October 2015 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Factory:ARM publishing is disabled
by Oscar C 16 Oct '15

16 Oct '15

Hi, It seems that Factory publishing got disabled. Is there any problem? Thanks! -- Cheers -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] zypper dup problem
by Peter Czanik 15 Oct '15

15 Oct '15

Hi, I was trying to run "zypper dup" on my Raspberry Pi2 to have all the "recommended" packages installed. The problem is: Retrieving: libcolord-gtk1-0.1.26-1.1.armv7hl.rpm ........................[done] Retrieving package libcolorhug2-1.2.12-1.1.armv7hl (66/435), 71.7 KiB ( 66.0 KiB unpacked) Retrieving: libcolorhug2-1.2.12-1.1.armv7hl.rpm .........................[error] File './suse/armv7hl/libcolorhug2-1.2.12-1.1.armv7hl.rpm' not found on medium 'http://download.opensuse.org/ports/armv7hl/tumbleweed/repo/oss/' Abort, retry, ignore? [a/r/i/? shows all options] (a): r Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

Re: [opensuse-arm] Raspberry Pi 2
by Peter Czanik 15 Oct '15

15 Oct '15

Hi, Thanks! With the removal of raspberry-gfx now I have at least something on screen. I better take a smaller screen for the demo :) Bye, CzP On 10/14/2015 06:06 PM, Michael Emory Cerquoni wrote: > I have not been able to get GUI working correctly on the raspberry pi > 2 myself. at the blinking cursor if you hit ctrl+alt+f1 you should > get a console log in. The only way i could get video to come up was > to uninstall the raspberrypi gfx packages and let the stock mesa > packages install, once those were installed reboot and you should get > graphics but you will be stuck in 800x480 resolution. So far I have > not gotten anything better than this on my Raspberry Pi 2 Model B. > > On Wed, Oct 14, 2015 at 11:33 AM, Peter Czanik <peter(a)czanik.hu > <mailto:peter@czanik.hu>> wrote: > > On 10/14/2015 04:05 PM, Guillaume Gardet wrote: > > Hi, > > > Le 14/10/2015 16:02, Peter Czanik a écrit : > > Hi, > > I'd like to demo Raspberry Pi 2 with openSUSE at a > conference. I tried the XFCE image at > http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ras… > which I found at the RPi2 HCL page at > https://en.opensuse.org/HCL:Raspberry_Pi2 > I was prepared for a slow boot, but after 20 minutes, the > screen is still blank with the cursor blinking in the > upper left corner. > Any idea, what could have gone wrong? Any other image I > should try? > > > You could try to access it through network (SSH) or serial > port to see what is going on. > > > Just found it in the Xorg logs: > > xfce4-session: symbol lookup error: /usr/lib/libEGL.so.1: > undefined symbol: glDiscardFramebufferEXT > > Does it affect other window managers? Should I give the LXDE image > a try? > > Bye, > CzP > > -- > To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org > <mailto:opensuse-arm%2Bunsubscribe@opensuse.org> > To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org > > > > > -- > Michael Emory Cerquoni -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Raspberry Pi 2
by Peter Czanik 14 Oct '15

14 Oct '15

Hi, I'd like to demo Raspberry Pi 2 with openSUSE at a conference. I tried the XFCE image at http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ras… which I found at the RPi2 HCL page at https://en.opensuse.org/HCL:Raspberry_Pi2 I was prepared for a slow boot, but after 20 minutes, the screen is still blank with the cursor blinking in the upper left corner. Any idea, what could have gone wrong? Any other image I should try? Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] New 8250 OMAP serial driver (second try)
by Matwey V. Kornilov 07 Oct '15

07 Oct '15

Hello, Please, test an image from http://download.opensuse.org/repositories/home:/matwey:/JeOS-omap-serial/im… if you have device with OMAP UART. Now, new OMAP driver works for me on BeagleBone Black. Kernel is 4.3.0-rc3-1.gb439548-default. I am going to submit patch switching to new 8250 driver, so please test. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Re: [opensuse-kernel] Re: armv7hl kernel-default config have tegra20 serial output broken
by Misha Komarovskiy 06 Oct '15

06 Oct '15

Hello, I have no experience with kgdb. As system restarts after panic timeout i wanted to catch oops message in kernel output via serial console. --- Best Regards, Misha Komarovskiy zombahatgmaildotcom On Sat, Aug 1, 2015 at 1:46 PM, Matwey V. Kornilov <matwey.kornilov(a)gmail.com> wrote: > 01.08.2015 12:48, Misha Komarovskiy пишет: >> Hello, >> I found that latest images for my armv7 board (paz00/ac100) which use >> kernel-default have kernel panic on start without any output to serial >> console, but serial output was working last time i tested image back >> in may. >> >> I cloned kernel-source git repo made sequence-patched kernel and >> recompiled it with >> enabling DEBUG_LL,TEGRA UART_A and EARLYPRINTK config options added to >> config/armv7hl/default config, but found that there is no ttyS0 >> output, only earlycon here is paste: >> http://paste.opensuse.org/31390203 >> > > Have you tried to use kgdb? Does it not work too? > >> Recompiling same kernel with multi_v7_defconfig config and same >> debug/earlyprintk options have no panics and normal serial output: >> http://paste.opensuse.org/13080662 >> >> Maybe kernel-default config require some extra tricks now to have serial output? >> I want to catch that panic. >> --- >> Best Regards, >> Misha Komarovskiy >> zombahatgmaildotcom >> > > > -- > To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 11

[opensuse-arm] openSUSE_Factory_ARM: systemd-tmpfiles: command not found
by Michael Ströder 06 Oct '15

06 Oct '15

HI! I'm building in a local OBS branch: https://build.opensuse.org/package/show/home:stroeder:branches:server:dns/u… All builds work ok but all openSUSE_Factory_ARM builds fail with this message: /.build_patchrpmcheck_scr: line 22: systemd-tmpfiles: command not found postinstall script of unbound-1.5.5rc1-21.1.armv6hl.rpm failed Any clue? Ciao, Michael.

2 2

[opensuse-arm] Cubietruck built-in Ethernet broken with kernel 4.2
by Andreas Färber 05 Oct '15

05 Oct '15

Hi, Updating from 4.1 to 4.2 breaks the built-in Ethernet on Cubietruck, possibly Allwinner based boards as well (kernel-lpae and -default). As a workaround, a USB Ethernet adapter can restore eth0 for ssh access. Serial console output is still not working for me. A quick glance at the configs reveals # CONFIG_DWMAC_SUNXI is not set on both packages - not yet sure if related. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] armv6hl excluded for Kernel:stable?
by Stefan Bruens 05 Oct '15

05 Oct '15

Hi, since OBS revision 407 of Kernel:stable [1] no kernel is built for armv6hl (it is no longer in ExclusiveArch:). Whats the reasoning behind this? Resources should not be the issue, as kernel-docs, which is a) noarch b) a real resource hog is still built for armv6hl Kind regards, Stefan [1] https://build.opensuse.org/package/rdiff/Kernel:stable/kernel-source?linkre… -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 work: +49 2405 49936-424 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Drop 12.2 and 12.3 ARM build in X11:Enlightenment:Factory
by Tomáš Čech 01 Oct '15

01 Oct '15

Hi, is there chance that anyone would be using and requiring 12.2 and 12.3 ARM builds of X11:Enlightenment:Factory? I should either drop the support or fix it but I'd rather drop it and have just latest distro versions as build targets... Is anyone still using that? If there is noone during the week, I'll just drop it. Thanks. Tomas Cech Sleep_Walker -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2