July 2004 - openSUSE AMD64 - openSUSE Mailing Lists

Re: [suse-amd64] 9.1 and ASUS L5800DF: pcmcia
by Matt T. 29 Jul '04

29 Jul '04

On Wednesday 28 July 2004 16:17, Sebastian Henschel wrote: > hi matt.. > > * "Matt T." <Matt(a)Boons.net> [2004-07-27 10:28 +0200]: > > On Monday 26 July 2004 22:03, Sebastian Henschel wrote: > > > unfortunately, i could not get pcmcia to work on an ASUS L5800DF with > > > mobile athlon64. when i insert any pcmcia-card, i get: > > > > > > cs: unable to map card memory > > > [snip] > > > cs: unable to map card memory! > > > cs: unable to map card memory! > > > cs: unable to map card memory! > > > cs: unable to map card memory! > > > cs: unable to map card memory! > > > cs: unable to map card memory! > > > > I'm seeing the same on a HP zv5188ea. The HP and the Compaq presarios > > with AMD64 seem to be almost identical, and all have this problem. Your > > asus seems also to have the nforce3, so I guess you have the same > > problem: > > > > As a first step you might need to add a memory range to > > the /etc/pcmcia/config.opts file. > > [...] [snip] > > From your lspci I think you need to include > > > > I/O behind bridge: 0000b000-0000dfff > > Memory behind bridge: f8a00000-feafffff > > aha, i looked at the cardbus bridges and their window-/io-window. > > [...] > > > This step did make the error message dissappear in my hp, however it was > > not enough to get the drivers loaded. > > the error message does not appear on that machine now, too. even the > drivers load, but it seems unuseable. the driver of the network card > spits out loads of "excess collisions", "transmitter busy", aso. the > modem claims ttyS0/1 which are already used (by IrDA for instance). the first time it did run I got a wrong dev (ttyS14), and from then on (forgot if I changed something) it gave me ttyS4, which works fine. This is with 2.6.8-rc2 though. And I do not have IrDA :-( > > > This seems to be a kernel issue. I compiled vanilla 2.6.8-rc2, and now > > the device (here /dev/ttyxx) gets assigned to the pcmcia card. > > > > 2.6.7 might help also. BUT - you might loose your touchpad. SuSE has > > apparently included all to have notebooks with synaptics / alps touchpads > > working, but if you use the vanilla kernel, you need to patch it > > yourself. I can't tell yet how to do it, I'm still stuck in the middle of > > it. > > i am already 2.6.7 running with the latest ACPI patch. no problem with > the touchpad. Intersting, you used stock vanilla and then you applied an ACPI patch? Please point me to that patch, this might be missing for me and causing my USB problems. [snip] > > thanks, > sebastian Thanks, Matt

1 0

Re: [suse-amd64] 9.1 and ASUS L5800DF: pcmcia - touchpad
by Matt T. 29 Jul '04

29 Jul '04

On Wednesday 28 July 2004 16:17, Sebastian Henschel wrote: > hi matt.. > > * "Matt T." <Matt(a)Boons.net> [2004-07-27 10:28 +0200]: > > On Monday 26 July 2004 22:03, Sebastian Henschel wrote: > > > unfortunately, i could not get pcmcia to work on an ASUS L5800DF with > > > mobile athlon64. when i insert any pcmcia-card, i get: > > > [snip] > > > This seems to be a kernel issue. I compiled vanilla 2.6.8-rc2, and now > > the device (here /dev/ttyxx) gets assigned to the pcmcia card. > > > > 2.6.7 might help also. BUT - you might loose your touchpad. SuSE has > > apparently included all to have notebooks with synaptics / alps touchpads > > working, but if you use the vanilla kernel, you need to patch it > > yourself. I can't tell yet how to do it, I'm still stuck in the middle of > > it. > > i am already 2.6.7 running with the latest ACPI patch. no problem with > the touchpad. although i could not compile 0.3.13 from source, due to > some incompatibilities when linking with Xext. but the driver shipped > with suse 9.1 seems to work fine with X11. > Yeah, this is a really nasty one, yesterday night I solved it though: - the makefile contains -X11 and -lXext -> ld tries to link it with the libraries libX11 and libXext in ../lib/ which is nonsense because there are the 32 bit versions, and we are compiling 64 bit, right! In order to change that to ../lib64/.. we need to give ld the correct search path. ldconfig seems to have the /lib64/ path's, but that does not help. But if you look in the makefile in the only line which has the -lX11 and -lXext, there is a -L(path) option given before. And this is taken the /lib/ value from the LIBDIRECTORY definition at the beginning of the makefile. And there - oops - is lib and not lib64. So just change that line to =lib64, and it will compile, and it will install correctly (in lib64 and not in lib). After installing it, and after adding the synaptics section to your XF86Config, it works really fine, even the scroll area, which emulates a mouse wheel, works. But before you go through that, what touchpad do you have in your notebook? Is it synaptics or Alps? As a downside the USB Mouse does not work anymore. I do not know yet why, it apparently does not even get recognized at all anymore. It seems o be a problem with USB in general. I'm working on that ... HTH, Matt > > anyway, the user wants to have his machine, so he has to live with it > for now. :) > > thanks, > sebastian

