November 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 03 Dec '12

03 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] Re: [obs submit-request 143674] openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox: created by babelworx
by Alexander Graf 03 Dec '12

03 Dec '12

On 30.11.2012, at 14:59, Ciaran Farrell wrote: > > > home:babelworx:branches:openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox -> openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox > > > https://build.opensuse.org/request/show/143674 This version is missing the .tgz change, no? Alex > > Description: this revision boots for me > > > To REVIEW against the previous version: > osc request show --diff 143674 > > To ACCEPT the request: > osc request accept 143674 --message="reviewed ok." > > To DECLINE the request: > osc request decline 143674 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 143674 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] owncloud for ARM
by endym 02 Dec '12

02 Dec '12

Hi all, I want to use owncloud (http://www.owncloud.org) on a Pandaboard. Since "zypper se owncloud" does not found anything and the OBS does not provide an ARM version, I guess I have to install it manually, right? Best regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] Network interface not coming up at boot time on CuBox
by Ciaran Farrell 30 Nov '12

30 Nov '12

One thing I've been noticing on the CuBox is that, at each reboot, the network interface is not brought up. Strangely, the system tries to set up ethX where X increments by one at each reboot. For example, I now see the following in /var/log/boot.log: network[398]: Setting up (localfs) network interfaces: network[398]: lo network[398]: lo IP address: 127.0.0.1/8 network[398]: ..done eth4 network[398]: No configuration found for eth4 network[398]: ..unusedWaiting for mandatory devices: eth0 network[398]: 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 [...] network[398]: eth0 No interface found network[398]: ..failed The last time, eth3 was involved; before that eth2. Next time it will be eth5. In yast (network settings), there were two interfaces - eth0 and eth4 (not configured). I deleted eth0 and configured eth4 (basically just set it to dhcp rather than static). After saving, the network was back up again. Any idea what is causing this? Ciaran -- Ciaran Farrell, Attorney at Law SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, DE GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 37

[opensuse-arm] GCC 4.7, cross-*-icecream-backend and others are broken in Factory
by Guillaume Gardet 30 Nov '12

30 Nov '12

Hi, GCC 4.7, cross-*-icecream-backend and others are broken in Factory. See: https://build.opensuse.org/project/monitor?arch_armv7l=1&broken=1&defaults=… Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] New contrib images: Arndale & Chromebook
by Alexander Graf 30 Nov '12

30 Nov '12

Hi list, We now have 2 new community supported platforms: Arndale Board The Arndale board is the first widely available virtualization capable system in the ARM world. It runs on a a dual-core Samsung Exynos 5 with 1.7 Ghz (unstable, so it's throttled to 1.4Ghz and according to Linaro reports even needs to go down to 1Ghz to be stable) which is based on Cortex A15! It has KVM support, SATA, USB 3.0 and ethernet. That board is the perfect build node for OBS. Retail price is $250. http://en.opensuse.org/HCL:Arndale Samsung Chromebook The Samsung Chromebook is also based on a dual-core Exynos 5, but runs stable at 1.7Ghz. It does not have KVM enablement in the software stack yet, but that is WIP effort. However, it has a screen, keyboard and battery built in, so it's easy to carry around. It also features USB 3.0 for fast I/O. It is a full-fledged notebook and the perfect openSUSE community device, as it is a desktop that's powerful enough for every day use. Retail price is $250. http://en.opensuse.org/HCL:ARMChromebook Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Re: [obs submit-request 143623] openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox: created by babelworx
by Alexander Graf 30 Nov '12

30 Nov '12

On 29.11.2012, at 22:27, Ciaran Farrell wrote: > > > home:babelworx:branches:openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox -> openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox > > > https://build.opensuse.org/request/show/143623 > > Description: change to Image.kiwi.in changing console from 115200n8 to 115200 for some reason fixed booting issue Please execute pre_checkin.sh on this directory and resubmit :) Alex > > > To REVIEW against the previous version: > osc request show --diff 143623 > > To ACCEPT the request: > osc request accept 143623 --message="reviewed ok." > > To DECLINE the request: > osc request decline 143623 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 143623 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] 12.2 release on Pandaboard ES - How to finish first startup?
by Thomas Mattke 29 Nov '12

29 Nov '12

Hi, I try to run the 12.2 release (http://download.opensuse.org/ports/armv7hl/distribution/12.2-untested/appli…) on a Pandaboard ES, but I can't finish the first startup. On the debug console I get following output (with CuteCom on KDE): http://paste.opensuse.org/b4bcc042 At the end of the output YaST2 is started automatically and until then the output is hard to read. It looks like a language selection dialog... When I start the Pandaboard with a HDMI connection to a TV I see two penguins and after a while a black screen. I can switch to text consoles with CTRL+Fx, but there is only a blinking cursor (underline symbol) at the upper left corner. Any help would be appreciated! Best regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Re: [obs submit-request 141568] openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox: created by babelworx
by Alexander Graf 28 Nov '12

