June 2018 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] cubox-i / leap 42.3: problems with automatic module loading after upgrade
by Miklos Vajna 13 Apr '19

13 Apr '19

Hi, Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc. After booting and waiting for a while, dmesg starts to complain about driver detection did not finish in time (sadly I don't have the backtrace at hand, it already went out of the buffer of the serial console). For now I worked around the problem this way: - download the repo-oss (ie. non-update) kernel-default-4.4.76 rpm on an other machine, copied it to an usb stick - install the old kernel-default from the usb stick - copy the /boot from the root fs to the usb stick - use the other machine to update the /boot on the mmcblk device where u-boot reads it So is this only me or do other cubox-i users see the same? Thanks, Miklos

2 3

[opensuse-arm] UHD 4k support
by Steve Moring 19 Jul '18

19 Jul '18

Hi, I've seen a few people have UHD monitors working with their raspberry pi3's. I'm confused by a constraint that appears to be an X constraint, and that's the size of the desktop. Has anyone gotten this to work successfully using an openSUSE build? This works: #cvt -r 3840 2160 60 #xrandr --newmode "3840x2160" 533.00 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync #xrandr --addmode HDMI-1 3840x2160 This doesn't: #xrandr --output HDMI-1 --mode "3840x2160" --rate 60 --fb 4096x4096 -- panning 4096x4096 error is: xrandr: screen cannot be larger than 2048x2048 (desired size 4096x4096) How do I change the default to something larger than 2048x2048 (desired is 4096x4096)? Is there a way to change it dynamically, or do I need to do some work with xorg.conf files? -Steve -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] Tests of ARM Leap 15.0
by Guillaume Gardet 29 Jun '18

29 Jun '18

Hi, here are some results of my tests of Leap 15.0 images. * JeOS-beagle : OK. (DVI output not working on BBxM, as on Tumbleweed) * JeOS-beaglebone: OK on BB Black. HDMI not tested. * XFCE-raspberrypi2: OK * XFCE-sabrelite : USB not working (fine in TW), only 1/4 of the screen is used for display (same in TW), otherwise ok. => not blocking since Ethernet is working and will allow updates. * KDE-chromebook: (not built, JeOS needs to be updated) u-boot ok, but get a black screen then, no repartition happened (same in latest TW). openQA looks fine: https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.0&bui… * Firefox problem is fixed in devel and Factory. Should be released to Leap:15.0 through updates. * Gnome terminal problem is an openQA problem (color font mismatch) If people could also share there tests, it would help to decide when we could release Leap 15.0 for ARM. :) Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

10 26

Re: Re : [opensuse-arm] Version-agnostic link to Leap images
by Alessio Adamo 28 Jun '18

28 Jun '18

Hi Guillaume, indeed for Leap it shouldn't be a pressing feature, but since the links are hardcoded in Ignition, if a new fix is required in the future, it will be necessary to go through a git pull request again. If it's not much trouble, it will be a nice feature to have. Many thanks in advance. Alessio 2018-06-28 14:01 GMT+02:00 <guillaume.gardet(a)free.fr>: > > Hi, > > For 42.3, we had symlinks for rootfs only. > > Once (really) published, version numbers should not change anymore. > Please note, that we still need to update the current version. > > Dirk, do you think we could get symlinks without version numbers included for Leap 15.0? > By the way, we should push the current version since the published version is broken for a number of boards. > > > Guillaume > > > ----- Alessio Adamo <alessio.adamo(a)gmail.com> a écrit : >> Hi guys, >> >> I own a cubox-i and I'm working to add support for Leap images to >> Ignition (a GUI to download and flash SD cards with your favorite >> distro; https://wiki.solid-run.com/doku.php?id=products:imx6:software:os:ignition) >> For maintenance reasons, a version-agnostic symlink to the latest Leap >> image would be of great help (for Tumbleweed there is already). >> Do you think it can be done in conjunction with next image publication? >> >> Kind regards >> >> Alessio >> -- >> To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org >> To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org >> > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Version-agnostic link to Leap images
by Alessio Adamo 28 Jun '18

