August 2018 - openSUSE Security Announce

[security-announce] openSUSE-SU-2018:2242-1: important: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2242-1 Rating: important References: #1012382 #1037697 #1046299 #1046300 #1046302 #1046303 #1046305 #1046306 #1046307 #1046533 #1046543 #1050242 #1050536 #1050538 #1050540 #1051510 #1054245 #1056651 #1056787 #1058169 #1058659 #1060463 #1066110 #1068032 #1075087 #1075360 #1077338 #1077761 #1077989 #1085042 #1085536 #1085539 #1086301 #1086313 #1086314 #1086324 #1086457 #1087092 #1087202 #1087217 #1087233 #1090098 #1090888 #1091041 #1091171 #1093148 #1093666 #1094119 #1096330 #1097583 #1097584 #1097585 #1097586 #1097587 #1097588 #1098633 #1099193 #1100132 #1100884 #1101143 #1101337 #1101352 #1101465 #1101564 #1101669 #1101674 #1101789 #1101813 #1101816 #1102088 #1102097 #1102147 #1102340 #1102512 #1102851 #1103216 #1103220 #1103230 #1103356 #1103421 #1103517 #1103723 #1103724 #1103725 #1103726 #1103727 #1103728 #1103729 #1103730 Cross-References: CVE-2017-18344 CVE-2018-5390 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves two vulnerabilities and has 87 fixes is now available. Description: The openSUSE Leap 15.0 kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2018-5390 aka "SegmentSmack": A remote attacker even with relatively low bandwidth could have caused lots of CPU usage by triggering the worst case scenario during IP and/or TCP fragment reassembly (bsc#1102340) - CVE-2017-18344: The timer_create syscall implementation in kernel/time/posix-timers.c in the Linux kernel doesn't properly validate the sigevent->sigev_notify field, which leads to out-of-bounds access in the show_timer function (called when /proc/$PID/timers is read). This allowed userspace applications to read arbitrary kernel memory (on a kernel built with CONFIG_POSIX_TIMERS and CONFIG_CHECKPOINT_RESTORE) (bnc#1102851). The following non-security bugs were fixed: - acpi, APEI, EINJ: Subtract any matching Register Region from Trigger resources (bsc#1051510). - acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value (bsc#1051510). - acpi, nfit: Fix scrub idle detection (bsc#1094119). - acpi / processor: Finish making acpi_processor_ppc_has_changed() void (bsc#1051510). - ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS (bsc#1051510). - alsa: emu10k1: add error handling for snd_ctl_add (bsc#1051510). - alsa: emu10k1: Rate-limit error messages about page errors (bsc#1051510). - alsa: fm801: add error handling for snd_ctl_add (bsc#1051510). - alsa: hda: add mute led support for HP ProBook 455 G5 (bsc#1051510). - alsa: hda - Handle pm failure during hotplug (bsc#1051510). - alsa: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk (bsc#1051510). - alsa: hda/realtek - two more lenovo models need fixup of MIC_LOCATION (bsc#1051510). - alsa: hda/realtek - Yet another Clevo P950 quirk entry (bsc#1101143). - alsa: rawmidi: Change resized buffers atomically (bsc#1051510). - alsa: usb-audio: Apply rate limit to warning messages in URB complete callback (bsc#1051510). - alx: take rtnl before calling __alx_open from resume (bsc#1051510). - arm64: Correct type for PUD macros (bsc#1103723). - arm64: Disable unhandled signal log messages by default (bsc#1103724). - arm64: kpti: Use early_param for kpti= command-line option (bsc#1103220). - arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one (bsc#1103725). - arm64: mm: Fix set_memory_valid() declaration (bsc#1103726). - arm64: perf: correct PMUVer probing (bsc#1103727). - arm64: ptrace: Avoid setting compat FPR to garbage if get_user fails (bsc#1103728). - arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics (bsc#1103729). - arm64: vdso: fix clock_getres for 4GiB-aligned res (bsc#1103730). - arm: module: fix modsign build error (bsc#1093666). - ASoC: dpcm: fix BE dai not hw_free and shutdown (bsc#1051510). - ASoC: mediatek: preallocate pages use platform device (bsc#1051510). - ASoC: topology: Add missing clock gating parameter when parsing hw_configs (bsc#1051510). - ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format() (bsc#1051510). - ath9k_htc: Add a sanity check in ath9k_htc_ampdu_action() (bsc#1051510). - ath: Add regulatory mapping for APL13_WORLD (bsc#1051510). - ath: Add regulatory mapping for APL2_FCCA (bsc#1051510). - ath: Add regulatory mapping for Bahamas (bsc#1051510). - ath: Add regulatory mapping for Bermuda (bsc#1051510). - ath: Add regulatory mapping for ETSI8_WORLD (bsc#1051510). - ath: Add regulatory mapping for FCC3_ETSIC (bsc#1051510). - ath: Add regulatory mapping for Serbia (bsc#1051510). - ath: Add regulatory mapping for Tanzania (bsc#1051510). - ath: Add regulatory mapping for Uganda (bsc#1051510). - atl1c: reserve min skb headroom (bsc#1051510). - audit: ensure that 'audit=1' actually enables audit for PID 1 (bsc#1051510). - audit: Fix wrong task in comparison of session ID (bsc#1051510). - audit: return on memory error to avoid null pointer dereference (bsc#1051510). - b44: Initialize 64-bit stats seqcount (bsc#1051510). - backlight: as3711_bl: Fix Device Tree node leaks (bsc#1051510). - backlight: lm3630a: Bump REG_MAX value to 0x50 instead of 0x1F (bsc#1051510). - backlight: pwm_bl: Do not use GPIOF_* with gpiod_get_direction (bsc#1051510). - batman-adv: Accept only filled wifi station info (bsc#1051510). - batman-adv: Always initialize fragment header priority (bsc#1051510). - batman-adv: Avoid race in TT TVLV allocator helper (bsc#1051510). - batman-adv: Avoid storing non-TT-sync flags on singular entries too (bsc#1051510). - batman-adv: Fix bat_ogm_iv best gw refcnt after netlink dump (bsc#1051510). - batman-adv: Fix bat_v best gw refcnt after netlink dump (bsc#1051510). - batman-adv: Fix check of retrieved orig_gw in batadv_v_gw_is_eligible (bsc#1051510). - batman-adv: Fix debugfs path for renamed hardif (bsc#1051510). - batman-adv: Fix debugfs path for renamed softif (bsc#1051510). - batman-adv: fix header size check in batadv_dbg_arp() (bsc#1051510). - batman-adv: Fix internal interface indices types (bsc#1051510). - batman-adv: Fix lock for ogm cnt access in batadv_iv_ogm_calc_tq (bsc#1051510). - batman-adv: Fix multicast packet loss with a single WANT_ALL_IPV4/6 flag (bsc#1051510). - batman-adv: fix multicast-via-unicast transmission with AP isolation (bsc#1051510). - batman-adv: Fix netlink dumping of BLA backbones (bsc#1051510). - batman-adv: Fix netlink dumping of BLA claims (bsc#1051510). - batman-adv: fix packet checksum in receive path (bsc#1051510). - batman-adv: fix packet loss for broadcasted DHCP packets to a server (bsc#1051510). - batman-adv: Fix skbuff rcsum on packet reroute (bsc#1051510). - batman-adv: fix TT sync flag inconsistencies (bsc#1051510). - batman-adv: Fix TT sync flags for intermediate TT responses (bsc#1051510). - batman-adv: Ignore invalid batadv_iv_gw during netlink send (bsc#1051510). - batman-adv: Ignore invalid batadv_v_gw during netlink send (bsc#1051510). - batman-adv: invalidate checksum on fragment reassembly (bsc#1051510). - batman-adv: update data pointers after skb_cow() (bsc#1051510). - batman-adv: Use default throughput value on cfg80211 error (bsc#1051510). - blk-mq: count allocated but not started requests in iostats inflight (bsc#1077989). - blk-mq: fix sysfs inflight counter (bsc#1077989). - block: always set partition number to '0' in blk_partition_remap() (bsc#1054245). - block: always set partition number to '0' in blk_partition_remap() (bsc#1077989). - block: bio_check_eod() needs to consider partitions (bsc#1077989). - block: fail op_is_write() requests to read-only partitions (bsc#1077989). - block: pass 'run_queue' to blk_mq_request_bypass_insert (bsc#1077989). - block: set request_list for request (bsc#1077989). - bluetooth: avoid recursive locking in hci_send_to_channel() (bsc#1051510). - bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011 (bsc#1051510). - bluetooth: btusb: add ID for LiteOn 04ca:301a (bsc#1051510). - bluetooth: hci_ll: Add support for the external clock (bsc#1051510). - bluetooth: hci_ll: Fix download_firmware() return when __hci_cmd_sync fails (bsc#1051510). - bluetooth: hci_nokia: select BT_HCIUART_H4 (bsc#1051510). - bluetooth: hci_qca: Fix "Sleep inside atomic section" warning (bsc#1051510). - bluetooth: hci_uart: fix kconfig dependency (bsc#1051510). - bnxt_en: Always set output parameters in bnxt_get_max_rings() (bsc#1050242). - bnxt_en: Do not modify max IRQ count after rdma driver requests/frees IRQs (bsc#1050242). - bnxt_en: Fix for system hang if request_irq fails (bsc#1050242 ). - bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic (bsc#1050242 ). - bnxt_en: Fix the vlan_tci exact match check (bsc#1050242 ). - bonding: re-evaluate force_primary when the primary slave name changes (networking-stable-18_06_20). - brcmfmac: Add support for bcm43364 wireless chipset (bsc#1051510). - btrfs: Do not remove block group still has pinned down bytes (bsc#1086457). - bus: arm-cci: Fix use of smp_processor_id() in preemptible context (bsc#1051510). - bus: arm-ccn: Check memory allocation failure (bsc#1051510). - bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left (bsc#1051510). - bus: arm-ccn: Fix use of smp_processor_id() in preemptible context (bsc#1051510). - can: bcm: check for null sk before deferencing it via the call to sock_net (bsc#1051510). - can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before checking can.ctrlmode (bsc#1051510). - can: mpc5xxx_can: check of_iomap return before use (bsc#1051510). - can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr only (bsc#1051510). - can: xilinx_can: fix device dropping off bus on RX overrun (bsc#1051510). - can: xilinx_can: fix incorrect clear of non-processed interrupts (bsc#1051510). - can: xilinx_can: fix power management handling (bsc#1051510). - can: xilinx_can: fix recovery from error states not being propagated (bsc#1051510). - can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK (bsc#1051510). - can: xilinx_can: fix RX overflow interrupt not being enabled (bsc#1051510). - can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting (bsc#1051510). - cdc_ncm: avoid padding beyond end of skb (networking-stable-18_06_20). - cfg80211: initialize sinfo in cfg80211_get_station (bsc#1051510). - checkpatch: add 6 missing types to --list-types (bsc#1051510). - cifs: do not allow creating sockets except with SMB1 posix exensions (bsc#1102097). - cifs: Fix infinite loop when using hard mount option (bsc#1091171). - clk: at91: fix clk-generated parenting (bsc#1051510). - clk: at91: PLL recalc_rate() now using cached MUL and DIV values (bsc#1051510). - clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() (bsc#1051510). - clk: bcm2835: De-assert/assert PLL reset signal when appropriate (bsc#1051510). - clk: Do not show the incorrect clock phase (bsc#1051510). - clk: Do not write error code into divider register (bsc#1051510). - clk: fix false-positive Wmaybe-uninitialized warning (bsc#1051510). - clk: fix mux clock documentation (bsc#1051510). - clk: Fix __set_clk_rates error print-string (bsc#1051510). - clk: fix set_rate_range when current rate is out of range (bsc#1051510). - clk: hi3660: fix incorrect uart3 clock freqency (bsc#1051510). - clk: hi6220: change watchdog clock source (bsc#1051510). - clk: hi6220: mark clock cs_atb_syspll as critical (bsc#1051510). - clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() (bsc#1051510). - clk: hisilicon: mark wdt_mux_p[] as const (bsc#1051510). - clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux (bsc#1051510). - clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU (bsc#1051510). - clk: imx7d: fix mipi dphy div parent (bsc#1051510). - clk: mediatek: add the option for determining PLL source clock (bsc#1051510). - clk: mediatek: mark mtk_infrasys_init_early __init (bsc#1051510). - clk: meson: gxbb: fix clk_mclk_i958 divider flags (bsc#1051510). - clk: meson: gxbb: fix meson cts_amclk divider flags (bsc#1051510). - clk: meson: gxbb: fix wrong clock for SARADC/SANA (bsc#1051510). - clk: meson: meson8b: fix protection against undefined clks (bsc#1051510). - clk: meson: mpll: fix mpll0 fractional part ignored (bsc#1051510). - clk: meson: mpll: use 64-bit maths in params_from_rate (bsc#1051510). - clk: meson: remove unnecessary rounding in the pll clock (bsc#1051510). - clk: mvebu: use correct bit for 98DX3236 NAND (bsc#1051510). - clk: qcom: Base rcg parent rate off plan frequency (bsc#1051510). - clk: qcom: clk-smd-rpm: Fix the reported rate of branches (bsc#1051510). - clk: qcom: common: fix legacy board-clock registration (bsc#1051510). - clk: qcom: msm8916: Fix bimc gpu clock ops (bsc#1051510). - clk: qcom: msm8916: fix mnd_width for codec_digcodec (bsc#1051510). - clk: renesas: div6: Document fields used for parent selection (bsc#1051510). - clk: renesas: r8a7745: Remove nonexisting scu-src[0789] clocks (bsc#1051510). - clk: renesas: r8a7745: Remove PLL configs for MD19=0 (bsc#1051510). - clk: renesas: r8a7795: Correct pwm, gpio, and i2c parent clocks on ES2.0 (bsc#1051510). - clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 (bsc#1051510). - clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 (bsc#1051510). - clk: rockchip: Prevent calculating mmc phase if clock rate is zero (bsc#1051510). - clk: samsung: exynos3250: Fix PLL rates (bsc#1051510). - clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices (bsc#1051510). - clk: samsung: exynos5250: Fix PLL rates (bsc#1051510). - clk: samsung: exynos5260: Fix PLL rates (bsc#1051510). - clk: samsung: exynos5433: Fix PLL rates (bsc#1051510). - clk: samsung: exynos7: Fix PLL rates (bsc#1051510). - clk: samsung: Fix m2m scaler clock on Exynos542x (bsc#1051510). - clk: samsung: s3c2410: Fix PLL rates (bsc#1051510). - clk: scpi: error when clock fails to register (bsc#1051510). - clk: scpi: fix return type of __scpi_dvfs_round_rate (bsc#1051510). - clk: si5351: fix PLL reset (bsc#1051510). - clk: si5351: Rename internal plls to avoid name collisions (bsc#1051510). - clk: socfpga: Fix the smplsel on Arria10 and Stratix10 (bsc#1051510). - clk: sunxi: fix build warning (bsc#1051510). - clk: sunxi: fix uninitialized access (bsc#1051510). - clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops (bsc#1051510). - clk: sunxi-ng: add CLK_SET_RATE_PARENT flag to H3 GPU clock (bsc#1051510). - clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs (bsc#1051510). - clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3 (bsc#1051510). - clk: sunxi-ng: Fix fractional mode for N-M clocks (bsc#1051510). - clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change (bsc#1051510). - clk: sunxi-ng: Make fractional helper less chatty (bsc#1051510). - clk: sunxi-ng: multiplier: Fix fractional mode (bsc#1051510). - clk: sunxi-ng: nm: Check if requested rate is supported by fractional clock (bsc#1051510). - clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider (bsc#1051510). - clk: sunxi-ng: sun6i: Export video PLLs (bsc#1051510). - clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision (bsc#1051510). - clk: sunxi-ng: Wait for lock when using fractional mode (bsc#1051510). - clk: tegra: Fix cclk_lp divisor register (bsc#1051510). - clk: tegra: Fix pll_u rate configuration (bsc#1051510). - clk: tegra: Use readl_relaxed_poll_timeout_atomic() in tegra210_clock_init() (bsc#1051510). - clk: ti: dra7-atl-clock: fix child-node lookups (bsc#1051510). - clk: uniphier: fix DAPLL2 clock rate of Pro5 (bsc#1051510). - clk: x86: Do not gate clocks enabled by the firmware (bsc#1051510). - clockevents/drivers/cs5535: Improve resilience to spurious interrupts (bsc#1051510). - clocksource/drivers/stm32: Fix kernel panic with multiple timers (bsc#1051510). - cnic: Fix an error handling path in 'cnic_alloc_bnx2x_resc()' (bsc#1086324). - cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path (bsc#1100884). - cpufreq: CPPC: Initialize shared perf capabilities of CPUs (bsc#1100884). - cpufreq: docs: Add missing cpuinfo_cur_freq description (bsc#1051510). - cpufreq: docs: Drop intel-pstate.txt from index.txt (bsc#1051510). - cpufreq: Fix new policy initialization during limits updates via sysfs (bsc#1100884). - cpufreq: governors: Fix long idle detection logic in load calculation (bsc#1100884). - cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms (bsc#1066110). - cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt (bsc#1100884). - cpuidle: powernv: Fix promotion from snooze if next state disabled (bsc#1100884). - crash_dump: is_kdump_kernel can be boolean (bsc#1103230). - crypto: caam/qi - explicitly set dma_ops (bsc#1051510). - crypto: ccp - remove unused variable qim (bsc#1051510). - crypto: change transient busy return code to -ENOSPC (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Add authenc versions of ctr and sha (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Check error code with IS_ERR macro (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - check for sg null (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - do not leak pointers to authenc keys (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix an error code in chcr_hash_dma_map() (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix Indentation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix indentation warning (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix iv passed in fallback path for rfc3686 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix IV updated in XTS operation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Fix src buffer dma length (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Make function aead_ccm_validate_input static (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Remove allocation of sg list to implement 2K limit of dsgl header (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Remove dst sg size zero check (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Remove unused parameter (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Update IV before sending request to HW (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Use kernel round function to align lengths (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: chelsio - Use x8_ble gf multiplication to calculate IV (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak (bsc#1051510). - crypto: crypto4xx - remove bad list_del (bsc#1051510). - crypto: gf128mul - The x8_ble multiplication functions (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - crypto: sha512-mb - add some missing unlock on error (bsc#1051510). - cxgb4: Add FORCE_PAUSE bit to 32 bit port caps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add HMA support (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add new T5 device id (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: add new T5 device id's (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add new T6 device ids (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Adds CPL support for Shared Receive Queues (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add support for ethtool i2c dump (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add support to initialise/read SRQ entries (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add support to query HW SRQ parameters (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Add TP Congestion map entry for single-port (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: avoid schedule while atomic (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: change the port capability bits definition (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Check alignment constraint for T6 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Check for kvzalloc allocation failure (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: clean up init_one (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: collect hardware dump in second kernel (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: collect SGE PF/VF queue map (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: copy adap index to PF0-3 adapter instances (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: copy mbox log size to PF0-3 adap instances (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: copy the length of cpl_tx_pkt_core to fw_wr (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: copy vlan_id in ndo_get_vf_config (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4/cxgb4vf: add support for ndo_set_vf_vlan (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4/cxgb4vf: check fw caps to set link mode mask (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4/cxgb4vf: link management changes for new SFP (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4/cxgb4vf: Notify link changes to OS-dependent code (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: depend on firmware event for link status (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: do L1 config when module is inserted (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: do not display 50Gbps as unsupported speed (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: do not fail vf instatiation in slave mode (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: do not set needs_free_netdev for mgmt dev's (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: enable inner header checksum calculation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: enable ZLIB_DEFLATE when building cxgb4 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Fix error handling path in 'init_one()' (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Fix queue free path of ULD drivers (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: fix the wrong conversion of Mbps to Kbps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Fix {vxlan/geneve}_port initialization (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: free up resources of pf 0-3 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: increase max tx rate limit to 100 Gbps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: IPv6 filter takes 2 tids (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: notify fatal error to uld drivers (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: remove dead code when allocating filter (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: restructure VF mgmt code (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: rework on-chip memory read (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Setup FW queues before registering netdev (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Support firmware rdma write completion work request (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: Support firmware rdma write with immediate work request (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: support new ISSI flash parts (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: update dump collection logic to use compression (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: update LE-TCAM collection for T6 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: use CLIP with LIP6 on T6 for TCAM filters (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: use zlib deflate to compress firmware dump (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4vf: display pause settings (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4vf: Forcefully link up virtual interfaces (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgb4: zero the HMA memory (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - cxgbit: call neigh_event_send() to update MAC address (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - dccp: do not free ccid2_hc_tx_sock struct in dccp_disconnect() (networking-stable-18_06_08). - device property: Allow iterating over available child fwnodes (bsc#1098633). - device property: Introduce fwnode_call_bool_op() for ops that return bool (bsc#1098633). - device property: Introduce fwnode_device_is_available() (bsc#1098633). - device property: Introduce fwnode_get_mac_address() (bsc#1098633). - device property: Introduce fwnode_get_phy_mode() (bsc#1098633). - device property: Introduce fwnode_irq_get() (bsc#1098633). - device property: Move fwnode graph ops to firmware specific locations (bsc#1098633). - device property: Move FW type specific functionality to FW specific files (bsc#1098633). - device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent() (bsc#1098633). - dmaengine: fsl-edma: disable clks on all error paths (bsc#1051510). - dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() (bsc#1051510). - dmaengine: mv_xor_v2: Fix clock resource by adding a register clock (bsc#1051510). - dmaengine: omap-dma: port_window support correction for both direction (bsc#1051510). - dmaengine: pl330: fix a race condition in case of threaded irqs (bsc#1051510). - dmaengine: pl330: report BURST residue granularity (bsc#1051510). - dmaengine: qcom: bam_dma: get num-channels and num-ees from dt (bsc#1051510). - dmaengine: qcom_hidma: check pending interrupts (bsc#1051510). - dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue() (bsc#1051510). - dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3 (bsc#1051510). - dmaengine: tegra210-adma: fix of_irq_get() error check (bsc#1051510). - dmaengine: tegra-apb: Really fix runtime-pm usage (bsc#1051510). - dmaengine: xilinx_dma: Fix error code format specifier (bsc#1051510). - dmaengine: zynqmp_dma: Fix race condition in the probe (bsc#1051510). - doc: Rename .system_keyring to .builtin_trusted_keys (bsc#1051510). - doc: SKB_GSO_[IPIP|SIT] have been replaced (bsc#1051510). - docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters (bsc#1051510). - docs: segmentation-offloads.txt: Fix ref to SKB_GSO_TUNNEL_REMCSUM (bsc#1051510). - documentation: admin-guide: intel_pstate: Fix sysfs path (bsc#1051510). - dp83640: Ensure against premature access to PHY registers after reset (bsc#1051510). - drbd: fix access after free (bsc#1051510). - driver core: Fix link to device power management documentation (bsc#1051510). - driver core: Partially revert "driver core: correct device's shutdown order" (bsc#1051510). - drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() (bsc#1051510). - drivers/net/ethernet/qlogic/qed: Fix __qed_spq_block() ordering (bsc#1086314 bsc#1086313 bsc#1086301 ). - drivers: net: i40evf: use setup_timer() helper (bsc#1101816 ). - drivers: soc: sunxi: fix error processing on base address when claiming (bsc#1051510). - drm: Add DP PSR2 sink enable bit (bsc#1051510). - drm/amdgpu: Remove VRAM from shared bo domains (bsc#1051510). - drm/atomic: Check old_plane_state->crtc in drm_atomic_helper_async_check() (bsc#1051510). - drm/atomic: Handling the case when setting old crtc for plane (bsc#1051510). - drm/atomic-helper: Drop plane->fb references only for drm_atomic_helper_shutdown() (bsc#1051510). - drm/atomic: Initialize variables in drm_atomic_helper_async_check() to make gcc happy (bsc#1051510). - drm/atomic: Make async plane update checks work as intended, v2 (bsc#1051510). - drm/bridge/sii8620: fix potential buffer overflow (bsc#1051510). - drm/dp/mst: Fix off-by-one typo when dump payload table (bsc#1051510). - drm/exynos: Fix dma-buf import (bsc#1051510). - drm/gma500: fix psb_intel_lvds_mode_valid()'s return type (bsc#1051510). - drm/i915/dp: Send DPCD ON for MST before phy_up (bsc#1051510). - drm/i915: Fix hotplug irq ack on i965/g4x (bsc#1051510). - drm/i915: Only call tasklet_kill() on the first prepare_reset (bsc#1051510). - drm: mali-dp: Uninitialized variable in malidp_se_check_scaling() (bsc#1087092). - drm/nouveau: Avoid looping through fake MST connectors (bsc#1051510). - drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit() (bsc#1090888). - drm/nouveau/fifo/gk104-: poll for runlist update completion (bsc#1051510). - drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply() (bsc#1051510). - drm/nouveau: Use drm_connector_list_iter_* for iterating connectors (bsc#1051510). - drm/radeon: fix mode_valid's return type (bsc#1051510). - drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3 (bsc#1085539). - drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structure (bsc#1085539). - drm: re-enable error handling (bsc#1051510). - drm/rockchip: analogix_dp: Remove unnecessary init code (bsc#1085536). - drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() (bsc#1087092). - drm/rockchip: Fix build warning in analogix_dp-rockchip.c (bsc#1085536). - drm/rockchip: inno_hdmi: Fix error handling path (bsc#1087092). - drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind (bsc#1087092). - drm/tegra: Acquire a reference to the IOVA cache (bsc#1090888). - drm/udl: fix display corruption of the last line (bsc#1101337). - drm: Use kvzalloc for allocating blob property memory (bsc#1101352). - drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formats (bsc#1051510). - dvb_frontend: do not use-after-free the frontend struct (bsc#1051510). - efi/efi_test: Prevent an Oops in efi_runtime_query_capsulecaps() (bsc#1051510). - enic: do not overwrite error code (bsc#1037697). - enic: enable rq before updating rq descriptors (bsc#1037697). - enic: set DMA mask to 47 bit (networking-stable-18_06_08). - ethtool: add ethtool_intersect_link_masks (bsc#1101816 ). - firewire: net: max MTU off by one (bsc#1051510). - firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set (bsc#1051510). - firmware: dmi: Optimize dmi_matches (bsc#1051510). - firmware: tegra: Fix locking bugs in BPMP (bsc#1051510). - Fix English in description of GCC_PLUGIN_STRUCTLEAK (bsc#1051510). - Fix kABI breakage for of/device change (bsc#1051510). - fix kabi due to perf_event.h uapi field change (). - Fix kABI for rtl_deinit_deferred_work() rewrite (bsc#1051510). - fix Patch-mainline header - fm10k: add missing fall through comment (bsc#1101813 ). - fm10k: avoid divide by zero in rare cases when device is resetting (bsc#1101813). - fm10k: avoid needless delay when loading driver (bsc#1101813 ). - fm10k: avoid possible truncation of q_vector->name (bsc#1101813 ). - fm10k: bump version number (bsc#1101813). - fm10k: bump version number (bsc#1101813). - fm10k: clarify action when updating the VLAN table (bsc#1101813 ). - fm10k: cleanup unnecessary parenthesis in fm10k_iov.c (bsc#1101813). - fm10k: correct typo in fm10k_pf.c (bsc#1101813). - fm10k: do not assume VLAN 1 is enabled (bsc#1101813). - fm10k: do not loop while resetting VFs due to VFLR event (bsc#1101813). - fm10k: do not protect fm10k_queue_mac_request by fm10k_host_mbx_ready (bsc#1101813). - fm10k: Fix configuration for macvlan offload (bsc#1101813 ). - fm10k: fix "failed to kill vid" message for VF (bsc#1101813 ). - fm10k: fix function doxygen comments (bsc#1101813). - fm10k: fix incorrect warning for function prototype (bsc#1101813 ). - fm10k: Fix misuse of net_ratelimit() (bsc#1101813). - fm10k: fix typos on fall through comments (bsc#1101813 ). - fm10k: introduce a message queue for MAC/VLAN messages (bsc#1101813). - fm10k: mark PM functions as __maybe_unused (bsc#1101813 ). - fm10k: move fm10k_prepare_for_reset and fm10k_handle_reset (bsc#1101813). - fm10k: prefer %s and __func__ for diagnostic prints (bsc#1101813 ). - fm10k: prepare_for_reset() when we lose PCIe Link (bsc#1101813 ). - fm10k: prevent race condition of __FM10K_SERVICE_SCHED (bsc#1101813). - fm10k: reduce duplicate fm10k_stat macro code (bsc#1101813 ). - fm10k: reschedule service event if we stall the PF<->SM mailbox (bsc#1101813). - fm10k: setup VLANs for l2 accelerated macvlan interfaces (bsc#1101813). - fm10k: simplify reading PFVFLRE register (bsc#1101813 ). - fm10k: stop adding VLAN 0 