October 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 02 Dec '12

02 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] openSUSE 12.2 RC2 Release preparation
by Dirk Müller 26 Nov '12

26 Nov '12

Hi ARM :-), Hi Jos, Alex and I have worked yesterday a few hours to finish up the last remaining bugs for a 12.2 RC2 release. we plan that this is the last RC before final 12.2 for ARM, which is scheduled for November 6th. The changes over RC1 are: * various bugfixes in the imaging * add an update repository to the images for maintenance * adding various fixes for booting machines without RTC with a reasonable system time * Adding a YaST firstboot stage for configuring the country, language, root password and creating the first user login * various smaller fixes in packaging We have also enabled support for the following SoCs' * Calxeda Highbank * CuBox * IMX 53 * Samsung Origen In addition, we added XFCE images for panda and beagle board. We know that those still have some bugs that need to be fixed for the final release. the JeOS images are good though. We've personally tested some of the variations, but not all of them. We'd like to get more feedback about it. In addition to that, we've also worked on graphics support for a few of the boards, with varying results. The Raspberry Pi image is not part of this release, it will come at a later point in time as a separate announcement. The images are available for download from: http://download.opensuse.org/ports/armv7hl/distribution/12.2-RC2/ This link is not yet up, I'm still waiting for the build service team to sign and upload the images there. This link: http://download.opensuse.org/ports/armv7hl/distribution/openSUSE-stable/ will point to RC2 once it is available so we could use that one as well. I hope that we can do the announcement on sunday evening latest, but it might slip to monday I'm afraid :( Please work on the promo bits, and fire at will once the link above (with - RC2) is working. The rest of the announcement can be reused from the RC1 announcement that Andrew did. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

7 31

[opensuse-arm] Please fix kiwi package (conflict in kiwi.changes)
by Guillaume Gardet 06 Nov '12

06 Nov '12

Hi, kiwi is broken due to an update on Virtualization:Appliances which lead to a conflict in kiwi.changes. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] 12.2 rc2 - beagle
by Guillaume Gardet 01 Nov '12

01 Nov '12

Hi, I tested quickly JeOS and XFCE beagle images on a beagleboard xM. YaST firstboot is launched, so it is very nice to have a configured board. But it is launched on the serial port and not on the DVI output. Is it configurable? I guess it is launched on the debug console? It could be nice to have it on serial for JeOS and on graphical user interface on XFCE image. Moreover, XFCE (and X) is (are) not launched automatically on boot. I needed to do a "sudo startxfce4". Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] kiwi image for Raspberry Pi (armv5)
by Guillaume Gardet 31 Oct '12

31 Oct '12

Hi, with my first pacthes for armv5 support to kiwi, I am nearly done but I have a problem with vmlinuz. I get the following error during Raspberry Pi image build: [ 1927s] mv: cannot stat 'vmlinuz-3.1.10-1.17-raspberrypi': No such file or directory Which lead to the final error: [ 1928s] Oct-31 15:43:23 <1> : Extracting kernel [ 1928s] Oct-31 15:43:23 <1> : EXEC [pwd] [ 1928s] Oct-31 15:43:24 <3> : Can't find kernel for extraction: No such file or directory It seems that the kiwi source code is: ******************************************************************************** #========================================== # create common kernel files, last wins ! #------------------------------------------ pushd /boot if [ -f uImage-$VERSION ];then mv uImage-$VERSION vmlinuz elif [ -f vmlinux-$VERSION.gz ];then mv vmlinux-$VERSION.gz vmlinux.gz mv vmlinuz-$VERSION vmlinuz elif [ -f vmlinuz-$VERSION.el5 ];then mv vmlinux-$VERSION.el5 vmlinuz elif [ -f vmlinuz-$VERSION ];then mv vmlinuz-$VERSION vmlinuz elif [ -f image-$VERSION ];then mv image-$VERSION vmlinuz else rm -f vmlinux cp vmlinux-$VERSION vmlinux mv vmlinux-$VERSION vmlinuz fi ******************************************************************************** So, "mv" should occur only when the file exist. In my case it should not stop in vmlinuz-$VERSION but in image-$VERSION. Any idea what is going on? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] Interesting ARM news
by Joop Boonen 31 Oct '12

