Set &Name" -msgstr "Servernavn" +msgstr "Angiv &navn" #. Set a different label for the "next" button #. (i.e. the lower right button which results `next as UI::UserInput). #. This button finishes the "add" procedure: #: src/basicadd.ycp:182 -#, fuzzy msgid "&Finish Add" -msgstr "Færdig" +msgstr "&Færdiggør tilføjelse" #. Header of a Popup::AnyMessage when neither a connection #. nor a driver was selected: #. Header of a Popup::AnyMessage when no queue was selected from the list: #: src/basicadd.ycp:195 src/overview.ycp:239 src/overview.ycp:286 #: src/overview.ycp:380 msgid "Nothing Selected" -msgstr "" +msgstr "Intet valgt" #. Body of a Popup::AnyMessage when neither a connection #. nor a driver was selected: #: src/basicadd.ycp:198 msgid "Select a connection and then assign a driver." -msgstr "" +msgstr "Vælg en tilslutning, og tildel så en driver." #. Header of a Popup::AnyMessage when no connection was selected: #: src/basicadd.ycp:204 src/basicadd.ycp:314 src/basicmodify.ycp:602 -#, fuzzy msgid "No Connection Selected" -msgstr "Tilslutning" +msgstr "Ingen tilslutning valgt" # #. Body of a Popup::AnyMessage when no connection was selected: #: src/basicadd.ycp:206 src/basicadd.ycp:316 src/basicmodify.ycp:604 -#, fuzzy msgid "Select a connection." -msgstr "Vælg en enhed." +msgstr "Vælg en tilslutning." # #. Header of a Popup::AnyMessage when no driver was selected: #: src/basicadd.ycp:212 src/basicadd.ycp:381 src/basicmodify.ycp:740 -#, fuzzy msgid "No Driver Selected" -msgstr "Ingen server angivet" +msgstr "Ingen driver valgt" # #. Header of a Popup::AnyMessage when no queue name was entered: #: src/basicadd.ycp:221 -#, fuzzy msgid "No Queue Name" -msgstr "Kønavn" +msgstr "Ingen navn på kø" #. Body of a Popup::AnyMessage when no queue name was entered: #: src/basicadd.ycp:223 -#, fuzzy msgid "Enter a queue name." -msgstr "Angiv et gyldigt servernavn." +msgstr "Angiv et navn på køen." # #. Header of a Popup::AnyMessage when a wrong queue name was entered: #: src/basicadd.ycp:229 -#, fuzzy msgid "Invalid Queue Name" -msgstr "Kønavn" +msgstr "Ugyldigt navn på kø" #. Body of a Popup::AnyMessage when a wrong queue name was entered: #: src/basicadd.ycp:231 msgid "Only letters [A-Za-z], numbers [0-9], and '_' are allowed for the queue name." -msgstr "" +msgstr "Kun bogstaver [A-Z a-z], tal [0-9] og '_' tillades i navnet på køen." # #. Header of a Popup::ContinueCancelHeadline #. when a queue name is changed to be valid: #: src/basicadd.ycp:239 -#, fuzzy msgid "Confirm Validated Queue Name" -msgstr "Konfigurerede køer" +msgstr "Bekræft valideret navn på kø" #. Body of a Popup::ContinueCancelHeadline #. when a queue name was automatically changed to be valid #. where %1 will be replaced by the old invalid queue name #. and %2 will be replaced by a new valid queue name #: src/basicadd.ycp:244 #, ycp-format msgid "'%1' is invalid or it exists already. Use '%2' instead?" -msgstr "" +msgstr "'%1' er ugyldigt eller eksisterer allerede. Vil du bruge '%2' i stedet?" #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because before the function Printer::AddQueue #. was called and this function would have shown more specific messages. #: src/basicadd.ycp:260 #, ycp-format msgid "Failed to add queue %1." -msgstr "" +msgstr "Tilføjelse af køen %1 fejlede." #. Header of a Popup::AnyMessage when "Add Driver" was selected: #: src/basicadd.ycp:278 src/basicmodify.ycp:533 msgid "Not yet implemented" -msgstr "" +msgstr "Endnu ikke implementeret" #. Body of a Popup::AnyMessage when the "Add Driver" was selected: #: src/basicadd.ycp:280 src/basicmodify.ycp:535 msgid "The 'Add Driver' dialog is not yet implemented." -msgstr "" +msgstr "Dialogen 'Tilføj driver' er endnu ikke implementeret." # #: src/basicadd.ycp:399 src/basicmodify.ycp:789 -#, fuzzy msgid "any model" -msgstr "Skift model" +msgstr "enhver model" #. After the "Modify" text the actual queue name is appended #. so that the result is e.g. "Modify funprinter1". #. The actual queue name is a system value which cannot be translated. #: src/basicmodify.ycp:68 -#, fuzzy msgid "Modify" -msgstr "Færdig" +msgstr "Ændr" # #. Label of a PushButton to go to a dialog #. to set all available options for the printer driver #. which is currently used for a print queue: #: src/basicmodify.ycp:109 -#, fuzzy msgid "All &Options for the Current Driver" -msgstr "Udskift det aktuelle udskriftssystem" +msgstr "Alle valgmuligheder f&or denne driver" # #: src/basicmodify.ycp:178 -#, fuzzy msgid "Default Paper Size of the Current Driver" -msgstr "Standardpapir i din printer" +msgstr "Standardpapirstørrelse for denne driver" #: src/basicmodify.ycp:222 -#, fuzzy msgid "Current Connection" msgstr "Nuværende tilslutning" #. Do not change or translate "raw", it is a technical term when no driver is used. #. Do not change or translate "System V style interface script", it is a technical term. #: src/basicmodify.ycp:238 msgid "No driver is used (it is a 'raw' queue or a 'System V style interface script' is used)" -msgstr "" +msgstr "Ingen driver anvendes (det er en 'rå' kø, eller 'System V style interface script' benyttes)" #: src/basicmodify.ycp:243 -#, fuzzy msgid "Current Driver" -msgstr "Flere driver-valgmuligheder" +msgstr "Nuværende driver" #. Caption for a printer driver selection: #: src/basicmodify.ycp:304 src/basicmodify.ycp:676 src/basicmodify.ycp:794 -#, fuzzy msgid "Driver" -msgstr "Tilføj driver" +msgstr "Driver" #. Label of a TextEntry for a short printer driver description (only one line): #: src/basicmodify.ycp:358 -#, fuzzy msgid "Descri&ption" -msgstr "Beskrivelse" +msgstr "&Beskrivelse" #. Label of a TextEntry for printer location string: #: src/basicmodify.ycp:366 -#, fuzzy msgid "&Location" -msgstr "Placering" +msgstr "P&lacering" #. CheckBox to set a local print queue to be the default queue: #: src/basicmodify.ycp:375 -#, fuzzy msgid "&Default Printer" -msgstr "&Serielprinter" +msgstr "Stan&dardprinter" #. CheckBox to set a local print queue to accept print jobs: #: src/basicmodify.ycp:382 -#, fuzzy msgid "Accept Print &Jobs" -msgstr "Acceptér udskriftsopgaver" +msgstr "Acceptér udskrifts&opgaver" #. CheckBox to enable printing for a local print queue: #: src/basicmodify.ycp:389 -#, fuzzy msgid "&Enable Printing" -msgstr "Aktivér udskrift" +msgstr "&Aktivér udskrift" #. Set a different label for the "next" button #. (i.e. the lower right button which results `next as UI::UserInput). #. This button finishes the "add" procedure: #: src/basicmodify.ycp:403 -#, fuzzy msgid "&Finish Modify" -msgstr "Færdig" +msgstr "&Færdiggør ændring" # #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/basicmodify.ycp:508 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to modify %1." -msgstr "Sæt standardkø" +msgstr "Ændring af %1 fejlede." # #. Message of a Popup::ShowFeedback when nothing was changed: #: src/basicmodify.ycp:519 src/printingvianetwork.ycp:811 src/sharing.ycp:957 -#, fuzzy msgid "Nothing changed." -msgstr "Ikke delt" +msgstr "Intet ændret." #. Body of a Popup::AnyMessage when "Driver Options" was selected: #: src/basicmodify.ycp:547 msgid "Possible reasons: Nothing selected or it is a remote configuration." -msgstr "" +msgstr "Mulige årsager: Intet valgt, eller det er en ekstern konfiguration." #. TRANSLATORS: Button to test remote printer machine #: src/connectionwizard.ycp:44 src/connectionwizard.ycp:72 #: src/connectionwizard.ycp:134 src/connectionwizard.ycp:157 #: src/connectionwizard.ycp:174 -#, fuzzy msgid "&Test Connection" -msgstr "Nuværende tilslutning" +msgstr "&Test tilslutning" #. TRANSLATORS: Button to add not detected printer queue #: src/connectionwizard.ycp:46 -#, fuzzy msgid "Other" -msgstr "&Andet..." +msgstr "Andre" #. TRANSLATORS: Text entry to fill IP or hostname of remote server #. TRANSLATORS: Text entry for IP or hostname of remote server #: src/connectionwizard.ycp:60 src/connectionwizard.ycp:145 #: src/connectionwizard.ycp:163 -#, fuzzy msgid "IP Address or Host Name" -msgstr "IP-adresse" +msgstr "IP-adresse eller værtsnavn" #. TRANSLATORS: Label for menu to search for remote servers #: src/connectionwizard.ycp:62 src/connectionwizard.ycp:147 -#, fuzzy msgid "Look Up" -msgstr "&Søg efter" +msgstr "Søg efter" # #. TRANSLATORS: Buttonto search for remote servers #: src/connectionwizard.ycp:66 src/connectionwizard.ycp:151 -#, fuzzy msgid "Look Up for All Hosts" -msgstr "Søg efter &alle værtsmaskiner" +msgstr "Søg efter alle værtsmaskiner" #. TRANSLATORS: List of input field labels, first for network scan button #: src/connectionwizard.ycp:105 -#, fuzzy msgid "Scan for Direct Socket Servers" -msgstr "Søg efter &Direct Socket-servere" +msgstr "Søg efter Direct Socket-servere" #: src/connectionwizard.ycp:105 -#, fuzzy msgid "TCP Port Number" -msgstr "&TCP-portnummer" +msgstr "TCP-portnummer" # #. TRANSLATORS: List of input field labels, first for network scan button, second for name of printer queue #: src/connectionwizard.ycp:109 src/connectionwizard.ycp:139 -#, fuzzy msgid "Scan for LPD Servers" -msgstr "Søg efter &LPD-servere" +msgstr "Søg efter LPD-servere" #: src/connectionwizard.ycp:109 msgid "Queue Name (see the printer's manual)" -msgstr "" +msgstr "Navn på kø (se printerens manual)" #. TRANSLATORS: Input field label #: src/connectionwizard.ycp:114 msgid "URI (see the printer's manual)" -msgstr "" +msgstr "URI (se printerens manual)" #. TRANSLATORS: Text entry for remote server name #: src/connectionwizard.ycp:121 msgid "Server (NetBIOS Host Name)" -msgstr "" +msgstr "Server (NetBIOS-værtsnavn)" # #. TRANSLATORS: Text entry for printer name #: src/connectionwizard.ycp:123 -#, fuzzy msgid "Printer (Share Name)" -msgstr "Printermodel" +msgstr "Printer (navn på deling)" #. TRANSLATORS: Text entry for samba domain #: src/connectionwizard.ycp:125 msgid "Workgroup (Domain Name)" -msgstr "" +msgstr "Arbejdsgruppe (domænenavn)" #. TRANSLATORS: Frame label for authentication #: src/connectionwizard.ycp:127 src/connectionwizard.ycp:167 msgid "Authenticate As" -msgstr "" +msgstr "Godkend som" #. TRANSLATORS: Text entry for username (authentication) #: src/connectionwizard.ycp:129 src/connectionwizard.ycp:169 -#, fuzzy msgid "User" -msgstr "Brugere" +msgstr "Bruger" #. TRANSLATORS: Text entry for password (authentication) #: src/connectionwizard.ycp:131 src/connectionwizard.ycp:171 msgid "&Password" -msgstr "" +msgstr "&Adgangskode" #. TRANSLATORS: Text entry for name of remote printer queue #: src/connectionwizard.ycp:139 src/connectionwizard.ycp:155 #: src/connectionwizard.ycp:165 -#, fuzzy msgid "Queue Name" -msgstr "Kønavn" +msgstr "Navn på kø" # #: src/connectionwizard.ycp:149 -#, fuzzy msgid "Scan for IPP Servers" -msgstr "Søg efter &IPP-servere" +msgstr "Søg efter IPP-servere" #: src/connectionwizard.ycp:150 -#, fuzzy msgid "Scan for IPP Broadcasts" -msgstr "Lyt efter IPP-&broadcast" +msgstr "Søg efter IPP-broadcasts" #. TRANSLATORS: Text entry for URI (Uniform Resource Identifier) #: src/connectionwizard.ycp:181 msgid "URI (Uniform Resource Identifier)" -msgstr "" +msgstr "URI (Uniform Resource Identifier)" # #. TRANSLATORS: Text entry for program name that will be called via pipe #: src/connectionwizard.ycp:187 -#, fuzzy msgid "Program Name" -msgstr "&Programnavn" +msgstr "Programnavn" #. TRANSLATORS: Text entry for device URI (Uniform Resource Identifier) #: src/connectionwizard.ycp:193 msgid "Device URI (for which 'beh' should be applied)" -msgstr "" +msgstr "Enheds-URI (for hvilket 'beh' bør anvendes)" #. TRANSLATORS: Check box #: src/connectionwizard.ycp:195 -#, fuzzy msgid "Never Disable the Queue" -msgstr "Brug serverens standardkø" +msgstr "Deaktivér aldrig køen" #. TRANSLATORS: Text entry #: src/connectionwizard.ycp:197 msgid "Number of Retries ('0' means infinite retries)" -msgstr "" +msgstr "Antal genforsøg ('0' betyder uendelige genforsøg)" #. TRANSLATORS: Text entry #: src/connectionwizard.ycp:199 msgid "Delay in Seconds Between Two Retries" -msgstr "" +msgstr "Forsinkelse i sekunder mellem to genforsøg" #. TRANSLATORS: Label for tree widget description #: src/connectionwizard.ycp:221 -#, fuzzy msgid "&Connection Type" -msgstr "Tilslutning" +msgstr "&Tilslutningstype" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:224 -#, fuzzy msgid "Directly Connected Device" -msgstr "Direkte forbundne printere" +msgstr "Direkte tilsluttet enhed" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:227 -#, fuzzy msgid "Parallel Port" -msgstr "&Parallelprinter" +msgstr "Parallelport" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:229 -#, fuzzy msgid "USB Port" -msgstr "&USB-printer" +msgstr "USB-port" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:231 -#, fuzzy msgid "Serial Port" -msgstr "Indstillinger for &serielporte" +msgstr "Seriel port" #. `item(`id(`infra), _("Infrared Port (IrDA)")), #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:234 -#, fuzzy msgid "Bluetooth" -msgstr "Blue&tooth-printer" +msgstr "Bluetooth" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:236 msgid "SCSI" -msgstr "" +msgstr "SCSI" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:238 msgid "HP Devices (HPLIP)" -msgstr "" +msgstr "HP-enheder (HPLIP)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:241 msgid "Access Network Printer or Printserver Box via" -msgstr "" +msgstr "Tilgå netværksprinter eller udskriftsserverboks via" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:244 msgid "TCP Port (AppSocket/JetDirect)" -msgstr "" +msgstr "TCP-port (AppSocket/JetDirect)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:246 msgid "Line Printer Daemon (LPD) Protocol" -msgstr "" +msgstr "Linjeprinterdæmon- (LPD-) protokol" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:248 msgid "Internet Printing Protocol (IPP)" -msgstr "" +msgstr "Internetudskriftsprotokol (IPP)" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:251 -#, fuzzy msgid "Print Via Print Server Machine" -msgstr "Udskriv via &IPX-netværksserver" +msgstr "Udskrift via udskriftservermaskine" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:254 msgid "Microsoft Windows/SAMBA (SMB/CIFS)" -msgstr "" +msgstr "Microsoft Windows/SAMBA (SMB/CIFS)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:256 msgid "Traditional UNIX Server (LPR)" -msgstr "" +msgstr "Traditionel UNIX-server (LPR)" # #. `item(`id(`iprint), _("iPrint (Novell OES)")), #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:259 -#, fuzzy msgid "CUPS Server" -msgstr "CUPS serverindstillinger" +msgstr "CUPS-server" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:261 msgid "Novell Netware Print Server (IPX)" -msgstr "" +msgstr "Novell Netware Print Server (IPX)" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:264 -#, fuzzy msgid "Special" -msgstr "Indstillinger for serielporte" +msgstr "Speciel" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:267 msgid "Specify Arbitrary Device URI" -msgstr "" +msgstr "Angiv tilfældig enheds-URI" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:269 msgid "Send Print Data to Other Program (pipe)" -msgstr "" +msgstr "Send udskriftsdata til andet program (pipe)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:271 msgid "Daisy-chain Backend Error Handler (beh)" -msgstr "" +msgstr "Fejlhåndtering for Daisy-chain-backend (beh)" # #. TRANSLATORS: Connection details widget #: src/connectionwizard.ycp:278 -#, fuzzy msgid "Connection Settings" -msgstr "Begrænsningsindstillinger" +msgstr "Tilslutningsindstillinger" #. TRANSLATORS: Connection wizard header #: src/connectionwizard.ycp:285 -#, fuzzy msgid "Connection Wizard" msgstr "Tilslutningsguide" # #: src/dialogs.ycp:52 -#, fuzzy msgid "Driver Options for Queue" -msgstr "Driver-valgmuligheder" +msgstr "Driver-valgmuligheder for kø" #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/dialogs.ycp:115 #, ycp-format msgid "Failed to set driver options for queue %1." -msgstr "" +msgstr "Opsætning af driver-valgmuligheder for køen %1 fejlede." #: src/dialogs.ycp:166 msgid "Specify in which way USB printers are configured automatically" -msgstr "" +msgstr "Angiver på hvilken måde USB-printere konfigureres automatisk." # #: src/dialogs.ycp:167 -#, fuzzy msgid "Enable &Automatic Configuration of New Printers" -msgstr "Konfigurationsoversigt for printere" +msgstr "Aktivér &automatisk konfiguration af nye printere" #: src/dialogs.ycp:168 msgid "&Disable Printout when Disconnecting USB Printer" -msgstr "" +msgstr "&Deaktivér udskrift når USB-printer frakobles" #: src/dialogs.ycp:169 msgid "The name of the CUPS &policy to assign to newly configured printers" -msgstr "" +msgstr "Navnet på CUPS-&politikken der tildeles nyligt konfigurerede printere" #: src/dialogs.ycp:211 -#, fuzzy msgid "Specify the operation policy" -msgstr "Handlingspolitik" +msgstr "Angiv handlingspolitikken" #: src/dialogs.ycp:212 -#, fuzzy msgid "The operation &policy" -msgstr "Handlingspolitik" +msgstr "Handlings&politikken" # #: src/dialogs.ycp:296 src/dialogs.ycp:297 -#, fuzzy msgid "Printer Configurations" -msgstr "Gemmer printerkonfiguration" +msgstr "Printer-konfigurationer" # #: src/dialogs.ycp:304 src/dialogs.ycp:305 -#, fuzzy msgid "Print via Network" -msgstr "Udskriv via &SMB-netværksserver" +msgstr "Udskrift via netværk" #: src/dialogs.ycp:312 src/dialogs.ycp:313 -#, fuzzy msgid "Share Printers" -msgstr "Del printer" +msgstr "Del printere" # #: src/dialogs.ycp:328 src/dialogs.ycp:329 -#, fuzzy msgid "Autoconfig Settings" -msgstr "Søgeindstillinger" +msgstr "Konfigurér indstillinger automatisk" #. Read dialog help 1/1: #: src/helps.ycp:42 msgid "" "\n" "<big>Initializing printer Configuration</big> \n" "Please wait... \n" "" msgstr "" +"\n" +"<big>Initialiserer konfiguration af printer</big> \n" +"Vent venligst... \n" +"" #. Write dialog help 1/1: #: src/helps.ycp:49 msgid "" "\n" "<big>Finishing printer Configuration</big> \n" "Please wait... \n" "" msgstr "" +"\n" +"<big>Færdiggør konfiguration af printer</big> \n" +"Vent venligst... \n" +"" #. Overview dialog help 1/7: #: src/helps.ycp:56 msgid "" "\n" "<big>Print Queue Overview</big> \n" "A printer device is not used directly but via a print queue. \n" "When various application programs submit print jobs simultaneously,\n" "the jobs queue up and are sent one after the other to the printer device. \n" "It is possible to have several different print queues for the same printer device.\n" "For example a second queue with a monochrome-only driver for a color device\n" "or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer.\n" "" msgstr "" +"\n" +"<big>Oversigt over udskriftskøer</big> \n" +"En udskriftsenhed bruges ikke direkte, men via en udskriftskø. \n" +"Når forskellige programmer tildeler udskriftsopgaver samtidigt,\n" +"sættes opgaverne i en kø og sendes en af gangen til udskriftsenheden. \n" +"Det er muligt, at have flere forskellige udskriftskøer til samme udskriftsenhed.\n" +"For eksempel en anden kø med kun-monokrom driver til en farveenhed eller en\n" +"PostScript-kø og en kø med en PCL-driver til en PostScript+PCL-printer.\n" +"" #. Overview dialog help 2/7: #: src/helps.ycp:66 msgid "" "\n" "<big>Using Remote Queues:</big> \n" "Remote queues exist on other hosts in the network\n" "and therefore they cannot be changed on this host. \n" "The remote queues which are listed here are known on this host\n" "and usually they can be used directly by application programs\n" "so that there is no need to set up a local queue for a printer\n" "which is already available via a remote queue. \n" "" msgstr "" +"\n" +"<big>Anvendelse af eksterne køer:</big> \n" +"Eksterne køer findes på andre værter i netværket,\n" +"og derfor kan de ikke ændres på denne vært. \n" +"De eksterne køer, der vises her, kendes på denne vært,\n" +"og kan normalt bruges direkte af de anvendte programmer,\n" +"så det er ikke nødvendigt at sætte en lokal kø op for en\n" +"printer, der allerede er tilgængelig via en ekstern kø. \n" +"" #. Overview dialog help 3/7: #: src/helps.ycp:76 -#, fuzzy msgid "" "\n" "<big>Configure a printer:</big> \n" "Press Add to set up a new queue for a printer device.\n" "" msgstr "" -"<big>Del printer</big> \n" -"Disse valgmuligheder giver mulighed for at dele printere via netværket.\n" +"\n" +"<big>Konfigurér en printer:</big> \n" +"Tryk på Tilføj for at sætte en ny kø op for en udskriftsenhed.\n" "" #. Overview dialog help 4/7: #: src/helps.ycp:81 -#, fuzzy msgid "" "\n" "<big>Change the settings for a queue:</big> \n" "Select a local queue and press Configure.\n" "" msgstr "" -"<big>Vælge model</big> \n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"Vælg model.\n" +"\n" +"<big>Ændre indstillinger for en kø:</big> \n" +"Vælg en lokal kø og tryk på Konfigurér.\n" +"" #. Overview dialog help 5/7: #: src/helps.ycp:86 -#, fuzzy msgid "" "\n" "<big>Remove a queue:</big> \n" "Select a local queue and press Delete.\n" "" msgstr "" -"<big>Vælge model</big> \n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"Vælg model.\n" +"\n" +"<big>Fjerne en kø:</big> \n" +"Vælg en lokal kø og tryk på Slet.\n" +"" #. Overview dialog help 6/7: #: src/helps.ycp:91 -#, fuzzy msgid "" "\n" "<big>Print a test page:</big> \n" "Select the queue and press Print Test Page.\n" "" msgstr "" -"<big>Vælge model</big> \n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"Vælg model.\n" +"\n" +"<big>Udskrive en testside:</big> \n" +"Vælg køen og tryk på Udskriv testside.\n" +"" #. Overview dialog help 7/7: #: src/helps.ycp:96 msgid "" "\n" "<big>Refresh the list of queues:</big> \n" "In particular after changes regarding printing via network\n" "the available remote queues may have changed.\n" "Usually it takes some time (up to several minutes)\n" "until such changes become known to the local host\n" "so that it is useful to press Refresh List\n" "after some time to get an up-to-date list\n" "of available remote queues.\n" "" msgstr "" +"\n" +"<big>Genopfriske listen over køer:</big> \n" +"Særligt efter ændringer vedr. udskrift over netværk\n" +"kan de tilgængelige eksterne køer være ændrede.\n" +"Normalt tager det noget tid (op til flere minutter),\n" +"før sådanne ændringer kendes af den lokale vært.\n" +"Det er således nyttigt at trykke på Genopfrisk liste\n" +"efter et stykke tid for at få en ajourført liste over\n" +"tilgængelige eksterne køer.\n" +"" #. BasicAddDialog help 1/5: #: src/helps.ycp:109 msgid "" "\n" "<big>Set Up a New Queue for a Printer Device</big> \n" "A printer device is not used directly but via a print queue. \n" "When various application programs submit print jobs simultaneously,\n" "the jobs queue up and are sent one after the other to the printer device. \n" "It is possible to have several different print queues for the same printer device.\n" "Usually several print queues are needed when several different printer drivers\n" "should be used for the same printer device.\n" "For example a second queue with a monochrome-only driver\n" "to enforce black-only printout on a color device\n" "or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer\n" "because printing via the PCL driver is usally faster (but with less quality).\n" "" msgstr "" +"\n" +"<big>Sæt en ny kø op til en printer-enhed</big> \n" +"En printer bruges ikke direkte, men via en udskriftskø. \n" +"Når flere programmer tildeler udskriftsopgaver samtidigt, sættes\n" +"opgaverne i kø og sendes en ad gangen til printeren. \n" +"Det er muligt, at have flere forskellige udskriftskøer til den samme printer.\n" +"Flere udskriftskøer er normalt nødvendige, når der skal benyttes flere\n" +"printer-drivere til den samme printer-enhed.\n" +"Det kan f.eks. være en udelukkende monokrom driver for at gennemtvinge\n" +"sort/hvide udskrifter på en farveprinter, eller en PostScript-kø og en\n" +"PCL-driver til en PostScript+PCL-printer, da udskrift via PCL-\n" +"driveren normalt er hurtigere (men med dårligere kvalitet).\n" +"" #. BasicAddDialog help 2/5: #: src/helps.ycp:123 msgid "" "\n" "To set up a new queue: \n" "Select the connection of the matching printer device, \n" "find and assign a suitable printer driver, and \n" "set a unique queue name.\n" "" msgstr "" +"\n" +"At sætte en ny kø op: \n" +"Vælg den matchende printers tilslutning, \n" +"find og tildel en passende printer-driver, og \n" +"angiv et unikt navn på køen.\n" +"" #. BasicAddDialog help 3/5: #. BasicModifyDialog help 2/4: #: src/helps.ycp:130 src/helps.ycp:165 msgid "" "\n" "The connection determines which way data is sent to the printer device. \n" "If a wrong connection is selected, no data can be sent to the device\n" "so that there cannot be any printout. \n" "If a printer device is accessible via more than one connection type,\n" "it is shown for each connection type. \n" "In particular HP devices are often accessible both via the 'usb:/...'\n" "and the 'hp:/...' connection.\n" "The latter is provided by the HP driver package 'hplip'.\n" "For plain printing both kind of connections should work but for anything else\n" "(e.g. device status via 'hp-toolbox', or scanning with a HP all-in-one device)\n" "the 'hp:/...' connection must be used.\n" "" msgstr "" +"\n" +"Tilslutningen bestemmer, hvilken vej data sendes til printer-enheden. \n" +"Hvis en forkert tilslutning vælges, kan ingen data sendes til enheden,\n" +"og der kan således ikke udskrives. \n" +"Hvis en printer-enhed kan tilgås via mere end én tilslutningstype,\n" +"vises den for hver tilslutningstype. \n" +"Særligt HP-enheder kan ofte tilgås via både 'usb:/...'- og 'hp:/...'-\n" +"tilslutningen.\n" +"Den sidste tilbydes af HP driver-pakken 'hplip'.\n" +"Begge slags tilslutninger skulle virke til almindelig udskrift, men til alt\n" +"muligt andet (f.eks. enhedsstatus via 'hp-toolbox', eller scanning med en HP\n" +"all-in-one-enhed skal 'hp:/...'-tilslutningen benyttes.\n" +"" #. BasicAddDialog help 4/5: #: src/helps.ycp:144 msgid "" "\n" "The driver determines that the right data is produced for the\n" "specific printer model. \n" "If a wrong driver is assigned, wrong data is sent to the printer\n" "which results bad looking printout, chaotic printout, or no printout at all.\n" "" msgstr "" +"\n" +"Driveren bestemmer, at den rigtige data produceres til den\n" +"angivne printer-model. \n" +"Hvis en forkert driver tildeles, sendes forkert data til printeren, hvilket\n" +"resulterer i dårligt udseende, kaotisk eller slet ingen udskrift.\n" +"" #. BasicAddDialog help 5/5: #: src/helps.ycp:151 msgid "" "\n" "Application programs do not show the actual printer device\n" "but its associated queue name. \n" "Only letters [A-Za-z], numbers [0-9], and the underscore '_'\n" "are allowed for the queue name and it must start with a letter.