to the VLAN table (bsc#1101813 ). - fm10k: stop spurious link down messages when Tx FIFO is full (bsc#1101813). - fm10k: use generic PM hooks instead of legacy PCIe power hooks (bsc#1101813). - fm10k: use macro to avoid passing the array and size separately (bsc#1101813). - fm10k: Use seq_putc() in fm10k_dbg_desc_break() (bsc#1101813 ). - fm10k: use spinlock to implement mailbox lock (bsc#1101813 ). - fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN requests (bsc#1101813). - fm10k: use variadic arguments to fm10k_add_stat_strings (bsc#1101813). - fm10k: warn if the stat size is unknown (bsc#1101813 ). - fsi: core: register with postcore_initcall (bsc#1051510). - fuse: atomic_o_trunc should truncate pagecache (bsc#1051510). - fuse: do not keep dead fuse_conn at fuse_fill_super() (bsc#1051510). - fuse: fix congested state leak on aborted connections (bsc#1051510). - fuse: fix control dir setup and teardown (bsc#1051510). - fuse: Remove the buggy retranslation of pids in fuse_dev_do_read (bsc#1051510). - genirq: Check __free_irq() return value for NULL (bsc#1103517). - gpio: acpi: work around false-positive -Wstring-overflow warning (bsc#1051510). - gpio: brcmstb: allow all instances to be wakeup sources (bsc#1051510). - gpio: brcmstb: check return value of gpiochip_irqchip_add() (bsc#1051510). - gpio: brcmstb: correct the configuration of level interrupts (bsc#1051510). - gpio: brcmstb: release the bgpio lock during irq handlers (bsc#1051510). - gpio: brcmstb: switch to handle_level_irq flow (bsc#1051510). - gpio: pca953x: fix vendor prefix for PCA9654 (bsc#1051510). - gpio: reject invalid gpio before getting gpio_desc (bsc#1051510). - gpio: tegra: fix unbalanced chained_irq_enter/exit (bsc#1051510). - gpu: host1x: Acquire a reference to the IOVA cache (bsc#1090888). - hid: hid-plantronics: Re-resend Update to map button for PTT products (bsc#1051510). - hid: i2c-hid: check if device is there before really probing (bsc#1051510). - hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close (bsc#1051510). - hwmon: (aspeed-pwm) add THERMAL dependency (bsc#1051510). - hwmon: Deal with errors from the thermal subsystem (bsc#1051510). - hwmon: (ftsteutates) Fix clearing alarm sysfs entries (bsc#1051510). - hwmon: (ltc2990) Fix incorrect conversion of negative temperatures (bsc#1051510). - hwmon: (nct6683) Enable EC access if disabled at boot (bsc#1051510). - hwmon: (stts751) buffer overrun on wrong chip configuration (bsc#1051510). - hwmon: (tmp102) Fix first temperature reading (bsc#1051510). - hwrng: stm32 - add reset during probe (bsc#1051510). - i2c: axxia: enable clock before calling clk_get_rate() (bsc#1051510). - i2c: designware: Round down ACPI provided clk to nearest supported clk (bsc#1051510). - i2c: mux: pinctrl: mention correct module name in Kconfig help text (bsc#1051510). - i2c: tegra: Fix NACK error handling (bsc#1051510). - i40e: Add advertising 10G LR mode (bsc#1101816). - i40e: add check for return from find_first_bit call (bsc#1101816 ). - i40e: Add delay after EMP reset for firmware to recover (bsc#1101816). - i40e: add doxygen comment for new mode parameter (bsc#1101816 ). - i40e: add function doc headers for ethtool stats functions (bsc#1101816). - i40e: add function header for i40e_get_rxfh (bsc#1101816 ). - i40e: add helper conversion function for link_speed (bsc#1101816 ). - i40e: Add infrastructure for queue channel support (bsc#1101816 ). - i40e: Add macro for PF reset bit (bsc#1101816). - i40e: Add new PHY types for 25G AOC and ACC support (bsc#1101816 ). - i40e: Add returning AQ critical error to SW (bsc#1101816 ). - i40e: Add support for 'ethtool -m' (bsc#1101816). - i40e: add tx_busy to ethtool stats (bsc#1101816). - i40e: allow XPS with QoS enabled (bsc#1101816). - i40e: always return all queue stat strings (bsc#1101816 ). - i40e: always return VEB stat strings (bsc#1101816). - i40e: avoid divide by zero (bsc#1101816). - i40e: avoid overflow in i40e_ptp_adjfreq() (bsc#1101816 ). - i40e: broadcast filters can trigger overflow promiscuous (bsc#1101816). - i40e: calculate ethtool stats size in a separate function (bsc#1101816). - i40e: change flags to use 64 bits (bsc#1101816). - i40e: change ppp name to ddp (bsc#1101816). - i40e: check for invalid DCB config (bsc#1101816). - i40e: Cleanup i40e_vlan_rx_register (bsc#1101816). - i40e: cleanup unnecessary parens (bsc#1101816). - i40e: cleanup whitespace for some ethtool stat definitions (bsc#1101816). - i40e: cleanup wording in a header comment (bsc#1101816 ). - i40e: convert i40e_get_settings_link_up to new API (bsc#1101816 ). - i40e: convert i40e_phy_type_to_ethtool to new API (bsc#1101816 ). - i40e: convert i40e_set_link_ksettings to new API (bsc#1101816 ). - i40e: Delete an error message for a failed memory allocation in i40e_init_interrupt_scheme() (bsc#1101816). - i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events (bsc#1101816). - i40e: disallow programming multiple filters with same criteria (bsc#1101816). - i40e: Display error message if module does not meet thermal requirements (bsc#1101816). - i40e: display priority_xon and priority_xoff stats (bsc#1101816 ). - i40e: do not clear suspended state until we finish resuming (bsc#1101816). - i40e: do not enter PHY debug mode while setting LEDs behaviour (bsc#1101816). - i40e: do not force filter failure in overflow promiscuous (bsc#1101816). - i40e: do not hold spinlock while resetting VF (bsc#1101816 ). - i40e: do not leak memory addresses (bsc#1101816). - i40e: drop i40e_pf *pf from i40e_vc_disable_vf() (bsc#1101816 ). - i40e: Enable VF to negotiate number of allocated queues (bsc#1101816). - i40e: ensure reset occurs when disabling VF (bsc#1101816 ). - i40e: factor out re-enable functions for ATR and SB (bsc#1101816 ). - i40e: Fix a potential NULL pointer dereference (bsc#1101816 ). - i40e: fix a typo (bsc#1101816). - i40e: fix a typo in i40e_pf documentation (bsc#1101816 ). - i40e: fix clearing link masks in i40e_get_link_ksettings (bsc#1101816). - i40e: fix comment typo (bsc#1101816). - i40e: fix flags declaration (bsc#1101816). - i40e: Fix FLR reset timeout issue (bsc#1101816). - i40e: Fix for adding multiple ethtool filters on the same location (bsc#1101816). - i40e: Fix for blinking activity instead of link LEDs (bsc#1101816). - i40e: fix for flow director counters not wrapping as expected (bsc#1101816). - i40e: Fix for NUP NVM image downgrade failure (bsc#1101816 ). - i40e: fix for wrong partition id calculation on OCP mezz cards (bsc#1101816). - i40e: fix handling of vf_states variable (bsc#1101816 ). - i40e: fix i40e_phy_type_to_ethtool function header (bsc#1101816 ). - i40e: fix incorrect register definition (bsc#1101816). - i40e: Fix kdump failure (bsc#1101816). - i40e: Fix link down message when interface is brought up (bsc#1101816). - i40e: fix link reporting (bsc#1101816). - i40e: fix merge error (bsc#1101816). - i40e: Fix multiple issues with UDP tunnel offload filter configuration (bsc#1101816). - i40e: Fix permission check for VF MAC filters (bsc#1101816 ). - i40e: fix reading LLDP configuration (bsc#1101816). - i40e: Fix recalculation of MSI-X vectors for VMDq (bsc#1101816 ). - i40e: Fix reporting of supported link modes (bsc#1101816 ). - i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATE (bsc#1101816). - i40e: fix typo in function description (bsc#1101816). - i40e: Fix unqualified module message while bringing link up (bsc#1101816). - i40e: fix whitespace issues in i40e_ethtool.c (bsc#1101816 ). - i40e: fold prefix strings directly into stat names (bsc#1101816 ). - i40e: free skb after clearing lock in ptp_stop (bsc#1101816 ). - i40e: free the skb after clearing the bitlock (bsc#1101816 ). - i40e: group autoneg PHY types together (bsc#1101816). - i40e: hold the RTNL lock while changing interrupt schemes (bsc#1101816). - i40e/i40evf: Add support for new mechanism of updating adaptive ITR (bsc#1101816). - i40e/i40evf: always set the CLEARPBA flag when re-enabling interrupts (bsc#1101816). - i40e/i40evf: Bump driver versions (bsc#1101816). - i40e/i40evf: bundle more descriptors when allocating buffers (bsc#1101816). - i40e/i40evf: cleanup incorrect function doxygen comments (bsc#1101816). - i40e/i40evf: Clean up logic for adaptive ITR (bsc#1101816 ). - i40e/i40evf: Clean-up of bits related to using q_vector->reg_idx (bsc#1101816). - i40e/i40evf: Detect and recover hung queue scenario (bsc#1101816 ). - i40e/i40evf: Do not bother setting the CLEARPBA bit (bsc#1101816 ). - i40e/i40evf: do not trust VF to reset itself (bsc#1101816 ). - i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags for NVM update (bsc#1101816). - i40e/i40evf: fix incorrect default ITR values on driver load (bsc#1101816). - i40e/i40evf: Only track one ITR setting per ring instead of Tx/Rx (bsc#1101816). - i40e/i40evf: organize and re-number feature flags (bsc#1101816 ). - i40e/i40evf: Record ITR register location in the q_vector (bsc#1101816). - i40e/i40evf: rename bytes_per_int to bytes_per_usec (bsc#1101816 ). - i40e/i40evf: Split container ITR into current_itr and target_itr (bsc#1101816). - i40e/i40evf: Update DESC_NEEDED value to reflect larger value (bsc#1101816). - i40e/i40evf: use DECLARE_BITMAP for state (bsc#1101816 ). - i40e/i40evf: Use ring pointers to clean up _set_itr_per_queue (bsc#1101816). - i40e/i40evf: use SW variables for hang detection (bsc#1101816 ). - i40e/i40evf: Use usec value instead of reg value for ITR defines (bsc#1101816). - i40e: ignore skb->xmit_more when deciding to set RS bit (bsc#1101816). - i40e: implement split PCI error reset handler (bsc#1101816 ). - i40e: limit lan queue count in large CPU count machine (bsc#1101816). - i40e: make const array patterns static, reduces object code size (bsc#1101816). - i40e: make i40evf_map_rings_to_vectors void (bsc#1101816 ). - i40e: make use of i40e_vc_disable_vf (bsc#1101816). - i40e: mark PM functions as __maybe_unused (bsc#1101816 ). - i40e: move AUTO_DISABLED flags into the state field (bsc#1101816 ). - i40e: move client flags into state bits (bsc#1101816). - i40e: move I40E_FLAG_FILTER_SYNC to a state bit (bsc#1101816 ). - i40e: move I40E_FLAG_TEMP_LINK_POLLING to state field (bsc#1101816). - i40e: move I40E_FLAG_UDP_FILTER_SYNC to the state field (bsc#1101816). - i40e: prevent service task from running while we're suspended (bsc#1101816). - i40e: Prevent setting link speed on I40E_DEV_ID_25G_B (bsc#1101816). - i40e: Prevent setting link speed on KX_X722 (bsc#1101816 ). - i40e: Properly maintain flow director filters list (bsc#1101816 ). - i40e: redfine I40E_PHY_TYPE_MAX (bsc#1101816). - i40e: reduce lrxqthresh from 2 to 1 (bsc#1101816). - i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 (bsc#1101816). - i40e: refactor FW version checking (bsc#1101816). - i40e: refactor promisc_changed in i40e_sync_vsi_filters (bsc#1101816). - i40e: relax warning message in case of version mismatch (bsc#1101816). - i40e: remove duplicate pfc stats (bsc#1101816). - i40e: remove i40e_fcoe files (bsc#1101816). - i40e: remove ifdef SPEED_25000 (bsc#1101816). - i40e: Remove limit of 64 max queues per channel (bsc#1101816 ). - i40e: remove logically dead code (bsc#1101816). - i40e: remove redundant initialization of read_size (bsc#1101816 ). - i40e: rename 'change' variable to 'autoneg_changed' (bsc#1101816 ). - i40e: rename 'cmd' variables in ethtool interface (bsc#1101816 ). - i40e: re-number feature flags to remove gaps (bsc#1101816 ). - i40e: restore promiscuous after reset (bsc#1101816). - i40e: restore TCPv4 input set when re-enabling ATR (bsc#1101816 ). - i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs (bsc#1101816). - i40e: shutdown all IRQs and disable MSI-X when suspended (bsc#1101816). - i40e: simplify member variable accesses (bsc#1101816). - i40e: split i40e_get_strings() into smaller functions (bsc#1101816). - i40e: Stop dropping 802.1ad tags - eth proto 0x88a8 (bsc#1101816 ). - i40e: stop using cmpxchg flow in i40e_set_priv_flags() (bsc#1101816). - i40e: track filter type statistics when deleting invalid filters (bsc#1101816). - i40e: track id can be 0 (bsc#1101816). - i40e: update data pointer directly when copying to the buffer (bsc#1101816). - i40e: update VFs of link state after GET_VF_RESOURCES (bsc#1101816). - i40e: use admin queue for setting LEDs behavior (bsc#1101816 ). - i40e: use a local variable instead of calculating multiple times (bsc#1101816). - i40e: use newer generic PM support instead of legacy PM callbacks (bsc#1101816). - i40e: use separate state bit for miscellaneous IRQ setup (bsc#1101816). - i40e: use the more traditional 'i' loop variable (bsc#1101816 ). - i40e: use WARN_ONCE to replace the commented BUG_ON size check (bsc#1101816). - i40evf: Allow turning off offloads when the VF has VLAN set (bsc#1101816). - i40evf: Clean-up flags for promisc mode to avoid high polling rate (bsc#1101816). - i40evf: Correctly populate rxitr_idx and txitr_idx (bsc#1101816 ). - i40evf: Do not clear MSI-X PBA manually (bsc#1101816). - i40evf: Drop i40evf_fire_sw_int as it is prone to races (bsc#1101816). - i40evf: enable support for VF VLAN tag stripping control (bsc#1101816). - i40evf: Enable VF to request an alternate queue allocation (bsc#1101816). - i40evf: Fix a hardware reset support in VF driver (bsc#1101816 ). - i40evf: fix client notify of l2 params (bsc#1101816). - i40evf: Fix double locking the same resource (bsc#1101816 ). - i40evf: Fix link up issue when queues are disabled (bsc#1101816 ). - i40evf: fix ring to vector mapping (bsc#1101816). - i40evf: Fix turning TSO, GSO and GRO on after (bsc#1101816 ). - i40evf: hold the critical task bit lock while opening (bsc#1101816). - i40evf: lower message level (bsc#1101816). - i40evf: Make VF reset warning message more clear (bsc#1101816 ). - i40evf: release bit locks in reverse order (bsc#1101816 ). - i40evf: remove flags that are never used (bsc#1101816 ). - i40evf: remove flush_scheduled_work call in i40evf_remove (bsc#1101816). - i40evf: Replace GFP_ATOMIC with GFP_KERNEL in i40evf_add_vlan (bsc#1101816). - i40evf: Use an iterator of the same type as the list (bsc#1101816). - i40evf: use __dev_c_sync routines in .set_rx_mode (bsc#1101816 ). - i40evf: use GFP_ATOMIC under spin lock (bsc#1101816). - i40evf: use spinlock to protect (mac|vlan)_filter_list (bsc#1101816). - i40e/virtchnl: fix application of sizeof to pointer (bsc#1101816 ). - i40iw: Fix memory leak in error path of create QP (bsc#1058659 ). - i40iw: Refactor of driver generated AEs (bsc#1058659 ). - i40iw: Tear-down connection after CQP Modify QP failure (bsc#1058659). - i40iw: Use correct address in dst_neigh_lookup for IPv6 (bsc#1058659). - ib/core: Fix error code for invalid GID entry (bsc#1046306 ). - ib/core: Honor port_num while resolving GID for IB link layer (bsc#1046306). - ib/core: Make ib_mad_client_id atomic (bsc#1046306). - ib/core: Make testing MR flags for writability a static inline function (bsc#1046306). - ib/core: Remove duplicate declaration of gid_cache_wq (bsc#1046306). - ib/hfi1: Add bypass register defines and replace blind constants (bsc#1060463). - ib/hfi1: Fix fault injection init/exit issues (bsc#1060463 ). - ib/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values (bsc#1060463). - ib/hfi1: Fix user context tail allocation for DMA_RTAIL (bsc#1060463). - ib/hfi1: Return actual error value from program_rcvarray() (bsc#1060463). - ib/iser: Do not reduce max_sectors (bsc#1046306). - ib/isert: Fix for lib/dma_debug check_sync warning (bsc#1046306 ). - ib/isert: fix T10-pi check mask setting (bsc#1046306 ). - ib/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' (bsc#1046302). - ib/mlx4: Mark user MR as writable if actual virtual memory is writable (bsc#1046302). - ib/mlx5: Fetch soft WQE's on fatal error state (bsc#1046305 ). - ib/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046305). - ibmvnic: Fix error recovery on login failure (bsc#1101789). - ib/qedr: Remove GID add/del dummy routines (bsc#1086314 bsc#1086313 bsc#1086301). - ib/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INV (bsc#1046306). - ib/rxe: avoid double kfree_skb (bsc#1046306). - ib/rxe: Fix for oops in rxe_register_device on ppc64le arch (bsc#1046306). - ib/umem: Use the correct mm during ib_umem_release (bsc#1046306 ). - ib/uverbs: Fix possible oops with duplicate ioctl attributes (bsc#1046306). - igb: Fix not adding filter elements to the list (bsc#1056651 ). - igb: Fix queue selection on MAC filters on i210 (bsc#1056651 ). - iio: accel: st_accel: fix data-ready line configuration (bsc#1051510). - iio: accel: st_accel_i2c: fix i2c_device_id table (bsc#1051510). - iio: accel: st_accel_spi: fix spi_device_id table (bsc#1051510). - iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable (bsc#1051510). - iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()' (bsc#1051510). - iio: BME280: Updates to Humidity readings need ctrl_reg write! (bsc#1051510). - iio: gyro: st_gyro: fix L3GD20H support (bsc#1051510). - iio: humidity: hts221: remove warnings in hts221_parse_{temp,rh}_caldata() (bsc#1051510). - iio: imu: inv_mpu6050: test whoami first and against all known values (bsc#1051510). - iio: magnetometer: st_magn_core: enable multiread by default for LIS3MDL (bsc#1051510). - iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL (bsc#1051510). - iio: magnetometer: st_magn_spi: fix spi_device_id table (bsc#1051510). - iio: pressure: bmp280: fix relative humidity unit (bsc#1051510). - iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H (bsc#1051510). - iio: pressure: zpa2326: Remove always-true check which confuses gcc (bsc#1051510). - iio: pressure: zpa2326: report interrupted case as failure (bsc#1051510). - iio: trigger: stm32-timer: fix quadrature mode get routine (bsc#1051510). - iio: trigger: stm32-timer: fix write_raw return value (bsc#1051510). - iio: tsl2583: correct values in integration_time_available (bsc#1051510). - infiniband: fix a possible use-after-free bug (bsc#1046306 ). - input: elan_i2c - add ACPI ID for lenovo ideapad 330 (bsc#1051510). - input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST (bsc#1051510). - input: i8042 - add Lenovo LaVie Z to the i8042 reset list (bsc#1051510). - iommu/vt-d: Clear Page Request Overflow fault bit (). - ip6_tunnel: remove magic mtu value 0xFFF8 (networking-stable-18_06_08). - ipc/shm: fix use-after-free of shm file via remap_file_pages() (bnc#1102512). - ipmr: properly check rhltable_init() return value (networking-stable-18_06_08). - ipv4: remove warning in ip_recv_error (networking-stable-18_06_08). - ipv6: allow PMTU exceptions to local routes (networking-stable-18_06_20). - ipv6: sr: fix memory OOB access in seg6_do_srh_encap/inline (networking-stable-18_06_08). - iw_cxgb4: Add ib_device->get_netdev support (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - iw_cxgb4: correctly enforce the max reg_mr depth (bsc#1046543 ). - iw_cxgb4: initialize ib_mr fields for user mrs (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - iwlwifi: pcie: fix race in Rx buffer allocator (bsc#1051510). - ixgbe: add counter for times Rx pages gets allocated, not recycled (bsc#1101674). - ixgbe: add error checks when initializing the PHY (bsc#1101674 ). - ixgbe: Add receive length error counter (bsc#1101674). - ixgbe: add status reg reads to ixgbe_check_remove (bsc#1101674 ). - ixgbe: Add support for macvlan offload RSS on X550 and clean-up pool handling (bsc#1101674). - ixgbe: add support for reporting 5G link speed (bsc#1101674 ). - ixgbe: advertise highest capable link speed (bsc#1101674 ). - ixgbe: Assume provided MAC filter has been verified by macvlan (bsc#1101674). - ixgbe: avoid bringing rings up/down as macvlans are added/removed (bsc#1101674). - ixgbe: Avoid to write the RETA table when unnecessary (bsc#1101674). - ixgbe: Clear SWFW_SYNC register during init (bsc#1101674 ). - ixgbe: declare ixgbe_mac_operations structures as const (bsc#1101674). - ixgbe: Default to 1 pool always being allocated (bsc#1101674 ). - ixgbe: Do not assume dev->num_tc is equal to hardware TC config (bsc#1101674). - ixgbe: Do not manipulate macvlan Tx queues when performing macvlan offload (bsc#1101674). - ixgbe: Do not report unsupported timestamping filters for X550 (bsc#1101674). - ixgbe: Drop l2_accel_priv data pointer from ring struct (bsc#1101674). - ixgbe: Drop support for macvlan specific unicast lists (bsc#1101674). - ixgbe: enable multicast on shutdown for WOL (bsc#1101674 ). - ixgbe: extend firmware version support (bsc#1101674). - ixgbe: Fix && vs || typo (bsc#1101674). - ixgbe: fix crash when injecting AER after failed reset (bsc#1101674). - ixgbe: fix disabling hide VLAN on VF reset (bsc#1101674 ). - ixgbe: Fix handling of macvlan Tx offload (bsc#1101674 ). - ixgbe: Fix interaction between SR-IOV and macvlan offload (bsc#1101674). - ixgbe: Fix kernel-doc format warnings (bsc#1101674). - ixgbe: Fix limitations on macvlan so we can support up to 63 offloaded devices (bsc#1101674). - ixgbe: fix possible race in reset subtask (bsc#1101674 ). - ixgbe: fix read-modify-write in x550 phy setup (bsc#1101674 ). - ixgbe: Fix setting of TC configuration for macvlan case (bsc#1101674). - ixgbe: fix the FWSM.PT check in ixgbe_mng_present() (bsc#1101674 ). - ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan offloaded rings (bsc#1101674). - ixgbe: force VF to grab new MAC on driver reload (bsc#1101674 ). - ixgbe: introduce a helper to simplify code (bsc#1101674 ). - ixgbe/ixgbevf: Free IRQ when PCI error recovery removes the device (bsc#1101674). - ixgbe: Perform reinit any time number of VFs change (bsc#1101674 ). - ixgbe: Remove an obsolete comment about ITR (bsc#1101674 ). - ixgbe: remove redundant initialization of 'pool' (bsc#1101674 ). - ixgbe: remove unused enum latency_range (bsc#1101674). - ixgbe: restore normal RSS after last macvlan offload is removed (bsc#1101674). - ixgbe: return error on unsupported SFP module when resetting (bsc#1101674). - ixgbe: split Tx/Rx ring clearing for ethtool loopback test (bsc#1101674). - ixgbe: There is no need to update num_rx_pools in L2 fwd offload (bsc#1101674). - ixgbe: Update adaptive ITR algorithm (bsc#1101674). - ixgbe: use ARRAY_SIZE for array sizing calculation on array buf (bsc#1101674). - ixgbe: Use ring values to test for Tx pending (bsc#1101674 ). - ixgbevf: add build_skb support (bsc#1101674). - ixgbevf: add counters for Rx page allocations (bsc#1101674 ). - ixgbevf: add ethtool private flag for legacy Rx (bsc#1101674 ). - ixgbevf: add function for checking if we can reuse page (bsc#1101674). - ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING (bsc#1101674). - ixgbevf: add support for padding packet (bsc#1101674). - ixgbevf: add support for using order 1 pages to receive large frames (bsc#1101674). - ixgbevf: allocate the rings as part of q_vector (bsc#1101674 ). - ixgbevf: break out Rx buffer page management (bsc#1101674 ). - ixgbevf: clear rx_buffer_info in configure instead of clean (bsc#1101674). - ixgbevf: do not bother clearing tx_buffer_info in ixgbevf_clean_tx_ring() (bsc#1101674). - ixgbevf: fix ixgbevf_xmit_frame()'s return type (bsc#1101674 ). - ixgbevf: Fix kernel-doc format warnings (bsc#1101674). - ixgbevf: fix MAC address changes through ixgbevf_set_mac() (bsc#1101674). - ixgbevf: fix possible race in the reset subtask (bsc#1101674 ). - ixgbevf: fix unused variable warning (bsc#1101674). - ixgbevf: improve performance and reduce size of ixgbevf_tx_map() (bsc#1101674). - ixgbevf: make sure all frames fit minimum size requirements (bsc#1101674). - ixgbevf: only DMA sync frame length (bsc#1101674). - ixgbevf: remove redundant initialization of variable 'dma' (bsc#1101674). - ixgbevf: remove redundant setting of xcast_mode (bsc#1101674 ). - ixgbevf: setup queue counts (bsc#1101674). - ixgbevf: update code to better handle incrementing page count (bsc#1101674). - ixgbevf: use ARRAY_SIZE for various array sizing calculations (bsc#1101674). - ixgbevf: use length to determine if descriptor is done (bsc#1101674). - ixgbevf: use page_address offset from page (bsc#1101674 ). - jump_label: Add branch hints to static_branch_{un,}likely() (bnc#1101669 optimise numa balancing for fast migrate). - kabi cxgb4 MU (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - kcm: Fix use-after-free caused by clonned sockets (networking-stable-18_06_08). - kernel/params.c: downgrade warning for unsafe parameters (bsc#1051510). - keys: DNS: fix parsing multiple options (bsc#1051510). - kvm: PPC: Check if IOMMU page is contained in the pinned physical page (bsc#1077761, git-fixes). - kvm: x86: fix vcpu initialization with userspace lapic (bsc#1101564). - kvm: x86: move LAPIC initialization after VMCS creation (bsc#1101564). - libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device' (bsc#1094119). - libnvdimm, label: fix index block size calculation (bsc#1102147). - mailbox: bcm2835: Fix of_xlate return value (bsc#1051510). - mailbox: PCC: erroneous error message when parsing ACPI PCCT (bsc#1096330). - mdio-sun4i: Fix a memory leak (bsc#1051510). - media: coda/imx-vdoa: Check for platform_get_resource() error (bsc#1051510). - media: cx25840: Use subdev host data for PLL override (bsc#1051510). - media: cx88: Get rid of spurious call to cx8800_start_vbi_dma() (bsc#1051510). - media: cxusb: restore RC_MAP for MyGica T230 (bsc#1051510). - media: dt-bindings: media: rcar_vin: Use status "okay" (bsc#1051510). - media: dvb-core: always call invoke_release() in fe_free() (bsc#1051510). - media: dvb_frontend: fix ifnullfree.cocci warnings (bsc#1051510). - media: dvb_frontend: only use kref after initialized (bsc#1051510). - media: dvb_net: ensure that dvb_net_ule_handle is fully initialized (bsc#1051510). - media: media-device: fix ioctl function types (bsc#1051510). - media: mxl111sf: Fix potential null pointer dereference (bsc#1051510). - media: omap3isp/isp: remove an unused static var (bsc#1051510). - media: rcar_jpu: Add missing clk_disable_unprepare() on error in jpu_open() (bsc#1051510). - media: s5p-jpeg: fix number of components macro (bsc#1051510). - media: s5p-mfc: Fix lock contention - request_firmware() once (bsc#1051510). - media: saa7164: Fix driver name in debug output (bsc#1051510). - media: si470x: fix __be16 annotations (bsc#1051510). - media: siano: get rid of __le32/__le16 cast warnings (bsc#1051510). - media: staging: omap4iss: Include asm/cacheflush.h after generic includes (bsc#1051510). - media: tw686x: Fix incorrect vb2_mem_ops GFP flags (bsc#1051510). - media: vivid: potential integer overflow in vidioc_g_edid() (bsc#1051510). - mfd: tps65218: Reorder tps65218_regulator_id enum (bsc#1051510). - mfd: tps65911-comparator: Fix a build error (bsc#1051510). - mfd: tps65911-comparator: Fix an off by one bug (bsc#1051510). - mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG (networking-stable-18_06_08). - mmc: cavium: Fix use-after-free in of_platform_device_destroy (bsc#1051510). - mmc: dw_mmc: fix card threshold control configuration (bsc#1051510). - mmc: dw_mmc: update actual clock for mmc debugfs (bsc#1051510). - mmc: meson-gx: remove CLK_DIVIDER_ALLOW_ZERO clock flag (bsc#1051510). - mmc: pwrseq: Use kmalloc_array instead of stack VLA (bsc#1051510). - mmc: sdhci-msm: fix issue with power irq (bsc#1051510). - mmc: sdhci-of-esdhc: disable SD clock for clock value 0 (bsc#1051510). - mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec (bsc#1051510). - mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb (bsc#1051510). - mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock (bsc#1051510). - mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable (bsc#1051510). - mmc: tmio: remove outdated comment (bsc#1051510). - modsign: log module name in the event of an error (bsc#1093666). - modsign: print module name along with error message (bsc#1093666). - module: make it clear when we're handling the module copy in info->hdr (bsc#1093666). - module: setup load info before module_sig_check() (bsc#1093666). - mvpp2: fix multicast address filter (bsc#1098633). - mwifiex: correct histogram data with appropriate index (bsc#1051510). - mwifiex: handle race during mwifiex_usb_disconnect (bsc#1051510). - net: add rb_to_skb() and other rb tree helpers (bsc#1102340). - net: cxgb3_main: fix potential Spectre v1 (bsc#1046533 ). - net: define the TSO header size in net/tso.h (bsc#1098633). - netdev-FAQ: clarify DaveM's position for stable backports (networking-stable-18_06_08). - net: dsa: add error handling for pskb_trim_rcsum (networking-stable-18_06_20). - net: ethernet: davinci_emac: fix error handling in probe() (networking-stable-18_06_08). - net: ethernet: ti: cpdma: correct error handling for chan create (networking-stable-18_06_08). - net: ethtool: Add macro to clear a link mode setting (bsc#1101816). - net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlan (networking-stable-18_06_20). - net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy (networking-stable-18_06_08). - net: metrics: add proper netlink validation (networking-stable-18_06_08). - net/mlx4_core: Fix error handling in mlx4_init_port_info (bsc#1046300). - net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper (bsc#1046300). - net/mlx4_en: Do not reuse RX page when XDP is set (bsc#1046299 ). - net/mlx4: Fix irq-unsafe spinlock usage (networking-stable-18_06_08). - net/mlx5: Adjust clock overflow work period (bsc#1046303). - net/mlx5e: Do not allow aRFS for encapsulated packets (bsc#1046303). - net/mlx5e: Do not attempt to dereference the ppriv struct if not being eswitch manager (bsc#1046300). - net/mlx5e: Fix quota counting in aRFS expire flow (bsc#1046303 ). - net/mlx5e: Refine ets validation function (bsc#1075360). - net/mlx5e: Remove redundant vport context vlan update (bsc#1046303). - net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303). - net/mlx5e: When RXFCS is set, add FCS data into checksum calculation (networking-stable-18_06_08). - net/mlx5: Fix command interface race in polling mode (bsc#1046300). - net/mlx5: Fix dump_command mailbox length printed (bsc#1046303 ). - net/mlx5: Fix incorrect raw command length parsing (bsc#1046300 ). - net/mlx5: Fix wrong size allocation for QoS ETC TC regitster (bsc#1046300). - net/mlx5: FPGA, Call DMA unmap with the right size (bsc#1046303 ). - net/mlx5: Free IRQs in shutdown path (bsc#1046303). - net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands (bsc#1046303). - net/mlx5: Properly deal with flow counters when deleting rules (bsc#1046303). - net/mlx5: Protect from command bit overflow (bsc#1046303 ). - net/mlx5: Refactor num of blocks in mailbox calculation (bsc#1046303). - net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303). - net: mvmdio: add xmdio xsmi support (bsc#1098633). - net: mvmdio: check the MII_ADDR_C45 bit is not set for smi operations (bsc#1098633). - net: mvmdio: introduce an ops structure (bsc#1098633). - net: mvmdio: put the poll intervals in the ops structure (bsc#1098633). - net: mvmdio: remove duplicate locking (bsc#1098633). Refresh patches.suse/net-mvmdio-disable-unprepare-clocks-in-EPROBE_DEFER-.patch. - net: mvmdio: reorder headers alphabetically (bsc#1098633). - net: mvmdio: simplify the smi read and write error paths (bsc#1098633). - net: mvmdio: use GENMASK for masks (bsc#1098633). - net: mvmdio: use tabs for defines (bsc#1098633). - net: mvpp2: add comments about smp_processor_id() usage (bsc#1098633). - net: mvpp2: add ethtool GOP statistics (bsc#1098633). - net: mvpp2: Add hardware offloading for VLAN filtering (bsc#1098633). - net: mvpp2: add support for TX interrupts and RX queue distribution modes (bsc#1098633). - net: mvpp2: Add support for unicast filtering (bsc#1098633). - net: mvpp2: adjust the coalescing parameters (bsc#1098633). - net: mvpp2: align values in ethtool get_coalesce (bsc#1098633). - net: mvpp2: allocate zeroed tx descriptors (bsc#1098633). - net: mvpp2: check ethtool sets the Tx ring size is to a valid min value (bsc#1098633). - net: mvpp2: cleanup probed ports in the probe error path (bsc#1098633). - net: mvpp2: do not call txq_done from the Tx path when Tx irqs are used (bsc#1098633). - net: mvpp2: do not disable GMAC padding (bsc#1098633). - net: mvpp2: do not select the internal source clock (bsc#1098633). - net: mvpp2: do not set GMAC autoneg when using XLG MAC (bsc#1098633). - net: mvpp2: do not sleep in set_rx_mode (bsc#1098633). - net: mvpp2: do not unmap TSO headers buffers (bsc#1098633). - net: mvpp2: Do not use dynamic allocs for local variables (bsc#1098633). - net: mvpp2: dynamic reconfiguration of the comphy/GoP/MAC (bsc#1098633). - net: mvpp2: enable ACPI support in the driver (bsc#1098633). - net: mvpp2: enable basic 10G support (bsc#1098633). - net: mvpp2: enable UDP/TCP checksum over IPv6 (bsc#1098633). - net: mvpp2: fallback using h/w and random mac if the dt one isn't valid (bsc#1098633). - net: mvpp2: Fix clk error path in mvpp2_probe (bsc#1098633). - net: mvpp2: Fix clock resource by adding an optional bus clock (bsc#1098633). - net: mvpp2: Fix clock resource by adding missing mg_core_clk (bsc#1098633). - net: mvpp2: Fix DMA address mask size (bsc#1098633). - net: mvpp2: fix GOP statistics loop start and stop conditions (bsc#1098633). - net: mvpp2: fix invalid parameters order when calling the tcam init (bsc#1098633). - net: mvpp2: fix MVPP21_ISR_RXQ_GROUP_REG definition (bsc#1098633). - net: mvpp2: Fix parser entry init boundary check (bsc#1098633). - net: mvpp2: fix parsing fragmentation detection (bsc#1098633). - net: mvpp2: fix port list indexing (bsc#1098633). - net: mvpp2: Fix TCAM filter reserved range (bsc#1098633). - net: mvpp2: fix the packet size configuration for 10G (bsc#1098633). - net: mvpp2: fix the RSS table entry offset (bsc#1098633). - net: mvpp2: fix the synchronization module bypass macro name (bsc#1098633). - net: mvpp2: fix the txq_init error path (bsc#1098633). - net: mvpp2: fix TSO headers allocation and management (bsc#1098633). - net: mvpp2: fix typo in the tcam setup (bsc#1098633). - net: mvpp2: fix use of the random mac address for PPv2.2 (bsc#1098633). - net: mvpp2: improve the link management function (bsc#1098633). - net: mvpp2: initialize the comphy (bsc#1098633). - net: mvpp2: initialize the GMAC when using a port (bsc#1098633). - net: mvpp2: initialize the GoP (bsc#1098633). - net: mvpp2: initialize the RSS tables (bsc#1098633). - net: mvpp2: initialize the Tx FIFO size (bsc#1098633). - net: mvpp2: initialize the XLG MAC when using a port (bsc#1098633). - net: mvpp2: introduce per-port nrxqs/ntxqs variables (bsc#1098633). - net: mvpp2: introduce queue_vector concept (bsc#1098633). - net: mvpp2: jumbo frames support (bsc#1098633). - net: mvpp2: limit TSO segments and use stop/wake thresholds (bsc#1098633). - net: mvpp2: Make mvpp2_prs_hw_read a parser entry init function (bsc#1098633). - net: mvpp2: make the phy optional (bsc#1098633). - net: mvpp2: move from cpu-centric naming to "software thread" naming (bsc#1098633). - net: mvpp2: move the mac retrieval/copy logic into its own function (bsc#1098633). - net: mvpp2: move the mii configuration in the ndo_open path (bsc#1098633). - net: mvpp2: mvpp2_check_hw_buf_num() can be static (bsc#1098633). - net: mvpp2: only free the TSO header buffers when it was allocated (bsc#1098633). - net: mvpp2: Prevent userspace from changing TX affinities (bsc#1098633). - net: mvpp2: remove mvpp2_pool_refill() (bsc#1098633). - net: mvpp2: remove RX queue group reset code (bsc#1098633). - net: mvpp2: remove unused mvpp2_bm_cookie_pool_set() function (bsc#1098633). - net: mvpp2: remove useless goto (bsc#1098633). - net: mvpp2: report the tx-usec coalescing information to ethtool (bsc#1098633). - net: mvpp2: set maximum packet size for 10G ports (bsc#1098633). - net: mvpp2: set the Rx FIFO size depending on the port speeds for PPv2.2 (bsc#1098633). - net: mvpp2: Simplify MAC filtering function parameters (bsc#1098633). - net: mvpp2: simplify maintaining enabled ports' list (bsc#1098633). - net: mvpp2: simplify the link_event function (bsc#1098633). - net: mvpp2: simplify the Tx desc set DMA logic (bsc#1098633). - net: mvpp2: software tso support (bsc#1098633). - net: mvpp2: split the max ring size from the default one (bsc#1098633). - net: mvpp2: take advantage of the is_rgmii helper (bsc#1098633). - net: mvpp2: unify register definitions coding style (bsc#1098633). - net: mvpp2: unify the txq size define use (bsc#1098633). - net: mvpp2: update the BM buffer free/destroy logic (bsc#1098633). - net: mvpp2: use a data size of 10kB for Tx FIFO on port 0 (bsc#1098633). - net: mvpp2: use correct index on array mvpp2_pools (bsc#1098633). - net: mvpp2: use device_*/fwnode_* APIs instead of of_* (bsc#1098633). - net: mvpp2: Use relaxed I/O in data path (bsc#1098633). - net: mvpp2: use the aggr txq size define everywhere (bsc#1098633). - net: mvpp2: use the GoP interrupt for link status changes (bsc#1098633). - net: mvpp2: use the same buffer pool for all ports (bsc#1098633). - net/packet: refine check for priv area size (networking-stable-18_06_08). - net: phy: add XAUI and 10GBASE-KR PHY connection types (bsc#1098633). - net: phy: broadcom: Fix auxiliary control register reads (networking-stable-18_06_08). - net: phy: broadcom: Fix bcm_write_exp() (networking-stable-18_06_08). - net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 (networking-stable-18_06_20). - net: qed: use correct strncpy() size (bsc#1086314 bsc#1086313 bsc#1086301). - net/sched: act_simple: fix parsing of TCA_DEF_DATA (networking-stable-18_06_20). - net/sched: act_tunnel_key: fix NULL dereference when 'goto chain' is used (bsc#1056787). - net/sched: fix NULL dereference in the error path of tcf_sample_init() (bsc#1056787). - net: sched: red: avoid hashing NULL child (bsc#1056787). - net-sysfs: Fix memory leak in XPS configuration (networking-stable-18_06_08). - net: usb: cdc_mbim: add flag FLAG_SEND_ZLP (networking-stable-18_06_08). - nfc: nfcmrvl_uart: fix device-node leak during probe (bsc#1051510). - nfc: pn533: Fix wrong GFP flag usage (bsc#1051510). - nfit, address-range-scrub: add module option to skip initial ars (bsc#1094119). - nfit, address-range-scrub: determine one platform max_ars value (bsc#1094119). - nfit, address-range-scrub: fix scrub in-progress reporting (bsc#1051510). - nfit, address-range-scrub: introduce nfit_spa->ars_state (bsc#1094119). - nfit, address-range-scrub: rework and simplify ARS state machine (bsc#1094119). - nfit: fix region registration vs block-data-window ranges (bsc#1051510). - nfit: fix unchecked dereference in acpi_nfit_ctl (bsc#1051510). - nvme: add ANA support (bsc#1054245). - nvme: add bio remapping tracepoint (bsc#1054245). - nvme: centralize ctrl removal prints (bsc#1054245). - nvme: cleanup double shift issue (bsc#1054245). - nvme: do not enable AEN if not supported (bsc#1077989). - nvme: do not hold nvmf_transports_rwsem for more than transport lookups (bsc#1054245). - nvme: do not rely on the changed namespace list log (bsc#1054245). - nvme: enforce 64bit offset for nvme_get_log_ext fn (bsc#1054245). - nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD (). - nvme: Fix sync controller reset return (bsc#1077989). - nvme: fix use-after-free in nvme_free_ns_head (bsc#1054245). - nvme: guard additional fields in nvme command structures (bsc#1054245). - nvme.h: add AEN configuration symbols (bsc#1054245). - nvme.h: add ANA definitions (bsc#1054245). - nvme.h: add support for the log specific field (bsc#1054245). - nvme.h: add the changed namespace list log (bsc#1054245). - nvme: host: core: fix precedence of ternary operator (bsc#1054245). - nvme.h: untangle AEN notice definitions (bsc#1054245). - nvme: if_ready checks to fail io to deleting controller (bsc#1077989). - nvme: implement log page low/high offset and dwords (bsc#1054245). - nvme: kabi fixes for nvme_ctrl (bsc#1054245). - nvme: kABI fixes for nvmet_ctrl (bsc#1054245). - nvme: kABI fix for ANA support in nvme_ctrl (bsc#1054245). - nvme-loop: add support for multiple ports (bsc#1054245). - nvme: make nvme_get_log_ext non-static (bsc#1054245). - nvme: mark nvme_queue_scan static (bsc#1054245). - nvme/multipath: Disable runtime writable enabling parameter (bsc#1054245). - nvme: partially revert "nvme: remove nvme_req_needs_failover" (bsc#1054245). - nvme: reintruduce nvme_get_log_ext() (bsc#1054245). - nvme: remove nvme_req_needs_failover (bsc#1054245). - nvme: simplify the API for getting log pages (bsc#1054245). - nvme: submit AEN event configuration on startup (bsc#1054245). - nvmet: add AEN configuration support (bsc#1054245). - nvmet: add a new nvmet_zero_sgl helper (bsc#1054245). - nvmet: add minimal ANA support (bsc#1054245). - nvmet: constify struct nvmet_fabrics_ops (bsc#1054245). - nvmet-fc: fix target sgl list on large transfers (). - nvmet: filter newlines from user input (bsc#1054245). - nvmet: fixup crash on NULL device path (bsc#1054245). - nvmet: implement the changed namespaces log (bsc#1054245). - nvmet: kABI fixes for ANA support (bsc#1054245). - nvmet: keep a port pointer in nvmet_ctrl (bsc#1054245). - nvmet: mask pending AENs (bsc#1054245). - nvmet: reset keep alive timer in controller enable (bsc#1054245). - nvmet: return all zeroed buffer when we can't find an active namespace (bsc#1054245). - nvmet: split log page implementation (bsc#1054245). - nvmet: support configuring ANA groups (bsc#1054245). - nvmet: track and limit the number of namespaces per subsystem (1054245). - nvmet: use Retain Async Event bit to clear AEN (bsc#1054245). - nvme: use the changed namespaces list log to clear ns data changed AENs (bsc#1054245). - of: fix DMA mask generation (bsc#1051510). - of: Make of_fwnode_handle() safer (bsc#1098633). - of/pci: Fix theoretical NULL dereference (bsc#1051510). - of: restrict DMA configuration (bsc#1051510). - pci: Account for all bridges on bus when distributing bus numbers (bsc#1100132). - pci: altera: Fix bool initialization in tlp_read_packet() (bsc#1051510). - pci: dwc: Fix enumeration end when reaching root subordinate (bsc#1100132). - pci: endpoint: Fix kernel panic after put_device() (bsc#1051510). - pci: endpoint: Populate func_no before calling pci_epc_add_epf() (bsc#1051510). - pci: exynos: Fix a potential init_clk_resources NULL pointer dereference (bsc#1051510). - pci: faraday: Fix of_irq_get() error check (bsc#1051510). - pci: ibmphp: Fix use-before-set in get_max_bus_speed() (bsc#1051510). - pci: pciehp: Assume NoCompl+ for Thunderbolt ports (bsc#1051510). - pci: pciehp: Request control of native hotplug only if supported (bsc#1051510). - pci: Prevent sysfs disable of device while driver is attached (bsc#1051510). - pci: shpchp: Fix AMD POGO identification (bsc#1051510). - perf intel-pt: Always set no branch for dummy event (bsc#1087217). - perf intel-pt: Set no_aux_samples for the tracking event (bsc#1087217). - perf/x86: Fix data source decoding for Skylake (). - perf/x86/intel/uncore: Add event constraint for BDX PCU (bsc#1087202). - perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs (bsc#1087233). - perf/x86/intel/uncore: Fix SKX CHA event extra regs (bsc#1087233). - perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask (bsc#1087233). - perf/x86/intel/uncore: Fix Skylake server PCU PMU event format (bsc#1087233). - perf/x86/intel/uncore: Fix Skylake UPI PMU event masks (bsc#1087233). - perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field (bsc#1087233). - phy: add sgmii and 10gkr modes to the phy_mode enum (bsc#1098633). - pinctrl: at91-pio4: add missing of_node_put (bsc#1051510). - pinctrl: bcm2835: Avoid warning from __irq_do_set_handler (bsc#1051510). - pinctrl: imx: fix debug message for SHARE_MUX_CONF_REG case (bsc#1051510). - pinctrl: intel: Initialize GPIO properly when used through irqchip (bsc#1087092). - pinctrl: intel: Read back TX buffer state (bsc#1051510). - pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 (bsc#1051510). - pinctrl: meson-gxl: Fix typo in AO I2S pins (bsc#1051510). - pinctrl: meson-gxl: Fix typo in AO SPDIF pins (bsc#1051510). - pinctrl: mvebu: use correct MPP sel value for dev pins (bsc#1051510). - pinctrl: nand: meson-gxbb: fix missing data pins (bsc#1051510). - pinctrl: nsp: Fix potential NULL dereference (bsc#1051510). - pinctrl: nsp: off by ones in nsp_pinmux_enable() (bsc#1100132). - pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 (bsc#1051510). - pinctrl: sh-pfc: r8a7790: Add missing TX_ER pin to avb_mii group (bsc#1051510). - pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for SSI pins group (bsc#1051510). - pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions (bsc#1051510). - pinctrl: sh-pfc: r8a7796: Fix IPSR and MOD_SEL register pin assignment for NDFC pins group (bsc#1051510). - pinctrl: sh-pfc: r8a7796: Fix to delete A20..A25 pins function definitions (bsc#1051510). - pinctrl: sh-pfc: r8a7796: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions (bsc#1051510). - pinctrl: sunxi: fix V3s pinctrl driver IRQ bank base (bsc#1051510). - pinctrl: sunxi: fix wrong irq_banks number for H5 pinctrl (bsc#1051510). - pinctrl: uniphier: fix members of rmii group for Pro4 (bsc#1051510). - pinctrl: uniphier: fix pin_config_get() for input-enable (bsc#1051510). - pm / core: Fix supplier device runtime PM usage counter imbalance (bsc#1051510). - pm / hibernate: Fix oops at snapshot_write() (bsc#1051510). - pm / hibernate: Use CONFIG_HAVE_SET_MEMORY for include condition (bsc#1051510). - pm / wakeup: Only update last time for active wakeup sources (bsc#1051510). - power: gemini-poweroff: Avoid spurious poweroff (bsc#1051510). - powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently (bnc#1012382). - powerpc/64s: Clear PCR on boot (bnc#1012382). - powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() (bsc#1068032, bsc#1075087, bsc#1091041). - powerpc: Add missing prototype for arch_irq_work_raise() (bnc#1012382). - powerpc/eeh: Fix enabling bridge MMIO windows (bnc#1012382). - powerpc/fadump: Unregister fadump on kexec down path (bnc#1012382). - powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch (bnc#1012382). - powerpc/mpic: Check if cpu_possible() in mpic_physmask() (bnc#1012382). - powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops (bnc#1012382). - powerpc/powernv: Fix NVRAM sleep in invalid context when crashing (bnc#1012382). - powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops (bnc#1012382). - powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write() (bnc#1012382). - powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG (bnc#1012382). - power: supply: act8945a_charger: fix of_irq_get() error check (bsc#1051510). - power: supply: cpcap-charger: add OMAP_USB2 dependency (bsc#1051510). - pwm: meson: Fix allocation of PWM channel array (bsc#1051510). - pwm: meson: Improve PWM calculation precision (bsc#1051510). - pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS (bsc#1051510). - pwm: stm32: Remove unused struct device (bsc#1051510). - pwm: tiehrpwm: fix clock imbalance in probe error path (bsc#1051510). - pwm: tiehrpwm: Fix runtime PM imbalance at unbind (bsc#1051510). - qed: Adapter flash update support (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add APIs for flash access (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add configuration information to register dump and debug data (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add driver infrastucture for handling mfw requests (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: Add MFW interfaces for TLV request support (bsc#1086314 bsc#1086313 bsc#1086301). - qed* : Add new TLV to request PF to update MAC in bulletin board (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: Add sanity check for SIMD fastpath handler (bsc#1050536 ). - qed: Add support for multi function mode with 802.1ad tagging (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: Add support for processing fcoe tlv request (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add support for processing iscsi tlv request (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add support for tlv request processing (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Add support for Unified Fabric Port (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Advance drivers' version to 8.33.0.20 (bsc#1086314 ). - qed: code indent should use tabs where possible (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Correct Multicast API to reflect existence of 256 approximate buckets (bsc#1050536). - qed: Delete unused parameter p_ptt from mcp APIs (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Do not advertise DCBX_LLD_MANAGED capability (bsc#1050536 ). - qede: Add build_skb() support (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Add support for populating ethernet TLVs (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Adverstise software timestamp caps when PHC is not available (bsc#1050538). - qede: Do not drop rx-checksum invalidated packets (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Ethtool flash update support (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Fix barrier usage after tx doorbell write (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Fix ref-cnt usage count (bsc#1086314 bsc#1086313 bsc#1086301). - qede: fix spelling mistake: "registeration" -> "registration" (bsc#1086314 bsc#1086313 bsc#1086301 ). - qede: Refactor ethtool rx classification flow (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Support flow classification to the VFs (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Use NETIF_F_GRO_HW (bsc#1086314 bsc#1086313 bsc#1086301). - qede: Validate unsupported configurations (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix copying 2 strings (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix link flap issue due to mismatching EEE capabilities (bsc#1050536). - qed: Fix LL2 race during connection terminate (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix mask for physical address in ILT entry (networking-stable-18_06_08). - qed: Fix possibility of list corruption during rmmod flows (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: Fix possible memory leak in Rx error path handling (bsc#1050536). - qed: Fix possible race for the link state value (bsc#1050536 ). - qed: Fix potential use-after-free in qed_spq_post() (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix PTT entry leak in the selftest error flow (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix reading stale configuration information (bsc#1086314 ). - qed: Fix setting of incorrect eswitch mode (bsc#1050536 ). - qed: Fix shared memory inconsistency between driver and the MFW (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: fix spelling mistake: "checksumed" -> "checksummed" (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: fix spelling mistake: "offloded" -> "offloaded" (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: fix spelling mistake: "taskelt" -> "tasklet" (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix use of incorrect shmem address (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Fix use of incorrect size in memcpy call (bsc#1050536 ). - qed: Free reserved MR tid (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: HSI renaming for different types of HW (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Limit msix vectors in kdump kernel to the minimum required count (bsc#1050536). - qed: LL2 flush isles when connection is closed (bsc#1086314 bsc#1086313 bsc#1086301). - qed: off by one in qed_parse_mcp_trace_buf() (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Populate nvm image attribute shadow (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Refactoring and rearranging FW API with no functional impact (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Refactor mf_mode to consist of bits (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Remove reserveration of dpi for kernel (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Remove unused data member 'is_mf_default' (bsc#1086314 bsc#1086313 bsc#1086301). - qedr: Fix spelling mistake: "hanlde" -> "handle" (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Support drop action classification (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Support other classification modes (bsc#1086314 bsc#1086313 bsc#1086301). - qed: use kzalloc instead of kmalloc and memset (bsc#1086314 bsc#1086313 bsc#1086301). - qed: Use true and false for boolean values (bsc#1086314 bsc#1086313 bsc#1086301). - qed* : use trust mode to allow VF to override forced MAC (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301 ). - qed*: Utilize FW 8.33.1.0 (bsc#1086314 bsc#1086313 bsc#1086301). - qed*: Utilize FW 8.33.11.0 (bsc#1086314 bsc#1086313 bsc#1086301). - qlogic: check kstrtoul() for errors (bsc#1050540). - qlogic/qed: Constify *pkt_type_str (bsc#1086314 bsc#1086313 bsc#1086301). - qmi_wwan: add support for Quectel EG91 (bsc#1051510). - qmi_wwan: add support for the Dell Wireless 5821e module (bsc#1051510). - qmi_wwan: fix interface number for DW5821e production firmware (bsc#1051510). - qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect (bsc#1051510). - r8152: fix tx packets accounting (bsc#1051510). - r8152: napi hangup fix after disconnect (bsc#1051510). - r8169: Be drop monitor friendly (bsc#1051510). - rbd: flush rbd_dev->watch_dwork after watch is unregistered (bsc#1103216). - rdma/cma: Do not query GID during QP state transition to RTR (bsc#1046306). - rdma/cma: Fix use after destroy access to net namespace for IPoIB (bsc#1046306). - rdma/cxgb4: release hw resources on device removal (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - rdma/cxgb4: Use structs to describe the uABI instead of opencoding (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - rdma/i40iw: Avoid panic when objects are being created and destroyed (bsc#1058659). - rdma/i40iw: Avoid reference leaks when processing the AEQ (bsc#1058659). - rdma/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events (bsc#1046307). - rdma/iwpm: fix memory leak on map_info (bsc#1046306 ). - rdma/mlx4: Discard unknown SQP work requests (bsc#1046302 ). - rdma/mlx5: Do not assume that medium blueFlame register exists (bsc#1046305). - rdma/mlx5: Fix memory leak in mlx5_ib_create_srq() error path (bsc#1046305). - rdma/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow (bsc#1046305). - rdma/mlx5: Fix NULL dereference while accessing XRC_TGT QPs (bsc#1046305). - rdma/mlx5: Protect from shift operand overflow (bsc#1046305 ). - rdma/mlx5: Use proper spec flow label type (bsc#1046305 ). - rdma/qedr: Annotate iomem pointers correctly (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Declare local functions static (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: eliminate duplicate barriers on weakly-ordered archs (bsc#1086314 bsc#1086313 bsc#1086301 ). - rdma/qedr: Fix doorbell bar mapping for dpi > 1 (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Fix endian problems around imm_data (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Fix ipv6 destination address resolution (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Fix iWARP connect with port mapper (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Fix iWARP write and send with immediate (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Fix kernel panic when running fio over NFSoRDMA (bsc#1086314 bsc#1086313 bsc#1086301 ). - rdma/qedr: Fix wmb usage in qedr (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: lower print level of flushed CQEs (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Remove set-but-not-used variables (bsc#1086314 bsc#1086313 bsc#1086301). - rdma/qedr: Use NULL instead of 0 to represent a pointer (bsc#1086314 bsc#1086313 bsc#1086301 ). - rdma/qedr: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301 ). - rdma/qedr: Zero stack memory before copying to user space (bsc#1086314 bsc#1086313 bsc#1086301 ). - rdma/ucma: Do not allow setting RDMA_OPTION_IB_PATH without an RDMA device (bsc#1046306). - rdma/ucma: ucma_context reference leak in error path (bsc#1046306). - rdma/uverbs: Protect from attempts to create flows on unsupported QP (bsc#1046306). - rdma/uverbs: Use an unambiguous errno for method not supported (bsc#1046306). - regulator: max8998: Fix platform data retrieval (bsc#1051510). - regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops (bsc#1051510). - regulator: qcom_spmi: Include offset when translating voltages (bsc#1051510). - regulator: tps65218: Fix strobe assignment (bsc#1051510). - Revert "drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios" (bsc#1103356). - Revert "nvme: mark nvme_queue_scan static" (bsc#1054245). - Revert 'nvmet: constify struct nvmet_fabrics_ops' (bsc#1054245). - Revert "xhci: plat: Register shutdown for xhci_plat" (bsc#1090888). - rpm/kernel-source.spec.in: Add more stuff to Recommends ... and move bc to Recommends as well. All these packages are needed for building a kernel manually from scratch with kernel-source files. - rpm/kernel-source.spec.in: require bc for kernel-source This is needed for building include/generated/timeconst.h from kernel/time/timeconst.bc. - rtc: ac100: Fix ac100 determine rate bug (bsc#1051510). - rtc: pxa: fix probe function (bsc#1051510). - rtlwifi: Fix kernel Oops "Fw download fail!!" (bsc#1051510). - rtlwifi: rtl8821ae: fix firmware is not ready to run (bsc#1051510). - rtnetlink: validate attributes in do_setlink() (networking-stable-18_06_08). - s390: add assembler macros for CPU alternatives (git-fixes f19fbd5ed6). - s390/cio: clear timer when terminating driver I/O (bsc#1103421). - s390/cio: fix return code after missing interrupt (bsc#1103421). - s390: correct module section names for expoline code revert (git-fixes f19fbd5ed6). - s390: Correct register corruption in critical section cleanup (git-fixes 6dd85fbb87). - s390/crc32-vx: use expoline for indirect branches (git-fixes f19fbd5ed6). - s390/dasd: fix handling of internal requests (bsc#1103421). - s390/dasd: fix wrongly assigned configuration data (bsc#1103421). - s390/dasd: prevent prefix I/O error (bsc#1103421). - s390/eadm: fix CONFIG_BLOCK include dependency (bsc#1103421). - s390: extend expoline to BC instructions (git-fixes, bsc#1103421). - s390/ftrace: use expoline for indirect branches (git-fixes f19fbd5ed6). - s390/gs: add compat regset for the guarded storage broadcast control block (git-fixes e525f8a6e696). - s390/ipl: ensure loadparm valid flag is set (bsc#1103421). - s390/kernel: use expoline for indirect branches (git-fixes f19fbd5ed6). - s390/lib: use expoline for indirect branches (git-fixes f19fbd5ed6). - s390: move expoline assembler macros to a header (git-fixes f19fbd5ed6). - s390: move spectre sysfs attribute code (bsc#1090098). - s390: optimize memset implementation (git-fixes f19fbd5ed6). - s390/pci: do not require AIS facility (bsc#1103421). - s390/qdio: do not release memory in qdio_setup_irq() (bsc#1103421). - s390/qdio: do not retry EQBS after CCQ 96 (bsc#1102088, LTC#169699). - s390/qeth: fix error handling in adapter command callbacks (bsc#1102088, LTC#169699). - s390/qeth: fix race when setting MAC address (bnc#1093148, LTC#167307). - s390: remove indirect branch from do_softirq_own_stack (git-fixes f19fbd5ed6). - s390: use expoline thunks in the BPF JIT (git-fixes, bsc#1103421). - sched/core: Optimize ttwu_stat() (bnc#1101669 optimise numa balancing for fast migrate). - sched/core: Optimize update_stats_*() (bnc#1101669 optimise numa balancing for fast migrate). - scripts/dtc: fix '%zx' warning (bsc#1051510). - scripts/gdb/linux/tasks.py: fix get_thread_info (bsc#1051510). - scripts/git_sort/git_sort.py: add modules-next tree - scripts/git_sort/git_sort.py: Add 'nvme-4.18' to the list of repositories - scripts/kernel-doc: Do not fail with status != 0 if error encountered with -none (bsc#1051510). - scsi: aacraid: Correct hba_send to include iu_type (bsc#1077989). - scsi: core: clean up generated file scsi_devinfo_tbl.c (bsc#1077989). - scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - scsi: megaraid_sas: Do not log an error if FW successfully initializes (bsc#1077989). - scsi: qla2xxx: Fix inconsistent DMA mem alloc/free (bsc#1077989). - scsi: qla2xxx: Fix kernel crash due to late workqueue allocation (bsc#1077338). - scsi: zfcp: fix infinite iteration on ERP ready list (bsc#1102088, LTC#169699). - scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early return (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for ERP_FAILED (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler (bsc#1102088, LTC#169699). - scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF (bsc#1102088, LTC#169699). - sctp: not allow transport timeout value less than HZ/5 for hb_timer (networking-stable-18_06_08). - serial: earlycon: Only try fdt when specify 'earlycon' exactly (bsc#1051510). - serial: imx: drop if that always evaluates to true (bsc#1051510). - serial: pxa: Fix out-of-bounds access through serial port index (bsc#1051510). - serial: sh-sci: Update warning message in sci_request_dma_chan() (bsc#1051510). - serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version (bsc#1051510). - serial: sirf: Fix out-of-bounds access through DT alias (bsc#1051510). - sfc: stop the TX queue before pushing new buffers (bsc#1058169 ). - smsc75xx: Add workaround for gigabit link up hardware errata (bsc#1051510). - smsc75xx: fix smsc75xx_set_features() (bsc#1051510). - smsc95xx: Configure pause time to 0xffff when tx flow control enabled (bsc#1051510). - soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure (bsc#1051510). - soc: bcm: raspberrypi-power: Fix use of __packed (bsc#1051510). - soc: imx: gpc: de-register power domains only if initialized (bsc#1051510). - soc: imx: gpc: restrict register range for regmap access (bsc#1051510). - soc: imx: gpcv2: correct PGC offset (bsc#1051510). - soc: imx: gpcv2: Do not pass static memory as platform data (bsc#1051510). - soc: imx: gpcv2: fix regulator deferred probe (bsc#1051510). - socket: close race condition between sock_close() and sockfs_setattr() (networking-stable-18_06_20). - soc: mediatek: pwrap: fix compiler errors (bsc#1051510). - soc: qcom: wcnss_ctrl: Fix increment in NV upload (bsc#1051510). - soc: rockchip: power-domain: Fix wrong value when power up pd with writemask (bsc#1051510). - soc/tegra: Fix bad of_node_put() in powergate init (bsc#1051510). - soc/tegra: flowctrl: Fix error handling (bsc#1051510). - soc: ti: ti_sci_pm_domains: Populate name for genpd (bsc#1051510). - soc: zte: Restrict SOC_ZTE to ARCH_ZX or COMPILE_TEST (bsc#1051510). - spi: bcm2835aux: ensure interrupts are enabled for shared handler (bsc#1051510). - spi/bcm63xx-hspi: Enable the clock before calling clk_get_rate() (bsc#1051510). - spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL (bsc#1051510). - spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master (bsc#1051510). - spi: bcm-qspi: fIX some error handling paths (bsc#1051510). - spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo() (bsc#1051510). - spi: core: Fix devm_spi_register_master() function name in kerneldoc (bsc#1051510). - spi: pxa2xx: Allow 64-bit DMA (bsc#1051510). - spi: pxa2xx: check clk_prepare_enable() return value (bsc#1051510). - spi: pxa2xx: Do not touch CS pin until we have a transfer pending (bsc#1051510). - spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR (bsc#1051510). - staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write() (bsc#1051510). - staging: fbtft: array underflow in fbtft_request_gpios_match() (bsc#1051510). - staging: iio: ade7759: fix signed extension bug on shift of a u8 (bsc#1051510). - staging:iio:ade7854: Fix error handling on read/write (bsc#1051510). - staging:iio:ade7854: Fix the wrong number of bits to read (bsc#1051510). - staging: rtl8723bs: add missing range check on id (bsc#1051510). - staging: rtl8723bs: fix u8 less than zero check (bsc#1051510). - staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data() (bsc#1051510). - staging: rts5208: Fix "seg_no" calculation in reset_ms_card() (bsc#1051510). - staging: sm750fb: Fix parameter mistake in poke32 (bsc#1051510). - tcp: verify the checksum of the first data segment in a new connection (networking-stable-18_06_20). - team: use netdev_features_t instead of u32 (networking-stable-18_06_08). - thermal: bcm2835: fix an error code in probe() (bsc#1051510). - thermal/drivers/hisi: Fix kernel panic on alarm interrupt (bsc#1051510). - thermal/drivers/hisi: Fix missing interrupt enablement (bsc#1051510). - thermal/drivers/hisi: Fix multiple alarm interrupts firing (bsc#1051510). - thermal/drivers/hisi: Simplify the temperature/step computation (bsc#1051510). - thermal: exynos: fix setting rising_threshold for Exynos5433 (bsc#1051510). - thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies (bsc#1051510). - timekeeping: Use proper timekeeper for debug code (bsc#1051510). - time: Make sure jiffies_to_msecs() preserves non-zero time periods (bsc#1051510). - tools/libbpf: handle issues with bpf ELF objects containing .eh_frames (bsc#1051510). - tools/lib/lockdep: Define the ARRAY_SIZE() macro (bsc#1051510). - tools/lib/lockdep: Fix undefined symbol prandom_u32 (bsc#1051510). - tools lib traceevent: Fix get_field_str() for dynamic strings (bsc#1051510). - tools lib traceevent: Simplify pointer print logic and fix %pF (bsc#1051510). - tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines (bsc#1051510). - tools/thermal: tmon: fix for segfault (bsc#1051510). - tools/usbip: fixes build with musl libc toolchain (bsc#1051510). - tty: Fix data race in tty_insert_flip_string_fixed_flag (bsc#1051510). - ubi: fastmap: Correctly handle interrupted erasures in EBA (bsc#1051510). - ubifs: Fix data node size for truncating uncompressed nodes (bsc#1051510). - ubifs: Fix potential integer overflow in allocation (bsc#1051510). - ubifs: Fix uninitialized variable in search_dh_cookie() (bsc#1051510). - ubifs: Fix unlink code wrt. double hash lookups (bsc#1051510). - udp: fix rx queue len reported by diag and proc interface (networking-stable-18_06_20). - Update config files: enable CONFIG_I2C_PXA for arm64 (bsc#1101465) - usb: audio-v2: Correct the comment for struct uac_clock_selector_descriptor (bsc#1051510). - usb: cdc_acm: Add quirk for Castles VEGA3000 (bsc#1051510). - usb: cdc_acm: Add quirk for Uniden UBC125 scanner (bsc#1051510). - usb: cdc_acm: prevent race at write to acm while system resumes (bsc#1087092). - usb: core: handle hub C_PORT_OVER_CURRENT condition (bsc#1051510). - usb: do not reset if a low-speed or full-speed device timed out (bsc#1051510). - usb: dwc2: debugfs: Do not touch RX FIFO during register dump (bsc#1051510). - usb: dwc2: Fix DMA alignment to start at allocated boundary (bsc#1051510). - usb: dwc2: Fix dwc2_hsotg_core_init_disconnected() (bsc#1051510). - usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub (bsc#1051510). - usb: dwc2: hcd: Fix host channel halt flow (bsc#1051510). - usb: dwc2: host: Fix transaction errors in host mode (bsc#1051510). - usb: dwc2: Improve gadget state disconnection handling (bsc#1085539). - usb: dwc3: Add SoftReset PHY synchonization delay (bsc#1051510). - usb: dwc3: ep0: Reset TRB counter for ep0 IN (bsc#1051510). - usb: dwc3: Fix GDBGFIFOSPACE_TYPE values (bsc#1051510). - usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue (bsc#1051510). - usb: dwc3: gadget: Set maxpacket size for ep0 IN (bsc#1051510). - usb: dwc3: Makefile: fix link error on randconfig (bsc#1051510). - usb: dwc3: of-simple: fix use-after-free on remove (bsc#1051510). - usb: dwc3: omap: do not miss events during suspend/resume (bsc#1051510). - usb: dwc3: pci: Properly cleanup resource (bsc#1051510). - usb: dwc3: prevent setting PRTCAP to OTG from debugfs (bsc#1051510). - usb: dwc3: Undo PHY init if soft reset fails (bsc#1051510). - usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields (bsc#1051510). - usb: gadget: bdc: 64-bit pointer capability check (bsc#1051510). - usb: gadget: composite: fix incorrect handling of OS desc requests (bsc#1051510). - usb: gadget: core: Fix use-after-free of usb_request (bsc#1051510). - usb: gadget: dummy: fix nonsensical comparisons (bsc#1051510). - usb: gadget: ffs: Execute copy_to_user() with USER_DS set (bsc#1051510). - usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb() (bsc#1051510). - usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS (bsc#1051510). - usb: gadget: f_fs: Only return delayed status when len is 0 (bsc#1051510). - usb: gadget: f_fs: Process all descriptors during bind (bsc#1051510). - usb: gadget: f_fs: Use config_ep_by_speed() (bsc#1051510). - usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc() (bsc#1051510). - usb: gadget: f_mass_storage: Fix the logic to iterate all common->luns (bsc#1051510). - usb: gadget: f_midi: fixing a possible double-free in f_midi (bsc#1051510). - usb: gadget: fsl_udc_core: fix ep valid checks (bsc#1051510). - usb: gadget: f_uac2: fix bFirstInterface in composite gadget (bsc#1051510). - usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3' (bsc#1051510). - usb: gadget: f_uac2: fix error handling in afunc_bind (again) (bsc#1051510). - usb: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() (bsc#1051510). - usb: gadget: udc: change comparison to bitshift when dealing with a mask (bsc#1051510). - usb: gadget: udc: core: update usb_ep_queue() documentation (bsc#1051510). - usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting (bsc#1051510). - usb: host: ehci: use correct device pointer for dma ops (bsc#1087092). - usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" (bsc#1051510). - usb: hub: Do not wait for connect state at resume for powered-off ports (bsc#1051510). - usb: Increment wakeup count on remote wakeup (bsc#1051510). - usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS (bsc#1051510). - usbip: usbip_detach: Fix memory, udev context and udev leak (bsc#1051510). - usbip: usbip_event: fix to not print kernel pointer address (bsc#1051510). - usbip: usbip_host: refine probe and disconnect debug msgs to be useful (bsc#1051510). - usbip: vhci_hcd: Fix usb device and sockfd leaks (bsc#1051510). - usbip: vhci_sysfs: fix potential Spectre v1 (bsc#1051510). - usb: ldusb: add PIDs for new CASSY devices supported by this driver (bsc#1051510). - usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers (bsc#1051510). - usb: musb: fix enumeration after resume (bsc#1051510). - usb: musb: Fix external abort in musb_remove on omap2430 (bsc#1051510). - usb: musb: fix remote wakeup racing with suspend (bsc#1051510). - usb: musb: gadget: misplaced out of bounds check (bsc#1051510). - usb: musb: host: fix potential NULL pointer dereference (bsc#1051510). - usb: musb: trace: fix NULL pointer dereference in musb_g_tx() (bsc#1051510). - usb: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM (bsc#1087092). - usb: option: Add support for FS040U modem (bsc#1087092). - usb: quirks: add delay quirks for Corsair Strafe (bsc#1051510). - usb: serial: ch341: fix type promotion bug in ch341_control_in() (bsc#1051510). - usb: serial: cp210x: add another USB ID for Qivicon ZigBee stick (bsc#1051510). - usb: serial: cp210x: add CESINEL device ids (bsc#1051510). - usb: serial: cp210x: add ELDAT Easywave RX09 id (bsc#1051510). - usb: serial: cp210x: add ID for NI USB serial console (bsc#1051510). - usb: serial: cp210x: add Silicon Labs IDs for Windows Update (bsc#1051510). - usb: serial: ftdi_sio: add RT Systems VX-8 cable (bsc#1051510). - usb: serial: ftdi_sio: add support for Harman FirmwareHubEmulator (bsc#1051510). - usb: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster (bsc#1051510). - usb: serial: keyspan_pda: fix modem-status error handling (bsc#1100132). - usb: serial: mos7840: fix status-register error handling (bsc#1051510). - usb: serial: option: adding support for ublox R410M (bsc#1051510). - usb: serial: option: Add support for Quectel EP06 (bsc#1051510). - usb: serial: option: reimplement interface masking (bsc#1051510). - usb: serial: simple: add libtransistor console (bsc#1051510). - usb: serial: visor: handle potential invalid device configuration (bsc#1051510). - usb-storage: Add compatibility quirk flags for G-Technologies G-Drive (bsc#1051510). - usb-storage: Add support for FL_ALWAYS_SYNC flag in the UAS driver (bsc#1051510). - usb: yurex: fix out-of-bounds uaccess in read handler (bsc#1100132). - vfio/pci: Fix potential Spectre v1 (bsc#1051510). - vfio/spapr: Use IOMMU pageshift rather than pagesize (bsc#1077761, git-fixes). - vhost: synchronize IOTLB message with dev cleanup (networking-stable-18_06_08). - video/omap: add module license tags (bsc#1090888). - video: remove unused kconfig SH_LCD_MIPI_DSI (bsc#1087092). - virtio_balloon: fix another race between migration and ballooning (bsc#1051510). - virtio-net: correctly transmit XDP buff after linearizing (networking-stable-18_06_08). - virtio_net: Disable interrupts if napi_complete_done rescheduled napi (bsc#1051510). - virtio-net: fix leaking page for gso packet during mergeable XDP (networking-stable-18_06_08). - virtio-net: fix module unloading (bsc#1051510). - virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS (bsc#1051510). - virtio_net: fix XDP code path in receive_small() (bsc#1051510). - vmcore: add API to collect hardware dump in second kernel (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584). - vrf: check the original netdevice for generating redirect (networking-stable-18_06_08). - wlcore: add missing nvs file name info for wilink8 (bsc#1051510). - wlcore: sdio: check for valid platform device data before suspend (bsc#1051510). - x.509: unpack RSA signatureValue field from BIT STRING (bsc#1051510). - x86/efi: Access EFI MMIO data as unencrypted when SEV is active (bsc#1099193). - xen/grant-table: log the lack of grants (bnc#1085042). - xhci: Fix kernel oops in trace_xhci_free_virt_device (bsc#1100132). - xhci: Fix USB3 NULL pointer dereference at logical disconnect (bsc#1090888). - xhci: Fix use-after-free in xhci_free_virt_device (bsc#1100132). - xhci: xhci-mem: off by one in xhci_stream_id_to_ring() (bsc#1100132). Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-826=1 Package List: - openSUSE Leap 15.0 (noarch): kernel-devel-4.12.14-lp150.12.10.1 kernel-docs-4.12.14-lp150.12.10.1 kernel-docs-html-4.12.14-lp150.12.10.1 kernel-macros-4.12.14-lp150.12.10.1 kernel-source-4.12.14-lp150.12.10.1 kernel-source-vanilla-4.12.14-lp150.12.10.1 - openSUSE Leap 15.0 (x86_64): kernel-debug-4.12.14-lp150.12.10.1 kernel-debug-base-4.12.14-lp150.12.10.1 kernel-debug-base-debuginfo-4.12.14-lp150.12.10.1 kernel-debug-debuginfo-4.12.14-lp150.12.10.1 kernel-debug-debugsource-4.12.14-lp150.12.10.1 kernel-debug-devel-4.12.14-lp150.12.10.1 kernel-debug-devel-debuginfo-4.12.14-lp150.12.10.1 kernel-default-4.12.14-lp150.12.10.1 kernel-default-base-4.12.14-lp150.12.10.1 kernel-default-base-debuginfo-4.12.14-lp150.12.10.1 kernel-default-debuginfo-4.12.14-lp150.12.10.1 kernel-default-debugsource-4.12.14-lp150.12.10.1 kernel-default-devel-4.12.14-lp150.12.10.1 kernel-default-devel-debuginfo-4.12.14-lp150.12.10.1 kernel-kvmsmall-4.12.14-lp150.12.10.1 kernel-kvmsmall-base-4.12.14-lp150.12.10.1 kernel-kvmsmall-base-debuginfo-4.12.14-lp150.12.10.1 kernel-kvmsmall-debuginfo-4.12.14-lp150.12.10.1 kernel-kvmsmall-debugsource-4.12.14-lp150.12.10.1 kernel-kvmsmall-devel-4.12.14-lp150.12.10.1 kernel-kvmsmall-devel-debuginfo-4.12.14-lp150.12.10.1 kernel-obs-build-4.12.14-lp150.12.10.1 kernel-obs-build-debugsource-4.12.14-lp150.12.10.1 kernel-obs-qa-4.12.14-lp150.12.10.1 kernel-syms-4.12.14-lp150.12.10.1 kernel-vanilla-4.12.14-lp150.12.10.1 kernel-vanilla-base-4.12.14-lp150.12.10.1 kernel-vanilla-base-debuginfo-4.12.14-lp150.12.10.1 kernel-vanilla-debuginfo-4.12.14-lp150.12.10.1 kernel-vanilla-debugsource-4.12.14-lp150.12.10.1 kernel-vanilla-devel-4.12.14-lp150.12.10.1 kernel-vanilla-devel-debuginfo-4.12.14-lp150.12.10.1 References: https://www.suse.com/security/cve/CVE-2017-18344.html https://www.suse.com/security/cve/CVE-2018-5390.html https://bugzilla.suse.com/1012382 https://bugzilla.suse.com/1037697 https://bugzilla.suse.com/1046299 https://bugzilla.suse.com/1046300 https://bugzilla.suse.com/1046302 https://bugzilla.suse.com/1046303 https://bugzilla.suse.com/1046305 https://bugzilla.suse.com/1046306 https://bugzilla.suse.com/1046307 https://bugzilla.suse.com/1046533 https://bugzilla.suse.com/1046543 https://bugzilla.suse.com/1050242 https://bugzilla.suse.com/1050536 https://bugzilla.suse.com/1050538 https://bugzilla.suse.com/1050540 https://bugzilla.suse.com/1051510 https://bugzilla.suse.com/1054245 https://bugzilla.suse.com/1056651 https://bugzilla.suse.com/1056787 https://bugzilla.suse.com/1058169 https://bugzilla.suse.com/1058659 https://bugzilla.suse.com/1060463 https://bugzilla.suse.com/1066110 https://bugzilla.suse.com/1068032 https://bugzilla.suse.com/1075087 https://bugzilla.suse.com/1075360 https://bugzilla.suse.com/1077338 https://bugzilla.suse.com/1077761 https://bugzilla.suse.com/1077989 https://bugzilla.suse.com/1085042 https://bugzilla.suse.com/1085536 https://bugzilla.suse.com/1085539 https://bugzilla.suse.com/1086301 https://bugzilla.suse.com/1086313 https://bugzilla.suse.com/1086314 https://bugzilla.suse.com/1086324 https://bugzilla.suse.com/1086457 https://bugzilla.suse.com/1087092 https://bugzilla.suse.com/1087202 https://bugzilla.suse.com/1087217 https://bugzilla.suse.com/1087233 https://bugzilla.suse.com/1090098 https://bugzilla.suse.com/1090888 https://bugzilla.suse.com/1091041 https://bugzilla.suse.com/1091171 https://bugzilla.suse.com/1093148 https://bugzilla.suse.com/1093666 https://bugzilla.suse.com/1094119 https://bugzilla.suse.com/1096330 https://bugzilla.suse.com/1097583 https://bugzilla.suse.com/1097584 https://bugzilla.suse.com/1097585 https://bugzilla.suse.com/1097586 https://bugzilla.suse.com/1097587 https://bugzilla.suse.com/1097588 https://bugzilla.suse.com/1098633 https://bugzilla.suse.com/1099193 https://bugzilla.suse.com/1100132 https://bugzilla.suse.com/1100884 https://bugzilla.suse.com/1101143 https://bugzilla.suse.com/1101337 https://bugzilla.suse.com/1101352 https://bugzilla.suse.com/1101465 https://bugzilla.suse.com/1101564 https://bugzilla.suse.com/1101669 https://bugzilla.suse.com/1101674 https://bugzilla.suse.com/1101789 https://bugzilla.suse.com/1101813 https://bugzilla.suse.com/1101816 https://bugzilla.suse.com/1102088 https://bugzilla.suse.com/1102097 https://bugzilla.suse.com/1102147 https://bugzilla.suse.com/1102340 https://bugzilla.suse.com/1102512 https://bugzilla.suse.com/1102851 https://bugzilla.suse.com/1103216 https://bugzilla.suse.com/1103220 https://bugzilla.suse.com/1103230 https://bugzilla.suse.com/1103356 https://bugzilla.suse.com/1103421 https://bugzilla.suse.com/1103517 https://bugzilla.suse.com/1103723 https://bugzilla.suse.com/1103724 https://bugzilla.suse.com/1103725 https://bugzilla.suse.com/1103726 https://bugzilla.suse.com/1103727 https://bugzilla.suse.com/1103728 https://bugzilla.suse.com/1103729 https://bugzilla.suse.com/1103730 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2241-1: moderate: Security update for libcgroup