31 Oct '12

Hi all, Some quite interesting ARM news. ARM introduces Cortex A-50 (armv8) processors http://www.arm.com/about/newsroom/arm-launches-cortex-a50-series-the-worlds… AMD will produce ARM processors for servers. http://www.amd.com/us/press-releases/Pages/press-release-2012Oct29.aspx Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] kiwi initrd and driver support
by Alexander Graf 30 Oct '12

30 Oct '12

Hi Marcus, I'm wondering how the kiwi initrd determines which drivers need to be included in the initrd. To be precise, I'm missing the drivers/mtd directory which renders the vexpress image unusable, because it doesn't contain disk drivers ;). Do you manually pick modules during the creation of the initial kiwi initrd? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Re: [obs submit-request 139668] openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100: created by worldcitizen
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:03, <joop.boonen(a)boonen.org> wrote: > > > home:worldcitizen:branches:openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 -> openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 > > > https://build.opensuse.org/request/show/139668 > > Description: testing via uboot-image-install also added all improvements suggested by agraf > > ++++++ Images.kiwi.in > --- Images.kiwi.in > +++ Images.kiwi.in > @@ -54,6 +54,10 @@ > # define BOOTKERNEL exynos > # define KERNEL_CMDLINE_STR "console=ttySAC2,115200n8" > # define EXTRA_PACKAGES PKG_BOOT_TAG(u-boot-origen) > +#elif IS_FLAVOR_ac100 > +# define BOOTKERNEL tegra-ac100 > +# define KERNEL_CMDLINE_STR "" > +# define EXTRA_PACKAGES abootimg This needs special escaping. Check out the way it's done for origen just above :) > #else > # define BOOTKERNEL default > # define KERNEL_CMDLINE_STR "" > @@ -85,8 +89,6 @@ > <preferences> > #if IS_FLAVOR_rootfs > <type image="tbz" primary="true"/> > -#elif IS_FLAVOR_ac100 > - <type image="tbz" primary="true"/> > #else > <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" > kernelcmdline=KERNEL_CMDLINE_STR > @@ -112,6 +114,11 @@ > <repository type="rpm-md"> > <source path="obs://openSUSE:12.2:ARM/standard"/> > </repository> > +#if IS_FLAVOR_ac100 > + <repository type="rpm-md"> > + <source path="obs://openSUSE:12.2:ARM:Contrib:Tegra/standard"/> > + </repository> > +#endif >  > <strip type="tools"> > <file name="qemu-arm-binfmt"/> > > ++++++ JeOS-ac100.kiwi > --- JeOS-ac100.kiwi > +++ JeOS-ac100.kiwi > @@ -17,7 +17,11 @@ > </specification> > </description> > <preferences> > - <type image="tbz" primary="true"/> > + <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" kernelcmdline="" editbootconfig="uboot-image-setup" editbootinstall="uboot-image-install"> > + <oemconfig> > + <oem-swapsize>500</oem-swapsize> > + </oemconfig> > + </type> > <version>1.12.1</version> > <packagemanager>zypper</packagemanager> > <locale>en_US</locale> > @@ -42,57 +46,56 @@ > <file name="qemu-arm-binfmt"/> > <file name="qemu-arm"/> > </strip> > - <packages type="bootstrap"> > - <package name="kernel-tegra-ac100" bootinclude="true"/> > - <package name="abootimg"/> > - <package name="aaa_base"/> > - <package name="aaa_base-extras"/> > - <package name="branding-openSUSE"/> > - <package name="cracklib-dict-full"/> > - <package name="dhcpcd"/> > - <package name="elfutils"/> > - <package name="filesystem"/> > - <package name="glibc-locale"/> > - <package name="hwinfo"/> > - <package name="ifplugd"/> > - <package name="insserv"/> > - <package name="iputils"/> > - <package name="kbd"/> > - <package name="kernel-firmware"/> > - <package name="less"/> > - <package name="lvm2"/> > - <package name="mkinitrd"/> > - <package name="module-init-tools"/> > - <package name="ncurses-utils"/> > - <package name="netcfg"/> > -  > - <package name="ntp"/> > - <package name="openssh"/> > - <package name="openSUSE-release"/> > - <package name="pkg-config"/> > - <package name="polkit"/> > - <package name="procps"/> > - <package name="pwdutils"/> > - <package name="plymouth"/> > - <package name="qemu-linux-user-arm" bootinclude="true"/> > - <package name="rpcbind"/> > - <package name="rpm"/> > - <package name="rsyslog"/> > - <package name="sysconfig"/> > - <package name="systemd-sysvinit"/> > - <package name="timezone"/> > - <package name="u-boot-tools"/> > - <package name="vim"/> > - <package name="wireless-tools"/> > - <package name="wpa_supplicant"/> > - <package name="openSUSE-build-key"/> > - <package name="yast2-firstboot"/> > -  > - <package name="yast2-users"/> > - <package name="zypper"/> > -  > - <archive name="uboot-setup.tgz" bootinclude="true"/> > - </packages> > + <packages type="bootstrap"><package name="kernel-tegra-ac100" bootinclude="true"/> > +abootimg See? Looks bogus, no? > +<package name="aaa_base"/> > +<package name="aaa_base-extras"/> > +<package name="branding-openSUSE"/> > +<package