October 2013 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] RaspberryPi with kernel 3.11.y
by David Sterba 13 Nov '13

13 Nov '13

Hi, during this hackweek I was working on getting the 3.11 based kernel running on raspi and packaged for opensuse. So, here it goes and boots! obs://home:dsterba:ARM:RaspberryPi kernel-raspberrypi The kernel sources are based on 13.1 branch, the raspberry patch itself is a blob created from github upstream 3.11.y and the config is merged from the existing 3.6 opensuse kernel and upstream bcmrpi_defconfig. I have a local kernel git branch of the raspi changes so this could be merged to factory after it's cleaned up. Based on Bernhard's image raspberrypi-opensuse-20130907.img, booted there, installed kernel, replaced kernel.img with zImage-3.11.. david -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] 13.1 ARM images still broken. kiwi problem?
by Guillaume Gardet 07 Nov '13

07 Nov '13

Hi, As you can see here: https://build.opensuse.org/project/monitor/openSUSE:13.1:Ports armv7 images are still broken with the same error message as in Factory some time ago (which should have been fixed): "Couldn't find kernel file": ********************************************************************** [ 248s] Oct-29 08:35:07 <1> : EXEC [touch /usr/src/packages/KIWI-oem/oem/plymouth.splash.active 2>&1] [ 248s] Oct-29 08:35:07 <1> : EXEC [umount /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825//proc/sys/fs/binfmt_misc 2>&1] [ 248s] Oct-29 08:35:07 <1> : EXEC [umount /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825//proc 2>&1] [ 248s] Oct-29 08:35:07 <1> : EXEC [umount /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825//dev/pts 2>&1] [ 248s] Oct-29 08:35:07 <1> : EXEC [umount /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825//sys 2>&1] [ 248s] Oct-29 08:35:07 <1> : EXEC [find /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825 | wc -l] [ 248s] Oct-29 08:35:07 <1> : EXEC [du -s --block-size=1 /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825 | cut -f1] [ 248s] Oct-29 08:35:07 <1> : EXEC [du -s --apparent-size --block-size=1 /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825 | cut -f1] [ 249s] Oct-29 08:35:07 <1> : getSize: files: 5155 [ 249s] Oct-29 08:35:07 <1> : getSize: usage: 150364160 Bytes [ 249s] Oct-29 08:35:07 <1> : getSize: inode: 256 Bytes [ 249s] Oct-29 08:35:07 <1> : getSize: minsz: 318006784 Bytes [ 249s] Oct-29 08:35:07 <1> : Creating cpio archive... [ 249s] Oct-29 08:35:07 <1> : EXEC [pwd] [ 249s] Oct-29 08:35:07 <1> : EXEC [cd /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ/kiwi-VMXboot-4825 && find . | cpio --create --format=newc --quiet | gzip -9 -f > /usr/src/packages/KIWI-oem/oem/initrd-oemboot-suse-13.1.armv7l-2.7.1.gz] [ 308s] Oct-29 08:36:07 <1> : Creating image MD5 sum... [ 308s] Oct-29 08:36:07 <1> : EXEC [factor 55525686] [ 309s] Oct-29 08:36:07 <1> : EXEC [cat /usr/src/packages/KIWI-oem/oem/initrd-oemboot-suse-13.1.armv7l-2.7.1.gz | md5sum - | cut -f 1 -d-] [ 309s] Oct-29 08:36:08 <1> : EXEC [echo "18f6e13e65005b25e125d96872a15948 9254281 6" > /usr/src/packages/KIWI-oem/oem/initrd-oemboot-suse-13.1.armv7l-2.7.1.md5] [ 309s] Oct-29 08:36:08 <1> : EXEC [rm -rf /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ] [ 309s] Oct-29 08:36:08 <1> : Release package manager lock [ 309s] Oct-29 08:36:08 <1> : EXEC [rm -f /var/lock/kiwi-init.lock] [ 309s] Oct-29 08:36:08 <1> : Release package manager lock [ 309s] Oct-29 08:36:08 <1> : EXEC [rm -f /var/lock/kiwi-init.lock] [ 309s] Oct-29 08:36:08 <1> : EXEC [rm -f /var/cache/kiwi/zypper/zypper.conf.4825 /var/cache/kiwi/zypper/zypp.conf.4825] [ 309s] Oct-29 08:36:08 <3> : Couldn't find kernel file: /usr/src/packages/KIWI-oem/oem/initrd-oemboot-suse-13.1.armv7l-2.7.1.kernel [ 309s] Oct-29 08:36:08 <3> : KIWI exited with error(s) [ 309s] Oct-29 08:36:08 <1> : EXEC [rm -rf /usr/src/packages/KIWI-oem/oem/boot-VMX.sYwlXQ 2>&1] [ 311s] /.build/build: line 371: 1066 Killed background_monitor_process [ 313s] SysRq : Power Off [ 313s] Power down. ********************************************************************** armv7 rootfs images are fine. armv6 images are also fine locally but our worker kernel is missing FAT support: "FAT-fs (dm-0): codepage cp437 not found". Regards, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 36

