June 2017 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] JeOS-2017-03-13 image for RPi 1 installs OK, Grub fails on reboot
by Alex Armstrong 14 Nov '17

14 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings, I was testing: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2017.03.13-Build1.8.raw.xz from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ras… On RaspberryPi 1 Model B It installs fine - expands the file system, creates the dracut based init and boots to a usable system. But when I reboot, grub fails with: error: attempt to read or write outside of partition. and drops me to the grub rescue system. Poking around the rescue system, I've found that I can see 4 partitions, one which is ext2 and has the normal Linux files. From here, most of the recovery guides say to set the root and prefix variables and then load the normal module. I can execute the commands: set root=(hd0,gpt2) set prefix=(hd0,gpt2)/boot/grub2 and list the files in the various directories - normal.mod exists in /boot/grub2/arm-efi/ - but when I try: insmod normal I still get the error: attempt to read or write outside of partition. Somewhat interestingly, if I miss-type the prefix (say; /boot/grub) the error changes to a "file not found" one. I was hoping someone might have some ideas about what to try next. - -Alex -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAljUJnYACgkQYZYc2javKOllFQCeNiB6oZYpnKxgmKsbdUtcQNrO mOIAoJBXe8913EIzBfD04P/PqfPjFv9e =ZZC3 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 9

[opensuse-arm] Larger number of rebuilds for openSUSE:Leap:42.3:Ports
by Dirk Müller 26 Jun '17

26 Jun '17

Hi, in order to recover from the gcc7 runtime switch in Leap:42.3 that happened somewhen end of last weeks I need to do a couple of coordinated rebuilds, that's gonna take the next few days. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Custom Raspberry PI3 kernel modules
by Roger Oberholtzer 26 Jun '17

26 Jun '17

I am looking at making a custom Raspberry PI3 kernel module that needs to deal with the various I/O pins. I need a driver because the activity is quite high. So a python or other high-level interface will not be possible. It will most likely do the majority of work in the driver's interrupt routine that, I hope, can be called when a pin or pins change state. My questions are: 1. Has anyone experienced any difficulties with making custom drivers on openSUSE running on the Pi3? 2. Are there any drivers that are being loaded by openSUSE that fiddle with the I/O lines that I may need to disable? Currently, nothing is connected to the I/O lines. 3. Any suggestions of a good driver to perhaps look at for this kind of I/O interface? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] go for armv7
by Matwey V. Kornilov 22 Jun '17

22 Jun '17

Hello, We need a plan to return go (and derived packages) to armv7 arch. AFAIK, currently, there is an issue with bootstrapping go build with gcc (which just hungs). -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] CPU1: failed to come online
by Matwey V. Kornilov 21 Jun '17

21 Jun '17

Hello, I am running Leap 42.2 on Raspberry Pi 3 and trying to user qemu-kvm for OBS worker. Currently, I can not run guests with more that single CPU. Both using libvirt and using obsworker, I see 'CPU1: failed to come online'. [ 28s] booting kvm... [ 28s] ### VM INTERACTION START ### [ 28s] /usr/bin/qemu-system-aarch64 -nodefaults -no-reboot -nographic -vga none -enable-kvm -cpu host,aarch64=off -M virt,gic-version=host -object rng-random,filename=/dev/hwrng,id=rng0 -device virtio-rng-device,rng=rng0 -runas qemu -net none -M virt,gic-version=2 -kernel /var/cache/obs/worker/root_1/.mount/boot/kernel -initrd /var/cache/obs/worker/root_1/.mount/boot/initrd -append root=/dev/disk/by-id/virtio-0 rootfstype=ext3 rootflags=data=writeback,nobarrier,commit=150,noatime panic=1 quiet no-kvmclock nmi_watchdog=0 rw rd.driver.pre=binfmt_misc elevator=noop console=ttyAMA0 init=/.build/build -m 768 -drive file=/var/cache/obs/worker/root_1/root,format=raw,if=none,id=disk,serial=0,cache=unsafe -device virtio-blk-device,drive=disk -drive file=/var/cache/obs/worker/root_1/swap,format=raw,if=none,id=swap,serial=1,cache=unsafe -device virtio-blk-device,drive=swap -serial stdio -smp 2 [ 31s] [ 1.147658] CPU1: failed to come online [ 32s] [ 1.174458] socfpga_setup_ocram_self_refresh: Unable to find mmio-sram in dtb [ 34s] [ 4.059330] sr_init: platform driver register failed for SR [ 34s] [ 4.060566] Unable to find PPMU node [ 36s] [ 5.512390] dracut-pre-udev[161]: modprobe: FATAL: Module kqemu not found. [ 37s] [ 7.285749] dracut-pre-udev[161]: modprobe: FATAL: Module virtio_pci not found. [ 38s] [ 7.453945] dracut-pre-udev[161]: modprobe: FATAL: Module ibmvscsi not found. [ 38s] [ 7.483033] dracut-pre-udev[161]: modprobe: FATAL: Module e1000 not found. [ 38s] [ 7.498808] dracut-pre-udev[161]: modprobe: FATAL: Module ibmveth not found. [ 41s] ### VM INTERACTION END ### [ 41s] 2nd stage started in virtual machine -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] Enabling WiFi on RPi3
by Freek de Kruijf 19 Jun '17

19 Jun '17

Last year I was able to enable WiFi on my RPi3. The problem at that moment was the unavailable firmware files. These files are now available in Tumbleweed, however I can't find how to load these files in order to have a wlan0 device. I found a script /usr/sbin/install-brcmfmac, but I can't find how and where this script is called. It puts a symbolic link is some folder, but what folder? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 5

[opensuse-arm] openSUSE:Factory:ARM: armv7l: __spawnix: Assertion `ec >= 0'
by Matwey V. Kornilov 19 Jun '17

19 Jun '17

Hello, There are bad thing with glibc in Factory. Every other package fails with the following message: ../sysdeps/unix/sysv/linux/spawni.c:360: __spawnix: Assertion `ec >= 0' failed. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Re: filesystem package broke Base:System for aarch64 - system-users circular dependency
by Andreas Schwab 18 Jun '17

18 Jun '17

On Jun 12 2017, Marcus Meissner <meissner(a)suse.de> wrote: > I try to fix it up ppc has the same problem. Andreas. -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Aarch64 openQA workers are broken
by Stefan Bruens 17 Jun '17

17 Jun '17

Hi, obviously the os-autoinst package installed on the workers has been built against perl 5.24.*1*, while the installed perl is 5.24.0. As a result, perl does not find the tinycv.pm module and fails to start. Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 work: +49 2405 49936-424 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
by Matwey V. Kornilov 15 Jun '17

15 Jun '17

Hello, Could somebody please tell me whether raspberrypi2 image supposed to work on raspberrypi3 in armv7 mode? I've just tried but I don't see anything on serial console, even u-boot messages. Is it the image broken? I don't have raspberrypi2 to test. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 11