name="cracklib-dict-full"/> > +<package name="dhcpcd"/> > +<package name="elfutils"/> > +<package name="filesystem"/> > +<package name="glibc-locale"/> > +<package name="hwinfo"/> > +<package name="ifplugd"/> > +<package name="insserv"/> > +<package name="iputils"/> > +<package name="kbd"/> > +<package name="kernel-firmware"/> > +<package name="less"/> > +<package name="lvm2"/> > +<package name="mkinitrd"/> > +<package name="module-init-tools"/> > +<package name="ncurses-utils"/> > +<package name="netcfg"/> > + > +<package name="ntp"/> > +<package name="openssh"/> > +<package name="openSUSE-release"/> > +<package name="pkg-config"/> > +<package name="polkit"/> > +<package name="procps"/> > +<package name="pwdutils"/> > +<package name="plymouth"/> > +<package name="qemu-linux-user-arm" bootinclude="true"/> > +<package name="rpcbind"/> > +<package name="rpm"/> > +<package name="rsyslog"/> > +<package name="sysconfig"/> > +<package name="systemd-sysvinit"/> > +<package name="timezone"/> > +<package name="u-boot-tools"/> > +<package name="vim"/> > +<package name="wireless-tools"/> > +<package name="wpa_supplicant"/> > +<package name="openSUSE-build-key"/> > +<package name="yast2-firstboot"/> > + > +<package name="yast2-users"/> > +<package name="zypper"/> > + > + <archive name="uboot-setup.tgz" bootinclude="true"/> > + </packages> > <packages type="delete"> > <!-- not needed at runtime, but removing would happen too early > <package name="qemu-linux-user-arm" /> > > ++++++ XFCE-ac100.kiwi > --- XFCE-ac100.kiwi > +++ XFCE-ac100.kiwi > @@ -1,5 +1,5 @@ > <?xml version="1.0" encoding="utf-8"?> > -<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-ac100"> > +<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-rootfs"> Oh? What happened here? Alex > <!-- > ***************************************************************************** > ***************************************************************************** > @@ -13,7 +13,7 @@ > <author>Marcus Schäfer</author> > <contact>ms(a)novell.com</contact> > <specification> > - openSUSE 12.2 XFCE image for ARM (ac100) boards > + openSUSE 12.2 XFCE image for ARM (rootfs) boards > </specification> > </description> > <preferences> > > > To REVIEW against the previous version: > osc request show --diff 139668 > > To ACCEPT the request: > osc request accept 139668 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139668 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139668 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Re: [obs submit-request 139673] openSUSE:12.2:ARM/JeOS: created by Guillaume_G
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:30, <guillaume.gardet(a)opensuse.org> wrote: > > > home:Guillaume_G:branches:openSUSE:12.2:ARM/JeOS -> openSUSE:12.2:ARM/JeOS > > > https://build.opensuse.org/request/show/139673 > > Description: * Fix /etc/sysconfig/windowmanager hack to get XFCE as default > * Boot in runlevel 5 (gfx mode) instead of 3 (default) > > ++++++ config.sh > --- config.sh > +++ config.sh > @@ -88,8 +88,26 @@ > #-------------------------------------- > # XXX only do for XFCE image types > if [ -e /etc/sysconfig/displaymanager ]; then > - sed -i 's/^DISPLAYMANAGER=.*/DISPLAYMANAGER="lightdm"' /etc/sysconfig/displaymanager > - sed -i 's/^DEFAULT_WM=.*/DEFAULT_WM="xfce"' /etc/sysconfig/windowmanager > + baseUpdateSysConfig /etc/sysconfig/displaymanager DISPLAYMANAGER lightdm > +# baseUpdateSysConfig is working only on existing vars and DEFAULT_WM is not always defined, so test if exist In which case is it not defined? Can we assume that any case we care about it is defined? If so, we can just shove it into another if [ -e /etc/sysconfig/windowmanager ] && ! grep -q DEFAULT_WM /etc/sysconfig/windowsmanager; then ... block > + grep_result=$(grep DEFAULT_WM /etc/sysconfig/windowmanager) > + if [ "$grep_result" == "" ]; then > + echo ' Better use the EOF variant used in other spots in this file. I'm not sure we really need this path though. Please verify. > +## Path: Desktop/Window manager > +## Description: > +## Type: string(gnome,kde4,kde,lxde,xfce,twm,icewm) > +## Default: xfce > +## Config: profiles,kde,susewm > +# > +# Here you can set the default window manager (kde, fvwm, ...) > +# changes here require at least a re-login > +DEFAULT_WM="xfce"' >> /etc/sysconfig/windowmanager > + else > + baseUpdateSysConfig /etc/sysconfig/windowmanager DEFAULT_WM xfce > + fi > +# We want to start in gfx mode Wrong indent :) > + baseSetRunlevel 5 > + suseConfig Do we need this really? Alex > fi > > #====================================== > > > To REVIEW against the previous version: > osc request show --diff 139673 > > To ACCEPT the request: > osc request accept 139673 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139673 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139673 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 7

