September 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 02 Dec '12

02 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] Question regrading openSUSE:Factory:ARM:*
by Joop Boonen 19 Oct '12

19 Oct '12

Hi all, Today I notice that sub projects of openSUSE:Factory:ARM: exist on OBS. I would like to know what the policy is of these sub-projects. Would like to know if it would be possible to get a AC100 sub-project, for AC100 specific packages like kernel, image etc? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

[opensuse-arm] openSUSE 12.2 Beta/Warmup for Release Candidates
by Dirk Müller 13 Oct '12

13 Oct '12

Hi, over the weekend we've built 12.2 images and smoke-tested them on one board (Panda). The images are here: http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/ We plan to announce them later as Release Candiate 1. If you own a Pandaboard, BeagleBoard or an EfikaMX, please give them a try. the Vexpress ones are iirc also completely untested so far. Any feedback (positive or negative) is highly welcome. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 15

[opensuse-arm] libqt4 failed
by Guillaume GARDET 08 Oct '12

08 Oct '12

Hi, libqt4 failed to build for both armv5 and armv7 in Factory. For armv7, it seems to be due to build-armv7-with-double-qreal.diff patch which lead to a double declaration of a function. I think we should instead use "-fpu no" (or softvfp, vfpv2 or softvfp+vfpv2?) option for configure? But I am not sure it will be really used. For armv5, the compiler does not find the file "bits/c++config.h" whereas the package libstdc++47-devel is installed: ******************************************************************************** [ 531s] In file included from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qlist.h:58:0, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qlist.h:1, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/../../src/corelib/tools/qstringlist.h:47, [ 531s] from /home/abuild/rpmbuild/BUILD/qt-everywhere-opensource-src-4.8.2/include/QtCore/qstringlist.h:1, [ 531s] from project.h:45, [ 531s] from option.h:45, [ 531s] from property.cpp:43: [ 531s] /usr/armv5el-suse-linux-gnueabi/usr/include/c++/4.7/new:41:28: fatal error: bits/c++config.h: No such file or directory ******************************************************************************** Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 20

[opensuse-arm] Linaro Connect 29Oct-02Nov
by Andrew Wafaa 01 Oct '12

01 Oct '12

Aloha all, I was wondering if anyone was attending Linaro Connect[0] next month in Copenhagen? There will be numerous tracks of interest and also a cross-distro session. I will be there but was wondering if anyone else, especially from the SUSE engineering side. Regards, Andy 0 - http://connect.linaro.org/events/event/lce12-copenhagen/ -- Andrew Wafaa - Principal Engineer, Open Source - ARM Ltd. Tel: +44 1223 405981 Mob: +44 7974 074546 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] openSUSE 12.2 on a Gumstix Overo Fire notes
by Tim Serong 25 Sep '12

25 Sep '12

Hi All, I'm posting this for posterity - I had a late Hackweek last week, during which I was able to get openSUSE 12.2 running on my Gumstix Overo fire, with help from Alex on IRC. Here's the notes from my first run: http://ourobengr.com/2012/09/opensuse-12-2-gumstix-overo-fire/ And here's the notes about my subsequent "real" JeOS image: http://ourobengr.com/2012/09/a-real-opensuse-12-2-overo-image/ I'm not sure when I'm going to be able to hack on this again, but at least I have a documented starting point for next time. I also put links to the above posts on the openSUSE wiki at: http://en.opensuse.org/openSUSE:Supported_ARM_boards#Supported_platforms Special thanks to Alex for his help, and to everyone else for getting ARM support to a point where this was relatively straightforward for me to do :) Regards, Tim -- Tim Serong Senior Clustering Engineer SUSE tserong(a)suse.com -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

Re: [opensuse-arm] openSUSE 12.2 Beta/Warmup for Release Candidates
by Guillaume Gardet 25 Sep '12

25 Sep '12

Hi, Le 20/08/2012 12:04, Dirk Müller a écrit : > Hi, > > over the weekend we've built 12.2 images and smoke-tested them on one board > (Panda). The images are here: > > http://download.opensuse.org/repositories/openSUSE:/12.2:/ARM/images/ > > We plan to announce them later as Release Candiate 1. If you own a Pandaboard, > BeagleBoard or an EfikaMX, please give them a try. the Vexpress ones are iirc > also completely untested so far. Any feedback (positive or negative) is highly > welcome. I tried on a beagleboard xM the following image : openSUSE-12.2-ARM-beagle.armv7l-1.12.1-Build1.15.2.raw.xz (15th sept.) I write down my tests here : http://en.opensuse.org/openSUSE:Supported_ARM_boards#Beagleboard_xM We are missing the package /libdrm_omap1 /to get a working DVI output. Sound is not working. Cheers, Guillaume > Thanks! > Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] Stragne problem when building and ARM image in my own project
by Joop Boonen 20 Sep '12

20 Sep '12

Hi all, When I try to build one of these images. home:worldcitizen:ARM JeOS-ac100 home:worldcitizen:armv7l JeOS-ac100 I get the following error: [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: netcfg-11.5-13.1.noarch requires aaa_base, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: xorg-x11-7.6_1-5.1.noarch requires xinit, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 1: do not install module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 2: break module-init-tools-3.15-6.1.armv7hl by ignoring some of its dependencies When I remove my own project from the kiwi file I don't see this problem any more, but then I'm missing some packages. I wonder what causes this problem. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Strange problem when building and ARM image in my own project
by Joop Boonen 19 Sep '12

