February 2017

[opensuse-arm] nanopi neo air ?
by Per Jessen 30 Apr '17

30 Apr '17

Has anyone been playing with one of these? I'm not making much progress myself - eventually I'd like to get openSUSE running of course, but for starters, I'm just trying with the ubuntu core from http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Air The device seems to be booting (blue light flashing), but it's not picking up an IP-address from dhcp. -- Per Jessen, Zürich (6.7°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse-arm+… [View More]

4 19

[opensuse-arm] Attempt to run KIWI on unsupported architecture 'armv8l'
by Dirk Müller 12 Apr '17

12 Apr '17

Hi, this is a known OBS bug, asked the admins to deploy a fix shortly. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Missing packages in repos aarch64 openSUSE leap 42.2
by Curtin, Eric 03 Mar '17

03 Mar '17

Hi Guys, We have been using your raspberry pi 3 image for a couple of weeks as a test device instead of some more expensive aarch64 hardware that we will use in production. Long story short, there are some missing packages in your repos (I think rsync is one that springs to mind). Any idea when these packages will become available, anything I can do to help? p.s. thanks for being the first to create an easily installable 64 bit distro for the raspberry pi 3! -- To unsubscribe, e-mail: … [View More]

3 4

[opensuse-arm] cross-armv7hl-gcc6 package
by Guillaume Gardet 28 Feb '17

28 Feb '17

Hi, in cross-armv7hl-gcc6 package, we get all the cross build tools, but with the gcc version appended. So, we have armv7hl-suse-linux-gnueabi-gcc-6 instead of armv7hl-suse-linux-gnueabi-gcc. This is a problem to build things such as u-boot or Linux kernel which just use a CROSS_COMPILE prefix for the GCC tools in their Makefiles. Is there any update-alternatives mechanism or something? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 7

[opensuse-arm] cross-armv7hl-gcc6 package
by Guillaume Gardet 28 Feb '17

28 Feb '17

Hi, in cross-armv7hl-gcc6 package, we get all the cross build tools, but with the gcc version appended. So, we have armv7hl-suse-linux-gnueabi-gcc-6 instead of armv7hl-suse-linux-gnueabi-gcc. This is a problem to build things such as u-boot or Linux kernel which just use a CROSS_COMPILE prefix for the GCC tools in their Makefiles. Is there any update-alternatives mechanism or something? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] RPi3 no wlan0 after mkinitrd
by Alexander Bergmann 23 Feb '17

23 Feb '17

Hi everyone, I've ran into a problem where the wifi card of my Raspberry Pi 3 can not be initialized after I've executed mkinitrd. I've used the latest JeOS Leap42.2 image. openSUSE-Leap42.2-ARM-JeOS-raspberrypi3.aarch64-2017.02.02-Build1.5.raw.xz When I start the image the WiFi card will be loaded without any problems. > brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24 > brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: … [View More]

5 6

[opensuse-arm] Two RPi3, one of them has boot problems...
by Alexander Bergmann 22 Feb '17

22 Feb '17

Hi everyone, I have two RPi3 boards here. One was purchased directly when it came out beginning of 2016, the second one around half a year later. I mainly used the second one for openSUSE testing. Just now I wanted to do the same with the first board but I'm unable to boot into the system. The boot sequence is interrupted right after grub and then the system starts again from the beginning, cycling forever. Both boards have a similar layout with V1.2 written onto it. So I have no idea where … [View More]

2 2

[opensuse-arm] Can't run yast2 on Raspberry PI3
by Roger Oberholtzer 21 Feb '17

21 Feb '17

I have no idea what has happened, but I can no longer run yast2 on my Raspberry PI3. I now get this: /sbin/yast2: line 445: 24447 Segmentation fault (core dumped) $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS It is an install of Leap 42.2 for aarch64. I think everything else is working. I can compile and do networking and all kinds of things. But not yast2. I tried running it in strace -f, but I don't see the error there. It's hard to follow as it is a shell … [View More]

1 0

[opensuse-arm] updates for armv6hl
by Michael Ströder 16 Feb '17

16 Feb '17

HI! Since more than 3 weeks there are no updates here: http://download.opensuse.org/ports/armv6hl/tumbleweed/repo/oss/suse/armv6hl/ Have the build for armv6hl been disabled? Ciao, Michael.

1 0

[opensuse-arm] weird userspace crashes with 42.2 aarch64
by Josua Mayer 16 Feb '17

16 Feb '17

Hi everybody, I am approaching you with a collection of unusual crashes that occur on my test machine: It is an early version of the 8040 Community Board by SolidRun running a patched 4.9.0 kernel with the 42.2 rootfs from http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliance… Now what I see are the following situations: 1) unhandled level XY translation fault (11) at 0xYYYYYYYY, esr 0xYYYYYYYY I have seen this with level 0, 1, 2 and 3 so far. So far I have seen it … [View More]

4 6

Main

Development

Information

Community

Social Media

Other

openSUSE ARM