February 2015

[opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2
by Jimmy PIERRE 06 Mar '15

06 Mar '15

Hi all, I have been having a fight with loads of .xz raw files. Seems that there is an issue somewhere. Would appreciate that you point me to a working img file similar to the one from Bernhard Wiedemans of 2013. My BootCamp starts in less than two hours and I am desparate to show openSUSE on Raspberry Pi 2. Best wishes, Jimmy nui.fr -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 8

[opensuse-arm] Wi-Fi connections on Raspberry Pi 1 B
by Freek de Kruijf 27 Feb '15

27 Feb '15

Hi all, I have a strange problem with Wi-Fi connections to two somewhat different Access Points. Both use the same configuration in "YaST network", apart from SSID and IP address. Still the connection does succeed with one AP, but to the other AP it always fails. Using "iwlist wlan0 scan" the only obvious difference is that one reports to use CCMP, the one which succeeds, and the other uses TKIP, which does not succeed. In the information I found on the Internet I see that the … [View More]

6 8

[opensuse-arm] openSuSE on Raspberry Pi 2 (armv7) when ? or how ?
by Tchelovek 27 Feb '15

27 Feb '15

Hello List, I am using a Raspberry Pi B+ with openSuSE already, now I have acquired a Raspberry Pi 2. Alas openSuSE doesnt seem to be prepared to provide an update to that end. Is anything in the works ? Or can one produce his own version using OBS ? I managed to run B. Wiedemann' s project altimagebuild locally ( with help from Bernhard ) and produce a running armv6 image, alas I lack the knowledge to modify it to match armv7. Any hint is appreciated. I actually run Arch Linux on … [View More]

2 1

[opensuse-arm] Please accept SR#287941 for JeOS
by Guillaume Gardet 26 Feb '15

26 Feb '15

Hi, could you please accept SR #287941 to get JeOS fixes and enhancements. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] openSUSE Factory ARM DTBs are outdated
by Guillaume Gardet 25 Feb '15

25 Feb '15

Hi, the DTBs in Factory:ARM are all outdated. Could you trigger a rebuild, please? Currently, Beaglebone black does not boot due to a too old DTB (SD card not found). Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 10

[opensuse-arm] openQA: ARM
by Matwey V. Kornilov 24 Feb '15

24 Feb '15

Hi, What do you think about adding couple of test cases for ARM to our openQA? I remember two cases when our JeOSes were broken independently of hardware. First one, when u-boot was looking for boot.scr in wrong place, second one, when the kernel 3.14 was broken due to bug in depmod. So, I think that we could test JeOS-vexpress and JeOS-vexpress64 for armv7 and aarch64 using qemu emulation (I know that it is slow ;) ) Then just check that the image is booted for the first time, and for … [View More]

10 30

[opensuse-arm] kiwi v7.02 failed
by Matwey V. Kornilov 23 Feb '15

23 Feb '15

Hi, kiwi 7.02 is failed to Factory:ARM: https://build.opensuse.org/package/live_build_log/openSUSE:Factory:ARM/kiwi… -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] Error message after installation of kernel-firmware
by Freek de Kruijf 22 Feb '15

22 Feb '15

Hi all, I got the following error message after the update of firmware-kernel in openSUSE 13.2 for Raspberry Pi. Warning: kernel-firmware-20141122git-5.1.noarch.rpm %posttrans script failed (returned 1) Bug report? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] WiFi does not come up on Raspberry Pi B
by Freek de Kruijf 21 Feb '15

21 Feb '15

I have a Raspberry PI B with openSUSE 13.2 (JeOS) which has two USB interfaces, a Bluetooth and WiFi (Realtek RTL8192cu). It worked OK during installation at home, but at its destination the WiFi connection does not come up. I can do "iwlist wlan0 scan" and I get the list of Access Points it the neighborhood. The device is configured with wicket. For access I use the Ethernet port (it works headless). I have the same system on another device, same software, same type of devices, same … [View More]network configuration and that one works as expected. I can bring the interface down with "ifdown wlan0" and up again with "ifup wlan0 -o debug" and the last lines of the output are: wicked: waiting for 1 devices to become ready (1 explicitly requested) wicked: wlan0: state=firewall-up want=network-up, wait-for=link-up wicked: waiting for 1 devices to become ready (1 explicitly requested) wicked: wlan0: state=firewall-up want=network-up, wait-for=link-up wicked: waiting for 1 devices to become ready (1 explicitly requested) wicked: device wlan0 failed: operation timed out wicked: waiting for 0 devices to become ready (0 explicitly requested) wicked: finished with all devices. wicked: wlan0: changed state none -> device-exists, still waiting for event wlan0 setup-in-progress wicked: Exit with status: 162 On the device that does work, instead of the timeout I get: wicked: ... great, we were expecting this event wicked: wlan0: changed state firewall-up -> link-up, resuming activity wicked: wlan0: state=link-up want=network-up, trying to transition to link- authenticated wicked: wlan0: changed state link-up -> link-authenticated wicked: wlan0: successfully transitioned from link-up to link-authenticated wicked: wlan0: state=link-authenticated want=network-up, trying to transition to lldp-up wicked: wlan0: calling org.opensuse.Network.LLDP.lldpUp() wicked: wlan0: changed state link-authenticated -> lldp-up wicked: wlan0: successfully transitioned from link-authenticated to lldp-up wicked: wlan0: state=lldp-up want=network-up, trying to transition to network- up wicked: wlan0: calling org.opensuse.Network.Addrconf.ipv4.static.requestLease() wicked: wlan0: changed state lldp-up -> network-up wicked: wlan0: cancel timeout wicked: wlan0: successfully transitioned from lldp-up to network-up wicked: waiting for 0 devices to become ready (0 explicitly requested) wicked: finished with all devices. wicked: wlan0: tentative addresses check wlan0 up wicked: Exit with status: 0 I found on the Internet problems with the power drawn via the USB ports. But it that case the WiFi connection got established, but was unstable. The same device with the same interfaces and the same power supply worked for almost 9 month without any problem with openSUSE 13.1. Because the SD card broke down I had to reconfigure the software. I have a similar device doing the same thing, with the same type of devices and also with openSUSE 13.2 working OK. Any suggestions? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org [View Less]

3 3

[opensuse-arm] Please accept SR #286292 for JeOS
by Guillaume Gardet 20 Feb '15

20 Feb '15

Hi, could you please accept my SR #286292 to update JeOS. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

Main

Development

Information

Community

Social Media

Other

openSUSE ARM