February 2016 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] kpartx hangs in armv6 images builds
by Guillaume Gardet 20 Feb '16

20 Feb '16

Hi, All armv6l (raspberry pi) images hang after a call to kpartx. See: https://build.opensuse.org/package/live_build_log/devel:ARM:Factory:Contrib… Local (chroot) build is ok, so I guess this is a qemu problem? Any idea how to fix that ? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

9 33

[opensuse-arm] Factory u-boot-am335x: ### ERROR ### Please RESET the board ###
by Matwey V. Kornilov 17 Feb '16

17 Feb '16

Hello, I am trying to boot from openSUSE-Tumbleweed-ARM-JeOS-beaglebone.armv7l-1.12.1-Build375.1.raw and I see the following: U-Boot SPL 2016.01 (Feb 09 2016 - 16:10:32) Trying to boot from MMC bad magic bad magic SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 8

[opensuse-arm] Root device not found
by Oscar C 16 Feb '16

16 Feb '16

Hi, I'm trying to boot my udoo quad board (imx6) but it fails because the root device is not found: [1454973205.868008] Searching for boot device... [1454973205.922481] Waiting for device /dev/mmcblk0p2 to settle... [1454973207.943315] Waiting for device /dev/mmcblk0p2 to settle... [1454973209.964210] Waiting for device /dev/mmcblk0p2 to settle... [1454973211.985181] Waiting for device /dev/mmcblk0p2 to settle... [1454973214.005732] Waiting for device /dev/mmcblk0p2 to settle... [1454973216.026237] Waiting for device /dev/mmcblk0p2 to settle... [1454973218.047048] Waiting for device /dev/mmcblk0p2 to settle... [1454973220.067520] Waiting for device /dev/mmcblk0p2 to settle... [1454973266.552193] Specified root device /dev/mmcblk0p2 not found. Found devices: [1454973267.286059] root device not found... fatal ! Looking at the full log I see that the problem may be that the mmc module is not loaded. I unpacked the initram and there are some modules, but I don't know which one is for the imx6 platform: mmc/card: total 80 -rw-r--r-- 1 oscar users 51882 feb 10 00:31 mmc_block.ko -rw-r--r-- 1 oscar users 25090 feb 10 00:31 sdio_uart.ko mmc/core: total 192 -rw-r--r-- 1 oscar users 195402 feb 10 00:31 mmc_core.ko mmc/host: total 848 -rw-r--r-- 1 oscar users 13766 feb 10 00:31 dw_mmc-exynos.ko -rw-r--r-- 1 oscar users 10746 feb 10 00:31 dw_mmc-k3.ko -rw-r--r-- 1 oscar users 47662 feb 10 00:31 dw_mmc.ko -rw-r--r-- 1 oscar users 9662 feb 10 00:31 dw_mmc-pltfm.ko -rw-r--r-- 1 oscar users 12670 feb 10 00:31 dw_mmc-rockchip.ko -rw-r--r-- 1 oscar users 31746 feb 10 00:31 mmci.ko -rw-r--r-- 1 oscar users 4338 feb 10 00:31 mmci_qcom_dml.ko -rw-r--r-- 1 oscar users 32278 feb 10 00:31 mtk-sd.ko -rw-r--r-- 1 oscar users 23894 feb 10 00:31 mvsdio.ko -rw-r--r-- 1 oscar users 25982 feb 10 00:31 mxcmmc.ko -rw-r--r-- 1 oscar users 41634 feb 10 00:31 omap_hsmmc.ko -rw-r--r-- 1 oscar users 29522 feb 10 00:31 omap.ko -rw-r--r-- 1 oscar users 33522 feb 10 00:31 rtsx_usb_sdmmc.ko -rw-r--r-- 1 oscar users 13990 feb 10 00:31 sdhci-bcm-kona.ko -rw-r--r-- 1 oscar users 8046 feb 10 00:31 sdhci-dove.ko -rw-r--r-- 1 oscar users 25314 feb 10 00:31 sdhci-esdhc-imx.ko -rw-r--r-- 1 oscar users 11086 feb 10 00:31 sdhci_f_sdh30.ko -rw-r--r-- 1 oscar users 11574 feb 10 00:31 sdhci-iproc.ko -rw-r--r-- 1 oscar users 63518 feb 10 00:31 sdhci.ko -rw-r--r-- 1 oscar users 14966 feb 10 00:31 sdhci-msm.ko -rw-r--r-- 1 oscar users 10978 feb 10 00:31 sdhci-of-arasan.ko -rw-r--r-- 1 oscar users 10030 feb 10 00:31 sdhci-of-at91.ko -rw-r--r-- 1 oscar users 15682 feb 10 00:31 sdhci-of-esdhc.ko -rw-r--r-- 1 oscar users 13890 feb 10 00:31 sdhci-pltfm.ko -rw-r--r-- 1 oscar users 18354 feb 10 00:31 sdhci-s3c.ko -rw-r--r-- 1 oscar users 11770 feb 10 00:31 sdhci-spear.ko -rw-r--r-- 1 oscar users 13054 feb 10 00:31 sdhci-st.ko -rw-r--r-- 1 oscar users 11382 feb 10 00:31 sdhci-tegra.ko -rw-r--r-- 1 oscar users 35430 feb 10 00:31 sh_mmcif.ko -rw-r--r-- 1 oscar users 15674 feb 10 00:31 sh_mobile_sdhi.ko -rw-r--r-- 1 oscar users 23906 feb 10 00:31 sunxi-mmc.ko -rw-r--r-- 1 oscar users 38210 feb 10 00:31 tmio_mmc_core.ko -rw-r--r-- 1 oscar users 7730 feb 10 00:31 tmio_mmc.ko -rw-r--r-- 1 oscar users 35670 feb 10 00:31 usdhi6rol0.ko -rw-r--r-- 1 oscar users 12182 feb 10 00:31 ushc.ko -rw-r--r-- 1 oscar users 43886 feb 10 00:31 vub300.ko -rw-r--r-- 1 oscar users 18750 feb 10 00:31 wmt-sdmmc.ko Can I set a debug flag or something to see why the modules are not being loading? Thanks! -- Oscar -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 7