[opensuse-arm] armv5 build broken - please rebuild qemu packages
by Guillaume Gardet 29 Oct '12

29 Oct '12

Hi, In my OBS home repo I get this error during armv5 environment setup: file /usr/bin/qemu-arm-binfmt from install of qemu-accel-armv5tel-0.2-21.1.x86_64 conflicts with file from package qemu-linux-user-1.2.0-138.4.x86_64 Same with a local build. To fix it it seems that a rebuild of qemu (for qemu-linux-user package) is needed. I did it in local repo and this error is fixed. So, please trigger a rebuild of qemu. But I get another error: ARCHITECTURE PERSONALITY IS UNKNOWN. Log: [ 27s] booting XEN kernel ... [ 27s] xm create -c /var/tmp/build.xen.conf-hxGya4ErF name=build_2 disk=phy:/dev/dm-2,hda1,w disk=phy:/dev/dm-3,hda2,w extra=quiet init=/.build/initvm elevator=noop panic=1 console=ttyS0 [ 32s] Using config file "/var/tmp/build.xen.conf-hxGya4ErF". [ 32s] Started domain build_2 (id=26220) [ 32s] [ 0.260031] PCI: Fatal: No config space access function found [ 32s] [ 0.264046] Unable to read sysrq code in control/sysrq [ 32s] [ 0.367346] i8042: No controller found [ 32s] [ 0.369526] /home/abuild/rpmbuild/BUILD/kernel-xen-3.4.6/linux-3.4/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 32s] doing fast boot [ 33s] FATAL: Module kqemu not found. [ 33s] FATAL: Module ext2 not found. [ 33s] Creating device nodes with udev [ 34s] Waiting for device /dev/hda1 to appear: ok [ 34s] fsck from util-linux 2.21.2 [ 34s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/hda1 [ 34s] /dev/hda1: clean, 3618/897600 files, 161407/3584000 blocks [ 34s] fsck succeeded. Mounting root device read-only. [ 34s] Mounting root /dev/hda1 [ 34s] mount -o ro,defaults -t ext4 /dev/hda1 /root [ 1028s] ARCHITECTURE PERSONALITY IS UNKNOWN Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] qemu_accel repo is broken
by Guillaume Gardet 26 Oct '12