\n" "" msgstr "" +"\n" +"Applikationsprogrammer viser ikke den faktiske printer-enhed\n" +"men dens associerede navn på køen. \n" +"Kun bogstaver [A-Z a-z], tal [0-9] og bundstreg '_'\n" +"er tilladt i navne på køer, og det skal starte med et bogstav.\n" +"" #. BasicModifyDialog help 1/4: #: src/helps.ycp:160 msgid "" "\n" "<big>Modify a Print Queue</big> \n" "To modify a queue, select only what you really want to be changed. \n" "" msgstr "" +"\n" +"<big>Ændre en udskriftskø</big> \n" +"Vælg kun det, du virkelig vil have ændret, for at ændre en kø. \n" +"" #. BasicModifyDialog help 3/4: #: src/helps.ycp:179 msgid "" "\n" "The driver determines that the right data is produced for the\n" "specific printer model. \n" "If a wrong driver is assigned, wrong data is sent to the printer\n" "which results bad looking printout, chaotic printout, or no printout at all. \n" "You can either select another driver and modify its driver option settings later\n" "or keep the currently used driver and modify its driver option settings now. \n" "Some driver option settings must match to your particular printer.\n" "For example the default paper size setting of the driver\n" "must match to the paper which is actually loaded in your printer. \n" "For other driver option settings you can choose what you like.\n" "For example any choice of the available printing resolutions\n" "should work for the particular driver.\n" "Nevertheless it may happen that your particular printer fails to print\n" "with high resolution. For example when you have a laser printer\n" "which has insufficient built-in memory to process high resolution pages.\n" "" msgstr "" +"\n" +"Driveren sørger for, at de rette data produceres til den\n" +"angivne printer-model. \n" +"Hvis en forkert driver tildeles, sendes forkerte data til printeren, hvilket\n" +"resulterer i dårligt udseende, kaotisk eller slet ingen udskrift. \n" +"Du kan enten vælge en anden driver, og senere ændre opsætningen af\n" +"driver-valgmulighederne, eller beholde den nuværende driver og ændre\n" +"dens opsætning af driver-valgmulighederne nu. \n" +"Nogle indstillinger i driver-valgmulighederne skal passe til den enkelte printer.\n" +"Opsætning af driverens standard-papirstørrelse skal f.eks. matche det papir,\n" +"der faktisk er lagt i printeren. \n" +"Til andre indstillinger af driver valgmuligheder kan du vælge, hvad du har\n" +"lyst til. For eksempel skulle ethvert valg af udskriftsopløninger fungere\n" +"for den enkelte .\n" +"Dog kan det hænde, at din egen printer fejler i udskrift med høj opløsning,\n" +"hvis du f.eks. har en laser-printer, der ikke har den fornødne indbyggede\n" +"hukommelse til at bearbejde sider med høj opløsning.\n" +"" #. BasicModifyDialog help 4/4: #: src/helps.ycp:197 msgid "" "\n" "In contrast to connection and driver where you must select the right one,\n" "you are free to enter arbitrary strings for description and location.\n" "Application programs often show description and location in the print dialog.\n" "To make sure that those strings look correct in any language\n" "which a particular user of a particular application program may use,\n" "it is safe when you use only plain text without special characters\n" "(e.g. only letters [A-Za-z], numbers [0-9], and spaces).\n" "Usually the description describes the model and optionally the driver\n" "(e.g. 'ACME FunPrinter 1000 using generic PCL driver')\n" "and the location describes where the printer is located\n" "(e.g. 'Room 123' or 'Front Desk').\n" "" msgstr "" +"\n" +"Modsat tilslutning og driver, hvor du skal vælge den rigtige, kan du frit\n" +"angive vilkårlige strenge for beskrivelse og placering.\n" +"Applikationsprogrammerne viser ofte beskrivelse og placering i\n" +"udskriftdialogen.\n" +"Det er bedst kun at benytte ren tekst og uden specielle tegn (f.eks kun\n" +"bogstaver [A-Z a-z] og tal [0-9] og mellemrum) for at sikre, at disse\n" +"strenge ser rigtige ud på ethvert sprog, som en applikationsbruger\n" +"måte anvende.\n" +"Normalt beskriver beskrivelsen modellen og evt. driveren (som f.eks.\n" +"'ACME FunPrinter 1000 med generic PCL-driver'), ligesom placering\n" +"beskriver, hvor printeren er placeret (f.eks. 'Rum 123' eller 'Reception').\n" +"" #. DriverOptionsDialog help 1/3: #: src/helps.ycp:213 msgid "" "\n" "<big>Set Driver Options</big> \n" "Usually it is best to leave the driver defaults because\n" "the defaults should be reasonable for usual printing. \n" "Additionally the print dialogs in usual application programs\n" "show the driver options too so that each user can specify\n" "driver options for each individual printout. \n" "The only setting which should be checked in any case is the paper size\n" "which must be set to what is actually used by default in the printer.\n" "" msgstr "" +"\n" +"<big>Indstil valgmuligheder for driver</big> \n" +"Normalt er det bedst blot at benytte standardindstillingerne for\n" +"driveren, da disse burde være udmærkede til alm. udskrift. \n" +"Yderligere viser udskriftdialogen i almindelige applikations-\n" +"programmer valgmulighederne for driveren, så hver bruger kan\n " +"angive disse for hvert enkelt udskrift. \n" +"Den eneste indstilling, der skal tjekkes i hvert enkelt tilfælde, er\n" +"papirstørrelsen, der skal sættes til den, der faktisk benyttes som\n" +"standard i printeren.\n" +"" #. DriverOptionsDialog help 2/3: #: src/helps.ycp:224 msgid "" "\n" "Non-default settings may not work in any case or have unexpected consequences. \n" "For example a high resolution setting may not work for a laser printer\n" "when its default built-in memory is insufficient to process high resolution pages. \n" "Or a high quality setting may print intolerable slow on an inkjet printer.\n" "" msgstr "" +"\n" +"Ikke-standardindstillinger virker måske slet ikke eller har uventede konsekvenser. \n" +"For eksempel virker en for højt sat opløsning måske ikke for en laser-printer, hvis den\n" +"standard indbyggede hukommelse er utilstrækkelig til at behandle sider med høj opløsning. \n" +"Eller en højkvalitets indstilling gør udskrift utåleligt langsom på en inkjet-printer\n" +"" #. DriverOptionsDialog help 3/3: #: src/helps.ycp:231 msgid "" "\n" "On the other hand in certain cases printer-specific driver settings\n" "must be adjusted to get the full functionality of a printer. \n" "In particular when the printer has optional units installed like\n" "duplex unit or optional paper feeders, the matching driver settings\n" "should be checked and adjusted. \n" "For example a duplex unit option must be set to 'installed' or 'true'\n" "otherwise the driver may ignore duplex printing option settings.\n" "" msgstr "" +"\n" +"På den anden side set skal specifikke driver-indstillinger justeres\n" +"for at opnå den fulde funktionalitet af en printer. \n" +"Specielt, hvis printeren har valgfrie elementer installeret som\n" +"'duplex unit' eller valgfrie papirfødere, skal de passende driver-\n" +"indstillinger markeres og justeres. \n" +"For eksempel skal duplex-elementet sættes til 'installed' eller 'true',\n" +"ellers kan printeren evt. ignorere opsætningen af duplex-udskrift.\n" +"" #. ConnectionWizardDialog help 1/6: #: src/helps.ycp:243 msgid "" "\n" "<big>Specify the Connection</big> \n" "The connection determines which way data is sent to the printer device. \n" "If a wrong connection is used, no data can be sent to the device\n" "so that there cannot be any printout.\n" "" msgstr "" +"\n" +"<big>Angiv tilslutningen</big> \n" +"Tilslutningen bestemmer, hvilken vej data sendes til printer-enheden. \n" +"Hvis en forkert tilslutning anvendes, kan ingen data sendes til enheden,\n" +"således bliver der heller ikke nogen udskrift.\n" +"" #. ConnectionWizardDialog help 2/6: #: src/helps.ycp:250 #, ycp-format msgid "" "\n" "<big>Printer Device URI</big> \n" "A connection is specified as so called device URI. \n" "Its first word (the so called URI scheme) specifies the kind of data-transfer,\n" "for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'. \n" "After the scheme there are more or less additional parts\n" "(separated by slash '/' characters) which specify the details\n" "for this kind of data-transfer. \n" "Finally there could be optional parameters (separated by a question mark '?')\n" "of the form option1=value1&option2=value2&option3=value3 so that\n" "a full device URI could be for example: \n" "ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false \n" "Special characters must be percent-encoded (also known as URL encoding).\n" "For example a space character ' ' must be written as '%20'\n" "and a plus sign '+' must be written as '%2B'. \n" "Some examples: \n" "A USB printer model 'Fun Printer 1000+' made by 'ACME'\n" "with serial number 'A1B2C3' may have a device URI like: \n" "usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3 \n" "A network printer with IP 192.168.100.1 which is accessible\n" "via port 9100 may have a device URI like: \n" "socket://192.168.101.202:9100 \n" "A network printer with IP 192.168.100.2 which is accessible\n" "via LPD protocol with a remote LPD queue name 'lpt1'\n" "may have a device URI like: \n" "lpd://192.168.100.2/lpt1\n" "" msgstr "" +"\n" +"<big>Printer-enhedens URI</big> \n" +"En tilslutning angives som et såkaldt enheds-URI. \n" +"Dets første ord (det såkaldte URI-skema) angiver typen af dataoverførsel,\n" +"for eksempel 'parallel', 'usb', 'socket', 'lpd' eller 'ipp'. \n" +"Efter skemaet er der flere eller færre yderligere dele (adskilt med\n" +"skråstreger '/'), som angiver detaljerne for denne type dataoverførsel. \n" +"Til sidst kan der være valgfrie parametre (adskilt med et spørgsmålstegn '?')\n" +"i form af valgmulighed1=værdi1&valgmulighed2=værdi2&valgmulighed3=\n" +"værdi3 således at en fuld enheds-URI f.eks. kan være: \n" +"ipp://server.domæne:631/printere/kønavn?waitjob=false&waitprinter=false \n" +"Specielle tegn skal være procent-kodet (også kendt som URL-kodning).\n" +"Et mellemrum ' 'skal f.eks. skrives som '%20',\n" +"og et plus-tegn '+' skal skrives som '%2B'. \n" +"Nogle eksempler: \n" +"En USB-printer model 'Fun Printer 1000+' produceret af 'ACME'\n" +"med serienummer 'A1B2C3' kan have denne enheds-URI: \n" +"usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3 \n" +"En netværksprinter med IP 192.168.100.1, der er tilgængelig\n" +"via port 9100, kan have denne enheds-URI: \n" +"socket://192.168.101.202:9100 \n" +"En netværksprinter med IP 192.168.100.2 der er tilgængelig\n" +"via LPD-protokol med det eksterne LPD-kønavn 'lpt1'\n" +"kan have denne enheds-URI: \n" +"lpd://192.168.100.2/lpt1\n" +"" #. ConnectionWizardDialog help 3/6: #: src/helps.ycp:278 msgid "" "\n" "<big>Device URIs for Directly Connected Devices</big> \n" "Devices which are connected via the parallel port or via USB\n" "are autodetected and the appropriate device URI is autogenerated.\n" "For example: \n" "parallel:/dev/lp0 \n" "usb://ACME/FunPrinter \n" "hp:/usb/HP_LaserJet?serial=1234 \n" "Usually only the autogenerated device URIs work.\n" "When the device is not autodetected, there is usually no communication\n" "with the device possible and no data can be sent to the device.\n" "" msgstr "" +"\n" +"<big>Enheds-URI'er for direkte tilsluttede enheder</big> \n" +"Enheder, som er tilsluttet via parallelport eller via USB, findes\n" +"automatisk, og den passende enheds-URI genereres automatisk.\n" +"For eksempel: \n" +"parallel:/dev/lp0 \n" +"usb://ACME/FunPrinter \n" +"hp:/usb/HP_LaserJet?serial=1234 \n" +"Normalt er det kun den automatisk genererede enheds-URI, der virker.\n" +"Hvis enheden ikke findes automatisk, er der normalt ingen mulig\n" +"kommunikation med enheden, og ingen data kan sendes til enheden.\n" +"" #. ConnectionWizardDialog help 4/6: #: src/helps.ycp:291 msgid "" "\n" "<big>Device URIs to Access a Network Printer or a Printserver Box</big> \n" "A printserver box is a small device with a network connection\n" "and a USB or parallel port connection to connect the actual printer.\n" "A network printer has such kind of device built-in.\n" "Access happens via three different network protocols.\n" "See the manual of your network printer or printserver box\n" "what your particular device supports: \n" "TCP Port (AppSocket/JetDirect) \n" "The IP address and a port number is needed to access it.\n" "Often the port number 9100 is the right one.\n" "It is the simplest, fastest, and generally the most reliable protocol.\n" "The matching device URI is: \n" "socket://ip-address:port-number \n" "Line Printer Daemon (LPD) Protocol \n" "A LPD runs on the device and provides one or more LPD queues.\n" "The IP address and a LPD queue name is needed to access it.\n" "Almost all network printers and printserver boxes support it.\n" "Often an arbitrary queue name or 'LPT1' works somehow.\n" "But using a correct LPD queue which does not somehow change\n" "the data or add additional formfeeds or banner pages\n" "could be essential for reliable printing.\n" "The matching device URI is: \n" "lpd://ip-address/queue \n" "Internet Printing Protocol (IPP) \n" "IPP is the native protocol for CUPS which runs on a real computer\n" "but when IPP is implemented in a small printserver box,\n" "it is often not implemented properly. Only use IPP when the vendor\n" "actually documents official support for it. \n" "The matching device URI is: \n" "ipp://ip-address:port-number/resource \n" "What 'port-number' and 'resource' exactly is depends totally\n" "on the particular network printer or printserver box model. \n" "For more information have a look at \n" "http://www.cups.org/documentation.php/network.html\n" "" msgstr "" +"\n" +"<big>Enheds-URIer for adgang til en netværksprinter eller en printserverboks</big> \n" +"En printserverboks er en lille enhed med en netværkstilslutning samt\n" +"en USB- eller parallelport for tilslutning til den egentlige printer.\n" +"En netværksprinter har sådan en type enhede indbygget.\n" +"Adgang sker via tre forskellige netværksprotokoller.\n" +"Se i din netværksprinters eller printserverboks' manual,\n" +"hvad din egen enhed understøtter: \n" +"TCP-port (AppSocket/JetDirect) \n" +"IP-adressen og portnummer skal bruges for at tilgå den.\n" +"Ofte er port nummer 9100 den rette.\n" +"Det er den enkleste, hurtigste og generelt mest troværdige protokol.\n" +"Den matchende enheds-URI er: \n" +"sokkel://ip-adresse:portnummer \n" +"LPD-protokol (Line Printer Daemon) \n" +"En LPD kører på enheden og tilbyder en eller flere LPD-køer.\n" +"IP-adresse og et LPD-kønavn skal bruges for at tilgå den.\n" +"Næsten alle entværksprintere og printserverbokse understøtter den.\n" +"Ofte kan et vilkårligt kønavn eller 'LPT1' fungere.\n" +"Men at benytte en korrekt LPD-kø, der ikke på nogen måde ændrer\n" +"data, tilføjer yderligere sideskift eller skilleark, kan være essentiel\n" +"for en troværdig udskrift.\n" +"Den passende enheds-URI er: \n" +"lpd://ip-adresse/kø \n" +"IPP (Internet Printing Protocol) \n" +"IPP er den oprindelige protokol for CUPS, som kører på en reel computer.\n" +"Men hvor IPP er implementeret i en lille printserverboks, er det ofte\n" +"ikke implementeret ordentligt. Brug kun IPP, når producenten\n" +"reelt dokumenterer understøttelse af den. \n" +"Den passende enheds-URI er: \n" +"ipp://ip-adresse:portnummer/ressource \n" +"Hvad 'portnummer' og 'ressource' nøjagtigt er afhænger af\n" +"den enkelte netværksprinter- eller printserverboks-model. \n" +"For mere information kig på \n" +"http://www.cups.org/documentation.php/network.html\n" +"" #. ConnectionWizardDialog help 5/6: #: src/helps.ycp:328 msgid "" "\n" "<big>Device URIs to Print Via a Print Server Machine</big> \n" "In contrast to a printserver box a print server machine\n" "means a real computer which offers a print service. \n" "Access happens via various different network protocols.\n" "Ask your network administrator what which print server machine\n" "provides in your particular network: \n" "Microsoft Windows/SAMBA (SMB/CIFS) \n" "A server name and a printer share name and optionally a workgroup name\n" "is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "A matching full device URI is: \n" "smb://username:password@workgroup/server/printer \n" "For more information have a look at <tt>man smbspool</tt> and \n" "http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n" "Traditional UNIX Server (LPR) \n" "A Line Printer Daemon (LPD) runs on a traditional UNIX server\n" "and provides one or more LPD queues.\n" "The IP address and a LPD queue name is needed to access it.\n" "The matching device URI is: \n" "lpd://ip-address/queue \n" "CUPS Server \n" "Usually you should not set up a local print queue to access\n" "a remote queue on a CUPS server. Instead do the setup\n" "in the Print Via Network dialog.\n" "Only if you really know that you must set up a local print queue\n" "to access a remote queue on a CUPS server proceed here. \n" "IPP is the native protocol for CUPS which runs on a server.\n" "The official IANA port for IPP is 631.\n" "The matching device URI is: \n" "ipp://ip-address:631/printers/queue \n" "Novell Netware Print Server (IPX) \n" "To access print queues on a Novell Netware print server,\n" "the RPM package ncpfs must be installed.\n" "The package provides the CUPS backend 'novell' which runs\n" "the <tt>nprint</tt> program which actually sends the data\n" "to a Novell Netware print queue.\n" "A server name and a printer queue name is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "The matching device URI is: \n" "novell://username:password@server/queue \n" "For more information have a look at <tt>man nprint</tt> and\n" "the other documentation in the RPM package ncpfs.\n" "" msgstr "" +"\n" +"<big>Enheds-URIer til udskrift via en udskriftservermaskine</big> \n" +"I modsætning til en printserverboks er en printservermaskine\n" +"en reel computer, der tilbyder en udskrifttjeneste. \n" +"Adgang foregår via flere forskellige netværksprotokoller.\n" +"Spørg din netværksadministrator, hvad hvilken printservermaskine\n" +"tilbyder på dit netværk: \n" +"Microsoft Windows/SAMBA (SMB/CIFS) \n" +"For at tilgå dette kræves et servernavn, en printerdelingsnavn og\n" +"valgfrit et navn på en arbejdsgruppe.\n" +"Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" +"En passende komplet enheds-URI er: \n" +"smb://brugernavn:adgangskode@arbejdsgruppe/server/printer \n" +"For mere information kig på <tt>man smbspool</tt> og \n" +"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n" +"Traditionel UNIX-server (LPR) \n" +"En linjeprinterdæmon (LPD) kører på en traditionel UNIX-server\n" +"og tilbyder en eller flere LPD-køer.\n" +"Der kræves en IP adresse og et LPD-kønavn for at tilgå det.\n" +"Den passende enheds-URI er: \n" +"lpd://ip-adresse/kø \n" +"CUPS-server \n" +"Normalt skal du ikke sætte en lokal udskriftskø op for at tilgå\n" +"en ekstern kø på en CUPS-server. Lav i stedet opsætningen\n" +"i dialogen Udskrift via netværk.\n" +"Fortsæt kun her, hvis du er sikker på, at du skal sætte en lokal\n" +"udskriftskø op for at tilgå en ekstern kø på en CUPS-server. \n" +"IPP er den opringdelige protokol for CUPS, der kører på en server.\n" +"Den officielle IANA-port til IPP er 631.\n" +"Den passende enheds-URI er: \n" +"ipp://ip-adresse:631/printers/kø \n" +"IPX (Novell Netware Print Server) \n" +"RPM-pakken ncpfs skal installeres for at tilgå udskriftskøer på\n" +"en Novell Netware printserver.\n" +"Pakken levereren CUPS-backend - 'novell' - der kører programmet\n" +"<tt>nprint</tt>, der faktisk sender dataene til en Novell\n" +"Netware udskriftskø.\n" +"Der kræves servernavn og navn på udskriftskø for at få adgang.\n" +"Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" +"Den passende enheds-URI er: \n" +"novell://brugernavn:adgangskode@server/kø \n" +"For mere information kig på <tt>man nprint</tt> og\n" +"den anden dokumentation i RPM-pakken ncpfs.\n" +"" #. ConnectionWizardDialog help 6/6: #: src/helps.ycp:373 msgid "" "\n" "<big>Special Device URIs</big> \n" "Specify an Arbitrary Device URI\n" "if you know the exact right device URI for your particular case\n" "or to modify an existing device URI in a special way. \n" "Send Print Data to Other Program (pipe) \n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'pipe' which runs\n" "the program that you specified here.\n" "The matching device URI is: \n" "pipe:/path/to/targetcommand \n" "Daisy-chain Backend Error Handler (beh) \n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'beh'. \n" "The backend 'beh' is a wrapper for the usual backend,\n" "which is then called by beh.\n" "This way beh can, depending on its configuration,\n" "repeat the call of the backend or simply hide the error status\n" "of the backend from being seen by the CUPS daemon.\n" "The matching device URI is: \n" "beh:/nodisable/attempts/delay/originalDeviceURI \n" "If nodisable is '1' beh always exits successfully\n" "so that the queue gets never disabled but on the other hand\n" "print jobs are lost if there is an error. \n" "Attempts is the number of attempts to recall the backend\n" "in case of an error. '0' means infinite retries. \n" "Delay is the number of seconds between two attempts\n" "to call the beckend. \n" "The last parameter is the original URI, which the queue had before. \n" "Example: \n" "beh:/1/3/5/socket://ip-address:port-number \n" "The beh backend tries to access a network printer 3 times with 5 second delay\n" "between the attempts. If access still fails, the queue is not disabled\n" "and the print job is lost. \n" "For more information have a look at <tt>/usr/lib[64]/cups/backend/beh</tt> and \n" "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n" "" msgstr "" +"\n" +"<big>Specielle enheds-URIer</big> \n" +"Angiv en vilkårlig enheds-URI,\n" +"hvis du kender det helt rigtige enheds-URI for dit tilfælde, eller\n" +"du vil ændre et eksisterende enheds-URI på en bestemt måde. \n" +"Send udskriftdata til andet program (pipe) \n" +"For at gøre dette skal RPM-pakken cups-backends installeres.\n" +"Pakken leverer en CUPS-backend - 'pipe' - der kører det\n" +"program, du har angivet her.\n" +"Den passende enheds-URI er: \n" +"pipe:/sti/til/målkommando \n" +"Fejlhåndtering for Daisy-chain-backend (beh) \n" +"For at gøre dette skal RPM-pakken cups-backends installeres.\n" +"Pakken leverer en CUPS-backend 'beh'. \n" +"Denne backend - 'beh' - er et omslag for den alm. backend,\n" +"der så kaldes af beh.\n" +"På denne måde kan beh, afhængigt af dens konfiguration,\n" +"gentage kaldet af backend, eller ganske enkelt forhindre, at\n" +"backendens fejlstatus kan ses af CUPS-dæmonen.\n" +"Den passende enheds-URI er: \n" +"beh:/deaktivér_ikke/forsøg/forsinkelse/original_enheds-URI \n" +"Hvis 'deaktivér_ikke' er '1', vil beh altid afslutte, så køen\n" +"aldrig deaktiveres, men på den anden side mistes\n" +"udskriftsopgaver, hvis der er en fejl. \n" +"'Forsøg' er antal forsøg på at genkalde backenden i\n" +"tilfælde af fejl. '0' betyder uendelige genforsøg. \n" +"'Forsinkelse' er antal sekunder mellem to forsøg\n" +"på at kalde backenden. \n" +"Den sidste parameter er den originale URI, som køen havde før. \n" +"Eksempel: \n" +"beh:/1/3/5/sokkel://ip-adresse:portnummer \n" +"Backenden beh prøver at tilgå netværksprinteren printer 3 gange\n" +"med 5 sek. forsinkelse mellem forsøgene. Hvis tilgang stadig fejler,\n" +"deaktiveres køen ikke, og udskriftsopgaverne mistes. \n" +"For mere information kig på <tt>/usr/lib[64]/cups/backend/beh</tt> og \n" +"http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n" +"" #. PrintingViaNetworkDialog help 1/3: #: src/helps.ycp:413 msgid "" "\n" "<big>Printing Via Network</big> \n" "Usually CUPS (Common Unix Printing System) is used to print via network. \n" "By default CUPS uses its so called 'Browsing' mode\n" "to make printers available via network. \n" "In this case remote CUPS servers must publish their printers via network\n" "and accordingly on your host the CUPS daemon process (cupsd) must run\n" "which is listening for incomming information about published printers. \n" "CUPS Browsing information is recieved via UDP port 631.\n" "" msgstr "" +"\n" +"<big>Udskrift via netværk</big> \n" +"Normalt benyttes CUPS (Common Unix Printing System) til udskrift via netværk. \n" +"Som standard bruger CUPS dens såkaldte 'browsing'-tilstand\n" +"til at gøre printere tilgængelige via netværk. \n" +"I så fald skal CUPS-servere publicere deres printere via netværk, og\n" +"følgelig på din værtsmaskine skal CUPS-dæmonprocessen (cupsd) køre.\n" +"Denne lytter efter information om publicerede printere. \n" +"CUPS' browsing-information modtages via UDP-port 631.\n" +"" #. PrintingViaNetworkDialog help 2/3: #: src/helps.ycp:424 msgid "" "\n" "If you print only via network and if you use only one single CUPS server,\n" "there is no need to use CUPS Browsing and have a CUPS daemon running on your host.\n" "Instead it is simpler to specify the CUPS server and access it directly.\n" "" msgstr "" +"\n" +"Hvis du kun udskriver via netværk, og hvis du kun bruger en enkelt CUPS-server,\n" +"behøver du ikke benytte CUPS-browsing og have en CUPS-dæmon kørende på din vært.\n" +"I stedet er det enklere at angive CUPS-serveren og tilgå den direkte.\n" +"" #. PrintingViaNetworkDialog help 3/3: #: src/helps.ycp:430 msgid "" "\n" "If there is no CUPS server in your network or if you must additionally use\n" "another kind of print server (e.g. print via a Windows/SMB server\n" "or print via a traditional Unix LPR server) or if you must access\n" "a network printer directly, you have to set up an appropriate print queue\n" "on your host.\n" "" msgstr "" +"\n" +"Hvis der ikke findes nogen CUPS-server på dit netværk, hvis du\n" +"yderligere skal bruge en anden slags udskriftserver (f.eks. udskrift\n" +"via en Windows/SMB server eller en traditionel Unix LPR-server),\n" +"eller hvis du skal tilgå en netværksprinter direkte, skal du sætte\n" +"en passende udskriftskø op på din vært.\n" +"" #. SharingDialog help 1/2: #: src/helps.ycp:440 msgid "" "\n" "<big>Sharing Print Queues and Publish Them Via Network</big> \n" "Usually CUPS (Common Unix Printing System) should be set up to use\n" "its so called 'Browsing' mode to make printers available via network. \n" "In this case CUPS servers publish their local print queues via network\n" "and accordingly on CUPS client systems the CUPS daemon process (cupsd) must run\n" "which is listening for incomming information about published printers. \n" "CUPS Browsing information is recieved via UDP port 631.