December 2019 - openSUSE Security Announce

[security-announce] openSUSE-SU-2019:2710-1: moderate: Security update for spectre-meltdown-checker
by opensuse-security＠opensuse.org 31 Dec '19

31 Dec '19

openSUSE Security Update: Security update for spectre-meltdown-checker ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2710-1 Rating: moderate References: #1117665 #1139073 Cross-References: CVE-2018-12207 CVE-2019-11135 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for spectre-meltdown-checker fixes the following issues: - feat: implement TAA detection (CVE-2019-11135 bsc#1139073) - feat: implement MCEPSC / iTLB Multihit detection (CVE-2018-12207 bsc#1117665) - feat: taa: add TSX_CTRL MSR detection in hardware info - feat: fwdb: use both Intel GitHub repo and MCEdb to build our firmware version database - feat: use --live with --kernel/--config/--map to override file detection in live mode - enh: rework the vuln logic of MDS with --paranoid (fixes #307) - enh: explain that Enhanced IBRS is better for performance than classic IBRS - enh: kernel: autodetect customized arch kernels from cmdline - enh: kernel decompression: better tolerance against missing tools - enh: mock: implement reading from /proc/cmdline - fix: variant3a: Silvermont CPUs are not vulnerable to variant 3a - fix: lockdown: detect Red Hat locked down kernels (impacts MSR writes) - fix: lockdown: detect locked down mode in vanilla 5.4+ kernels - fix: sgx: on locked down kernels, fallback to CPUID bit for detection - fix: fwdb: builtin version takes precedence if the local cached version is older - fix: pteinv: don't check kernel image if not available - fix: silence useless error from grep (fixes #322) - fix: msr: fix msr module detection under Ubuntu 19.10 (fixes #316) - fix: mocking value for read_msr - chore: rename mcedb cmdline parameters to fwdb, and change db version scheme - chore: fwdb: update to v130.20191104+i20191027 - chore: add GitHub check workflow This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2710=1 Package List: - openSUSE Leap 15.1 (x86_64): spectre-meltdown-checker-0.43-lp151.3.3.1 References: https://www.suse.com/security/cve/CVE-2018-12207.html https://www.suse.com/security/cve/CVE-2019-11135.html https://bugzilla.suse.com/1117665 https://bugzilla.suse.com/1139073 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2712-1: important: Security update for chromium
by opensuse-security＠opensuse.org 31 Dec '19

31 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2712-1 Rating: important References: #1159498 Cross-References: CVE-2019-13767 Affected Products: openSUSE Leap 15.1 openSUSE Backports SLE-15-SP1 SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for chromium fixes the following issues: Chromium was updated to 79.0.3945.88: - CVE-2019-13767: Fixed a use after free in media picker (boo#1159498) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2712=1 - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2019-2712=1 - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2019-2712=1 Package List: - openSUSE Leap 15.1 (x86_64): chromedriver-79.0.3945.88-lp151.2.54.1 chromedriver-debuginfo-79.0.3945.88-lp151.2.54.1 chromium-79.0.3945.88-lp151.2.54.1 chromium-debuginfo-79.0.3945.88-lp151.2.54.1 chromium-debugsource-79.0.3945.88-lp151.2.54.1 - openSUSE Backports SLE-15-SP1 (aarch64 x86_64): chromedriver-79.0.3945.88-bp151.3.38.1 chromedriver-debuginfo-79.0.3945.88-bp151.3.38.1 chromium-79.0.3945.88-bp151.3.38.1 chromium-debuginfo-79.0.3945.88-bp151.3.38.1 chromium-debugsource-79.0.3945.88-bp151.3.38.1 - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 x86_64): chromedriver-79.0.3945.88-22.1 chromium-79.0.3945.88-22.1 References: https://www.suse.com/security/cve/CVE-2019-13767.html https://bugzilla.suse.com/1159498 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2709-1: moderate: Security update for LibreOffice
by opensuse-security＠opensuse.org 31 Dec '19

31 Dec '19

openSUSE Security Update: Security update for LibreOffice ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2709-1 Rating: moderate References: #1061210 #1105173 #1144522 #1152684 Cross-References: CVE-2019-9853 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves one vulnerability and has three fixes is now available. Description: This update libreoffice and libraries fixes the following issues: LibreOffice was updated to 6.3.3 (jsc#SLE-8705), bringing many bug and stability fixes. More information for the 6.3 release at: https://wiki.documentfoundation.org/ReleaseNotes/6.3 Security issue fixed: - CVE-2019-9853: Fixed an issue where by executing macros, the security settings could have been bypassed (bsc#1152684). Other issues addressed: - Dropped disable-kde4 switch, since it is no longer known by configure - Disabled gtk2 because it will be removed in future releases - librelogo is now a standalone sub-package (bsc#1144522). - Partial fixes for an issue where Table(s) from DOCX showed wrong position or color (bsc#1061210). cmis-client was updated to 0.5.2: * Removed header for Uuid's sha1 header(bsc#1105173). * Fixed Google Drive login * Added support for Google Drive two-factor authentication * Fixed access to SharePoint root folder * Limited the maximal number of redirections to 20 * Switched library implementation to C++11 (the API remains C++98-compatible) * Fixed encoding of OAuth2 credentials * Dropped cppcheck run from "make check". A new "make cppcheck" target was created for it * Added proper API symbol exporting * Speeded up building of tests a bit * Fixed a few issues found by coverity and cppcheck libixion was updated to 0.15.0: * Updated for new liborcus * Switched to spdlog for compile-time debug log outputs * Fixed various issues libmwaw was updated 0.3.15: * Fixed fuzzing issues liborcus was updated to 0.15.3: * Fixed various xml related bugs * Improved performance * Fixed multiple parser issues * Added map and structure mode to orcus-json * Other improvements and fixes mdds was updated to 1.5.0: * API changed to 1.5 * Moved the API incompatibility notes from README to the rst doc. * Added the overview section for flat_segment_tree. myspell-dictionaries was updated to 20191016: * Updated Slovenian thesaurus * Updated the da_DK dictionary * Removed the abbreviations from Thai hunspell dictionary * Updated the English dictionaries * Fixed the logo management for "ca" spdlog was updated to 0.16.3: * Fixed sleep issue under MSVC that happens when changing the clock backwards * Ensured that macros always expand to expressions * Added global flush_on function This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2709=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): myspell-dictionaries-20191016-lp151.2.6.1 myspell-lightproof-en-20191016-lp151.2.6.1 myspell-lightproof-hu_HU-20191016-lp151.2.6.1 myspell-lightproof-pt_BR-20191016-lp151.2.6.1 myspell-lightproof-ru_RU-20191016-lp151.2.6.1 - openSUSE Leap 15.1 (noarch): libmwaw-devel-doc-0.3.15-lp151.2.3.1 libreoffice-branding-upstream-6.3.3.2-lp151.3.9.1 libreoffice-gdb-pretty-printers-6.3.3.2-lp151.3.9.1 libreoffice-glade-6.3.3.2-lp151.3.9.1 libreoffice-icon-themes-6.3.3.2-lp151.3.9.1 libreoffice-l10n-af-6.3.3.2-lp151.3.9.1 libreoffice-l10n-am-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ar-6.3.3.2-lp151.3.9.1 libreoffice-l10n-as-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ast-6.3.3.2-lp151.3.9.1 libreoffice-l10n-be-6.3.3.2-lp151.3.9.1 libreoffice-l10n-bg-6.3.3.2-lp151.3.9.1 libreoffice-l10n-bn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-bn_IN-6.3.3.2-lp151.3.9.1 libreoffice-l10n-bo-6.3.3.2-lp151.3.9.1 libreoffice-l10n-br-6.3.3.2-lp151.3.9.1 libreoffice-l10n-brx-6.3.3.2-lp151.3.9.1 libreoffice-l10n-bs-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ca-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ca_valencia-6.3.3.2-lp151.3.9.1 libreoffice-l10n-cs-6.3.3.2-lp151.3.9.1 libreoffice-l10n-cy-6.3.3.2-lp151.3.9.1 libreoffice-l10n-da-6.3.3.2-lp151.3.9.1 libreoffice-l10n-de-6.3.3.2-lp151.3.9.1 libreoffice-l10n-dgo-6.3.3.2-lp151.3.9.1 libreoffice-l10n-dsb-6.3.3.2-lp151.3.9.1 libreoffice-l10n-dz-6.3.3.2-lp151.3.9.1 libreoffice-l10n-el-6.3.3.2-lp151.3.9.1 libreoffice-l10n-en-6.3.3.2-lp151.3.9.1 libreoffice-l10n-en_GB-6.3.3.2-lp151.3.9.1 libreoffice-l10n-en_ZA-6.3.3.2-lp151.3.9.1 libreoffice-l10n-eo-6.3.3.2-lp151.3.9.1 libreoffice-l10n-es-6.3.3.2-lp151.3.9.1 libreoffice-l10n-et-6.3.3.2-lp151.3.9.1 libreoffice-l10n-eu-6.3.3.2-lp151.3.9.1 libreoffice-l10n-fa-6.3.3.2-lp151.3.9.1 libreoffice-l10n-fi-6.3.3.2-lp151.3.9.1 libreoffice-l10n-fr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-fy-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ga-6.3.3.2-lp151.3.9.1 libreoffice-l10n-gd-6.3.3.2-lp151.3.9.1 libreoffice-l10n-gl-6.3.3.2-lp151.3.9.1 libreoffice-l10n-gu-6.3.3.2-lp151.3.9.1 libreoffice-l10n-gug-6.3.3.2-lp151.3.9.1 libreoffice-l10n-he-6.3.3.2-lp151.3.9.1 libreoffice-l10n-hi-6.3.3.2-lp151.3.9.1 libreoffice-l10n-hr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-hsb-6.3.3.2-lp151.3.9.1 libreoffice-l10n-hu-6.3.3.2-lp151.3.9.1 libreoffice-l10n-id-6.3.3.2-lp151.3.9.1 libreoffice-l10n-is-6.3.3.2-lp151.3.9.1 libreoffice-l10n-it-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ja-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ka-6.3.3.2-lp151.3.9.1 libreoffice-l10n-kab-6.3.3.2-lp151.3.9.1 libreoffice-l10n-kk-6.3.3.2-lp151.3.9.1 libreoffice-l10n-km-6.3.3.2-lp151.3.9.1 libreoffice-l10n-kmr_Latn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-kn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ko-6.3.3.2-lp151.3.9.1 libreoffice-l10n-kok-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ks-6.3.3.2-lp151.3.9.1 libreoffice-l10n-lb-6.3.3.2-lp151.3.9.1 libreoffice-l10n-lo-6.3.3.2-lp151.3.9.1 libreoffice-l10n-lt-6.3.3.2-lp151.3.9.1 libreoffice-l10n-lv-6.3.3.2-lp151.3.9.1 libreoffice-l10n-mai-6.3.3.2-lp151.3.9.1 libreoffice-l10n-mk-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ml-6.3.3.2-lp151.3.9.1 libreoffice-l10n-mn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-mni-6.3.3.2-lp151.3.9.1 libreoffice-l10n-mr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-my-6.3.3.2-lp151.3.9.1 libreoffice-l10n-nb-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ne-6.3.3.2-lp151.3.9.1 libreoffice-l10n-nl-6.3.3.2-lp151.3.9.1 libreoffice-l10n-nn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-nr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-nso-6.3.3.2-lp151.3.9.1 libreoffice-l10n-oc-6.3.3.2-lp151.3.9.1 libreoffice-l10n-om-6.3.3.2-lp151.3.9.1 libreoffice-l10n-or-6.3.3.2-lp151.3.9.1 libreoffice-l10n-pa-6.3.3.2-lp151.3.9.1 libreoffice-l10n-pl-6.3.3.2-lp151.3.9.1 libreoffice-l10n-pt_BR-6.3.3.2-lp151.3.9.1 libreoffice-l10n-pt_PT-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ro-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ru-6.3.3.2-lp151.3.9.1 libreoffice-l10n-rw-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sa_IN-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sat-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sd-6.3.3.2-lp151.3.9.1 libreoffice-l10n-si-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sid-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sk-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sl-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sq-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ss-6.3.3.2-lp151.3.9.1 libreoffice-l10n-st-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sv-6.3.3.2-lp151.3.9.1 libreoffice-l10n-sw_TZ-6.3.3.2-lp151.3.9.1 libreoffice-l10n-szl-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ta-6.3.3.2-lp151.3.9.1 libreoffice-l10n-te-6.3.3.2-lp151.3.9.1 libreoffice-l10n-tg-6.3.3.2-lp151.3.9.1 libreoffice-l10n-th-6.3.3.2-lp151.3.9.1 libreoffice-l10n-tn-6.3.3.2-lp151.3.9.1 libreoffice-l10n-tr-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ts-6.3.3.2-lp151.3.9.1 libreoffice-l10n-tt-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ug-6.3.3.2-lp151.3.9.1 libreoffice-l10n-uk-6.3.3.2-lp151.3.9.1 libreoffice-l10n-uz-6.3.3.2-lp151.3.9.1 libreoffice-l10n-ve-6.3.3.2-lp151.3.9.1 libreoffice-l10n-vec-6.3.3.2-lp151.3.9.1 libreoffice-l10n-vi-6.3.3.2-lp151.3.9.1 libreoffice-l10n-xh-6.3.3.2-lp151.3.9.1 libreoffice-l10n-zh_CN-6.3.3.2-lp151.3.9.1 libreoffice-l10n-zh_TW-6.3.3.2-lp151.3.9.1 libreoffice-l10n-zu-6.3.3.2-lp151.3.9.1 mdds-1_5-devel-1.5.0-lp151.2.1 myspell-af_NA-20191016-lp151.2.6.1 myspell-af_ZA-20191016-lp151.2.6.1 myspell-an-20191016-lp151.2.6.1 myspell-an_ES-20191016-lp151.2.6.1 myspell-ar-20191016-lp151.2.6.1 myspell-ar_AE-20191016-lp151.2.6.1 myspell-ar_BH-20191016-lp151.2.6.1 myspell-ar_DZ-20191016-lp151.2.6.1 myspell-ar_EG-20191016-lp151.2.6.1 myspell-ar_IQ-20191016-lp151.2.6.1 myspell-ar_JO-20191016-lp151.2.6.1 myspell-ar_KW-20191016-lp151.2.6.1 myspell-ar_LB-20191016-lp151.2.6.1 myspell-ar_LY-20191016-lp151.2.6.1 myspell-ar_MA-20191016-lp151.2.6.1 myspell-ar_OM-20191016-lp151.2.6.1 myspell-ar_QA-20191016-lp151.2.6.1 myspell-ar_SA-20191016-lp151.2.6.1 myspell-ar_SD-20191016-lp151.2.6.1 myspell-ar_SY-20191016-lp151.2.6.1 myspell-ar_TN-20191016-lp151.2.6.1 myspell-ar_YE-20191016-lp151.2.6.1 myspell-be_BY-20191016-lp151.2.6.1 myspell-bg_BG-20191016-lp151.2.6.1 myspell-bn_BD-20191016-lp151.2.6.1 myspell-bn_IN-20191016-lp151.2.6.1 myspell-bo-20191016-lp151.2.6.1 myspell-bo_CN-20191016-lp151.2.6.1 myspell-bo_IN-20191016-lp151.2.6.1 myspell-br_FR-20191016-lp151.2.6.1 myspell-bs-20191016-lp151.2.6.1 myspell-bs_BA-20191016-lp151.2.6.1 myspell-ca-20191016-lp151.2.6.1 myspell-ca_AD-20191016-lp151.2.6.1 myspell-ca_ES-20191016-lp151.2.6.1 myspell-ca_ES_valencia-20191016-lp151.2.6.1 myspell-ca_FR-20191016-lp151.2.6.1 myspell-ca_IT-20191016-lp151.2.6.1 myspell-cs_CZ-20191016-lp151.2.6.1 myspell-da_DK-20191016-lp151.2.6.1 myspell-de-20191016-lp151.2.6.1 myspell-de_AT-20191016-lp151.2.6.1 myspell-de_CH-20191016-lp151.2.6.1 myspell-de_DE-20191016-lp151.2.6.1 myspell-el_GR-20191016-lp151.2.6.1 myspell-en-20191016-lp151.2.6.1 myspell-en_AU-20191016-lp151.2.6.1 myspell-en_BS-20191016-lp151.2.6.1 myspell-en_BZ-20191016-lp151.2.6.1 myspell-en_CA-20191016-lp151.2.6.1 myspell-en_GB-20191016-lp151.2.6.1 myspell-en_GH-20191016-lp151.2.6.1 myspell-en_IE-20191016-lp151.2.6.1 myspell-en_IN-20191016-lp151.2.6.1 myspell-en_JM-20191016-lp151.2.6.1 myspell-en_MW-20191016-lp151.2.6.1 myspell-en_NA-20191016-lp151.2.6.1 myspell-en_NZ-20191016-lp151.2.6.1 myspell-en_PH-20191016-lp151.2.6.1 myspell-en_TT-20191016-lp151.2.6.1 myspell-en_US-20191016-lp151.2.6.1 myspell-en_ZA-20191016-lp151.2.6.1 myspell-en_ZW-20191016-lp151.2.6.1 myspell-es-20191016-lp151.2.6.1 myspell-es_AR-20191016-lp151.2.6.1 myspell-es_BO-20191016-lp151.2.6.1 myspell-es_CL-20191016-lp151.2.6.1 myspell-es_CO-20191016-lp151.2.6.1 myspell-es_CR-20191016-lp151.2.6.1 myspell-es_CU-20191016-lp151.2.6.1 myspell-es_DO-20191016-lp151.2.6.1 myspell-es_EC-20191016-lp151.2.6.1 myspell-es_ES-20191016-lp151.2.6.1 myspell-es_GT-20191016-lp151.2.6.1 myspell-es_HN-20191016-lp151.2.6.1 myspell-es_MX-20191016-lp151.2.6.1 myspell-es_NI-20191016-lp151.2.6.1 myspell-es_PA-20191016-lp151.2.6.1 myspell-es_PE-20191016-lp151.2.6.1 myspell-es_PR-20191016-lp151.2.6.1 myspell-es_PY-20191016-lp151.2.6.1 myspell-es_SV-20191016-lp151.2.6.1 myspell-es_UY-20191016-lp151.2.6.1 myspell-es_VE-20191016-lp151.2.6.1 myspell-et_EE-20191016-lp151.2.6.1 myspell-fr_BE-20191016-lp151.2.6.1 myspell-fr_CA-20191016-lp151.2.6.1 myspell-fr_CH-20191016-lp151.2.6.1 myspell-fr_FR-20191016-lp151.2.6.1 myspell-fr_LU-20191016-lp151.2.6.1 myspell-fr_MC-20191016-lp151.2.6.1 myspell-gd_GB-20191016-lp151.2.6.1 myspell-gl-20191016-lp151.2.6.1 myspell-gl_ES-20191016-lp151.2.6.1 myspell-gu_IN-20191016-lp151.2.6.1 myspell-gug-20191016-lp151.2.6.1 myspell-gug_PY-20191016-lp151.2.6.1 myspell-he_IL-20191016-lp151.2.6.1 myspell-hi_IN-20191016-lp151.2.6.1 myspell-hr_HR-20191016-lp151.2.6.1 myspell-hu_HU-20191016-lp151.2.6.1 myspell-id-20191016-lp151.2.6.1 myspell-id_ID-20191016-lp151.2.6.1 myspell-is-20191016-lp151.2.6.1 myspell-is_IS-20191016-lp151.2.6.1 myspell-it_IT-20191016-lp151.2.6.1 myspell-kmr_Latn-20191016-lp151.2.6.1 myspell-kmr_Latn_SY-20191016-lp151.2.6.1 myspell-kmr_Latn_TR-20191016-lp151.2.6.1 myspell-lo_LA-20191016-lp151.2.6.1 myspell-lt_LT-20191016-lp151.2.6.1 myspell-lv_LV-20191016-lp151.2.6.1 myspell-nb_NO-20191016-lp151.2.6.1 myspell-ne_NP-20191016-lp151.2.6.1 myspell-nl_BE-20191016-lp151.2.6.1 myspell-nl_NL-20191016-lp151.2.6.1 myspell-nn_NO-20191016-lp151.2.6.1 myspell-no-20191016-lp151.2.6.1 myspell-oc_FR-20191016-lp151.2.6.1 myspell-pl_PL-20191016-lp151.2.6.1 myspell-pt_AO-20191016-lp151.2.6.1 myspell-pt_BR-20191016-lp151.2.6.1 myspell-pt_PT-20191016-lp151.2.6.1 myspell-ro-20191016-lp151.2.6.1 myspell-ro_RO-20191016-lp151.2.6.1 myspell-ru_RU-20191016-lp151.2.6.1 myspell-si_LK-20191016-lp151.2.6.1 myspell-sk_SK-20191016-lp151.2.6.1 myspell-sl_SI-20191016-lp151.2.6.1 myspell-sq_AL-20191016-lp151.2.6.1 myspell-sr-20191016-lp151.2.6.1 myspell-sr_CS-20191016-lp151.2.6.1 myspell-sr_Latn_CS-20191016-lp151.2.6.1 myspell-sr_Latn_RS-20191016-lp151.2.6.1 myspell-sr_RS-20191016-lp151.2.6.1 myspell-sv_FI-20191016-lp151.2.6.1 myspell-sv_SE-20191016-lp151.2.6.1 myspell-sw_TZ-20191016-lp151.2.6.1 myspell-te-20191016-lp151.2.6.1 myspell-te_IN-20191016-lp151.2.6.1 myspell-th_TH-20191016-lp151.2.6.1 myspell-tr-20191016-lp151.2.6.1 myspell-tr_TR-20191016-lp151.2.6.1 myspell-uk_UA-20191016-lp151.2.6.1 myspell-vi-20191016-lp151.2.6.1 myspell-vi_VN-20191016-lp151.2.6.1 myspell-zu_ZA-20191016-lp151.2.6.1 - openSUSE Leap 15.1 (x86_64): cmis-client-0.5.2-lp151.3.3.1 cmis-client-debuginfo-0.5.2-lp151.3.3.1 cmis-client-debugsource-0.5.2-lp151.3.3.1 libcmis-0_5-5-0.5.2-lp151.3.3.1 libcmis-0_5-5-debuginfo-0.5.2-lp151.3.3.1 libcmis-c-0_5-5-0.5.2-lp151.3.3.1 libcmis-c-0_5-5-debuginfo-0.5.2-lp151.3.3.1 libcmis-c-devel-0.5.2-lp151.3.3.1 libcmis-devel-0.5.2-lp151.3.3.1 libixion-0_15-0-0.15.0-lp151.4.6.1 libixion-0_15-0-debuginfo-0.15.0-lp151.4.6.1 libixion-debuginfo-0.15.0-lp151.4.6.1 libixion-debugsource-0.15.0-lp151.4.6.1 libixion-devel-0.15.0-lp151.4.6.1 libixion-tools-0.15.0-lp151.4.6.1 libixion-tools-debuginfo-0.15.0-lp151.4.6.1 libmwaw-0_3-3-0.3.15-lp151.2.3.1 libmwaw-0_3-3-debuginfo-0.3.15-lp151.2.3.1 libmwaw-debuginfo-0.3.15-lp151.2.3.1 libmwaw-debugsource-0.3.15-lp151.2.3.1 libmwaw-devel-0.3.15-lp151.2.3.1 libmwaw-tools-0.3.15-lp151.2.3.1 libmwaw-tools-debuginfo-0.3.15-lp151.2.3.1 liborcus-0_15-0-0.15.3-lp151.3.6.1 liborcus-0_15-0-debuginfo-0.15.3-lp151.3.6.1 liborcus-debuginfo-0.15.3-lp151.3.6.1 liborcus-debugsource-0.15.3-lp151.3.6.1 liborcus-devel-0.15.3-lp151.3.6.1 liborcus-tools-0.15.3-lp151.3.6.1 liborcus-tools-debuginfo-0.15.3-lp151.3.6.1 libreoffice-6.3.3.2-lp151.3.9.1 libreoffice-base-6.3.3.2-lp151.3.9.1 libreoffice-base-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-base-drivers-firebird-6.3.3.2-lp151.3.9.1 libreoffice-base-drivers-firebird-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-base-drivers-postgresql-6.3.3.2-lp151.3.9.1 libreoffice-base-drivers-postgresql-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-calc-6.3.3.2-lp151.3.9.1 libreoffice-calc-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-calc-extensions-6.3.3.2-lp151.3.9.1 libreoffice-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-debugsource-6.3.3.2-lp151.3.9.1 libreoffice-draw-6.3.3.2-lp151.3.9.1 libreoffice-draw-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-filters-optional-6.3.3.2-lp151.3.9.1 libreoffice-gnome-6.3.3.2-lp151.3.9.1 libreoffice-gnome-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-gtk3-6.3.3.2-lp151.3.9.1 libreoffice-gtk3-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-impress-6.3.3.2-lp151.3.9.1 libreoffice-impress-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-librelogo-6.3.3.2-lp151.3.9.1 libreoffice-mailmerge-6.3.3.2-lp151.3.9.1 libreoffice-math-6.3.3.2-lp151.3.9.1 libreoffice-math-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-officebean-6.3.3.2-lp151.3.9.1 libreoffice-officebean-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-pyuno-6.3.3.2-lp151.3.9.1 libreoffice-pyuno-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-qt5-6.3.3.2-lp151.3.9.1 libreoffice-qt5-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-sdk-6.3.3.2-lp151.3.9.1 libreoffice-sdk-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-sdk-doc-6.3.3.2-lp151.3.9.1 libreoffice-writer-6.3.3.2-lp151.3.9.1 libreoffice-writer-debuginfo-6.3.3.2-lp151.3.9.1 libreoffice-writer-extensions-6.3.3.2-lp151.3.9.1 libreofficekit-6.3.3.2-lp151.3.9.1 libreofficekit-devel-6.3.3.2-lp151.3.9.1 python3-libixion-0.15.0-lp151.4.6.1 python3-libixion-debuginfo-0.15.0-lp151.4.6.1 python3-liborcus-0.15.3-lp151.3.6.1 python3-liborcus-debuginfo-0.15.3-lp151.3.6.1 spdlog-devel-0.16.3-lp151.3.3.1 References: https://www.suse.com/security/cve/CVE-2019-9853.html https://bugzilla.suse.com/1061210 https://bugzilla.suse.com/1105173 https://bugzilla.suse.com/1144522 https://bugzilla.suse.com/1152684 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2712-1: important: Security update for chromium
by opensuse-security＠opensuse.org 31 Dec '19

