October 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 02 Dec '12

02 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] openSUSE 12.2 RC2 Release preparation
by Dirk Müller 26 Nov '12

26 Nov '12

Hi ARM :-), Hi Jos, Alex and I have worked yesterday a few hours to finish up the last remaining bugs for a 12.2 RC2 release. we plan that this is the last RC before final 12.2 for ARM, which is scheduled for November 6th. The changes over RC1 are: * various bugfixes in the imaging * add an update repository to the images for maintenance * adding various fixes for booting machines without RTC with a reasonable system time * Adding a YaST firstboot stage for configuring the country, language, root password and creating the first user login * various smaller fixes in packaging We have also enabled support for the following SoCs' * Calxeda Highbank * CuBox * IMX 53 * Samsung Origen In addition, we added XFCE images for panda and beagle board. We know that those still have some bugs that need to be fixed for the final release. the JeOS images are good though. We've personally tested some of the variations, but not all of them. We'd like to get more feedback about it. In addition to that, we've also worked on graphics support for a few of the boards, with varying results. The Raspberry Pi image is not part of this release, it will come at a later point in time as a separate announcement. The images are available for download from: http://download.opensuse.org/ports/armv7hl/distribution/12.2-RC2/ This link is not yet up, I'm still waiting for the build service team to sign and upload the images there. This link: http://download.opensuse.org/ports/armv7hl/distribution/openSUSE-stable/ will point to RC2 once it is available so we could use that one as well. I hope that we can do the announcement on sunday evening latest, but it might slip to monday I'm afraid :( Please work on the promo bits, and fire at will once the link above (with - RC2) is working. The rest of the announcement can be reused from the RC1 announcement that Andrew did. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

7 31

[opensuse-arm] Please fix kiwi package (conflict in kiwi.changes)
by Guillaume Gardet 06 Nov '12

06 Nov '12

Hi, kiwi is broken due to an update on Virtualization:Appliances which lead to a conflict in kiwi.changes. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] 12.2 rc2 - beagle
by Guillaume Gardet 01 Nov '12

01 Nov '12

Hi, I tested quickly JeOS and XFCE beagle images on a beagleboard xM. YaST firstboot is launched, so it is very nice to have a configured board. But it is launched on the serial port and not on the DVI output. Is it configurable? I guess it is launched on the debug console? It could be nice to have it on serial for JeOS and on graphical user interface on XFCE image. Moreover, XFCE (and X) is (are) not launched automatically on boot. I needed to do a "sudo startxfce4". Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] kiwi image for Raspberry Pi (armv5)
by Guillaume Gardet 31 Oct '12

31 Oct '12

Hi, with my first pacthes for armv5 support to kiwi, I am nearly done but I have a problem with vmlinuz. I get the following error during Raspberry Pi image build: [ 1927s] mv: cannot stat 'vmlinuz-3.1.10-1.17-raspberrypi': No such file or directory Which lead to the final error: [ 1928s] Oct-31 15:43:23 <1> : Extracting kernel [ 1928s] Oct-31 15:43:23 <1> : EXEC [pwd] [ 1928s] Oct-31 15:43:24 <3> : Can't find kernel for extraction: No such file or directory It seems that the kiwi source code is: ******************************************************************************** #========================================== # create common kernel files, last wins ! #------------------------------------------ pushd /boot if [ -f uImage-$VERSION ];then mv uImage-$VERSION vmlinuz elif [ -f vmlinux-$VERSION.gz ];then mv vmlinux-$VERSION.gz vmlinux.gz mv vmlinuz-$VERSION vmlinuz elif [ -f vmlinuz-$VERSION.el5 ];then mv vmlinux-$VERSION.el5 vmlinuz elif [ -f vmlinuz-$VERSION ];then mv vmlinuz-$VERSION vmlinuz elif [ -f image-$VERSION ];then mv image-$VERSION vmlinuz else rm -f vmlinux cp vmlinux-$VERSION vmlinux mv vmlinux-$VERSION vmlinuz fi ******************************************************************************** So, "mv" should occur only when the file exist. In my case it should not stop in vmlinuz-$VERSION but in image-$VERSION. Any idea what is going on? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] Interesting ARM news
by Joop Boonen 31 Oct '12

31 Oct '12

Hi all, Some quite interesting ARM news. ARM introduces Cortex A-50 (armv8) processors http://www.arm.com/about/newsroom/arm-launches-cortex-a50-series-the-worlds… AMD will produce ARM processors for servers. http://www.amd.com/us/press-releases/Pages/press-release-2012Oct29.aspx Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] kiwi initrd and driver support
by Alexander Graf 30 Oct '12