1 0

MPlayer 1.0pre5 - Compile Error `CONFIG_X86_L1_CACHE_SHIFT'
by Scott Leighton 29 Jul '04

29 Jul '04

Having a problem compiling the latest version of MPlayer (I did get an earlier version compiled with no problems). Has anyone gotten the 64 bit version of this to compile, or does anyone have a suggestion on how to resolve the error: `CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function) Scott helphand@helphand:~/MPlayer-1.0pre5> make make -C libvo make[1]: Entering directory `/home/helphand/MPlayer-1.0pre5/libvo' cc -c -I../libvo -I../../libvo -I/usr/X11/include -O4 -pipe -ffast-math -fomit-frame-pointer -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -I.. -I../osdep -I/usr/include/freetype2 -I/usr/X11/include -I/usr/include/directfb -DMPG12PLAY -o vo_fbdev.o vo_fbdev.c In file included from /usr/include/asm/pda.h:4, from /usr/include/asm-x86_64/thread_info.h:14, from /usr/include/asm/thread_info.h:4, from /usr/include/linux/thread_info.h:21, from ../osdep/kerneltwosix.h:4, from vo_fbdev.c:21: /usr/include/asm-x86_64/pda.h:26: error: `CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function) /usr/include/asm-x86_64/pda.h:26: error: requested alignment is not a constant In file included from /usr/include/asm/processor.h:4, from /usr/include/linux/prefetch.h:13, from /usr/include/linux/list.h:7, from ../osdep/kerneltwosix.h:5, from vo_fbdev.c:21: /usr/include/asm-x86_64/processor.h:229: error: `CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function) /usr/include/asm-x86_64/processor.h:229: error: requested alignment is not a constant make[1]: *** [vo_fbdev.o] Error 1 make[1]: Leaving directory `/home/helphand/MPlayer-1.0pre5/libvo' make: *** [libvo/libvo.a] Error 2 helphand@helphand:~/MPlayer-1.0pre5> -- POPFile, the OpenSource EMail Classifier http://popfile.sourceforge.net/ Linux 2.6.5-7.95-default x86_64

1 0

DDR 400--Or, Does This Sound Right?
by Bryce Hardy 28 Jul '04

28 Jul '04

I bought my AMD64 system in early May. It has a 3200+ processor on a Gigabyte K8N Pro MB with 1 GB of DDR 400 RAM. For over two months I've been running SuSE 9.1 in 64 bit mode with no problems. Suddenly a week or so ago I encountered system freeze ups to the point where I couldn't even run Knoppix anymore. Long story short, the repair guy at the local shop I bought the box at said that on AMD64 systems, the DDR 400 memory needs to be underclocked down to DDR 333. "Why would it work for two months with no problem?" said I. "That's the way they are." said he. Does this sound right? Does anyone here have DDR 400 RAM on their boxes that work properly? I haven't even gone into how they snookered me out of $100 for a new hard drive when we thought the freeze ups were related to hard drive access. So you can see the reason I'm a little sceptical. It just doesn't sound right that you can't run DDR 400 on 64 bit, but who knows? (Hopefully someone here, which is why I'm asking... :-) -- Bryce Hardy (Santa Rosa, CA USA) cygnia(a)sonic.net