31 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2712-1 Rating: important References: #1159498 Cross-References: CVE-2019-13767 Affected Products: openSUSE Leap 15.1 openSUSE Backports SLE-15-SP1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for chromium fixes the following issues: Chromium was updated to 79.0.3945.88: - CVE-2019-13767: Fixed a use after free in media picker (boo#1159498) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2712=1 - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2019-2712=1 Package List: - openSUSE Leap 15.1 (x86_64): chromedriver-79.0.3945.88-lp151.2.54.1 chromedriver-debuginfo-79.0.3945.88-lp151.2.54.1 chromium-79.0.3945.88-lp151.2.54.1 chromium-debuginfo-79.0.3945.88-lp151.2.54.1 chromium-debugsource-79.0.3945.88-lp151.2.54.1 - openSUSE Backports SLE-15-SP1 (aarch64 x86_64): chromedriver-79.0.3945.88-bp151.3.38.1 chromedriver-debuginfo-79.0.3945.88-bp151.3.38.1 chromium-79.0.3945.88-bp151.3.38.1 chromium-debuginfo-79.0.3945.88-bp151.3.38.1 chromium-debugsource-79.0.3945.88-bp151.3.38.1 References: https://www.suse.com/security/cve/CVE-2019-13767.html https://bugzilla.suse.com/1159498 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2700-1: important: Security update for samba
by opensuse-security＠opensuse.org 22 Dec '19

22 Dec '19

openSUSE Security Update: Security update for samba ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2700-1 Rating: important References: #1158108 #1158109 Cross-References: CVE-2019-14861 CVE-2019-14870 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for samba fixes the following issues: - CVE-2019-14861: Fixed a DNSServer RPC server crash, that allowed an authenticated user to crash the DCE/RPC DNS management server by creating records with matching the zone name (bsc#1158108). - CVE-2019-14870: Fixed a DelegationNotAllowed not being enforced (bsc#1158109). This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2700=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): ctdb-4.9.5+git.224.86a8e66adea-lp151.2.12.1 ctdb-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 ctdb-pcp-pmda-4.9.5+git.224.86a8e66adea-lp151.2.12.1 ctdb-pcp-pmda-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 ctdb-tests-4.9.5+git.224.86a8e66adea-lp151.2.12.1 ctdb-tests-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-binding0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-binding0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-samr-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-samr0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-samr0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-krb5pac-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-krb5pac0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-krb5pac0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-nbt-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-nbt0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-nbt0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-standard-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-standard0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-standard0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libnetapi-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libnetapi0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libnetapi0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-credentials-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-credentials0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-credentials0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-errors-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-errors0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-errors0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-hostconfig-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-hostconfig0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-hostconfig0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-passdb-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-passdb0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-passdb0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy-python-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy-python3-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-python3-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-python3-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-util-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-util0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-util0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamdb-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamdb0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamdb0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbclient-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbclient0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbclient0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbconf-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbconf0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbconf0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbldap-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbldap2-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbldap2-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libtevent-util-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libtevent-util0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libtevent-util0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libwbclient-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libwbclient0-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libwbclient0-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ad-dc-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ad-dc-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-client-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-client-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-core-devel-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-debugsource-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-dsdb-modules-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-dsdb-modules-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python3-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python3-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-pidl-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-python-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-python-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-python3-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-python3-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-test-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-test-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-winbind-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-winbind-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 - openSUSE Leap 15.1 (noarch): samba-doc-4.9.5+git.224.86a8e66adea-lp151.2.12.1 - openSUSE Leap 15.1 (x86_64): libdcerpc-binding0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-binding0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-samr0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc-samr0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libdcerpc0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-krb5pac0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-krb5pac0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-nbt0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-nbt0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-standard0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr-standard0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libndr0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libnetapi0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libnetapi0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-credentials0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-credentials0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-errors0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-errors0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-hostconfig0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-hostconfig0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-passdb0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-passdb0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-python3-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-policy0-python3-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-util0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamba-util0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamdb0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsamdb0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbclient0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbclient0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbconf0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbconf0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbldap2-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libsmbldap2-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libtevent-util0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libtevent-util0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libwbclient0-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 libwbclient0-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ad-dc-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ad-dc-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ceph-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-ceph-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-client-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-client-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python3-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-libs-python3-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-winbind-32bit-4.9.5+git.224.86a8e66adea-lp151.2.12.1 samba-winbind-32bit-debuginfo-4.9.5+git.224.86a8e66adea-lp151.2.12.1 References: https://www.suse.com/security/cve/CVE-2019-14861.html https://www.suse.com/security/cve/CVE-2019-14870.html https://bugzilla.suse.com/1158108 https://bugzilla.suse.com/1158109 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2698-1: moderate: Security update for mariadb
by opensuse-security＠opensuse.org 22 Dec '19

22 Dec '19

openSUSE Security Update: Security update for mariadb ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2698-1 Rating: moderate References: #1156669 Cross-References: CVE-2019-2737 CVE-2019-2739 CVE-2019-2740 CVE-2019-2758 CVE-2019-2805 CVE-2019-2938 CVE-2019-2974 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes 7 vulnerabilities is now available. Description: This update for mariadb to version 10.2.29 fixes the following issues: MariaDB was updated to 10.2.29 (bsc#1156669) Security issues fixed: - CVE-2019-2737: Fixed an issue where could lead a remote attacker to cause denial of service - CVE-2019-2938: Fixed an issue where could lead a remote attacker to cause denial of service - CVE-2019-2740: Fixed an issue where could lead a local attacker to cause denial of service - CVE-2019-2805: Fixed an issue where could lead a local attacker to cause denial of service - CVE-2019-2974: Fixed an issue where could lead a remote attacker to cause denial of service - CVE-2019-2758: Fixed an issue where could lead a local attacker to cause denial of service or data corruption - CVE-2019-2739: Fixed an issue where could lead a local attacker to cause denial of service or data corruption This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2698=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libmysqld-devel-10.2.29-lp151.2.9.1 libmysqld19-10.2.29-lp151.2.9.1 libmysqld19-debuginfo-10.2.29-lp151.2.9.1 mariadb-10.2.29-lp151.2.9.1 mariadb-bench-10.2.29-lp151.2.9.1 mariadb-bench-debuginfo-10.2.29-lp151.2.9.1 mariadb-client-10.2.29-lp151.2.9.1 mariadb-client-debuginfo-10.2.29-lp151.2.9.1 mariadb-debuginfo-10.2.29-lp151.2.9.1 mariadb-debugsource-10.2.29-lp151.2.9.1 mariadb-galera-10.2.29-lp151.2.9.1 mariadb-test-10.2.29-lp151.2.9.1 mariadb-test-debuginfo-10.2.29-lp151.2.9.1 mariadb-tools-10.2.29-lp151.2.9.1 mariadb-tools-debuginfo-10.2.29-lp151.2.9.1 - openSUSE Leap 15.1 (noarch): mariadb-errormessages-10.2.29-lp151.2.9.1 References: https://www.suse.com/security/cve/CVE-2019-2737.html https://www.suse.com/security/cve/CVE-2019-2739.html https://www.suse.com/security/cve/CVE-2019-2740.html https://www.suse.com/security/cve/CVE-2019-2758.html https://www.suse.com/security/cve/CVE-2019-2805.html https://www.suse.com/security/cve/CVE-2019-2938.html https://www.suse.com/security/cve/CVE-2019-2974.html https://bugzilla.suse.com/1156669 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2694-1: important: Security update for chromium
by opensuse-security＠opensuse.org 18 Dec '19

18 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2694-1 Rating: important References: #1158982 Cross-References: CVE-2019-13725 CVE-2019-13726 CVE-2019-13727 CVE-2019-13728 CVE-2019-13729 CVE-2019-13730 CVE-2019-13732 CVE-2019-13734 CVE-2019-13735 CVE-2019-13736 CVE-2019-13737 CVE-2019-13738 CVE-2019-13739 CVE-2019-13740 CVE-2019-13741 CVE-2019-13742 CVE-2019-13743 CVE-2019-13744 CVE-2019-13745 CVE-2019-13746 CVE-2019-13747 CVE-2019-13748 CVE-2019-13749 CVE-2019-13750 CVE-2019-13751 CVE-2019-13752 CVE-2019-13753 CVE-2019-13754 CVE-2019-13755 CVE-2019-13756 CVE-2019-13757 CVE-2019-13758 CVE-2019-13759 CVE-2019-13761 CVE-2019-13762 CVE-2019-13763 CVE-2019-13764 Affected Products: openSUSE Backports SLE-15-SP1 ______________________________________________________________________________ An update that fixes 37 vulnerabilities is now available. Description: This update for chromium fixes the following issues: Chromium was updated to 79.0.3945.79 (boo#1158982) - CVE-2019-13725: Fixed a use after free in Bluetooth - CVE-2019-13726: Fixed a heap buffer overflow in password manager - CVE-2019-13727: Fixed an insufficient policy enforcement in WebSockets - CVE-2019-13728: Fixed an out of bounds write in V8 - CVE-2019-13729: Fixed a use after free in WebSockets - CVE-2019-13730: Fixed a type Confusion in V8 - CVE-2019-13732: Fixed a use after free in WebAudio - CVE-2019-13734: Fixed an out of bounds write in SQLite - CVE-2019-13735: Fixed an out of bounds write in V8 - CVE-2019-13764: Fixed a type Confusion in V8 - CVE-2019-13736: Fixed an integer overflow in PDFium - CVE-2019-13737: Fixed an insufficient policy enforcement in autocomplete - CVE-2019-13738: Fixed an insufficient policy enforcement in navigation - CVE-2019-13739: Fixed an incorrect security UI in Omnibox - CVE-2019-13740: Fixed an incorrect security UI in sharing - CVE-2019-13741: Fixed an insufficient validation of untrusted input in Blink - CVE-2019-13742: Fixed an incorrect security UI in Omnibox - CVE-2019-13743: Fixed an incorrect security UI in external protocol handling - CVE-2019-13744: Fixed an insufficient policy enforcement in cookies - CVE-2019-13745: Fixed an insufficient policy enforcement in audio - CVE-2019-13746: Fixed an insufficient policy enforcement in Omnibox - CVE-2019-13747: Fixed an uninitialized Use in rendering - CVE-2019-13748: Fixed an insufficient policy enforcement in developer tools - CVE-2019-13749: Fixed an incorrect security UI in Omnibox - CVE-2019-13750: Fixed an insufficient data validation in SQLite - CVE-2019-13751: Fixed an uninitialized Use in SQLite - CVE-2019-13752: Fixed an out of bounds read in SQLite - CVE-2019-13753: Fixed an out of bounds read in SQLite - CVE-2019-13754: Fixed an insufficient policy enforcement in extensions - CVE-2019-13755: Fixed an insufficient policy enforcement in extensions - CVE-2019-13756: Fixed an incorrect security UI in printing - CVE-2019-13757: Fixed an incorrect security UI in Omnibox - CVE-2019-13758: Fixed an insufficient policy enforcement in navigation - CVE-2019-13759: Fixed an incorrect security UI in interstitials - CVE-2019-13761: Fixed an incorrect security UI in Omnibox - CVE-2019-13762: Fixed an insufficient policy enforcement in downloads - CVE-2019-13763: Fixed an insufficient policy enforcement in payments This update was imported from the openSUSE:Leap:15.1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2019-2694=1 Package List: - openSUSE Backports SLE-15-SP1 (aarch64 x86_64): chromedriver-79.0.3945.79-bp151.3.35.1 chromium-79.0.3945.79-bp151.3.35.1 References: https://www.suse.com/security/cve/CVE-2019-13725.html https://www.suse.com/security/cve/CVE-2019-13726.html https://www.suse.com/security/cve/CVE-2019-13727.html https://www.suse.com/security/cve/CVE-2019-13728.html https://www.suse.com/security/cve/CVE-2019-13729.html https://www.suse.com/security/cve/CVE-2019-13730.html https://www.suse.com/security/cve/CVE-2019-13732.html https://www.suse.com/security/cve/CVE-2019-13734.html https://www.suse.com/security/cve/CVE-2019-13735.html https://www.suse.com/security/cve/CVE-2019-13736.html https://www.suse.com/security/cve/CVE-2019-13737.html https://www.suse.com/security/cve/CVE-2019-13738.html https://www.suse.com/security/cve/CVE-2019-13739.html https://www.suse.com/security/cve/CVE-2019-13740.html https://www.suse.com/security/cve/CVE-2019-13741.html https://www.suse.com/security/cve/CVE-2019-13742.html https://www.suse.com/security/cve/CVE-2019-13743.html https://www.suse.com/security/cve/CVE-2019-13744.html https://www.suse.com/security/cve/CVE-2019-13745.html https://www.suse.com/security/cve/CVE-2019-13746.html https://www.suse.com/security/cve/CVE-2019-13747.html https://www.suse.com/security/cve/CVE-2019-13748.html https://www.suse.com/security/cve/CVE-2019-13749.html https://www.suse.com/security/cve/CVE-2019-13750.html https://www.suse.com/security/cve/CVE-2019-13751.html https://www.suse.com/security/cve/CVE-2019-13752.html https://www.suse.com/security/cve/CVE-2019-13753.html https://www.suse.com/security/cve/CVE-2019-13754.html https://www.suse.com/security/cve/CVE-2019-13755.html https://www.suse.com/security/cve/CVE-2019-13756.html https://www.suse.com/security/cve/CVE-2019-13757.html https://www.suse.com/security/cve/CVE-2019-13758.html https://www.suse.com/security/cve/CVE-2019-13759.html https://www.suse.com/security/cve/CVE-2019-13761.html https://www.suse.com/security/cve/CVE-2019-13762.html https://www.suse.com/security/cve/CVE-2019-13763.html https://www.suse.com/security/cve/CVE-2019-13764.html https://bugzilla.suse.com/1158982 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2693-1: important: Security update for chromium
by opensuse-security＠opensuse.org 18 Dec '19