30 Oct '12

Hi Marcus, I'm wondering how the kiwi initrd determines which drivers need to be included in the initrd. To be precise, I'm missing the drivers/mtd directory which renders the vexpress image unusable, because it doesn't contain disk drivers ;). Do you manually pick modules during the creation of the initial kiwi initrd? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Re: [obs submit-request 139668] openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100: created by worldcitizen
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:03, <joop.boonen(a)boonen.org> wrote: > > > home:worldcitizen:branches:openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 -> openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 > > > https://build.opensuse.org/request/show/139668 > > Description: testing via uboot-image-install also added all improvements suggested by agraf > > ++++++ Images.kiwi.in > --- Images.kiwi.in > +++ Images.kiwi.in > @@ -54,6 +54,10 @@ > # define BOOTKERNEL exynos > # define KERNEL_CMDLINE_STR "console=ttySAC2,115200n8" > # define EXTRA_PACKAGES PKG_BOOT_TAG(u-boot-origen) > +#elif IS_FLAVOR_ac100 > +# define BOOTKERNEL tegra-ac100 > +# define KERNEL_CMDLINE_STR "" > +# define EXTRA_PACKAGES abootimg This needs special escaping. Check out the way it's done for origen just above :) > #else > # define BOOTKERNEL default > # define KERNEL_CMDLINE_STR "" > @@ -85,8 +89,6 @@ > <preferences> > #if IS_FLAVOR_rootfs > <type image="tbz" primary="true"/> > -#elif IS_FLAVOR_ac100 > - <type image="tbz" primary="true"/> > #else > <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" > kernelcmdline=KERNEL_CMDLINE_STR > @@ -112,6 +114,11 @@ > <repository type="rpm-md"> > <source path="obs://openSUSE:12.2:ARM/standard"/> > </repository> > +#if IS_FLAVOR_ac100 > + <repository type="rpm-md"> > + <source path="obs://openSUSE:12.2:ARM:Contrib:Tegra/standard"/> > + </repository> > +#endif >  > <strip type="tools"> > <file name="qemu-arm-binfmt"/> > > ++++++ JeOS-ac100.kiwi > --- JeOS-ac100.kiwi > +++ JeOS-ac100.kiwi > @@ -17,7 +17,11 @@ > </specification> > </description> > <preferences> > - <type image="tbz" primary="true"/> > + <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" kernelcmdline="" editbootconfig="uboot-image-setup" editbootinstall="uboot-image-install"> > + <oemconfig> > + <oem-swapsize>500</oem-swapsize> > + </oemconfig> > + </type> > <version>1.12.1</version> > <packagemanager>zypper</packagemanager> > <locale>en_US</locale> > @@ -42,57 +46,56 @@ > <file name="qemu-arm-binfmt"/> > <file name="qemu-arm"/> > </strip> > - <packages type="bootstrap"> > - <package name="kernel-tegra-ac100" bootinclude="true"/> > - <package name="abootimg"/> > - <package name="aaa_base"/> > - <package name="aaa_base-extras"/> > - <package name="branding-openSUSE"/> > - <package name="cracklib-dict-full"/> > - <package name="dhcpcd"/> > - <package name="elfutils"/> > - <package name="filesystem"/> > - <package name="glibc-locale"/> > - <package name="hwinfo"/> > - <package name="ifplugd"/> > - <package name="insserv"/> > - <package name="iputils"/> > - <package name="kbd"/> > - <package name="kernel-firmware"/> > - <package name="less"/> > - <package name="lvm2"/> > - <package name="mkinitrd"/> > - <package name="module-init-tools"/> > - <package name="ncurses-utils"/> > - <package name="netcfg"/> > -  > - <package name="ntp"/> > - <package name="openssh"/> > - <package name="openSUSE-release"/> > - <package name="pkg-config"/> > - <package name="polkit"/> > - <package name="procps"/> > - <package name="pwdutils"/> > - <package name="plymouth"/> > - <package name="qemu-linux-user-arm" bootinclude="true"/> > - <package name="rpcbind"/> > - <package name="rpm"/> > - <package name="rsyslog"/> > - <package name="sysconfig"/> > - <package name="systemd-sysvinit"/> > - <package name="timezone"/> > - <package name="u-boot-tools"/> > - <package name="vim"/> > - <package name="wireless-tools"/> > - <package name="wpa_supplicant"/> > - <package name="openSUSE-build-key"/> > - <package name="yast2-firstboot"/> > -  > - <package name="yast2-users"/> > - <package name="zypper"/> > -  > - <archive name="uboot-setup.tgz" bootinclude="true"/> > - </packages> > + <packages type="bootstrap"><package name="kernel-tegra-ac100" bootinclude="true"/> > +abootimg See? Looks bogus, no? > +<package name="aaa_base"/> > +<package name="aaa_base-extras"/> > +<package name="branding-openSUSE"/> > +<package name="cracklib-dict-full"/> > +<package name="dhcpcd"/> > +<package name="elfutils"/> > +<package name="filesystem"/> > +<package name="glibc-locale"/> > +<package name="hwinfo"/> > +<package name="ifplugd"/> > +<package name="insserv"/> > +<package name="iputils"/> > +<package name="kbd"/> > +<package name="kernel-firmware"/> > +<package name="less"/> > +<package name="lvm2"/> > +<package name="mkinitrd"/> > +<package name="module-init-tools"/> > +<package name="ncurses-utils"/> > +<package name="netcfg"/> > + > +<package name="ntp"/> > +<package name="openssh"/> > +<package name="openSUSE-release"/> > +<package name="pkg-config"/> > +<package name="polkit"/> > +<package name="procps"/> > +<package name="pwdutils"/> > +<package name="plymouth"/> > +<package name="qemu-linux-user-arm" bootinclude="true"/> > +<package name="rpcbind"/> > +<package name="rpm"/> > +<package name="rsyslog"/> > +<package name="sysconfig"/> > +<package name="systemd-sysvinit"/> > +<package name="timezone"/> > +<package name="u-boot-tools"/> > +<package name="vim"/> > +<package name="wireless-tools"/> > +<package name="wpa_supplicant"/> > +<package name="openSUSE-build-key"/> > +<package name="yast2-firstboot"/> > + > +<package name="yast2-users"/> > +<package name="zypper"/> > + > + <archive name="uboot-setup.tgz" bootinclude="true"/> > + </packages> > <packages type="delete"> > <!-- not needed at runtime, but removing would happen too early > <package name="qemu-linux-user-arm" /> > > ++++++ XFCE-ac100.kiwi > --- XFCE-ac100.kiwi > +++ XFCE-ac100.kiwi > @@ -1,5 +1,5 @@ > <?xml version="1.0" encoding="utf-8"?> > -<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-ac100"> > +<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-rootfs"> Oh? What happened here? Alex > <!-- > ***************************************************************************** > ***************************************************************************** > @@ -13,7 +13,7 @@ > <author>Marcus Schäfer</author> > <contact>ms(a)novell.com</contact> > <specification> > - openSUSE 12.2 XFCE image for ARM (ac100) boards > + openSUSE 12.2 XFCE image for ARM (rootfs) boards > </specification> > </description> > <preferences> > > > To REVIEW against the previous version: > osc request show --diff 139668 > > To ACCEPT the request: > osc request accept 139668 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139668 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139668 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Re: [obs submit-request 139673] openSUSE:12.2:ARM/JeOS: created by Guillaume_G
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:30, <guillaume.gardet(a)opensuse.org> wrote: > > > home:Guillaume_G:branches:openSUSE:12.2:ARM/JeOS -> openSUSE:12.2:ARM/JeOS > > > https://build.opensuse.org/request/show/139673 > > Description: * Fix /etc/sysconfig/windowmanager hack to get XFCE as default > * Boot in runlevel 5 (gfx mode) instead of 3 (default) > > ++++++ config.sh > --- config.sh > +++ config.sh > @@ -88,8 +88,26 @@ > #-------------------------------------- > # XXX only do for XFCE image types > if [ -e /etc/sysconfig/displaymanager ]; then > - sed -i 's/^DISPLAYMANAGER=.*/DISPLAYMANAGER="lightdm"' /etc/sysconfig/displaymanager > - sed -i 's/^DEFAULT_WM=.*/DEFAULT_WM="xfce"' /etc/sysconfig/windowmanager > + baseUpdateSysConfig /etc/sysconfig/displaymanager DISPLAYMANAGER lightdm > +# baseUpdateSysConfig is working only on existing vars and DEFAULT_WM is not always defined, so test if exist In which case is it not defined? Can we assume that any case we care about it is defined? If so, we can just shove it into another if [ -e /etc/sysconfig/windowmanager ] && ! grep -q DEFAULT_WM /etc/sysconfig/windowsmanager; then ... block > + grep_result=$(grep DEFAULT_WM /etc/sysconfig/windowmanager) > + if [ "$grep_result" == "" ]; then > + echo ' Better use the EOF variant used in other spots in this file. I'm not sure we really need this path though. Please verify. > +## Path: Desktop/Window manager > +## Description: > +## Type: string(gnome,kde4,kde,lxde,xfce,twm,icewm) > +## Default: xfce > +## Config: profiles,kde,susewm > +# > +# Here you can set the default window manager (kde, fvwm, ...) > +# changes here require at least a re-login > +DEFAULT_WM="xfce"' >> /etc/sysconfig/windowmanager > + else > + baseUpdateSysConfig /etc/sysconfig/windowmanager DEFAULT_WM xfce > + fi > +# We want to start in gfx mode Wrong indent :) > + baseSetRunlevel 5 > + suseConfig Do we need this really? Alex > fi > > #====================================== > > > To REVIEW against the previous version: > osc request show --diff 139673 > > To ACCEPT the request: > osc request accept 139673 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139673 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139673 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 7