\n" "" msgstr "" +"\n" +"<big>Dele udskriftskøer og publicere dem via netværk</big> \n" +"CUPS (Common Unix Printing System) skulle normalt være sat op til at bruge\n" +"dens såkaldte 'browsing'-tilstand, for at gøre dem tilgængelige via netværk. \n" +"I så fald skal CUPS-servere publicere deres printere via netværk, og\n" +"følgelig på din værtsmaskine skal CUPS-dæmonprocessen (cupsd) køre.\n" +"Denne lytter efter information om publicerede printere. \n" +"CUPS' browsing-information modtages via UDP-port 631.\n" +"" #. SharingDialog help 2/2: #: src/helps.ycp:450 msgid "" "\n" "First of all CUPS client systems must be allowed to access the CUPS server.\n" "Then specify whether or not printers should be published to the clients.\n" "It is not required to publish printers in any case.\n" "If you have only one single CUPS server, there is no need to use CUPS Browsing.\n" "Instead it is simpler to specify the CUPS server on the client systems\n" "(via 'Printing Via Network') so that the clients access the server directly.\n" "" msgstr "" +"\n" +"Alle CUPS klientsystemer skal først og fremmest have lov til at tilgå CUPS-serveren.\n" +"Angiv derefter, hvorvidt printere skal publiceres til klienterne eller ej.\n" +"Det kræves ikke, at printere skal publiceres i nogen tilfælde.\n" +"der er ingen grund til at bruge CUPS-browsing, hvis du blot har en enkelt CUPS-server.\n" +"I stedet er det enklere at angive CUPS-serveren på klientsystemerne\n" +"(via 'Udskrift via netværk'), så klienterne kan tilgå serveren direkte.\n" +"" #. Operation Policy help 1/1: #: src/helps.ycp:461 msgid "" "\n" "<big>CUPS Operation Policy</big> \n" "Operation policies are the rules used for each operation in CUPS.\n" "Such operations are for example 'print something', 'cancel a printout',\n" "'configure a printer', 'modify or remove a printer configuration',\n" "and 'enable or disable printing'.\n" "" msgstr "" +"\n" +"<big>CUPS' handlingspolitik</big> \n" +"Handlingspolitik er reglerne, der anvendes til hver handling i CUPS.\n" +"Sådanne handlinger kan f.eks. være 'skriv noget ud', 'annullér en udskrift',\n" +"'konfigurér en printer', 'ændr eller fjern en printerkonfiguration' og\n" +"'aktivér eller deaktivér udskrift'.\n" +"" #. Autoconfig help 1/1: #: src/helps.ycp:471 msgid "" "\n" "<big>CUPS Autoconfiguration for USB Printers</big> \n" "When a USB printer is connected to the system\n" "cups-autoconfig determines if the printer is already configured. \n" "If it is already configured, printing is enabled.\n" "If the printer is not configured, cups-autoconfig attempts\n" "to select an appropriate driver for it and, if successful,\n" "cups-autoconfig configures it.\n" "When a USB printer is removed, cups-autoconfig can disable printing.\n" "" msgstr "" +"\n" +"<big>Automatisk konfiguration af CUPS for USB-printere</big> \n" +"Når en USB-printer tilsluttes systemet afgør cups-autoconfig\n" +"om printeren allerede er konfigureret.\n" +"Hvis dette er tilfældet, er udskrift aktiveret.\n" +"Hvis printeren derimod ikke er konfigureret vil cups-autoconfig\n" +"forsøge at vælge en passende driver for den, og, hvis det lykkes,\n" +"konfigurere denne.\n" +"Når en USB-printer fjernes, kan cups-autoconfig deaktivere udskrift.\n" +"" #. Useless help 1/1: #: src/helps.ycp:484 msgid "" "\n" "<big>Intentionally no help</big> \n" "This is an experimental YaST module. \n" "The dialog should be self-explanatory. \n" "Usability experts state that a UI is very likely\n" "bad designed when explanation texts are needed. \n" "For a real test whether the dialog is self-explanatory or not,\n" "there must be no help text at all. \n" "Unfortunately it is not possible to remove the\n" "help sub-window from 'Wizard' dialogs\n" "(this dialog is a so called 'Wizard' dialog).\n" "" msgstr "" +"\n" +"<big>Bevidst ingen hjælp</big> \n" +"Dette er et eksperimentelt YaST-modul. \n" +"Dialogen skulle være selvforklarende. \n" +"Brugelighedseksperter udtaler, at hvis forklarende tekster\n" +"er nødvendige, er den grafiske brugerflade dårligt designet. \n" +"For virkelig at teste, om dialogen er selvforklarende eller ej,\n" +"må der slet ikke være nogen hjælpetekst. \n" +"Desværre er det ikke muligt at fjerne sub-vinduet 'Hjælp' fra\n" +"'guide'-dialogerne (denne dialog er en såkaldt guide-dialog).\n" +"" # #. Label for CheckBoxes to select local and/or remote print queues to be listed: #: src/overview.ycp:50 -#, fuzzy msgid "Show" -msgstr "Vis alle" +msgstr "Vis" #. CheckBox to select local print queues to be listed: #: src/overview.ycp:57 -#, fuzzy msgid "&Local" -msgstr "Lokal" +msgstr "&Lokal" #. CheckBox to select remote print queues to be listed: #: src/overview.ycp:64 -#, fuzzy msgid "&Remote" -msgstr "Ekstern" +msgstr "Ekste&rn" #. Header of a Table column with a list of print queues. #. Print queue name: #: src/overview.ycp:89 msgid "Name" -msgstr "" +msgstr "Navn" # #. Header of a Table column with a list of print queues. #. Whether or not is is the default queue: #: src/overview.ycp:98 -#, fuzzy msgid "Default" -msgstr "Standardkø" +msgstr "Standard" # push button label #. PushButton label to modify an already configured print queue: #: src/overview.ycp:111 -#, fuzzy msgid "&Configure" -msgstr "Konfigurér" +msgstr "&Konfigurér" #. PushButton label to refresh the list of print queues: #: src/overview.ycp:118 msgid "Re&fresh List" -msgstr "" +msgstr "Genop&frisk liste" # #. PushButton label to print a test page: #: src/overview.ycp:122 -#, fuzzy msgid "Print &Test Page" -msgstr "Udskriv testside" +msgstr "Udskriv &testside" # #. Show the CUPS server name if it is a client-only config #. where %1 will be replaced by the CUPS server name. #: src/overview.ycp:143 -#, fuzzy, ycp-format +#, ycp-format msgid "CUPS Server %1" -msgstr "CUPS serverindstillinger" +msgstr "CUPS-server %1" # #. Body of a Popup::AnyMessage when no queue was selected from the list: #: src/overview.ycp:241 src/overview.ycp:288 src/overview.ycp:382 -#, fuzzy msgid "Select an entry." -msgstr "Vælg en enhed." +msgstr "Vælg en indgang." #. Header of a Popup::AnyMessage when a remote queue was selected to be deleted: #: src/overview.ycp:247 msgid "Cannot Delete" -msgstr "" +msgstr "Kan ikke slette" #. Body of a Popup::AnyMessage when a remote queue was selected to be deleted: #: src/overview.ycp:249 msgid "This is a remote configuration. Only local configurations can be deleted." -msgstr "" +msgstr "Denne er en ekstern konfiguration. Kun lokale konfigurationer kan slettes." #. Header of a confirmation popup before a queue will be deleted: #: src/overview.ycp:254 -#, fuzzy msgid "Confirm Deletion" -msgstr "Konfiguration" +msgstr "Bekræft sletning" #. Body of a confirmation popup before a queue will be deleted: #: src/overview.ycp:256 msgid "The selected configuration would be deleted immediately and cannot be restored." -msgstr "" +msgstr "Den valgte konfiguration vil blive slettet omgående og kan ikke genoprettes." # #. 'Yes' button label of a confirmation popup before a queue will be deleted: #: src/overview.ycp:258 -#, fuzzy, ycp-format +#, ycp-format msgid "Delete configuration %1" -msgstr "Standardkonfiguration" +msgstr "Slet konfiguration %1" #. 'No' button label of a confirmation popup before a queue will be deleted: #: src/overview.ycp:260 msgid "Do not delete it" -msgstr "" +msgstr "Slet den ikke" # #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because before the function Printer::DeleteQueue #. was called and this function would have shown more specific messages. #: src/overview.ycp:272 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to delete configuration %1." -msgstr "Sæt standardkø" +msgstr "Sletning af konfiguration %1 fejlede." # #. Header of a Popup::AnyMessage when the queue rejects print jobs: #: src/overview.ycp:294 -#, fuzzy msgid "Rejecting Print Jobs" -msgstr "Afvis udskriftsopgaver" +msgstr "Afviser udskriftsopgaver" #. Body of a Popup::AnyMessage when the queue rejects print jobs: #: src/overview.ycp:296 msgid "The testpage cannot be printed because print jobs are rejected." -msgstr "" +msgstr "Denne testside kan ikke udskrives, da udskriftsopgaver afvises." #. Header of a Popup::AnyMessage when printing is disabled for the queue: #: src/overview.ycp:302 -#, fuzzy msgid "Printout Disabled" -msgstr "Udskrift &færdig" +msgstr "Udskrift deaktiveret" #. Body of a Popup::AnyMessage when printing is disabled for the queue: #: src/overview.ycp:304 msgid "The testpage cannot be printed because printout is disabled." -msgstr "" +msgstr "Denne testside kan ikke udskrives, da udskrift er deaktiveret." #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/overview.ycp:320 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to print testpage for %1." -msgstr "Model ikke specificeret for køen %1." +msgstr "Udskrift af testside for %1 fejlede." #. Popup message #. where %1 will be replaced by the queue name. #: src/overview.ycp:326 #, ycp-format msgid "Sent testpage to %1. Is should start to print soon." -msgstr "" +msgstr "Testside til %1 er sendt. Udskrift skulle starte om et øjeblik." # #. PopupYesNoHeadline headline #. where %1 will be replaced by the server name: #. It was initially a client-only config, #. but now the user has activated the "Get browsing info" radio button. #. "Get browsing info" means "no longer client-only" regardless #. if the browse_allow_value string is effectively empty or it contains "none" #. so that the client-only config is to be disabled in any case: #. PopupYesNoHeadline headline #. where %1 will be replaced by the server name: #: src/overview.ycp:341 src/printingvianetwork.ycp:435 src/sharing.ycp:506 -#, fuzzy, ycp-format +#, ycp-format msgid "Disable remote CUPS server '%1'" -msgstr "Specificér CUPS-serveren på en anden maskine" +msgstr "Deaktivér ekstern CUPS-server '%1'" #. PopupYesNoHeadline body: #: src/overview.ycp:343 msgid "A remote CUPS server setting conflicts with adding a configuration." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med tilføjelse af konfiguration." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Popup::ErrorDetails message: #: src/overview.ycp:353 src/printingvianetwork.ycp:396 #: src/printingvianetwork.ycp:445 src/printingvianetwork.ycp:553 #: src/sharing.ycp:522 msgid "Failed to remove the 'ServerName' entry in /etc/cups/client.conf" -msgstr "" +msgstr "Fjernelse af indgangen 'ServerName' i /etc/cups/client.conf fejlede" #. Header of a Popup::AnyMessage when a remote queue was selected to be modified: #: src/overview.ycp:388 msgid "Cannot Modify" -msgstr "" +msgstr "Kan ikke ændre" #. Body of a Popup::AnyMessage when a remote queue was selected to be modified: #: src/overview.ycp:390 msgid "This is a remote configuration. Only local configurations can be modified." -msgstr "" +msgstr "Dette er en ekstern konfiguration. Kun lokale konfigurationer kan ændres." # #. Command line help text for the Xprinter module #: src/printer.ycp:54 -#, fuzzy msgid "Configuration of printer" -msgstr "Konfigurationsoversigt for printere" +msgstr "Konfiguration af printer" #. Rich text title for Printer in proposals #: src/printer_proposal.ycp:85 msgid "Printer" -msgstr "Printere" +msgstr "Printer" #: src/printingvianetwork.ycp:46 msgid "Use CUPS to Print Via Network" -msgstr "" +msgstr "Brug CUPS til udskrift via netværk" #: src/printingvianetwork.ycp:54 msgid "&Do not Receive Printer Information from Remote CUPS servers" -msgstr "" +msgstr "Mo&dtag ikke printerinformation fra eksterne CUPS-servere" # #: src/printingvianetwork.ycp:61 -#, fuzzy msgid "Receive Printer &Information from Remote CUPS servers" -msgstr "Specificér CUPS-serveren på en anden maskine" +msgstr "Modtag printer&information fra eksterne CUPS-servere" #: src/printingvianetwork.ycp:70 msgid "Accept Information from the Following Servers" -msgstr "" +msgstr "Acceptér information fra de følgende servere" #: src/printingvianetwork.ycp:77 msgid "Usual &General Setting" -msgstr "" +msgstr "Normal &generel indstilling" #: src/printingvianetwork.ycp:87 msgid "Optional Specific IP Addresses or &Network/Netmask" -msgstr "" +msgstr "Valgfrie specifikke IP-adresser eller &netværk/netmaske" #: src/printingvianetwork.ycp:93 msgid "(each nnn.nnn.nnn.nnn or nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm separated by one space)" -msgstr "" +msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm adskilt med ét mellemrum)" #: src/printingvianetwork.ycp:103 msgid "Do All Your Printing Directly via &One Remote CUPS Server" -msgstr "" +msgstr "F&oretag alle dine udskrifter direkte via én ekstern CUPS-server" #: src/printingvianetwork.ycp:112 -#, fuzzy msgid "&Hostname / IP Address" -msgstr "&IP-adresse" +msgstr "&Værtsnavn / IP-adresse" #: src/printingvianetwork.ycp:119 msgid "&Test Server" -msgstr "" +msgstr "&Test server" #: src/printingvianetwork.ycp:129 msgid "Use Another Print Server or Use a Network Printer Directly" -msgstr "" +msgstr "Brug en anden udskriftserver, eller brug en netværksprinter direkte" #: src/printingvianetwork.ycp:133 -#, fuzzy msgid "&Connection Wizard" -msgstr "Tilslutningsguide" +msgstr "Tilslutnings&guide" #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:149 #, ycp-format msgid "The server '%1' is accessible via port 631 (IPP/CUPS)." -msgstr "" +msgstr "Serveren '%1' er tilgængelig via port 631 (IPP/CUPS)." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:154 #, ycp-format msgid "The server '%1' is not accessible via port 631 (IPP/CUPS)." -msgstr "" +msgstr "Serveren '%1' er ikke tilgængelig via port 631 (IPP/CUPS)." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:159 #, ycp-format msgid "The server '%1' responds to a 'ping' in the network." -msgstr "" +msgstr "Serveren '%1' svarer på et 'ping' på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:164 #, ycp-format msgid "The server '%1' does not respond to a 'ping' in the network." -msgstr "" +msgstr "Serveren '%1' svarer ikke på et 'ping' på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:169 #, ycp-format msgid "The server name '%1' is known in the network." -msgstr "" +msgstr "Servernavnet '%1' er kendt på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:174 #, ycp-format msgid "The server name '%1' is not known in the network." -msgstr "" +msgstr "Servernavnet '%1' er ikke kendt på netværket." #. netcat is required for a meaningful test. #. Show negative feedback: #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:190 msgid "Cannot execute the program 'netcat'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'netcat'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:192 msgid "The RPM package 'netcat' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'netcat' kræves, for at testen giver mening." #. ping is required for the less meaningful test. #. Show negative feedback: #. Popup::ErrorDetails message #: src/printingvianetwork.ycp:226 msgid "Cannot execute the program 'ping'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'ping'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:228 msgid "The RPM package 'iputils' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'iputils' kræves, for at testen giver mening." #. The netcat-test failed but the ping-test was successful. #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:241 -#, fuzzy, ycp-format +#, ycp-format msgid "The server '%1' is not accessible" -msgstr "Printserveren er tilgængelig." +msgstr "Serveren '%1' er ikke tilgængelig." #. host is required for the last test. #. Show negative feedback: #. Popup::ErrorDetails message #: src/printingvianetwork.ycp:263 msgid "Cannot execute the program 'host'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'host'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:265 msgid "The RPM package 'bind-utils' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'bind-utils' kræves, for at testen giver mening." #. The netcat-test and the ping-test failed but the host-test was successful. #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:278 #, ycp-format msgid "The server '%1' does not respond in the network" -msgstr "" +msgstr "Serveren '%1' svarer ikke på netværket" #. The netcat-test and the ping-test and the host-test failed: #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:294 #, ycp-format msgid "The server '%1' is unknown" -msgstr "" +msgstr "Serveren '%1' er ukendt" #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:331 msgid "Failed to set 'BrowseAllow none' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'BrowseAllow none' i /etc/cups/cupsd.conf" #. A "Get browsing info" config with a local cupsd was switched #. to a "No browsing info" config with a local running cupsd. #. The Printerlib::GetAndSetCupsdStatus("restart") function #. already waits 40 seconds but the default BrowseTimeout value #. for the local cupsd is 5 minutes. #. Therefore it takes by default 5 minutes until printer information #. that was previously received by Browsing is removed (via timeout) #. from the local cupsd's list. #. I assume most users do not like to wait 5 minutes which is no problem #. because they can just click the [OK] button to continue but then #. they are at least informend why there may be still remote queues: #. Popup message: #: src/printingvianetwork.ycp:353 msgid "" "When switching from 'receive information' to 'do not receive information'\n" "it takes usually 5 minutes until already received information faded away..." msgstr "" +"Under skift fra 'modtag information' til 'modtag ikke information' tager\n" +"det normalt 5 minutter, før allerede modtaget information fortoner sig..." #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:384 src/printingvianetwork.ycp:640 #, ycp-format msgid "Failed to set 'ServerName %1' in /etc/cups/client.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'ServerName %1' i /etc/cups/client.conf" #. PopupYesNoHeadline body: #: src/printingvianetwork.ycp:437 msgid "A remote CUPS server setting conflicts with receiving printer information." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med modtagelse af printerinformation." #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:498 src/sharing.ycp:464 msgid "Failed to set 'Browsing On' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Browsing On' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by the values for BrowseAllow. #: src/printingvianetwork.ycp:512 #, ycp-format msgid "Failed to set BrowseAllow value(s) '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte BrowseAllow-værdierne '%1' i /etc/cups/cupsd.conf" #. Header of a Popup::ContinueCancelHeadline #. when a client-only server is not accessible #. where %1 will be replaced by the server name: #: src/printingvianetwork.ycp:575 -#, fuzzy, ycp-format +#, ycp-format msgid "Continue regardless that '%1' is not accessible?" -msgstr "Printserveren er tilgængelig." +msgstr "Vil du fortsætte, selvom '%1' ikke er tilgængelig?" #. Body of a Popup::ContinueCancelHeadline #. when a client-only server is not accessible: #: src/printingvianetwork.ycp:580 msgid "A non-accessible server leads to an endless sequence of further failures." -msgstr "" +msgstr "En ikke-tilgængelig server fører til en uendelig sekvens af yderligere fejl." #. The user has decided to continue regardless that the client-only server is not accessible. #. In this case the cups_client_only tool fails in any case because it also tests accessibility. #. But cups_client_only might have failed for whatever other reason. #. Therefore a Popup::MessageDetails is shown to inform about the actual result: #. Popup::MessageDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:632 #, ycp-format msgid "Tried to set 'ServerName %1' in /etc/cups/client.conf" -msgstr "" +msgstr "Prøvede at sætte 'ServerName %1' i /etc/cups/client.conf" #. Popup::Error message: #: src/printingvianetwork.ycp:803 src/sharing.ycp:949 msgid "Failed to apply the settings to the system." -msgstr "" +msgstr "Anvendelse af indstillingen i systemet fejlede." # #. A RadioButton label to deny remote access to local print queues: #: src/sharing.ycp:63 -#, fuzzy msgid "&Deny remote access" -msgstr "Fjernadgang" +msgstr "Nægt ekstern a&dgang" # #. A RadioButton label to allow remote access to local print queues: #: src/sharing.ycp:73 -#, fuzzy msgid "&Allow remote access" -msgstr "Fjernadgang" +msgstr "Till&ad ekstern adgang" #. A CheckBox label to allow remote access to local print queues #. for computers within the local network: #: src/sharing.ycp:89 msgid "For computers within the &local network" -msgstr "" +msgstr "Til computere indenfor det &lokale netværk" #. A CheckBox label to publish local print queues by default within the local network: #: src/sharing.ycp:100 msgid "&Publish printers by default within the local network" -msgstr "" +msgstr "&Publicér printere som standard indenfor det lokale netværk" #. A caption for a table to allow remote access to local print queues #. via network interfaces specified in the table below: #: src/sharing.ycp:111 msgid "Via network interfaces specified below" -msgstr "" +msgstr "Via netværksgrænsefladerne angivet herunder" # #. A table column header where the column lists network interfaces: #: src/sharing.ycp:118 -#, fuzzy msgid "Interface" -msgstr "Intern zone" +msgstr "Grænseflade" #. A table column header where the column shows whether or not #. local print queues are published by default #. via the network interface in the other table column: #: src/sharing.ycp:122 msgid "Publish printers by default via this interface" -msgstr "" +msgstr "Publicér printere som standard via denne grænseflade" #. A PushButton label to add a network interface to the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:132 msgid "&Add" -msgstr "" +msgstr "&Tilføj" #. A PushButton label to change a network interface in the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:138 msgid "&Edit" -msgstr "" +msgstr "&Redigér" #. A PushButton label to delete a network interface from the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:144 msgid "&Delete" -msgstr "" +msgstr "&Slet" #. A caption for a table to allow remote access to local print queues #. for hosts and/or networks specified in the table below: #: src/sharing.ycp:161 msgid "For hosts / networks specified below" -msgstr "" +msgstr "Til værtsmaskiner / netværk angivet herunder" #. A table column header where the column shows whether or not #. local print queues are published by default #. via the IP address in the other table column: #: src/sharing.ycp:172 msgid "Publish printers by default for this address" -msgstr "" +msgstr "Publicér printere som standard for denne adresse" #. A PushButton label to add an IP address to the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:182 msgid "A&dd" -msgstr "" +msgstr "T&ilføj" #. A PushButton label to change an IP address in the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:188 msgid "Ed&it" -msgstr "" +msgstr "R&ediger" #. A PushButton label to delete an IP address from the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:194 msgid "De&lete" -msgstr "" +msgstr "S&let" #. A CheckBox label to publish local print queues by default #. via a partivular network interface which is shown below. #: src/sharing.ycp:215 msgid "&Publish printers by default via the network interface below." -msgstr "" +msgstr "&Publicér printere som standard via netværksgrænsefladen herunder." #. A header for a ComboBox which lists network interfaces: #: src/sharing.ycp:222 msgid "Available Network &Interfaces:" -msgstr "" +msgstr "Tilgængelige netværks&grænseflader:" #: src/sharing.ycp:256 msgid "&Publish printers by default via " -msgstr "" +msgstr "&Publicér printere som standard via " #. translators: input field label for list of configured IPs #: src/sharing.ycp:258 -#, fuzzy msgid "Network &Address:" -msgstr "Netværksprintere" +msgstr "Netværks&adresse:" #. Popup::ErrorDetails message. #. Do not change or translate "Listen localhost", it is a system settings name. #: src/sharing.ycp:353 msgid "Failed to set only 'Listen localhost' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes kun at sætte 'Listen localhost' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "Allow", it is a system settings name. #: src/sharing.ycp:361 msgid "Failed to remove 'Allow' entries from /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at fjerne 'Allow'-indgange fra /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "BrowseAddress", it is a system settings name. #: src/sharing.ycp:374 msgid "Failed to remove 'BrowseAddress' entries from /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at fjerne 'BrowseAddress'-indgange fra /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by one or more system settings values. #. Do not change or translate "Allow", it is a system settings name. #: src/sharing.ycp:436 #, ycp-format msgid "Failed to set 'Allow' entries '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Allow'-indgangene '%1' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by one or more system settings values. #. Do not change or translate "BrowseAddress", it is a system settings name. #: src/sharing.ycp:453 #, ycp-format msgid "Failed to set 'BrowseAddress' entries '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'BrowseAddress'-indgangene '%1' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "Listen *:631", it is a system settings name. #: src/sharing.ycp:479 msgid "Failed to set 'Listen *:631' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Listen *:631' i /etc/cups/cupsd.conf" #. PopupYesNoHeadline body: #: src/sharing.ycp:510 msgid "A remote CUPS server setting conflicts with sharing local printer configurations." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med deling af lokale printerkonfigurationer." # #. Initialization dialog caption #: src/wizards.ycp:124 -#, fuzzy msgid "Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Konfiguration af printer" #. Initialization dialog contents #: src/wizards.ycp:126 msgid "Initializing..." -msgstr "" - -#, fuzzy =============================================================================== Diff created and cleaned up --------------------------- Total number of messages minus fake ones equals total number of real messages. 278 - 0 = 278 Messages that did not need clean up: Changed: 165 : Fyzzy : 113 Messages that was cleaned up : Changed: 0 : Fyzzy : 0 : --------------------------------- Total : 278 ===============================================================================