[opensuse-arm] New package: sunxi-tools
by Andreas Färber 15 Feb '16

15 Feb '16

Hello, In my ongoing quest to clean up our ARM packages I have submitted the sunxi-tools package from devel:ARM:Factory:Contrib:sunxi to hardware project and am proposing its inclusion in Factory. https://build.opensuse.org/request/show/359205 Among others, its tools are used for (de)compiling Allwinner script.bin files (a predecessor/alternative to FDT files) or for booting via USB. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 2

[opensuse-arm] Tumbleweed for AArch64 being converted to OpenQA publishing
by Dirk Müller 12 Feb '16

12 Feb '16

Hi, Over the last couple of months, a couple of contributors have been working on enabling openQA for aarch64, and the current state looks good enough for a start. To learn more about openQA , visit http://os-autoinst.github.io/openQA/ (there is also openqa.org which is however completely unrelated). So far, publishing and testing of Tumbleweed for ARM (aarch64) was happening completely independent. It is however better if the automated testing result is used to decide whether or not the current snapshot will be published to end users. As recently of bigger changes have entered tumbleweed (https://news.opensuse.org/2016/02/10/systemd-updates-ambitious-yast-changes…) it seems now is a good timing to switch to a tested publishing method. This means from now on openQA will test the snapshot first in a staging area, and only if it passes the defined testing criteria the snapshot will be published. So far, snapshots were published and only afterwards tested. Since publishing happened via the build service, which due to the recent upgrades is significantly bottlenecked and took several days or more, we have enough time to test the snapshot (which does not have to be published right away) and then decide on whether or not to publish the current tree without significant drawbacks. Therefore, publishing happens from now on not directly anymore but only via openQA. As the current state is failing the testing, it is actually a good thing as we'll be ironing out the issues and then have a stable snapshot (including images) published. That however also means there will likely not be a snapshot update for the next few days as we'll work out kinks and issues. Please note that armv6/v7hl is currently not covered by openQA and hence is published like before. However I started a bit on enabling testing of armv7 as well, but that will take a bit more time until we can make the switch. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Running openSUSE as lxc container on a armv6 raspberry Pi 1 B+
by Johannes Kastl 08 Feb '16