[opensuse-arm] raspberrypi-gfx vs Mesa
by Guillaume Gardet 01 Nov '13

01 Nov '13

Hi, raspberrypi-gfx and mesa provide openGL ES libs and devel files. So, there are file conflicts. Should we add a "Conflicts:" line in raspberrypi-gfx spec file? Or is there a better way to avoid problems? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 17

[opensuse-arm] First Cubieboard2 image
by Oscar C 31 Oct '13

31 Oct '13

Hi, The cubieboard2 is the next version of the cubieboard1, for which we have already support (http://en.opensuse.org/HCL:CubieBoard) Both boards are the same except for the main chip. Whereas the cubieboard1 uses a A10 Allwinner (sun5i) the cubieboard2 uses a A20 Allwinner (sun7i). Kernel support for A20 is not fully upstream (some things were merged for 3.12) so the best option is to use the kernel and u-boot from linux-sunxi (http://linux-sunxi.org) I have successfully build an image for the cubieboard2, grab it from my repo (home:ocurero:arm/JeOS-cubieboard2). Bear in mind that this is the first time I use OBS and that I don't have a cubieboard to test it yet. I would be very surprised if it boots at all :) Bugs are welcome! -- Cheers -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Origen board with openSUSE 13.1
by Marcus Schäfer 31 Oct '13

31 Oct '13

Hi, I buit an image for the origen board with kernel-exynos-3.11.6-2.1.armv7hl u-boot-origen-2013.04-3.1.7.armv7hl on boot I get the following information: ------------snip---------- U-Boot 2013.04 (Oct 21 2013 - 22:37:12) for ORIGEN CPU: Exynos4210@1000MHz Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SDHCI: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 SD/MMC found on device 0 ** File not found uEnv.txt ** 530 bytes read in 93 ms (4.9 KiB/s) Running bootscript from mmc0 ... ## Executing script at 40007000 kerneladdr=0x40007000 ramdiskaddr=0x48000000 4499464 bytes read in 2342 ms (1.8 MiB/s) 62562551 bytes read in 31087 ms (1.9 MiB/s) ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.11.6-2-exynos Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4499400 Bytes = 4.3 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 48000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 62562487 Bytes = 59.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000d7f). Available machine support: ID (hex) NAME ffffffff Samsung Exynos4 (Flattened Device Tree) ffffffff SAMSUNG EXYNOS5 (Flattened Device Tree) Please check your kernel config and/or bootloader. ---------snap------- Anything I did wrong here ? Thanks Regards, Marcus -- Public Key available gpg --keyserver pgp.mit.edu --recv-keys 0xCCE3C6A2 ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg GF: Jeff Hawn,Jennifer Guild, Felix Imendörffer HRB: 21284 (AG Nürnberg) Germany http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] Factory ARM kiwi/OBS config problem?
by Guillaume Gardet 30 Oct '13

30 Oct '13

Hi, We already faced this problem before but cannot find what was the solution. Factory ARM images (both armv6 and armv7) are unresolvable because of this error: ********************************************************************** nothing provides ERROR_NO_BOOT_CONFIG_FILE_FOUND needed by kiwi-desc-oemboot-requires, nothing provides ERROR_NO_DEPENDENCIES_FOUND needed by kiwi-desc-oemboot-requires, ********************************************************************** What would be the fix? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] ARMv6 (raspberry pi) image partitioning broken?
by Guillaume Gardet 30 Oct '13