18 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2693-1 Rating: important References: #1157269 Cross-References: CVE-2019-13723 CVE-2019-13724 Affected Products: openSUSE Backports SLE-15 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for chromium to version 78.0.3904.108 fixes the following issues: - Chromium was updated to 78.0.3904.108 (boo#1157269) Security issues fixed: - CVE-2019-13723: Fixed a use-after-free in Bluetooth - CVE-2019-13724: Fixed an out of bounds access in Bluetooth This update was imported from the openSUSE:Leap:15.0:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2019-2693=1 Package List: - openSUSE Backports SLE-15 (aarch64 x86_64): chromedriver-78.0.3904.108-bp150.255.1 chromium-78.0.3904.108-bp150.255.1 References: https://www.suse.com/security/cve/CVE-2019-13723.html https://www.suse.com/security/cve/CVE-2019-13724.html https://bugzilla.suse.com/1157269 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2692-1: important: Security update for chromium
by opensuse-security＠opensuse.org 16 Dec '19

16 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2692-1 Rating: important References: #1158982 Cross-References: CVE-2019-13725 CVE-2019-13726 CVE-2019-13727 CVE-2019-13728 CVE-2019-13729 CVE-2019-13730 CVE-2019-13732 CVE-2019-13734 CVE-2019-13735 CVE-2019-13736 CVE-2019-13737 CVE-2019-13738 CVE-2019-13739 CVE-2019-13740 CVE-2019-13741 CVE-2019-13742 CVE-2019-13743 CVE-2019-13744 CVE-2019-13745 CVE-2019-13746 CVE-2019-13747 CVE-2019-13748 CVE-2019-13749 CVE-2019-13750 CVE-2019-13751 CVE-2019-13752 CVE-2019-13753 CVE-2019-13754 CVE-2019-13755 CVE-2019-13756 CVE-2019-13757 CVE-2019-13758 CVE-2019-13759 CVE-2019-13761 CVE-2019-13762 CVE-2019-13763 CVE-2019-13764 Affected Products: openSUSE Leap 15.1 openSUSE Backports SLE-15 SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes 37 vulnerabilities is now available. Description: This update for chromium fixes the following issues: Chromium was updated to 79.0.3945.79 (boo#1158982) - CVE-2019-13725: Fixed a use after free in Bluetooth - CVE-2019-13726: Fixed a heap buffer overflow in password manager - CVE-2019-13727: Fixed an insufficient policy enforcement in WebSockets - CVE-2019-13728: Fixed an out of bounds write in V8 - CVE-2019-13729: Fixed a use after free in WebSockets - CVE-2019-13730: Fixed a type Confusion in V8 - CVE-2019-13732: Fixed a use after free in WebAudio - CVE-2019-13734: Fixed an out of bounds write in SQLite - CVE-2019-13735: Fixed an out of bounds write in V8 - CVE-2019-13764: Fixed a type Confusion in V8 - CVE-2019-13736: Fixed an integer overflow in PDFium - CVE-2019-13737: Fixed an insufficient policy enforcement in autocomplete - CVE-2019-13738: Fixed an insufficient policy enforcement in navigation - CVE-2019-13739: Fixed an incorrect security UI in Omnibox - CVE-2019-13740: Fixed an incorrect security UI in sharing - CVE-2019-13741: Fixed an insufficient validation of untrusted input in Blink - CVE-2019-13742: Fixed an incorrect security UI in Omnibox - CVE-2019-13743: Fixed an incorrect security UI in external protocol handling - CVE-2019-13744: Fixed an insufficient policy enforcement in cookies - CVE-2019-13745: Fixed an insufficient policy enforcement in audio - CVE-2019-13746: Fixed an insufficient policy enforcement in Omnibox - CVE-2019-13747: Fixed an uninitialized Use in rendering - CVE-2019-13748: Fixed an insufficient policy enforcement in developer tools - CVE-2019-13749: Fixed an incorrect security UI in Omnibox - CVE-2019-13750: Fixed an insufficient data validation in SQLite - CVE-2019-13751: Fixed an uninitialized Use in SQLite - CVE-2019-13752: Fixed an out of bounds read in SQLite - CVE-2019-13753: Fixed an out of bounds read in SQLite - CVE-2019-13754: Fixed an insufficient policy enforcement in extensions - CVE-2019-13755: Fixed an insufficient policy enforcement in extensions - CVE-2019-13756: Fixed an incorrect security UI in printing - CVE-2019-13757: Fixed an incorrect security UI in Omnibox - CVE-2019-13758: Fixed an insufficient policy enforcement in navigation - CVE-2019-13759: Fixed an incorrect security UI in interstitials - CVE-2019-13761: Fixed an incorrect security UI in Omnibox - CVE-2019-13762: Fixed an insufficient policy enforcement in downloads - CVE-2019-13763: Fixed an insufficient policy enforcement in payments Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2692=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2019-2692=1 - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2019-2692=1 Package List: - openSUSE Leap 15.1 (x86_64): chromedriver-79.0.3945.79-lp151.2.51.1 chromedriver-debuginfo-79.0.3945.79-lp151.2.51.1 chromium-79.0.3945.79-lp151.2.51.1 chromium-debuginfo-79.0.3945.79-lp151.2.51.1 chromium-debugsource-79.0.3945.79-lp151.2.51.1 - openSUSE Backports SLE-15 (aarch64 x86_64): chromedriver-79.0.3945.79-bp150.252.1 chromedriver-debuginfo-79.0.3945.79-bp150.252.1 chromium-79.0.3945.79-bp150.252.1 chromium-debuginfo-79.0.3945.79-bp150.252.1 chromium-debugsource-79.0.3945.79-bp150.252.1 - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 x86_64): chromedriver-79.0.3945.79-19.1 chromedriver-debuginfo-79.0.3945.79-19.1 chromium-79.0.3945.79-19.1 chromium-debuginfo-79.0.3945.79-19.1 chromium-debugsource-79.0.3945.79-19.1 References: https://www.suse.com/security/cve/CVE-2019-13725.html https://www.suse.com/security/cve/CVE-2019-13726.html https://www.suse.com/security/cve/CVE-2019-13727.html https://www.suse.com/security/cve/CVE-2019-13728.html https://www.suse.com/security/cve/CVE-2019-13729.html https://www.suse.com/security/cve/CVE-2019-13730.html https://www.suse.com/security/cve/CVE-2019-13732.html https://www.suse.com/security/cve/CVE-2019-13734.html https://www.suse.com/security/cve/CVE-2019-13735.html https://www.suse.com/security/cve/CVE-2019-13736.html https://www.suse.com/security/cve/CVE-2019-13737.html https://www.suse.com/security/cve/CVE-2019-13738.html https://www.suse.com/security/cve/CVE-2019-13739.html https://www.suse.com/security/cve/CVE-2019-13740.html https://www.suse.com/security/cve/CVE-2019-13741.html https://www.suse.com/security/cve/CVE-2019-13742.html https://www.suse.com/security/cve/CVE-2019-13743.html https://www.suse.com/security/cve/CVE-2019-13744.html https://www.suse.com/security/cve/CVE-2019-13745.html https://www.suse.com/security/cve/CVE-2019-13746.html https://www.suse.com/security/cve/CVE-2019-13747.html https://www.suse.com/security/cve/CVE-2019-13748.html https://www.suse.com/security/cve/CVE-2019-13749.html https://www.suse.com/security/cve/CVE-2019-13750.html https://www.suse.com/security/cve/CVE-2019-13751.html https://www.suse.com/security/cve/CVE-2019-13752.html https://www.suse.com/security/cve/CVE-2019-13753.html https://www.suse.com/security/cve/CVE-2019-13754.html https://www.suse.com/security/cve/CVE-2019-13755.html https://www.suse.com/security/cve/CVE-2019-13756.html https://www.suse.com/security/cve/CVE-2019-13757.html https://www.suse.com/security/cve/CVE-2019-13758.html https://www.suse.com/security/cve/CVE-2019-13759.html https://www.suse.com/security/cve/CVE-2019-13761.html https://www.suse.com/security/cve/CVE-2019-13762.html https://www.suse.com/security/cve/CVE-2019-13763.html https://www.suse.com/security/cve/CVE-2019-13764.html https://bugzilla.suse.com/1158982 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2689-1: important: Security update for libssh
by opensuse-security＠opensuse.org 16 Dec '19

16 Dec '19

openSUSE Security Update: Security update for libssh ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2689-1 Rating: important References: #1158095 Cross-References: CVE-2019-14889 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for libssh fixes the following issues: - CVE-2019-14889: Fixed an arbitrary command execution (bsc#1158095). This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2689=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libssh-debugsource-0.8.7-lp151.2.6.1 libssh-devel-0.8.7-lp151.2.6.1 libssh4-0.8.7-lp151.2.6.1 libssh4-debuginfo-0.8.7-lp151.2.6.1 - openSUSE Leap 15.1 (x86_64): libssh4-32bit-0.8.7-lp151.2.6.1 libssh4-32bit-debuginfo-0.8.7-lp151.2.6.1 References: https://www.suse.com/security/cve/CVE-2019-14889.html https://bugzilla.suse.com/1158095 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2692-1: important: Security update for chromium
by opensuse-security＠opensuse.org 16 Dec '19

16 Dec '19

openSUSE Security Update: Security update for chromium ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2692-1 Rating: important References: #1158982 Cross-References: CVE-2019-13725 CVE-2019-13726 CVE-2019-13727 CVE-2019-13728 CVE-2019-13729 CVE-2019-13730 CVE-2019-13732 CVE-2019-13734 CVE-2019-13735 CVE-2019-13736 CVE-2019-13737 CVE-2019-13738 CVE-2019-13739 CVE-2019-13740 CVE-2019-13741 CVE-2019-13742 CVE-2019-13743 CVE-2019-13744 CVE-2019-13745 CVE-2019-13746 CVE-2019-13747 CVE-2019-13748 CVE-2019-13749 CVE-2019-13750 CVE-2019-13751 CVE-2019-13752 CVE-2019-13753 CVE-2019-13754 CVE-2019-13755 CVE-2019-13756 CVE-2019-13757 CVE-2019-13758 CVE-2019-13759 CVE-2019-13761 CVE-2019-13762 CVE-2019-13763 CVE-2019-13764 Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes 37 vulnerabilities is now available. Description: This update for chromium fixes the following issues: Chromium was updated to 79.0.3945.79 (boo#1158982) - CVE-2019-13725: Fixed a use after free in Bluetooth - CVE-2019-13726: Fixed a heap buffer overflow in password manager - CVE-2019-13727: Fixed an insufficient policy enforcement in WebSockets - CVE-2019-13728: Fixed an out of bounds write in V8 - CVE-2019-13729: Fixed a use after free in WebSockets - CVE-2019-13730: Fixed a type Confusion in V8 - CVE-2019-13732: Fixed a use after free in WebAudio - CVE-2019-13734: Fixed an out of bounds write in SQLite - CVE-2019-13735: Fixed an out of bounds write in V8 - CVE-2019-13764: Fixed a type Confusion in V8 - CVE-2019-13736: Fixed an integer overflow in PDFium - CVE-2019-13737: Fixed an insufficient policy enforcement in autocomplete - CVE-2019-13738: Fixed an insufficient policy enforcement in navigation - CVE-2019-13739: Fixed an incorrect security UI in Omnibox - CVE-2019-13740: Fixed an incorrect security UI in sharing - CVE-2019-13741: Fixed an insufficient validation of untrusted input in Blink - CVE-2019-13742: Fixed an incorrect security UI in Omnibox - CVE-2019-13743: Fixed an incorrect security UI in external protocol handling - CVE-2019-13744: Fixed an insufficient policy enforcement in cookies - CVE-2019-13745: Fixed an insufficient policy enforcement in audio - CVE-2019-13746: Fixed an insufficient policy enforcement in Omnibox - CVE-2019-13747: Fixed an uninitialized Use in rendering - CVE-2019-13748: Fixed an insufficient policy enforcement in developer tools - CVE-2019-13749: Fixed an incorrect security UI in Omnibox - CVE-2019-13750: Fixed an insufficient data validation in SQLite - CVE-2019-13751: Fixed an uninitialized Use in SQLite - CVE-2019-13752: Fixed an out of bounds read in SQLite - CVE-2019-13753: Fixed an out of bounds read in SQLite - CVE-2019-13754: Fixed an insufficient policy enforcement in extensions - CVE-2019-13755: Fixed an insufficient policy enforcement in extensions - CVE-2019-13756: Fixed an incorrect security UI in printing - CVE-2019-13757: Fixed an incorrect security UI in Omnibox - CVE-2019-13758: Fixed an insufficient policy enforcement in navigation - CVE-2019-13759: Fixed an incorrect security UI in interstitials - CVE-2019-13761: Fixed an incorrect security UI in Omnibox - CVE-2019-13762: Fixed an insufficient policy enforcement in downloads - CVE-2019-13763: Fixed an insufficient policy enforcement in payments Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2019-2692=1 Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 x86_64): chromedriver-79.0.3945.79-19.1 chromedriver-debuginfo-79.0.3945.79-19.1 chromium-79.0.3945.79-19.1 chromium-debuginfo-79.0.3945.79-19.1 chromium-debugsource-79.0.3945.79-19.1 References: https://www.suse.com/security/cve/CVE-2019-13725.html https://www.suse.com/security/cve/CVE-2019-13726.html https://www.suse.com/security/cve/CVE-2019-13727.html https://www.suse.com/security/cve/CVE-2019-13728.html https://www.suse.com/security/cve/CVE-2019-13729.html https://www.suse.com/security/cve/CVE-2019-13730.html https://www.suse.com/security/cve/CVE-2019-13732.html https://www.suse.com/security/cve/CVE-2019-13734.html https://www.suse.com/security/cve/CVE-2019-13735.html https://www.suse.com/security/cve/CVE-2019-13736.html https://www.suse.com/security/cve/CVE-2019-13737.html https://www.suse.com/security/cve/CVE-2019-13738.html https://www.suse.com/security/cve/CVE-2019-13739.html https://www.suse.com/security/cve/CVE-2019-13740.html https://www.suse.com/security/cve/CVE-2019-13741.html https://www.suse.com/security/cve/CVE-2019-13742.html https://www.suse.com/security/cve/CVE-2019-13743.html https://www.suse.com/security/cve/CVE-2019-13744.html https://www.suse.com/security/cve/CVE-2019-13745.html https://www.suse.com/security/cve/CVE-2019-13746.html https://www.suse.com/security/cve/CVE-2019-13747.html https://www.suse.com/security/cve/CVE-2019-13748.html https://www.suse.com/security/cve/CVE-2019-13749.html https://www.suse.com/security/cve/CVE-2019-13750.html https://www.suse.com/security/cve/CVE-2019-13751.html https://www.suse.com/security/cve/CVE-2019-13752.html https://www.suse.com/security/cve/CVE-2019-13753.html https://www.suse.com/security/cve/CVE-2019-13754.html https://www.suse.com/security/cve/CVE-2019-13755.html https://www.suse.com/security/cve/CVE-2019-13756.html https://www.suse.com/security/cve/CVE-2019-13757.html https://www.suse.com/security/cve/CVE-2019-13758.html https://www.suse.com/security/cve/CVE-2019-13759.html https://www.suse.com/security/cve/CVE-2019-13761.html https://www.suse.com/security/cve/CVE-2019-13762.html https://www.suse.com/security/cve/CVE-2019-13763.html https://www.suse.com/security/cve/CVE-2019-13764.html https://bugzilla.suse.com/1158982 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2687-1: important: Security update for java-1_8_0-openjdk
by opensuse-security＠opensuse.org 15 Dec '19

15 Dec '19

openSUSE Security Update: Security update for java-1_8_0-openjdk ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2687-1 Rating: important References: #1138529 #1152856 #1154212 Cross-References: CVE-2019-2894 CVE-2019-2933 CVE-2019-2945 CVE-2019-2949 CVE-2019-2958 CVE-2019-2962 CVE-2019-2964 CVE-2019-2973 CVE-2019-2975 CVE-2019-2978 CVE-2019-2981 CVE-2019-2983 CVE-2019-2987 CVE-2019-2988 CVE-2019-2989 CVE-2019-2992 CVE-2019-2999 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes 17 vulnerabilities is now available. Description: This update for java-1_8_0-openjdk (jdk8u232/icedtea 3.14.0) fixes the following issues: Security issues fixed (bsc#1154212): - CVE-2019-2933: Windows file handling redux - CVE-2019-2945: Better socket support - CVE-2019-2949: Better Kerberos ccache handling - CVE-2019-2958: Build Better Processes - CVE-2019-2964: Better support for patterns - CVE-2019-2962: Better Glyph Images - CVE-2019-2973: Better pattern compilation - CVE-2019-2975: Unexpected exception in jjs - CVE-2019-2978: Improved handling of jar files - CVE-2019-2981: Better Path supports - CVE-2019-2983: Better serial attributes - CVE-2019-2987: Better rendering of native glyphs - CVE-2019-2988: Better Graphics2D drawing - CVE-2019-2989: Improve TLS connection support - CVE-2019-2992: Enhance font glyph mapping - CVE-2019-2999: Commentary on Javadoc comments - CVE-2019-2894: Enhance ECDSA operations (bsc#1152856) Bug fixes: - Fixed build failuers on ARM (bsc#1138529). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2687=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): java-1_8_0-openjdk-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-accessibility-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-debuginfo-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-debugsource-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-demo-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-demo-debuginfo-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-devel-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-devel-debuginfo-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-headless-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-headless-debuginfo-1.8.0.232-lp151.2.6.1 java-1_8_0-openjdk-src-1.8.0.232-lp151.2.6.1 - openSUSE Leap 15.1 (noarch): java-1_8_0-openjdk-javadoc-1.8.0.232-lp151.2.6.1 References: https://www.suse.com/security/cve/CVE-2019-2894.html https://www.suse.com/security/cve/CVE-2019-2933.html https://www.suse.com/security/cve/CVE-2019-2945.html https://www.suse.com/security/cve/CVE-2019-2949.html https://www.suse.com/security/cve/CVE-2019-2958.html https://www.suse.com/security/cve/CVE-2019-2962.html https://www.suse.com/security/cve/CVE-2019-2964.html https://www.suse.com/security/cve/CVE-2019-2973.html https://www.suse.com/security/cve/CVE-2019-2975.html https://www.suse.com/security/cve/CVE-2019-2978.html https://www.suse.com/security/cve/CVE-2019-2981.html https://www.suse.com/security/cve/CVE-2019-2983.html https://www.suse.com/security/cve/CVE-2019-2987.html https://www.suse.com/security/cve/CVE-2019-2988.html https://www.suse.com/security/cve/CVE-2019-2989.html https://www.suse.com/security/cve/CVE-2019-2992.html https://www.suse.com/security/cve/CVE-2019-2999.html https://bugzilla.suse.com/1138529 https://bugzilla.suse.com/1152856 https://bugzilla.suse.com/1154212 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2685-1: moderate: Security update for postgresql
by opensuse-security＠opensuse.org 15 Dec '19

