January 2004 - openSUSE Security - openSUSE Mailing Lists

WG: [suse-security] WPA und Linux (SuSE9.0)
by Christian Lange 07 Jan '04

07 Jan '04

Excuse, of course i meant " ... which supports wpa:" Christian Hello Thomas,, as far as i know there is only one driver which supports wep: Have a look at: http://www.linuxant.com Regards, Christian > -----Ursprüngliche Nachricht----- > Von: Thomas Ruch [mailto:thomas@ruchs.de] > Gesendet: Dienstag, 6. Januar 2004 10:42 > An: suse-security(a)suse.com > Betreff: [suse-security] WPA und Linux (SuSE9.0) > > > Hallo allerseits und ein Gesundes Neues, > > Ich habe die Ferienzeit genutzt und ein wenig gebastelt, unter > anderem habe > ich festgestellt, dass mein Wireless-AP auch WPA anstatt WEP zur > Absicherung > kann. Leider fehlen mir dazu ein paar Basisinfos, die ich mir wohl noch > besorgen muss. > Wichtiger wäre mir aber, was ich zur Nutzung von WPA unter Linux tun muss > und ob dies mit meinen alten Tekram-Karten (Prism 2.5) überhaupt geht. > Kann mir da jemand helfen? > > Danke Thomas > > > > -- > Check the headers for your unsubscription address > For additional commands, e-mail: suse-security-help(a)suse.com > Security-related bug reports go to security(a)suse.de, not here >

2 1

another 3-interface firewall problem (two external, no DMZ)
by Dr. Peter M=?ISO-8859-1?B?/A==?=nstermann 07 Jan '04

07 Jan '04

Hi, I am running a small enterprise server under Suse 9.0. The main tasks are: Masquerading an internal network, SMTP, POP3 and web serving. Everything works nice with two interfaces: eth0: 1.2.3.4 netmask 255.255.255.192 (leased line with static IP) eth1: 192.168.0.1 netmask 255.255.255.0 (internal network) with default route 1.2.3.3 Web server is listening on 1.2.3.4, SMTP on both interfaces, POP3 only at the internal interface NOW: to keep traffic costs as low as possible, we like to route the main traffic over a DSL flat rate. Configuring the DSL stuff gives the aditional ppp0 interface (PPPoE with eth2), masquerading works and I can see the web server at 1.2.3.4 due to the additional entry: iptables -A INPUT -i eth1 -s 192.168.0.0/24 -d 1.2.3.4 -j ACCEPT BUT: The address 1.2.3.4 is not responding from the outside any more. Both eth0 and ppp0 are configured as external interfaces in the SuSEfirewall configuration. I think, the problem can be seen as a sort of load balancing for the leaving IP packets. Any hints, how to get the official external IP address working again ? Best regards Peter

5 7

YOU installing wrong kernel?
by Roger Hayter 07 Jan '04

07 Jan '04

On two intel machines, 8.1 and 8.2, YOU has installed k_athlon kernel update instead of the existing k_dflt. Can this be right? -- Roger Hayter

2 1

.viminfo
by Lovette Burland 06 Jan '04

06 Jan '04

Hi When ever I tried to save a file in vi or vim I get this error message. " Can't write viminfo file /root/.viminifor" Hit ENTER or type command to continue. Any advise Lovette Burland ********************************************************************** The information contained in this e-mail message is intended only for the individuals named above. If you are not the intended recipient, you should be aware that any dissemination, distribution, forwarding or other duplication of this communication is strictly prohibited. The views expressed in this e-mail are those of the individual author and not necessarily those of Vivista Limited. Prior to taking any action based upon this e-mail message you should seek appropriate confirmation of its authenticity. If you have received this e-mail in error, please immediately notify the sender by using the e-mail reply facility. ********************************************************************** _____________________________________________________________________ This message has been checked for all known viruses on behalf of Vivista by MessageLabs. http://www.messagelabs.com or Email: mailsweeper.info(a)vivista.co.uk Vivista formerly Securicor Information Systems for further information http://www.vivista.co.uk

2 1

Spam after mail to list
by Philippe Vogel 06 Jan '04

06 Jan '04

Hi! Seems, that everytime I write to the list I get this back (see attachement) as with the any-spam-guy. Here do I see from wich account this comes? Philippe

4 3

SuSE 8.2 Kernel k_smp 2.4.20 patch 102 no quota?
by Philippe Vogel 06 Jan '04

06 Jan '04

Hi! I get this after installing newer kernel and after wanting to enable quotas on our home patition: Failed to turn on quotas : quotaon: using /home/aquota.user on /dev/sda5 [/home]: No such process quotaon: Quota format not supported in kernel. This means no quota with smp-kernel. In the installation of quota I read suse has enabled quota as default. So why is there no quota enabled? Philippe

1 0

Enterprise server 8 not vulnerable to do_mremap()?
by Bjorn Tore Sund 06 Jan '04

06 Jan '04

I notice that SLES 8 is not listed as vulnerable to the do_mremap() vulnerability, and that there's no update. Does this mean that the kernel which came with SP3 in early November was already patched with this? Bjørn -- Bjørn Tore Sund Phone: (+47) 555-84894 Stupidity is like a System administrator Fax: (+47) 555-89672 fractal; universal and Math. Department Mobile: (+47) 918 68075 infinitely repetitive. University of Bergen VIP: 81724 teknisk(a)mi.uib.no Email: bjornts(a)mi.uib.no http://www.mi.uib.no/

4 4

SPAM to the list
by Philippe Vogel 06 Jan '04

06 Jan '04

Hi! It's not funny receiving this spam from: dada.rocha(a)uol.com.br Sourcecode can be seen in the attachement. Is there a possibility to filter such spam from the list, e.g. with an anti-html-mail-filter? Philippe

2 2

Re: Fwd: Enterprise server 8 not vulnerable to do_mremap()?]
by Olaf Kirch 06 Jan '04