2 2

[opensuse-da] yast - printer.da.po (igen-igen-igen)
by Jan Madsen 03 Nov '08

03 Nov '08

#. Message of a Popup::Error. #. Only a simple message because this error does not happen on a normal system. #: src/Printer.ycp:1979 msgid "" "Failed to set up the firewall settings.\n" "Use the specific YaST Firewall module." msgstr "" +"Mislykkedes at sætte firewall-indstillinger op.\n" +"Brug det specifikke YaST Firewall-modul." #. Message of a Popup::Error where %1 will be replaced by the package name. #. Only a simple message because: #. Either the user has explicitely rejected to remove the package, #. or this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printerlib.ycp:155 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to remove package %1." -msgstr "Installation af den kræved pakke %1 fejlede." +msgstr "Fjernelse af pakken %1 fejlede." #. CheckBox to have no automatic configuration of USB printers at all #. by removing the cups-autoconfig RPM package. #. Do not change or translate "cups-autoconfig", it is a RPM package name. #: src/autoconfig.ycp:72 msgid "No Automatic Configuration at all: &Remove the cups-autoconfig package." -msgstr "" +msgstr "Ingen automatisk konfiguration overhovedet: Fje&rn pakken cups-autoconfig ." #. Title of the Basic Modify Dialog where %1 will be replaced by the queue name. #. The actual queue name is a system value which cannot be translated: #: src/basicmodify.ycp:67 -#, fuzzy, ycp-format +#, ycp-format msgid "Modify %1" -msgstr "Ændr" +msgstr "Ændr %1" #. Title of the Add Driver Dialog: #: src/driveradd.ycp:48 -#, fuzzy msgid "Add Driver" -msgstr "&Tilføj driver" +msgstr "Tilføj driver" #. Header for a dialog section where the user can #. add or remove printer driver packages: #: src/driveradd.ycp:63 msgid "Install or Remove Printer Driver Packages" -msgstr "" +msgstr "Installér eller fjern printerdriver-pakker" #. CheckBox to select or un-select the printer driver package cups-drivers. #. There is no need to have the package name "cups-drivers" in this text #. because it is shown in a separated column to the left of this text. #: src/driveradd.ycp:75 msgid "Various Standard Drivers" -msgstr "" +msgstr "Forskellige standarddrivere" #. CheckBox to select or un-select the printer driver package gutenprint. #. There is no need to have the package name "gutenprint" in this text #. because it is shown in a separated column to the left of this text. #. Do not change or translate "Gutenprint", it is a open source project name. #. Do not change or translate "Gimp-Print", it is a open source project name. #: src/driveradd.ycp:87 msgid "Gutenprint/Gimp-Print Driver" -msgstr "" +msgstr "Gutenprint/Gimp-Print-driver" #. CheckBox to select or un-select the printer driver packages hplip and hplip-hpijs. #. There is no need to have the package names "hplip" and "hplip-hpijs" in this text #. because they are shown in a separated column to the left of this text. #: src/driveradd.ycp:97 msgid "Driver for HP Printers and All-in-One Devices" -msgstr "" +msgstr "Drivere til HP-printere og All-in-One-enheder" #. CheckBox to select or un-select the printer driver package manufacturer-PPDs. #. There is no need to have the package name "manufacturer-PPDs" in this text #. because it is shown in a separated column to the left of this text. #: src/driveradd.ycp:107 msgid "Printer Description Files for PostScript Printers" -msgstr "" +msgstr "Printerbeskrivelsesfiler PostScript-printere" #. CheckBox to select or un-select the printer driver package ghostscript-omni. #. There is no need to have the package name "ghostscript-omni" in this text #. because it is shown in a separated column to the left of this text. #: src/driveradd.ycp:117 msgid "The Omni Printer Driver (Unmaintained)" -msgstr "" +msgstr "Omni-printerdriver (ikke vedligeholdt)" #. CheckBox to select or un-select the printer driver package filters #. which provides some makeshift drivers only for a few of the #. non-standard printers (the so called "GDI printers"). #. There is no need to have the package name "filters" in this text #. because it is shown in a separated column to the left of this text. #: src/driveradd.ycp:129 msgid "Makeshift Drivers for a Few Non-Standard (GDI) Printers" -msgstr "" +msgstr "Makeshift-drivere til nogle få ikke-standard- (GDI) printere" #. Header for a dialog section where the user can #. make a printer description file (PPD file) available #. so that it can be used to set up a print queue with it: #: src/driveradd.ycp:142 msgid "Make a Printer Description File Available" -msgstr "" +msgstr "Gør en printerbeskrivelsesfil tilgængelig" #. TextEntry to specify the full path of a PPD file: #: src/driveradd.ycp:152 msgid "&Printer description file name with full path where it is located" -msgstr "" +msgstr "&Printerbeskrivelsesfilens navn med fuld søgesti til hvor den er placeret" #. Label of a PushButton to open a file selection box #. to browse the file system to select a PPD file: #: src/driveradd.ycp:158 msgid "&Browse" -msgstr "" +msgstr "&Gennemse" #. Popup::ErrorDetails message #. where %1 will be replaced by the file name: #: src/driveradd.ycp:401 #, ycp-format msgid "Cannot access '%1'" -msgstr "" +msgstr "Kan ikke tilgå '%1'" #. Popup::ErrorDetails message: #: src/driveradd.ycp:412 msgid "The printer description file is not in compliance to the specification." -msgstr "" +msgstr "Printerbeskrivelsesfilen er ikke overensstemmelse med specifikationen." #. Header of a Popup::ContinueCancelHeadline #. when a PPD file is not in compliance: #: src/driveradd.ycp:419 msgid "Use the printer description file regardless of its errors?" -msgstr "" +msgstr "Vil du bruge printerbeskrivelsesfilen uanset dens fejl?" #. Body of a Popup::ContinueCancelHeadline #. when PPD file is not in compliance: #: src/driveradd.ycp:422 msgid "A non-compliant printer description file can lead to arbitrary failures." -msgstr "" +msgstr "En ikke-overensstemmende printerbeskrivelsesfil kan føre til tilfældige fejl." # #. Popup::ErrorDetails message: #: src/driveradd.ycp:431 -#, fuzzy msgid "Failed make the printer description file available" -msgstr "Oprettelse af printer-driver-databasen fejlede." +msgstr "Mislykkedes at gøre printerbeskrivelsesfilen tilgængelig" # #. Title of the Driver Options Dialog where %1 will be replaced by the queue name. #. The actual queue name is a system value which cannot be translated: #: src/driveroptions.ycp:50 -#, fuzzy, ycp-format +#, ycp-format msgid "Driver Options for Queue %1" -msgstr "Driver-valgmuligheder for kø" +msgstr "Driver-valgmuligheder for køen %1" #. AddDriverDialog help 1/2: #: src/helps.ycp:247 msgid "" "\n" "<big>Add or Remove Printer Driver Packages</big> \n" "When a printer driver package is not marked, it is not installed\n" "and then you can select it so that it will be installed. \n" "When a printer driver package is marked, it is installed\n" "and then you can un-select it so that it will be removed.\n" "In the latter case it is up to you to make sure\n" "that there is no printer configuration which needs the driver. \n" "" msgstr "" +"\n" +"<big>Tilføj eller fjern printerdriver-pakker</big> \n" +"Når en printerdriver-pakke ikke er markeret, er den ikke\n" +"installeret, og du kan så vælge den til installation. \n" +"Når en printerdriver-pakke er markeret, er den installeret,\n" +"og du kan så fravælge den, så den bliver fjernet.\n" +"I det sidste tilfælde er det op til dig at tilsikre, at der ikke\n" +"er en printerkonfiguration, som behøver driveren. \n" +"" #. AddDriverDialog help 2/2: #: src/helps.ycp:257 msgid "" "\n" "<big>Add a Printer Description File</big> \n" "To set up a printer configuration a printer description file\n" "(PPD file) is required. \n" "When a PPD file is not located in the /usr/share/cups/model/ directory,\n" "it is not available to set up a printer configuration with it.\n" "Therefore you can specify the full path of a PPD file\n" "which is located elsewhere on your system to get it installed\n" "in the /usr/share/cups/model/ directory. \n" "Note that a printer description file is not a driver. \n" "For non-PostScript printers the PPD file alone is\n" "not sufficient to set up a working printer configuration.\n" "In particular it does not work for non-PostScript printers\n" "to download a PPD file from the Internet and then set up\n" "the printer with such a PPD file.\n" "The plain printer setup would work but actual printing\n" "would not work because the driver is missing.\n" "For non-PostScript printers you need a printer driver\n" "and a PPD file which matches exactly to the particular driver.\n" "Matching PPD files are automatically installed at the right place\n" "when you install the above mentioned printer driver packages. \n" "Only for PostScript printers, a PPD file alone is usually\n" "sufficient to set up a working PostScript printer configuration.\n" "In particular it is sufficient when the PPD file does not\n" "contain a 'cupsFilter' entry because such an entry would\n" "reference a printer driver. \n" "" msgstr "" +"\n" +"<big>Tilføj en printerbeskrivelsesfil</big> \n" +"En printerbeskrivelsesfil (PPD-fil) kræves for at sætte en\n" +"printerkonfiguration op. \n" +"Når en PPD-fil ikke findes i mappen /usr/share/cups/model/, er\n" +"den ikke tilgængelig til opsætning af en printerkonfiguration.\n" +"Du kan derfor angive den fulde søgesti til en PPD-fil, der findes\n" +"andetsteds på dit system, for at få den installeret i mappen\n" +"/usr/share/cups/model/. \n" +"Bemærk at en printerbeskrivelsesfil ikke er en driver. \n" +"Til ikke-PostScript-printere er PPD-filen alene ikke nok til\n" +"opsætning af en fungerende printerkonfiguration.\n" +"Specielt virker det ikke for ikke-PostScript-printere at\n" +"downloade en PPD-fil fra internettet, for derefter at sætte\n" +"printeren op med en sådan PPD-fil.\n" +"Den enkle opsætning af printeren vil fungere, men den faktiske\n" +"udskrivning virker ikke, da driveren mangler.\n" +"Til ikke-PostScript-printere skal du bruge en printerdriver og\n" +"en PPD-fil, der matcher fuldstændigt til den enkelte driver.\n" +"Matchende PPD-filer installeres automatisk på den rette plads,\n" +"når du installerer printerdriver-pakkerne nævnt ovenfor. \n" +"Kun til PostScript-printere er en PPD-fil alene normalt nok til\n" +"at sætte en fungerende PostScript-printerkonfiguration op.\n" +"Specielt er det nok, hvis PPD-filen ikke indeholder en\n" +"'cupsFilter'-indgang, da en sådan ville henvise til en\n" +"printerdriver. \n" +"" #. A caption to make Firewall settings to allow remote access to CUPS: #: src/sharing.ycp:205 msgid "Firewall Settings" -msgstr "" +msgstr "Firewall-indstillinger" #. Label when not the Suse Firewall but another firewall is used: #: src/sharing.ycp:820 msgid "Not the Suse Firewall but another firewall is used" -msgstr "" +msgstr "Ikke Suse-Firewall men en anden firewall bruges" #. Label when the Suse Firewall is not running: #: src/sharing.ycp:837 -#, fuzzy msgid "The Suse Firewall is not active" -msgstr "Serveren '%1' er ikke tilgængelig." +msgstr "Suse-Firewall er ikke aktiv" #. CheckBox whether or not the Suse Firewall allows CUPS access from the INT zone: #: src/sharing.ycp:855 -#, fuzzy msgid "Allow access from the internal network zone" -msgstr "Tillad ekstern adgang fra disse IP-adresser eller &netværk/netmaske" +msgstr "Tillad adgang fra den interne netværkszone" #. Label when the Suse Firewall does not potect the internal network zone #. which means that CUPS access from the INT zone is allowed: #: src/sharing.ycp:868 msgid "Access from the internal network zone is allowed" -msgstr "" +msgstr "Adgang fra den interne netværkszone tillades" #. CheckBox whether or not the Suse Firewall denies CUPS access from the EXT zone: #: src/sharing.ycp:879 msgid "Deny access from the external network zone" -msgstr "" +msgstr "Nægt adgang fra den eksterne netværkszone" #. Label when the Suse Firewall denies CUPS access from the external network zone: #: src/sharing.ycp:892 msgid "Access from the external network zone is denied" -msgstr "" +msgstr "Adgang fra den eksterne netværkszone nægtes" -- To unsubscribe, e-mail: opensuse-da+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-da+help(a)opensuse.org

