September 2017 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] http://download.opensuse.org/ports/aarch64/debug/tumbleweed is missing
by Andreas Schwab 11 Mar '18

11 Mar '18

... and the last published snapshot is Build20170831. This may be related. Andreas. -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] rock64
by Matwey V. Kornilov 10 Mar '18

10 Mar '18

Hello, I will receive my rock64 board soon. https://www.pine64.org/?page_id=7147 I would like to run some openSUSE on it. There are no upstream support but lets see what we could do. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

8 58

[opensuse-arm] [aarch64] TW on Pinebook?
by Alex Naumov 12 Dec '17

12 Dec '17

Hello, yesterday I finally got my 14'' Pinebook [1]. There is Ubuntu 16.04 MATE as a default OS, but I would like to use openSUSE TW on it of course. So, I found raw.xz XFCE-image for aarch64 [2] and used this command "to burn" image on the microSD card: # unxz -c openSUSE-Tumbleweed-ARM-XFCE-efi.aarch64-2017.06.10-Build2.3.raw.xz | sudo dd of=/dev/mmcblk1p No success. Pinebook tried to boot from microSD card, but... it seems that there is something wrong with bootloader. Here [3] I found this command: # xzcat openSUSE-Tumbleweed-ARM-XFCE-efi.aarch64-2017.06.10-Build2.3.raw.xz | dd bs=4M of=/dev/ mmcblk1p oflag=sync Exactly the same... image is there, echo $? tells 0, but pinebook ignore it. Image on microSD card is marked as a bootable. I checked it with parted(8). I asked Google and it showed me this [4]. This is HOWTO for fedora 21 on Cubietruck, but there is one interesting thing: step (4) Write U-Boot to Media. Do we also need to install bootloader extra? Because, as I said, for me it seems like a bootloader problem. If yes, where is this script or documentation about it? Also I would ask about rootfs-images. Do we have some information/HOWTOs about these? Cheers, Alex [1] https://www.pine64.org/?page_id=3707 [2] http://download.opensuse.org/ports/aarch64/tumbleweed/images/openSUSE-Tumbl… [3] https://en.opensuse.org/HCL:AArch64_EFI [4] https://kashyapc.fedorapeople.org/arm/installing-Fedora-21-on-microSD-card-… -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 7

[opensuse-arm] Samsung Chromebook (Snow) status?
by Daniel Bischof 20 Nov '17

20 Nov '17

Hi, I tried openSUSE-Tumbleweed-ARM-XFCE-chromebook.armv7l-2017.07.22-Build1.1 recently, but it just beeps and kicks me back to the boot screen immediately. No messages on screen, partition resizing, etc. Any hints? Some cgpt magic I could try from ChromeOS perhaps? Best regards, --D. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 10

[opensuse-arm] JeOS-2017-03-13 image for RPi 1 installs OK, Grub fails on reboot
by Alex Armstrong 14 Nov '17

14 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings, I was testing: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2017.03.13-Build1.8.raw.xz from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ras… On RaspberryPi 1 Model B It installs fine - expands the file system, creates the dracut based init and boots to a usable system. But when I reboot, grub fails with: error: attempt to read or write outside of partition. and drops me to the grub rescue system. Poking around the rescue system, I've found that I can see 4 partitions, one which is ext2 and has the normal Linux files. From here, most of the recovery guides say to set the root and prefix variables and then load the normal module. I can execute the commands: set root=(hd0,gpt2) set prefix=(hd0,gpt2)/boot/grub2 and list the files in the various directories - normal.mod exists in /boot/grub2/arm-efi/ - but when I try: insmod normal I still get the error: attempt to read or write outside of partition. Somewhat interestingly, if I miss-type the prefix (say; /boot/grub) the error changes to a "file not found" one. I was hoping someone might have some ideas about what to try next. - -Alex -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAljUJnYACgkQYZYc2javKOllFQCeNiB6oZYpnKxgmKsbdUtcQNrO mOIAoJBXe8913EIzBfD04P/PqfPjFv9e =ZZC3 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 9

[opensuse-arm] https://kernelci.org/
by Loic Devulder 22 Sep '17

22 Sep '17

Hi! For those who don't know, interesting QA site for Linux kernel: https://kernelci.org/ Lot of ARM boards are used! :) Loic -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] vcgencmd for openSUSE
by Roger Oberholtzer 22 Sep '17

22 Sep '17

Is there an equivalent command to vcgencmd on openSUSE for the Raspberry Pi 3 (64-bit)? http://www.elinux.org/RPI_vcgencmd_usage I see some discussion at https://github.com/Hexxeh/rpi-update/issues/220 -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Khadas VIM2 Max TV Box
by Loic Devulder 22 Sep '17

22 Sep '17

Hi all! Sounds a very interesting card: https://www.gearbest.com/tv-box/pp_676880.html?lkid=10642329 64GB of eMMC for this price is not too bad, as 3GB of RAM too (4GB could have been better :-p). According to the specs this card has UEFI boot, it would be good to try to install UEFI aarch64 version :-) Just need to see the status of S912 SoC in the mainline kernel (at least in the openSUSE kernel). Now I still don't know what to choose between Rock64 and this one... -- Loic -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 8

[opensuse-arm] Upgrade of openSUSE Tumbleweed on RPI1 fails
by Freek de Kruijf 18 Sep '17

18 Sep '17

I used the latest JeOS image 2017.05.23-Build1.1 for the RPi1 (armv6l) on a SD card and booted the system, which went OK. After that I did a "zypper dup --no-recommends" on that system which, at the end, shows the following message: Output of grub2-arm-uboot-2.02-6.1.armv6hl.rpm %posttrans script: update-bootloader: 2017-09-04 11:31:09 <3> update-bootloader-1244 run_command.274: '/usr/lib/bootloader/grub2-efi/install' failed with exit code 1, output: <<<<<<<<<<<<<<<< target = arm-efi ls: cannot access '/sys/firmware/efi/efivars': No such file or directory + /usr/sbin/grub2-install --target=arm-efi --no-nvram --removable Installing for arm-efi platform. /usr/sbin/grub2-install: error: cannot find a GRUB drive for /dev/ mmcblk0p2. Check your device.map. >>>>>>>>>>>>>>>> However /dev/mmcblk0p2 does exist as shows the following output of "df -h" # df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 176M 8,0K 176M 1% /dev tmpfs 201M 0 201M 0% /dev/shm tmpfs 201M 372K 200M 1% /run /dev/mmcblk0p2 3,0G 1,2G 1,7G 41% / /dev/mmcblk0p1 200M 3,7M 197M 2% /boot/efi tmpfs 201M 0 201M 0% /sys/fs/cgroup tmpfs 41M 0 41M 0% /run/user/0 File a bug report? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 17

[opensuse-arm] Leap/Tumbleweed DVD installation Raspberry Pi 3
by Loic Devulder 15 Sep '17

15 Sep '17

Hi guys! For those who want to do a fresh DVD installation on their Raspberry Pi 3, I have updated the wiki page with the procedure I use to do this: https://en.opensuse.org/HCL:Raspberry_Pi3 I hope that there isn't lot of mistake in my howto :) Thanks to Alex for his help! Regards, Loic -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0