06 Jan '04

Hi, On Tue, Jan 06, 2004 at 03:34:18PM +0100, Olaf Kirch wrote: > I notice that SLES 8 is not listed as vulnerable to the do_mremap() That was an oversight, for which we apologize. > vulnerability, and that there's no update. Does this mean that the kernel > which came with SP3 in early November was already patched with this? I just double checked, and updates for SLES8-i386 are indeed available from the maintenance web at http://portal.suse.com/psdb/SuSE-Linux-Enterprise-Server-8-for-x86.html (Don't be fooled by the date which says Dec 2003). Updates for sles8-ppc are available as well, and notification mails should have been sent to all registered maintenance customers. Updates for other architectures and sles7 are in the pipeline but need to pass QA first. Regards, Olaf -- Olaf Kirch | Stop wasting entropy - start using predictable okir(a)suse.de | tempfile names today! ---------------+

3 3

edquota warning after kernel upgrade
by John Whelan 06 Jan '04

06 Jan '04

After applying the most recent kernel upgrade (2.4.21-168), I notice that the edquota command displays the following: "WARNING - Kernel quota is newer than supported. Quotafile used by utils need not be the one used by kernel." The OS is SUSE 8.1 running on an Intel box and the installed quota utils rpm is quota-3.03-239 Can anybody advise on what I should do to eliminate this warning or do I just ignore it? -- ************************************ John Whelan, Dublin City University, Glasnevin, Dublin 9, Ireland. EMAIL: whelanj(a)eeng.dcu.ie FAX: +353-1-7005024 PHONE: +353-1-7005364 ************************************

1 0

Remove this guy! (Was RE:Re: [suse-security] Kernell update (fwd))
by Bjorn Tore Sund 06 Jan '04

06 Jan '04

Will someone please remove this guy from the list? His spam thingy answers every single message sent to the list! And no, I don't want to put myself in any kind of approval list of his. Bjørn -- Bjørn Tore Sund Phone: (+47) 555-84894 Stupidity is like a System administrator Fax: (+47) 555-89672 fractal; universal and Math. Department Mobile: (+47) 918 68075 infinitely repetitive. University of Bergen VIP: 81724 teknisk(a)mi.uib.no Email: bjornts(a)mi.uib.no http://www.mi.uib.no/ ---------- Forwarded message ---------- Date: Tue, 6 Jan 2004 11:31:44 -0200 (BRST) From: AntiSpam UOL <dada.rocha.sspam(a)uol.com.br> To: bjornts <bjornts(a)mi.uib.no> Subject: RE:Re: [suse-security] Kernell update [antispam_txt.gif] [tirateima_txt.gif] [logo_uol_pq.gif] Olá, Você enviou uma mensagem para dada.rocha(a)uol.com.br Para que sua mensagem seja encaminhada, por favor, clique aqui Esta confirmação é necessária porque dada.rocha(a)uol.com.br usa o Antispam UOL, um programa que elimina mensagens enviadas por robôs, como pornografia, propaganda e correntes. As próximas mensagens enviadas para dada.rocha(a)uol.com.br não precisarão ser confirmadas*. *Caso você receba outro pedido de confirmação, por favor, peça para dada.rocha(a)uol.com.br incluí-lo em sua lista de autorizados. Atenção! Se você não conseguir clicar no atalho acima, acesse este endereço: http://tira-teima.as.uol.com.br/challengeSender.html?data=TCmRM%2BPUQB%2Bdj… EvlfsMOTsk%2BORWZ4UQmHFXhbuk3u%2FbVWln3wDCruf%0AYHAzqb1%2BlkGQJgc05mb9oOy25euQML%2BodTQjPQiCh6BN2x4 9bamoumWOP%2FGpMgEKt7ejh8N9NA%3D%3D ___________________________________________________________________________________________________ Hi, You´ve just sent a message to dada.rocha(a)uol.com.br In order to confirm the sent message, please click here This confirmation is necessary because dada.rocha(a)uol.com.br uses Antispam UOL, a service that avoids unwanted messages like advertising, pornography, viruses, and spams. Other messages sent to dada.rocha(a)uol.com.br won't need to be confirmed*. *If you receive another confirmation request, please ask dada.rocha(a)uol.com.br to include you in his/her authorized e-mail list. Warning! If the link doesn´t work, please copy the address below and paste it on your browser: http://tira-teima.as.uol.com.br/challengeSender.html?data=TCmRM%2BPUQB%2Bdj… EvlfsMOTsk%2BORWZ4UQmHFXhbuk3u%2FbVWln3wDCruf%0AYHAzqb1%2BlkGQJgc05mb9oOy25euQML%2BodTQjPQiCh6BN2x4 9bamoumWOP%2FGpMgEKt7ejh8N9NA%3D%3D Use o AntiSpam UOL e proteja sua caixa postal

3 2

Kernell update
by Raul H. Lapitzondo 06 Jan '04

06 Jan '04

I need help !. it is as simple as this? rpm -Uvh fileUpdateKernell.rpm Saludos Raùl

7 10

[Fwd: RE:Re: [suse-security] Kernell update]
by Raul H. Lapitzondo 06 Jan '04

06 Jan '04

Yes... look at this... Who is ??? -------- Mensaje Original -------- Asunto: RE:Re: [suse-security] Kernell update De: AntiSpam UOL <dada.rocha.sspam(a)uol.com.br> Fecha: Mar, 6 de Enero de 2004, 10:46 Para: rlapitz <rlapitz(a)lapi.hn.org>     Olá, Você enviou uma mensagem para dada.rocha(a)uol.com.br Para que sua mensagem seja encaminhada, por favor, clique aqui   Esta confirmação é necessária porque dada.rocha(a)uol.com.br usa o Antispam UOL, um programa que elimina mensagens enviadas por robôs, como pornografia, propaganda e correntes. As próximas mensagens enviadas para dada.rocha(a)uol.com.br não precisarão ser confirmadas*. *Caso você receba outro pedido de confirmação, por favor, peça para dada.rocha(a)uol.com.br incluí-lo em sua lista de autorizados. Atenção! Se você não conseguir clicar no atalho acima, acesse este endereço: http://tira-teima.as.uol.com.br/challengeSender.html?data=TCmRM%2BPUQB%2Bdj…     Hi, You´ve just sent a message to dada.rocha(a)uol.com.br In order to confirm the sent message, please click here   This confirmation is necessary because dada.rocha(a)uol.com.br uses Antispam UOL, a service that avoids unwanted messages like advertising, pornography, viruses, and spams. Other messages sent to dada.rocha(a)uol.com.br won't need to be confirmed*. *If you receive another confirmation request, please ask dada.rocha(a)uol.com.br to include you in his/her authorized e-mail list. Warning! If the link doesn´t work, please copy the address below and paste it on your browser: http://tira-teima.as.uol.com.br/challengeSender.html?data=TCmRM%2BPUQB%2Bdj… Use o AntiSpam UOL e proteja sua caixa postal RdFhCfCggWeb = '1996-';

