- openSUSE ARM

[opensuse-arm] Rebooting opensuse 12.2 on the beagleboard xm
by gary 21 Feb '13

21 Feb '13

If I request a reboot from xfce, the system does shut down, but it doesn't reboot. Does anyone else have this problem? Is there a fix? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Booting difficulty jeos on Beagleboard XM
by gary 21 Feb '13

21 Feb '13

I've run openuse for arm on a beagleboard XM few weeks ago. I used the sd card to try out another distribution. In the mean time, I bought a few more SD cards and am trying to install openuse for arm again. [The JEOS version.] The initial boot fails. I get this message: ---------- [ 272.571441] Fixing recursive fault but reboot is needed! _____________ I reboot and end up in this infinite loop. ----------- Waiting for Ethernet connection... done. EHCI timed out on TD - token=0x8008d80 Using sms0 device TFTP from server 192.168.123.1; our IP address is 192.168.123.43 Filename 'pxelinux.cfg/01-2e-50-fc-05-68-01'. Load address: 0x86000000 Loading: T T EHCI timed out on TD - token=0x88008d80 T EHCI timed out on TD - token=0x88008d80 T T T EHCI timed out on TD - token=0x88008d80 T T EHCI timed out on TD - token=0x88008d80 T T Retry count exceeded; starting again ------------------- I have formatted the SDHC card prior to writing the new image. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] How to setup audio on Pandaboard ES
by endym 20 Feb '13

20 Feb '13

Hi all, how do I setup audio on the Pandaboard ES? The command alsaconf (and yast too) does not found any soundcard. Regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] FOSDEM feedback
by Guillaume Gardet 19 Feb '13

19 Feb '13

Hi, some of you guys where at FOSDEM and some have made talks (Alexander, Andrew, maybe more?). It would be nice to have some feedbacks, especially from an ARM point of view. ;) Some videos are available on FOSDEM website but not the ARM ones ATM. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] no TUN in kernel?
by Ciaran Farrell 18 Feb '13

18 Feb '13

I just tried to use openvpn on the CuBox. I got this error in /var/log/messages: Note: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2) Looks as if there was no support for TUN so I checked: linux:/etc/openvpn # modprobe tun FATAL: Module tun not found Does this mean that the kernel was compiled without TUN or is something else going wrong? Ciaran -- Ciaran Farrell, Attorney at Law SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nuremberg, DE GF: Jeff Hawn, Jennifer Guild, Felix Imendoerffer, HRB 16746 (AG Nuremberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Chromebook kernel configs
by Andrew Wafaa 15 Feb '13

15 Feb '13

Aloha all, I'm trying to build and package a new kernel for the Chromebook based on 3.8-rc4. I've managed to create a default config (with virt extensions enabled) and build a kernel natively, but when I did a diff of that default config and the config we use for the 3.4 kernel I noticed quite a few items missing. So I then changed the config and tried rebuilding, problem is that new config fails to build when it tries to build the Mali modules I think, I've attached the three configs in question and was wondering if someone more kernel config aware could advise on what I've done wrong - other than trying to build a new kernel :) chromebook-3.4 is the current working config chromebook-3.8-rc4 is the default auto generated config with virt extensions enabled chromebook-3.8-rc4_merge is the tweaked 3.8 config Thanks, Andy -- Andrew Wafaa IRC: FunkyPenguin GPG: 0x3A36312F

1 0

[opensuse-arm] Potential GSOC projects
by Andrew Wafaa 13 Feb '13

13 Feb '13

Hi all, Google's Summer of Code is starting again, and I was wondering if anyone had any thoughts on potential projects relating to ARM? It would be great if openSUSE was accepted again, and having a few ARM projects would be even better. Any and all ideas are welcome, but preferably potential projects that could help openSUSE as well as the wider world. Regards, Andy -- Andrew Wafaa IRC: FunkyPenguin GPG: 0x3A36312F -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Beagleboard xM Factory image tests
by Guillaume Gardet 06 Feb '13

06 Feb '13

Hi, here are my tests about latest factory image for beagle (kernel 3.7.2-3-omap2plus). At boot I get lots of this error message: systemd-udevd[1307]: failed to execute '/usr/lib/udev/socket:/org/kernel/dm/multipath_event' 'socket:/org/kernel/dm/multipath_event': No such file or directory And also this one once: systemd[1]: Cannot add dependency job for unit xdm.service, ignoring: Unit xdm.service failed to load: No such file or directory. See system logs and 'systemctl status xdm.service' for details. Audio: ok but I installed alsa tools and configured sound using: wget http://guillaume.gardet.free.fr/openSUSE/beagleboard-alsa.conf alsactl -f beagleboard-alsa.conf restore Maybe we could add it in OBS? (I will try something later). CPU: bogomips are 175.65/467.41 instead of 262.08/700.57 DSP: ok but still need some modprobe. I guess it may be done in OBS using /etc/modprobe.d/. (I will try it later). Ethernet: ok SD/MMC: ok UART: ok USB: ok DVI: NO output whereas omapdrm module is loaded. "dmesg | grep drm" returns: [ 15.567138] [drm] Initialized drm 1.1.0 20060810 [ 15.776214] omapdrm: module is from the staging directory, the quality is unknown, you have been warned. [ 16.004364] omapdrm omapdrm.0: DMM not available, disable DMM support [ 16.011444] omapdrm omapdrm.0: dvi has no driver.. skipping it [ 16.023498] [drm] Cannot find any crtc or sizes - going 1024x768 [ 16.254211] fb0: omapdrm frame buffer device [ 16.258789] drm: registered panic notifier [ 16.263244] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 16.270294] [drm] No driver support for vblank timestamp query. [ 16.276611] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 yast2-firstboot not loaded on firstboot whereas config.sh has: #====================================== # Trigger yast2-firstboot on first boot #-------------------------------------- touch /var/lib/YaST2/reconfig_system If I touch it manually and then reboot, nothing is done either. Once rebooted, I have some problem with serial console. Some key pressed are not shown and I get the following message: stty: standard input: unable to perform all requested operations Another reboot (from ssh) and the problem seems to be gone. Very strange. We may also add the following packages to JeOS: * alsa tools (said earlier in this mail) * command-not-found (but it requires some python packages :( ) * wget (usefull to download things from cmd line) Oh, and heartbeat led does not blink anymore. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Alternative ARMv8 simulator
by Dirk Müller 04 Feb '13

04 Feb '13

Hi, it seems there is also an alternative simulator available for simulating ARMv8: http://www.cavium.com/thundersdk_access_application.html Reportedly it is (perhaps only a fraction?) faster than the ARM Foundation model. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] AArch64 RPM tools available
by Guillaume Gardet 04 Feb '13

04 Feb '13

Hi, I just pushed rpm tools to our bootstrap rootfs (and RPMS folder). I tested it and rpmbuild is working! :) Only problem I had is our /bin/sh which does not understand the 'function' keyword. (See my previous mail) I will update it because it uses lib folder instead of lib64 but you can already update your rootfs to build and install RPM since I added /usr/lib to /etc/ld.so.conf and ran ldconfig. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2