15 Dec '19

openSUSE Security Update: Security update for postgresql ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2685-1 Rating: moderate References: #1100397 #1123886 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update for postgresql fixes the following issues: - Changed permissions, so that the directory can only be used by users in the postgres group (bsc#1123886). - Moved bash profile out of /var/lib to allow transactional updates (bsc#1100397). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2685=1 Package List: - openSUSE Leap 15.1 (noarch): postgresql-10-lp151.6.3.1 postgresql-contrib-10-lp151.6.3.1 postgresql-devel-10-lp151.6.3.1 postgresql-docs-10-lp151.6.3.1 postgresql-plperl-10-lp151.6.3.1 postgresql-plpython-10-lp151.6.3.1 postgresql-pltcl-10-lp151.6.3.1 postgresql-server-10-lp151.6.3.1 postgresql-test-10-lp151.6.3.1 References: https://bugzilla.suse.com/1100397 https://bugzilla.suse.com/1123886 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2675-1: important: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 12 Dec '19

12 Dec '19

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2675-1 Rating: important References: #1051510 #1071995 #1078248 #1089644 #1091041 #1103990 #1103991 #1104353 #1104427 #1104745 #1108043 #1109837 #1111666 #1112178 #1112374 #1113722 #1113956 #1113994 #1114279 #1117169 #1118661 #1119113 #1120853 #1126390 #1127354 #1127371 #1129770 #1131107 #1134983 #1137223 #1137236 #1138039 #1140948 #1141054 #1142095 #1142635 #1142924 #1144333 #1146519 #1146544 #1149448 #1151067 #1151548 #1151900 #1153628 #1153811 #1154043 #1154058 #1154355 #1154601 #1155689 #1155897 #1155921 #1156258 #1156466 #1156471 #1156494 #1156609 #1156700 #1156729 #1156882 #1156928 #1157032 #1157038 #1157042 #1157044 #1157045 #1157046 #1157049 #1157070 #1157115 #1157143 #1157145 #1157158 #1157160 #1157162 #1157171 #1157173 #1157178 #1157180 #1157182 #1157183 #1157184 #1157191 #1157193 #1157197 #1157298 #1157304 #1157307 #1157324 #1157333 #1157386 #1157424 #1157463 #1157499 #1157678 #1157698 #1157778 #1157908 #1158049 #1158063 #1158064 #1158065 #1158066 #1158067 #1158068 #1158071 #1158082 #1158381 #1158394 #1158398 #1158407 #1158410 #1158413 #1158417 #1158427 #1158445 #1158637 #1158638 #1158639 #1158640 #1158641 #1158643 #1158644 #1158645 #1158646 #1158647 #1158649 #1158651 #1158652 Cross-References: CVE-2019-14895 CVE-2019-14901 CVE-2019-15213 CVE-2019-15916 CVE-2019-18660 CVE-2019-18683 CVE-2019-18809 CVE-2019-19046 CVE-2019-19049 CVE-2019-19052 CVE-2019-19056 CVE-2019-19057 CVE-2019-19058 CVE-2019-19060 CVE-2019-19062 CVE-2019-19063 CVE-2019-19065 CVE-2019-19067 CVE-2019-19068 CVE-2019-19073 CVE-2019-19074 CVE-2019-19075 CVE-2019-19077 CVE-2019-19078 CVE-2019-19080 CVE-2019-19081 CVE-2019-19082 CVE-2019-19083 CVE-2019-19227 CVE-2019-19524 CVE-2019-19525 CVE-2019-19528 CVE-2019-19529 CVE-2019-19530 CVE-2019-19531 CVE-2019-19534 CVE-2019-19536 CVE-2019-19543 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves 38 vulnerabilities and has 92 fixes is now available. Description: The openSUSE Leap 15.1 kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2019-15211: There was a use-after-free caused by a malicious USB device in drivers/media/v4l2-core/v4l2-dev.c (bnc#1146519). - CVE-2019-15213: There was a use-after-free caused by a malicious USB device in the drivers/media/usb/dvb-usb/dvb-usb-init.c driver (bnc#1146544). - CVE-2019-19531: There was a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/yurex.c driver, aka CID-fc05481b2fca (bnc#1158427 1158445). - CVE-2019-19543: There is a use-after-free in serial_ir_init_module() in drivers/media/rc/serial_ir.c (bnc#1158427). - CVE-2019-19525: There is a use-after-free bug that can be caused by a malicious USB device in the drivers/net/ieee802154/atusb.c driver, aka CID-7fd25e6fc035 (bnc#1158417). - CVE-2019-19530: There is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/class/cdc-acm.c driver, aka CID-c52873e5a1ef (bnc#1158410). - CVE-2019-19536: There is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_pro.c driver, aka CID-ead16e53c2f0 (bnc#1158394). - CVE-2019-19524: There is a use-after-free bug that can be caused by a malicious USB device in the drivers/input/ff-memless.c driver, aka CID-fa3a5a1880c9 (bnc#1158413). - CVE-2019-19528: There is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/iowarrior.c driver, aka CID-edc4746f253d (bnc#1158407). - CVE-2019-19534: There is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_core.c driver, aka CID-f7a1337f0d29 (bnc#1158398). - CVE-2019-19529: There is a use-after-free bug that can be caused by a malicious USB device in the drivers/net/can/usb/mcba_usb.c driver, aka CID-4d6636498c41 (bnc#1158381). - CVE-2019-14901: A heap overflow flaw was found in the Marvell WiFi chip driver. The vulnerability allowed a remote attacker to cause a system crash, resulting in a denial of service, or execute arbitrary code. The highest threat with this vulnerability is with the availability of the system. If code execution occurs, the code will run with the permissions of root. This will affect both confidentiality and integrity of files on the system (bnc#1157042). - CVE-2019-14895: A heap-based buffer overflow was discovered in the Marvell WiFi chip driver. The flaw could occur when the station attempts a connection negotiation during the handling of the remote devices country settings. This could allowed the remote device to cause a denial of service (system crash) or possibly execute arbitrary code (bnc#1157158). - CVE-2019-18660: The Linux kernel on powerpc allowed Information Exposure because the Spectre-RSB mitigation is not in place for all applicable CPUs, aka CID-39e72bf96f58. This is related to arch/powerpc/kernel/entry_64.S and arch/powerpc/kernel/security.c (bnc#1157038). - CVE-2019-18683: An issue was discovered in drivers/media/platform/vivid, which was exploitable for privilege escalation on some Linux distributions where local users have /dev/video0 access, but only if the driver happens to be loaded. There are multiple race conditions during streaming stopping in this driver (part of the V4L2 subsystem). These issues are caused by wrong mutex locking in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out(), sdr_cap_stop_streaming(), and the corresponding kthreads. At least one of these race conditions leads to a use-after-free (bnc#1155897). - CVE-2019-18809: A memory leak in the af9005_identify_state() function in drivers/media/usb/dvb-usb/af9005.c allowed attackers to cause a denial of service (memory consumption), aka CID-2289adbfa559 (bnc#1156258). - CVE-2019-19046: A memory leak in the __ipmi_bmc_register() function in drivers/char/ipmi/ipmi_msghandler.c was fixed (bnc#1157304). - CVE-2019-19078: A memory leak in the ath10k_usb_hif_tx_sg() function in drivers/net/wireless/ath/ath10k/usb.c allowed attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-b8d17e7d93d2 (bnc#1157032). - CVE-2019-19062: A memory leak in the crypto_report() function in crypto/crypto_user_base.c allowed attackers to cause a denial of service (memory consumption) by triggering crypto_report_alg() failures, aka CID-ffdde5932042 (bnc#1157333). - CVE-2019-19057: Two memory leaks in the mwifiex_pcie_init_evt_ring() function in drivers/net/wireless/marvell/mwifiex/pcie.c allowed attackers to cause a denial of service (memory consumption) by triggering mwifiex_map_pci_memory() failures, aka CID-d10dcb615c8e (bnc#1157193). - CVE-2019-19056: A memory leak in the mwifiex_pcie_alloc_cmdrsp_buf() function in drivers/net/wireless/marvell/mwifiex/pcie.c allowed attackers to cause a denial of service (memory consumption) by triggering mwifiex_map_pci_memory() failures, aka CID-db8fd2cde932 (bnc#1157197). - CVE-2019-19068: A memory leak in the rtl8xxxu_submit_int_urb() function in drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c allowed attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-a2cdd07488e6 (bnc#1157307). - CVE-2019-19063: Two memory leaks in the rtl_usb_probe() function in drivers/net/wireless/realtek/rtlwifi/usb.c allowed attackers to cause a denial of service (memory consumption), aka CID-3f9361695113 (bnc#1157298). - CVE-2019-19227: In the AppleTalk subsystem there was a potential NULL pointer dereference because register_snap_client may return NULL. This will lead to denial of service in net/appletalk/aarp.c and net/appletalk/ddp.c, as demonstrated by unregister_snap_client, aka CID-9804501fa122 (bnc#1157678). - CVE-2019-19081: A memory leak in the nfp_flower_spawn_vnic_reprs() function in drivers/net/ethernet/netronome/nfp/flower/main.c allowed attackers to cause a denial of service (memory consumption), aka CID-8ce39eb5a67a (bnc#1157045). - CVE-2019-19080: Four memory leaks in the nfp_flower_spawn_phy_reprs() function in drivers/net/ethernet/netronome/nfp/flower/main.c allowed attackers to cause a denial of service (memory consumption), aka CID-8572cea1461a (bnc#1157044). - CVE-2019-19065: A memory leak in the sdma_init() function in drivers/infiniband/hw/hfi1/sdma.c allowed attackers to cause a denial of service (memory consumption) by triggering rhashtable_init() failures, aka CID-34b3be18a04e (bnc#1157191). - CVE-2019-19077: A memory leak in the bnxt_re_create_srq() function in drivers/infiniband/hw/bnxt_re/ib_verbs.c allowed attackers to cause a denial of service (memory consumption) by triggering copy to udata failures, aka CID-4a9d46a9fe14 (bnc#1157171). - CVE-2019-19052: A memory leak in the gs_can_open() function in drivers/net/can/usb/gs_usb.c allowed attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-fb5be6a7b486 (bnc#1157324). - CVE-2019-19067: Four memory leaks in the acp_hw_init() function in drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c were fixed. (bnc#1157180). - CVE-2019-19060: A memory leak in the adis_update_scan_mode() function in drivers/iio/imu/adis_buffer.c allowed attackers to cause a denial of service (memory consumption), aka CID-ab612b1daf41 (bnc#1157178). - CVE-2019-19049: A memory leak in the unittest_data_add() function in drivers/of/unittest.c was fixed. (bnc#1157173). - CVE-2019-19075: A memory leak in the ca8210_probe() function in drivers/net/ieee802154/ca8210.c allowed attackers to cause a denial of service (memory consumption) by triggering ca8210_get_platform_data() failures, aka CID-6402939ec86e (bnc#1157162). - CVE-2019-19058: A memory leak in the alloc_sgtable() function in drivers/net/wireless/intel/iwlwifi/fw/dbg.c allowed attackers to cause a denial of service (memory consumption) by triggering alloc_page() failures, aka CID-b4b814fec1a5 (bnc#1157145). - CVE-2019-19074: A memory leak in the ath9k_wmi_cmd() function in drivers/net/wireless/ath/ath9k/wmi.c allowed attackers to cause a denial of service (memory consumption), aka CID-728c1e2a05e4 (bnc#1157143). - CVE-2019-19073: Memory leaks in drivers/net/wireless/ath/ath9k/htc_hst.c allowed attackers to cause a denial of service (memory consumption) by triggering wait_for_completion_timeout() failures. This affects the htc_config_pipe_credits() function, the htc_setup_complete() function, and the htc_connect_service() function, aka CID-853acf7caf10 (bnc#1157070). - CVE-2019-19083: Memory leaks in *clock_source_create() functions under drivers/gpu/drm/amd/display/dc allowed attackers to cause a denial of service (memory consumption). This affects the dce112_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, the dce100_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, the dcn20_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c, the dce120_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, and the dce80_clock_source_create() function in drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c, aka CID-055e547478a1 (bnc#1157049). - CVE-2019-19082: Memory leaks in *create_resource_pool() functions under drivers/gpu/drm/amd/display/dc allowed attackers to cause a denial of service (memory consumption). This affects the dce120_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c, the dce110_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c, the dce100_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c, the dcn10_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c, and the dce112_create_resource_pool() function in drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c, aka CID-104c307147ad (bnc#1157046). - CVE-2019-15916: There was a memory leak in register_queue_kobjects() in net/core/net-sysfs.c, which will cause denial of service (bnc#1149448). The following non-security bugs were fixed: - ACPICA: Never run _REG on system_memory and system_IO (bsc#1051510). - ACPICA: Use %d for signed int print formatting instead of %u (bsc#1051510). - ACPI / hotplug / PCI: Allocate resources directly under the non-hotplug bridge (bsc#1111666). - ACPI / LPSS: Exclude I2C busses shared with PUNIT from pmc_atom_d3_mask (bsc#1051510). - acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node (bsc#1158071). - ACPI / SBS: Fix rare oops when removing modules (bsc#1051510). - ALSA: 6fire: Drop the dead code (git-fixes). - ALSA: cs4236: fix error return comparison of an unsigned integer (git-fixes). - ALSA: firewire-motu: Correct a typo in the clock proc string (git-fixes). - ALSA: hda: Add Cometlake-S PCI ID (git-fixes). - ALSA: hda - Add mute led support for HP ProBook 645 G4 (git-fixes). - ALSA: hda - Fix pending unsol events at shutdown (git-fixes). - ALSA: hda: Fix racy display power access (bsc#1156928). - ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding (git-fixes). - ALSA: hda: hdmi - fix port numbering for ICL and TGL platforms (git-fixes). - ALSA: hda: hdmi - remove redundant code comments (git-fixes). - ALSA: hda/intel: add CometLake PCI IDs (bsc#1156729). - ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC (git-fixes). - ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop (git-fixes). - ALSA: hda/realtek - Move some alc236 pintbls to fallback table (git-fixes). - ALSA: hda/realtek - Move some alc256 pintbls to fallback table (git-fixes). - ALSA: i2c/cs8427: Fix int to char conversion (bsc#1051510). - ALSA: intel8x0m: Register irq handler after register initializations (bsc#1051510). - ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed() (git-fixes). - ALSA: pcm: signedness bug in snd_pcm_plug_alloc() (bsc#1051510). - ALSA: pcm: Yet another missing check of non-cached buffer type (bsc#1111666). - ALSA: seq: Do error checks at creating system ports (bsc#1051510). - ALSA: usb-audio: Add skip_validation option (git-fixes). - ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling (git-fixes). - ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk() (git-fixes). - ALSA: usb-audio: Fix incorrect size check for processing/extension units (git-fixes). - ALSA: usb-audio: Fix missing error check at mixer resolution test (git-fixes). - ALSA: usb-audio: Fix NULL dereference at parsing BADD (git-fixes). - ALSA: usb-audio: not submit urb for stopped endpoint (git-fixes). - ALSA: usb-audio: sound: usb: usb true/false for bool return type (git-fixes). - appledisplay: fix error handling in the scheduled work (git-fixes). - arm64: Update config files. (bsc#1156466) Enable HW_RANDOM_OMAP driver and mark driver omap-rng as supported. - ASoC: davinci: Kill BUG_ON() usage (stable 4.14.y). - ASoC: davinci-mcasp: Handle return value of devm_kasprintf (stable 4.14.y). - ASoC: dpcm: Properly initialise hw->rate_max (bsc#1051510). - ASoC: Intel: hdac_hdmi: Limit sampling rates at dai creation (bsc#1051510). - ASoC: kirkwood: fix external clock probe defer (git-fixes). - ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX (git-fixes). - ASoC: sgtl5000: avoid division by zero if lo_vag is zero (bsc#1051510). - ASoC: tegra_sgtl5000: fix device_node refcounting (bsc#1051510). - ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes (stable 4.14.y). - ASoC: tlv320dac31xx: mark expected switch fall-through (stable 4.14.y). - ata: ep93xx: Use proper enums for directions (bsc#1051510). - ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem (bsc#1111666). - ath10k: avoid possible memory access violation (bsc#1111666). - ath10k: Correct error handling of dma_map_single() (bsc#1111666). - ath10k: fix kernel panic by moving pci flush after napi_disable (bsc#1051510). - ath10k: fix vdev-start timeout on error (bsc#1051510). - ath10k: limit available channels via DT ieee80211-freq-limit (bsc#1051510). - ath10k: skip resetting rx filter for WCN3990 (bsc#1111666). - ath10k: wmi: disable softirq's while calling ieee80211_rx (bsc#1051510). - ath9k: add back support for using active monitor interfaces for tx99 (bsc#1051510). - ath9k: Fix a locking bug in ath9k_add_interface() (bsc#1051510). - ath9k: fix reporting calculated new FFT upper max (bsc#1051510). - ath9k: fix tx99 with monitor mode interface (bsc#1051510). - ath9k_hw: fix uninitialized variable data (bsc#1051510). - ax88172a: fix information leak on short answers (bsc#1051510). - backlight: lm3639: Unconditionally call led_classdev_unregister (bsc#1051510). - Bluetooth: btusb: fix PM leak in error case of setup (bsc#1051510). - Bluetooth: delete a stray unlock (bsc#1051510). - Bluetooth: Fix invalid-free in bcsp_close() (git-fixes). - Bluetooth: Fix memory leak in hci_connect_le_scan (bsc#1051510). - Bluetooth: hci_core: fix init for HCI_USER_CHANNEL (bsc#1051510). - Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS (bsc#1051510). - bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commands (bsc#1104745). - bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commands (bsc#1104745 FATE#325918). - bnxt_en: Update firmware interface spec. to 1.10.0.47 (bsc#1157115) - bnxt_en: Update firmware interface spec. to 1.10.0.89 (bsc#1157115) - bnxt_en: Update firmware interface to 1.10.0.69 (bsc#1157115) - bpf: fix BTF limits (bsc#1109837). - bpf: fix BTF verification of enums (bsc#1109837). - bpf: Fix use after free in subprog's jited symbol removal (bsc#1109837). - brcmfmac: fix full timeout waiting for action frame on-channel tx (bsc#1051510). - brcmfmac: fix wrong strnchr usage (bsc#1111666). - brcmfmac: increase buffer for obtaining firmware capabilities (bsc#1111666). - brcmfmac: reduce timeout for action frame scan (bsc#1051510). - brcmsmac: AP mode: update beacon when TIM changes (bsc#1051510). - brcmsmac: never log "tid x is not agg'able" by default (bsc#1051510). - brcmsmac: Use kvmalloc() for ucode allocations (bsc#1111666). - btrfs: fix log context list corruption after rename exchange operation (bsc#1156494). - can: c_can: c_can_poll(): only read status register after status IRQ (git-fixes). - can: mcba_usb: fix use-after-free on disconnect (git-fixes). - can: peak_usb: fix a potential out-of-sync while decoding packets (git-fixes). - can: peak_usb: fix slab info leak (git-fixes). - can: rx-offload: can_rx_offload_offload_one(): do not increase the skb_queue beyond skb_queue_len_max (git-fixes). - can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak (git-fixes). - can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak (git-fixes). - can: usb_8dev: fix use-after-free on disconnect (git-fixes). - ceph: add missing check in d_revalidate snapdir handling (bsc#1157183). - ceph: do not try to handle hashed dentries in non-O_CREAT atomic_open (bsc#1157184). - ceph: fix use-after-free in __ceph_remove_cap() (bsc#1154058). - ceph: just skip unrecognized info in ceph_reply_info_extra (bsc#1157182). - cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set (bsc#1051510). - cfg80211: call disconnect_wk when AP stops (bsc#1051510). - cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces (bsc#1051510). - cfg80211: validate wmm rule when setting (bsc#1111666). - cgroup,writeback: do not switch wbs immediately on dead wbs if the memcg is dead (bsc#1158645). - cifs: add a helper to find an existing readable handle to a file (bsc#1144333, bsc#1154355). - cifs: avoid using MID 0xFFFF (bsc#1144333, bsc#1154355). - cifs: create a helper to find a writeable handle by path name (bsc#1144333, bsc#1154355). - cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs (bsc#1144333, bsc#1154355). - cifs: fix max ea value size (bsc#1144333, bsc#1154355). - cifs: Fix missed free operations (bsc#1144333, bsc#1154355). - cifs: Fix oplock handling for SMB 2.1+ protocols (bsc#1144333, bsc#1154355). - cifs: Fix retry mid list corruption on reconnects (bsc#1144333, bsc#1154355). - cifs: Fix SMB2 oplock break processing (bsc#1144333, bsc#1154355). - cifs: Fix use after free of file info structures (bsc#1144333, bsc#1154355). - cifs: Force reval dentry if LOOKUP_REVAL flag is set (bsc#1144333, bsc#1154355). - cifs: Force revalidate inode when dentry is stale (bsc#1144333, bsc#1154355). - cifs: Gracefully handle QueryInfo errors during open (bsc#1144333, bsc#1154355). - cifs: move cifsFileInfo_put logic into a work-queue (bsc#1144333, bsc#1154355). - cifs: prepare SMB2_Flush to be usable in compounds (bsc#1144333, bsc#1154355). - cifs: set domainName when a domain-key is used in multiuser (bsc#1144333, bsc#1154355). - cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic (bsc#1144333, bsc#1154355). - cifs: use existing handle for compound_op(OP_SET_INFO) when possible (bsc#1144333, bsc#1154355). - cifs: Use kzfree() to zero out the password (bsc#1144333, bsc#1154355). - clk: at91: avoid sleeping early (git-fixes). - clk: pxa: fix one of the pxa RTC clocks (bsc#1051510). - clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume (bsc#1051510). - clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume (git-fixes). - clk: samsung: Use clk_hw API for calling clk framework from clk notifiers (bsc#1051510). - clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 (git-fixes). - clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines (bsc#1051510). - clocksource/drivers/sh_cmt: Fixup for 64-bit machines (bsc#1051510). - compat_ioctl: handle SIOCOUTQNSD (bsc#1051510). - component: fix loop condition to call unbind() if bind() fails (bsc#1051510). - cpufreq: intel_pstate: Register when ACPI PCCH is present (bsc#1051510). - cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init() (bsc#1051510). - cpufreq: powernv: fix stack bloat and hard limit on number of CPUs (bsc#1051510). - cpufreq: Skip cpufreq resume if it's not suspended (bsc#1051510). - cpufreq: ti-cpufreq: add missing of_node_put() (bsc#1051510). - cpupower: Fix coredump on VMWare (bsc#1051510). - cpupower : Fix cpupower working when cpu0 is offline (bsc#1051510). - cpupower : frequency-set -r option misses the last cpu in related cpu list (bsc#1051510). - crypto: af_alg - cast ki_complete ternary op to int (bsc#1051510). - crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr (bsc#1051510). - crypto: ecdh - fix big endian bug in ECC library (bsc#1051510). - crypto: fix a memory leak in rsa-kcs1pad's encryption mode (bsc#1051510). - crypto: geode-aes - switch to skcipher for cbc(aes) fallback (bsc#1051510). - crypto: mxs-dcp - Fix AES issues (bsc#1051510). - crypto: mxs-dcp - Fix SHA null hashes and output length (bsc#1051510). - crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static (bsc#1051510). - crypto: s5p-sss: Fix Fix argument list alignment (bsc#1051510). - crypto: tgr192 - remove unneeded semicolon (bsc#1051510). - cw1200: Fix a signedness bug in cw1200_load_firmware() (bsc#1051510). - cxgb4: fix panic when attaching to ULD fail (networking-stable-19_11_05). - cxgb4: request the TX CIDX updates to status page (bsc#1127354 bsc#1127371). - dccp: do not leak jiffies on the wire (networking-stable-19_11_05). - dlm: do not leak kernel pointer to userspace (bsc#1051510). - dlm: fix invalid free (bsc#1051510). - dmaengine: dma-jz4780: Do not depend on MACH_JZ4780 (bsc#1051510). - dmaengine: dma-jz4780: Further residue status fix (bsc#1051510). - dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction (bsc#1051510). - dmaengine: imx-sdma: fix use-after-free on probe error path (bsc#1051510). - dmaengine: rcar-dmac: set scatter/gather max segment size (bsc#1051510). - dmaengine: timb_dma: Use proper enum in td_prep_slave_sg (bsc#1051510). - docs: move protection-keys.rst to the core-api book (bsc#1078248). - docs: move protection-keys.rst to the core-api book (FATE#322447, bsc#1078248). - Documentation: debugfs: Document debugfs helper for unsigned long values (git-fixes). - Documentation: x86: convert protection-keys.txt to reST (bsc#1078248). - Documentation: x86: convert protection-keys.txt to reST (FATE#322447, bsc#1078248). - drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 (bsc#1111666). - drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported (bsc#1113956) - drm/etnaviv: fix dumping of iommuv2 (bsc#1113722) - drm: fix module name in edid_firmware log message (bsc#1113956) - drm/i915: Do not dereference request if it may have been retired when (bsc#1142635) - drm/i915: Fix and improve MCR selection logic (bsc#1112178) - drm/i915/gvt: fix dropping obj reference twice (bsc#1111666). - drm/i915: Lock the engine while dumping the active request (bsc#1142635) - drm/i915/pmu: "Frequency" is reported as accumulated cycles (bsc#1112178) - drm/i915: Reacquire priolist cache after dropping the engine lock (bsc#1129770) - drm/i915: Skip modeset for cdclk changes if possible (bsc#1156928). - drm/msm: fix memleak on release (bsc#1111666). - drm/omap: fix max fclk divider for omap36xx (bsc#1113722) - drm/radeon: fix bad DMA from INTERRUPT_CNTL2 (git-fixes). - drm/radeon: fix si_enable_smc_cac() failed issue (bsc#1113722) - Drop scsi-qla2xxx-Fix-memory-leak-when-sending-I-O-fails.patch This patch has introduces an double free. Upstream has dropped it from the scsi-queue before it hit mainline. So let's drop it as well. - e1000e: Drop unnecessary __E1000_DOWN bit twiddling (bsc#1158049). - e1000e: Use dev_get_drvdata where possible (bsc#1158049). - e1000e: Use rtnl_lock to prevent race conditions between net and pci/pm (bsc#1158049). - ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable (bsc#1158646). - ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either (bsc#1158647). - EDAC/ghes: Fix locking and memory barrier issues (bsc#1114279). EDAC/ghes: Do not warn when incrementing refcount on 0 (bsc#1114279). - EDAC/ghes: Fix Use after free in ghes_edac remove path (bsc#1114279). - ext4: fix punch hole for inline_data file systems (bsc#1158640). - ext4: update direct I/O read lock pattern for IOCB_NOWAIT (bsc#1158639). - extcon: cht-wc: Return from default case to avoid warnings (bsc#1051510). - fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper() (bsc#1051510). - fbdev: sbuslib: use checked version of put_user() (bsc#1051510). - ftrace: Introduce PERMANENT ftrace_ops flag (bsc#1120853). - gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist (bsc#1051510). - gpio: mpc8xxx: Do not overwrite default irq_set_type callback (bsc#1051510). - gpio: syscon: Fix possible NULL ptr usage (bsc#1051510). - gsmi: Fix bug in append_to_eventlog sysfs handler (bsc#1051510). - HID: Add ASUS T100CHI keyboard dock battery quirks (bsc#1051510). - HID: Add quirk for Microsoft PIXART OEM mouse (bsc#1051510). - HID: asus: Add T100CHI bluetooth keyboard dock special keys mapping (bsc#1051510). - HID: Fix assumption that devices have inputs (git-fixes). - HID: wacom: generic: Treat serial number and related fields as unsigned (git-fixes). - hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros (bsc#1051510). - hwmon: (pwm-fan) Silence error on probe deferral (bsc#1051510). - hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled (bsc#1051510). - hwrng: omap - Fix RNG wait loop timeout (bsc#1051510). - hypfs: Fix error number left in struct pointer member (bsc#1051510). - i2c: of: Try to find an I2C adapter matching the parent (bsc#1129770) - i40e: enable X710 support (bsc#1151067). - IB/mlx5: Free mpi in mp_slave mode (bsc#1103991). - IB/mlx5: Free mpi in mp_slave mode (bsc#1103991 FATE#326007). - IB/mlx5: Support MLX5_CMD_OP_QUERY_LAG as a DEVX general command (bsc#1103991). - IB/mlx5: Support MLX5_CMD_OP_QUERY_LAG as a DEVX general command (bsc#1103991 FATE#326007). - ibmvnic: Bound waits for device queries (bsc#1155689 ltc#182047). - ibmvnic: Fix completion structure initialization (bsc#1155689 ltc#182047). - ibmvnic: Serialize device queries (bsc#1155689 ltc#182047). - ibmvnic: Terminate waiting device threads after loss of service (bsc#1155689 ltc#182047). - ice: fix potential infinite loop because loop counter being too small (bsc#1118661). - ice: fix potential infinite loop because loop counter being too small (bsc#1118661 FATE#325277). - iio: adc: max9611: explicitly cast gain_selectors (bsc#1051510). - iio: adc: stm32-adc: fix stopping dma (git-fixes). - iio: dac: mcp4922: fix error handling in mcp4922_write_raw (bsc#1051510). - iio: imu: adis16480: assign bias value only if operation succeeded (git-fixes). - iio: imu: adis16480: make sure provided frequency is positive (git-fixes). - iio: imu: adis: assign read val in debugfs hook only if op successful (git-fixes). - iio: imu: adis: assign value only if return code zero in read funcs (git-fixes). - include/linux/bitrev.h: fix constant bitrev (bsc#1114279). - inet: stop leaking jiffies on the wire (networking-stable-19_11_05). - Input: ff-memless - kill timer in destroy() (bsc#1051510). - Input: silead - try firmware reload after unsuccessful resume (bsc#1051510). - Input: st1232 - set INPUT_PROP_DIRECT property (bsc#1051510). - Input: synaptics-rmi4 - clear IRQ enables for F54 (bsc#1051510). - Input: synaptics-rmi4 - destroy F54 poller workqueue when removing (bsc#1051510). - Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver (bsc#1051510). - Input: synaptics-rmi4 - do not consume more data than we have (F11, F12) (bsc#1051510). - Input: synaptics-rmi4 - fix video buffer size (git-fixes). - intel_th: Fix a double put_device() in error path (git-fixes). - iomap: Fix pipe page leakage during splicing (bsc#1158651). - iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros (bsc#1158063). - ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address (bsc#1051510). - ipv4: Return -ENETUNREACH if we can't create route but saddr is valid (networking-stable-19_10_24). - irqdomain: Add the missing assignment of domain->fwnode for named fwnode (bsc#1111666). - iwlwifi: api: annotate compressed BA notif array sizes (bsc#1051510). - iwlwifi: check kasprintf() return value (bsc#1051510). - iwlwifi: drop packets with bad status in CD (bsc#1111666). - iwlwifi: mvm: avoid sending too many BARs (bsc#1051510). - iwlwifi: mvm: do not send keys when entering D3 (bsc#1051510). - iwlwifi: mvm: use correct FIFO length (bsc#1111666). - iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN (bsc#1111666). - iwlwifi: pcie: read correct prph address for newer devices (bsc#1111666). - ixgbe: fix double clean of Tx descriptors with xdp (bsc#1113994 ). - ixgbe: fix double clean of Tx descriptors with xdp (bsc#1113994 FATE#326315 FATE#326317). - ixgbevf: Fix secpath usage for IPsec Tx offload (bsc#1113994 ). - ixgbevf: Fix secpath usage for IPsec Tx offload (bsc#1113994 FATE#326315 FATE#326317). - kABI: Fix for "KVM: x86: Introduce vcpu->arch.xsaves_enabled" (bsc#1158066). - kABI fixup alloc_dax_region (bsc#1158071). - kabi: s390: struct subchannel (git-fixes). - kABI workaround for ath10k hw_filter_reset_required field (bsc#1111666). - kABI workaround for ath10k last_wmi_vdev_start_status field (bsc#1051510). - kABI workaround for iwlwifi iwl_rx_cmd_buffer change (bsc#1111666). - kABI workaround for struct mwifiex_power_cfg change (bsc#1051510). - KVM: s390: fix __insn32_query() inline assembly (git-fixes). - KVM: s390: vsie: Do not shadow CRYCB when no AP and no keys (git-fixes). - KVM: s390: vsie: Return correct values for Invalid CRYCB format (git-fixes). - KVM: SVM: Guard against DEACTIVATE when performing WBINVD/DF_FLUSH (bsc#1114279). - KVM: SVM: Serialize access to the SEV ASID bitmap (bsc#1114279). - KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts (bsc#1158064). - KVM: VMX: Fix conditions for guest IA32_XSS support (bsc#1158065). - KVM: x86: Introduce vcpu->arch.xsaves_enabled (bsc#1158066). - KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast() (bsc#1158067). - libnvdimm: Export the target_node attribute for regions and namespaces (bsc#1158071). - lib/scatterlist: Fix chaining support in sgl_alloc_order() (git-fixes). - lib/scatterlist: Introduce sgl_alloc() and sgl_free() (git-fixes). - liquidio: fix race condition in instruction completion processing (bsc#1051510). - livepatch: Allow to distinguish different version of system state changes (bsc#1071995). - livepatch: Allow to distinguish different version of system state changes (bsc#1071995 fate#323487). - livepatch: Basic API to track system state changes (bsc#1071995 ). - livepatch: Basic API to track system state changes (bsc#1071995 fate#323487). - livepatch: Keep replaced patches until post_patch callback is called (bsc#1071995). - livepatch: Keep replaced patches until post_patch callback is called (bsc#1071995 fate#323487). - livepatch: Selftests of the API for tracking system state changes (bsc#1071995). - livepatch: Selftests of the API for tracking system state changes (bsc#1071995 fate#323487). - loop: add ioctl for changing logical block size (bsc#1108043). - loop: fix no-unmap write-zeroes request behavior (bsc#1158637). - lpfc: size cpu map by last cpu id set (bsc#1157160). - mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED (bsc#1051510). - mac80211: minstrel: fix CCK rate group streams value (bsc#1051510). - mac80211: minstrel: fix sampling/reporting of CCK rates in HT mode (bsc#1051510). - macvlan: schedule bc_work even if error (bsc#1051510). - mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone (git-fixes). - media: au0828: Fix incorrect error messages (bsc#1051510). - media: bdisp: fix memleak on release (git-fixes). - media: cxusb: detect cxusb_ctrl_msg error in query (bsc#1051510). - media: davinci: Fix implicit enum conversion warning (bsc#1051510). - media: exynos4-is: Fix recursive locking in isp_video_release() (git-fixes). - media: fix: media: pci: meye: validate offset to avoid arbitrary access (bsc#1051510). - media: flexcop-usb: ensure -EIO is returned on error condition (git-fixes). - media: imon: invalid dereference in imon_touch_event (bsc#1051510). - media: isif: fix a NULL pointer dereference bug (bsc#1051510). - media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init() (bsc#1051510). - media: pxa_camera: Fix check for pdev->dev.of_node (bsc#1051510). - media: radio: wl1273: fix interrupt masking on release (git-fixes). - media: ti-vpe: vpe: Fix Motion Vector vpdma stride (git-fixes). - media: usbvision: Fix races among open, close, and disconnect (bsc#1051510). - media: vim2m: Fix abort issue (git-fixes). - media: vivid: Set vid_cap_streaming and vid_out_streaming to true (bsc#1051510). - mei: fix modalias documentation (git-fixes). - mei: samples: fix a signedness bug in amt_host_if_call() (bsc#1051510). - mfd: intel-lpss: Add default I2C device properties for Gemini Lake (bsc#1051510). - mfd: max8997: Enale irq-wakeup unconditionally (bsc#1051510). - mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values (bsc#1051510). - mfd: palmas: Assign the right powerhold mask for tps65917 (git-fixes). - mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable (bsc#1051510). - mISDN: Fix type of switch control variable in ctrl_teimanager (bsc#1051510). - mlx5: add parameter to disable enhanced IPoIB (bsc#1142095) - mlx5: add parameter to disable enhanced IPoIB (bsc#1142095) Fix badly backported patch - mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions (bsc#1112374). - mmc: core: fix wl1251 sdio quirks (git-fixes). - mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card (git-fixes). - mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail (bsc#1051510). - mm/compaction.c: clear total_{migrate,free}_scanned before scanning a new zone (git fixes (mm/compaction)). - mmc: sdhci-esdhc-imx: correct the fix of ERR004536 (git-fixes). - mmc: sdhci-of-at91: fix quirk2 overwrite (git-fixes). - mmc: sdio: fix wl1251 vendor id (git-fixes). - mm/debug.c: PageAnon() is true for PageKsm() pages (git fixes (mm/debug)). - mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d() (git fixes (mm/gup)). - mt7601u: fix bbp version check in mt7601u_wait_bbp_ready (bsc#1051510). - mt76x0: init hw capabilities. - mtd: nand: mtk: fix incorrect register setting order about ecc irq. - mtd: spear_smi: Fix Write Burst mode (bsc#1051510). - mtd: spi-nor: fix silent truncation in spi_nor_read() (bsc#1051510). - mwifex: free rx_cmd skb in suspended state (bsc#1111666). - mwifiex: do no submit URB in suspended state (bsc#1111666). - mwifiex: Fix NL80211_TX_POWER_LIMITED (bsc#1051510). - nbd: prevent memory leak (bsc#1158638). - net: add READ_ONCE() annotation in __skb_wait_for_more_packets() (networking-stable-19_11_05). - net: add skb_queue_empty_lockless() (networking-stable-19_11_05). - net: annotate accesses to sk->sk_incoming_cpu (networking-stable-19_11_05). - net: annotate lockless accesses to sk->sk_napi_id (networking-stable-19_11_05). - net: avoid potential infinite loop in tc_ctl_action() (networking-stable-19_10_24). - net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3 (networking-stable-19_10_24). - net: bcmgenet: reset 40nm EPHY on energy detect (networking-stable-19_11_05). - net: bcmgenet: Set phydev->dev_flags only for internal PHYs (networking-stable-19_10_24). - net: dsa: b53: Do not clear existing mirrored port mask (networking-stable-19_11_05). - net: dsa: bcm_sf2: Fix IMP setup for port different than 8 (networking-stable-19_11_05). - net: dsa: fix switch tree list (networking-stable-19_11_05). - net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum (networking-stable-19_11_05). - net: fix sk_page_frag() recursion from memory reclaim (networking-stable-19_11_05). - net: hisilicon: Fix ping latency when deal with high throughput (networking-stable-19_11_05). - net: hns3: change GFP flag during lock period (bsc#1104353 ). - net: hns3: change GFP flag during lock period (bsc#1104353 FATE#326415). - net: hns3: do not query unsupported commands in debugfs (bsc#1104353). - net: hns3: do not query unsupported commands in debugfs (bsc#1104353 FATE#326415). - net: hns3: fix GFP flag error in hclge_mac_update_stats() (bsc#1126390). - net: hns3: fix some reset handshake issue (bsc#1104353 ). - net: hns3: fix some reset handshake issue (bsc#1104353 FATE#326415). - net: hns3: prevent unnecessary MAC TNL interrupt (bsc#1104353 bsc#1134983). - net: hns3: prevent unnecessary MAC TNL interrupt (bsc#1104353 FATE#326415 bsc#1134983). - net: hns: Fix the stray netpoll locks causing deadlock in NAPI path (bsc#1104353). - net: hns: Fix the stray netpoll locks causing deadlock in NAPI path (bsc#1104353 FATE#326415). - net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode (bsc#1089644, ltc#166495, ltc#165544, git-fixes). - net/mlx4_core: Dynamically set guaranteed amount of counters per VF (networking-stable-19_11_05). - net/mlx5e: Fix eswitch debug print of max fdb flow (bsc#1103990 ). - net/mlx5e: Fix eswitch debug print of max fdb flow (bsc#1103990 FATE#326006). - net/mlx5e: Fix ethtool self test: link speed (bsc#1103990 ). - net/mlx5e: Fix ethtool self test: link speed (bsc#1103990 FATE#326006). - net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget (networking-stable-19_11_05). - net/mlx5e: Print a warning when LRO feature is dropped or not allowed (bsc#1103990). - net/mlx5e: Print a warning when LRO feature is dropped or not allowed (bsc#1103990 FATE#326006). - net/mlx5: FWTrace, Reduce stack usage (bsc#1103990). - net/mlx5: FWTrace, Reduce stack usage (bsc#1103990 FATE#326006). - netns: fix GFP flags in rtnl_net_notifyid() (networking-stable-19_11_05). - net: phy: bcm7xxx: define soft_reset for 40nm EPHY (bsc#1119113 ). - net: phy: bcm7xxx: define soft_reset for 40nm EPHY (bsc#1119113 FATE#326472). - net: phylink: Fix flow control resolution (bsc#1119113 ). - net: phylink: Fix flow control resolution (bsc#1119113 FATE#326472). - net: sched: cbs: Avoid division by zero when calculating the port rate (bsc#1109837). - net/sched: cbs: Fix not adding cbs instance to list (bsc#1109837). - net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate (bsc#1109837). - net: sched: fix possible crash in tcf_action_destroy() (bsc#1109837). - net: sched: fix reordering issues (bsc#1109837). - net/smc: avoid fallback in case of non-blocking connect (git-fixes). - net/smc: do not schedule tx_work in SMC_CLOSED state (git-fixes). - net/smc: fix closing of fallback SMC sockets (git-fixes). - net/smc: Fix error path in smc_init (git-fixes). - net/smc: fix ethernet interface refcounting (git-fixes). - net/smc: fix fastopen for non-blocking connect() (git-fixes). - net/smc: fix refcounting for non-blocking connect() (git-fixes). - net/smc: fix refcount non-blocking connect() -part 2 (git-fixes). - net/smc: fix SMCD link group creation with VLAN id (git-fixes). - net/smc: keep vlan_id for SMC-R in smc_listen_work() (git-fixes). - net/smc: original socket family in inet_sock_diag (git-fixes). - net: sock_map, fix missing ulp check in sock hash case (bsc#1109837). - net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow (networking-stable-19_10_24). - net: use skb_queue_empty_lockless() in busy poll contexts (networking-stable-19_11_05). - net: use skb_queue_empty_lockless() in poll() handlers (networking-stable-19_11_05). - net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions (git-fixes). - net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition (git-fixes). - net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol() (networking-stable-19_11_05). - nfc: netlink: fix double device reference drop (git-fixes). - NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error (git-fixes). - nfc: port100: handle command failure cleanly (git-fixes). - nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs (bsc#1109837). - nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs (bsc#1109837). - nl80211: Fix a GET_KEY reply attribute (bsc#1051510). - nvme-tcp: support C2HData with SUCCESS flag (bsc#1157386). - ocfs2: fix panic due to ocfs2_wq is null (bsc#1158644). - ocfs2: fix passing zero to 'PTR_ERR' warning (bsc#1158649). - openvswitch: fix flow command message size (git-fixes). - padata: use smp_mb in padata_reorder to avoid orphaned padata jobs (git-fixes). - PCI/ACPI: Correct error message for ASPM disabling (bsc#1051510). - PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 (bsc#1051510). - PCI: dwc: Fix find_next_bit() usage (bsc#1051510). - PCI: Fix Intel ACS quirk UPDCR register address (bsc#1051510). - PCI/MSI: Fix incorrect MSI-X masking on resume (bsc#1051510). - PCI: pciehp: Do not disable interrupt twice on suspend (bsc#1111666). - PCI/PM: Clear PCIe PME Status even for legacy power management (bsc#1111666). - PCI/PME: Fix possible use-after-free on remove (git-fixes). - PCI/PTM: Remove spurious "d" from granularity message (bsc#1051510). - PCI: rcar: Fix missing MACCTLR register setting in initialization sequence (bsc#1051510). - PCI: sysfs: Ignore lockdep for remove attribute (git-fixes). - PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 (git-fixes). - perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp (bsc#1142924). - phy: phy-twl4030-usb: fix denied runtime access (git-fixes). - pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call (git-fixes). - pinctrl: at91: do not use the same irqchip with multiple gpiochips (git-fixes). - pinctrl: cherryview: Allocate IRQ chip dynamic (git-fixes). - pinctrl: lewisburg: Update pin list according to v1.1v6 (bsc#1051510). - pinctrl: lpc18xx: Use define directive for PIN_CONFIG_GPIO_PIN_INT (bsc#1051510). - pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issues (bsc#1051510). - pinctrl: samsung: Fix device node refcount leaks in init code (bsc#1051510). - pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init (bsc#1051510). - pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init (bsc#1051510). - pinctrl: sunxi: Fix a memory leak in 'sunxi_pinctrl_build_state()' (bsc#1051510). - pinctrl: zynq: Use define directive for PIN_CONFIG_IO_STANDARD (bsc#1051510). - PM / devfreq: Check NULL governor in available_governors_show (git-fixes). - PM / devfreq: exynos-bus: Correct clock enable sequence (bsc#1051510). - PM / devfreq: Lock devfreq in trans_stat_show (git-fixes). - PM / devfreq: passive: fix compiler warning (bsc#1051510). - PM / devfreq: passive: Use non-devm notifiers (bsc#1051510). - PM / hibernate: Check the success of generating md5 digest before hibernation (bsc#1051510). - powerpc/64: Make meltdown reporting Book3S 64 specific (bsc#1091041). - powerpc/book3s64/hash: Use secondary hash for bolted mapping if the primary is full (bsc#1157778 ltc#182520). - powerpc/bpf: Fix tail call implementation (bsc#1157698). - powerpc/pseries: address checkpatch warnings in dlpar_offline_cpu (bsc#1156700 ltc#182459). - powerpc/pseries: Do not fail hash page table insert for bolted mapping (bsc#1157778 ltc#182520). - powerpc/pseries: Do not opencode HPTE_V_BOLTED (bsc#1157778 ltc#182520). - powerpc/pseries: safely roll back failed DLPAR cpu add (bsc#1156700 ltc#182459). - powerpc/security/book3s64: Report L1TF status in sysfs (bsc#1091041). - powerpc/security: Fix wrong message when RFI Flush is disable (bsc#1131107). - powerpc/xive: Prevent page fault issues in the machine crash handler (bsc#1156882 ltc#182435). - power: reset: at91-poweroff: do not procede if at91_shdwc is allocated (bsc#1051510). - power: supply: ab8500_fg: silence uninitialized variable warnings (bsc#1051510). - power: supply: twl4030_charger: disable eoc interrupt on linear charge (bsc#1051510). - power: supply: twl4030_charger: fix charging current out-of-bounds (bsc#1051510). - ppdev: fix PPGETTIME/PPSETTIME ioctls (bsc#1051510). - printk: Export console_printk (bsc#1071995). - printk: Export console_printk (bsc#1071995 fate#323487). - pwm: bcm-iproc: Prevent unloading the driver module while in use (git-fixes). - pwm: lpss: Only set update bit if we are actually changing the settings (bsc#1051510). - qxl: fix null-pointer crash during suspend (bsc#1111666). - r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2 (networking-stable-19_11_05). - RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices (bsc#1157115) - RDMA/efa: Clear the admin command buffer prior to its submission (git-fixes) Patch was already picked through Amazon driver repo but was not marked with a Git-commit tag - RDMA/hns: Fix comparison of unsigned long variable 'end' with less than zero (bsc#1104427 bsc#1137236). - RDMA/hns: Fix comparison of unsigned long variable 'end' with less than zero (bsc#1104427 FATE#326416 bsc#1137236). - RDMA/hns: Fix wrong assignment of qp_access_flags (bsc#1104427 ). - RDMA/hns: Fix wrong assignment of qp_access_flags (bsc#1104427 FATE#326416). - regulator: ab8500: Remove AB8505 USB regulator (bsc#1051510). - regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id (bsc#1051510). - remoteproc: Check for NULL firmwares in sysfs interface (git-fixes). - Remove patches that reportedly cause regression (bsc#1155689 ltc#182047). - reset: fix of_reset_simple_xlate kerneldoc comment (bsc#1051510). - reset: Fix potential use-after-free in __of_reset_control_get() (bsc#1051510). - reset: fix reset_control_get_exclusive kerneldoc comment (bsc#1051510). - Revert "drm/etnaviv: fix dumping of iommuv2 (bsc#1113722)" This reverts commit 71e3a1b8d8cf73f711f3e4100aa51f68e631f94f. ATM the backported patch does not build on x86. - rpm/kernel-binary.spec.in: add COMPRESS_VMLINUX (bnc#1155921) Let COMPRESS_VMLINUX determine the compression used for vmlinux. By default (historically), it is gz. - rpm/kernel-source.spec.in: Fix dependency of kernel-devel (bsc#1154043) - rt2800: remove errornous duplicate condition (git-fixes). - rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument (bsc#1051510). - rtlwifi: btcoex: Use proper enumerated types for Wi-Fi only interface (bsc#1111666). - rtlwifi: Remove unnecessary NULL check in rtl_regd_init (bsc#1051510). - rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information (bsc#1051510). - rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer address (bsc#1051510). - rtlwifi: rtl8192de: Fix missing enable interrupt flag (bsc#1051510). - s390/bpf: fix lcgr instruction encoding (bsc#1051510). - s390/bpf: use 32-bit index for tail calls (bsc#1051510). - s390/cio: avoid calling strlen on null pointer (bsc#1051510). - s390/cio: exclude subchannels with no parent from pseudo check (bsc#1051510). - s390/cio: fix virtio-ccw DMA without PV (git-fixes). - s390/cmm: fix information leak in cmm_timeout_handler() (bsc#1051510). - s390: fix stfle zero padding (bsc#1051510). - s390/idle: fix cpu idle time calculation (bsc#1051510). - s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported (bsc#1051510). - s390/process: avoid potential reading of freed stack (bsc#1051510). - s390/qdio: do not touch the dsci in tiqdio_add_input_queues() (bsc#1051510). - s390/qdio: (re-)initialize tiqdio list entries (bsc#1051510). - s390/qeth: return proper errno on IO error (bsc#1051510). - s390/setup: fix boot crash for machine without EDAT-1 (bsc#1051510 bsc#1140948). - s390/setup: fix early warning messages (bsc#1051510 bsc#1140948). - s390/topology: avoid firing events before kobjs are created (bsc#1051510). - s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity (git-fixes). - s390/zcrypt: fix memleak at release (git-fixes). - scsi: lpfc: Add enablement of multiple adapter dumps (bsc#1154601). - scsi: lpfc: Add registration for CPU Offline/Online events (bsc#1154601). - scsi: lpfc: Change default IRQ model on AMD architectures (bsc#1154601). - scsi: lpfc: Clarify FAWNN error message (bsc#1154601). - scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq() (bsc#1154601). - scsi: lpfc: Fix a kernel warning triggered by lpfc_sli4_enable_intr() (bsc#1154601). - scsi: lpfc: fix build error of lpfc_debugfs.c for vfree/vmalloc (bsc#1154601). - scsi: lpfc: Fix configuration of BB credit recovery in service parameters (bsc#1154601). - scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences (bsc#1154601). - scsi: lpfc: fix: Coverity: lpfc_get_scsi_buf_s3(): Null pointer dereferences (bsc#1154601). - scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow (bsc#1154601). - scsi: lpfc: Fix dynamic fw log enablement check (bsc#1154601). - scsi: lpfc: fix inlining of lpfc_sli4_cleanup_poll_list() (bsc#1154601). - scsi: lpfc: Fix kernel crash at lpfc_nvme_info_show during remote port bounce (bsc#1154601). - scsi: lpfc: Fix lpfc_cpumask_of_node_init() (bsc#1154601). - scsi: lpfc: Fix NULL check before mempool_destroy is not needed (bsc#1154601). - scsi: lpfc: Fix Oops in nvme_register with target logout/login (bsc#1151900). - scsi: lpfc: fix spelling error in MAGIC_NUMER_xxx (bsc#1154601). - scsi: lpfc: Fix unexpected error messages during RSCN handling (bsc#1154601). - scsi: lpfc: Honor module parameter lpfc_use_adisc (bsc#1153628). - scsi: lpfc: Honor module parameter lpfc_use_adisc (bsc#1154601). - scsi: lpfc: Initialize cpu_map for not present cpus (bsc#1154601). - scsi: lpfc: lpfc_attr: Fix Use plain integer as NULL pointer (bsc#1154601). - scsi: lpfc: lpfc_nvmet: Fix Use plain integer as NULL pointer (bsc#1154601). - scsi: lpfc: Make lpfc_debugfs_ras_log_data static (bsc#1154601). - scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ (bsc#1154601). - scsi: lpfc: Raise config max for lpfc_fcp_mq_threshold variable (bsc#1154601). - scsi: lpfc: revise nvme max queues to be hdwq count (bsc#1154601). - scsi: lpfc: Sync with FC-NVMe-2 SLER change to require Conf with SLER (bsc#1154601). - scsi: lpfc: Update lpfc version to 12.6.0.1 (bsc#1154601). - scsi: lpfc: Update lpfc version to 12.6.0.2 (bsc#1154601). - scsi: lpfc: use hdwq assigned cpu for allocation (bsc#1157160). - scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Allow PLOGI in target mode (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Change discovery state before PLOGI (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Configure local loop for N2N target (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Do not call qlt_async_event twice (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Do not defer relogin unconditonally (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Drop superfluous INIT_WORK of del_work (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan (bsc#1138039). - scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Initialize free_work before flushing it (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: Send Notify ACK after N2N PLOGI (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: qla2xxx: unregister ports after GPN_FT failure (bsc#1138039). - scsi: qla2xxx: Use correct number of vectors for online CPUs (bsc#1137223). - scsi: qla2xxx: Use explicit LOGO in target mode (bsc#1157424, bsc#1157908. bsc#1117169, bsc#1151548). - scsi: zfcp: fix request object use-after-free in send path causing wrong traces (bsc#1051510). - sctp: change sctp_prot .no_autobind with true (networking-stable-19_10_24). - sctp: fix SCTP regression (bsc#1158082) (networking-stable-19_10_24 bsc#1158082). - selftests: net: reuseport_dualstack: fix uninitalized parameter (networking-stable-19_11_05). - serial: mxs-auart: Fix potential infinite loop (bsc#1051510). - serial: samsung: Enable baud clock for UART reset procedure in resume (bsc#1051510). - serial: uartps: Fix suspend functionality (bsc#1051510). - signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal (bsc#1157463). - slcan: Fix memory leak in error path (bsc#1051510). - slip: Fix memory leak in slip_open error path (bsc#1051510). - slip: Fix use-after-free Read in slip_open (bsc#1051510). - smb3: fix leak in "open on server" perf counter (bsc#1144333, bsc#1154355). - smb3: fix signing verification of large reads (bsc#1144333, bsc#1154355). - smb3: fix unmount hang in open_shroot (bsc#1144333, bsc#1154355). - smb3: improve handling of share deleted (and share recreated) (bsc#1144333, bsc#1154355). - smb3: Incorrect size for netname negotiate context (bsc#1144333, bsc#1154355). - soc: imx: gpc: fix PDN delay (bsc#1051510). - soc: qcom: wcnss_ctrl: Avoid string overflow (bsc#1051510). - Sort series.conf. - spi: atmel: Fix CS high support (bsc#1051510). - spi: atmel: fix handling of cs_change set on non-last xfer (bsc#1051510). - spi: fsl-lpspi: Prevent FIFO under/overrun by default (bsc#1051510). - spi: mediatek: Do not modify spi_transfer when transfer (bsc#1051510). - spi: mediatek: use correct mata->xfer_len when in fifo transfer (bsc#1051510). - spi: pic32: Use proper enum in dmaengine_prep_slave_rg (bsc#1051510). - spi: rockchip: initialize dma_slave_config properly (bsc#1051510). - spi: spidev: Fix OF tree warning logic (bsc#1051510). - supported.conf: - synclink_gt(): fix compat_ioctl() (bsc#1051510). - tcp_nv: fix potential integer overflow in tcpnv_acked (bsc#1051510). - thunderbolt: Fix lockdep circular locking depedency warning (git-fixes). - tipc: Avoid copying bytes beyond the supplied data (bsc#1051510). - tipc: check bearer name with right length in tipc_nl_compat_bearer_enable (bsc#1051510). - tipc: check link name with right length in tipc_nl_compat_link_set (bsc#1051510). - tipc: check msg->req data len in tipc_nl_compat_bearer_disable (bsc#1051510). - tipc: compat: allow tipc commands without arguments (bsc#1051510). - tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path (bsc#1051510). - tipc: fix wrong timeout input for tipc_wait_for_cond() (bsc#1051510). - tipc: handle the err returned from cmd header function (bsc#1051510). - tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb (bsc#1051510). - tipc: tipc clang warning (bsc#1051510). - tools: bpftool: fix arguments for p_err() in do_event_pipe() (bsc#1109837). - tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr() (bsc#1111666). - tpm: add check after commands attribs tab allocation (bsc#1051510). - tty: serial: fsl_lpuart: use the sg count from dma_map_sg (bsc#1051510). - tty: serial: imx: use the sg count from dma_map_sg (bsc#1051510). - tty: serial: msm_serial: Fix flow control (bsc#1051510). - tty: serial: pch_uart: correct usage of dma_unmap_sg (bsc#1051510). - tun: fix data-race in gro_normal_list() (bsc#1111666). - UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"). - ubifs: Correctly initialize c->min_log_bytes (bsc#1158641). - ubifs: Limit the number of pages in shrink_liability (bsc#1158643). - udp: use skb_queue_empty_lockless() (networking-stable-19_11_05). - Update patches.suse/ipv6-defrag-drop-non-last-frags-smaller-than-min-mtu.patch (add bsc#1141054). - Update patches.suse/RDMA-Fix-goto-target-to-release-the-allocated-memory.patch (bsc#1050244 FATE#322915 bsc#1157171 CVE-2019-19077). - USB: chaoskey: fix error case of a timeout (git-fixes). - usb: chipidea: Fix otg event