[opensuse-arm] armv5 build broken - please rebuild qemu packages
by Guillaume Gardet 29 Oct '12

29 Oct '12

Hi, In my OBS home repo I get this error during armv5 environment setup: file /usr/bin/qemu-arm-binfmt from install of qemu-accel-armv5tel-0.2-21.1.x86_64 conflicts with file from package qemu-linux-user-1.2.0-138.4.x86_64 Same with a local build. To fix it it seems that a rebuild of qemu (for qemu-linux-user package) is needed. I did it in local repo and this error is fixed. So, please trigger a rebuild of qemu. But I get another error: ARCHITECTURE PERSONALITY IS UNKNOWN. Log: [ 27s] booting XEN kernel ... [ 27s] xm create -c /var/tmp/build.xen.conf-hxGya4ErF name=build_2 disk=phy:/dev/dm-2,hda1,w disk=phy:/dev/dm-3,hda2,w extra=quiet init=/.build/initvm elevator=noop panic=1 console=ttyS0 [ 32s] Using config file "/var/tmp/build.xen.conf-hxGya4ErF". [ 32s] Started domain build_2 (id=26220) [ 32s] [ 0.260031] PCI: Fatal: No config space access function found [ 32s] [ 0.264046] Unable to read sysrq code in control/sysrq [ 32s] [ 0.367346] i8042: No controller found [ 32s] [ 0.369526] /home/abuild/rpmbuild/BUILD/kernel-xen-3.4.6/linux-3.4/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 32s] doing fast boot [ 33s] FATAL: Module kqemu not found. [ 33s] FATAL: Module ext2 not found. [ 33s] Creating device nodes with udev [ 34s] Waiting for device /dev/hda1 to appear: ok [ 34s] fsck from util-linux 2.21.2 [ 34s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/hda1 [ 34s] /dev/hda1: clean, 3618/897600 files, 161407/3584000 blocks [ 34s] fsck succeeded. Mounting root device read-only. [ 34s] Mounting root /dev/hda1 [ 34s] mount -o ro,defaults -t ext4 /dev/hda1 /root [ 1028s] ARCHITECTURE PERSONALITY IS UNKNOWN Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] qemu_accel repo is broken
by Guillaume Gardet 26 Oct '12

26 Oct '12

Hi, when you want to build something for qemu_accel (Repository: qemu_accel Architecture: x86_64), you get this error: getbinaries: missing packages: libgcc1 example: https://build.opensuse.org/package/live_build_log?arch=x86_64&package=qemu-… Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] armv8
by Alexander Graf 26 Oct '12

26 Oct '12

Hi, Linaro just announced a public armv8 Linux build plus emulator: http://www.linaro.org/engineering/armv8/ So if anyone wants to start bootstrapping openSUSE for armv8, here's your chance ;) Alex (thanks to scriptripper for showing me this url!) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] 12.2 ARM images broken
by Guillaume Gardet 26 Oct '12

26 Oct '12

Hi, 12.2 ARM images fails to build with the following error: For JeOS ***** |[ 1104s] running kiwi --prepare for tbz... [ 1119s] Oct-26 11:55:53 <1> : Setting log file to: terminal [ 1119s] Oct-26 11:55:53 <1> : Description provides no MD5 hash, check [ 1120s] Oct-26 11:55:54 <3> : Schema validation failed: unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Element image failed to validate content [ 1120s] failed [ 1120s] Oct-26 11:55:54 <1> : Automatically upgraded /usr/src/packages/SOURCES/config.xml to /usr/src/packages/SOURCES/config.converted.xml [ 1120s] Oct-26 11:55:54 <1> : Reported line numbers may not match the file /usr/src/packages/SOURCES/config.xml [ 1120s] Oct-26 11:55:54 <1> : EXEC [bash -c "PATH=$PATH:/sbin which jing" 2>&1] [ 1120s] Oct-26 11:55:54 <1> : warning: jing not found [ 1120s] Oct-26 11:55:54 <3> : unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Element image failed to validate content [ 1120s] [ 1120s] Oct-26 11:55:54 <1> : Use the jing command for more details [ 1120s] Oct-26 11:55:54 <1> : The following requires jing to be installed [ 1120s] Oct-26 11:55:54 <1> : jing /usr/share/kiwi/modules/KIWISchema.rng /usr/src/packages/SOURCES/config.converted.xml [ 1120s] Oct-26 11:55:54 <3> : KIWI exited with error(s) [ 1120s] done [ 1124s] [ 612.155862] SysRq : Power Off [ 1124s] [ 612.220671] Power down.| ***** FOr JeOS-beagle: ***** |[ 759s] running kiwi --prepare for oem... [ 769s] Oct-26 11:35:32 <1> : Setting log file to: terminal [ 769s] Oct-26 11:35:32 <1> : Description provides no MD5 hash, check [ 769s] Oct-26 11:35:33 <3> : Schema validation failed: unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 769s] unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 769s] unknown-169150:0: Relax-NG validity error : Element image failed to validate content [ 769s] failed [ 769s] Oct-26 11:35:33 <1> : Automatically upgraded /usr/src/packages/SOURCES/config.xml to /usr/src/packages/SOURCES/config.converted.xml [ 769s] Oct-26 11:35:33 <1> : Reported line numbers may not match the file /usr/src/packages/SOURCES/config.xml [ 769s] Oct-26 11:35:33 <1> : EXEC [bash -c "PATH=$PATH:/sbin which jing" 2>&1] [ 770s] Oct-26 11:35:33 <1> : warning: jing not found [ 770s] Oct-26 11:35:33 <3> : unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 770s] unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 770s] unknown-169150:0: Relax-NG validity error : Element image failed to validate content [ 770s] [ 770s] Oct-26 11:35:33 <1> : Use the jing command for more details [ 770s] Oct-26 11:35:33 <1> : The following requires jing to be installed [ 770s] Oct-26 11:35:33 <1> : jing /usr/share/kiwi/modules/KIWISchema.rng /usr/src/packages/SOURCES/config.converted.xml [ 770s] Oct-26 11:35:33 <3> : KIWI exited with error(s) [ 770s] done [ 780s] [ 656.742877] SysRq : Power Off [ 780s] [ 656.752355] Power down.| ***** I think it may be due to: 12.2 use an older kiwi than factory and we are trying to use image schemaversion="5.5" instead of 5.3 or something like that. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] arm build is broken (at least in my home)
by Guillaume Gardet 25 Oct '12