8 7

lm_sensors modules on SuSE-9.0
by Mikhail Kuzminsky 28 Jul '04

28 Jul '04

Hello, I tried to work w/lm_sensors-2.8.0-75.x86-64.rpm under SuSe Linux 9.0 for Opteron. We have Tyan S2880/K8S motherboard which uses W83627hf chip. sensors-detect detects this chip, but there is no like module in RPM package :-( Current lm_sensors source version (on lm_sensors Web-site) is 2.8.7, but it requires i2c version at least 2.8.1 and I need to patch the kernel for this i2c version. I'm afraid a bit this procedure, because it's not 32-bit but 64-bit kernel, and SuSE kernel includes a set of SuSE enhancements. Sorry, do somebody work w/lm_sensors, SuSE 9.0 & S2880 mobos ? If yes, how you resolved this problem ? Thanks for your help ! Mikhail Kuzminsky Zelinsky Institute of Organic Chemistry Moscow

2 4

Postfix smtp crashes with Signal 11 (SIGSEGV)
by Kai-H. Weutzing 28 Jul '04

28 Jul '04

Hi all, on my SuSE 9.1 x86_64 I have the postfix mailer activ (rpm: postfix-2.0.19_20040312-11). All works fine, but if I have a bounce the smtp process crashes [1] with the result that a bounce email was generated but orgininal email would be resist in the activ queue. I have debugged the smtp, qmgr and bounce process, but it tells me only that the stdin parameters are wrong. [2] I googled on this problem, but I didn't found much about this problem. The only thing was a reported bug in the SSL/TLS/SASL implementation. But that didn't help me much:-) So I build my own postfix (2.1.4) and everything (bouncing and SSL, SASL, too) works fine! But for easier updating I like to use the SuSE package.. So any ideas?! btw. the same postfix configuration (main.cf, master.cf) runs well on different machines and the rest on this maschine works fine! Greetings Kai [1] Snapshot out of the syslog: Jul 26 17:26:55 server08 postfix/smtp[15808]: < mx0.gmx.de[213.165.64.100]: 550 5.1.1 {mx036} <dfjgldkfgjldfjgdf(a)gmx.de>... User is unknown Jul 26 17:26:55 server08 postfix/smtp[15808]: connect to subsystem private/bounce Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr nrequest = 0 Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr flags = 0 Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr queue_id = 46E2D5863EF Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr original_recipient = dfjgldkfgjldfjgdf(a)gmx.de Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr recipient = dfjgldkfgjldfjgdf(a)gmx.de Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr offset = 157 Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr status = 5.0.0 Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr action = failed Jul 26 17:26:55 server08 postfix/smtp[15808]: send attr reason = host mx0.gmx.de[213.165.64.100] said: 550 5.1.1 {mx036} <dfjgldkfgjldfjgdf(a)gmx.de>... User is unknown (in reply to RCPT TO command) Jul 26 17:26:55 server08 postfix/smtp[15808]: private/bounce socket: wanted attribute: status Jul 26 17:26:55 server08 postfix/bounce[15815]: running: PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;?echo where) | gdb /usr/lib/postfix/bounce 15815 2>&1?>/etc/postfix/bounce.15815.log & sleep 5 Jul 26 17:27:01 server08 postfix/smtp[15808]: input attribute name: status Jul 26 17:27:01 server08 postfix/smtp[15808]: input attribute value: 0 Jul 26 17:27:01 server08 postfix/smtp[15808]: private/bounce socket: wanted attribute: (list terminator) Jul 26 17:27:01 server08 postfix/smtp[15808]: input attribute name: (end) Jul 26 17:27:01 server08 postfix/master[15134]: warning: process /usr/lib/postfix/smtp pid 15808 killed by signal 11 Jul 26 17:27:01 server08 postfix/master[15134]: warning: /usr/lib/postfix/smtp: bad command startup -- throttling Jul 26 17:27:01 server08 postfix/qmgr[15658]: warning: premature end-of-input on private/smtp socket while reading input attribute name Jul 26 17:27:01 server08 postfix/qmgr[15658]: warning: private/smtp socket: malformed response Jul 26 17:27:01 server08 postfix/qmgr[15658]: warning: transport smtp failure -- see a previous warning/fatal/panic logfile record for the problem description Jul 26 17:27:01 server08 postfix/bounce[15822]: running: PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;?echo where) | gdb /usr/lib/postfix/bounce 15822 2>&1?>/etc/postfix/bounce.15822.log & sleep 5 [2] Snapshot out of the smtp debug log: 0x0000002a962d18f7 in waitpid () from /lib64/tls/libc.so.6 (gdb) Hangup detected on fd 0 error detected on stdin Detaching from program: /usr/lib/postfix/smtp, process 29234

