July 2018 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] cubox-i / leap 42.3: problems with automatic module loading after upgrade
by Miklos Vajna 13 Apr '19

13 Apr '19

Hi, Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc. After booting and waiting for a while, dmesg starts to complain about driver detection did not finish in time (sadly I don't have the backtrace at hand, it already went out of the buffer of the serial console). For now I worked around the problem this way: - download the repo-oss (ie. non-update) kernel-default-4.4.76 rpm on an other machine, copied it to an usb stick - install the old kernel-default from the usb stick - copy the /boot from the root fs to the usb stick - use the other machine to update the /boot on the mmcblk device where u-boot reads it So is this only me or do other cubox-i users see the same? Thanks, Miklos

2 3

[opensuse-arm] How to debug Grub config
by Matwey V. Kornilov 03 Oct '18

03 Oct '18

Hello, I am (stilL) trying to boot openSUSE on Rock64. I use JeOS image from Contrib:Rockchip and manually built bootloader (with 0001-XXX-openSUSE-XXX-Prepend-partition-.patch). And currently I see the following new issue: mmc1 is current device Scanning mmc 1:2... 52462 bytes read in 43 ms (1.2 MiB/s) Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Scanning mmc 1:1... Found EFI removable media binary efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi 1247744 bytes read in 58 ms (20.5 MiB/s) ## Starting EFI application at 02000000 ... Card did not respond to voltage select! mmc_init: -95, time 10 Scanning disk rksdmmc(a)ff520000.blk... Scanning disk rksdmmc(a)ff500000.blk... Found 2 disks Welcome to GRUB! ethernet@ff540000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Could not initialize PHY ethernet@ff540000 GNU GRUB version 2.02 Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. grub> I see that both dtb file and EFI GRUB executable are loaded. But instead of GRUB menu I see GRUB command line. I suppose it means that grub failed to fetch GRUB configuration. How could I debug further what is wrong? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 10

[opensuse-arm] How to get openSUSE aarch64 on a RPi3B+?
by Sten Bert 17 Aug '18

17 Aug '18

I'm referring to: https://en.opensuse.org/HCL:Raspberry_Pi3 -> "USB key installation method" -> 2. Copy the firmware and bootloader ... u-boot.bin ========== Leap 42.3: works http://download.opensuse.org/ports/aarch64/distribution/leap/42.3/repo/oss/… TW: won't boot - rainbow screen (see release date!) http://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/aarch64/u-bo… Leap 15.0: won't boot - rainbow screen! http://download.opensuse.org/ports/aarch64/distribution/leap/15.0/repo/oss/… raspberrypi-firmware: ===================== Leap 42.3: too old https://opensuse.pkgs.org/42.3/opensuse-oss/raspberrypi-firmware-2016.09.02… TW: dead link! https://opensuse.pkgs.org/tumbleweed/opensuse-oss/raspberrypi-firmware-2018… Leap 15.0: the only choice https://opensuse.pkgs.org/15.0/opensuse-oss/raspberrypi-firmware-2018.03.13… Was happy to see agraf's changelog from 2018-03-14: - Update to 3347884 (2018-03-13) - Add support for new RPi3 B+ (bsc#1085262) So we have a mess with u-boot.bin (=Leap 42.3) and raspberrypi-firmware (=Leap 15.0), that enables the sd-card starting on a RPi3 B+! How to continue? Download the Leap 42.3 ISO (or the Tumbleweed ISO, or the Leap 15.0 ISO)? All installations made with kernel command line "modprobe.blacklist=vc4", as recommended. Started with TW ISO on USB key: openSUSE-Tumbleweed-DVD-aarch64-Snapshot20180622.iso - Installation starts, left me with a black background and a white mouse-cursor when switching to graphical part. Leap 15.0: openSUSE-Leap-15.0-DVD-aarch64-Build124.1.iso - dto. Leap 42.3: - openSUSE-Leap-42.3-DVD-aarch64-Build0200-Media.iso Installation process starts, but wants to prepare the USB key (itself) for installation instead of mmcblk0 (sd card). Trying to adapt the partition scheme from USB0 -> mmc with expert setting fails (system hanging)! How to go on? Any help appreciated! THX in advance. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

10 35

[opensuse-arm] Fwd: Updates for Leap Ports
by Axel Braun 31 Jul '18

31 Jul '18

Maybe someone in this group knows the answer? ---------- Weitergeleitete Nachricht ---------- Betreff: Updates for Leap Ports Datum: Dienstag, 24. Juli 2018, 20:19:46 CEST Von: Axel Braun <axel.braun(a)gmx.de> An: opensuse-factory(a)opensuse.org Good evening, quick question - once an update is accepted to Leap 15 Maintenance, when and how is this pushed to openSUSE-Ports-Leap-15-Update Repo? Thanks Axel ------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] openSUSE Leap 15.0 Ports
by Alexander Bergmann 27 Jul '18

27 Jul '18

Hi, I just noticed that we do not have 'openSUSE Leap 15.0 Ports' available inside OBS. Are there any afforts already to make the Ports available for 15.0? Cheers, Alex~ -- Alexander Bergmann <abergmann(a)suse.com>, Security Engineer, GPG:9FFA4886 SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg)

3 4

[opensuse-arm] Helios4
by Paul Gonin 26 Jul '18

26 Jul '18

Hi, This arm based NAS kit is interesting. https://kobol.io/helios4/ What would be the level of difficulty to have openSUSE (pref. Leap) available for it ? thanks Paul -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Z-turn Lite
by Matwey V. Kornilov 25 Jul '18

25 Jul '18

Hi, Does anybody tried Z-turn Lite board with combined CPU/FPGA SoC? It seems to be the most inexpensive model based on Xilinx Zynq SoC. http://www.myirtech.com/list.asp?id=565 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] Rock64 - anyone using one
by Steve Moring 25 Jul '18

25 Jul '18

Has anyone been using a rock64, interested in your thoughts. Can you run the opensuse arm distribution on it? Do you have to do anything special to get the hdmi 2.0 port to fully exploit uhd? -Steve -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] openSUSE get full GPU performance ?
by Xavier Primer 24 Jul '18

24 Jul '18

Hi , I'm newbie in openSUSE .. I'm running openSUSE on Raspberry Pi 3 machine. openSUSE on Raspberry Pi 3 get full GPU performance/capabilities ? Thanks, see you. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[SOLVED] Re: [opensuse-arm] resize the swap partition
by Xavier Primer 24 Jul '18

24 Jul '18

> Op dinsdag 24 juli 2018 15:01:10 CEST schreef Xavier Primer: > >> Hi, >> >> I'm newbie in openSUSE ... >> >> I'm running openSUSE on Raspberry Pi 3 machine. >> >> How can I resize the swap partition ? >> >> Thanks, see you. > > > I use next to the swap partition on the RPi3 a swap file. > You create the file using: > > fallocate --length ?MiB /var/swapfile > > /var/swapfile can be any path to a file, replace ? with the required size. > I > use 512. > Initialize the file using > > mkswap /var/swapfile > > If you need the swap space occasionally you can can use: > > swapon /var/swapfile > > otherwise make an entry in /etc/fstab like: > > /var/swapfile none swap sw 0 0 > > mount -a > > will mount the swapfile right after creation, otherwise it will be made > available in the boot process. > > You can inspect the swap space using: > > swapon --bytes > > -- > fr.gr. > > member openSUSE > Freek de Kruijf > Hi Freek , Your idea work fine. Thanks for your explained answer. See you. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0