handler (bsc#1051510). - usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started (bsc#1051510). - usb: dwc3: gadget: Check ENBLSLPM before sending ep command (bsc#1051510). - usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status() (bsc#1051510). - usb: gadget: uvc: configfs: Drop leaked references to config items (bsc#1051510). - usb: gadget: uvc: configfs: Prevent format changes after linking header (bsc#1051510). - usb: gadget: uvc: Factor out video USB request queueing (bsc#1051510). - usb: gadget: uvc: Only halt video streaming endpoint in bulk mode (bsc#1051510). - USBIP: add config dependency for SGL_ALLOC (git-fixes). - usbip: Fix free of unallocated memory in vhci tx (git-fixes). - usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path (git-fixes). - usbip: Implement SG support to vhci-hcd and stub driver (git-fixes). - usbip: tools: fix fd leakage in the function of read_attr_usbip_status (git-fixes). - USB: misc: appledisplay: fix backlight update_status return code (bsc#1051510). - usb-serial: cp201x: support Mark-10 digital force gauge (bsc#1051510). - USB: serial: mos7720: fix remote wakeup (git-fixes). - USB: serial: mos7840: add USB ID to support Moxa UPort 2210 (bsc#1051510). - USB: serial: mos7840: fix remote wakeup (git-fixes). - USB: serial: option: add support for DW5821e with eSIM support (bsc#1051510). - USB: serial: option: add support for Foxconn T77W968 LTE modules (bsc#1051510). - usb: xhci-mtk: fix ISOC error when interval is zero (bsc#1051510). - vfio-ccw: Fix misleading comment when setting orb.cmd.c64 (bsc#1051510). - vfio: ccw: push down unsupported IDA check (bsc#1156471 LTC#182362). - vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn (bsc#1051510). - video/hdmi: Fix AVI bar unpack (git-fixes). - virtio_console: allocate inbufs in add_port() only if it is needed (git-fixes). - virtio_ring: fix return code on DMA mapping fails (git-fixes). - virtio/s390: fix race on airq_areas (bsc#1051510). - vmxnet3: turn off lro when rxcsum is disabled (bsc#1157499). - vsock/virtio: fix sock refcnt holding during the shutdown (git-fixes). - watchdog: meson: Fix the wrong value of left time (bsc#1051510). - wil6210: drop Rx multicast packets that are looped-back to STA (bsc#1111666). - wil6210: fix debugfs memory access alignment (bsc#1111666). - wil6210: fix invalid memory access for rx_buff_mgmt debugfs (bsc#1111666). - wil6210: fix L2 RX status handling (bsc#1111666). - wil6210: fix locking in wmi_call (bsc#1111666). - wil6210: fix RGF_CAF_ICR address for Talyn-MB (bsc#1111666). - wil6210: prevent usage of tx ring 0 for eDMA (bsc#1111666). - wil6210: set edma variables only for Talyn-MB devices (bsc#1111666). - x86/alternatives: Add int3_emulate_call() selftest (bsc#1153811). - x86/alternatives: Fix int3_emulate_call() selftest stack corruption (bsc#1153811). - x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt (bsc#1078248). - x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt (FATE#322447, bsc#1078248). - x86/pkeys: Update documentation about availability (bsc#1078248). - x86/pkeys: Update documentation about availability (FATE#322447, bsc#1078248). - x86/resctrl: Fix potential lockdep warning (bsc#1114279). - x86/resctrl: Prevent NULL pointer dereference when reading mondata (bsc#1114279). - x86/speculation/taa: Fix printing of TAA_MSG_SMT on IBRS_ALL CPUs (bsc#1158068). - xfrm: fix sa selector validation (bsc#1156609). - xfrm: Fix xfrm sel prefix length validation (git-fixes). - xfs: Sanity check flags of Q_XQUOTARM call (bsc#1158652). - xsk: Fix registration of Rx-only sockets (bsc#1109837). - xsk: relax UMEM headroom alignment (bsc#1109837). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2675=1 Package List: - openSUSE Leap 15.1 (noarch): kernel-devel-4.12.14-lp151.28.36.1 kernel-docs-4.12.14-lp151.28.36.1 kernel-docs-html-4.12.14-lp151.28.36.1 kernel-macros-4.12.14-lp151.28.36.1 kernel-source-4.12.14-lp151.28.36.1 kernel-source-vanilla-4.12.14-lp151.28.36.1 - openSUSE Leap 15.1 (x86_64): kernel-debug-4.12.14-lp151.28.36.1 kernel-debug-base-4.12.14-lp151.28.36.1 kernel-debug-base-debuginfo-4.12.14-lp151.28.36.1 kernel-debug-debuginfo-4.12.14-lp151.28.36.1 kernel-debug-debugsource-4.12.14-lp151.28.36.1 kernel-debug-devel-4.12.14-lp151.28.36.1 kernel-debug-devel-debuginfo-4.12.14-lp151.28.36.1 kernel-default-4.12.14-lp151.28.36.1 kernel-default-base-4.12.14-lp151.28.36.1 kernel-default-base-debuginfo-4.12.14-lp151.28.36.1 kernel-default-debuginfo-4.12.14-lp151.28.36.1 kernel-default-debugsource-4.12.14-lp151.28.36.1 kernel-default-devel-4.12.14-lp151.28.36.1 kernel-default-devel-debuginfo-4.12.14-lp151.28.36.1 kernel-kvmsmall-4.12.14-lp151.28.36.1 kernel-kvmsmall-base-4.12.14-lp151.28.36.1 kernel-kvmsmall-base-debuginfo-4.12.14-lp151.28.36.1 kernel-kvmsmall-debuginfo-4.12.14-lp151.28.36.1 kernel-kvmsmall-debugsource-4.12.14-lp151.28.36.1 kernel-kvmsmall-devel-4.12.14-lp151.28.36.1 kernel-kvmsmall-devel-debuginfo-4.12.14-lp151.28.36.1 kernel-obs-build-4.12.14-lp151.28.36.1 kernel-obs-build-debugsource-4.12.14-lp151.28.36.1 kernel-obs-qa-4.12.14-lp151.28.36.1 kernel-syms-4.12.14-lp151.28.36.1 kernel-vanilla-4.12.14-lp151.28.36.1 kernel-vanilla-base-4.12.14-lp151.28.36.1 kernel-vanilla-base-debuginfo-4.12.14-lp151.28.36.1 kernel-vanilla-debuginfo-4.12.14-lp151.28.36.1 kernel-vanilla-debugsource-4.12.14-lp151.28.36.1 kernel-vanilla-devel-4.12.14-lp151.28.36.1 kernel-vanilla-devel-debuginfo-4.12.14-lp151.28.36.1 References: https://www.suse.com/security/cve/CVE-2019-14895.html https://www.suse.com/security/cve/CVE-2019-14901.html https://www.suse.com/security/cve/CVE-2019-15213.html https://www.suse.com/security/cve/CVE-2019-15916.html https://www.suse.com/security/cve/CVE-2019-18660.html https://www.suse.com/security/cve/CVE-2019-18683.html https://www.suse.com/security/cve/CVE-2019-18809.html https://www.suse.com/security/cve/CVE-2019-19046.html https://www.suse.com/security/cve/CVE-2019-19049.html https://www.suse.com/security/cve/CVE-2019-19052.html https://www.suse.com/security/cve/CVE-2019-19056.html https://www.suse.com/security/cve/CVE-2019-19057.html https://www.suse.com/security/cve/CVE-2019-19058.html https://www.suse.com/security/cve/CVE-2019-19060.html https://www.suse.com/security/cve/CVE-2019-19062.html https://www.suse.com/security/cve/CVE-2019-19063.html https://www.suse.com/security/cve/CVE-2019-19065.html https://www.suse.com/security/cve/CVE-2019-19067.html https://www.suse.com/security/cve/CVE-2019-19068.html https://www.suse.com/security/cve/CVE-2019-19073.html https://www.suse.com/security/cve/CVE-2019-19074.html https://www.suse.com/security/cve/CVE-2019-19075.html https://www.suse.com/security/cve/CVE-2019-19077.html https://www.suse.com/security/cve/CVE-2019-19078.html https://www.suse.com/security/cve/CVE-2019-19080.html https://www.suse.com/security/cve/CVE-2019-19081.html https://www.suse.com/security/cve/CVE-2019-19082.html https://www.suse.com/security/cve/CVE-2019-19083.html https://www.suse.com/security/cve/CVE-2019-19227.html https://www.suse.com/security/cve/CVE-2019-19524.html https://www.suse.com/security/cve/CVE-2019-19525.html https://www.suse.com/security/cve/CVE-2019-19528.html https://www.suse.com/security/cve/CVE-2019-19529.html https://www.suse.com/security/cve/CVE-2019-19530.html https://www.suse.com/security/cve/CVE-2019-19531.html https://www.suse.com/security/cve/CVE-2019-19534.html https://www.suse.com/security/cve/CVE-2019-19536.html https://www.suse.com/security/cve/CVE-2019-19543.html https://bugzilla.suse.com/1051510 https://bugzilla.suse.com/1071995 https://bugzilla.suse.com/1078248 https://bugzilla.suse.com/1089644 https://bugzilla.suse.com/1091041 https://bugzilla.suse.com/1103990 https://bugzilla.suse.com/1103991 https://bugzilla.suse.com/1104353 https://bugzilla.suse.com/1104427 https://bugzilla.suse.com/1104745 https://bugzilla.suse.com/1108043 https://bugzilla.suse.com/1109837 https://bugzilla.suse.com/1111666 https://bugzilla.suse.com/1112178 https://bugzilla.suse.com/1112374 https://bugzilla.suse.com/1113722 https://bugzilla.suse.com/1113956 https://bugzilla.suse.com/1113994 https://bugzilla.suse.com/1114279 https://bugzilla.suse.com/1117169 https://bugzilla.suse.com/1118661 https://bugzilla.suse.com/1119113 https://bugzilla.suse.com/1120853 https://bugzilla.suse.com/1126390 https://bugzilla.suse.com/1127354 https://bugzilla.suse.com/1127371 https://bugzilla.suse.com/1129770 https://bugzilla.suse.com/1131107 https://bugzilla.suse.com/1134983 https://bugzilla.suse.com/1137223 https://bugzilla.suse.com/1137236 https://bugzilla.suse.com/1138039 https://bugzilla.suse.com/1140948 https://bugzilla.suse.com/1141054 https://bugzilla.suse.com/1142095 https://bugzilla.suse.com/1142635 https://bugzilla.suse.com/1142924 https://bugzilla.suse.com/1144333 https://bugzilla.suse.com/1146519 https://bugzilla.suse.com/1146544 https://bugzilla.suse.com/1149448 https://bugzilla.suse.com/1151067 https://bugzilla.suse.com/1151548 https://bugzilla.suse.com/1151900 https://bugzilla.suse.com/1153628 https://bugzilla.suse.com/1153811 https://bugzilla.suse.com/1154043 https://bugzilla.suse.com/1154058 https://bugzilla.suse.com/1154355 https://bugzilla.suse.com/1154601 https://bugzilla.suse.com/1155689 https://bugzilla.suse.com/1155897 https://bugzilla.suse.com/1155921 https://bugzilla.suse.com/1156258 https://bugzilla.suse.com/1156466 https://bugzilla.suse.com/1156471 https://bugzilla.suse.com/1156494 https://bugzilla.suse.com/1156609 https://bugzilla.suse.com/1156700 https://bugzilla.suse.com/1156729 https://bugzilla.suse.com/1156882 https://bugzilla.suse.com/1156928 https://bugzilla.suse.com/1157032 https://bugzilla.suse.com/1157038 https://bugzilla.suse.com/1157042 https://bugzilla.suse.com/1157044 https://bugzilla.suse.com/1157045 https://bugzilla.suse.com/1157046 https://bugzilla.suse.com/1157049 https://bugzilla.suse.com/1157070 https://bugzilla.suse.com/1157115 https://bugzilla.suse.com/1157143 https://bugzilla.suse.com/1157145 https://bugzilla.suse.com/1157158 https://bugzilla.suse.com/1157160 https://bugzilla.suse.com/1157162 https://bugzilla.suse.com/1157171 https://bugzilla.suse.com/1157173 https://bugzilla.suse.com/1157178 https://bugzilla.suse.com/1157180 https://bugzilla.suse.com/1157182 https://bugzilla.suse.com/1157183 https://bugzilla.suse.com/1157184 https://bugzilla.suse.com/1157191 https://bugzilla.suse.com/1157193 https://bugzilla.suse.com/1157197 https://bugzilla.suse.com/1157298 https://bugzilla.suse.com/1157304 https://bugzilla.suse.com/1157307 https://bugzilla.suse.com/1157324 https://bugzilla.suse.com/1157333 https://bugzilla.suse.com/1157386 https://bugzilla.suse.com/1157424 https://bugzilla.suse.com/1157463 https://bugzilla.suse.com/1157499 https://bugzilla.suse.com/1157678 https://bugzilla.suse.com/1157698 https://bugzilla.suse.com/1157778 https://bugzilla.suse.com/1157908 https://bugzilla.suse.com/1158049 https://bugzilla.suse.com/1158063 https://bugzilla.suse.com/1158064 https://bugzilla.suse.com/1158065 https://bugzilla.suse.com/1158066 https://bugzilla.suse.com/1158067 https://bugzilla.suse.com/1158068 https://bugzilla.suse.com/1158071 https://bugzilla.suse.com/1158082 https://bugzilla.suse.com/1158381 https://bugzilla.suse.com/1158394 https://bugzilla.suse.com/1158398 https://bugzilla.suse.com/1158407 https://bugzilla.suse.com/1158410 https://bugzilla.suse.com/1158413 https://bugzilla.suse.com/1158417 https://bugzilla.suse.com/1158427 https://bugzilla.suse.com/1158445 https://bugzilla.suse.com/1158637 https://bugzilla.suse.com/1158638 https://bugzilla.suse.com/1158639 https://bugzilla.suse.com/1158640 https://bugzilla.suse.com/1158641 https://bugzilla.suse.com/1158643 https://bugzilla.suse.com/1158644 https://bugzilla.suse.com/1158645 https://bugzilla.suse.com/1158646 https://bugzilla.suse.com/1158647 https://bugzilla.suse.com/1158649 https://bugzilla.suse.com/1158651 https://bugzilla.suse.com/1158652 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2668-1: important: Security update for clamav
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for clamav ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2668-1 Rating: important References: #1157763 Cross-References: CVE-2019-15961 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for clamav fixes the following issues: - CVE-2019-15961: Fixed a denial of service which might occur when scanning a specially crafted email file as (bsc#1157763). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2668=1 Package List: - openSUSE Leap 15.1 (x86_64): clamav-0.100.3-lp151.2.6.1 clamav-debuginfo-0.100.3-lp151.2.6.1 clamav-debugsource-0.100.3-lp151.2.6.1 clamav-devel-0.100.3-lp151.2.6.1 libclamav7-0.100.3-lp151.2.6.1 libclamav7-debuginfo-0.100.3-lp151.2.6.1 libclammspack0-0.100.3-lp151.2.6.1 libclammspack0-debuginfo-0.100.3-lp151.2.6.1 References: https://www.suse.com/security/cve/CVE-2019-15961.html https://bugzilla.suse.com/1157763 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2669-1: moderate: Security update for dnsmasq
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for dnsmasq ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2669-1 Rating: moderate References: #1076958 #1138743 #1152539 #1154849 #1156543 Cross-References: CVE-2017-15107 CVE-2019-14834 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves two vulnerabilities and has three fixes is now available. Description: This update for dnsmasq fixes the following issues: Security issues fixed: - CVE-2019-14834: Fixed a memory leak which could have allowed to remote attackers to cause denial of service via DHCP response creation (bsc#1154849) - CVE-2017-15107: Fixed a vulnerability in DNSSEC implementation. Processing of wildcard synthesized NSEC records may result improper validation for non-existance (bsc#1076958). Other issues addressed: - Included linux/sockios.h to get SIOCGSTAMP (bsc#1156543). - Removed cache size limit (bsc#1138743). - bsc#1152539: include config files from /etc/dnsmasq.d/*.conf . This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2669=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): dnsmasq-2.78-lp151.5.3.1 dnsmasq-debuginfo-2.78-lp151.5.3.1 dnsmasq-debugsource-2.78-lp151.5.3.1 dnsmasq-utils-2.78-lp151.5.3.1 dnsmasq-utils-debuginfo-2.78-lp151.5.3.1 References: https://www.suse.com/security/cve/CVE-2017-15107.html https://www.suse.com/security/cve/CVE-2019-14834.html https://bugzilla.suse.com/1076958 https://bugzilla.suse.com/1138743 https://bugzilla.suse.com/1152539 https://bugzilla.suse.com/1154849 https://bugzilla.suse.com/1156543 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2670-1: moderate: Security update for munge
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for munge ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2670-1 Rating: moderate References: #1155075 Cross-References: CVE-2019-3691 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for munge fixes the following issues: Security issue fixed: - CVE-2019-3691: Fixed a Local privilege escalation vulnerability which allowed escalation from munge to root (bsc#1155075). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2670=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): libmunge2-0.5.13-lp151.4.3.1 libmunge2-debuginfo-0.5.13-lp151.4.3.1 munge-0.5.13-lp151.4.3.1 munge-debuginfo-0.5.13-lp151.4.3.1 munge-debugsource-0.5.13-lp151.4.3.1 munge-devel-0.5.13-lp151.4.3.1 - openSUSE Leap 15.1 (x86_64): libmunge2-32bit-0.5.13-lp151.4.3.1 libmunge2-32bit-debuginfo-0.5.13-lp151.4.3.1 munge-devel-32bit-0.5.13-lp151.4.3.1 References: https://www.suse.com/security/cve/CVE-2019-3691.html https://bugzilla.suse.com/1155075 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2671-1: moderate: Security update for opencv
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for opencv ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2671-1 Rating: moderate References: #1144348 #1144352 #1149742 #1154091 Cross-References: CVE-2019-14491 CVE-2019-14492 CVE-2019-15939 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves three vulnerabilities and has one errata is now available. Description: This update for opencv fixes the following issues: Security issues fixed: - CVE-2019-14491: Fixed an out of bounds read in the function cv:predictOrdered<cv:HaarEvaluator>, leading to DOS (bsc#1144352). - CVE-2019-14492: Fixed an out of bounds read/write in the function HaarEvaluator:OptFeature:calc, which leads to denial of service (bsc#1144348). - CVE-2019-15939: Fixed a divide-by-zero error in cv:HOGDescriptor:getDescriptorSize (bsc#1149742). Non-security issue fixed: - Fixed an issue in opencv-devel that broke builds with "No rule to make target opencv_calib3d-NOTFOUND" (bsc#1154091). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2671=1 Package List: - openSUSE Leap 15.1 (x86_64): libopencv3_3-3.3.1-lp151.6.3.1 libopencv3_3-debuginfo-3.3.1-lp151.6.3.1 opencv-3.3.1-lp151.6.3.1 opencv-debuginfo-3.3.1-lp151.6.3.1 opencv-debugsource-3.3.1-lp151.6.3.1 opencv-devel-3.3.1-lp151.6.3.1 opencv-doc-3.3.1-lp151.6.3.1 python2-opencv-3.3.1-lp151.6.3.1 python2-opencv-debuginfo-3.3.1-lp151.6.3.1 python3-opencv-3.3.1-lp151.6.3.1 python3-opencv-debuginfo-3.3.1-lp151.6.3.1 References: https://www.suse.com/security/cve/CVE-2019-14491.html https://www.suse.com/security/cve/CVE-2019-14492.html https://www.suse.com/security/cve/CVE-2019-15939.html https://bugzilla.suse.com/1144348 https://bugzilla.suse.com/1144352 https://bugzilla.suse.com/1149742 https://bugzilla.suse.com/1154091 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2672-1: moderate: Security update for permissions
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for permissions ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2672-1 Rating: moderate References: #1093414 #1150734 #1157198 Cross-References: CVE-2019-3688 CVE-2019-3690 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves two vulnerabilities and has one errata is now available. Description: This update for permissions fixes the following issues: - CVE-2019-3688: Changed wrong ownership in /usr/sbin/pinger to root:squid which could have allowed a squid user to gain persistence by changing the binary (bsc#1093414). - CVE-2019-3690: Fixed a privilege escalation through untrusted symbolic links (bsc#1150734). - Fixed a regression which caused sagmentation fault (bsc#1157198). This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2672=1 Package List: - openSUSE Leap 15.1 (i586 x86_64): permissions-20181116-lp151.4.9.1 permissions-debuginfo-20181116-lp151.4.9.1 permissions-debugsource-20181116-lp151.4.9.1 - openSUSE Leap 15.1 (noarch): permissions-zypp-plugin-20181116-lp151.4.9.1 References: https://www.suse.com/security/cve/CVE-2019-3688.html https://www.suse.com/security/cve/CVE-2019-3690.html https://bugzilla.suse.com/1093414 https://bugzilla.suse.com/1150734 https://bugzilla.suse.com/1157198 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2667-1: moderate: Security update for shadowsocks-libev
by opensuse-security＠opensuse.org 11 Dec '19

