- openSUSE ARM

Re: [opensuse-arm] injecting arm packages
by Adrian Schröter 17 Oct '11

17 Oct '11

Am Sonntag, 16. Oktober 2011, 20:29:38 schrieb Andrew Wafaa: > Michal has also been able to build gtk2 on native hardware too. I injected gtk2 a while ago. I am currently injecting a texlive build from Alexander. > Could we add > these to the list of packages to inject? When building with Qemu gtk2 > repeatedly causes a segfault and fails to build. At some point we need to fix the build or we can not ever make an ARM distribution release. No matter what the reason of this failure is. bye adrian > Regards, > > Andy > > -- > Sorry for top posting > > Andrew Wafaa > IRC: FunkyPenguin > GPG: 0x3A36312F > > On 16 Oct 2011 19:49, "Alexander Graf" <agraf(a)suse.de> wrote: > > Hi Adrian, > > > > We have a couple of pretty core packages that I can build just fine with > > native hardware, but did not manage to build with QEMU yet (namely, > > texlive-bin and yast2-core). However, since I can build them just fine > > on > > hardware, I can easily produce working rpms. > > > > Can we inject those rpms into the repository and with that at least > > continue building something we can then later on base a worker image on > > so we can then build everything natively? > > > > > > Alex > > > > -- > > To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org > > To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de

3 3

[opensuse-arm] injecting arm packages
by Alexander Graf 16 Oct '11

16 Oct '11

Hi Adrian, We have a couple of pretty core packages that I can build just fine with native hardware, but did not manage to build with QEMU yet (namely, texlive-bin and yast2-core). However, since I can build them just fine on hardware, I can easily produce working rpms. Can we inject those rpms into the repository and with that at least continue building something we can then later on base a worker image on so we can then build everything natively? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] iproute2 build without pdf documentation for once, as texlive-latex is broken?
by Joop Boonen 14 Oct '11

14 Oct '11

I have a request. iproute2 is a crucial package to install sysconfig. iproute is not build because of an issue with texlive-latex. This package is needed to generate the pdf files. (make pdf) I don't know if it's allowed for once to build this package just once without documentation in openSUSE:Factory:ARM, so openSuSE ARM can be tested with sysconfig? Can the "patch" please be applied once, in openSUSE:Factory:ARM, and rolled back after the package has been build and published? <diff> osc diff Index: iproute2.spec =================================================================== --- iproute2.spec (revision 86ae9170e809de093551e2286d24a5ba) +++ iproute2.spec (working copy) @@ -41,7 +41,8 @@ BuildRequires: libpng-devel libtiff-devel pkgconfig >= 0.19 BuildRequires: xorg-x11-devel xz %if 0%{?suse_version} -BuildRequires: ghostscript-x11 sgmltool texlive-latex +BuildRequires: ghostscript-x11 sgmltool +#BuildRequires: ghostscript-x11 sgmltool texlive-latex %endif %if 0%{?fedora} || 0%{?rhel} BuildRequires: ghostscript linuxdoc-tools sgml-common tetex-dvips tetex-latex @@ -94,7 +95,7 @@ xtlibdir="$(pkg-config xtables --variable=xtlibdir)"; make %{?_smp_mflags} LIBDIR=%_libdir CCOPTS="-D_GNU_SOURCE %optflags -Wstrict-prototypes -fPIC -DXT_LIB_DIR=\\\"$xtlibdir\\\"" cd doc -make pdf +#make pdf %install install -d %buildroot/{etc/,sbin/,usr/{sbin,share/man/man{3,8}}} @@ -125,8 +126,8 @@ %files doc %defattr(-,root,root) -%doc doc/api-ip6-flowlabels.pdf doc/arpd.pdf doc/ip-cref.pdf -%doc doc/ip-tunnels.pdf doc/nstat.pdf doc/rtstat.pdf doc/ss.pdf +#%doc doc/api-ip6-flowlabels.pdf doc/arpd.pdf doc/ip-cref.pdf +#%doc doc/ip-tunnels.pdf doc/nstat.pdf doc/rtstat.pdf doc/ss.pdf %doc ChangeLog examples/ ip/ifcfg ip/routef ip/routel %files -n libnetlink-devel </diff> Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 3