1 0

Re: [suse-amd64] 9.1 and ASUS L5800DF: pcmcia
by Sebastian Henschel 28 Jul '04

28 Jul '04

hi matt.. * "Matt T." <Matt(a)Boons.net> [2004-07-27 10:28 +0200]: > On Monday 26 July 2004 22:03, Sebastian Henschel wrote: > > > > unfortunately, i could not get pcmcia to work on an ASUS L5800DF with > > mobile athlon64. when i insert any pcmcia-card, i get: > > > > cs: unable to map card memory > > > > following the discussions at > > http://lists.infradead.org/pipermail/linux-pcmcia/2004-July/001000.html, > > i modified config.opts (attached). i get the following output when i > > insert e.g. a network card: > > > > Linux Kernel Card Services > > options: [pci] [cardbus] [pm] > > Yenta: CardBus bridge found at 0000:02:01.0 [1043:1854] > > Yenta: ISA IRQ mask 0x0098, PCI irq 9 > > Socket status: 30000006 > > Yenta: CardBus bridge found at 0000:02:01.1 [1043:1854] > > Yenta: ISA IRQ mask 0x0098, PCI irq 11 > > Socket status: 30000416 > > cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff > > cs: memory probe 0x60000000-0x60ffffff: excluding > > 0x60000000-0x60ffffff > > cs: memory probe 0xa0000000-0xa0ffffff: excluding > > 0xa0000000-0xa0ffffff > > cs: memory probe 0xf8a00000-0xf95ff000: excluding > > 0xf8a00000-0xf969dfff > > cs: unable to map card memory! > > cs: unable to map card memory! > > cs: unable to map card memory! > > cs: unable to map card memory! > > cs: unable to map card memory! > > cs: unable to map card memory! > > >=20 > I'm seeing the same on a HP zv5188ea. The HP and the Compaq presarios wit= h=20 > AMD64 seem to be almost identical, and all have this problem. Your asus s= eems=20 > also to have the nforce3, so I guess you have the same problem: >=20 > As a first step you might need to add a memory range to=20 > the /etc/pcmcia/config.opts file. [...] > Do a=20 > ~# /sbin/lspci -s 0:a.0 -vv > and check: >=20 > I/O behind bridge: ??? <- port to include > Memory behind bridge: ??? <- memory to include >=20 > to verify the values needed. >=20 > From your lspci I think you need to include >=20 > I/O behind bridge: 0000b000-0000dfff > Memory behind bridge: f8a00000-feafffff aha, i looked at the cardbus bridges and their window-/io-window. [...] > This step did make the error message dissappear in my hp, however it was = not=20 > enough to get the drivers loaded. the error message does not appear on that machine now, too. even the drivers load, but it seems unuseable. the driver of the network card spits out loads of "excess collisions", "transmitter busy", aso. the modem claims ttyS0/1 which are already used (by IrDA for instance). > This seems to be a kernel issue. I compiled vanilla 2.6.8-rc2, and now th= e=20 > device (here /dev/ttyxx) gets assigned to the pcmcia card.=20 >=20 > 2.6.7 might help also. BUT - you might loose your touchpad. SuSE has=20 > apparently included all to have notebooks with synaptics / alps touchpads= =20 > working, but if you use the vanilla kernel, you need to patch it yourself= =2E I=20 > can't tell yet how to do it, I'm still stuck in the middle of it. i am already 2.6.7 running with the latest ACPI patch. no problem with the touchpad. although i could not compile 0.3.13 from source, due to some incompatibilities when linking with Xext. but the driver shipped with suse 9.1 seems to work fine with X11. anyway, the user wants to have his machine, so he has to live with it for now. :) thanks, sebastian