2 2

[opensuse-da] yast - add-on-creator.da.po
by Jan Madsen 02 Nov '08

02 Nov '08

#. label of content file key #: src/AddOnCreator.ycp:138 msgid "Content file style" -msgstr "" +msgstr "Stil på indholdsfil" #. help text for content file CONTENTSTYLE key #: src/AddOnCreator.ycp:140 -#, fuzzy msgid "Must be the first tag of the content file" -msgstr "Skriv indholdsfilen" +msgstr "Skal være indholdsfilens første mærke" #. help text for content file 'NAME' key #: src/AddOnCreator.ycp:149 msgid "For internal usage. Same restrictions as for package names apply." -msgstr "" +msgstr "Til intern brug. Samme restriktioner som for anvendelse af pakkenavne." #. label of content file BASEARCHS key #: src/AddOnCreator.ycp:155 -#, fuzzy msgid "Product architectures" -msgstr "Tilladte arkitekturer" +msgstr "Produktarkitekturer" #. help text for content file 'BASEARCHS' key #: src/AddOnCreator.ycp:157 -#, fuzzy msgid "Space-separated list of product architectures for. Matches the available product-release packages architectures. " -msgstr "Mellemrums-adskilt liste over tilladte arkitekturer for <tt>base</tt>." +msgstr "Mellemrumsadskilt liste over produktarkitekturer. Matcher de tilgængelige pakkearkitekturers produktudgivelser." #. label of content file key #: src/AddOnCreator.ycp:172 -#, fuzzy msgid "Distribution name" -msgstr "Distributions-ID" +msgstr "Navn på distribution" #. help text for content file 'DISTRIBUTION' key #: src/AddOnCreator.ycp:174 msgid "Some string denoting the distribution. The same string is most probably used in the .rpms to denote the distribution. Usually a composition of the name, version and architecture." -msgstr "" +msgstr "En streng betegner distributionen. Den samme streng bruges sikkert også i .rpm'erne til at betegne distributionen. Normalt en sammensætning af navn, version og arkitektur." #. label for 'Ext' pattern key #: src/AddOnCreator.ycp:562 msgid "Extends" -msgstr "" +msgstr "Udvider" #. label for 'Inc' pattern key #: src/AddOnCreator.ycp:568 msgid "Includes" -msgstr "" +msgstr "Inkluderer" #. label for 'Exnh pattern key #: src/AddOnCreator.ycp:574 -#, fuzzy msgid "Enhanced patterns" -msgstr "Udvidede resolvables" +msgstr "Forbedrede mønstre" #. label for 'Pcn' pattern key #: src/AddOnCreator.ycp:580 -#, fuzzy msgid "Conflicting packages" -msgstr "Konfliktende mønstre" +msgstr "Konfliktende pakker" #. label for 'Pob' pattern key #: src/AddOnCreator.ycp:586 -#, fuzzy msgid "Obsolete packages" -msgstr "Foreslåede pakker" +msgstr "Forældede pakker" #. label for 'Pfr' pattern key #: src/AddOnCreator.ycp:592 -#, fuzzy msgid "Freshened packages" -msgstr "Anbefalede pakker" +msgstr "Genopfriskede pakker" # #. label for 'Psp' pattern key #: src/AddOnCreator.ycp:598 -#, fuzzy msgid "Supplemented packages" -msgstr "Supplerende mønstre" +msgstr "Supplerende pakker" #. label for 'Pen' pattern key #: src/AddOnCreator.ycp:604 -#, fuzzy msgid "Enhanced packages" -msgstr "Udvidede resolvables" +msgstr "Forbedrede pakker" #. table item label #: src/AddOnCreator.ycp:754 msgid "The release number" -msgstr "" +msgstr "Udgivelsesnummer" #. table item label #: src/AddOnCreator.ycp:759 -#, fuzzy msgid "The URL for release notes rpm" -msgstr "URL for udgivelsesbeskeder" +msgstr "URL for udgivelsesnoter-rpm" #. table item label #: src/AddOnCreator.ycp:764 -#, fuzzy msgid "Product description" -msgstr "Beskrivelse" +msgstr "Produktbeskrivelse" #. table item label #: src/AddOnCreator.ycp:769 -#, fuzzy msgid "Product summary" -msgstr "Produktnavn" +msgstr "Produktsammendrag" # Write dialog help 1/2 #. help text #: src/AddOnCreator.ycp:1496 -#, fuzzy msgid "Wait while generating data for add-on... \n" -msgstr "" -"Opretter data for tillæg \n" -"Vent venligst...\n" +msgstr "Vent mens data genereres for tillæg... \n" #: src/AddOnCreator.ycp:2770 -#, fuzzy, ycp-format +#, ycp-format msgid "" "Enter passphrase for GPG key %1\n" "(%2)" -msgstr "Adgangsfrase for GPG nøgle %1" +msgstr "" +"Angiv adgangsfrase for GPG nøglen %1\n" +"(%2)" #. command line message, do not translate 'create', 'clone' #: src/add-on-creator.ycp:469 -#, fuzzy msgid "There is no add-on product configuration present. Create a new one using the 'create' or 'clone' commands." -msgstr "Der er ingen konfiguration af tillægsprodukt til stede. Opret en ny ved at bruge kommandoerne 'create' eller 'clone'." +msgstr "Der er ingen konfiguration af tillægsprodukt til stede. Opret en ny med kommandoerne 'create' eller 'clone'." #. error message #: src/add-on-creator.ycp:480 -#, fuzzy msgid "Specify the add-on product that should be built." -msgstr "Specificér tillægsproduktet der skal oprettes." +msgstr "Specificér tillægsproduktet, der skal oprettes." #. error message #: src/add-on-creator.ycp:522 -#, fuzzy msgid "Specify the add-on product configuration that should be deleted." -msgstr "Specificér tillægsprodukt konfiguration der skal slettes." +msgstr "Angiv tillægsproduktets konfiguration, der skal slettes." #. command line help text for 'create' action #: src/add-on-creator.ycp:541 -#, fuzzy msgid "Create and build a new add-on product." -msgstr "Opret et nyt tillægsprodukt" +msgstr "Opret og byg et nyt tillægsprodukt" #. command line help text for 'clone' action #: src/add-on-creator.ycp:546 -#, fuzzy msgid "Create and build a new add-on product based on an existing one." -msgstr "Opret et tillægsprodukt baseret på et eksisterende" +msgstr "Opret og byg et nyt tillægsprodukt baseret på et eksisterende." #. command line help text for 'list' action #: src/add-on-creator.ycp:556 -#, fuzzy msgid "List available add-on product configurations." -msgstr "Liste tilgængelige tillægsprodukt konfigurationer" +msgstr "Vis liste over tilgængelige tillægsprodukters konfigurationer." #. command line help text for 'create' action #: src/add-on-creator.ycp:561 -#, fuzzy msgid "Build an add-on product from the selected configuration." -msgstr "Opret tillægsprodukt fra den valgte konfiguration" +msgstr "Opret et tillægsprodukt fra den valgte konfiguration." #. command line help text for 'create' action #: src/add-on-creator.ycp:566 -#, fuzzy msgid "Delete the selected add-on product configuration." -msgstr "Slet den valgte tillægsprodukt konfiguration" +msgstr "Slet det valgte tillægsprodukts konfiguration" #. help text for 'number' option; do not translate 'list' #: src/add-on-creator.ycp:682 -#, fuzzy msgid "Number of the selected add-on (see 'list' command for product numbers)." -msgstr "Antal af valgte tillæg (se kommandolisten for produkt numre)" +msgstr "Antal af valgte tillæg (se kommandoen 'list' for produktnumre)" #. command line help text for 'changelog' option #: src/add-on-creator.ycp:687 -#, fuzzy msgid "Generate a Changelog file." -msgstr "Generér fil med ændringslog" +msgstr "Generér en changelog-fil" #. help text #: src/complex.ycp:145 -#, fuzzy msgid "Start creating a new add-on product configuration with Add." -msgstr "Start oprettelse af ny tillægsprodukt konfiguration med Tilføj." +msgstr "Start oprettelse af en ny tillægsproduktkonfiguration med Tilføj." #. help text #: src/complex.ycp:148 -#, fuzzy msgid "Use Edit to modify the selected add-on product configuration." msgstr "Brug Redigér for at ændre det valgte tillægsprodukts konfiguration." #. help text #: src/complex.ycp:154 -#, fuzzy msgid "Build the fresh add-on product based on the selected configuration with Build." -msgstr "opret et frisk tillægsprodukt baseret på den valgte konfiguration med Opret." +msgstr "Opret det nye tillægsprodukt baseret på den valgte konfiguration med Opret." #. radio button label #: src/complex.ycp:414 -#, fuzzy msgid "SUSE &Linux Enterprise Server 11" -msgstr "SUSE &Linux Enterprise Server 10 SP1" +msgstr "SUSE &Linux Enterprise Server 11" #. radio button label #: src/complex.ycp:418 -#, fuzzy msgid "SUSE L&inux Enterprise Desktop 11" -msgstr "SUSE L&inux Enterprise Desktop 10 SP1" +msgstr "SUSE L&inux Enterprise Desktop 11" #. radio button label #: src/complex.ycp:422 -#, fuzzy msgid "S&USE Linux Enterprise 11" -msgstr "S&USE Linux Enterprise 10 SP1" +msgstr "S&USE Linux Enterprise 11" #. radio button label #: src/complex.ycp:426 -#, fuzzy msgid "OpenSUSE &11.1" -msgstr "OpenSUSE &11.0" +msgstr "OpenSUSE &11.1" #. error popup (input validation failed) #: src/complex.ycp:596 -#, fuzzy msgid "" "The value of NAME may contain only\n" "letters, numbers, and the characters \".~_-\"." msgstr "" -"Værdien for DISTPRODUCT må kun indeholde\n" +"Værdien for NAME må kun indeholde\n" "bogstaver, tal og tegnene \".~_-\"." #. #. `RadioButtonGroup (`id(`rd), `Left(`VBox ( #. `Left (`RadioButton(`id("ARCH"), `opt (`notify),_("&ARCH"),true)), #. allowed_archs == [] ? `VSpacing (0) : #. `HBox ( #. `HSpacing (), #. // combo label #. `Left (`ComboBox (`id(`base), _("&Base Architecture"), #. allowed_archs)) #. ), #. `Left (`RadioButton (`id("LABEL"), `opt (`notify), _("&LABEL"))), #. `HBox ( #. `HSpacing (), #. // combo label #. `Left (`ComboBox (`id(`lang), _("La&nguage Code"), #. allowed_langs)) #. ) #. ))), #. #: src/complex.ycp:642 -#, fuzzy msgid "LABEL" -msgstr "&ETIKET" +msgstr "ETIKET" #. dialog caption - 'content' is file name #: src/complex.ycp:715 -#, fuzzy msgid "Product Definition" -msgstr "Produktdefinition (indholdsfil)" +msgstr "Produktdefinition" #. label #: src/complex.ycp:753 -#, fuzzy msgid "content File" -msgstr "Søgesti til indholdsfil" +msgstr "indholdsfil" #. label #: src/complex.ycp:777 -#, fuzzy msgid "Product File" -msgstr "Produktnavn" +msgstr "Produktfil" # Write dialog help 1/2 #. Write dialog help #: src/helps.ycp:45 -#, fuzzy msgid "" "Writing the add-on configurations \n" "Please wait... \n" msgstr "" -"Skriver tillæggets konfiguration \n" +"Skriver tillægskonfigurationerne \n" -- To unsubscribe, e-mail: opensuse-da+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-da+help(a)opensuse.org

2 2

[opensuse-da] yast - dns-server.da.po
by Jan Madsen 02 Nov '08

02 Nov '08

#. progress stage #: src/DnsServer.pm:1221 msgid "Call netconfig" -msgstr "" +msgstr "Kald netconfig" #. progress step #: src/DnsServer.pm:1237 msgid "Calling netconfig..." -msgstr "" +msgstr "Kalder netconfig..." # #: src/DnsServer.pm:1429 -#, fuzzy msgid "" "Error occurred while calling netconfig.\n" "Error: " msgstr "" -"Der opstod en fejl under opstart af 'named'-tjenesten.\n" +"En fejl opstod under opkald af netconfig.\n" "Fejl: " #: src/dialog-main.ycp:221 msgid "Netconfig DNS policy" -msgstr "" +msgstr "Netconfig DNS-politik" # #: src/dialog-main.ycp:227 -#, fuzzy msgid "Custom policy" -msgstr "Tilpasset" +msgstr "Tilpasset politik" # #. frame label #: src/dialog-main.ycp:1413 -#, fuzzy msgid "Add New Zone " -msgstr "T&ilføj ny zone" +msgstr "Tilføj ny zone " #. check box #: src/dialog-masterzone.ycp:136 msgid "A&utomatically Generate Records From" -msgstr "" +msgstr "Generér automatisk registre fra" # #: src/dialog-masterzone.ycp:140 -#, fuzzy msgid "Zon&e" -msgstr "Zone" +msgstr "Zon&e" #. frame label #: src/dialog-masterzone.ycp:149 msgid "Connected Reverse Zones" -msgstr "" +msgstr "Tilsluttede omvendte zoner" # #. Textentry - zone settings - Record Name #: src/dialog-masterzone.ycp:995 -#, fuzzy msgid "&Service" -msgstr "&Navneserver" +msgstr "Tjene&ste" #. Textentry - zone settings - Record Name #: src/dialog-masterzone.ycp:1004 msgid "&Protocol" -msgstr "" +msgstr "&Protokol" #. IntField - zone settings - Record Value #: src/dialog-masterzone.ycp:1022 msgid "&Weight" -msgstr "" +msgstr "&Vægt" # #. IntField - zone settings - Record Value #: src/dialog-masterzone.ycp:1024 -#, fuzzy msgid "&Port" -msgstr "&Prioritet" +msgstr "&Port" #: src/dialog-masterzone.ycp:1064 -#, fuzzy msgid "A: IPv4 Domain Name Translation" -msgstr "A: Oversættelse af domænenavn" +msgstr "A: Oversættelse af IPv4-domænenavn" #: src/dialog-masterzone.ycp:1065 -#, fuzzy msgid "AAAA: IPv6 Domain Name Translation" -msgstr "A: Oversættelse af domænenavn" +msgstr "AAAA: Oversættelse af IPv6-domænenavn" #: src/dialog-masterzone.ycp:1070 msgid "SRV: Services Record" -msgstr "" +msgstr "SRV: Tjenesteregistre" #: src/dialog-masterzone.ycp:1071 msgid "TXT: Text Record" -msgstr "" +msgstr "TXT: Tekstregistre" #: src/dialog-masterzone.ycp:1419 msgid "" "Invalid IPv6 reverse IP.\n" "\n" "IPv6 reverse records are supported either in the full form (*.ip6.arpa.)\n" "or in the relative form to the current zone." msgstr "" +"Ugyldig IPv6 omvendt IP.\n" +"\n" +"IPv6 omvendte registre understøttes enten i det fulde format (*.ip6.arpa.)\n" +"eller i det relative format til den aktuelle zone." # #: src/dialog-masterzone.ycp:1449 -#, fuzzy msgid "Invalid IPv6 address." -msgstr "%1 er ikke en gyldig IPv4-adresse." +msgstr "Ugyldig IPv6-adresse." #: src/dialog-masterzone.ycp:1473 msgid "Invalid TXT record key. It should be similar to a hostname." -msgstr "" +msgstr "Ugyldig TXT registernøgle. Det burde ligne et værtsnavn." #. TRANSLATORS: Error message, %1 is replaced with the maximal length #. %2 with the current length of a new TXT record. #: src/dialog-masterzone.ycp:1480 #, ycp-format msgid "" "Maximal length of a TXT record is %1 characters.\n" "This message is %2 characters long." msgstr "" +"Maksimal længde af et TXT-register er %1 tegn.\n" +"Denne besked er %2 tegn lang." #: src/dialog-masterzone.ycp:1975 msgid "At least one NS server must be set." -msgstr "" +msgstr "Mindst én NS-server skal sættes." #. warning message, %1 is replaced with a zone name #. #. Automatically Generate Records From is a feature that makes YaST to generate #. DNS records manually from selected zone #: src/dialog-masterzone.ycp:2022 #, ycp-format msgid "" "Current zone records are automatically generated from %1 zone.\n" "To change records manualy disable the Automatically Generate Records >From feature." msgstr "" +"Aktuelle zoneregistre genereres automatisk fra zonen %1.\n" +"Deaktivér 'Generér automatisk registre' fra funktionen for at ændre registre." #. Expert Mode Configuration - Forwarders 1/3 #: src/helps.ycp:195 msgid "" "<big>Forwarders</big> \n" "Forwarders are DNS servers to which your DNS server should send queries\n" "it cannot answer.\n" msgstr "" +"<big>Videresendere</big> \n" +"Videresendere er DNS-servere, til hvilke din DNS-server skal sende de\n" +"forespørgsler, den ikke kan svare.\n" #. Expert Mode Configuration - Zones #2 #: src/helps.ycp:285 msgid "" "To add a new zone, enter its Zone Name, select the Zone Type,\n" "and click Add.\n" msgstr "" +"Tilføj en ny zone ved at angive dets Zonenavn, vælg dens Zonetype,\n" +"og tryk på Tilføj.\n" #. Expert Mode Configuration - Zones #3 #: src/helps.ycp:290 -#, fuzzy msgid "" "To add a new IPv4 reverse zone, enter a part of the reverse IPv4 address followed by\n" "<tt>.in-addr.arpa</tt> as its Zone Name (for example, zone name\n" "<tt>0.168.192.in-addr.arpa</tt> for network <tt>192.168.0.0/24</tt>), select\n" "the Zone Type, and click Add.\n" msgstr "" -"For at tilføje en ny zone, angiv dens Zonenavn, vælg Zonetype\n" -"og klik Tilføj. \n" -"For at tilføje en omvendt zone, angiv en del af en omvendt IP-adresse efterfulgt af\n" +"For at tilføje en ny IPv4 omvendt zone, angiv en del af den omvendte IPv4-adresse efterfulgt af\n" "<tt>.in-addr.arpa</tt> som dens Zonenavn (f.eks. zonenavn\n" "<tt>0.168.192.in-addr.arpa</tt> for netværket <tt>192.168.0.0/24</tt>), vælg\n" -"Zonetype og klik Tilføj.\n" +"Zonetype og tryk på Tilføj.\n" #. Expert Mode Configuration - Zones #4 #: src/helps.ycp:297 msgid "" "To add a new IPv6 reverse zone, enter a part of the reverse IPv6 address followed by\n" "<tt>.ip6.arpa</tt> as its Zone Name. Several formats for entering the zone name are\n" "supported: Standard form: <tt>4.5.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa.</tt>;\n" "Forward form: <tt>2001:db8:0:54::/64</tt>;\n" "Forward form without netmask bits: <tt>2001:db8:0:54::</tt>\n" "(default <tt>64</tt> netmask bits are used).\n" msgstr "" +"For at tilføje en ny IPv6 omvendt zone, angiv en del af den omvendte IPv6-adresse efterfulgt\n" +"af <tt>.ip6.arpa</tt> som dens Zonenavn. Der understøttes flere formater for angivelse\n" +"af zonenavn: Standardformat: <tt>4.5.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa.</tt>;\n" +"Videresendelsesformat: <tt>2001:db8:0:54::/64</tt>;\n" +"Videresendelsesformat uden netmaskebits: <tt>2001:db8:0:54::</tt>\n" +"(som standard bruges <tt>64</tt> netmaskebits).\n"

