June 2018 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Problem running python script using GPIO
by Freek de Kruijf 15 Jun '18

15 Jun '18

I am using a Raspberry Pi 1B to count some pulses on one of the GPIO pins, using Python script. This script runs fine on an older version of Tumbleweed, namely 20160625. When I run my script on the current version, 20180502, it throws an error message: GPIO.add_event_detect(PIN, GPIO.FALLING, callback=cb, bouncetime=100) RuntimeError: Failed to add edge detection I found a message from Frank Kunz about using the pins via sysfs, of which I have the feeling this related. Maybe not! The solution that was mentioned was installing the pinmux driver. However I can't find such a thing. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 7

[opensuse-arm] Debugging 64-bit systems on the Raspberry Pi
by Petr Tesarik 14 Jun '18

14 Jun '18

Hi all, this is JFYI. I had some success with hardware debugging of a RPi3 board using JTAG, and some people thought it's worth sharing how I did it. If you're interested, details are described in this blog article: https://www.suse.com/c/debugging-raspberry-pi-3-with-jtag/ Petr T -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Factory/Tumbleweed for ARM: gcc8 rebuild running
by Dirk Müller 12 Jun '18

12 Jun '18

Hi, as of this monday morning we have gcc8 in Factory:ARM (it entered x86 end of last week). a full rebuild of aarch64 and armv7l with that compiler is running, expect some delays in the publish of the next snapshot. hopefully this is finished by the end of this week. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Tumbleweed images for Raspberry Pi 3B and 3B+
by Cor Slot 08 Jun '18

08 Jun '18

Hi When will new Tumbleweed images be published for Raspberry Pi 3 (3B, 3B+)? Images on http://download.opensuse.org/ports/aarch64/tumbleweed/images/ are dated Feb 02, 2018 and don't work on the 3B+. Or can I use an alternative method to install Tumbleweed on a 3B+? (how?) Thanks. Cheers, Cor. suse(a)vger.net -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 10

[opensuse-arm] rock64
by Mark Petersen 06 Jun '18

06 Jun '18

Hello, I'm trying to get openSUSE running on my rock64 2GB SBC. I've tried to follow the HCL guide from here: https://en.opensuse.org/ HCL:Rock64 but things must have changed in the github repo. There are no rpm's in the repo so the rest of the process doesn't work. I used xzcat/dd to write the image to both emmc & sd from here: http:// download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rockchip/ images/openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2018.05.24-Build5.1.raw.xz but the board won't boot. I don't get any output on the serial console. Could someone provide some guidance? Thanks. Mark -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 6

Re : Re: [opensuse-arm] Tests of ARM Leap 15.0
by guillaume.gardet＠free.fr 06 Jun '18

06 Jun '18

Hi Paul, ----- Paul Gonin <paul.gonin(a)gmail.com> a écrit : > Hi Guillaume, > > Where is the Leap15 image for pine64 ? There is no Leap 15 image for Pine64. Guillaume > > Thanks > Paul > > Le mar. 5 juin 2018 à 12:37, Guillaume Gardet <guillaume.gardet(a)free.fr> a > écrit : > > > Hi, > > > > here are some results of my tests of Leap 15.0 images. > > * JeOS-beagle : OK. (DVI output not working on BBxM, as on Tumbleweed) > > * JeOS-beaglebone: OK on BB Black. HDMI not tested. > > * XFCE-raspberrypi2: OK > > * XFCE-sabrelite : USB not working (fine in TW), only 1/4 of the screen is > > used for display (same in TW), otherwise ok. => not blocking since Ethernet > > is working and will allow updates. > > * KDE-chromebook: (not built, JeOS needs to be updated) u-boot ok, but get > > a black screen then, no repartition happened (same in latest TW). > > > > openQA looks fine: > > https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.0&bui… > > * Firefox problem is fixed in devel and Factory. Should be released to > > Leap:15.0 through updates. > > * Gnome terminal problem is an openQA problem (color font mismatch) > > > > If people could also share there tests, it would help to decide when we > > could release Leap 15.0 for ARM. :) > > > > > > Guillaume > > > > > > -- > > To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org > > To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org > > > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0