28 Jun '18

Hi guys, I own a cubox-i and I'm working to add support for Leap images to Ignition (a GUI to download and flash SD cards with your favorite distro; https://wiki.solid-run.com/doku.php?id=products:imx6:software:os:ignition) For maintenance reasons, a version-agnostic symlink to the latest Leap image would be of great help (for Tumbleweed there is already). Do you think it can be done in conjunction with next image publication? Kind regards Alessio -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Image building
by Axel Braun 27 Jun '18

27 Jun '18

Hello, one question re. image building for Raspi: I want to enhance an existing image, pack and provide it for download. It is a bit more complicated, so kiwi-builds were not successful so far. Idea would be to copy the image with dd and compress it, or use a tool like clonezilla as alternative (although this is quite complicated for average users). Any better suggestions or proposals? Thanks Axel -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Issues with Leap 15 image LXQT
by Axel Braun 27 Jun '18

27 Jun '18

Hello, I have installed the LXQT Leap 15 image on a new Raspi, and noticed some issues with that: - there is no update repository set-up. is this by intention? - Firefox crashes with a segfault on start - chromium starts, but in default setup (as root) it can only be started from command line, as it needs an additional parameter - the File manager (fcpacman-qt) does not start: the screen flickers shortly, and nothing happens. Probably the dependecy on the base package fcpackman is not porperly set in the spec file. - for the wishlist: a simple text editor installed by default For he rest...nice! Cheers Axel -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 4

Re: [opensuse-arm] Tests of ARM Leap 15.0
by Guillaume Gardet 26 Jun '18

26 Jun '18

Hi, Le 25/06/2018 à 17:35, suse-bugz(a)bischof.org a écrit : > Hi Guillaume, > > On Mon, 25 Jun 2018, Guillaume Gardet wrote: > >> Le 22/06/2018 à 16:03, Frank Kunz a écrit : >>> Am 20.06.2018 um 08:58 schrieb Guillaume Gardet: >>> >>>>> there is also some effect for the efi part. So also other boards >>>>> might be affected by that missing path? >>>> It should not hurt here, as it will just not switch folder. But >>>> /usr/src/packages/KIWIROOT-oem/boot/u-boot-with-spl.sfp should be >>>> changed to boot/u-boot-with-spl.sfp in installation script. >>>> >>>> I will send an update for TW and Leap 15.0 to get u-boot installed >>>> properly for your board. >>>> >>>> Guillaume >>>> >>> Now it works. Thank you for your support. >> >> Great. Enjoy openSUSE on your board. :) >> >> If you have time, please add what works and what does not work for your board, on the wiki page: >> https://en.opensuse.org/openSUSE:Supported_ARM_boards#Board_Status >> There are both Leap and Tumbleweed tables. > > https://en.opensuse.org/openSUSE:Supported_ARM_boards#Board_Status > > states that Chromebooks (Samsung XE303C12) work with both Tumbleweed (image version 2018.06.14) and Leap 15. > > I probably missed something, but where are those images? > > http://download.opensuse.org/ports/armv7hl/tumbleweed/images/ > > is at 11 May (used to be 05 May until yesterday)... Yes, known problem, the source of this problem has been identified, we are working on this to get latest images published. That's explain why 2018.06.14 has not been published there yet. In the meantime, you can get the latest image from command line: osc getbinaries openSUSE:Factory:ARM:Live JeOS:JeOS-chromebook images armv7l Just replace JeOS-chromebook with XFCE-chromebook or any flavor you need. Guillaume > > > Best regards, > > --Daniel. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Is there any support for the Raspberry Pi Camera in an openSUSE image/repository?
by Freek de Kruijf 25 Jun '18

25 Jun '18

The question says it all! Is there any support for the Raspberry Pi Camera in an openSUSE image/ repository? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] opensuse.org and openSUSE ARM
by Matwey V. Kornilov 19 Jun '18

19 Jun '18

Hi all, I think it is important that there is no way to figure out that openSUSE available at ARM architecture reading site www.opensuse.org Trying to "download" Linux, I end up on https://software.opensuse.org/distributions/leap?locale=en where only x86_64 is available. In my opinion we could highlight presence of ARM port for a few best-supported SBCs (for instance, Raspberry Pi, BeagleBone, QEMU/EFI). What do you think? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 6