2 2

[opensuse-da] yast - product-creator.da.po
by Jan Madsen 02 Nov '08

02 Nov '08

# #. label #: src/Kiwi.ycp:420 msgid "Preparing for Image Creation" -msgstr "Forbereder oprettelse af imagefil" +msgstr "Forbereder til oprettelse af imagefil" #. error message: %1 and %2 are architecture names like i386, x86_64, ppc... #: src/complex.ycp:74 #, ycp-format msgid "" "Target architecture of the current configuration (%1)\n" "does not match the system architecture (%2).\n" "\n" "Kiwi cannot create images for different architectures." msgstr "" +"Målarkitekturen af den nuværende konfiguration (%1)\n" +"matcher systemets arkitektur (%2).\n" +"\n" +"Kiwi kan ikke oprette imagefiler til forskellige arkitekturer." #. push button label #: src/complex.ycp:115 -#, fuzzy msgid "&Create Product" -msgstr "Produkt" +msgstr "&Opret produkt" #. label #: src/complex.ycp:298 msgid "Disable signature checks in linuxrc" -msgstr "" +msgstr "Deaktivér signaturtjek i linuxrc" #. progressbar label #: src/complex.ycp:300 msgid "Disabling signature checks in linuxrc..." -msgstr "" +msgstr "Deaktiverer signaturtjek i linuxrc..." # translators: progress stage 1/1 #. yes/no popup #: src/complex.ycp:718 -#, fuzzy, ycp-format +#, ycp-format msgid "Delete configutation %1 (%2) now?" -msgstr "Slet konfigurationen %1 nu? " +msgstr "Slet konfigurationen %1 (%2) nu? " #: src/dialogs.ycp:469 msgid "Target Architecture" -msgstr "" +msgstr "Målarkitektur" #: src/dialogs.ycp:576 #, ycp-format msgid "" "Source %1\n" "does not support the current target architecture (%2).\n" "Change the target architecture?\n" msgstr "" +"Kilden %1\n" +"understøtter ikke den nuværende målarkitektur (%2).\n" +"Vil du ændre målarkitekturen?\n" #: src/dialogs.ycp:619 #, ycp-format msgid "Target architecture: %1" -msgstr "" +msgstr "Målarkitektur: %1" #: src/dialogs.ycp:699 src/dialogs.ycp:852 #, ycp-format msgid "Target Architecture: %1" -msgstr "" +msgstr "Målarkitektur: %1" #. error message #: src/dialogs.ycp:794 msgid "" "There is a mismatch between the selected\n" "repositories and the machine architecture.\n" "\n" "Either select another repositories or\n" "change the target architecture." msgstr "" +"Der er en uoverensstemmelse mellem de valgte\n" +"softwarekilder og maskinarkitekturen.\n" +"\n" +"Vælg en anden softwarekilde, eller ændr\n" +"målarkitekturen." #: src/dialogs.ycp:839 msgid "Select the new target architecture." -msgstr "" +msgstr "Vælg den nye målarkitektur" #: src/dialogs.ycp:1702 msgid "Architecture" -msgstr "" +msgstr "Arkitektur" #. summary line, %1 is e.g. i386, x86_64, ppc... #: src/dialogs.ycp:1705 #, ycp-format msgid "Target architectrure: %1" -msgstr "" +msgstr "Målarkitektur: %1" # Ovreview dialog help 1/3 #. Ovreview dialog help 1/3 #: src/helps.ycp:52 -#, fuzzy msgid "" "<big>Product Creator Configuration Overview</big> \n" "Obtain an overview of available configurations. Additionally\n" "edit those configurations. \n" msgstr "" "<big>Konfigurationsoversigt for produktopretter</big> \n" "Få en oversigt over tilgængelige konfigurationer. Endvidere\n" "kan du redigere disse konfigurationer. \n" #. overview dialog help part 4 #: src/helps.ycp:68 -#, fuzzy msgid "Use Create Product to create the ISO image or installation repository directory with selected product." -msgstr "" -"Anvend Opret imagefil for at oprette ISO-imagefilen eller mappe\n" -"med dit konfigurerede produkt." +msgstr "Brug Opret produkt til at oprette ISO-imagefilen eller mappe til installationskilden med det valgte produkt." #. Source selection help 2/2 #: src/helps.ycp:99 msgid "" "<big>Target Architecture</big> \n" "It is possible to create a product for different architecture than the architecture of this machine.\n" "All selected repositories must support the target architecture. \n" "Note: KIWI does not support different architectures yet, do not change the\n" "architecture if you intend to create a KIWI image from the current configuration.\n" msgstr "" +"<big>Målarkitektur</big> \n" +"Det er muligt at oprette et produkt til andre arkitekturer end denne maskines arkitektur.\n" +"Alle valgte softwarekilder skal understøtte målarkitekturen. \n" +"Bemærk: KIWI understøtter endnu ikke andre arkitekturer. Ændr ikke\n" +"arkitekturen, hvis du vil oprette et KIWI-image fra den nuværende konfiguration.\n" #. help text - the base selection dialog 2/4 #: src/helps.ycp:130 -#, fuzzy msgid "" "One of the used repositories must be marked as the base product. The base\n" "product repository should be bootable to ensure the newly created product is also\n" "bootable.\n" msgstr "" -"En af de anvendte softwarekilder skal markeres som basisproduktet. Basis-\n" -"produktets softwarekilde skal være boot-bar, for at tilsikre at det nye produkt\n" -"også kan bootes." +"En af de anvendte softwarekilder skal markeres som basisproduktet.\n" +"Basisproduktets softwarekilde skal kunne bootes for at tilsikre, at det nye\n" +"produkt også kan bootes.\n" # #. text entry label #: src/kiwi_dialogs.ycp:580 -#, fuzzy msgid "Login &Name" -msgstr "&Navn" +msgstr "Login-&navn" # #. text entry label #: src/kiwi_dialogs.ycp:582 -#, fuzzy msgid "&Full Name" -msgstr "&Navn" +msgstr "&Fulde navn" #. text entry label #: src/kiwi_dialogs.ycp:588 msgid "&UID" -msgstr "" +msgstr "&UID" #. text entry label #: src/kiwi_dialogs.ycp:591 -#, fuzzy msgid "G&roup Name" -msgstr "&Gruppenavn" +msgstr "G&ruppenavn" #. text entry label #: src/kiwi_dialogs.ycp:593 msgid "&GID" -msgstr "" +msgstr "&GID" #. frame label #: src/kiwi_dialogs.ycp:1357 -#, fuzzy msgid "Locale settings" -msgstr "Skriv indstillingerne" +msgstr "Lokalitetsindstillinger" #. textentry label #: src/kiwi_dialogs.ycp:1452 -#, fuzzy msgid "Co&mpression" -msgstr "Ko&mprimér" +msgstr "Ko&mpression" #. help text #: src/kiwi_dialogs.ycp:1454 msgid "Select the value for image Compression. This will modify the flags value of the image type. Check the kiwi manual for the meaning of the available values." -msgstr "" +msgstr "Vælg værdien for imagefilens kompression. Dette vil ændre imagetypens flags-værdi. Se i Kiwi-manualen efter betydningen af de tilgængelige værdier." #. textentry label #: src/kiwi_dialogs.ycp:1708 -#, fuzzy msgid "&Locale" -msgstr "Indlæs fil" +msgstr "&Lokalitet" #. textentry label #: src/kiwi_dialogs.ycp:1717 msgid "&Keyboard layout" -msgstr "" +msgstr "Tastaturla&yout" #. textentry label #: src/kiwi_dialogs.ycp:1726 msgid "&Time zone" -msgstr "" +msgstr "&Tidszone" #. table header #: src/kiwi_dialogs.ycp:1742 -#, fuzzy msgid "Login Name" -msgstr "Konfigurations&navn:" +msgstr "Login-navn" #. table header #: src/kiwi_dialogs.ycp:1744 -#, fuzzy msgid "Full Name" -msgstr "Navn" +msgstr "Fulde navn" #. table header #: src/kiwi_dialogs.ycp:1746 msgid "UID" -msgstr "" +msgstr "UID" #. table header #: src/kiwi_dialogs.ycp:1752 msgid "GID" -msgstr "" +msgstr "GID" #. help for table with users #: src/kiwi_dialogs.ycp:1755 -#, fuzzy msgid "" "For each user, specify the Name, Password, Home Directory and group\n" "to which the users belongs.\n" msgstr "" -"For hver bruger angiv Navn, Adgangskode, Hjemmemappe samt\n" -"gruppe, som brugerne tilhører." +"Angiv Navn, Adgangskode og Hjemmemappe for hver bruger, samt\n" +"gruppen som brugerne tilhører.\n" #. help text for kiwi UI preparation, cont. #: src/kiwi_dialogs.ycp:1876 -#, fuzzy msgid "Modify the list of Package Repositories that will be used for creating the image. Use Add From System to add one of the current system repositories." -msgstr "Ændr listen over Softwarekilder som vil blive brugt til at oprette imagefilen. Benyt Tilføj fra system for at tilføje en af dit nuværende systems softwarekilder." +msgstr "Ændr listen over Softwarekilder, som vil blive brugt til at oprette imagefilen. Brug Tilføj fra system for at tilføje en af det nuværende systems softwarekilder." #. command line help text for 'create_iso' option #: src/product-creator.ycp:99 -#, fuzzy msgid "Output should be an ISO image instead of directory tree" -msgstr "Output skulle være ISO-imagefil i stedet for mappetræ" +msgstr "Output skulle være en ISO-imagefil i stedet for mappetræ"

2 2

[opensuse-da] yast - isns.da.po
by Jan Madsen 02 Nov '08

02 Nov '08

#: src/IsnsServer.ycp:118 #, ycp-format msgid "To configure the isns service, the %1 package must be installed." -msgstr "Hvis du vil konfigurere insn-tjenesten, skal %1 pakken være installeret." +msgstr "For at konfigurere insn-tjenesten, skal pakken %1 være installeret." #: src/dialogs.ycp:57 src/dialogs.ycp:159 msgid "iSCSI Nodes" -msgstr "ISCSI-noder" +msgstr "ISCSI-knuder" #: src/dialogs.ycp:75 src/dialogs.ycp:179 msgid "Discovery Domains" -msgstr "Registreringsdomæner" +msgstr "Opdagelsesdomæner" #: src/dialogs.ycp:99 src/dialogs.ycp:227 msgid "Discovery Domains Sets" -msgstr "Registreringsdomænesæt" +msgstr "Opdagelsesdomænesæt" #: src/dialogs.ycp:141 -#, fuzzy msgid "Address of iSNS Server" -msgstr "ISNS-serveradresse" +msgstr "iSNS-serveradresse" #: src/dialogs.ycp:161 src/dialogs.ycp:207 src/widgets.ycp:139 -#, fuzzy msgid "iSCSI Node Name" -msgstr "ISCSI-noder" +msgstr "iSCSI-knudenavn" #: src/dialogs.ycp:161 src/dialogs.ycp:207 src/widgets.ycp:175 msgid "Node Type" -msgstr "Nodetype" +msgstr "Knudetype" #: src/dialogs.ycp:183 src/dialogs.ycp:255 src/widgets.ycp:26 -#, fuzzy msgid "Discovery Domain Name" -msgstr "Registreringsdomænemedlemmer" +msgstr "Opdagelsesdomænenavn" #: src/dialogs.ycp:188 -#, fuzzy msgid "Create Discovery Domain" -msgstr "Registreringsdomæner" +msgstr "Opret opdagelsesdomæne" #: src/dialogs.ycp:212 msgid "Add Existing iSCSI Node" -msgstr "" +msgstr "Tilføj eksisterende iSCSI-knude" #: src/dialogs.ycp:213 msgid "Create iSCSI Node Member" -msgstr "" +msgstr "Opret iSCSI knudemedlem" #: src/dialogs.ycp:231 src/widgets.ycp:109 -#, fuzzy msgid "Discovery Domain Set Name" -msgstr "Registreringsdomænesæt" +msgstr "Navn på opdagelsesdomænesæt" #: src/dialogs.ycp:236 -#, fuzzy msgid "Create Discovery Domain Set" -msgstr "Registreringsdomænesæt" +msgstr "Opret opdagelsesdomænesæt" #: src/dialogs.ycp:251 -#, fuzzy msgid "Discovery Domain Set Members" -msgstr "Registreringsdomænemedlemmer" +msgstr "Medlemmer af opdagelsesdomænesæt" #: src/dialogs.ycp:260 src/widgets.ycp:223 msgid "Add Discovery Domain" -msgstr "Tilføj registreringsdomæne" +msgstr "Tilføj opdagelsesdomæne" #: src/dialogs.ycp:279 -#, fuzzy msgid "iSNS Service" -msgstr "Tjeneste" +msgstr "iSNS-tjeneste" #: src/dialogs.ycp:287 -#, fuzzy msgid "<h1>iSNS Service</h1>" -msgstr "<h1>isns-tjeneste</h1>" +msgstr "<h1>iSNS-tjeneste</h1>" #. Read dialog help 1/2 #: src/helps.ycp:20 -#, fuzzy msgid "" "<big>Initializing iSNS daemon configuration</big> \n" "Please wait... \n" msgstr "" -"<big>Initialiserer konfiguration af isns-tjeneste</big> \n" -"Vent et øjeblik... \n" +"<big>Initialiserer konfiguration af iSNS-dæmon</big> \n" +"Vent venligst... \n" #. Write dialog help 1/2 #: src/helps.ycp:30 -#, fuzzy msgid "" "<big>Saving iSNS Configuration</big> \n" "Please wait... \n" msgstr "" -"<big>Gemmer isns-konfiguration</big> \n" -"Vent et øjeblik... \n" +"<big>Gemmer iSNS-konfiguration</big> \n" +"Vent venligst... \n" #. Summary dialog help 1/3 #: src/helps.ycp:42 -#, fuzzy msgid "" "<big>iSNS Configuration</big> \n" "Configure an iSNS server here. \n" msgstr "" -"<big>isns-konfiguration</big> \n" -"Konfigurer en isns-server her. \n" +"<big>iSNS-konfiguration</big> \n" +"Konfigurér en iSNS-server her. \n" #: src/helps.ycp:46 msgid "<big>iSNS Server location</big> The DNS name or the ip address of the iSNS service can be entered for the iSNS address.\n" -msgstr "" +msgstr "<big>iSNS-servers placering</big> DNS-navnet eller IP-adressen på iSNS-tjenesten kan angives for iSNS-adressen.\n" #: src/helps.ycp:50 msgid "The list of all available iSCSI nodes registered with the iSNS service are displayed. Nodes are registered by iSCSI initiators and iSCSI targets. It is only possible to delete them. Deleting a node removes it from the iSNS database." -msgstr "" +msgstr "Listen over alle tilgængelige iSCSI-knuder registreret med iSNS-tjenesten vises. Knuder registreres af iSCSI-igangsætter og iSCSI-mål. Det er kun muligt at slette dem. At slette en knude fjerner den fra iSNS-databasen." #: src/helps.ycp:54 msgid "A list of all discovery domains are displayed. For discovery domains, it is possible to Create a discovery domain and Delete them. Deleting a domain removes the members from the domain but does not delete the iSCSI node members " -msgstr "" +msgstr "En liste over alle opdagelsesdomæner vises. For opdagelsesdomæner er det muligt at oprette et opdagelsesdomæne og slette dem. At slette et domæne fjerner medlemmerne fra domænet, men sletter ikke medlemmerne af iSCSI-knuden " #: src/helps.ycp:57 msgid "A list of all iSCSI nodes are displayed by discovery domain. Selecting another discovery domain refreshes the list with members from that discovery domain. It is possible to Add an iSCSI node to a discovery domain or Delete thenode. Deleting a node removes it from the domain but does not delete the iSCSI node Creating a iSCSI node allows a not yet registered node to be added as a member of the discovery domain. When the initiator or target registers this node then it becomes part of this domain When an iSCSI initiator does a discovery request, the iSNS service returns all iSCSI node targets that are members of the same Discovery Domains. " -msgstr "" +msgstr "En liste over alle iSCSI-knuder vises ved opdagelsesdomæne. At vælge et andet opdagelsesdomæne genopfrisker listen med medlemmer fra dette opdagelsesdomæne. Det er muligt at tilføje en iSCSI-knude til et opdagelsesdomæne eller at slette knuden. At slette en knude fjerner den fra domænet, men sletter ikke iSCSI-knuden At oprette en iSCSI-knude lader en registreret knude blive tilføjes som et medlem af opdagelsesdomænet. Når en igangsætter eller et mål registrerer denne knude, bliver den en del af dette domæne Når en iSCSI-igangsætter laver en opdagelsesforespørgsel, returnerer iSNS-tjenesten alle de mål for iSCSI-knuden, der er medlemmer af det samme opdagelsesdomæne. " #: src/helps.ycp:61 msgid "At the top a list of all Discovery Domain Sets are displayed. Discovery Domains belong to Discovery Domain Sets. A Discovery Domain must be a member of a Discovery Domain Set in order to be active. In an iSNS database, a Discovery Domain Set contains Discovery Domains and Discovery Domains contain iSCSI Node members." -msgstr "" +msgstr "I toppen vises en liste over alle opdagelsesdomænesæt. Opdagelsesdomæner tilhører opdagelsesdomænesæt. Et opdagelsesdomæne skal være medlem af et opdagelsesdomænesæt for at være aktiv. I en iSNS-database indeholder opdagelsesdomænesæt opdagelsesdomæner, og opdagelsesdomæner indeholder medlemmer af iSCSI-knuder." #: src/helps.ycp:64 msgid "The Discovery Domain Set Members list is refreshed whenever a different Discovery Domain Set is selected." -msgstr "" +msgstr "Listen over medlemmer af opdagelsesdomænesættet genopfriskes, hver gang et andet opdagelsesdomænesæt vælges." #. Rich text title for IsnsServer in proposals #: src/isns_proposal.ycp:65 msgid "iSCSI Initiator" -msgstr "" +msgstr "iSCSI-igangsætter" #. Menu title for IsnsServer in proposals #: src/isns_proposal.ycp:67 msgid "&iSCSI Initiator" -msgstr "" +msgstr "&iSCSI-igangsætter" #: src/widgets.ycp:31 msgid "Select Discovery Domain Set to which Discovery Domain will be added." -msgstr "" +msgstr "Vælg opdagelsesdomænesæt, til hvilket opdagelsesdomænet tilføjes." #: src/widgets.ycp:32 -#, fuzzy msgid "Discovery Domain Name Set" -msgstr "Registreringsdomænesæt" +msgstr "Opdagelsesdomænenavnesæt" #: src/widgets.ycp:168 msgid "Add iSCSI node to Discovery Domain" -msgstr "Føj iSCSI-node til opdagelsesdomæne" +msgstr "Føj iSCSI-knude til opdagelsesdomæne" #: src/widgets.ycp:171 msgid "Available Nodes to Add" -msgstr "" +msgstr "Tilgængelige knuder at tilføje" #: src/widgets.ycp:180 msgid "Add Node" -msgstr "Tilføj node" +msgstr "Tilføj knude" #: src/widgets.ycp:211 -#, fuzzy msgid "Add Discovery Domain to Set" -msgstr "Tilføj registreringsdomæne" +msgstr "Føj opdagelsesdomæne til sæt" #: src/widgets.ycp:214 -#, fuzzy msgid "Avaliable Discovery Domains" -msgstr "Registreringsdomæner" +msgstr "Tilgængelige opdagelsesdomæner" #: src/widgets.ycp:257 src/widgets.ycp:272 msgid "Target or Initiator" -msgstr "" +msgstr "Mål eller igangsætter" #: src/widgets.ycp:475 -#, fuzzy msgid "Really delete this domain?" -msgstr "Virkelig slette det valgte element?" +msgstr "Vil du virkelig slette dette domæne?" #. boolean display = true; #. Report::DisplayErrors(display,10); #: src/widgets.ycp:619 msgid "Unable to connection to iSNS server. Check iSNS server address" -msgstr "" +msgstr "Kunne ikke slutte til iSNS-server. Tjek iSNS-serverens adresse"

