- openSUSE ARM

[opensuse-arm] gcc for aarch64
by Alexander Graf 01 Jun '12

01 Jun '12

Hi guys, I just learned from Peter that the AArch64 (armv8) port of gcc went public: http://old.nabble.com/-AARCH64---PATCH-0-3--AArch64-Port-td33907309.html This doesn't mean we can compile aarch64 code yet, as we're still lacking binutils to generate binary output from the assembly, but we're getting closer. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] kernel-tegra?
by Andreas Färber 01 Jun '12

01 Jun '12

Hello, Has anyone been successful in using the kernel-tegra package? I tried with the following Android boot image: ${DIR}/abootimg --create opensuse-tegra.img -c "name=kernel-tegra" \ -c "cmdline=mem=448M@0M console=tty0 tegraboot=sdmmc tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800 root=/dev/mmcblk1p1 rw rootwait" \ -c "kerneladdr=0x10008000" -c "ramdiskaddr=0x11000000" -c "tagsaddr=0x10000100" \ -k uImage-3.4.0-1-tegra -r initrd.cpio.gz where uImage-... is from the openSUSE:Factory:ARM kernel-tegra .rpm and initrd.cpio.gz is the same as for Joop's kernel-tegra-ac100 and the addresses are from my previous Ubuntu kernel. With this flashed, I just got a blank screen on my AC100. I wonder if we need to change the kernel config for it to build a zImage, too? Or might the above addresses be wrong for our kernel? Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] xorg install problems
by Peter Czanik 30 May '12

30 May '12

Hello, Trying to install Xorg on my EFIKA I ran into a couple of problems. First I was surprised to see, that xorg is not installed with patterns-openSUSE-x11. Then I tried to add it to the zypper command line by hand. Then I got the following missing requirements: Problem: nothing provides xf86-input-vmmouse needed by xorg-x11-driver-input-7.6_1-1.1.noarch Problem: nothing provides intel-gpu-tools needed by xorg-x11-driver-video-7.6_1-2.1.noarch I guess, my install will be functional without these :) Once checked, what is the preferred way of fixing it? Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 9

[opensuse-arm] ARM kernels not building
by Guillaume Gardet 29 May '12

29 May '12

Hi, ARM kernel do not build because of arch modification (armv7l => armv7hl): ********* tar: config/armv7hl/omap2plus: Not found in archive tar: Exiting with failure status due to previous errors error: Architecture is not included: armv7hl ********* Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] image building broken
by Alexander Graf 29 May '12

29 May '12

Howdy, somehow image building got broken in OBS. The easiest case - a root tarball - doesn't even build: https://build.opensuse.org/package/live_build_log?arch=armv7l&package=JeOS&… It fails with the following errors: + /usr/bin/zypper --non-interactive --no-gpg-checks --reposd-dir /var/cache/kiwi/zypper/repos --cache-dir /var/cache/kiwi/zypper --config /var/cache/kiwi/zypper/zypper.conf.2329 --root /usr/src/packages/KIWIROOT-tbz install --auto-agree-with-licenses --no-recommends aaa_base cracklib-dict-full dhcpcd filesystem glibc-locale hwinfo ifplugd insserv iputils kbd less lvm2 mkinitrd module-init-tools netcfg openssh polkit procps pwdutils qemu-linux-user-arm rpcbind rpm rsyslog sysconfig systemd-sysvinit u-boot-tools vim zypper + SPID=2566 + wait 2566 Loading repository data... Repository 'usr_src_packages_SOURCES_repos_openSUSE:Factory:ARM_standard' not cached. Caching... Building repository 'usr_src_packages_SOURCES_repos_openSUSE:Factory:ARM_standard' cache [....done] Reading installed packages... 'rpm' not found in package names. Trying capabilities. No provider of 'rpm' found. 'aaa_base' not found in package names. Trying capabilities. No provider of 'aaa_base' found. 'glibc-locale' not found in package names. Trying capabilities. No provider of 'glibc-locale' found. 'systemd-sysvinit' not found in package names. Trying capabilities. No provider of 'systemd-sysvinit' found. This smells like a configuration mismatch between Factory and Factory:ARM to me. Could anyone with a bit more insight look at this please? Thanks a lot! Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] None pre-built images available
by endym 29 May '12

29 May '12

Hi, since some days there are none pre-built images available here: <http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/>. Is there something planned for the next time? Regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Re: [opensuse-factory] OpenJDK7 is going to Factory
by Michal Vyskocil 21 May '12

21 May '12

On Fri, May 18, 2012 at 04:59:02PM +0200, Duncan Mac-Vicar P. wrote: > On 05/10/2012 01:29 PM, Michal Vyskocil wrote: > >Hallo all, > > > >as you might know, Oracle have announced the end of general support for > >jdk6 in November 2012. In order to have maintenable system, we have to > >follow and switch to jdk7 as well. > > > >I have just sumbitted the java-1_7_0-openjdk to Java:openjdk6:Factory - > >this release is based on icedtea-2.1, openjdk b147 and should be an > >equivalent of Oracle Java 7 u2. There are two minor problems preventing > >the succesfull submit into Factory > > > > * it has to be rebuilt using java-1_7_0-openjdk > > * BuildRequires: -brp-check-suse and BuildRequires: > > -post-build-checks are not things Factory checking team would accept > > > >I hope I will fix them this week and submit openjdk7 to Factory soon. > > > >The next step would be rebuild of all java packages with jdk7 and fix > >possible problems, but this will be a task for time, when openjdk7 will > >be done. > > > >Best regards > >Michal Vyskocil > Hallo Duncan, > Michal, do you think we can enable jamvm as a vm flavor as Debian > and Ubuntu did? (and AFAIK they use it as a default for arm) atm my priority #1 is to get openjdk7 to Factory for x86_64/i586, #2 is fix build problems in Java:packages:JDK7 and push them into Factory as well (it includes some updates into our old java stack). So arm is not what I can work at least until 12.2. > > By the way, they seem to have a better package naming convention for > that: icedtea-7-jre-jamvm (splits as a subpackage and only contains > the libjvm.so) Sure, but the other point is the debian's "spec" file is way more comlicated than our current one ;-). BTW: if there is someone in opensuse-arm want to work on that, don't hesitate to contact me. Best regards Michal Vyskocil -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Trigger packages rebuild
by Guillaume Gardet 19 May '12

19 May '12

Hi, would it be possible to trigger a rebuild of kernel-source and kernel-syms so that the version matches the other ARM kernel version, please? Currently we have: * kernel-devel: 3.4.rc6-1.1 * kernel-syms: 3.4.rc6-1.1 which does not match: * kernel-omap2plus: 3.4.rc6-2.1 * kernel-imx51: 3.4.rc6-2.1 etc. So, we are not able to build kernel drivers, due to missing kernel-syms and kernel-devel. Regards, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] no ARM kernel in OBS
by Guillaume Gardet 16 May '12

16 May '12

Hi, ARM kernel build was disabled in conf file in the GIT repo some times ago. ARM kernel build is again enabled and have been pushed to Factory but there are no kernel-* for ARM (kernel-omap2plus, etc.) in Factory OBS. Is there something to do in OBS? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 4

[opensuse-arm] Rebuild of openSUSE:Factory:ARM strigi request
by Joop Boonen 16 May '12

16 May '12

Hi, Can the following package (openSUSE:Factory:ARM strigi ) please be rebuild for standard armv7l. This package build fine on my system in qemu. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1