1 0

globus-2.2.4 rpm
by Mikhail Kuzminsky 27 Jul '04

27 Jul '04

Hello, I'm trying to work w/globus-2.2.4-74.x86-64.rpm (taken from 8.2 beta) which I installed under SuSE Linux 9.0 (unfortunately last distributive do not have Globus rpm). The reasons were very simple: as I know, there are troubles to install Globus (from source) on Opteron. The GRIDftp problems in 2.2.4-74'rpm are not important for me currently. Some things I checked are working. But I didn't find gpt-build utility in any of binary RPM's for Globus/gpt ! I need gpt-build to install Simple CA package (which is unfortunately also absent in SuSE 8.2 rpm's). Sorry, do somebody install Simple CA on SuSE 9.0/Opteron ? I'm also interesting in any information about installations of Globus under SuSE 9.0; Globus 2 (2.2, 2.4) is more interesting for me than Globus 3. May be somebody have at least 32-bit Globus version in "working state" (of course, under SuSE Linux for Opteron) ? Yours Mikhail Kuzminsky Zelinsky Institute of Organic Chemistry Moscow

3 3

Athlon64 Laptop: Suspend to memory fails
by Cosmo King 27 Jul '04

27 Jul '04

Hey all. I have the Mitac 855 Athlon64 laptop and am trying to get suspend to memory working. All 2.6 kernels I've tried give similar failures with this machine. #echo 3 > /proc/acpi/sleep Stopping tasks: ====| hdc: start_power_step(step: 0) hdc: completing PM request, suspend hda: start_power_step(step: 0) hda: start_power_step(step: 1) hda: complete_power_step(step: 1, stat:50, err:0) hda: completing PM request, suspend PM: Entering state. general protection fault: 0000 [1] CPU 0 Pid: 854, comm: bash Not tainted 2.6.4-54.5-default RIP: 0010:[<ffffffff8018fde>] <ffffffff8018fde>{do_suspend_lowlevel+222} RSP: 0018:000001003f5dbe58 EFLAGS: 00010006 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff80118e30 RDI: 0000010000001000 RBP: 0000000000000003 R08: 00000000000f8000 R09: 000001003de99d38 R10: 000001003de99d28 R11: 0000000000008000 R12: 0000000000000000 R13: 0000000000000002 R14: 0000002a9556c000 R15: 0000000000000000 FS: 0000002a95d330a0(0000) GS:ffffffff804bd300(0000) knlgs:0000000000000000 CS: 0010 DS: 0018 ES: 0000 CR0: 000000008005003b CR2: 0000002a9556c000 CR3: 0000000000101000 CR4: 00000000000006e0 Process bash (pid: 854, stackpage=10037dc7a50) Stack: 0000000000000002 ffffffff8022407e 0000000000008000 0000000000000046 0000000000000000 0000000000000002 ffffffff8038eb70 ffffffff8014bed3 000001003e3bc560 0000000000000212 Call Trace:<ffffffff8022407e>{acpi_pm_enter+84} <ffffffff8014bed3>{enter_state+259} <ffffffff8022415a>{acpi_suspend+62} <ffffffff802245d8>{acpi_system_write_sleep+107} <ffffffff8016fe14>{vfs_write+228} <ffffffff8016ff39>{sys_write+73} <ffffffff801103a4>{system_call+124} Code: 0f 22 e0 48 8b 05 ca 18 2e 00 0f 22 d8 48 8b 05 b8 18 2e 00 RIP <ffffffff80118fde>{do_suspend_lowlevel+222} RSP <000001003f5dbe58> I've removed all modules possible, and the same result occurs, even in runlevel 1. dmesg says: Bootdata ok (command line is root=/dev/hda6 resume=/dev/hda2 nousb ide=nodma pci=biosirq pci=noacpi 1) Linux version 2.6.4-54.5-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Fri May 7 16:47:49 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fffffc0 (ACPI data) BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: have wakeup address 0x10000001000 No mptable found. No mptable found. No mptable found. No mptable found. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258032 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 PCI bridge 00:01 from 1106 found. Setting "noapic". Overwrite with "apic" ACPI: RSDP (v000 OID_00 ) @ 0x00000000000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x000000003fffcc40 ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x000000003ffffaa0 ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x000000003ffffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x000000003ffffbc0 ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x000000003ffffb30 ACPI: DSDT (v001 INSYDE K8T400 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Checking aperture... CPU 0: aperture @ b0000000 size 128 MB Built 1 zonelists Kernel command line: root=/dev/hda6 resume=/dev/hda2 nousb ide=nodma pci=biosirq pci=noacpi 1 console=tty0 ide_setup: ide=nodmaIDE: Prevented DMA PCI: Unknown option `biosirq' Initializing CPU#0 PID hash table entries: 16 (order 4: 256 bytes) CKRM Initialized time.c: Using 