2 2

[opensuse-da] korrekt: lcn - kde4-openSUSE
by Martin Schlander 01 Nov '08

01 Nov '08

#: ViewManager.cpp:211 -#, fuzzy, kde-format +#, kde-format msgid "Switch to Tab %1" -msgstr "Skift til skærm 1" +msgstr "Skift til faneblad %1" #: ViewManager.cpp:907 msgid "Unable to restore saved tabs. Possibly unsupported KDE 3 session data." -msgstr "" +msgstr "Kan ikke gendanne gemte faneblade. Muligvis ikke-understøttet KDE 3 sessionsdata." #: folderview.cpp:429 -#, fuzzy msgctxt "Sort Icons" msgid "Unsorted" -msgstr "ikke-supporteret" +msgstr "Usorteret" #: folderview.cpp:435 -#, fuzzy msgid "Top to Bottom" -msgstr "~Top til bund (sorter rækker)" +msgstr "Top til bund" #: folderview.cpp:436 -#, fuzzy msgid "Left to Right" -msgstr "Til højre" +msgstr "Venstre til højre" # /opt/kde3/share/services/searchproviders/php.desktop #: folderview.cpp:1525 -#, fuzzy msgid "Desktop Folder" -msgstr "Skrivebordssøgning" +msgstr "Desktop-mappen" #: folderview.cpp:1582 -#, fuzzy msgid "&Refresh Desktop" -msgstr "Fjernadgang til skrivebord" +msgstr "Genopf&risk desktop" #: folderview.cpp:1582 -#, fuzzy msgid "&Refresh View" -msgstr "&Genopfrisk" +msgstr "Genopf&risk visning" #: folderview.cpp:1615 msgid "Align to Grid" -msgstr "" +msgstr "Justér efter gitter" #: folderview.cpp:1620 -#, fuzzy msgctxt "Icons on the desktop" msgid "Lock in Place" -msgstr "_Låsefil:" +msgstr "Lås på stedet" #: folderview.cpp:1627 -#, fuzzy msgctxt "Sort icons" msgid "By Name" -msgstr "Navn" +msgstr "Efter navn" #: folderview.cpp:1628 -#, fuzzy msgctxt "Sort icons" msgid "By Size" -msgstr "WEB-nøglestørrelse" +msgstr "Efter størrelse" #: folderview.cpp:1629 -#, fuzzy msgctxt "Sort icons" msgid "By Type" -msgstr "Type" +msgstr "Efter type" #: folderview.cpp:1630 msgctxt "Sort icons" msgid "By Date" -msgstr "" +msgstr "Efter dato" #: folderview.cpp:1636 -#, fuzzy msgctxt "Sort icons" msgid "Directories First" -msgstr "Mappe: " +msgstr "Mapper først" #: folderview.cpp:1641 -#, fuzzy msgid "Sort Icons" -msgstr "Desktop-ikoner" +msgstr "Sortér ikoner" #. #-#-#-#-# kdebase4.spec.po #-#-#-#-#. i18n: file: folderviewDisplayConfig.ui:27 #. i18n: ectx: property (text), widget (QLabel, lblCustomLabel) #. #-#-#-#-# quickaccess.po #-#-#-#-#. i18n: file: quickaccessConfig.ui:307 #. i18n: ectx: property (text), widget (QLabel, customLabel) #: rc.cpp:6 rc.cpp:69 -#, fuzzy msgid "Label:" -msgstr "Mærkat " +msgstr "Etiket:" #. i18n: file: folderviewDisplayConfig.ui:42 #. i18n: ectx: property (whatsThis), widget (KLineEdit, labelEdit) #: rc.cpp:9 msgid "" "This edit field contains the label which is shown at the top of the applet. \n" "\n" "By default it contains the name of the place being shown in the applet, but if you prefer to have a custom label you can enter it here." -msgstr "" +msgstr "Dette redigeringsfelt indeholder etiketten som vises øverst i appletten.\n \n Som standard indeholder den navnet på stedet, som vises i appletten, men hvis du foretrækker en brugerdefineret etiket, kan du angive den her." #. i18n: file: folderviewDisplayConfig.ui:51 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_2) #: rc.cpp:14 -#, fuzzy msgid "Icon Settings" -msgstr "IP-opsætning" +msgstr "Ikonopsætning" #. #-#-#-#-# kdebase4.spec.po #-#-#-#-#. i18n: file: folderviewDisplayConfig.ui:60 #. i18n: ectx: property (text), widget (QLabel, label_4) #. #-#-#-#-# quickaccess.po #-#-#-#-#. i18n: file: quickaccessConfig.ui:199 #. i18n: ectx: property (text), widget (QLabel, label) #: rc.cpp:17 rc.cpp:33 -#, fuzzy msgid "Icon size:" msgstr "Ikonstørrelse:" #. i18n: file: folderviewDisplayConfig.ui:98 #. i18n: ectx: property (whatsThis), widget (QSlider, sizeSlider) #: rc.cpp:23 msgid "Use this slider to increase or decrease the size of the icons in the view." -msgstr "" +msgstr "Brug denne skydeknap til at øge eller mindske størrelsen på ikoner i visningen." #. i18n: file: folderviewDisplayConfig.ui:139 #. i18n: ectx: property (title), widget (QGroupBox, groupBox_3) #: rc.cpp:29 -#, fuzzy msgid "Text Settings" -msgstr "Fejlsikrede indstillinger" +msgstr "Tekstopsætning" #. i18n: file: folderviewDisplayConfig.ui:148 #. i18n: ectx: property (text), widget (QLabel, label_2) #: rc.cpp:32 -#, fuzzy msgid "Text color:" -msgstr "Tekstomridsfarve" +msgstr "Tekstfarve:" #. i18n: file: folderviewDisplayConfig.ui:163 #. i18n: ectx: property (whatsThis), widget (KColorButton, colorButton) #: rc.cpp:35 msgid "Click this button to choose the color which is used for the text labels in the view." -msgstr "" +msgstr "Tryk på denne knap for at vælge farven, som bruges til tekstetiketter i visningen." #. i18n: file: folderviewDisplayConfig.ui:188 #. i18n: ectx: property (text), widget (QLabel, label_3) #: rc.cpp:38 -#, fuzzy msgid "Number of lines:" -msgstr "Tal" +msgstr "Antal linjer:" #. i18n: file: folderviewDisplayConfig.ui:209 #. i18n: ectx: property (whatsThis), widget (QSpinBox, numLinesEdit) #: rc.cpp:41 msgid "Use this control to choose how many lines of text will be shown below the icons." -msgstr "" +msgstr "Brug denne kontrol til at vælge, hvor mange linjer tekst der skal vises under ikonerne." #. i18n: file: folderviewDisplayConfig.ui:245 #. i18n: ectx: property (whatsThis), widget (QCheckBox, drawShadows) #: rc.cpp:44 msgid "" "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n" "<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n" "p, li { white-space: pre-wrap; }\n" "</style></head><body style=\" font-family:'Bitstream Vera Sans'; font- size:8pt; font-weight:400; font-style:normal;\">\n" "Check this option if you want the text labels to cast a shadow on the background.\n" "\n" "Shadows help make the text easier to read by making it stand out more from the background.\n" "\n" "Note that with dark text colors, this option will cause the text to glow with a bright halo, instead of casting a shadow.</body></html>" msgstr "" +"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n <html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n p, li { white-space: pre-wrap; }\n </style></head><body style=\" font-family:'Bitstream Vera Sans'; font- size:8pt; font-weight:400; font-style:normal;\">\n Afkryds denne indstilling, hvis du ønsker at tekstetiketter skal kaste en skygge på baggrunden.\n \n Skygger hjælper med at gøre teksten mere letlæselig, ved at få den til at adskille sig mere fra baggrunden.\n \n Bemærk at med mørke tekstfarver, vil denne indstilling få teksten til at gløde med en lys glorie, i stedet for at kaste en " +"skygge.</body></html>" #. i18n: file: folderviewDisplayConfig.ui:248 #. i18n: ectx: property (text), widget (QCheckBox, drawShadows) #: rc.cpp:55 msgid "Show text shadows" -msgstr "" +msgstr "Vis tekstskygger" #. i18n: file: folderviewDisplayConfig.ui:258 #. i18n: ectx: property (title), widget (QGroupBox, groupBox) #: rc.cpp:58 -#, fuzzy msgid "Icon Arrangement" -msgstr "Arrangement" +msgstr "Opstilling af ikoner" #. i18n: file: folderviewDisplayConfig.ui:271 #. i18n: ectx: property (text), widget (QLabel, flowLabel) #: rc.cpp:61 -#, fuzzy msgid "Arrange icons:" -msgstr "Varighed af &omflytning:" +msgstr "Opstil ikoner:" #. i18n: file: folderviewDisplayConfig.ui:284 #. i18n: ectx: property (whatsThis), widget (QComboBox, flowCombo) #: rc.cpp:64 msgid "Use this control to choose if you want the icons to be arranged top to bottom starting on the left side of the view, or arranged left to right starting at the top of the view." -msgstr "" +msgstr "Brug denne kontrol til, at vælge om du ønsker at ikonerne skal opstilles fra top til bund, begyndende fra venstre side af visningen, eller opstilles fra venstre til højre, begyndende fra toppen af visningen." #. i18n: file: folderviewDisplayConfig.ui:291 #. i18n: ectx: property (text), widget (QLabel, label) #: rc.cpp:67 -#, fuzzy msgid "Sort icons:" -msgstr "Sk&ygge for ikoner" +msgstr "Sortér ikoner:" #. i18n: file: folderviewDisplayConfig.ui:304 #. i18n: ectx: property (whatsThis), widget (QComboBox, sortCombo) #: rc.cpp:70 msgid "Use this control to choose the criteria by which the icons will be sorted in the view." -msgstr "" +msgstr "Brug denne kontrol til at vælge kriteriet, som ikonerne sorteres ud fra i visningen." #. i18n: file: folderviewDisplayConfig.ui:330 #. i18n: ectx: property (whatsThis), widget (QCheckBox, alignToGrid) #: rc.cpp:73 msgid "" "Check this option if you want the icons to be arranged in a grid.\n" "\n" "When this option is checked, icons will automatically snap to the nearest grid cell when you move them around in the view." -msgstr "" +msgstr "Afkryds denne indstilling hvis du ønsker at ikonerne skal opstilles efter et gitter.\n \n Når denne indstilling er afkrydset, vil ikoner automatisk rykke til den nærmeste gittercelle, når du flytter dem rundt i visningen." #. i18n: file: folderviewDisplayConfig.ui:333 #. i18n: ectx: property (text), widget (QCheckBox, alignToGrid) #: rc.cpp:78 msgid "Align icons in a grid" -msgstr "" +msgstr "Justér ikoner efter et gitter" #. i18n: file: folderviewDisplayConfig.ui:342 #. i18n: ectx: property (whatsThis), widget (QCheckBox, lockInPlace) #: rc.cpp:81 msgid "" "Check this option if you do not want the icons to be moveable in the view. \n" "\n" "This option is useful if you want to avoid accidentally moving the icons while interacting with them." -msgstr "" +msgstr "Afkryds denne indstilling hvis du ikke ønsker at ikonerne skal kunne flyttes i visningen.\n \n Denne indstilling er nyttig, hvis du ønsker at undgå at flytte ikonerne ved et uheld, når du interagerer med dem." #. i18n: file: folderviewDisplayConfig.ui:345 #. i18n: ectx: property (text), widget (QCheckBox, lockInPlace) #: rc.cpp:86 -#, fuzzy msgid "Lock icons in place" -msgstr "Lås ikon her" +msgstr "Lås ikoner på stedet" #. i18n: file: folderviewFilterConfig.ui:29 #. i18n: ectx: property (text), item, widget (QComboBox, filterType) #: rc.cpp:89 msgid "Show All Files" -msgstr "" +msgstr "Vis alle filer" #. i18n: file: folderviewFilterConfig.ui:34 #. i18n: ectx: property (text), item, widget (QComboBox, filterType) #: rc.cpp:92 msgid "Show Files Matching" -msgstr "" +msgstr "Vis filer som matcher" #. i18n: file: folderviewFilterConfig.ui:39 #. i18n: ectx: property (text), item, widget (QComboBox, filterType) #: rc.cpp:95 msgid "Hide Files Matching" -msgstr "" +msgstr "Skjul filer som matcher" #. i18n: file: folderviewFilterConfig.ui:157 #. i18n: ectx: property (clickMessage), widget (KLineEdit, searchMimetype) #: rc.cpp:104 -#, fuzzy msgid "Search file type" -msgstr "Søg ved fil" +msgstr "Søg efter filtype" #. i18n: file: folderviewFilterConfig.ui:167 #. i18n: ectx: property (text), widget (QLabel, fileTypesLabel) #: rc.cpp:107 -#, fuzzy msgid "File types:" -msgstr "Filsystem" +msgstr "Filtyper:" #. i18n: file: folderviewFilterConfig.ui:174 #. i18n: ectx: property (text), widget (QLabel, fileNameLabel) #: rc.cpp:110 msgid "File name pattern:" -msgstr "" +msgstr "Filnavn-mønster:" #. i18n: file: folderviewFilterConfig.ui:199 #. i18n: ectx: property (clickMessage), widget (KLineEdit, filterFilesPattern) #: rc.cpp:119 -#, fuzzy msgid "Pattern filter" -msgstr "Mønsteropdateringer" +msgstr "Mønsterfilter" #: shutdowndlg.cpp:511 -#, fuzzy, kde-format +#, kde-format msgid "Logging out in 1 second." msgid_plural "Logging out in %1 seconds." -msgstr[0] "Log ud om 1 sekund." -msgstr[1] "Log ud om %1 sekunder." +msgstr[0] "Logger ud om 1 sekund." +msgstr[1] "Logger ud om %1 sekunder." #: shutdowndlg.cpp:514 -#, fuzzy, kde-format +#, kde-format msgid "Turning off computer in 1 second." msgid_plural "Turning off computer in %1 seconds." -msgstr[0] "Sluk for computeren om 1 sekund." -msgstr[1] "Sluk for computeren om %1 sekunder." +msgstr[0] "Slukker for computeren om 1 sekund." +msgstr[1] "Slukker for computeren om %1 sekunder." #: shutdowndlg.cpp:517 -#, fuzzy, kde-format +#, kde-format msgid "Restarting computer in 1 second." msgid_plural "Restarting computer in %1 seconds." -msgstr[0] "Genstart computeren om 1 sekund." -msgstr[1] "Genstart computeren om %1 sekunder." +msgstr[0] "Genstarter computeren om 1 sekund." +msgstr[1] "Genstarter computeren om %1 sekunder." #: wallpaper.cpp:124 -#, fuzzy msgid "Unknown Wallpaper" -msgstr "Baggrundsbillede:" +msgstr "Ukendt baggrundsbillede" #: battery.cpp:318 -#, fuzzy msgid "Power Management" msgstr "Strømstyring" #: battery.cpp:347 -#, fuzzy msgid "Screen Brightness" -msgstr "Sæt lysstyrke til" +msgstr "Skærmens lysstyrke" #: battery.cpp:377 -#, fuzzy msgid "Power Profile" -msgstr "Vælg profil" +msgstr "Strømprofil" #: battery.cpp:475 #, kde-format msgid "Battery: %1% (fully charged)" -msgstr "" +msgstr "Batteri: %1% (fuldt opladt)" #: battery.cpp:477 -#, fuzzy, kde-format +#, kde-format msgid "Battery: %1% (discharging)" -msgstr " -- batteri er i gang med at lade op" +msgstr "Batteri: %1% (aflader)" #: battery.cpp:479 -#, fuzzy, kde-format +#, kde-format msgid "Battery: %1% (charging)" -msgstr " -- batteri er i gang med at lade op" +msgstr "Batteri: %1% (lader op)" #: battery.cpp:482 msgctxt "Battery is not plugged in" msgid "Battery: not present" -msgstr "" +msgstr "Batteri: Ikke til stede" #: battery.cpp:486 #, kde-format msgid "Battery %1: %2% (fully charged)" -msgstr "" +msgstr "Batteri %1: %2% (fuldt opladt)" #: battery.cpp:488 -#, fuzzy, kde-format +#, kde-format msgid "Battery %1: %2% (discharging)" -msgstr " -- batteri er i gang med at lade op" +msgstr "Batteri %1: %2% (aflader)" #: battery.cpp:490 -#, fuzzy, kde-format +#, kde-format msgid "Battery %1: %2% (charging)" -msgstr " -- batteri er i gang med at lade op" +msgstr "Batteri %1: %2% (lader op)" #: battery.cpp:495 -#, fuzzy msgid " AC Adapter: Plugged in" -msgstr "Strømforsyning tilsluttet" +msgstr " Strømforsyning: I stikkontakt" #: battery.cpp:497 -#, fuzzy msgid " AC Adapter: Not plugged in" -msgstr "Strømforsyning tilsluttet" +msgstr " Strømforsyning: Ikke i stikkontakt" #: core/applicationmodel.cpp:303 -#, fuzzy msgid "Recently Installed" -msgstr "Kun _installeret" +msgstr "Installeret for nylig" #: lockout.cpp:50 -#, fuzzy msgid "Alternate Button Order" -msgstr "&Omvendt knaprækkefølge" +msgstr "Omvendt knaprækkefølge" #. #-#-#-#-# quicklauncher.po #-#-#-#-# #. i18n: file: quicklauncherConfig.ui:25 #. i18n: ectx: property (text), widget (QLabel, lblVisibleIcons) #: ui/applet.cpp:239 rc.cpp:24 msgid "Visible icons:" -msgstr "" +msgstr "Synlige ikoner:" #: ui/applet.cpp:240 -#, fuzzy msgid "Hidden icons:" -msgstr "Gem dette _ikon" +msgstr "Skjulte ikoner:" #: panelcontroller.cpp:384 -#, fuzzy msgid "Panel Alignment" -msgstr "Titelplacering" +msgstr "Paneljustering" #: panelcontroller.cpp:409 -#, fuzzy msgid "Visibility" -msgstr "Tilgængelighed" +msgstr "Synlighed" #: panelcontroller.cpp:412 msgid "Always visible" -msgstr "" +msgstr "Altid synlig" #: panelcontroller.cpp:417 -#, fuzzy msgid "Auto hide" -msgstr "AutoYaST-fil" +msgstr "Skjul automatisk" #: panelcontroller.cpp:422 -#, fuzzy msgid "Windows can cover" -msgstr "Windows (andet)" +msgstr "Vinduer må dække" #: panelcontroller.cpp:429 -#, fuzzy msgid "Screen Edge" -msgstr "Skærmkanter" +msgstr "Skærmkant" #: panelcontroller.cpp:444 -#, fuzzy msgid "More Settings" -msgstr "Indstillinger for mus" +msgstr "Mere opsætning" #: panelcontroller.cpp:900 panelcontroller.cpp:909 -#, fuzzy, kde-format +#, kde-format msgid "Width: %1" -msgstr "Titel: %1" +msgstr "Bredde: %1" #: panelcontroller.cpp:917 panelcontroller.cpp:926 -#, fuzzy, kde-format +#, kde-format msgid "Height: %1" -msgstr "Vært: %1" +msgstr "Højde: %1" #. i18n: file: BackgroundDialog.ui:34 #. i18n: ectx: property (text), widget (QLabel, label_5) #: rc.cpp:3 -#, fuzzy msgid "Desktop Activity" -msgstr "Skrivebordsfunktioner" +msgstr "Desktop-aktivitet" #: image.cpp:117 image.cpp:157 msgid "Maxpect" -msgstr "" +msgstr "Makspekt" #. i18n: file: imageconfig.ui:249 #. i18n: ectx: property (text), widget (QPushButton, m_newStuff) #: rc.cpp:30 msgid "Get New Wallpapers..." -msgstr "" +msgstr "Hent nye baggrundsbilleder..." #. i18n: file: slideshowconfig.ui:28 #. i18n: ectx: property (text), widget (QLabel, label) #: rc.cpp:33 -#, fuzzy msgid "Folders:" -msgstr "Mappe: %1" +msgstr "Mapper:" #: libkdcraw/dcrawsettingswidget.cpp:219 msgid "Visit LibRaw project website" -msgstr "" +msgstr "Besøg LibRaw-projektets hjemmeside" #: libkdcraw/dcrawsettingswidget.cpp:232 -#, fuzzy msgid "Quality:" -msgstr "Kvalitet" +msgstr "Kvalitet:" #: libkdcraw/dcrawsettingswidget.cpp:239 msgid "Quality (interpolation)Select here the demosaicing RAW images decoding interpolation method. A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor internal to many digital cameras in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicing. There are 4 methods to demosaicing RAW images:Bilinear: use high-speed but low- quality bilinear interpolation (default - for slow computer). In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similar for blue and green.VNG: use Variable Number of Gradients interpolation. This method computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate.PPG: use Patterned Pixel Grouping interpolation. Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.AHD: use Adaptive Homogeneity- Directed interpolation. This method selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts." msgstr "" +"Kvalitet (interpolation)Vælg metode dekodningsinterpolation for demosaicing af RAW-billeder her. En demsaicing-algoritme er en digital billedproces, som bruges til at interpolere et komplet billede, ud fra ufuldstændig raw-data modtaget fra den farvefiltrerede billedsensor som findes internt i mange digitale kameraer, i form af en matrix af farvede pixels. Også kendt som CFA-interpolation eller farverekonstruktion - et andet almindeligt kaldenavn er demosaicing. Der er fire metoder til demosaicing af RAW- billeder:Bilineær: Brug bilineær interpolation med høj hastighed men lav kvalitet (standard - for langsomme computere). Med denne metode, beregnes den røde værdi for en ikke-rød pixel som gennemsnittet af de omkringliggende røde rixels, og tilsvarende for blå og grøn.VNG: Brug interpolation med variabelt antal overgange. Denne metode beregner overgange nær den relevante pixel og brugere de lavere overgange (som repræsenterer blødere og mere lignende dele af billedet) til at gøre et estimat.PPG: Brug interpolation med mønstret pixelgruppering. Pixelgruppering bruger antagelser om naturligt sceneri når der skal foretages estimater. Det har færre farveartifakter på naturlige billeder end metoden med variabelt antal overgange.AHD: Brug interpolation med tilpassende homongenitetsstyring. Denne metode vælger " +"retningen af interpolationen for at maksimere en homogenitetsmetrik, således minimeres farveartefakter typisk." #: libkdcraw/dcrawsettingswidget.cpp:269 -#, fuzzy msgid "Median:" -msgstr "Medie" +msgstr "Median:" #: libkdcraw/dcrawsettingswidget.cpp:270 msgid "Median FilterSet here the passes used by median filter applied after interpolation to Red-Green and Blue-Green channels." -msgstr "" +msgstr "Medianfilter" #: libkdcraw/dcrawsettingswidget.cpp:276 msgid "Demosaicing" -msgstr "" +msgstr "Demosaicing" #: libkdcraw/dcrawsettingswidget.cpp:284 -#, fuzzy msgid "Method" -msgstr "Metode:" +msgstr "Metode" #: libkdcraw/dcrawsettingswidget.cpp:286 -#, fuzzy msgid "Default D65" -msgstr "Standard" +msgstr "Standard D65" # CM #: libkdcraw/dcrawsettingswidget.cpp:287 -#, fuzzy msgid "Camera" -msgstr "Cameroun" +msgstr "Kamera" #: libkdcraw/dcrawsettingswidget.cpp:288 -#, fuzzy msgid "Automatic" -msgstr "Automatisk tilstand" +msgstr "Automatisk" #: libkdcraw/dcrawsettingswidget.cpp:291 msgid "White BalanceConfigure the raw white balance :Default D65: Use a standard daylight D65 white balance (dcraw defaults)Camera: Use the white balance specified by the camera. If not available, reverts to default neutral white balanceAutomatic: Calculates an automatic white balance averaging the entire imageManual: Set a custom temperature and green level values" -msgstr "" +msgstr "HvidbalanceIndstil hvidbalance for raw: Standard D65: Brug en standard D65 hvidbalance til dagslys (dcraw standard)Kamera: Brug hvidbalancen angivet af kameraet. Hvis ikke tilgængelig, vendes tilbage til standard neutral hvidbalanceAutomatisk: Beregner en automatisk hvidbalance ud fra et gennemsnit af hele billedetManuel: Angiv en brugerdefineret temperatur og værdier for grøntniveau" #: libkdcraw/dcrawsettingswidget.cpp:304 msgid "T(K):" -msgstr "" +msgstr "T(K):" #: libkdcraw/dcrawsettingswidget.cpp:305 msgid "TemperatureSet here the color temperature in Kelvin." -msgstr "" +msgstr "TemperaturAngiv farvetemperaturen her i Kelvin." #: libkdcraw/dcrawsettingswidget.cpp:357 -#, fuzzy msgid "Black:" -msgstr "Sæt på sortlisten" +msgstr "Sort:" #: libkdcraw/dcrawsettingswidget.cpp:369 msgid "White:" -msgstr "" +msgstr "Hvid:" #: libkdcraw/dcrawsettingswidget.cpp:370 msgid "White pointUse a specific white point value to decode RAW pictures. If you set this option to off, the White Point value will be automatically computed." -msgstr "" +msgstr "Hvidt punktBrugt en specifik værdi for hvidt punkt til at dekode RAW-billeder. Hvis du slår denne indstilling fra, vil værdien for hvidt punkt blive beregnet automatisk." #: libkdcraw/dcrawsettingswidget.cpp:378 msgid "White point valueSpecify specific white point value of the output image." -msgstr "" +msgstr "Værdi for hvidt punktAngiv specifik værdi for hvidt punkt for output-billedet." #: libkdcraw/dcrawsettingswidget.cpp:408 -#, fuzzy msgid "White Balance" -msgstr "Write back" +msgstr "Hvidbalance" #: libkdcraw/dcrawsettingswidget.cpp:461 -#, fuzzy msgid "Corrections" -msgstr "Forbindelser" +msgstr "Korrektioner" #: libkdcraw/dcrawsettingswidget.cpp:469 -#, fuzzy msgid "Camera Profile:" -msgstr "Vælg profil" +msgstr "Kameraprofil:" #: libkdcraw/dcrawsettingswidget.cpp:472 msgid "Embedded" -msgstr "" +msgstr "Indlejret" #: libkdcraw/dcrawsettingswidget.cpp:473 libkdcraw/dcrawsettingswidget.cpp:492 msgid "Custom" -msgstr "" +msgstr "Brugerdefineret" #: libkdcraw/dcrawsettingswidget.cpp:475 msgid "Camera ProfileSelect here the input color space used to decode RAW data.None: no input color profile is used during RAW decoding.Embedded: use embedded color profile from RAW file if exist.Custom: use a custom input color space profile." -msgstr "" +msgstr "KameraprofilVælg input-farverummet som skal bruges til at dekode RAW-data her.Ingen: Ingen input-farveprofil bruges under dekodning af RAW.Indlejret: Brug indlejret farveprofil fra RAW-fil hvis den findes.Brugerdefineret: Brug en brugerdefineret profil til input-farverum." #: libkdcraw/dcrawsettingswidget.cpp:483 libkdcraw/dcrawsettingswidget.cpp:513 msgid "ICC Files (*.icc; *.icm)" -msgstr "" +msgstr "ICC-filer (*.icc, *.icm)" #: libkdcraw/dcrawsettingswidget.cpp:485 -#, fuzzy msgid "Workspace:" -msgstr "Backspace" +msgstr "Arbejdsrum:" #: libkdcraw/dcrawsettingswidget.cpp:494 msgid "WorkspaceSelect here the output color space used to decode RAW data.Raw (linear): in this mode, no output color space is used during RAW decoding.sRGB: this is a RGB color space, created cooperatively by Hewlett-Packard and Microsoft. It is the best choice for images destined for the Web and portrait photography.Adobe RGB: this color space is an extended RGB color space, developed by Adobe. It is used for photography applications such as advertising and fine art.Wide Gamut: this color space is an expanded version of the Adobe RGB color space.Pro-Photo: this color space is an RGB color space, developed by Kodak, that offers an especially large gamut designed for use with photographic outputs in mind.Custom: use a custom output color space profile." -msgstr "" +msgstr "ArbejdsrumVælg output-farverummet, der skal bruges til at dekode RAW-data, her.Raw (lineær): I denne tilstand bruges intet output-farverum under dekodning af RAW.sRGB: Dette er et RGB- farverum, skabt af Hewlett-Packard og Microsoft i samarbejde. Det er det bedste valg til billeder tiltænkt nettet og portrætfotografi.Adobe RGB: Dette farverum er et udviddet RGB-farverum, udviklet af Adobe. Det bruges til fotografianvendelser såsom reklame og fin kunst.Wide Gamut: Dette farverum er en udviddet version af Adobe RGB- farverummet.Pro-Photo: Dette farverum er et RGB-farverum, udviklet af Kodak, som tilbyder en særligt stor gamut, designet med fotografisk output i tankerne.Brugerdefineret: Brug en brugerdefineret profil til output-farverum." #: libkdcraw/dcrawsettingswidget.cpp:525 -#, fuzzy msgid "Color Management" -msgstr "Strømstyring" +msgstr "Farvehåndtering" #: libkdcraw/rcombobox.cpp:72 libkdcraw/rnuminput.cpp:73 #: libkdcraw/rnuminput.cpp:176 msgid "Reset to default value" -msgstr "" +msgstr "Nultil til standardværdien" #: popupdialog.cpp:87 -#, fuzzy msgid "Sort by Name" -msgstr "Kort navn" +msgstr "Sortér efter navn" #: popupdialog.cpp:90 -#, fuzzy msgid "Sort by Size" -msgstr "S~orter efter" +msgstr "Sortér efter størrelse" #: popupdialog.cpp:93 msgid "Sort by Last Modified" -msgstr "" +msgstr "Sortér efter senest ændret" #: quickaccess.cpp:207 msgid "Sorry, but the \"applications:\" KIO slave is not supported, because it will crash QuickAccess/Plasma..." -msgstr "" +msgstr "Beklager, men KIO-slaven \"applications:\" er ikke understøttet, da den vil få QuickAccess/Plasma til at bryde sammen..." #. i18n: file: quickaccessConfig.ui:39 #. i18n: ectx: property (text), widget (QLabel, selectLabel) #: rc.cpp:12 -#, fuzzy msgid "Directory:" msgstr "Mappe: " #. i18n: file: quickaccessConfig.ui:62 #. i18n: ectx: property (text), widget (QLabel, filterLabel) #: rc.cpp:15 -#, fuzzy msgid "Filters:" -msgstr "_Filtre" +msgstr "Filtre:" #. i18n: file: quickaccessConfig.ui:104 #. i18n: ectx: property (text), widget (QCheckBox, hiddenBox) #: rc.cpp:18 msgid "Show hidden files" -msgstr "" +msgstr "Vis skjulte filer" -# #. i18n: file: quickaccessConfig.ui:111 #. i18n: ectx: property (text), widget (QCheckBox, onlyDirsBox) #: rc.cpp:21 -#, fuzzy msgid "Show only folders" -msgstr "Centrale mapper" +msgstr "Vis kun mapper" #. i18n: file: quickaccessConfig.ui:118 #. i18n: ectx: property (text), widget (QCheckBox, navigationBox) #: rc.cpp:24 -#, fuzzy msgid "Allow navigation" -msgstr "Alle programmer" +msgstr "Tillad navigation" #. i18n: file: quickaccessConfig.ui:170 #. i18n: ectx: property (text), widget (QLabel, label_2) #: rc.cpp:30 -#, fuzzy msgid "Custom icon:" -msgstr "Brugerdefinerede i&konfarver" +msgstr "Brugerdefineret ikon:" #. i18n: file: quickaccessConfig.ui:210 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:36 -#, fuzzy msgid "16" -msgstr "1" +msgstr "16" #. i18n: file: quickaccessConfig.ui:215 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:39 -#, fuzzy msgid "22" -msgstr "2" +msgstr "22" #. i18n: file: quickaccessConfig.ui:220 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:42 -#, fuzzy msgid "32" -msgstr "2" +msgstr "32" #. i18n: file: quickaccessConfig.ui:225 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:45 -#, fuzzy msgid "48" -msgstr "8" +msgstr "48" #. i18n: file: quickaccessConfig.ui:230 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:48 -#, fuzzy msgid "64" -msgstr "4" +msgstr "64" #. i18n: file: quickaccessConfig.ui:235 #. i18n: ectx: property (text), item, widget (QComboBox, iconSizeCombo) #: rc.cpp:51 -#, fuzzy msgid "128" -msgstr "WEP-128" +msgstr "128" #. i18n: file: quickaccessConfig.ui:249 #. i18n: ectx: property (text), widget (QLabel, label_3) #: rc.cpp:54 -#, fuzzy msgid "View mode:" -msgstr "Vis loggen" +msgstr "Visningstilstand:" # video mode menu item #. i18n: file: quickaccessConfig.ui:260 #. i18n: ectx: property (text), item, widget (QComboBox, viewModeCombo) #: rc.cpp:57 -#, fuzzy msgid "List Mode" -msgstr "Teksttilstand" +msgstr "Listetilstand" #. i18n: file: quickaccessConfig.ui:265 #. i18n: ectx: property (text), item, widget (QComboBox, viewModeCombo) #: rc.cpp:60 -#, fuzzy msgid "Icon Mode" -msgstr "Port og tilstand" +msgstr "Ikontilstand" #. i18n: file: quickaccessConfig.ui:275 #. i18n: ectx: property (text), widget (QCheckBox, tooltipBox) #: rc.cpp:63 -#, fuzzy msgid "Show tooltips" -msgstr "Vis skrivebord" +msgstr "Vis værktøjstip" #. i18n: file: quickaccessConfig.ui:282 #. i18n: ectx: property (text), widget (QCheckBox, customLabelBox) #: rc.cpp:66 msgid "Use a custom label" -msgstr "" +msgstr "Brug en brugerdefineret etiket" #. i18n: file: quickaccessConfig.ui:357 #. i18n: ectx: attribute (title), widget (QWidget, preview) #: rc.cpp:72 -#, fuzzy msgid "Preview" -msgstr "_Vis igen" +msgstr "Forhåndsvisning" #. i18n: file: quickaccessConfig.ui:363 #. i18n: ectx: property (text), widget (QCheckBox, previewBox) #: rc.cpp:75 -#, fuzzy msgid "Show previews" -msgstr "Forhåndsvisning af logo:" +msgstr "Forhåndsvis" #. i18n: file: quickaccessConfig.ui:377 #. i18n: ectx: property (text), widget (QLabel, previewLabel1) #: rc.cpp:78 msgid "Preview plugins:" -msgstr "" +msgstr "Plugins til forhåndsvisning:" #. i18n: file: quickaccessConfig.ui:386 #. i18n: ectx: property (text), widget (QLabel, previewLabel2) #: rc.cpp:81 msgid "Here you can enable/disable the plugins." -msgstr "" +msgstr "Her kan du aktivere/deaktivere plugins." #: quicklauncher.cpp:295 msgid "Add Icon..." -msgstr "" +msgstr "Tilføj ikon..." #: quicklauncher.cpp:302 -#, fuzzy msgid "Remove Icon" -msgstr "Fjern" +msgstr "Fjern ikon" #. i18n: file: quicklauncherConfig.ui:5 #. i18n: ectx: property (windowTitle), widget (QWidget, quicklauncherConfig) #. i18n: file: quicklauncherConfig.ui:8 #. i18n: ectx: property (accessibleName), widget (QWidget, quicklauncherConfig) #: quicklauncher.cpp:315 rc.cpp:15 rc.cpp:18 -#, fuzzy msgid "QuickLauncher Configuration" -msgstr "Vis konfiguration" +msgstr "Konfiguration af QuickLauncher" #. i18n: file: quicklauncherAdd.ui:13 #. i18n: ectx: property (windowTitle), widget (QWidget, quicklauncherAdd) #. i18n: file: quicklauncherAdd.ui:16 #. i18n: ectx: property (accessibleName), widget (QWidget, quicklauncherAdd) #: quicklauncher.cpp:336 rc.cpp:3 rc.cpp:6 msgid "Add Shortcut" -msgstr "" +msgstr "Tilføj genvej" #. i18n: file: quicklauncherAdd.ui:22 #. i18n: ectx: property (text), widget (QLabel, lblIcon1) #: rc.cpp:9 -#, fuzzy msgid "New icon:" -msgstr "Ny version" +msgstr "Nyt ikon:" #. i18n: file: quicklauncherAdd.ui:29 #. i18n: ectx: property (filter), widget (KUrlRequester, urlIcon) #: rc.cpp:12 -#, fuzzy msgid "*.desktop" -msgstr "Skrivebord" +msgstr "*.desktop" #. i18n: file: quicklauncherConfig.ui:15 #. i18n: ectx: property (text), widget (QLabel, lblRowNums) #: rc.cpp:21 -#, fuzzy msgid "Number of rows:" -msgstr "Tal" +msgstr "Antal rækker:" -- To unsubscribe, e-mail: opensuse-da+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-da+help(a)opensuse.org