[opensuse-arm] openSUSE got hardware!
by Dirk Müller 14 Oct '11

14 Oct '11

Hi, What a nice surprise, we got a set of genesi Efika MX today: http://www.suse.de/~dmueller/efikamx/efikamx2.jpeg These are two standalone computer, and two smartbook/netbook like laptops. We've already set them up and just started package building on it. They're not yet connected to the external build service, this will come over the next weeks when Adrian is back. Thanks a lot! Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Getting the correct kernel
by Andrew Wafaa 13 Oct '11

13 Oct '11

I know one of the reasons we chose a single target for hardware was to make the job of getting the right kernel and associated modules somewhat easier. Now (un)fortunately, we have some kind sponsors of hardware Genesi with the Efika MX and Pandaboard.org with the PandaBoard. How difficult would it be to have a single kernel that supports both these devices? I've had a sniff on the web and have found a kernel repo for EfikaMX[0] and PandaBoard[1], there is also the Linaro kernel[2] which I believe supports them; nice to have would be the BeagleBoard too. I believe they should all be supported in upstream but I can't say for certain, saying that though I believe the EfikaMX needs the siihdmi driver pushing upstream for the 3.x kernel. I have a contact to push about this and will chase him up later today. Regards, Andy 0=http://gitorious.org/efikamx/linux-kernel 1=http://gitorious.org/pandaboard/kernel-mainline 2=http://git.linaro.org/gitweb?p=kernel/linux-linaro-3.1.git;a=summary -- Andrew Wafaa IRC: FunkyPenguin GPG: 0x3A36312F -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] debian for native builds
by Peter Czanik 13 Oct '11

13 Oct '11

Hello, How can I use Debian for native builds? I have the Debian ARM HF running on my EFIKA smartbook. It also has "osc" installed, but when I try to build something, it complains, that build is not available. Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] hwinfo of the PandaBoard booted with openSuSE ARM
by Joop Boonen 12 Oct '11

12 Oct '11

Hi all, For who are interested. This is the hwinfo , /proc/cpuinfo and /proc/meminfo output of the PandaBoard booted with openSuSE ARM. Regards, Joop.

1 0

[opensuse-arm] Just got the openSuSE ARM port running on the Pandaboard
by Joop Boonen 12 Oct '11

12 Oct '11

Hi All, I just got a basic openSuSE ARM port, OBS build armv7hl packages openSuSE packages, running on the Pandaboard. I used mic2, the script that is used for MeeGo. I had to patch 2 things one for the password and one as not all packages are available yet. Otherwise the mic2 build would stop because of a raise. I used these MeeGO panda instructions: http://wiki.meego.com/ARM/OMAP4_Panda I used a adapted Panda.ks.in and Panda.sh file, I've attached these files. MLO & u-boot was build according to: http://elinux.org/Panda_How_to_MLO_%26_u-boot I've attached all files. Regards, Joop. I've also posted 2 videos on you-tube: http://www.youtube.com/watch?v=bf5zKT2gWKs http://www.youtube.com/watch?v=FMziSoonpTU

1 0

[opensuse-arm] All JeOS packages according kiwi (suse-11.4-JeOS)
by Joop Boonen 10 Oct '11

10 Oct '11

Hi all, This are all packages that have been installed for kiwi image template suse-11.4-JeOS . These packages except grub and pciutils will also be needed for a basic arm install. It might be best to focus on fixing these packages first? So we can get a running machine faster and start testing on the Pandaboard. What do you all think? Regards, Joop.

5 7

[opensuse-arm] ipfire port to ARM
by Bill Merriam 08 Oct '11

08 Oct '11

It looks like you guys are doing very well with the port and probably don't need help but I decided to tell you about this distro that just did an ARM port. ipfire is based on Linux From Scratch, do they don't use RPM. Their announcement is here. http://www.ipfire.org/news/ipfire-2.11-available-on-arm The mailing list where they talk about the port is here. http://lists.ipfire.org/pipermail/sig-arm/ Their GIT repository with the ARM patches is here. I suppose we could shamelessly look at how they did it. http://git.ipfire.org/?p=people/ms/ipfire-2.x.git;a=shortlog;h=refs/heads/a… Since they started with a different software base I don't think the patches would be directly usable but if somebody is having trouble with a particular package you could look to see how they did it. I think we would thank them if we did that. Bill -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0