25 Oct '12

ARM builds give me kernel panic! Log: ****************************************************************************************** [ 35s] Mounting root /dev/hda1 [ 35s] mount -o ro,defaults -t ext4 /dev/hda1 /root [ 35s] execve: Exec format error [ 35s] [ 4.679443] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 35s] [ 4.679446] [ 35s] [ 4.679456] Pid: 1, comm: initvm Not tainted 3.4.6-2.10-xen #1 [ 35s] [ 4.679460] Call Trace: [ 35s] [ 4.679491] [<ffffffff800086e5>] dump_trace+0x85/0x1c0 [ 35s] [ 4.679501] [<ffffffff804f650d>] dump_stack+0x69/0x6f [ 35s] [ 4.679509] [<ffffffff804f763a>] panic+0xbe/0x1d9 [ 35s] [ 4.679516] [<ffffffff80031b1d>] do_exit+0x7bd/0x8b0 [ 35s] [ 4.679526] [<ffffffff80031f8a>] do_group_exit+0x3a/0xe0 [ 35s] [ 4.679532] [<ffffffff80032042>] sys_exit_group+0x12/0x20 [ 35s] [ 4.679541] [<ffffffff80508bfb>] system_call_fastpath+0x1a/0x1f [ 35s] [ 4.679556] [<000000000041aa88>] 0x41aa87 [ 37s] No buildstatus set, either the base system is broken (glibc/bash/perl) [ 37s] or the build host has a kernel or hardware problem... ****************************************************************************************** Then, it loops and try again to build... Is there anyone else having the same problem? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Bring up your device
by Alexander Graf 25 Oct '12

25 Oct '12

Howdy, I gave a workshop today on how to bring up your own ARM devices on openSUSE 12.2. You can find the slides for it here: http://csgraf.de/arm/openSUSE%20for%20ARM%20on%20your%20device.pdf They contain a bunch of useful information about workflows and openSUSE specifics that are otherwise hard to find. If you want to help out, I would be more than happy to read some of that information on the WIki :). Happy hacking, Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] qemu-accel-armv5el package
by Guillaume Gardet 25 Oct '12

25 Oct '12

Hi Adrian, you cleaned up the qemu-accel-armv5el package but it does not build anymore. Could you have a look at it, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] New Chromebook
by Alexander Graf 22 Oct '12

22 Oct '12

Hi guys, Google just announced their new Chromebook: http://liliputing.com/2012/10/google-introduces-249-samsung-chromebook-with… which features an Exynos 5 dual-core CPU, 2GB of RAM, a 16GB SSD and a high-res 11" screen for $249. This is the perfect openSUSE device! Now we only need to find out a) How to get any b) How to hack it so it runs our code Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] pkg-config in 12.2 ARM
by Guillaume Gardet 22 Oct '12

22 Oct '12

Hi, I build some packages for ARM but for 12.2 I need to add pkg-config as BuildRequires. For factory, I do not need to add it. It seems pkg-config is installed by default in Factory and not in 12.2. Any idea why? Is it a bug or a feature? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

Re: [opensuse-arm] New Chromebook
by Alexander Graf 19 Oct '12

19 Oct '12

The difference between ￡229 and $249 could pay for a lot of SD cards :) Alex On 19.10.2012, at 10:07, Andrew Wafaa <awafaa(a)opensuse.org> wrote: > Of course! I'm more than happy to be UK proxy. Also there is an offer at the moment to get them foe ￡229 instead of ￡249, not a big saving but that could pay for a 32GB SD card :) > > Regards, > > Andy > > -- > Sorry for top posting > Andrew Wafaa > IRC: FunkyPenguin > GPG: 0x3A36312F > > On 19 Oct 2012 08:41, "Alexander Graf" <agraf(a)suse.de> wrote: > > > On 19.10.2012, at 09:35, Andrew Wafaa <awafaa(a)opensuse.org> wrote: > > > On Fri, 2012-10-19 at 09:31 +0200, Alexander Graf wrote: > >> Hi guys, > >> > >> Google just announced their new Chromebook: > >> > >> http://liliputing.com/2012/10/google-introduces-249-samsung-chromebook-with… > >> > >> which features an Exynos 5 dual-core CPU, 2GB of RAM, a 16GB SSD and a high-res 11" screen for $249. > >> > >> This is the perfect openSUSE device! Now we only need to find out > >> > >> a) How to get any > >> b) How to hack it so it runs our code > >> > >> > >> Alex > >> > > > > I can bulk order, but I need the money to be able to. Any chance of > > funding? > > I can fund one for myself ;). But I might actually try to get that one shipped to the US and from there to LinuxCon. > > Let me ask around for funding. Would you be willing to play the uk proxy, take the delivery and send them on to .de? You can't order any for delivery to Germany. > > > Alex >