1 0

WPA und Linux (SuSE9.0)
by Thomas Ruch 06 Jan '04

06 Jan '04

Hallo allerseits und ein Gesundes Neues, Ich habe die Ferienzeit genutzt und ein wenig gebastelt, unter anderem habe ich festgestellt, dass mein Wireless-AP auch WPA anstatt WEP zur Absicherung kann. Leider fehlen mir dazu ein paar Basisinfos, die ich mir wohl noch besorgen muss. Wichtiger wäre mir aber, was ich zur Nutzung von WPA unter Linux tun muss und ob dies mit meinen alten Tekram-Karten (Prism 2.5) überhaupt geht. Kann mir da jemand helfen? Danke Thomas

2 1

Fwd: [suse-security] WPA und Linux (SuSE9.0)
by Thomas Ruch 06 Jan '04

06 Jan '04

1 0

kernel do_mremap local privilege escalation vulnerability
by Radu Voicu 06 Jan '04

06 Jan '04

http://isec.pl/vulnerabilities/isec-0013-mremap.txt Hi there! Did anybody knows if SuSE kernels are vulnerable to this one? And if it is, when will be the patch available? P.S. Sorry if I repeat the questions asked by others today

12 17

Strange sendmail process
by Stefan.Junge＠ssi-schaefer.de 06 Jan '04

06 Jan '04

Hello list ! I have got a SUSE 8.0 box with postfix (Version 20010228pl08, release 22) installed an connected to inet. The latest patches are installed. I have checked the system with ps -aux an got the following 2 processes: root 30885 0.0 0.1 4284 1376 ? S 00:00 0:00 /usr/sbin/sendmail -FCronDaemon -odi -oem root root 30886 0.0 0.1 4276 1372 ? S 00:00 0:00 /usr/sbin/postdrop -r Does anybody know something about the origin ? Stefan

3 3

regarding the new kernel exploits/bugs :: suse linux 7.3 unsupported / eol by now?
by Andreas Bittner 06 Jan '04

06 Jan '04

hi there, i was wondering, if suse linux 7.3 went eol/unsupported by now, as i dont see any patches/urls in the sec announcement postings for the 7.3 release of suse linux. any hints? did i miss that 7.3 is gone? thanks, andy

2 1

AW: [suse-security] Strange sendmail process
by Stefan.Junge＠ssi-schaefer.de 06 Jan '04

06 Jan '04

Hello Sandro, Yes I run postfix ! And the answer is rpm -qf /usr/sbin/sendmail ! Now I found the paragraph at the postfix configuration file. Another admin changed the configuration without my knowledge. Thats´s the reason why the process was "strange". Thank you for your advice ! Stefan

1 0

[SA10533] Linux Kernel Real Time Clock Kernel Memory Disclosure Vulnerability (fwd)
by Hubertus Haniel 06 Jan '04

06 Jan '04

I take it this is not covered in the the do_mremap kernel update? ---------- Forwarded message ---------- Date: Mon, 5 Jan 2004 19:16:19 +0100 From: Secunia Security Advisories <sec-adv(a)secunia.com> TITLE: Linux Kernel Real Time Clock Kernel Memory Disclosure Vulnerability SECUNIA ADVISORY ID: SA10533 VERIFY ADVISORY: http://www.secunia.com/advisories/10533/ CRITICAL: Less critical IMPACT: Exposure of system information, Exposure of sensitive information WHERE: Local system OPERATING SYSTEM: Linux Kernel 2.4.x DESCRIPTION: A vulnerability has been reported in the Linux kernel, which potentially can be exploited by malicious, local users to gain knowledge of sensitive information. The vulnerability is caused due to an unspecified error in "/dev/rtc" real time clock routines, which may disclose parts of kernel memory to unprivileged users. SOLUTION: Update to version 2.4.24. http://www.kernel.org/ PROVIDED AND/OR DISCOVERED BY: Reported by vendor. ORIGINAL ADVISORY: http://www.kernel.org/pub/linux/kernel/v2.4/ChangeLog-2.4.24 ---------------------------------------------------------------------- About: This Advisory was delivered by Secunia as a free service to help everybody keeping their systems up to date against the latest vulnerabilities. Subscribe: http://www.secunia.com/secunia_security_advisories/ Definitions: (Criticality, Where etc.) http://www.secunia.com/about_secunia_advisories/ Please Note: Secunia recommends that you verify all advisories you receive by clicking the link. Secunia NEVER sends attached files with advisories. Secunia does not advise people to install third party patches, only use those supplied by the vendor. ---------------------------------------------------------------------- Unsubscribe: Secunia Security Advisories http://www.secunia.com/sec_adv_unsubscribe/?email=hubba@unixcook.com ----------------------------------------------------------------------

3 2

SUSE Security Announcement: Linux Kernel (SuSE-SA:2004:001)
by thomas＠suse.de 05 Jan '04