30 Oct '13

Marcus, when I build locally JeOS-raspberrypi image, I get a *.raw image but it seems that partitioning is a bit strange. We have the 2 partitions: * 1st: FAT32 for Pi bootloader (mandatory unfortunately) with bootflag enabled * 2nd: EXT4 for rootfs But when I want to boot on it, it just does not boot at all, whereas it is readable from my desktop openSUSE. The thing is fdisk reports some problems with "v" command to verify partitions: Partition 1: head 160 greater than maximum 124 Partition 1: previous sectors 411655 disagrees with total 193971 Partition 2: previous sectors 1865727 disagrees with total 897422 Remaining 5974015 unallocated 512-byte sectors If I repartition manually my SD card, number of heads/sectors are different and then I copy back the files on each partition and it does boot. I guess there is a problem with kiwi partitioning related to number of heads/sectors. Any idea how to fix that? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] Devel ARM 13.1 Contrib projects pointing to the right project?
by Guillaume Gardet 30 Oct '13

30 Oct '13

Hi, We have devel:ARM:13.1:Contrib:* projects pointing to openSUSE:13.1 (repository="ports"). Should not we make them pointing to openSUSE:13.1:Ports (repository="ports"), so that we have latest fixes? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Problem with libcrypto on armv6
by Guillaume Gardet 29 Oct '13

29 Oct '13

Hi, while trying to start xbmc, I get an illegal instruction about armv7 neon probe. gdb infos: ******************************************************************************** Program received signal SIGILL, Illegal instruction. 0xb5e4b700 in _armv7_neon_probe () from /lib/libcrypto.so.1.0.0 (gdb) where #0 0xb5e4b700 in _armv7_neon_probe () from /lib/libcrypto.so.1.0.0 #1 0xb5e47fa4 in OPENSSL_cpuid_setup () from /lib/libcrypto.so.1.0.0 #2 0xb6fe69a4 in call_init () from /lib/ld-linux-armhf.so.3 #3 0xb6fe6a80 in _dl_init_internal () from /lib/ld-linux-armhf.so.3 #4 0xb6fd7e54 in _dl_start_user () from /lib/ld-linux-armhf.so.3 #5 0xb6fd7e54 in _dl_start_user () from /lib/ld-linux-armhf.so.3 Backtrace stopped: previous frame identical to this frame (corrupt stack?) ******************************************************************************** libcrypto should have been already fixed for armv6 (ssh is working fine now). But here, I have this error. Any idea? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] cross-arm cannot produce trivial executable
by Andrey Borzenkov 29 Oct '13

29 Oct '13

+ arm-linux-gnueabi-gcc conftest.c -o ./confwi1z7i/ef /opt/cross/lib/gcc/arm-linux-gnueabi/4.5.3/../../../../arm-linux-gnueabi/bin/ld: cannot find /opt/cross/arm-linux-gnueabi/lib/libc.so.6 inside /opt/cross/arm-linux-gnueabi/bin/../../arm-linux-gnueabi /opt/cross/lib/gcc/arm-linux-gnueabi/4.5.3/../../../../arm-linux-gnueabi/bin/ld: cannot find /opt/cross/arm-linux-gnueabi/lib/libc_nonshared.a inside /opt/cross/arm-linux-gnueabi/bin/../../arm-linux-gnueabi /opt/cross/lib/gcc/arm-linux-gnueabi/4.5.3/../../../../arm-linux-gnueabi/bin/ld: cannot find /opt/cross/arm-linux-gnueabi/lib/ld-linux.so.3 inside /opt/cross/arm-linux-gnueabi/bin/../../arm-linux-gnueabi collect2: ld returned 1 exit status all files are there. I installed cross-arm-binutils-2.23.1-2.2.1.x86_64 cross-arm-linux-gnueabi-glibc-2.13-24.1.noarch cross-arm-linux-gnueabi-gcc-4.5.3-21.1.x86_64 cross-arm-linux-gnueabi-binutils-2.21.1-11.1.x86_64 What do I miss? TIA -andrey -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Can I resize root
by Chuck Payne 24 Oct '13

24 Oct '13

Hi guys, When, I been using the update very on my Pi, I notice that it's only using 2G of the 16Gigs, can I expand it to use all? I know if it was lvm, I could use resize2fs. -- Terror PUP a.k.a Chuck "PUP" Payne (678) 636-9678 ----------------------------------------- Discover it! Enjoy it! Share it! openSUSE Linux. ----------------------------------------- openSUSE -- en.opensuse.org/User:Terrorpup openSUSE Ambassador/openSUSE Member Community Manager -- Southeast Linux Foundation (SELF) skype,twiiter,identica,friendfeed -- terrorpup freenode(irc) --terrorpup/lupinstein Register Linux Userid: 155363 Have you tried SUSE Studio? Need to create a Live CD, an app you want to package and distribute , or create your own linux distro. Give SUSE Studio a try. www.susestudio.com. See you at Southeast Linux Fest, June 7-9, 2013 in Charlotte, NC. www.southeastlinuxfest.org -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] omxplayer help
by David Byte 22 Oct '13