1 0

[opensuse-arm] Question regrading openSUSE:Factory:ARM:*
by Joop Boonen 19 Oct '12

19 Oct '12

Hi all, Today I notice that sub projects of openSUSE:Factory:ARM: exist on OBS. I would like to know what the policy is of these sub-projects. Would like to know if it would be possible to get a AC100 sub-project, for AC100 specific packages like kernel, image etc? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

Re: [opensuse-arm] armv5 kiwi support for oem images
by Alexander Graf 18 Oct '12

18 Oct '12

On 10/18/2012 01:35 PM, Guillaume Gardet wrote: > > Le 18/10/2012 12:18, Alexander Graf a écrit : >> On 10/18/2012 11:50 AM, Alexander Graf wrote: >>> On 10/18/2012 11:43 AM, Alexander Graf wrote: >>>> On 10/18/2012 11:41 AM, Guillaume Gardet wrote: >>>>> >>>>> Le 18/10/2012 11:01, Alexander Graf a écrit : >>>>>> >>>>>> On 18.10.2012, at 10:58, Adrian Schröter <adrian(a)suse.de> wrote: >>>>>> >>>>>>> Am Donnerstag, 18. Oktober 2012, 10:51:29 schrieb Guillaume Gardet: >>>>>>>> Le 18/10/2012 10:47, Adrian Schröter a écrit : >>>>>>>>> Am Donnerstag, 18. Oktober 2012, 10:45:25 schrieb Guillaume >>>>>>>>> Gardet: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> would it be possible to add armv5 kiwi support for oem >>>>>>>>>> images, please? >>>>>>>>>> >>>>>>>>>> With a quick look at the source code on : >>>>>>>>>> https://github.com/openSUSE/kiwi >>>>>>>>>> I guess we must create a system/boot/armv5tel/* (or armv5el?) >>>>>>>>>> using armv7l/* as template? Not sure if it is enough. >>>>>>>>>> >>>>>>>>>> I can do it if a kiwi guru (marcus?) give me some hints. >>>>>>>>> I am playing with that atm in openSUSE:Factory:ARM (some first >>>>>>>>> experimental boot files are there). >>>>>>>>> >>>>>>>>> However, we need to fix the qemu cpu emulation for armv5 first >>>>>>>>> or kiwi >>>>>>>>> won't pick anything else then the armv7 one ... >>>>>>>>> >>>>>>>> What is the problem with qemu for armv5? >>>>>>> according to uname it is armv7l cpu ... >>>>>> Yeah, we need a separate binfmt wrapper in qemu-accel-armv5 that >>>>>> sets QEMU_CPU to an armv5 cpu and then exec()s the real binfmt >>>>>> wrapper. >>>>> >>>>> Is there anyone who could fix that, please? Because I am not sure >>>>> what to do where! ;) >>>>> But, I can prepare a kiwi patch to add support for oem images. >>>>> Which arch will report qemu once fixed? armv5el, arm5tel or >>>>> something else? >>>> >>>> Yeah, I'll hack something up. >> >> Ok, done. Please verify it actually works and the new qemu-accel >> properly overwrites the binfmt wrapper with the new binary. > > How to check? Using "uname -a"? If, so, I tried to do it from a > package in my home project and I get: > |uname -a > [ 102s] Linux build02 3.4.6-2.10-xen #1 SMP Thu Jul 26 09:36:26 UTC > 2012 (641c197) armv7l armv7l armv7l GNU/Linux| Yeah, uname -a should do the trick. It did work for me locally when using the compiled qemu-armv5-binfmt manually. Could you please try to check if $ /qemu/qemu-armv5-binfmt /bin/uname uname -a works? Alex

2 21

[opensuse-arm] armv5 kernel-default
by Guillaume Gardet 18 Oct '12

18 Oct '12

Hi, I would like to add support to armv5 kernel-default. Patch is in attachment. Please comment. I am not sure if it is enough. I added a default config file in config/armv5el and added it to config.conf. If it is ok, I will send it -kernel ML. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 9

[opensuse-arm] Re: [obs submit-request 138671] openSUSE:Factory:ARM/JeOS.armv5: created by Guillaume_G
by Alexander Graf 18 Oct '12

18 Oct '12

On 10/18/2012 10:22 AM, guillaume.gardet(a)opensuse.org wrote: > > home:Guillaume_G:branches:openSUSE:Factory:ARM/JeOS.armv5 -> openSUSE:Factory:ARM/JeOS.armv5 > > > https://build.opensuse.org/request/show/138671 > > Description: Fix typo > > ++++++ JeOS-raspberrypi.kiwi > --- JeOS-raspberrypi.kiwi > +++ JeOS-raspberrypi.kiwi > @@ -89,6 +89,8 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > + > +<package name="ntp"/> >  > <archive name="uboot-setup.tgz" bootinclude="true"/> > </packages> > > ++++++ XFCE-raspberrypi.kiwi > --- XFCE-raspberrypi.kiwi > +++ XFCE-raspberrypi.kiwi > @@ -89,6 +89,8 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > + > +<package name="ntp"/> >  > <package name="patterns-openSUSE-xfce"/> > <package name="lightdm"/> > > ++++++ packagelist.inc > --- packagelist.inc > +++ packagelist.inc > @@ -40,7 +40,7 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > -#if IS_FLAVOR_rapsberrypi > +#if IS_FLAVOR_raspberrypi This shouldn't be #if'ed in the first place. For armv7 we always add ntp now. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] armv5 kiwi support for oem images
by Guillaume Gardet 18 Oct '12

18 Oct '12

Hi, would it be possible to add armv5 kiwi support for oem images, please? With a quick look at the source code on : https://github.com/openSUSE/kiwi I guess we must create a system/boot/armv5tel/* (or armv5el?) using armv7l/* as template? Not sure if it is enough. I can do it if a kiwi guru (marcus?) give me some hints. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 10

[opensuse-arm] ARM powered servers
by Bernhard M. Wiedemann 17 Oct '12

17 Oct '12

http://www.phoronix.com/scan.php?page=article&item=calxeda_ubuntu_pre&num=1 describes quite powerful ARM hardware from Boston ltd/Calxeda. The specs make me think of former supercomputers. Ciao Bernhard M. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Re: [obs submit-request 138533] openSUSE:Factory:ARM/JeOS.armv5: created by Guillaume_G
by Alexander Graf 17 Oct '12