26 Oct '12

Hi, when you want to build something for qemu_accel (Repository: qemu_accel Architecture: x86_64), you get this error: getbinaries: missing packages: libgcc1 example: https://build.opensuse.org/package/live_build_log?arch=x86_64&package=qemu-… Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] armv8
by Alexander Graf 26 Oct '12

26 Oct '12

Hi, Linaro just announced a public armv8 Linux build plus emulator: http://www.linaro.org/engineering/armv8/ So if anyone wants to start bootstrapping openSUSE for armv8, here's your chance ;) Alex (thanks to scriptripper for showing me this url!) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] 12.2 ARM images broken
by Guillaume Gardet 26 Oct '12

26 Oct '12

Hi, 12.2 ARM images fails to build with the following error: For JeOS ***** |[ 1104s] running kiwi --prepare for tbz... [ 1119s] Oct-26 11:55:53 <1> : Setting log file to: terminal [ 1119s] Oct-26 11:55:53 <1> : Description provides no MD5 hash, check [ 1120s] Oct-26 11:55:54 <3> : Schema validation failed: unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Element image failed to validate content [ 1120s] failed [ 1120s] Oct-26 11:55:54 <1> : Automatically upgraded /usr/src/packages/SOURCES/config.xml to /usr/src/packages/SOURCES/config.converted.xml [ 1120s] Oct-26 11:55:54 <1> : Reported line numbers may not match the file /usr/src/packages/SOURCES/config.xml [ 1120s] Oct-26 11:55:54 <1> : EXEC [bash -c "PATH=$PATH:/sbin which jing" 2>&1] [ 1120s] Oct-26 11:55:54 <1> : warning: jing not found [ 1120s] Oct-26 11:55:54 <3> : unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Invalid sequence in interleave [ 1120s] unknown-1362f78:0: Relax-NG validity error : Element image failed to validate content [ 1120s] [ 1120s] Oct-26 11:55:54 <1> : Use the jing command for more details [ 1120s] Oct-26 11:55:54 <1> : The following requires jing to be installed [ 1120s] Oct-26 11:55:54 <1> : jing /usr/share/kiwi/modules/KIWISchema.rng /usr/src/packages/SOURCES/config.converted.xml [ 1120s] Oct-26 11:55:54 <3> : KIWI exited with error(s) [ 1120s] done [ 1124s] [ 612.155862] SysRq : Power Off [ 1124s] [ 612.220671] Power down.| ***** FOr JeOS-beagle: ***** |[ 759s] running kiwi --prepare for oem... [ 769s] Oct-26 11:35:32 <1> : Setting log file to: terminal [ 769s] Oct-26 11:35:32 <1> : Description provides no MD5 hash, check [ 769s] Oct-26 11:35:33 <3> : Schema validation failed: unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 769s] unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 769s] unknown-169150:0: Relax-NG validity error : Element image failed to validate content [ 769s] failed [ 769s] Oct-26 11:35:33 <1> : Automatically upgraded /usr/src/packages/SOURCES/config.xml to /usr/src/packages/SOURCES/config.converted.xml [ 769s] Oct-26 11:35:33 <1> : Reported line numbers may not match the file /usr/src/packages/SOURCES/config.xml [ 769s] Oct-26 11:35:33 <1> : EXEC [bash -c "PATH=$PATH:/sbin which jing" 2>&1] [ 770s] Oct-26 11:35:33 <1> : warning: jing not found [ 770s] Oct-26 11:35:33 <3> : unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 770s] unknown-169150:0: Relax-NG validity error : Invalid sequence in interleave [ 770s] unknown-169150:0: Relax-NG validity error : Element image failed to validate content [ 770s] [ 770s] Oct-26 11:35:33 <1> : Use the jing command for more details [ 770s] Oct-26 11:35:33 <1> : The following requires jing to be installed [ 770s] Oct-26 11:35:33 <1> : jing /usr/share/kiwi/modules/KIWISchema.rng /usr/src/packages/SOURCES/config.converted.xml [ 770s] Oct-26 11:35:33 <3> : KIWI exited with error(s) [ 770s] done [ 780s] [ 656.742877] SysRq : Power Off [ 780s] [ 656.752355] Power down.| ***** I think it may be due to: 12.2 use an older kiwi than factory and we are trying to use image schemaversion="5.5" instead of 5.3 or something like that. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] arm build is broken (at least in my home)
by Guillaume Gardet 25 Oct '12