22 Oct '13

OK, I admit it, I am a noob with RPi and openSUSE. I am trying to get omxplayer working on my opensuse:FACTORY image without much luck. I keep getting errors about nothing providing libEGL.so. I have MESA-EGL1 installed and /usr/lib/libEGL.so.1 is present. Digging around via google, I found mentions of vc (Video Core) files (including the libbcm_host file I also get errors about). I have added the Essentials and Multimedia repositories (http://lists.opensuse.org/opensuse-arm/2013-09/msg00116.html) and then tried installing omxplayer and get the nothing provides libEGL.so needed by error. Can anyone give a pointer? David Byte Sr. Technology Strategist, OEM SUSE dbyte(a)novell.com (P)918.230.2771www.suse.com https://www.suse.com/partners/integrated-systems/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] iscsi on Rpi
by David Byte 18 Oct '13

18 Oct '13

Has anyone worked with iscsi on Rpi? I can get it to see a lun, but it always reports the size as zero.. not sure why, yet. I was looking at putting my swap onto an iscsi lun to see what kind of performance I could get. (storage server using iodrive2 from fusion-io) David Byte Sr. Technology Strategist, OEM SUSE dbyte(a)novell.com (P)918.230.2771www.suse.com https://www.suse.com/partners/integrated-systems/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] JeOS* 13.1 images
by Guillaume Gardet 18 Oct '13

18 Oct '13

Hi Dirk, could you trigger a rebuild of glib2-branding-openSUSE (for gio-branding-openSUSE) in openSUSE:13.1 project so that JeOS* be no more in unresolvable state. Needed for all arm architectures (armv6, armv7 and aarch64). Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] 13.1 RC image?
by David Byte 17 Oct '13

17 Oct '13

Is there a working image for 13.1 for RPi available yet? I just picked up my first RPi and would like to try it out if there is. David Byte Sr. Technology Strategist, OEM SUSE dbyte(a)novell.com (P)918.230.2771www.suse.com https://www.suse.com/partners/integrated-systems/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] openSUSE 13.1 for ARM
by Dirk Müller 10 Oct '13

10 Oct '13

Hi, I've removed the "bootstrap-only" paths from openSUSE:13.1 for the ports repository, so now we have the "real" state of affairs visible on OBS: https://build.opensuse.org/project/show/openSUSE:13.1 and to be honest, it doesn't look that good. many low hanging packages are failing to build (including things like gnutls, qemu, webkitgtk, java-1_7_0-openjdk, hwinfo, llvm, postfix) which are essential for either the system or for the rest of the packages to be able to build. I've isolated some of the issues and added overwrites in openSUSE:13.1:Ports/extra that I can hopefully get into openSUSE Factory and 13.1 merged soon. There are more issues left, any help is appreciated. TIA, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Raspberry-Pi in OBS
by Dirk Stöcker 10 Oct '13

10 Oct '13

Hello, now the Raspbery-Pi image at least builds, but it does not work. What is the current state of this? Does someone try to fix this. Are the reasons for failure known? One thing is obvious - the name contains armv7, whereas it should be arm6. http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ras… Ciao -- http://www.dstoecker.eu/ (PGP key available) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] armv6 builders broken
by Guillaume Gardet 04 Oct '13

04 Oct '13

Hi, according to this page: https://build.opensuse.org/project/monitor/openSUSE:13.1?arch_armv6l=1&defa… there are lots of armv6 build failing because of broken builders. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Howto build package on arm@qemu
by Michal Vyskocil 04 Oct '13