08 Feb '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, I have a raspberry 1 B+ running Raspbian, but would like to migrate an existing VM on the raspi, but running as a lxc container. Has anyone run a opensuse (13.1/13.2/Leap/TW) as an lxc container on a armv6 raspi? Anyone tried this on armv7 (raspi2)? As far as I can see the main problems with running openSUSE on raspberries seems to be booting or rather finding an image that boots correctly. So maybe running inside a container (without u-boot and dtb's and stuff) could work? Or am I naive? ;-) Johannes -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iEYEARECAAYFAla44esACgkQzi3gQ/xETbLWBQCgiMBAqr2kbMbqL5+7E+DecON5 1boAnRHeQaEIfjB8jglORdxT6UPhNZBN =cLXm -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] pihwm package relocated
by Andreas Färber 07 Feb '16

07 Feb '16

Hello, Earlier this week I moved the pihwm package from :Contrib:RaspberryPi to hardware and cleaned it up a little: https://build.opensuse.org/package/show/hardware/pihwm If the .a static library is needed for anything, please package it in a devel-static sub-package. If you want to get this submitted to Factory, please step up as maintainer and start the process: do an SR from hardware to openSUSE:Factory and write an email to opensuse-factory mailing list pointing to SR# and explaining the package (cf. raspberrypi-firmware). Why? This is a further step towards untangling generally useful userspace packages from interim downstream kernels. Effects? Current users of pihwm will need to add hardware's openSUSE_Factory_ARM repository for now; if submitted and accepted into Factory that will no longer be necessary. Users of openSUSE:Factory:ARM or other openSUSE kernels can drop the :Contrib:RaspberryPi repo. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Temporary outage
by Dirk Müller 05 Feb '16

05 Feb '16

Hi, There is a network connectivity issue to the ARMv7 Build cluster right now on OBS. It is being investigated today. Hopefully workers are back up before the weekend. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Current Pi2 image
by Chuck Payne 04 Feb '16

04 Feb '16

Guys, I was at SCaLE last week and I wanted to demo the current Pi2 image. So I followed the instruction and got the SD card load, but when I but booth up the pi, the two lights would stay on and no video. The images I was using was openSUSE-Tumbleweed-ARM-E17-raspberrypi2.armv7l.raw.xz Is that normal, I waited about 10 mins before shutting off the Pi. -- Terror PUP a.k.a Chuck "PUP" Payne ----------------------------------------- Discover it! Enjoy it! Share it! openSUSE Linux. ----------------------------------------- openSUSE -- Terrorpup openSUSE Ambassador/openSUSE Member skype,twiiter,identica,friendfeed -- terrorpup freenode(irc) --terrorpup/lupinstein Register Linux Userid: 155363 Have you tried SUSE Studio? Need to create a Live CD, an app you want to package and distribute , or create your own linux distro. Give SUSE Studio a try. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 11

[opensuse-arm] How to add u-boot-udoo package to factory
by Oscar C 01 Feb '16

01 Feb '16

Hi, Some days ago I created a SR to build u-boot for udoo boards. That SR is accepted but I cannot build the jeOS image because the package u-boot-udoo doesn't exist in factory. I have it in my own project. How do I submit it? Thanks! -- Cheers -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2