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for libcgroup ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2241-1 Rating: moderate References: #1100365 Cross-References: CVE-2018-14348 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for libcgroup fixes the following issues: The following security vulnerability was fixed: - CVE-2018-14348: Fixed a permission issue with /var/log/cgred. The permissions were not restrictive enough beforehand and ignored any umask setting. (boo#1100365) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-821=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libcgroup-debugsource-0.41-8.3.1 libcgroup-devel-0.41-8.3.1 libcgroup-tools-0.41-8.3.1 libcgroup-tools-debuginfo-0.41-8.3.1 libcgroup1-0.41-8.3.1 libcgroup1-debuginfo-0.41-8.3.1 - openSUSE Leap 42.3 (x86_64): libcgroup1-32bit-0.41-8.3.1 libcgroup1-debuginfo-32bit-0.41-8.3.1 References: https://www.suse.com/security/cve/CVE-2018-14348.html https://bugzilla.suse.com/1100365 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2239-1: moderate: Security update for cups
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for cups ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2239-1 Rating: moderate References: #1050082 #1061066 #1087018 #1096405 #1096406 #1096407 #1096408 Cross-References: CVE-2017-18248 CVE-2018-4180 CVE-2018-4181 CVE-2018-4182 CVE-2018-4183 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves 5 vulnerabilities and has two fixes is now available. Description: This update for cups fixes the following issues: The following security vulnerabilities were fixed: - CVE-2017-18248: Handle invalid characters properly in printing jobs. This fixes a problem that was causing the DBUS library to abort the calling process. (bsc#1061066 bsc#1087018) - Fixed a local privilege escalation to root and sandbox bypasses in the scheduler - CVE-2018-4180: Fixed a local privilege escalation to root in dnssd backend (bsc#1096405) - CVE-2018-4181: Limited local file reads as root via cupsd.conf include directive (bsc#1096406) - CVE-2018-4182: Fixed a sandbox bypass due to insecure error handling (bsc#1096407) - CVE-2018-4183: Fixed a sandbox bypass due to profile misconfiguration (bsc#1096408) The following other issue was fixed: - Fixed authorization check for clients (like samba) connected through the local socket when Kerberos authentication is enabled (bsc#1050082) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-822=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): cups-1.7.5-12.6.1 cups-client-1.7.5-12.6.1 cups-client-debuginfo-1.7.5-12.6.1 cups-ddk-1.7.5-12.6.1 cups-ddk-debuginfo-1.7.5-12.6.1 cups-debuginfo-1.7.5-12.6.1 cups-debugsource-1.7.5-12.6.1 cups-devel-1.7.5-12.6.1 cups-libs-1.7.5-12.6.1 cups-libs-debuginfo-1.7.5-12.6.1 - openSUSE Leap 42.3 (x86_64): cups-libs-32bit-1.7.5-12.6.1 cups-libs-debuginfo-32bit-1.7.5-12.6.1 References: https://www.suse.com/security/cve/CVE-2017-18248.html https://www.suse.com/security/cve/CVE-2018-4180.html https://www.suse.com/security/cve/CVE-2018-4181.html https://www.suse.com/security/cve/CVE-2018-4182.html https://www.suse.com/security/cve/CVE-2018-4183.html https://bugzilla.suse.com/1050082 https://bugzilla.suse.com/1061066 https://bugzilla.suse.com/1087018 https://bugzilla.suse.com/1096405 https://bugzilla.suse.com/1096406 https://bugzilla.suse.com/1096407 https://bugzilla.suse.com/1096408 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2238-1: moderate: Security update for ovmf
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for ovmf ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2238-1 Rating: moderate References: #1077330 #1094290 #1094291 Cross-References: CVE-2018-0739 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves one vulnerability and has two fixes is now available. Description: This update for ovmf provide the following fix: Security issues fixed: - CVE-2018-0739: Update openssl to 1.0.2o to limit ASN.1 constructed types recursive definition depth (bsc#1094290, bsc#1094291). Bug fixes: - Only use SLES-UEFI-CA-Certificate-2048.crt for the SUSE flavor to provide the better compatibility. (bsc#1077330) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-823=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): ovmf-2017+git1492060560.b6d11d7c46-10.1 ovmf-tools-2017+git1492060560.b6d11d7c46-10.1 - openSUSE Leap 42.3 (x86_64): qemu-ovmf-x86_64-debug-2017+git1492060560.b6d11d7c46-10.1 - openSUSE Leap 42.3 (noarch): qemu-ovmf-ia32-2017+git1492060560.b6d11d7c46-10.1 qemu-ovmf-x86_64-2017+git1492060560.b6d11d7c46-10.1 References: https://www.suse.com/security/cve/CVE-2018-0739.html https://bugzilla.suse.com/1077330 https://bugzilla.suse.com/1094290 https://bugzilla.suse.com/1094291 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2237-1: moderate: Security update for kernel-firmware
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for kernel-firmware ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2237-1 Rating: moderate References: #1095735 Cross-References: CVE-2017-5715 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for kernel-firmware to version 20180525 fixes the following issues: This security issue was fixed: - CVE-2017-5715: Prevent unauthorized disclosure of information to an attacker with local user access caused by speculative execution and indirect branch prediction (bsc#1095735) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-825=1 Package List: - openSUSE Leap 15.0 (noarch): kernel-firmware-20180525-lp150.2.3.1 ucode-amd-20180525-lp150.2.3.1 References: https://www.suse.com/security/cve/CVE-2017-5715.html https://bugzilla.suse.com/1095735 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2231-1: moderate: Security update for znc
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for znc ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2231-1 Rating: moderate References: #1101280 #1101281 Cross-References: CVE-2018-14055 CVE-2018-14056 Affected Products: openSUSE Leap 42.3 openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for znc fixes the following issues: - Update to version 1.7.1 * CVE-2018-14055: non-admin user could gain admin privileges and shell access by injecting values into znc.conf (bnc#1101281) * CVE-2018-14056: path traversal in HTTP handler via ../ in a web skin name. (bnc#1101280) - Update to version 1.7.0 * Make ZNC UI translateable to different languages * Configs written before ZNC 0.206 can't be read anymore * Implement IRCv3.2 capabilities away-notify, account-notify, extended-join * Implement IRCv3.2 capabilities echo-message, cap-notify on the "client side" * Update capability names as they are named in IRCv3.2: znc.in/server-time-iso→server-time, znc.in/batch→batch. Old names will continue working for a while, then will be removed in some future version. * Make ZNC request server-time from server when available * Add "AuthOnlyViaModule" global/user setting * Stop defaulting real name to "Got ZNC?" * Add SNI SSL client support * Add support for CIDR notation in allowed hosts list and in trusted proxy list * Add network-specific config for cert validation in addition to user-supplied fingerprints: TrustAllCerts, defaults to false, and TrustPKI, defaults to true. * Add /attach command for symmetry with /detach. Unlike /join it allows wildcards. - Update to version 1.6.6: * Fix use-after-free in znc --makepem. It was broken for a long time, but started segfaulting only now. This is a useability fix, not a security fix, because self-signed (or signed by a CA) certificates can be created without using --makepem, and then combined into znc.pem. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-819=1 - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-819=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): znc-1.7.1-20.3.1 znc-debuginfo-1.7.1-20.3.1 znc-debugsource-1.7.1-20.3.1 znc-devel-1.7.1-20.3.1 znc-perl-1.7.1-20.3.1 znc-perl-debuginfo-1.7.1-20.3.1 znc-python3-1.7.1-20.3.1 znc-python3-debuginfo-1.7.1-20.3.1 znc-tcl-1.7.1-20.3.1 znc-tcl-debuginfo-1.7.1-20.3.1 - openSUSE Leap 42.3 (noarch): znc-lang-1.7.1-20.3.1 - openSUSE Leap 15.0 (x86_64): znc-1.7.1-lp150.2.6.1 znc-debuginfo-1.7.1-lp150.2.6.1 znc-debugsource-1.7.1-lp150.2.6.1 znc-devel-1.7.1-lp150.2.6.1 znc-perl-1.7.1-lp150.2.6.1 znc-perl-debuginfo-1.7.1-lp150.2.6.1 znc-python3-1.7.1-lp150.2.6.1 znc-python3-debuginfo-1.7.1-lp150.2.6.1 znc-tcl-1.7.1-lp150.2.6.1 znc-tcl-debuginfo-1.7.1-lp150.2.6.1 - openSUSE Leap 15.0 (noarch): znc-lang-1.7.1-lp150.2.6.1 References: https://www.suse.com/security/cve/CVE-2018-14055.html https://www.suse.com/security/cve/CVE-2018-14056.html https://bugzilla.suse.com/1101280 https://bugzilla.suse.com/1101281 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2229-1: important: Security update for libofx
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for libofx ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2229-1 Rating: important References: #1058673 #1061964 Cross-References: CVE-2017-2816 CVE-2017-2920 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for libofx fixes the following issues: The following security vulnerabilities have been addressed: - CVE-2017-2920: Fixed an exploitable buffer overflow in the tag parsing functionality, which could result in an out of bounds write and could be triggered via a specially crafted OFX file (boo#1061964) - CVE-2017-2816: Fixed another buffer overflow in the tag parsing functionality, which could result in an stack overflow and could be triggered via a specially crafted OFX file (boo#1058673) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-820=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libofx-0.9.10-7.3.1 libofx-debuginfo-0.9.10-7.3.1 libofx-debugsource-0.9.10-7.3.1 libofx-devel-0.9.10-7.3.1 libofx6-0.9.10-7.3.1 libofx6-debuginfo-0.9.10-7.3.1 References: https://www.suse.com/security/cve/CVE-2017-2816.html https://www.suse.com/security/cve/CVE-2017-2920.html https://bugzilla.suse.com/1058673 https://bugzilla.suse.com/1061964 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2228-1: moderate: Security update for znc
by opensuse-security＠opensuse.org 07 Aug '18

07 Aug '18

openSUSE Security Update: Security update for znc ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2228-1 Rating: moderate References: #1101280 #1101281 Cross-References: CVE-2018-14055 CVE-2018-14056 Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for znc fixes the following issues: - Update to version 1.7.1 * CVE-2018-14055: non-admin user could gain admin privileges and shell access by injecting values into znc.conf (bnc#1101281) * CVE-2018-14056: path traversal in HTTP handler via ../ in a web skin name. (bnc#1101280) - Update to version 1.7.0 * Make ZNC UI translateable to different languages * Configs written before ZNC 0.206 can't be read anymore * Implement IRCv3.2 capabilities away-notify, account-notify, extended-join * Implement IRCv3.2 capabilities echo-message, cap-notify on the "client side" * Update capability names as they are named in IRCv3.2: znc.in/server-time-iso→server-time, znc.in/batch→batch. Old names will continue working for a while, then will be removed in some future version. * Make ZNC request server-time from server when available * Add "AuthOnlyViaModule" global/user setting * Stop defaulting real name to "Got ZNC?" * Add SNI SSL client support * Add support for CIDR notation in allowed hosts list and in trusted proxy list * Add network-specific config for cert validation in addition to user-supplied fingerprints: TrustAllCerts, defaults to false, and TrustPKI, defaults to true. * Add /attach command for symmetry with /detach. Unlike /join it allows wildcards. - Update to version 1.6.6: * Fix use-after-free in znc --makepem. It was broken for a long time, but started segfaulting only now. This is a useability fix, not a security fix, because self-signed (or signed by a CA) certificates can be created without using --makepem, and then combined into znc.pem. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2018-819=1 Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 ppc64le s390x x86_64): znc-1.7.1-2.1 znc-devel-1.7.1-2.1 znc-perl-1.7.1-2.1 znc-python3-1.7.1-2.1 znc-tcl-1.7.1-2.1 - SUSE Package Hub for SUSE Linux Enterprise 12 (noarch): znc-lang-1.7.1-2.1 References: https://www.suse.com/security/cve/CVE-2018-14055.html https://www.suse.com/security/cve/CVE-2018-14056.html https://bugzilla.suse.com/1101280 https://bugzilla.suse.com/1101281 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2215-1: moderate: Security update for rpm
by opensuse-security＠opensuse.org 06 Aug '18

06 Aug '18

openSUSE Security Update: Security update for rpm ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2215-1 Rating: moderate References: #1094735 #1095148 #943457 Cross-References: CVE-2017-7500 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves one vulnerability and has two fixes is now available. Description: This update for rpm fixes the following issues: This security vulnerability was fixed: - CVE-2017-7500: Fixed symlink attacks during RPM installation (bsc#943457) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-808=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): python-rpm-debugsource-4.14.1-lp150.9.3.1 python2-rpm-4.14.1-lp150.9.3.1 python2-rpm-debuginfo-4.14.1-lp150.9.3.1 python3-rpm-4.14.1-lp150.9.3.1 python3-rpm-debuginfo-4.14.1-lp150.9.3.1 rpm-4.14.1-lp150.9.3.1 rpm-build-4.14.1-lp150.9.3.1 rpm-build-debuginfo-4.14.1-lp150.9.3.1 rpm-debuginfo-4.14.1-lp150.9.3.1 rpm-debugsource-4.14.1-lp150.9.3.1 rpm-devel-4.14.1-lp150.9.3.1 - openSUSE Leap 15.0 (x86_64): rpm-32bit-4.14.1-lp150.9.3.1 rpm-32bit-debuginfo-4.14.1-lp150.9.3.1 References: https://www.suse.com/security/cve/CVE-2017-7500.html https://bugzilla.suse.com/1094735 https://bugzilla.suse.com/1095148 https://bugzilla.suse.com/943457 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2214-1: moderate: Security update for libsndfile
by opensuse-security＠opensuse.org 06 Aug '18

06 Aug '18

openSUSE Security Update: Security update for libsndfile ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2214-1 Rating: moderate References: #1071767 #1071777 #1100167 Cross-References: CVE-2017-17456 CVE-2017-17457 CVE-2018-13139 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for libsndfile fixes the following issues: Security issues fixed: - CVE-2018-13139: Fix a stack-based buffer overflow in psf_memset in common.c that allows remote attackers to cause a denial of service (bsc#1100167). - CVE-2017-17456: Prevent segmentation fault in the function d2alaw_array() that may have lead to a remote DoS (bsc#1071777) - CVE-2017-17457: Prevent segmentation fault in the function d2ulaw_array() that may have lead to a remote DoS, a different vulnerability than CVE-2017-14246 (bsc#1071767) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-804=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libsndfile-debugsource-1.0.25-34.1 libsndfile-devel-1.0.25-34.1 libsndfile-progs-1.0.25-34.1 libsndfile-progs-debuginfo-1.0.25-34.1 libsndfile-progs-debugsource-1.0.25-34.1 libsndfile1-1.0.25-34.1 libsndfile1-debuginfo-1.0.25-34.1 - openSUSE Leap 42.3 (x86_64): libsndfile1-32bit-1.0.25-34.1 libsndfile1-debuginfo-32bit-1.0.25-34.1 References: https://www.suse.com/security/cve/CVE-2017-17456.html https://www.suse.com/security/cve/CVE-2017-17457.html https://www.suse.com/security/cve/CVE-2018-13139.html https://bugzilla.suse.com/1071767 https://bugzilla.suse.com/1071777 https://bugzilla.suse.com/1100167 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0