August 2004 - openSUSE Programming - openSUSE Mailing Lists

Re: [suse-programming-e] Tool chain fails to build
by dfg wijehf 21 Aug '04

21 Aug '04

Here are the spcific errors ( stuff got cut sorry about the inconvienece ). This is where it dies checking whether the C compiler ( /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/xgcc -B/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/ -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/ -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/ -isystem /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include -g -Os ) works... no configure: error: installation or configuration problem: C compiler cannot create executables. make[1]: *** [configure-target-libiberty] Error 1 make[1]: Leaving directory `/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final' make: *** [/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/.compiled] Error 2 linux:/home/sb/buildroot # This is what happens when I try to compile a simple hello.c program. linux:/home/sb/buildroot # /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/xgcc -v -B/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/ -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/ -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/ -isystem /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include -g -Os hello.c Reading specs from /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/specs Configured with: /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3.3/configure --prefix=/home/sb/buildroot/build_mipsel/staging_dir --build=i386-pc-linux-gnu --host=i386-pc-linux-gnu --target=mipsel-linux-uclibc --enable-languages=c --enable-shared --with-gxx-include-dir=/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include/c++ --disable-__cxa_atexit --enable-target-optspace --with-gnu-ld --disable-nls --enable-multilib Thread model: posix gcc version 3.3.3 /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/cc1 -quiet -v -iprefix /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/../lib/gcc-lib/mipsel-linux-uclibc/3.3.3/ -isystem /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/include -isystem /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/include -isystem /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/include -D__GNUC__=3 -D__GNUC_MINOR__=3 -D__GNUC_PATCHLEVEL__=3 -isystem /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include hello.c -quiet -dumpbase hello.c -auxbase hello -g -Os -version -o /tmp/ccaZGC1e.s ignoring nonexistent directory "/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/include" ignoring nonexistent directory "/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/include" GNU C version 3.3.3 (mipsel-linux-uclibc) compiled by GNU C version 3.3.1 (SuSE Linux). GGC heuristics: --param ggc-min-expand=98 --param ggc-min-heapsize=129109 ignoring nonexistent directory "/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/include" ignoring nonexistent directory "/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/sys-include" ignoring nonexistent directory "/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/include" ignoring duplicate directory "/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/sys-include" ignoring duplicate directory "/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include" #include "..." search starts here: #include <...> search starts here: /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/include /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/include End of search list. /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/as -EL -g0 -32 -v -KPIC -o /tmp/cc799Uxz.o /tmp/ccaZGC1e.s GNU assembler version 2.14.90.0.7 (mipsel-linux-uclibc) using BFD version 2.14.90.0.7 20031029 /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/collect2 --eh-frame-hdr -EL -dynamic-linker /lib/ld-uClibc.so.0 /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/crt1.o /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/crti.o /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/crtbegin.o -L/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc -L/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin -L/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib -L/home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3 -L/home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/lib /tmp/cc799Uxz.o -lgcc -lgcc_eh -lunwind -rpath-link /lib:/usr/lib -lc -lgcc -lgcc_eh -lunwind /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/crtend.o /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/crtn.o /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/ld: cannot find -lunwind collect2: ld returned 1 exit status linux:/home/sb/buildroot # _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now. http://promotions.yahoo.com/goldrush