25 Oct '12

ARM builds give me kernel panic! Log: ****************************************************************************************** [ 35s] Mounting root /dev/hda1 [ 35s] mount -o ro,defaults -t ext4 /dev/hda1 /root [ 35s] execve: Exec format error [ 35s] [ 4.679443] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 35s] [ 4.679446] [ 35s] [ 4.679456] Pid: 1, comm: initvm Not tainted 3.4.6-2.10-xen #1 [ 35s] [ 4.679460] Call Trace: [ 35s] [ 4.679491] [<ffffffff800086e5>] dump_trace+0x85/0x1c0 [ 35s] [ 4.679501] [<ffffffff804f650d>] dump_stack+0x69/0x6f [ 35s] [ 4.679509] [<ffffffff804f763a>] panic+0xbe/0x1d9 [ 35s] [ 4.679516] [<ffffffff80031b1d>] do_exit+0x7bd/0x8b0 [ 35s] [ 4.679526] [<ffffffff80031f8a>] do_group_exit+0x3a/0xe0 [ 35s] [ 4.679532] [<ffffffff80032042>] sys_exit_group+0x12/0x20 [ 35s] [ 4.679541] [<ffffffff80508bfb>] system_call_fastpath+0x1a/0x1f [ 35s] [ 4.679556] [<000000000041aa88>] 0x41aa87 [ 37s] No buildstatus set, either the base system is broken (glibc/bash/perl) [ 37s] or the build host has a kernel or hardware problem... ****************************************************************************************** Then, it loops and try again to build... Is there anyone else having the same problem? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Bring up your device
by Alexander Graf 25 Oct '12

25 Oct '12

Howdy, I gave a workshop today on how to bring up your own ARM devices on openSUSE 12.2. You can find the slides for it here: http://csgraf.de/arm/openSUSE%20for%20ARM%20on%20your%20device.pdf They contain a bunch of useful information about workflows and openSUSE specifics that are otherwise hard to find. If you want to help out, I would be more than happy to read some of that information on the WIki :). Happy hacking, Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] qemu-accel-armv5el package
by Guillaume Gardet 25 Oct '12

25 Oct '12

Hi Adrian, you cleaned up the qemu-accel-armv5el package but it does not build anymore. Could you have a look at it, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] New Chromebook
by Alexander Graf 22 Oct '12

22 Oct '12

Hi guys, Google just announced their new Chromebook: http://liliputing.com/2012/10/google-introduces-249-samsung-chromebook-with… which features an Exynos 5 dual-core CPU, 2GB of RAM, a 16GB SSD and a high-res 11" screen for $249. This is the perfect openSUSE device! Now we only need to find out a) How to get any b) How to hack it so it runs our code Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] pkg-config in 12.2 ARM
by Guillaume Gardet 22 Oct '12

22 Oct '12

Hi, I build some packages for ARM but for 12.2 I need to add pkg-config as BuildRequires. For factory, I do not need to add it. It seems pkg-config is installed by default in Factory and not in 12.2. Any idea why? Is it a bug or a feature? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