1.193182 MHz PIT timer. time.c: Detected 800.044 MHz processor. Console: colour VGA+ 80x25 Memory: 1028220k/1048512k available (2166k kernel code, 19536k reserved, 848k data, 172k init) Calibrating delay loop... 1576.96 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. Failure registering capabilities with the kernel selinux_register_security: Registering secondary module capability Capability LSM initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Looking for DSDT in initrd ...No customized DSDT found in initrd! CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 08 POSIX conformance testing by UNIFIX Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. do_initcalls init_elf32_binfmt init_elf_binfmt NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 No customized DSDT found! ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ... the first call_usermodehelper: pci_bus ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 14 15) PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3177] at 0000:00:11.0 PCI: IRQ 0 for device 0000:00:09.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:10.2 doesn't match PIRQ mask - try pci=usepirqmask agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 128M @ 0xb0000000 PCI-DMA: Disabling IOMMU. Simple Boot Flag at 0x37 set to 0x80 Initial HugeTLB pages allocated: 0 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 SELinux: Registering netfilter hooks Initializing Cryptographic API Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK4019GAX, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB), CHS=65535/16/63 hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 synaptics reset failed synaptics reset failed Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 37 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 Resume Machine: resuming from /dev/hda2 Resuming from device hda2 Resume Machine: This is normal swap space ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 14534 to 14575 (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 782 and revoked 0/2 blocks kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 172k freed Adding 2096472k swap on /dev/hda2. Priority:42 extents:1 EXT3 FS on hda6, internal journal md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm(a)uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. subfs 0.9 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: irq 11, pci mem ffffff000015f800 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.4-54.5-default ehci_hcd usb usb1: SerialNumber: 0000:00:10.3 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 11, io base 0000000000001200 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.4-54.5-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 10, io base 0000000000001300 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.4-54.5-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device 0000:00:10.2 (0000 -> 0001) PCI: IRQ 0 for device 0000:00:10.2 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin C of device 0000:00:10.2. Please try using pci=biosirq. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:10.2 setup! drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver serio: kseriod exiting drivers/usb/core/usb.c: deregistering driver hiddev drivers/usb/core/usb.c: deregistering driver hid uhci_hcd 0000:00:10.0: remove, state 1 usb usb2: USB disconnect, address 1 uhci_hcd 0000:00:10.0: USB bus 2 deregistered uhci_hcd 0000:00:10.1: remove, state 1 usb usb3: USB disconnect, address 1 uhci_hcd 0000:00:10.1: USB bus 3 deregistered ehci_hcd 0000:00:10.3: remove, state 1 usb usb1: USB disconnect, address 1 ehci_hcd 0000:00:10.3: USB bus 1 deregistered device-mapper: cleaned up drivers/usb/core/usb.c: deregistering driver usbfs drivers/usb/core/usb.c: deregistering driver hub by the way, suspend to disk works fine (although rather slow) any ideas? Thanks! Cosmo -- Cosmo King Systems Engineer Pogo Linux, Inc. 888.828.7646 cosmo*pogolinux*com

2 1

More SAMBA issues (new patch?)
by Brad Bourn 27 Jul '04

27 Jul '04

my samba share used to work correctly until yesterdays patch now, no matter what I do, the windows client can't set any file attributes. I'm really only interested in the "read only" for source control. I have, however, added inherit permissions = no map system = yes map hidden = yes map archive = yes create mask = 755 and NONE of it works. any ideas? B-)

1 0