05 Jan '04

-----BEGIN PGP SIGNED MESSAGE----- ______________________________________________________________________________ SUSE Security Announcement Package: Linux Kernel Announcement-ID: SuSE-SA:2004:001 Date: Monday, Jan 5th 2004 20:27 MET Affected products: 8.0, 8.1, 8.2, 9.0 SuSE Linux Enterprise Server 7, SuSE Linux Database Server, SuSE eMail Server III, 3.1 SuSE Linux Firewall on CD/Admin host SuSE Linux Office Server SuSE Linux Desktop 1.0 SuSE Linux School Server Vulnerability Type: local system compromise Severity (1-10): 6 SUSE default package: yes Cross References: Content of this advisory: 1) security vulnerability resolved: - incorrect bounds checking problem description, discussion, solution and upgrade information 2) pending vulnerabilities, solutions, workarounds: - mc - mod_gzip - tripwire - cvs - irssi - atftp 3) standard appendix (further information) ______________________________________________________________________________ 1) problem description, brief discussion, solution, upgrade information The do_mremap() function of the Linux Kernel is used to manage (move, resize) Virtual Memory Areas (VMAs). By exploiting an incorrect bounds check in do_mremap() during the remapping of memory it is possible to create a VMA with the size of 0. In normal operation do_mremap() leaves a memory hole of one page and creates an additional VMA of two pages. In case of exploitation no hole is created but the new VMA has a 0 bytes length. The Linux Kernel's memory management is corrupted from this point and can be abused by local users to gain root privileges. There is no temporary workaround for this bug. Please note that on 8.1, the kernel-source package may not be installable through rpm, because of a bug in RPM (update of the kernel source RPM may take 30 minutes or more, or fail entirely). Owing to this problem, the kernel source is not available as a regular YOU update. However, recognizing our obligation to publish the source along with the binary packages, we are making the source available as a compressed tar archive, downloadable from the normal FTP locations SPECIAL INSTALL INSTRUCTIONS: ============================== The following paragraphs will guide you through the installation process in a step-by-step fashion. The character sequence "****" marks the beginning of a new paragraph. In some cases, you decide if the paragraph is needed for you or not. Please read through all of the steps down to the end. All of the commands that need to be executed are required to be run as the superuser (root). Each step relies on the steps before to complete successfully. **** Step 1: Determine the needed kernel type Please use the following command to find the kernel type that is installed on your system: rpm -qf /boot/vmlinuz The following options are possible (disregarding the version and build number following the name, separated by the "-" character): k_deflt # default kernel, good for most systems. k_i386 # kernel for older processors and chipsets k_athlon # kernel made specifically for AMD Athlon(tm) family processors k_psmp # kernel for Pentium-I dual processor systems k_smp # kernel for SMP systems (Pentium-II and above) k_smp4G # kernel for SMP systems which supports a maximum of 4G of RAM **** Step 2: Download the package for your system Please download the kernel RPM package for your distribution with the name starting as indicated by Step 1. The list of all kernel rpm packages is appended below. Note: The kernel-source package does not contain any binary kernel in bootable form. Instead, it contains the sources that the binary kernel rpm packages are made from. It can be used by administrators who have decided to build their own kernel. Since the kernel-source.rpm is an installable (compiled) package that contains sources for the linux kernel, it is not the source RPM for the kernel RPM binary packages. The kernel RPM binary packages for the distributions can be found at these locations below ftp://ftp.suse.com/pub/suse/i386/update/. 8.0/images/ 8.1/rpm/i586 8.2/rpm/i586 9.0/rpm/i586 After downloading the kernel RPM package for your system, you should verify the authenticity of the kernel rpm package using the methods as listed in section 3) of each SUSE Security Announcement. **** Step 3: Installing your kernel rpm package Install the rpm package that you have downloaded in Steps 3 or 4 with the command rpm -Uhv --nodeps --force <K_FILE.RPM> where <K_FILE.RPM> is the name of the rpm package that you downloaded. Warning: After performing this step, your system will likely not be able to boot if the following steps have not been fully applied. If you run SUSE LINUX 8.1 and haven't applied the previous kernel update (SUSE-SA:2003:034), AND use the freeswan package, you also need to update the freeswan rpm as a dependency as offered by YOU (Yast Online Update). The package can be downloaded from ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/ **** Step 4: configuring and creating the initrd The initrd is a ramdisk that is being loaded into the memory of your system together with the kernel boot image by the bootloader. The kernel uses the content of this ramdisk to execute commands that must be run before the kernel can mount its actual root filesystem. It is usually used to initialize scsi drivers or NIC drivers for diskless operation. The variable INITRD_MODULES in /etc/sysconfig/kernel determines which kernel modules will be loaded in the initrd before the kernel has mounted its actual root filesystem. The variable should contain your scsi adapter (if any) or filesystem driver modules. With the installation of the new kernel, the initrd has to be re-packed with the update kernel modules. Please run the command mk_initrd as root to create a new init ramdisk (initrd) for your system. On SuSE Linux 8.1 and later, this is done automatically when the RPM is installed. **** Step 5: bootloader If you have a 7.x system, you