17 Oct '12

On 10/17/2012 05:56 PM, guillaume.gardet(a)opensuse.org wrote: > > home:Guillaume_G:branches:openSUSE:Factory:ARM/JeOS.armv5 -> openSUSE:Factory:ARM/JeOS.armv5 > > > https://build.opensuse.org/request/show/138533 > > Description: Update to be able to handle multiple configs. > Added raspberry pi image but kiwi would need some update to handle armv5 oem images. > > old: > ---- > root.tar.bz2 > > new: > ---- > Images.kiwi.in > JeOS-raspberrypi.kiwi > XFCE-raspberrypi.kiwi > packagelist.inc > pre_checkin.sh > uboot-image-install > uboot-image-setup > uboot-setup.tgz > > other changes: > -------------- > > ++++++ Images.kiwi.in (new) > --- Images.kiwi.in > +++ Images.kiwi.in > @@ -0,0 +1,112 @@ > +<?xml version="1.0" encoding="utf-8"?> > + > +#define QUOTED(x) #x > +#define QUOTED_EXPAND(x) QUOTED(x) > + > +/* > + * > + */ > + > +#define VERSION Factory > +#define SUFFIX ARM > +#define IMAGENAME openSUSE-VERSION-SUFFIX-IMAGE_TYPE_STRING-FLAVOR_TYPE > +#define IMAGENAME_STR QUOTED_EXPAND(IMAGENAME) > + > +#define PKG_TAG(x)<package name=QUOTED_EXPAND(x)/> > +#define PKG_BOOT_TAG(x)<package name=QUOTED_EXPAND(x) bootinclude="true"/> > + > +/* > + * Define the specification > + */ > + > +#define SPECIFICATION openSUSE VERSION IMAGE_TYPE_STRING image for SUFFIX (FLAVOR_TYPE) boards > + > +/* > + * Define the bootkernel (default is default) > + */ > + > +#if IS_FLAVOR_raspberrypi > +# define BOOTKERNEL raspberrypi > +# define KERNEL_CMDLINE_STR "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootflags=commit=120,data=writeback rootwait ro" > +# define EXTRA_PACKAGES PKG_BOOT_TAG(raspberry-firmware) \ > + PKG_TAG(ntp) > +#else > +# define BOOTKERNEL default > +# define KERNEL_CMDLINE_STR "" > +# define EXTRA_PACKAGES > +#endif > + > +<image schemaversion="5.5" name=IMAGENAME_STR> > +  > + <description type="system"> > + <author>Marcus SchÃ¤fer</author> > + <contact>ms(a)novell.com</contact> > + <specification> > + SPECIFICATION > + </specification> > + </description> > +<preferences> > +#if IS_FLAVOR_JeOS > +<type image="tbz" primary="true"/> > +#else > +<type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" > + kernelcmdline=KERNEL_CMDLINE_STR > + editbootconfig="uboot-image-setup" editbootinstall="uboot-image-install"> > +<oemconfig> > +<oem-swapsize>500</oem-swapsize> > +</oemconfig> > +</type> > +#endif > + <version>1.12.1</version> > + <packagemanager>zypper</packagemanager> > + <locale>en_US</locale> > + <keytable>us.map.gz</keytable> > + <timezone>Europe/Berlin</timezone> > + <hwclock>utc</hwclock> > + <rpm-excludedocs>true</rpm-excludedocs> > + > + > + </preferences> > + <users group="root"> > + <user pwd="$1$wYJUgpM5$RXMMeASDc035eX.NbYWFl0" home="/root" name="root"/> > + </users> > + <repository type="rpm-md"> > + <source path="obs://openSUSE:Factory:ARM/armv5el"/> > + #if IS_FLAVOR_raspberrypi > + <source path="obs://openSUSE:Factory:ARM:Contrib:RaspberryPi/armv5el"/> Could we please keep JeOS description and packages in the same repo? So if you have a downstream raspberry pi kernel in Contrib:RaspberryPi, please also do the JeOS description in Contrib:RaspberryPi. However, the rest of the changes look fine. So how about we just remove the RbPI bits here (and readd them later when we get an upstream kernel), but simply link this JeOS description in the Contrib:RaspberryPi repository with a small patch to enable the rbpi bits? > + #endif > + </repository> > +  > + <strip type="tools"> > + <file name="qemu-arm-binfmt"/> > + <file name="qemu-arm"/> > + </strip> > + <packages type="bootstrap"> > +#if IS_FLAVOR_JeOS == 0 > +// FIXME: Currently, we have no kernel-default for armv5 I don't think we will ever have one. If I understand the kernel folks correctly, single zImage is a goal only for armv7 platforms. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Hello Rhasberry PI and other armv5/6 users
by Adrian Schröter 17 Oct '12

17 Oct '12

Our first JeOS armv5 image is built and is downloadable here: http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images_arm… please do not be confused by the armv7l in the file name. We will fix that glitch in future. But please test it on some real armv5/6 hardware like the Rhasberry PI. Eager to hear from you :) adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 4

[opensuse-arm] [ANN] openSUSE Conference Oct 20-23
by Andreas Färber 17 Oct '12

17 Oct '12

Hello, Who of you is going to attend oSC in Prague the weekend? "openSUSE ARMs" on Sun 13:30 in room Spock "Getting the Geeko some ARMs" on Sun 15:00 in room Rand Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 3

[opensuse-arm] Cubieboard
by Dirk Müller 15 Oct '12

15 Oct '12

Hi, does anyone have access to one of those devices? http://cubieboard.org/2012/09/02/some-pictures-of-cubieboard/ TIA, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 7

[opensuse-arm] openSUSE 12.2 Beta/Warmup for Release Candidates
by Dirk Müller 13 Oct '12

13 Oct '12

Hi, over the weekend we've built 12.2 images and smoke-tested them on one board (Panda). The images are here: http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/ We plan to announce them later as Release Candiate 1. If you own a Pandaboard, BeagleBoard or an EfikaMX, please give them a try. the Vexpress ones are iirc also completely untested so far. Any feedback (positive or negative) is highly welcome. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 15

[opensuse-arm] Factory beagle image boots only once
by Guillaume Gardet 12 Oct '12