Re: [opensuse-arm] New Chromebook
by Alexander Graf 19 Oct '12

19 Oct '12

The difference between ￡229 and $249 could pay for a lot of SD cards :) Alex On 19.10.2012, at 10:07, Andrew Wafaa <awafaa(a)opensuse.org> wrote: > Of course! I'm more than happy to be UK proxy. Also there is an offer at the moment to get them foe ￡229 instead of ￡249, not a big saving but that could pay for a 32GB SD card :) > > Regards, > > Andy > > -- > Sorry for top posting > Andrew Wafaa > IRC: FunkyPenguin > GPG: 0x3A36312F > > On 19 Oct 2012 08:41, "Alexander Graf" <agraf(a)suse.de> wrote: > > > On 19.10.2012, at 09:35, Andrew Wafaa <awafaa(a)opensuse.org> wrote: > > > On Fri, 2012-10-19 at 09:31 +0200, Alexander Graf wrote: > >> Hi guys, > >> > >> Google just announced their new Chromebook: > >> > >> http://liliputing.com/2012/10/google-introduces-249-samsung-chromebook-with… > >> > >> which features an Exynos 5 dual-core CPU, 2GB of RAM, a 16GB SSD and a high-res 11" screen for $249. > >> > >> This is the perfect openSUSE device! Now we only need to find out > >> > >> a) How to get any > >> b) How to hack it so it runs our code > >> > >> > >> Alex > >> > > > > I can bulk order, but I need the money to be able to. Any chance of > > funding? > > I can fund one for myself ;). But I might actually try to get that one shipped to the US and from there to LinuxCon. > > Let me ask around for funding. Would you be willing to play the uk proxy, take the delivery and send them on to .de? You can't order any for delivery to Germany. > > > Alex >

1 0

[opensuse-arm] Question regrading openSUSE:Factory:ARM:*
by Joop Boonen 19 Oct '12

19 Oct '12

Hi all, Today I notice that sub projects of openSUSE:Factory:ARM: exist on OBS. I would like to know what the policy is of these sub-projects. Would like to know if it would be possible to get a AC100 sub-project, for AC100 specific packages like kernel, image etc? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

Re: [opensuse-arm] armv5 kiwi support for oem images
by Alexander Graf 18 Oct '12

18 Oct '12

On 10/18/2012 01:35 PM, Guillaume Gardet wrote: > > Le 18/10/2012 12:18, Alexander Graf a écrit : >> On 10/18/2012 11:50 AM, Alexander Graf wrote: >>> On 10/18/2012 11:43 AM, Alexander Graf wrote: >>>> On 10/18/2012 11:41 AM, Guillaume Gardet wrote: >>>>> >>>>> Le 18/10/2012 11:01, Alexander Graf a écrit : >>>>>> >>>>>> On 18.10.2012, at 10:58, Adrian Schröter <adrian(a)suse.de> wrote: >>>>>> >>>>>>> Am Donnerstag, 18. Oktober 2012, 10:51:29 schrieb Guillaume Gardet: >>>>>>>> Le 18/10/2012 10:47, Adrian Schröter a écrit : >>>>>>>>> Am Donnerstag, 18. Oktober 2012, 10:45:25 schrieb Guillaume >>>>>>>>> Gardet: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> would it be possible to add armv5 kiwi support for oem >>>>>>>>>> images, please? >>>>>>>>>> >>>>>>>>>> With a quick look at the source code on : >>>>>>>>>> https://github.com/openSUSE/kiwi >>>>>>>>>> I guess we must create a system/boot/armv5tel/* (or armv5el?) >>>>>>>>>> using armv7l/* as template? Not sure if it is enough. >>>>>>>>>> >>>>>>>>>> I can do it if a kiwi guru (marcus?) give me some hints. >>>>>>>>> I am playing with that atm in openSUSE:Factory:ARM (some first >>>>>>>>> experimental boot files are there). >>>>>>>>> >>>>>>>>> However, we need to fix the qemu cpu emulation for armv5 first >>>>>>>>> or kiwi >>>>>>>>> won't pick anything else then the armv7 one ... >>>>>>>>> >>>>>>>> What is the problem with qemu for armv5? >>>>>>> according to uname it is armv7l cpu ... >>>>>> Yeah, we need a separate binfmt wrapper in qemu-accel-armv5 that >>>>>> sets QEMU_CPU to an armv5 cpu and then exec()s the real binfmt >>>>>> wrapper. >>>>> >>>>> Is there anyone who could fix that, please? Because I am not sure >>>>> what to do where! ;) >>>>> But, I can prepare a kiwi patch to add support for oem images. >>>>> Which arch will report qemu once fixed? armv5el, arm5tel or >>>>> something else? >>>> >>>> Yeah, I'll hack something up. >> >> Ok, done. Please verify it actually works and the new qemu-accel >> properly overwrites the binfmt wrapper with the new binary. > > How to check? Using "uname -a"? If, so, I tried to do it from a > package in my home project and I get: > |uname -a > [ 102s] Linux build02 3.4.6-2.10-xen #1 SMP Thu Jul 26 09:36:26 UTC > 2012 (641c197) armv7l armv7l armv7l GNU/Linux| Yeah, uname -a should do the trick. It did work for me locally when using the compiled qemu-armv5-binfmt manually. Could you please try to check if $ /qemu/qemu-armv5-binfmt /bin/uname uname -a works? Alex