1 0

Re: [suse-programming-e] Tool chain fails to build
by dfg wijehf 21 Aug '04

21 Aug '04

sorry accidently sent it to james instead of group --- dfg wijehf <lrwx(a)yahoo.com> wrote: > > --- James Oakley <joakley(a)solutioninc.com> wrote: > > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > On Thursday 19 August 2004 4:14 pm, dfg wijehf > > wrote: > > > I'm trying to build a toolchain for mipsel with > a > > > three stage cross compiler ( build gcc 3.3.3 > then > > gcc > > > 3.3.3-initial then gcc 3.3.3-final ). I'm using > > uclibc > > > (unimportant its not the problem) and binutils > has > > > compiled fine and works (no major errors). I'm > > using > > > SuSE 9.0 Pro. The final stage of the cross > > compiler ( > > > stage three ) dies with a random error. I've had > a > > > > Can you post the error? > > > > Interestingly enough, I'm building a mipsel glibc > > chain right now. > > > > - -- > > James Oakley > > Engineering - SolutionInc Ltd. > > joakley(a)solutioninc.com > > http://www.solutioninc.com > > > Here is the spcific error where it fails. > checking whether the C compiler ( > /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/xgcc > -B/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/ > -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/bin/ > -B/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/lib/ > -isystem > /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include > -g -Os ) works... no > configure: error: installation or configuration > problem: C compiler cannot create executables. > make[1]: *** [configure-target-libiberty] Error 1 > make[1]: Leaving directory > `/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final' > make: *** > [/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/.compiled] > Error 2 > linux:/home/sb/buildroot # > > Here's what happens when I try to compile a simple > hello.c program > > linux:/home/sb/buildroot # > /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/xgcc > -v hello.c > Reading specs from > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/specs > Configured with: > /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3.3/configure > --prefix=/home/sb/buildroot/build_mipsel/staging_dir > --build=i386-pc-linux-gnu --host=i386-pc-linux-gnu > --target=mipsel-linux-uclibc --enable-languages=c > --enable-shared > --with-gxx-include-dir=/home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include/c++ > --disable-__cxa_atexit --enable-target-optspace > --with-gnu-ld --disable-nls --enable-multilib > Thread model: posix > gcc version 3.3.3 > > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/cc1 > -quiet -v -iprefix > /home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/gcc/../lib/gcc-lib/mipsel-linux-uclibc/3.3.3/ > -D__GNUC__=3 -D__GNUC_MINOR__=3 > -D__GNUC_PATCHLEVEL__=3 hello.c -quiet -dumpbase > hello.c -auxbase hello -version -o /tmp/ccqD2z5L.s > GNU C version 3.3.3 (mipsel-linux-uclibc) > compiled by GNU C version 3.3.1 (SuSE > Linux). > GGC heuristics: --param ggc-min-expand=98 --param > ggc-min-heapsize=129109 > ignoring nonexistent directory > "/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/include" > ignoring nonexistent directory > "/home/sb/buildroot/toolchain_build_mipsel/gcc-3.3-final/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/include" > ignoring nonexistent directory > "/home/sb/buildroot/toolchain_build_mipsel/uClibc_dev/usr/local/include" > #include "..." search starts here: > #include <...> search starts here: > > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/include > > /home/sb/buildroot/build_mipsel/staging_dir/mipsel-linux-uclibc/include > > /home/sb/buildroot/toolchain_build_mipsel/uClibc_dev/usr/include > End of search list. > > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/bin/as > -EL -g0 -32 -v -KPIC -o /tmp/ccq2ihkM.o > /tmp/ccqD2z5L.s > GNU assembler version 2.14.90.0.7 > (mipsel-linux-uclibc) using BFD version 2.14.90.0.7 > 20031029 > > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/collect2 > --eh-frame-hdr -EL -dynamic-linker > /lib/ld-uClibc.so.0 > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/lib/crt1.o > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/lib/crti.o > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/crtbegin.o > -L/home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3 > -L/home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/lib > /tmp/ccq2ihkM.o -lgcc -rpath-link /lib:/usr/lib -lc > -lgcc > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/crtend.o > /home/sb/buildroot/build_mipsel/staging_dir/lib/gcc-lib/mipsel-linux-uclibc/3.3.3/../../../../mipsel-linux-uclibc/lib/crtn.o > linux:/home/sb/buildroot # > > If you need more information please tell me. > > > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > This e-mail is CONFIDENTIAL and contains > information > > intended only for the > > person(s) named. Any other distribution, copying > or > > disclosure is strictly > > prohibited. If you have received this e-mail in > > error, please notify me > > immediately at 902 420 0077 or reply by e-mail to > > the sender and destroy > > the original communication. > > Thank You. > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > -----BEGIN PGP SIGNATURE----- > > Version: GnuPG v1.2.4 (GNU/Linux) > > > > > iD8DBQFBJQB44U2uQswGyDcRAgPyAKC1Cr084A6ariyqEetYJITOLSoCMACgjTQg > > wa11CiksrtDMqfJStxGyMMo= > > =uqyE > > -----END PGP SIGNATURE----- > > > > -- > > To unsubscribe, email: > > suse-programming-e-unsubscribe(a)suse.com > > For additional commands, email: > > suse-programming-e-help(a)suse.com > > Archives can be found at: > > http://lists.suse.com/archive/suse-programming-e > > > > > > > > > > __________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - 100MB free storage! > http://promotions.yahoo.com/new_mail > __________________________________ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail

1 0

Rebuilding old source rpm packages on x86_64
by Michael Stevens 19 Aug '04

19 Aug '04

Hello All, I wondering if anyone here know enough about rpm system on SuSE and x86_64 to help with the following. In SuSE9.1 Professional 'lapack' is no-longer included. My usual approach to this is to take the source package from the previous version 9.0 and rpmbuild myself a new package. The tricky bit is I want to do this on an x86_64 machine running the 64bit compilers. I also need to produce both a standard x86_64 binary rpm as well as a i586 binary rpm. The later is equivalent to the '-32bit' packages in the distribution. The i586 binary is particularly hard. It seems that: a) You cannot simply use a binary rpm built on a 32bit version of SuSE9.1. b) When building on x86_64 machine I need to change the metadata. At the very least I need to pass '-m32' to gcc. If anyone has any documentation pointers in this direction I would be very grateful. Michael Stevens

2 2

Tool chain fails to build
by dfg wijehf 19 Aug '04

19 Aug '04

I'm trying to build a toolchain for mipsel with a three stage cross compiler ( build gcc 3.3.3 then gcc 3.3.3-initial then gcc 3.3.3-final ). I'm using uclibc (unimportant its not the problem) and binutils has compiled fine and works (no major errors). I'm using SuSE 9.0 Pro. The final stage of the cross compiler ( stage three ) dies with a random error. I've had a similar problem with gentoo save that it was easily fixed with "unset CC; unset GCC" ( doesn't work on this instance in SuSE ). I'm currently building from a x86 machine. I was curious if anyone is capable of shedding some light on the situation. (Don't tell me to switch to 9.1 it doesn't work either.) __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail

2 1

X-Window programming
by Colin Carter 18 Aug '04

18 Aug '04

Hi Gurus, Sorry to sound ignorant, but after 38 years of coding, little problems still bug me, as I am a beginner with Linux. I am running SuSE 9.1 Q1 When I try to compile and link a program the system says that the XWindow functions are not defined. That is, not found in the libraries. But I cannot find any documentation (in the masses of it) which tell me how to link. (I can manage the MS Windows API, but not the Linux.) Q2 I am running 64 bit Linux, but there appears to be no documentation about the arguments expected by SuSE XWindow. That is: are the normal 32 bit integers still 32 bit or change to 64 bit for function calls? More importantly, where is the documentation? Any help would be appreciated, especially a pointers into the documentation. I have a stack of books on Linux, and there is a million lines of information with which I am familiar with after 38 years of coding, but I cannot find the 'new' stuff required to transfer standard 32 bit Linux to 64 bit Linux, and I cannot find stuff which explains libraries. Kind regards, Colin Carter (colincarter(a)onetel.net.uk)

3 2

making a tabular appearance with kile or latex.
by Prabu Subroto 18 Aug '04

18 Aug '04

Dear my friends... I am not sure whether I may come up with this question in this mail-list. I am writing my cv with kile. I wan to make this appearance for my cv under below... " 1. Name : Prabu Subroto 2. Address : Jl.Kolong Langit/4 3. Sex : Male " I want to have the data with format the "." and ":" is in the stright line uptobuttom my cv and the other text may appear behind or front the "." or ":". I found the documentation in kile (Help menu) is far then enough. I am lacking of documentation to start working with kile (beginner). I found the "tabular", "tabular" and "multicoloum" but still don't understand make such format as I expect because the documentation has no example. I hope there is a volunteer to give me a solution. Please tell me. Thank you very much in advance. __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail

2 1

the behaviour of timestamp on postgres.
by Prabu Subroto 13 Aug '04

13 Aug '04

Dear my friends... I created some tables with field timestamp (datatype also timestamp). I mean, I want to have the data when each record inserted or modified in the tables. on MysQL, I just need to define the column (field) with datatype "timestamp" and that's all. each time new record inserted than the timestamp value will be inserted automaticall. also for the data modification, each time the data in the record modified than the value of timestamp column will be modified automatically. How is the behaviour of the timestamp on postgres? I have define the datatype of the column with "timestamp" but each time I inserted a new record into the table than the timestamp column (with datatype "timestamp") stays empty. How can I make the postgres complete the value of the timestamp field automatically? Please let me know. Thank you very much in advance. __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail

2 1

opening transaction...for postgres on Qt
by Prabu Subroto 11 Aug '04

11 Aug '04

Dear my friends... I am using Qt3.2, Postgres and SuSE 9.1 . I want to use "commit()" and "rollback()" mechanism for my database application. I defined my connection as underbelow: bd = QSqlDatabase::addDatabase("QPSQL7", "OTHER"); bd->setHostName("192.168.23.237"); bd->setDatabaseName("kv"); bd->setUserName("postgres"); bd->setPassword(""); bd->transaction(); if ( ! bd->open() ) { bd->lastError().showMessage(); } But if I execute my application, I find this error message in my linux console: patrixlinux@patrix:~/arsip/proyek/qt/kv/client> QPSQLDriver::beginTransaction: Database not open And I also can do any SQL Query. Where is my fault? Please tell me. Thank you very much in advance. __________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail

3 2

error: variable `QDate appdate' has initializer but incomplete type
by Prabu Subroto 11 Aug '04

11 Aug '04

Dear my friends... I am using Qt 3.2, SuSE 9.1 and Postgres 7.2 . I want to use QDate and QTime but I have this error message in comiling process: In file included from .ui/depanform.cpp:23: depanform.ui.h: In member function `virtual void depanForm::cariappSlot()': depanform.ui.h:150: error: variable `QDate appdate' has initializer but incomplete type depanform.ui.h:150: error: incomplete type 'QDate' cannot be used to name a scope depanform.ui.h:151: error: variable `QTime apptime' has initializer but incomplete type depanform.ui.h:151: error: incomplete type 'QTime' cannot be used to name a scope make: *** [.obj/depanform.o] Error 1 patrixlinux@patrix:~/arsip/proyek/qt/kv/client> Why is it so? I don't understand the meaning or the showed error message. Please explain it to me. Thank you very much. ===================== void depanForm::init() { workspace = new QWorkspace(this); workspace->setScrollBarsEnabled(true); setCentralWidget(workspace); t2 = new QTimer(); connect( t2, SIGNAL(timeout()), SLOT(cariappSlot()) ); t2->start( 6000, FALSE ); } void depanForm::cariappSlot() { bd = QSqlDatabase::addDatabase("QPSQL7", "OTHER"); bd->setHostName("192.168.23.237"); bd->setDatabaseName("kv"); bd->setUserName("postgres"); bd->setPassword(""); if ( ! bd->open() ) { bd->lastError().showMessage(); } int insid = 6; int jmlapp = 0; QDate appdate = QDate::currentDate(); QTime apptime = QTime::currentTime(); QString sqlcekapp = QString("select count(noapp) from appointment where salesid='%1' and date='%1' and time='%1'") .arg(insid) .arg(appdate.toString("yyyy-MM-dd")) .arg(apptime.toString("hh:mm")); QSqlQuery querycekapp(sqlcekapp); querycekapp.prepare(sqlcekapp); querycekapp.exec(); while ( querycekapp.next() ){ jmlapp = querycekapp.value(0).toInt(); } if (jmlapp > 0){ QMessageBox::warning(this, "Warning !", "You have an appointment"); } } __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail

1 0

Again the output format of QDate, addDays() and currentDate()
by Prabu Subroto 09 Aug '04

09 Aug '04

Dear my friends.. I am using qt, postgres and SuSE 9.1 . I am still confused how to use the QDate and QDateEdit. 1. How can I issue the current date with QDate. 2. I want to add the currectDate with some days (addDays() ). 3. I want to detemine the output of the QDateEdit to become "yyyy-MM-dd". Here what I've done: ============= QDate tgl; QDate appdate = tgl->currentDate(); if ( appdateEdit->isEnabled() ){ appdate = appdateEdit->date(); } else{ if ( hari1radioButton->isChecked() ){ appdate = tgl->addDays(1); } if ( minggu1radioButton->isChecked() ){ appdate = tgl->addDays(7); } if ( hari14radioButton->isChecked() ){ appdate = tgl->addDays(14); } if ( minggu4radioButton->isChecked() ){ appdate = tgl->addDays(28); } } QTime apptime = apptimeEdit->time(); QString warned = "N"; QString sqlapprep = QString("insert into appointment (noapp, custid, salesid, date, time,done, warned) values('%1', '%1', '%1', '%1', '%1', 'N', 'N')") .arg(noapp) .arg(cid) .arg(sid) .arg( appdate.toString("yyyy-MM-dd") .arg( apptime.toString ); =============== And here is the error message as I compiled my code: In file included from .ui/funonseqform.cpp:38: funonseqform.ui.h: In member function `virtual void funonseqForm::sendreportSlot()': funonseqform.ui.h:279: error: base operand of `->' has non-pointer type `QDate' funonseqform.ui.h:287: error: base operand of `->' has non-pointer type `QDate' funonseqform.ui.h:290: error: base operand of `->' has non-pointer type `QDate' funonseqform.ui.h:293: error: base operand of `->' has non-pointer type `QDate' funonseqform.ui.h:296: error: base operand of `->' has non-pointer type `QDate' make: *** [.obj/funonseqform.o] Error 1 patrixlinux@patrix:~/arsip/proyek/qt/kv/client> ======== Please tell me where my mistake. Thank you very much in advance. __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail

1 0