12 Oct '12

Hi, Now MLO and u-boot are correctly installed in image but I have a new problem with Factory JeOS beagle image. First strange thing is that on first boot (at least), clocks seem to be bad. cat /proc/cpuinfo | grep BogoMIPS returns 175.65 (instead of 262.08) when idle, and cat /proc/cpuinfo | grep BogoMIPS returns 467.41 (instead of 700.57) when full. Moreover, Eth0 is detected but does not get any connection (and LEDs stay off). On the second boot, it stops here: ******************************************************************************** (...) your system time is not correct: Sat Jan 1 00:04:26 UTC 2000 setting system time to: Sun Aug 19 00:00:00 UTC 2012 [ 8.152404] alua: device handler registered [ 8.178344] emc: device handler registered [ 8.204162] hp_sw: device handler registered [ 8.230651] rdac: device handler registered Creating device nodes with udev [ 8.319793] udevd[90]: starting version 182 mount: devpts is already mounted or /dev/pts busy devpts is already mounted on /dev/pts Boot logging started on /dev/ttyO2(/dev/console) at Sun Aug 19 02:00:05 2012 Waiting for device /dev/0 to appear: ..............................Could not find /dev/0. Want me to fall back to /dev/disk/by-id/mmc-00000_0x770b5bf2-part2? (Y/n) ******************************************************************************** And I cannot answer to the last line to continue. It may be due to the kernel cmd line: root=0 loader=uboot disk=/dev/disk/by-id/mmc-00000_0x770b5bf2 resume=openSUSE-Factory-ARM-JeOS-beagle console=ttyO2 vram=16M Regards, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 9

[opensuse-arm] zypper inquiry
by Jonathan Brawn 12 Oct '12

12 Oct '12

Wotcha. So, I've downloaded and installed an openSUSE 12.2 image on my BeagleBoard,= and when you login as root it announces: "To upgrade your system call: zypper refresh zypper install -t product openSUSE-12.2 Have a lot of fun..." Well, the zypper refresh happens OK, but when I run the zypper install, I g= et the following: linux:~ # zypper install -t product openSUSE-12.2 Loading repository data... Reading installed packages... 'product:openSUSE =3D 12.2' is already installed. Package 'openSUSE' is not available in your repositories. Cannot reinstall,= upgrade, or downgrade. Resolving package dependencies... Nothing to do. linux:~ # Have I missed something during my install? Is there a repository that I nee= d to add somehow to the zypper repository database? Jon. ARM Jon Brawn Principal Design Engineer 3711 S. Mopac Expressway Building 1, Suite 400 Austin, TX, 78746 Direct: +1 512 381 2392 Email: jon.brawn(a)arm.com Phone: +1 512 327 9249 Fax: +1 512 314 1078 www.arm.com The Architecture for the Digital World(r) -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] e-ink or LCD display
by Kai Dupke 12 Oct '12

12 Oct '12

Hi, has any tried to attend an e-ink or LCD display to an arm board? Or is there a board available with a display? I'm looking for a b/w, 2.5''-4'' sized display. Anyone worked with SPI to connect such device? greetings Kai Dupke Senior Product Manager Server Product Line -- Phone: +49-(0)5102-9310828 Mail: kai.dupke(a)suse.com Mobile: +49-(0)173-5876766 WWW: www.suse.com SUSE Linux Products GmbH - Maxfeldstr. 5 - 90409 Nuernberg (Germany) GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nurnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Using DSP in OMAP4 (pandaboard) for video decoding
by Guillaume Gardet 12 Oct '12

12 Oct '12

Hi, It is difficult to find some sources from TI about DSP and video decoding for OMAP4. There are some sources from Ubuntu-omap: http://gitorious.org/ubuntu-omap I found that blog talking about a community (non-TI) solution: http://blogs.igalia.com/vjaquez/tag/gstdsp/ Does anybody have information or already tested some things? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] CONFIG_PREEMPT for ARM boards?
by Guillaume Gardet 12 Oct '12

12 Oct '12

Hi, Does anybody thought about kernel preemption for ARM boards? It could be usefull since kernel preemption is intended to embedded system or (Low-latency) Desktop. Moreover, If we want to enable openGL on omap4 (pandaboard), we need a preemptible kernel. Is there any objection to move to a preemptible kernel for omap2plus? For other ARM boards? For Factory and/or 12.2? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

[opensuse-arm] Image descriptions
by Alexander Graf 11 Oct '12

11 Oct '12

Howdy, I changed the image descriptions so that they always generate all files we used to have in root.tar.bz2 within config.sh. This will hopefully (once I figured out how) allow us to create different files depending on the actual image and board we build for. While at it, I added XFCE-panda and XFCE-beagle to 12.2. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] armv5tel switch -> complete rebuildN
by Adrian Schröter 10 Oct '12

10 Oct '12

Hi, JFYI, to complete the armv5tel architecture switch, I have triggered a complete rebuild of openSUSE:Factory:ARM for armv5 NOTE: rpm/zypp will handle armv5el and armv5tel as incompatible architectures. So you either need to manual update the rpm.rpm package with --ignorearch to do the switch when a new rpm tree is out there. Or just wait for the new appliances. As long as they build successfully, they will be there before the rpm ftp tree. bye adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] BeagleBoard Firmware Environment
by Jonathan Brawn 09 Oct '12

09 Oct '12

Wotcha! I've been playing with a BeagleBoard (rev C) that I happen to have around t= he place and I've been trying to run OpenSUSE on it. Now, it boots and I ca= n login on the serial port, but the graphical environment doesn't want to p= lay. I suspect that I've got a problem with the firmware environment variab= les - could someone who already has this working do me a favour and email m= e the complete firmware environment please, so I can cross check what's goi= ng on? Thanks a bunch! Jon. -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Beagleboard xM boots with 12.2 image but not with factory image
by Guillaume Gardet 09 Oct '12

09 Oct '12

Hi, With latest factory: openSUSE-Factory-ARM-beagle.armv7l-1.12.1-Build41.2.raw.xz Beagleboard xM does not boot because no MLO is found. (60 is written on serial port which means no MLO on SD, trying UART boot) With 12.2 image: http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/openSU… It boots normaly. Any idea? Is there any change in MLO handling in factory? Regards, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 20