04 Oct '13

Hi, please add me in CC when replying as I am not subscribed I've miserably failed to build openjdk package via qemu for arm. I've followed the documentation https://en.opensuse.org/openSUSE:ARM_distribution_howto#How_to_work_on_open… However armv6l build fails OSC_BUILD_ROOT=/var/tmp/build-root-qemu/ osc build --alternative-project=openSUSE:Factory:ARM qemu armv6l --clean [ 1s] [1/30] preinstalling filesystem... [ 1s] [2/30] preinstalling glibc... [ 1s] [3/30] preinstalling fillup... [ 1s] [4/30] preinstalling libattr1... [ 1s] [5/30] preinstalling libbz2-1... [ 1s] [6/30] preinstalling liblua5_1... [ 1s] [7/30] preinstalling liblzma5... [ 1s] [8/30] preinstalling libpcre1... [ 1s] [9/30] preinstalling libpopt0... [ 1s] [10/30] preinstalling libz1... [ 1s] [11/30] preinstalling attr... [ 1s] [12/30] preinstalling libacl1... [ 1s] [13/30] preinstalling libcap2... [ 1s] [14/30] preinstalling libselinux1... [ 1s] [15/30] preinstalling libncurses5... [ 1s] [16/30] preinstalling libreadline6... [ 1s] [17/30] preinstalling bash... [ 1s] [18/30] preinstalling qemu-linux-user... [ 2s] [19/30] preinstalling libgcc_s1... [ 2s] [20/30] preinstalling m4... [ 2s] [21/30] preinstalling sed... [ 2s] [22/30] preinstalling tar... [ 2s] [23/30] preinstalling coreutils... [ 2s] [24/30] preinstalling libelf1... [ 2s] [25/30] preinstalling diffutils... [ 2s] [26/30] preinstalling grep... [ 2s] [27/30] preinstalling permissions... [ 2s] [28/30] preinstalling aaa_base... [ 2s] [29/30] preinstalling rpm... [ 2s] [30/30] preinstalling pam... [ 2s] [ 2s] running aaa_base preinstall script [ 2s] chroot: failed to run command 'sh': No such file or directory [ 2s] running aaa_base postinstall script [ 2s] chroot: failed to run command 'sh': No such file or directory [ 2s] initializing rpm db... [ 2s] chroot: failed to run command '/usr/bin/rpmdb': No such file or directory as well as armv7l OSC_BUILD_ROOT=/var/tmp/build-root-qemu/ osc build --alternative-project=openSUSE:Factory:ARM qemu armv7l --clean ... ./configure --host=armv7hl-suse-linux-gnueabi --build=armv7hl-suse-linux-gnueabi ... [ 88s] checking for gcc... gcc [ 89s] checking whether the C compiler works... no [ 89s] configure: error: in `/home/abuild/rpmbuild/BUILD/icedtea-2.4.2': [ 89s] configure: error: C compiler cannot create executables looking at strace output, the /emul/x86_64-for-arm/usr/bin/gcc.real does search lib64 for cc1, instead of /usr/lib sudo strace -f -o out chroot /var/tmp/build-root-qemu/ /usr/bin/gcc /home/abuild/foo.c ... stat("/usr/lib64/gcc/armv7hl-suse-linux-gnueabi/4.8/cc1", 0x7ffff786c010) = -1 ENOENT (No such file or directory) BTW: not sure if related, but there is something in /usr/lib64/gcc in a buildroot file /usr/lib64/gcc/arm-suse-linux-gnueabi /usr/lib64/gcc/arm-suse-linux-gnueabi: broken symbolic link to `../../lib/gcc/arm-suse-linux-gnueabi' however does not belongs to any package rpm -qf /usr/lib64/gcc/arm-suse-linux-gnueabi file /usr/lib64/gcc/arm-suse-linux-gnueabi is not owned by any package rpm -qf /usr/lib64/gcc/ file /usr/lib64/gcc is not owned by any package Thanks for any help Michal Vyskocil

2 4

[opensuse-arm] JeOS.armv6 link
by Guillaume Gardet 04 Oct '13

04 Oct '13

Hi, JeOS.armv6 should be a link to JeOS, but it is a standalone package ATM. Could you fix it, please? (I cannot do it myself, since I have no commit rights here! ;) ) Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] openSUSE Hackweek upcoming !
by Dirk Müller 01 Oct '13

01 Oct '13

Hi, SUSE is doing another Hackweek shortly, and there is a website for it put online: https://hackweek.suse.com/ The Nuernberg SUSE employees will do a Hackweek October 7th - 11th, and we're looking for projects and interested people that want to join those projects. Community people are welcome. Anyone got ideas with ARMs ? :-) Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 4

[opensuse-arm] openSUSE:13.1:Ports misconfigured
by Guillaume Gardet 01 Oct '13

01 Oct '13

Hi, openSUSE:13.1:Ports / ports points to openSUSE:12.3/ports instead of openSUSE:13.1/ports Could you fix that, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1