11 Dec '19

openSUSE Security Update: Security update for shadowsocks-libev ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2667-1 Rating: moderate References: #1158251 #1158365 Cross-References: CVE-2019-5163 CVE-2019-5164 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for shadowsocks-libev fixes the following issues: - Update version to 3.3.3 * Refine the handling of suspicious connections. * Fix exploitable denial-of-service vulnerability exists in the UDPRelay functionality (boo#1158251, CVE-2019-5163) * Fix code execution vulnerability in the ss-manager binary (boo#1158365, CVE-2019-5164) * Refine the handling of fragment request. * Fix a high CPU bug introduced in 3.3.0. (#2449) * Enlarge the socket buffer size to 16KB. * Fix the empty list bug in ss-manager. * Fix the IPv6 address parser. * Fix a bug of port parser. * Fix a crash with MinGW. * Refine SIP003 plugin interface. * Remove connection timeout from all clients. * Fix the alignment bug again. * Fix a bug on 32-bit arch. * Add TCP fast open support to ss-tunnel by @PantherJohn. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2667=1 Package List: - openSUSE Leap 15.1 (x86_64): libshadowsocks-libev2-3.3.3-lp151.2.3.1 libshadowsocks-libev2-debuginfo-3.3.3-lp151.2.3.1 shadowsocks-libev-3.3.3-lp151.2.3.1 shadowsocks-libev-debuginfo-3.3.3-lp151.2.3.1 shadowsocks-libev-debugsource-3.3.3-lp151.2.3.1 shadowsocks-libev-devel-3.3.3-lp151.2.3.1 - openSUSE Leap 15.1 (noarch): shadowsocks-libev-doc-3.3.3-lp151.2.3.1 References: https://www.suse.com/security/cve/CVE-2019-5163.html https://www.suse.com/security/cve/CVE-2019-5164.html https://bugzilla.suse.com/1158251 https://bugzilla.suse.com/1158365 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2664-1: important: Security update for opera
by opensuse-security＠opensuse.org 10 Dec '19

10 Dec '19

openSUSE Security Update: Security update for opera ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2664-1 Rating: important References: Cross-References: CVE-2019-13720 CVE-2019-13721 Affected Products: openSUSE Leap 15.1:NonFree ______________________________________________________________________________ An update that fixes two vulnerabilities is now available. Description: This update for opera fixes the following issues: Opera was updated to version 65.0.3467.62 - CHR-7658 Update chromium on desktop-stable-78-3467 to 78.0.3904.108 - DNA-81387 Remove support for old bundle structure in signing scripts - DNA-81675 Update widevine signature localisation in signed packages - DNA-81884 [Advanced content blocking] Ads are blocked for whitelisted page in Incognito - DNA-82230 [Mac] URL is not correctly aligned when the Geolocation is ON - DNA-82368 Generating diffs for unsinged packages doesn’t work - DNA-82414 Wrong number of trackers displayed just after deactivating adblocker - DNA-82470 [Linux] Snap package doesn’t recognise GNOME 3.24 platform snap connection - DNA-82473 https://www.nba.com/standings not working with AdBlocker enabled - DNA-82484 Update content blocking icon - DNA-82485 [Mac 10.15] Opera installer error at the end of installation process - DNA-82508 [Adblocker] Predefault lists can not be unchecked - DNA-82557 Address bar dropdown launches HTTP GETs for every autocomplete - DNA-82596 Do not block first-party ‘trackers’ - DNA-82616 Settings – Tracker Blocker – Add “Learn more” link - DNA-82626 [Win] High CPU usage due to media indicator animation - DNA-82647 Tab icons mixed after Tab closing - DNA-82742 Pages won’t load after closing private mode - DNA-82768 Mark also the reference group in “exp” header for DNA-81658 - DNA-82840 Disable favicon fetching for typed URLs Complete Opera 65.0 changelog at: https://blogs.opera.com/desktop/changelog-for-65/ Update to version 64.0.3417.92 - DNA-81358 Wrong key color on extension popup in dark mode - DNA-82208 Cherry-pick CVE-2019-13721 and CVE-2019-13720 Update to version 64.0.3417.83 - DNA-79676 Use FFmpegDemuxer to demux ADTS - DNA-81010 Spinner takes a lot of cpu - DNA-81385 Keys on some popups in dark mode can’t be hovered - DNA-81494 [Mac] Snap onboarding doesn’t appear while the icon still flashes - DNA-82003 Restore legacy path for AudioFileReader - DNA-82019 Enable #ffmpeg-demuxer-everywhere by default in developer - DNA-82028 Enable #ffmpeg-demuxer-everywhere by default in stable on macOS Update to version 64.0.3417.73 - CHR-7598 Update chromium on desktop-stable-77-3417 to 77.0.3865.120 - DNA-80049 The upper border of “Add to bookmarks bar” popup is cut off in white mode - DNA-80395 Menu popup borders in Settings are invisible in Dark mode - DNA-81263 Change the continue section buttons visibility as in description - DNA-81304 Crash at chrome::NewTab(Browser*) - DNA-81650 Easy Setup Style looks weird - DNA-81708 Missing dependency on //chrome/common:buildflags - DNA-81732 [Mac][Catalina] Cannot maximize a window after it’s been minimized - DNA-81737 Renderer crash on https://codesandbox.io/s/vanilla-ts - DNA-81753 Pinned tab only remembered after next restart - DNA-81769 Investigate reports about slow speed dial loading in O64 blog comments - DNA-81859 [Mac 10.15] Crash whenever navigating to any page - DNA-81893 Get Personalised news on SpeedDials broken layout Update to version 64.0.3417.61 - DNA-80760 Sidebar Messenger icon update - DNA-81165 Remove sharing service - DNA-81211 [Advanced content blocking] Can not turn off ad blocking in private mode - DNA-81323 content_filter::RendererConfigProvider destroyed on wrong sequence - DNA-81487 [VPN disclaimer][da, ta] Text should be multiline - DNA-81545 opr-session entry for Google ads not working - DNA-81580 Speed dials’ colours change after Opera update - DNA-81597 [Adblocker] Google Ads link hides if clicking - DNA-81639 Widevine verification status is PLATFORM_TAMPERED - DNA-81237 [Advanced content blocking] noCoinis not enabled by default - DNA-81375 Adblocking_AddToWhitelist_Popup and Adblocking_RemoveFromWhitelist_Popup metric not recorded in stats - DNA-81413 Error in console when Start Page connects to My Flow - DNA-81435 Adjust VPN disclaimer to longer strings [de] Update to version 64.0.3417.47 - DNA-80531 [Reborn3] Unify Switches - DNA-80738 “How to protect my privacy” link - DNA-81162 Enable #advanced-content-blocking on developer stream - DNA-81202 Privacy Protection popup doesn’t resize after enabling blockers - DNA-81230 [Mac] Drop support for 10.10 - DNA-81280 Adjust button width to the shorter string - DNA-81295 Opera 64 translations - DNA-81346 Enable #advanced-content-blocking on all streams - DNA-81434 Turn on #new-vpn-flow in all streams - DNA-81436 Import translations from Chromium to O64 - DNA-81460 Promote O64 to stable - DNA-81461 Snap onboarding is cut - DNA-81467 Integrate missing translations (Chinese, MS and TL) to O64/65 - DNA-81489 Start page goes into infinite loop Complete Opera 64.0 changelog at: https://blogs.opera.com/desktop/changelog-for-64/ Update to version 63.0.3368.94 - CHR-7516 Update chromium on master to 78.0.3887.7 - DNA-80966 [Linux] Integrate a new key into our packages Update to version 63.0.3368.88 - DNA-79103 Saving link to bookmarks saves it to Other bookmarks folder - DNA-79455 Crash at views::MenuController:: FindNextSelectableMenuItem(views::MenuItemView*, int, views:: MenuController::SelectionIncrementDirectionType, bool) - DNA-79579 Continuous packages using new_mac_bundle_structure do not run - DNA-79611 Update opauto_paths.py:GetResourcesDir - DNA-79621 Add support for new bundle structure to old autoupdate clients - DNA-79906 Fix package build - DNA-80131 Sign Opera Helper(GPU).app - DNA-80191 Fix opera_components/tracking_data/tracking_data_paths.cc - DNA-80638 Cherry-pick fix for CreditCardTest. UpdateFromImportedCard_ExpiredVerifiedCardUpdatedWithSameName - DNA-80801 Very slow tab deletion process Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1:NonFree: zypper in -t patch openSUSE-2019-2664=1 Package List: - openSUSE Leap 15.1:NonFree (x86_64): opera-65.0.3467.62-lp151.2.9.1 References: https://www.suse.com/security/cve/CVE-2019-13720.html https://www.suse.com/security/cve/CVE-2019-13721.html -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2654-1: moderate: Security update for calamares
by opensuse-security＠opensuse.org 09 Dec '19

09 Dec '19

openSUSE Security Update: Security update for calamares ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2654-1 Rating: moderate References: #1140256 #1152377 Cross-References: CVE-2019-13178 Affected Products: openSUSE Backports SLE-15 ______________________________________________________________________________ An update that solves one vulnerability and has one errata is now available. Description: This update for calamares fixes the following issues: - Launch with "pkexec calamares" in openSUSE Tumbleweed, but launch with "xdg-su -c calamares" in openSUSE Leap 15. Update to Calamares 3.2.15: - "displaymanager" module now treats "sysconfig" as a regular entry in the "displaymanagers" list, and the "sysconfigSetup" key is used as a shorthand to force only that entry in the list. - "machineid" module has been re-written in C++ and extended with a new configuration key to generate urandom pool data. - "unpackfs" now supports a special "sourcefs" value of file for copying single files (optionally with renaming) or directory trees to the target system. - "unpackfs" now support an "exclude" and "excludeFile" setting for excluding particular files or patters from unpacking. Update to Calamares 3.2.14: - "locale" module no longer recognizes the legacy GeoIP configuration. This has been deprecated since Calamares 3.2.8 and is now removed. - "packagechooser" module can now be custom-labeled in the overall progress (left-hand column). - "displaymanager" module now recognizes KDE Plasma 5.17. - "displaymanager" module now can handle Wayland sessions and can detect sessions from their .desktop files. - "unpackfs" now has special handling for sourcefs setting “file”. Update to Calamares 3.2.13. More about upstream changes: https://calamares.io/calamares-3.2.13-is-out/ and https://calamares.io/calamares-3.2.12-is-out/ Update to Calamares 3.2.11: - Fix race condition in modules/luksbootkeyfile/main.py (boo#1140256, CVE-2019-13178) - more about upstream changes in 3.2 versions can be found in https://calamares.io/ and https://github.com/calamares/calamares/releases This update was imported from the openSUSE:Leap:15.0:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2019-2654=1 Package List: - openSUSE Backports SLE-15 (noarch): calamares-branding-upstream-3.2.15-bp150.2.6.1 - openSUSE Backports SLE-15 (x86_64): calamares-3.2.15-bp150.2.6.1 calamares-webview-3.2.15-bp150.2.6.1 References: https://www.suse.com/security/cve/CVE-2019-13178.html https://bugzilla.suse.com/1140256 https://bugzilla.suse.com/1152377 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2655-1: moderate: Security update for calamares
by opensuse-security＠opensuse.org 09 Dec '19

09 Dec '19

openSUSE Security Update: Security update for calamares ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2655-1 Rating: moderate References: #1140256 #1152377 Cross-References: CVE-2019-13178 Affected Products: openSUSE Backports SLE-15-SP1 ______________________________________________________________________________ An update that solves one vulnerability and has one errata is now available. Description: This update for calamares fixes the following issues: - Launch with "pkexec calamares" in openSUSE Tumbleweed, but launch with "xdg-su -c calamares" in openSUSE Leap 15. Update to Calamares 3.2.15: - "displaymanager" module now treats "sysconfig" as a regular entry in the "displaymanagers" list, and the "sysconfigSetup" key is used as a shorthand to force only that entry in the list. - "machineid" module has been re-written in C++ and extended with a new configuration key to generate urandom pool data. - "unpackfs" now supports a special "sourcefs" value of file for copying single files (optionally with renaming) or directory trees to the target system. - "unpackfs" now support an "exclude" and "excludeFile" setting for excluding particular files or patters from unpacking. Update to Calamares 3.2.14: - "locale" module no longer recognizes the legacy GeoIP configuration. This has been deprecated since Calamares 3.2.8 and is now removed. - "packagechooser" module can now be custom-labeled in the overall progress (left-hand column). - "displaymanager" module now recognizes KDE Plasma 5.17. - "displaymanager" module now can handle Wayland sessions and can detect sessions from their .desktop files. - "unpackfs" now has special handling for sourcefs setting “file”. Update to Calamares 3.2.13. More about upstream changes: https://calamares.io/calamares-3.2.13-is-out/ and https://calamares.io/calamares-3.2.12-is-out/ Update to Calamares 3.2.11: - Fix race condition in modules/luksbootkeyfile/main.py (boo#1140256, CVE-2019-13178) - more about upstream changes in 3.2 versions can be found in https://calamares.io/ and https://github.com/calamares/calamares/releases This update was imported from the openSUSE:Leap:15.1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2019-2655=1 Package List: - openSUSE Backports SLE-15-SP1 (aarch64 x86_64): calamares-3.2.15-bp151.4.3.1 calamares-webview-3.2.15-bp151.4.3.1 - openSUSE Backports SLE-15-SP1 (noarch): calamares-branding-upstream-3.2.15-bp151.4.3.1 References: https://www.suse.com/security/cve/CVE-2019-13178.html https://bugzilla.suse.com/1140256 https://bugzilla.suse.com/1152377 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2645-1: important: Security update for haproxy
by opensuse-security＠opensuse.org 04 Dec '19

04 Dec '19

openSUSE Security Update: Security update for haproxy ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2645-1 Rating: important References: #1082318 #1154980 #1157712 #1157714 Cross-References: CVE-2019-18277 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves one vulnerability and has three fixes is now available. Description: This update for haproxy to version 2.0.10 fixes the following issues: HAProxy was updated to 2.0.10 Security issues fixed: - CVE-2019-18277: Fixed a potential HTTP smuggling in messages with transfer-encoding header missing the "chunked" (bsc#1154980). - Fixed an improper handling of headers which could have led to injecting LFs in H2-to-H1 transfers creating new attack space (bsc#1157712) - Fixed an issue where HEADER frames in idle streams are not rejected and thus trying to decode them HAPrpxy crashes (bsc#1157714). Other issue addressed: - Macro change in the spec file (bsc#1082318) More information regarding the release at: http://git.haproxy.org/?p=haproxy-2.0.git;a=commit;h=ac198b92d461515551b95d aae20954b3053ce87e This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2645=1 Package List: - openSUSE Leap 15.1 (x86_64): haproxy-2.0.10+git0.ac198b92-lp151.2.6.1 haproxy-debuginfo-2.0.10+git0.ac198b92-lp151.2.6.1 haproxy-debugsource-2.0.10+git0.ac198b92-lp151.2.6.1 References: https://www.suse.com/security/cve/CVE-2019-18277.html https://bugzilla.suse.com/1082318 https://bugzilla.suse.com/1154980 https://bugzilla.suse.com/1157712 https://bugzilla.suse.com/1157714 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2019:2633-1: moderate: Security update for cloud-init
by opensuse-security＠opensuse.org 04 Dec '19

04 Dec '19

openSUSE Security Update: Security update for cloud-init ______________________________________________________________________________ Announcement ID: openSUSE-SU-2019:2633-1 Rating: moderate References: #1099358 #1129124 #1136440 #1142988 #1144363 #1151488 #1154092 Cross-References: CVE-2019-0816 Affected Products: openSUSE Leap 15.1 ______________________________________________________________________________ An update that solves one vulnerability and has 6 fixes is now available. Description: This update for cloud-init to version 19.2 fixes the following issues: Security issue fixed: - CVE-2019-0816: Fixed the unnecessary extra ssh keys that were added to authorized_keys (bsc#1129124). Non-security issues fixed: - Short circuit the conditional for identifying the sysconfig renderer (bsc#1154092, bsc#1142988). - If /etc/resolv.conf is a symlink, break it. This will avoid netconfig from clobbering the changes cloud-init applied (bsc#1151488). This update was imported from the SUSE:SLE-15-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.1: zypper in -t patch openSUSE-2019-2633=1 Package List: - openSUSE Leap 15.1 (x86_64): cloud-init-19.2-lp151.2.9.1 cloud-init-config-suse-19.2-lp151.2.9.1 cloud-init-doc-19.2-lp151.2.9.1 References: https://www.suse.com/security/cve/CVE-2019-0816.html https://bugzilla.suse.com/1099358 https://bugzilla.suse.com/1129124 https://bugzilla.suse.com/1136440 https://bugzilla.suse.com/1142988 https://bugzilla.suse.com/1144363 https://bugzilla.suse.com/1151488 https://bugzilla.suse.com/1154092 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0