2 1

[opensuse-da] yast - support.da.po (igen)
by Jan Madsen 30 Oct '08

30 Oct '08

#: src/dialogs.ycp:118 msgid "Couldn't find any installed browser." -msgstr "" +msgstr "Kunne ikke finde nogen installeret browser." #: src/dialogs.ycp:123 #, ycp-format msgid "" "YaST will run a web browser as superuser. Consider\n" "running it as a non-provileged user and entering URL\n" "%1.\n" "Start web browser?" msgstr "" +"YaST vil køre en webbrowser som superbruger. Overvej\n" +"at køre den som ikke-privilegeret bruger og angiv flg. URL:\n" +"%1.\n" +"Vil du starte en webbrowser?" #: src/dialogs.ycp:148 -#, fuzzy msgid "Save as" msgstr "Gem som" #: src/dialogs.ycp:150 -#, fuzzy msgid "Directory to Save" -msgstr "Vælg mappe, hvor tarball skal gemmes" +msgstr "Mappe til at gemme" #: src/dialogs.ycp:479 -#, fuzzy msgid "Contact Information" -msgstr "Informationer om kontakter" +msgstr "Kontaktinformation" #: src/dialogs.ycp:487 -#, fuzzy msgid "Upload Information" -msgstr "Upload informationer" +msgstr "Upload information" #. Ovreview dialog help 1/3 #: src/helps.ycp:80 msgid "" "\n" "<big>Opening Novell Support Center</big> \n" "To start a web browser that opens the Novell Support Center Portal, use Open Novell Support Center.\n" "You can then open a Service Request with Novell Technical Support. Make sure you write down\n" "the Service Request number to include in the supportconfig data upload." msgstr "" +"\n" +"<big>Åbne Novell Support Center</big> \n" +"Brug Åbn Novell Support Center til at starte en webbrowser, der åbner portalen Novell Support Center.\n" +"Du kan så åbne en serviceforespørgsel med Novell Teknisk Support. Husk at skrive nummeret på serviceforespørgslen ned for at inkludere det i upload af supportconfig-data." #. Ovreview dialog help 2/3 #: src/helps.ycp:86 msgid "" "<big>Collecting Data</big> \n" "To run the supportconfig data collection tool, use Collect Data" msgstr "" +"<big>Indsamle data</big> \n" +"Brug Indsaml data for at køre værktøjet til indsamling af supportconfig-data" #. Ovreview dialog help 3/3 #: src/helps.ycp:89 msgid "" "<big>Uploading Collected Data</big> \n" "To upload the data already collected to a server, use Upload Data.\n" "The server may or may not be Novell Technical Support." msgstr "" +"<big>Uploade indsamlede data</big> \n" +"Brug Upload data for at uploade de allerede indsamlede data til en server.\n" +"Serveren kan være/ikke være Novell Teknisk Support." #. Configure1 dialog help 1/3 #: src/helps.ycp:94 msgid "" "<big>Supportconfig Options</big> \n" "Select an option to override the defaults. You can use the default settings,\n" "gather the most data or only gather a minimum amount of data." msgstr "" +"<big>Supportconfig-valgmuligheder</big> \n" +"Vælg en mulighed for at tilsidesætte standarden. Du kan bruge\n" +"standardindstillingen, samle flest data eller kun et minimum af data." #. Configure1 dialog help 2/3 #: src/helps.ycp:98 msgid "" "<big>Expert Settings</big> \n" "Select Use Custom and the Expert Settings button\n" "to select specific data sets to collect." msgstr "" +"<big>Ekspertindstillinger</big> \n" +"Tryk på Brug selvvalgte og Ekspertindstillinger\n" +"for at vælge specifikke datasæt til indsamling." #. Configure1 dialog help 3/3 #: src/helps.ycp:103 msgid "" "<big>Options</big> \n" "You can collect additional information. Usually these options are not\n" "necessary, but can be included when circumstances require." msgstr "" +"<big>Valgm,uligheder</big> \n" +"Du kan indsamle yderligere information. Normalt er disse valgmuligheder\n" +"ikke nødvendige, men de kan inkluderes, når omstændighederne kræver det." #. Expert dialog help 1/1 #: src/helps.ycp:108 msgid "" "<big>Default Options</big> \n" "Select or deselect each of the data sets you would like to include in the supportconfig tarball." msgstr "" +"<big>Standardvalgmuligheder</big> \n" +"Vælg og fravælg de datasæt, du vil inkludere i en supportconfig-tarball." #. Contact dialog help 1/4 #: src/helps.ycp:112 msgid "" "<big>Contact Information</big><br?\n" "Fill in each of the contact information fields that you would like to include\n" "in the supportconfig tarball. The fields are saved in the basic-environment.txt file." msgstr "" +"<big>Kontaktinformation</big><br?\n" +"Fyld de felter ud i kontaktinformationen, du vil inkludere i en supportconfig-tarball.\n" +"Felterne gemmes i filen basic-environment.txt." #. Contact dialog help 2/4 #: src/helps.ycp:116 msgid "" "<big>Upload Information</big> \n" "The upload target is the supportconfig tarball's destination URI. Supported upload services include\n" "ftp, http, https, scp. If you need to include the supportconfig tarball filename in your upload target,\n" "use the tarball keyword. This will get replaced with the actual tarball filename.\n" "See man supportconfig(1) for further details." msgstr "" +"<big>Upload information</big> \n" +"Målet for upload er supportconfig-tarball's destinations-URI. Understøttede upload-tjenester\n" +"inkluderer ftp, http, https og scp. Brug nøgleordet tarball, hvis du skal inkludere filnavnet\n" +"på supportconfig-tarball i målet for din upload. Dette erstattes af det faktiske tarball-filnavn.\n" +"Se man supportconfig(1) for yderligere detaljer." #. Contact dialog help 3/4 #: src/helps.ycp:122 msgid "" "<big>Upload Target Examples</big> \n" "https://secure-www.novell.com/upload?appname=supportconfig&file=tarball \n" "ftp://ftp.novell.com/incoming \n" "scp://central.server.foo.com/supportconfig/archives" msgstr "" +"<big>Eksempler på mål for upload:</big> \n" +"https://secure-www.novell.com/upload?appname=supportconfig&file=tarball \n" +"ftp://ftp.novell.com/incoming \n" +"scp://central.server.foo.com/supportconfig/archives" #. Contact dialog help 4/4 #: src/helps.ycp:127 msgid "" "Note: If you are uploading a supportconfig tarball to Novell Technical Support,\n" "make sure you include the Novell 11 digit service request number from your open service request." msgstr "" +"Bemærk: Hvis du uploader en supportconfig-tarball til Novell Teknisk Support,\n" +"skal du huske at inkludere Novell's 11-cifrede nummer fra din åbne serviceforespørgsel." #. Collecting data dialkog help 1/1 #: src/helps.ycp:131 msgid "" "<big>Collecting Data</big>> \n" "Please wait while the data is being collected." msgstr "" +"<big>Indsamler data</big>> \n" +"Vent venligst mens data bliver indsamlet." #. Data review dialog help 1/1 #: src/helps.ycp:135 msgid "" "<big>Collected Data Review</big> \n" "Review the data collected by supportconfig. If you do not want to share some of the collected data,\n" "use Remove from Data and selected file will be removed." msgstr "" +"<big>Gennemsyn af indsamlede data</big> \n" +"Gennemse data indsamlet af supportconfig. Brug Fjern fra data, hvis du ikke vil dele\n" +"nogle af de indsamlede data, og den valgte fil bliver fjernet." #. Configure1 dialog help 1/2 #: src/helps.ycp:140 msgid "" "<big>Upload supportconfig tarball to Novell Technical Support</big> \n" "If you want to store copy of supportconfig tarball, select target directory and be sure that this option\n" " is checked.\n" " " msgstr "" +"<big>Upload supportconfig-tarball til Novell Teknisk Support</big> \n" +"Hvis du vil gemme en kopi af en supportconfig-tarball, skal du vælge en målmappe og tilsikre at\n" +"denne valgmulighed er markeret\n" +" " #. Configure1 dialog help 2/2 #: src/helps.ycp:146 src/helps.ycp:156 msgid "" "<big>Upload URL</big> \n" "This option has default value where supportconfig tarball will be uploaded.\n" "Change this value only in special cases.\n" "" msgstr "" +"<big>Upload URL</big> \n" +"Denne valgmulighed har standardværdien, hvor en supportconfig-tarball bliver uploadet.\n" +"Ændr kun denne værdi i særlige tilfælde.\n" +"" #: src/helps.ycp:151 msgid "" "<big>Upload supportconfig tarball to Novell Technical Support</big> \n" "If you have supportconfig tarball already created, write full path into Package with log files field.\n" " " msgstr "" +"<big>Upload supportconfig-tarball til Novell Teknisk Support</big> \n" +"Hvis du allerede har oprettet en supportconfig-tarball, skrives den fulde søgesti i feltet Pakke med log-filer.\n" +" "

1 0