[opensuse-arm] libqt4 failed
by Guillaume GARDET 08 Oct '12

08 Oct '12

Hi, libqt4 failed to build for both armv5 and armv7 in Factory. For armv7, it seems to be due to build-armv7-with-double-qreal.diff patch which lead to a double declaration of a function. I think we should instead use "-fpu no" (or softvfp, vfpv2 or softvfp+vfpv2?) option for configure? But I am not sure it will be really used. For armv5, the compiler does not find the file "bits/c++config.h" whereas the package libstdc++47-devel is installed: ******************************************************************************** [ 531s] In file included from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qlist.h:58:0, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qlist.h:1, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qstringlist.h:47, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qstringlist.h:1, [ 531s] from project.h:45, [ 531s] from option.h:45, [ 531s] from property.cpp:43: [ 531s] /usr/armv5el-suse-linux-gnueabi/usr/include/c++/4.7/new:41:28: fatal error: bits/c++config.h: No such file or directory ******************************************************************************** Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 20

[opensuse-arm] Update of image generation
by Guillaume Gardet 05 Oct '12

05 Oct '12

Hi, I made a request to merge my updates to JeOS* ad XFCE* images, here: https://build.opensuse.org/request/show/137246 Changelog : * Add support to XFCE images auto-generation * Add XFCE-beagle image * Rename images to get the image type (XFCE or JeOS) included in image name * Add dsp-tools and tidsp-binaries packages to beagle images (JeOS and XFCE) If you have any comments or any questions, please ask. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] XFCE images
by Guillaume Gardet 05 Oct '12

05 Oct '12

Hi, I am looking at auto-generation of XFCE images kiwi files (as it is done for JeOS) and I have some questions. XFCE-panda.kiwi has JeOS panda packages + XFCE / xorg specific packages + manual resolution of recommended packages + multiple choices. In XFCE specific packages, we have : openSUSE-release-usb-x11 which is provided by no package (at least for factory). Can we remove it ? What is it used for ? I think manual resolution of recommended packages is needed to be sure they are available when generating the image. Am I right ? Otherwise, I do not know why it is there as it should be done automatically by zypper. Finally, there is a package group named : multiple choices. What is it ? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] build error for armv5el (using x86_64 + 12.2)
by Alex Naumov 02 Oct '12

02 Oct '12

Hello, I'm trying to build test package "hello"[*] on x86_64 oS 12.2 for armv5el (RaspberryPi), but get such build error: > osc build --alternative-project=openSUSE:Factory:ARM armv5el armv5el hello.spec logging output to /var/tmp/build-root/.build.log... [ 0s] Memory limit set to 10885072KB [ 0s] Using BUILD_ROOT=/var/tmp/build-root [ 0s] Using BUILD_ARCH=armv5el [ 0s] [ 0s] [ 0s] linux-naumov started "build hello.spec" at Tue Oct 2 11:39:38 UTC 2012. [ 0s] [ 0s] [ 0s] processing specfile /home/naumov/OBS/home:Alexander_Naumov:branches:Base:System/hello/hello.spec ... [ 0s] running changelog2spec --target rpm --file /home/naumov/OBS/home:Alexander_Naumov:branches:Base:System/hello/hello.spec [ 0s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build --rpmlist /tmp/rpmlist.Y08uIx /home/naumov/OBS/home:Alexander_Naumov:branches:Base:System/hello/hello.spec ... [ 0s] Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [ 0s] reordering...cycle: glibc -> libgcc47 -> bash [ 0s] breaking dependency bash -> glibc [ 0s] cycle: libgcc47 -> bash [ 0s] breaking dependency bash -> libgcc47 [ 0s] cycle: glibc -> libgcc47 -> bash -> libreadline6 [ 0s] breaking dependency libreadline6 -> glibc [ 0s] cycle: libgcc47 -> bash -> libreadline6 [ 0s] breaking dependency libreadline6 -> libgcc47 [ 0s] cycle: glibc -> libgcc47 -> bash -> libreadline6 -> libncurses5 [ 0s] breaking dependency libncurses5 -> glibc [ 0s] cycle: libgcc47 -> bash -> libreadline6 -> libncurses5 [ 0s] breaking dependency libgcc47 -> bash [ 0s] cycle: glibc -> libgcc47 [ 0s] breaking dependency libgcc47 -> glibc [ 0s] cycle: libcrack2 -> cracklib [ 0s] breaking dependency libcrack2 -> cracklib [ 0s] done [ 0s] deleting man [ 0s] deleting qemu-accel-armv7hl [ 0s] deleting texinfo [ 1s] [1/109] deleting unwanted brp-check-suse-1.0-53.2.2 [ 1s] installing brp-check-suse-1.0-55.1 [ 1s] [2/109] deleting unwanted filesystem-12.2-4.2.2 [ 2s] preinstalling filesystem... [ 2s] installing filesystem-12.3-2.1 [ 2s] [3/109] deleting unwanted terminfo-base-5.9-12.5.1 [ 3s] installing terminfo-base-5.9-18.1 [ 3s] [4/109] deleting unwanted libgcc47-4.7.1_20120723-1.3.1 [ 3s] /bin/sh: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory [ 3s] warning: %postun(libgcc47-4.7.1_20120723-1.3.1.armv7hl) scriptlet failed, exit status 127 [ 3s] preinstalling libgcc47... [ 3s] installing libgcc47-4.7.1_20120723-2.1 [ 4s] [5/109] deleting unwanted glibc-2.15-22.6.3 [ 4s] warning: /etc/nsswitch.conf saved as /etc/nsswitch.conf.rpmsave [ 4s] warning: %postun(glibc-2.15-22.6.3.armv7hl) scriptlet failed, exit status 127 [ 4s] preinstalling glibc... [ 4s] installing glibc-2.16-2.1 [ 4s] /lib/ld-linux-armhf.so.3: No such file or directory [ 4s] exit ... Build for armv7l is ok (using openSUSE:12.2:ARM repo), but with armv5el (using openSUSE:12.2:ARM and openSUSE:Factory:ARM) I'm not so lucky :( Any ideas about this?? Regards, Alex * from example on this page: http://en.opensuse.org/openSUSE:ARM_distribution_howto -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Linaro Connect 29Oct-02Nov
by Andrew Wafaa 01 Oct '12

01 Oct '12

Aloha all, I was wondering if anyone was attending Linaro Connect[0] next month in Copenhagen? There will be numerous tracks of interest and also a cross-distro session. I will be there but was wondering if anyone else, especially from the SUSE engineering side. Regards, Andy 0 - http://connect.linaro.org/events/event/lce12-copenhagen/ -- Andrew Wafaa - Principal Engineer, Open Source - ARM Ltd. Tel: +44 1223 405981 Mob: +44 7974 074546 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2