must now run the command lilo as root to initialize the lilo bootloader for your system. Then proceed to the next step. If you run a SUSE LINUX 8.x or a SLES8 system, there are two options: Depending on your software configuration, you have the lilo bootloader or the grub bootloader installed and initialized on your system. The grub bootloader does not require any further actions to be performed after the new kernel images have been moved in place by the rpm Update command. If you have a lilo bootloader installed and initialized, then the lilo program must be run as root. Use the command grep LOADER_TYPE /etc/sysconfig/bootloader to find out which boot loader is configured. If it is lilo, then you must run the lilo command as root. If grub is listed, then your system does not require any bootloader initialization. Warning: An improperly installed bootloader may render your system unbootable. **** Step 6: reboot If all of the steps above have been successfully applied to your system, then the new kernel including the kernel modules and the initrd should be ready to boot. The system needs to be rebooted for the changes to become active. Please make sure that all steps are complete, then reboot using the command shutdown -r now or init 6 Your system should now shut down and reboot with the new kernel. Our maintenance customers are being notified individually. The packages are being offered to install from the maintenance web. Please download the update package for your distribution and verify its integrity by the methods listed in section 3) of this announcement. Then, install the package using the command "rpm -Fhv file.rpm" to apply the update. Our maintenance customers are being notified individually. The packages are being offered to install from the maintenance web. Missing packages will be published later. Intel i386 Platform: SuSE-9.0: ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/k_athlon-2.4.21-166.i5… 0bbda4a9166edcdd4444fa43a5b37f10 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/k_athlon-2.4.21-166.src… 3cce21862c2d54a82742c74557dcc7fa ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/k_deflt-2.4.21-166.i58… 6df247b9f114e8636de2c673747ef6ea source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/k_deflt-2.4.21-166.src.… c06a81d1e7912db429df25e8e8d754b7 ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/k_smp-2.4.21-166.i586.… 0da9470eb573ecb5c801bedbd5dbf666 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/k_smp-2.4.21-166.src.rpm 34393ea6b46a8b8859d51020e1dc275e ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/k_smp4G-2.4.21-166.i58… 0b0d23a4a6918e57a1e7c45504a50df7 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/k_smp4G-2.4.21-166.src.… 26cadc4c9d77dc6e433bedc458166236 ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/k_um-2.4.21-166.i586.r… 7e18d9b0b89ef72bee40bbf150dd0470 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/k_um-2.4.21-166.src.rpm ad8c357792c0d34570c9ba54a579d867 ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/i586/kernel-source-2.4.21-1… 48b46c943cc15aacfba0ec68090de1f6 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/9.0/rpm/src/kernel-source-2.4.21-16… ef71c55f61b595edc24be7c318237432 SuSE-8.2: ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/i586/k_athlon-2.4.20-102.i5… 61de636fab3149ee5d45d16dccf8d0e8 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/src/k_athlon-2.4.20-102.src… 80b8f44b6f8f4d039b8954c709b457b0 ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/i586/k_deflt-2.4.20-102.i58… c25b57bc5d67d87177abf7953f022331 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/src/k_deflt-2.4.20-102.src.… 29d014e79a3ee0b14a23cb0e4bdd0f0e ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/i586/k_smp-2.4.20-102.i586.… d42041b08cdee2d9959a4a6dad8b6e9d source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/src/k_smp-2.4.20-102.src.rpm 22e598ebf546cd9378c852042b602f2f ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/i586/k_psmp-2.4.20-102.i586… c2e0455b45eac55c97e13322ab40e4bc source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/src/k_psmp-2.4.20-102.src.r… 68b2d35ae0de009ac3fbc6ee9a0bb3fd ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/i586/kernel-source-2.4.20.S… 0f539af39523fd27232289014db36202 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.2/rpm/src/kernel-source-2.4.20.Su… 14c238bbbd7758abc2b4113a7297f2b5 SuSE-8.1: ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/k_athlon-2.4.21-168.i5… 8299b1153d3d9d81236e4e77f3ae66e2 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/src/k_athlon-2.4.21-168.src… 0705e6bb739aaec77bc9801760e60051 ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/k_deflt-2.4.21-168.i58… fea1ffe95acdbc5c00d3272b3867bd39 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/src/k_deflt-2.4.21-168.src.… aeff9339c71c275fd3c7e9ebcf49cc4f ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/k_smp-2.4.21-168.i586.… f4e41bdd0806673d82dc0971e36da0e1 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/src/k_smp-2.4.21-168.src.rpm f352afbf4c6d679fd4bf40347bd7989c ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/k_debug-2.4.21-168.i58… 81e9a2516e7b9a8d0234f2d6ee9e4444 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/src/k_debug-2.4.21-168.src.… 8b6c8e51c93c9dcbf5d34587de722a4a ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/i586/k_psmp-2.4.21-168.i586… 9961f14d44c40a83be800ad463e17e51 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.1/rpm/src/k_psmp-2.4.21-168.src.r… f3caa2e715d24a2987408e29e0623737 SuSE-8.0: ftp://ftp.suse.com/pub/suse/i386/update/8.0/images/k_deflt-2.4.18-282.i386.