2 21

[opensuse-arm] armv5 kernel-default
by Guillaume Gardet 18 Oct '12

18 Oct '12

Hi, I would like to add support to armv5 kernel-default. Patch is in attachment. Please comment. I am not sure if it is enough. I added a default config file in config/armv5el and added it to config.conf. If it is ok, I will send it -kernel ML. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 9

[opensuse-arm] Re: [obs submit-request 138671] openSUSE:Factory:ARM/JeOS.armv5: created by Guillaume_G
by Alexander Graf 18 Oct '12

18 Oct '12

On 10/18/2012 10:22 AM, guillaume.gardet(a)opensuse.org wrote: > > home:Guillaume_G:branches:openSUSE:Factory:ARM/JeOS.armv5 -> openSUSE:Factory:ARM/JeOS.armv5 > > > https://build.opensuse.org/request/show/138671 > > Description: Fix typo > > ++++++ JeOS-raspberrypi.kiwi > --- JeOS-raspberrypi.kiwi > +++ JeOS-raspberrypi.kiwi > @@ -89,6 +89,8 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > + > +<package name="ntp"/> >  > <archive name="uboot-setup.tgz" bootinclude="true"/> > </packages> > > ++++++ XFCE-raspberrypi.kiwi > --- XFCE-raspberrypi.kiwi > +++ XFCE-raspberrypi.kiwi > @@ -89,6 +89,8 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > + > +<package name="ntp"/> >  > <package name="patterns-openSUSE-xfce"/> > <package name="lightdm"/> > > ++++++ packagelist.inc > --- packagelist.inc > +++ packagelist.inc > @@ -40,7 +40,7 @@ > <package name="openSUSE-build-key"/> > <package name="yast2-firstboot"/> > <package name="zypper"/> > -#if IS_FLAVOR_rapsberrypi > +#if IS_FLAVOR_raspberrypi This shouldn't be #if'ed in the first place. For armv7 we always add ntp now. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] armv5 kiwi support for oem images
by Guillaume Gardet 18 Oct '12

18 Oct '12

Hi, would it be possible to add armv5 kiwi support for oem images, please? With a quick look at the source code on : https://github.com/openSUSE/kiwi I guess we must create a system/boot/armv5tel/* (or armv5el?) using armv7l/* as template? Not sure if it is enough. I can do it if a kiwi guru (marcus?) give me some hints. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 10

[opensuse-arm] ARM powered servers
by Bernhard M. Wiedemann 17 Oct '12

17 Oct '12

http://www.phoronix.com/scan.php?page=article&item=calxeda_ubuntu_pre&num=1 describes quite powerful ARM hardware from Boston ltd/Calxeda. The specs make me think of former supercomputers. Ciao Bernhard M. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1