28 Nov '12

On 16.11.2012, at 15:56, Ciaran Farrell wrote: > > > home:babelworx:branches:openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox -> openSUSE:12.2:ARM:Contrib:Cubox/JeOS-cubox > > https://build.opensuse.org/request/diff/141568 > > Description: Get CuBox working w/o manual uboot intervention > @@ -3,19 +3,39 @@ > set -x > > file=boot/boot.script > +echo 'resetenv' >> $file > +echo 'setenv kerneladdr 0x2000000' >> $file > +echo 'setenv ramdiskaddr 0x3000000' >> $file > +echo 'ext2load mmc 0:1 0x2000000 boot/linux.vmx' >> $file > +echo 'ext2load mmc 0:1 0x3000000 boot/initrd.uboot' >> $file > +echo -n 'setenv bootargs "' >> $file > +echo 'console=ttyS0,115200 root=/dev/mmcblk0p2"' >> $file > +echo 'bootm 0x2000000 0x3000000' >> $file > +echo 'boot' >> $file Mind to explain why exactly you need this? Is $arcNumber not set up correctly on your local NVRAM? Also, this still breaks after your first reboot, because the boot script gets regenerated on first boot. Furthermore, this change only gets 12.2 working for you, but still fails on Factory. We should certainly find out why it doesn't work for you and get a generic solution up and rolling, so that Factory works too :). Alex > > -echo 'printenv kerneladdr || setenv kerneladdr ${kernel_addr_r}' >> $file > -echo 'printenv ramdiskaddr|| setenv ramdiskaddr ${ramdisk_addr_r}' >> $file > +#echo 'printenv kerneladdr || setenv kerneladdr ${kernel_addr_r}' >> $file > +#echo 'printenv ramdiskaddr|| setenv ramdiskaddr ${ramdisk_addr_r}' >> $file > # CuBox Hack > -echo 'if itest 1$arcNumber == 13905; then' >> $file > -echo ' setenv kerneladdr 0x2000000' >> $file > -echo ' setenv ramdiskaddr 0x3000000' >> $file > -echo 'fi' >> $file > -echo -n 'setenv bootcmd "' >> $file > -echo -n 'ext2load mmc 0:1 ${kerneladdr} boot/linux.vmx; ' >> $file > -echo -n 'ext2load mmc 0:1 ${ramdiskaddr} boot/initrd.uboot; ' >> $file > -echo 'bootm ${kerneladdr} ${ramdiskaddr}";' >> $file > -echo 'boot' >> $file > +#echo 'if itest 1$arcNumber == 13905; then' >> $file > +#echo ' setenv kerneladdr 0x2000000' >> $file > +#echo ' setenv ramdiskaddr 0x3000000' >> $file > +#echo 'fi' >> $file > +#echo -n 'setenv bootcmd "' >> $file > +#echo -n 'ext2load mmc 0:1 ${kerneladdr} boot/linux.vmx; ' >> $file > +#echo -n 'ext2load mmc 0:1 ${ramdiskaddr} boot/initrd.uboot; ' >> $file > +#echo 'bootm ${kerneladdr} ${ramdiskaddr}";' >> $file > +#echo 'boot' >> $file > + > + > +#echo '======== Setting bootargs ========' >> $file > +#echo -n 'setenv bootargs "' >> $file > +#echo -n 'console=ttyS0,115200n8 vmalloc=384M root=/dev/mmcblk0p2 ' >> $file > +#echo 'rootdelay=2 --no-log --verbose"' >> $file > +#echo '======== Loading kernel ========' >> $file > +#echo 'ext2load mmc 0:1 0x00200000 /boot/uImage' >> $file > +#echo '======== Booting kernel ========' >> $file > +#echo 'bootm' >> $file > + > > #========================================== > # Create machine readable uboot format > > > > To REVIEW against the previous version: > osc request show --diff 141568 > > To ACCEPT the request: > osc request accept 141568 --message="reviewed ok." > > To DECLINE the request: > osc request decline 141568 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 141568 --message="retracted because ..., sorry / thx / see better version ..." > > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 15

[opensuse-arm] mini packages offered for upgrade
by Cristian Rodríguez 28 Nov '12

28 Nov '12

Hi: Apparently there is a bug in the OBS configuration for openSUSE:Factory:ARM systemd-mini and udev-mini are being offered in the public repo and zypper wants to install them b/c is there are broken dependencies and/or the project is not in sync with openSUSE:Factory. Will be cool if someone with karma can fix it. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0