… 62ae55de1c6abbe821b99165cbccdce7 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.0/zq1/k_deflt-2.4.18-282.src.rpm c65eadb1dd7225463f7a29979ab43dd8 ftp://ftp.suse.com/pub/suse/i386/update/8.0/images/k_smp-2.4.18-282.i386.rpm 7fdec3995171a6d88f293c10c41e6991 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.0/zq1/k_smp-2.4.18-282.src.rpm 08a2cba4382f4bb8adfc5cb8f80677d1 ftp://ftp.suse.com/pub/suse/i386/update/8.0/images/k_psmp-2.4.18-282.i386.r… 955386318df968aac6c66b6071eb466a source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.0/zq1/k_psmp-2.4.18-282.src.rpm fe87f59c3e818fbb9eedcb211f9d0bf4 ftp://ftp.suse.com/pub/suse/i386/update/8.0/d3/kernel-source-2.4.18.SuSE-28… 249a3cd1dcc1edaabf00d72874ba4aa2 source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.0/zq1/kernel-source-2.4.18.SuSE-2… 7e5cbc3af87fdedbd8b6dc829e038d63 ftp://ftp.suse.com/pub/suse/i386/update/8.0/images/k_i386-2.4.18-282.i386.r… bd80346beef2e459009584065fccc7eb source rpm(s): ftp://ftp.suse.com/pub/suse/i386/update/8.0/zq1/k_i386-2.4.18-282.src.rpm ce704a3481d8b84f9fdd0b83784e74a6 Opteron x86_64 Platform: SuSE-9.0: ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/x86_64/k_deflt-2.4.21-171… 3dd54a4105bad6c4f3084e70aaa45410 source rpm(s): ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/src/k_deflt-2.4.21-171.sr… d88ca0142409a98a7e4e9f4f7b2e9bf8 ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/x86_64/k_smp-2.4.21-171.x… b97e9d91ef710b0b801536294d99ba1a source rpm(s): ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/src/k_smp-2.4.21-171.src.… 6221b0f5893499f5926c9dd529fceb5c ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/x86_64/kernel-source-2.4.… 1a27668dff4ae3c405f18399432a326e source rpm(s): ftp://ftp.suse.com/pub/suse/x86_64/update/9.0/rpm/src/kernel-source-2.4.21-… 301e1d8ac232d3a000f373a928deee5f ______________________________________________________________________________ 2) Pending vulnerabilities in SUSE Distributions and Workarounds: - mc By using a special combination of links in archive-files it is possible to execute arbitrary commands while mc tries to open it in its VFS. The packages will be release as soon. - mod_gzip The apache module mod_gzip is vulnerable to remote code execution while running in debug-mode. We do not ship this module in debug-mode but future versions will include the fix. Additionally the mod_gzip code was audited to fix more possible security related bugs. - tripwire Tripwire is a file integrity checker. The tripwire version on SuSE Linux 8.2 and 9.0 do crash when a requested file does not exists. New packages will be available soon. - cvs The cvs server-side can be tricked to create files in the root filesystem of the server by requesting malformed modules. The permissions on the root filesystem normally prevent this malfunction. New packages will be available soon. - irssi Under special circumstances the the irc-client irssi can be crashed remotely by other irc-clients. New packages are available on our FTP servers. - atftp A buffer overflow vulnerability discovered by Rick Patel has been fixed in the atftpd (trivial file transfer protocol, UDP oriented) daemon, contained in the atftp package. Update packages for the affected SUSE Linux distributions 8.1 and 8.2 have been published on our ftp server today. We explicitly thank Dirk Mueller, KDE developer, for notifying SUSE Security about the pending treatment of this incident. New packages are available on our FTP servers. ______________________________________________________________________________ 3) standard appendix: authenticity verification, additional information - Package authenticity verification: SUSE update packages are available on many mirror ftp servers all over the world. While this service is being considered valuable and important to the free and open source software community, many users wish to be sure about the origin of the package and its content before installing the package. There are two verification methods that can be used independently from each other to prove the authenticity of a downloaded file or rpm package: 1) md5sums as provided in the (cryptographically signed) announcement. 2) using the internal gpg signatures of the rpm package. 1) execute the command md5sum <name-of-the-file.rpm> after you downloaded the file from a SUSE ftp server or its mirrors. Then, compare the resulting md5sum with the one that is listed in the announcement. Since the announcement containing the checksums is cryptographically signed (usually using the key security(a)suse.de), the checksums show proof of the authenticity of the package. We disrecommend to subscribe to security lists which cause the email message containing the announcement to be modified so that the signature does not match after transport through the mailing list software. Downsides: You must be able to verify the authenticity of the announcement in the first place. If RPM packages are being rebuilt and a new version of a package is published on the ftp server, all md5 sums for the files are useless. 2) rpm package signatures provide an easy way to verify the authenticity of an rpm package. Use the command rpm -v --checksig <file.rpm> to verify the signature of the package, where <file.rpm> is the filename of the rpm package that you have downloaded. Of course, package authenticity verification can only target an un-installed rpm package file. Prerequisites: a) gpg is installed b) The package is signed using a certain key. The public part of this key must be installed by the gpg program in the directory ~/.gnupg/ under the user's home directory who performs the signature verification (usually root). You can import the key that is used by SUSE in rpm packages for SUSE Linux by saving this announcement to a file ("announcement.txt") and running the command (do "su -" to be root): gpg --batch; gpg < announcement.txt | gpg --import SUSE Linux distributions version 7.1 and thereafter install the key "build(a)suse.de" upon installation or upgrade, provided that the package gpg is installed. The file containing the public key is placed at the top-level directory of the first CD (pubring.gpg) and at ftp://ftp.suse.com/pub/suse/pubring.gpg-build.suse.de . - SUSE runs two security mailing lists to which any interested party may subscribe: suse-security(a)suse.com - general/linux/SUSE security discussion. All SUSE security announcements are sent to this list. To subscribe, send an email to <suse-security-subscribe(a)suse.com>. suse-security-announce(a)suse.com - SUSE's announce-only mailing list. Only SUSE's security announcements are sent to this list. To subscribe, send an email to <suse-security-announce-subscribe(a)suse.com>. For general information or the frequently asked questions (faq) send mail to: <suse-security-info(a)suse.com> or <suse-security-faq(a)suse.com> respectively. ===================================================================== SUSE's security contact is <security(a)suse.com> or <security(a)suse.de>. The <security(a)suse.de> public key is listed below. ===================================================================== ______________________________________________________________________________ The information in this advisory may be distributed or reproduced, provided that the advisory is not modified in any way. In particular, it is desired that the clear-text signature shows proof of the authenticity of the text. SUSE Linux AG makes no warranties of any kind whatsoever with respect to the information contained in this security advisory. Type Bits/KeyID Date User ID pub 2048R/3D25D3D9 1999-03-06 SuSE Security Team <security(a)suse.de> pub 1024D/9C800ACA 2000-10-19 SuSE Package Signing Key <build(a)suse.de> - -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org mQGiBDnu9IERBACT8Y35+2vv4MGVKiLEMOl9GdST6MCkYS3yEKeueNWc+z/0Kvff 4JctBsgs47tjmiI9sl0eHjm3gTR8rItXMN6sJEUHWzDP+Y0PFPboMvKx0FXl/A0d M+HFrruCgBlWt6FA+okRySQiliuI5phwqkXefl9AhkwR8xocQSVCFxcwvwCglVcO QliHu8jwRQHxlRE0tkwQQI0D+wfQwKdvhDplxHJ5nf7U8c/yE/vdvpN6lF0tmFrK XBUX+K7u4ifrZlQvj/81M4INjtXreqDiJtr99Rs6xa0ScZqITuZC4CWxJa9GynBE D3+D2t1V/f8l0smsuYoFOF7Ib49IkTdbtwAThlZp8bEhELBeGaPdNCcmfZ66rKUd G5sRA/9ovnc1krSQF2+sqB9/o7w5/q2qiyzwOSTnkjtBUVKn4zLUOf6aeBAoV6NM CC3Kj9aZHfA+ND0ehPaVGJgjaVNFhPi4x0e7BULdvgOoAqajLfvkURHAeSsxXIoE myW/xC1sBbDkDUIBSx5oej73XCZgnj/inphRqGpsb+1nKFvF+rQoU3VTRSBQYWNr YWdlIFNpZ25pbmcgS2V5IDxidWlsZEBzdXNlLmRlPohcBBMRAgAcBQI57vSBBQkD wmcABAsKAwQDFQMCAxYCAQIXgAAKCRCoTtronIAKyl8sAJ98BgD40zw0GHJHIf6d NfnwI2PAsgCgjH1+PnYEl7TFjtZsqhezX7vZvYCIRgQQEQIABgUCOnBeUgAKCRCe QOMQAAqrpNzOAKCL512FZvv4VZx94TpbA9lxyoAejACeOO1HIbActAevk5MUBhNe LZa/qM2JARUDBRA6cGBvd7LmAD0l09kBATWnB/9An5vfiUUE1VQnt+T/EYklES3t XXaJJp9pHMa4fzFa8jPVtv5UBHGee3XoUNDVwM2OgSEISZxbzdXGnqIlcT08TzBU D9i579uifklLsnr35SJDZ6ram51/CWOnnaVhUzneOA9gTPSr+/fT3WeVnwJiQCQ3 0kNLWVXWATMnsnT486eAOlT6UNBPYQLpUprF5Yryk23pQUPAgJENDEqeU6iIO9Ot 1ZPtB0lniw+/xCi13D360o1tZDYOp0hHHJN3D3EN8C1yPqZd5CvvznYvB6bWBIpW cRgdn2DUVMmpU661jwqGlRz1F84JG/xe4jGuzgpJt9IXSzyohEJB6XG5+D0BiF0E ExECAB0FAjxqqTQFCQoAgrMFCwcKAwQDFQMCAxYCAQIXgAAKCRCoTtronIAKyp1f AJ9dR7saz2KPNwD3U+fy/0BDKXrYGACfbJ8fQcJqCBQxeHvt9yMPDVq0B0W5Ag0E Oe70khAIAISR0E3ozF/la+oNaRwxHLrCet30NgnxRROYhPaJB/Tu1FQokn2/Qld/ HZnh3TwhBIw1FqrhWBJ7491iAjLR9uPbdWJrn+A7t8kSkPaF3Z/6kyc5a8fas44h t5h+6HMBzoFCMAq2aBHQRFRNp9Mz1ZvoXXcI1lk1l8OqcUM/ovXbDfPcXsUVeTPT tGzcAi2jVl9hl3iwJKkyv/RLmcusdsi8YunbvWGFAF5GaagYQo7YlF6UaBQnYJTM 523AMgpPQtsKm9o/w9WdgXkgWhgkhZEeqUS3m5xNey1nLu9iMvq9M/iXnGz4sg6Q 2Y+GqZ+yAvNWjRRou3zSE7Bzg28MI4sAAwYH/2D71Xc5HPDgu87WnBFgmp8MpSr8 QnSs0wwPg3xEullGEocolSb2c0ctuSyeVnCttJMzkukL9TqyF4s/6XRstWirSWaw JxRLKH6Zjo/FaKsshYKf8gBkAaddvpl3pO0gmUYbqmpQ3xDEYlhCeieXS5MkockQ 1sj2xYdB1xO0ExzfiCiscUKjUFy+mdzUsUutafuZ+gbHog1CN/ccZCkxcBa5IFCH ORrNjq9pYWlrxsEn6ApsG7JJbM2besW1PkdEoxak74z1senh36m5jQvVjA3U4xq1 wwylxadmmJaJHzeiLfb7G1ZRjZTsB7fyYxqDzMVul6o9BSwO/1XsIAnV1uuITAQY EQIADAUCOe70kgUJA8JnAAAKCRCoTtronIAKyksiAJsFB3/77SkH3JlYOGrEe1Ol 0JdGwACeKTttgeVPFB+iGJdiwQlxasOfuXyITAQYEQIADAUCPGqpWQUJCgCCxwAK CRCoTtronIAKyofBAKCSZM2UFyta/fe9WgITK9I5hbxxtQCfX+0ar2CZmSknn3co SPihn1+OBNyZAQ0DNuEtBAAAAQgAoCRcd7SVZEFcumffyEwfLTcXQjhKzOahzxpo omuF+HIyU4AGq+SU8sTZ/1SsjhdzzrSAfv1lETACA+3SmLr5KV40Us1w0UC64cwt A46xowVq1vMlH2Lib+V/qr3b1hE67nMHjysECVx9Ob4gFuKNoR2eqnAaJvjnAT8J /LoUC20EdCHUqn6v+M9t/WZgC+WNR8cq69uDy3YQhDP/nIan6fm2uf2kSV9A7ZxE GrwsWl/WX5Q/sQqMWaU6r4az98X3z90/cN+eJJ3vwtA+rm+nxEvyev+jaLuOQBDf ebh/XA4FZ35xmi+spdiVeJH4F/ubaGlmj7+wDOF3suYAPSXT2QAFEbQlU3VTRSBT ZWN1cml0eSBUZWFtIDxzZWN1cml0eUBzdXNlLmRlPokBFQMFEDbhLUfkWLKHsco8 RQEBVw4H/1vIdiOLX/7hdzYaG9crQVIk3QwaB5eBbjvLEMvuCZHiY2COUg5QdmPQ 8SlWNZ6k4nu1BLcv2g/pymPUWP9fG4tuSnlUJDrWGm3nhyhAC9iudP2u1YQY37Gb B6NPVaZiYMnEb4QYFcqv5c/r2ghSXUTYk7etd6SW6WCOpEqizhx1cqDKNZnsI/1X 11pFcO2N7rc6byDBJ1T+cK+F1Ehan9XBt/shryJmv04nli5CXQMEbiqYYMOu8iaA 8AWRgXPCWqhyGhcVD3LRhUJXjUOdH4ZiHCXaoF3zVPxpeGKEQY8iBrDeDyB3wHmj qY9WCX6cmogGQRgYG6yJqDalLqrDOdmJARUDBRA24S0Ed7LmAD0l09kBAW04B/4p WH3f1vQn3i6/+SmDjGzUu2GWGq6Fsdwo2hVM2ym6CILeow/K9JfhdwGvY8LRxWRL hn09j2IJ9P7H1Yz3qDf10AX6V7YILHtchKT1dcngCkTLmDgC4rs1iAAl3f089sRG BafGPGKv2DQjHfR1LfRtbf0P7c09Tkej1MP8HtQMW9hPkBYeXcwbCjdrVGFOzqx+ AvvJDdT6a+oyRMTFlvmZ83UV5pgoyimgjhWnM1V4bFBYjPrtWMkdXJSUXbR6Q7Pi RZWCzGRzwbaxqpl3rK/YTCphOLwEMB27B4/fcqtBzgoMOiaZA0M5fFoo54KgRIh0 zinsSx2OrWgvSiLEXXYKiEYEEBECAAYFAjseYcMACgkQnkDjEAAKq6ROVACgjhDM /3KM+iFjs5QXsnd4oFPOnbkAnjYGa1J3em+bmV2aiCdYXdOuGn4ZiQCVAwUQN7c7 whaQN/7O/JIVAQEB+QP/cYblSAmPXxSFiaHWB+MiUNw8B6ozBLK0QcMQ2YcL6+Vl D+nSZP20+Ja2nfiKjnibCv5ss83yXoHkYk2Rsa8foz6Y7tHwuPiccvqnIC/c9Cvz dbIsdxpfsi0qWPfvX/jLMpXqqnPjdIZErgxpwujas1n9016PuXA8K3MJwVjCqSKI RgQQEQIABgUCOhpCpAAKCRDHUqoysN/3gCt7AJ9adNQMbmA1iSYcbhtgvx9ByLPI DgCfZ5Wj+f7cnYpFZI6GkAyyczG09sE= =LRKC - -----END PGP PUBLIC KEY BLOCK----- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iQEVAwUBP/m68Xey5gA9JdPZAQGZRAf/fLimM8z4Cw2pAJM1hev5vLJeEoLeztzm PmSjf1n4XqybiMeJf2u+40i4GwDkYdHk5kcL7Hr/1bt1t2IKD6XCY7rYGeXLcXRv E2+AAwvdYO+U7qvSGkyxDU+ukNAESR1FV9kVftaPm7PcML99cWHrIJnboKtVhMD6 CNV3TeGpoRTzjZMpL4E34wPj28LpVzqbH7dX2wDPRVzggkWrV2+hnE3UA4q9tO5D yvtBLzhQXR9dChb9oLKKZdABpDdeWThdftsgHgPz5Q+Ct5fPUheUqos0Xplgx6te LU/RZcLX9YDLe8HdJ1FiHvHHMFRQsatwTXcvHUSNbUC6b6PwD2nTaA== =xrmT -----END PGP SIGNATURE-----

4 3

Re: [suse-security] nmap on SuSE 9.0
by dreadnought 05 Jan '04

05 Jan '04

Hello, > Yet again that topic is adressed here. in a good way, though: > > i have prepared a rpm package of nmap with the modification suggested in a > post on the nmap developer list. feel free to grab it from > ftp://ftp.eregion.de/pub/ and try it out. Source RPM is there as well, for > the courious. Is it possible to install this RPM on a system running the Suse 9.0 Live-Eval? I gave it a shot with YaST2, thinking it would be a good way to test, and received the following: "nmap.rpm failed rpm output: error:cannot open Packages index using db3 - Read-only file system (30) error:cannot open Packages database om /var/lib/rpm" I'm not very familiar with the Live-Eval, but thought there would be a way to "install" this updated RPM for the current session? Thanks for the RPM! Once I get home on my system running a full installation of SuSE 9.0 I'll give it a try. Mark

2 1

unsubscription
by mhenke＠inf.ufrgs.br 05 Jan '04

05 Jan '04

---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

1 0

new kernel vulnerability
by Sven 'Darkman' Michels 05 Jan '04

05 Jan '04

Hi there, maybe most of you already know about the new kernel vulnerability in the mremap(2) system call. Can we get a timeline from SuSE when new patches for that will be out? RedHat pushed some fixes today (no, i'm not saying redhat is better.. just don't want to wait as long as for the last fixes, like most others i think). More infos about the vulnerability: http://isec.pl/vulnerabilities/isec-0013-mremap.txt Regards, Sven

2 1

WG: [suse-security] Connection to a wireless accesspoint
by Christian Lange 05 Jan '04

05 Jan '04

Hi, i`m running the netgear wg311 without any problems under SuSE 8.2 with the drivers from: http://sourceforge.net/projects/madwifi/ The included readme describes the installation very good. Then i´m runnning a little script in the boot.local to set up the card with iwconfig. as example: iwconfig essid "myessid" iwconfig freq 2.475G iwconfig key 12345678901234567890ABCD iwconfig nick "mynickname" Use iwlist ath0 scan to scan the exact settings of the ap. Regards, Christian > -----Ursprüngliche Nachricht----- > Von: Ruprecht Helms [mailto:rhelms@mayn.de] > Gesendet: Samstag, 20. Dezember 2003 15:04 > An: suse-security(a)suse.com > Betreff: [suse-security] Connection to a wireless accesspoint > > > Hi, > > I have a netgear wg311 wireless card and want to connect to a > wireless firewall ruter. How do I make it under Suse 9.0. Suse tells > me that it founds a networkadapter and configurate it as a wireless card. > But by typing in the ssid and the wep-key (128 bit encryption) I get no > connection to the accesspoint. On which position I've to enter the > radiochannel? > > Regards, > Ruprecht > > > -- > Check the headers for your unsubscription address > For additional commands, e-mail: suse-security-help(a)suse.com > Security-related bug reports go to security(a)suse.de, not here >

1 0