19 Sep '12

Hi all, When I try to build one of these images. home:worldcitizen:ARM JeOS-ac100 home:worldcitizen:armv7l JeOS-ac100 I get the following error: [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: netcfg-11.5-13.1.noarch requires aaa_base, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: xorg-x11-7.6_1-5.1.noarch requires xinit, but this requirement cannot be provided [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] Problem: nothing provides /usr/bin/tput needed by aaa_base-12.2-12.1.armv7hl [ 508s] [ 508s] Problem: nothing provides /usr/bin/eu-nm needed by module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 1: do not install module-init-tools-3.15-6.1.armv7hl [ 508s] Solution 2: break module-init-tools-3.15-6.1.armv7hl by ignoring some of its dependencies When I remove my own project from the kiwi file I don't see this problem any more, but then I'm missing some packages. I wonder what causes this problem. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] images : rootfs vs JeOS
by Guillaume Gardet 19 Sep '12

19 Sep '12

Hi, in openSUSE:/Factory:/ARM/images/ there are 2 *.tbz files : openSUSE-Factory-ARM-rootfs.armv7l-1.12.1-Build19.2.tbz (67 MB) openSUSE-Factory-ARM-JeOS.armv7l-1.12.1-Build32.4.tbz (143 MB) What is the difference? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Threading Building Block support for ARM
by Andrew Wafaa 19 Sep '12

19 Sep '12

Not sure if anyone noticed, but the folk at Linaro have posted patches for TBB [0] support on ARMv7 [1]. Would it be possible to have this included on openSUSE? 0 = http://threadingbuildingblocks.org/ 1 = https://wiki.linaro.org/OfficeofCTO/ThreadingBuildingBlocks -- Andrew Wafaa IRC: FunkyPenguin GPG: 0x3A36312F -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] openjdk7 with jamvm support submitted into Java:openjdk6:Factory
by Michal Vyskocil 18 Sep '12

18 Sep '12

Hallo all, I've just submitted the new update of java-1_7_0-openjdk, which introduces the optional jamvm support. It's not enabled by default, so standard build will use zero as usuall, but local build --with jamvm do the trick. I did a build on x86_64, but the arm build will be nice to have. Regards Michal Vyskocil

1 0

[opensuse-arm] [ANN] XDC talk: Tegra and embedded graphics
by Andreas Färber 18 Sep '12

18 Sep '12

Hi there, The X Developers' Conference in Nuremberg (SUSE All Hands Area) has a talk scheduled for Friday 14:30 "A look at the NVidia Tegra platform (and graphics drivers in the embedded space in general)": http://wiki.x.org/wiki/Events/XDC2012/Program Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Trigger rebuild please for openSUSE:Factory:ARM yast2-storage yast2-core yast2-perl-bindings nginx-1.0
by Joop Boonen 17 Sep '12

17 Sep '12

Dear all, Can openSUSE:Factory:ARM yast2-storage yast2-core yast2-perl-bindings nginx-1.0 rebuild please be triggered as these packages still require a old perl version 5.16.0 that doesn't exist any more, the current version is 5.16.1. Regards, Joop -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] rootfs target missing
by Alexander Graf 17 Sep '12

17 Sep '12

Hi Adrian, The rootfs image target is missing in the published directory. Its build succeeds just fine: https://build.opensuse.org/package/live_build_log?arch=armv7l&package=JeOS&… but for some reason the result doesn't show up in the published directory. I remember you were fiddling with something there a while back to only tar it up once. Is this related? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Added wiki for the BeagleBoard-xM
by mmeister 17 Sep '12

17 Sep '12

Feel free to make changes if necessary. Max -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Please trigger rebuild of openSUSE:Factory:ARM yast2-storage yast2-core yast2-perl-bindings nginx-1.0
by Joop Boonen 17 Sep '12

17 Sep '12

Dear all, Can openSUSE:Factory:ARM yast2-storage yast2-core yast2-perl-bindings nginx-1.0 rebuild please be triggered as these packages still require a old perl version 5.16.0 that doesn't exist any more, the current version is 5.16.1. Regards, Joop -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] rebuild of openSUSE:Factory:ARM mpi-selector
by Joop Boonen 13 Sep '12

13 Sep '12

Hi, Can package openSUSE:Factory:ARM mpi-selector please be rebuild as the currently build package depends on perl = 5.16.0 while this one doesn't exist anymore perl = 5.16.1 is the currently build version. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] ARM rootfs
by guillaume.gardet＠free.fr 11 Sep '12

11 Sep '12

Hi, I can no more find an ARM rootfs, neither for Factory, nor for 12.2. Any idea why ? We should fix this problem since it prevents people to work on unsupported boards. Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 3

[opensuse-arm] JeOS- kiwi files are now generated
by Dirk Müller 11 Sep '12

11 Sep '12

Hi, I've changed the way we build the ARM images. previously we used to have copies of a kiwi build file, config.sh and root.tar.gz for various flavors in openSUSE:Factory:ARM, e.g. JeOS, JeOS-panda and so on. This was a bit tiresome to maintain, so I wrote a small wrapper that generates the kiwi configs for the flavors based on a master image. So the current workflow should be a) modify the stuff in openSUSE:Factory:ARM/JeOS/Image.conf.in b) run pre_checkin.sh c) check the resulting generated *.kiwi files inside the JeOS package d) commit This way we can easily apply changes that are effective for all flavors. Also packagelists should be mostly idential now. Let me know if it caused any regressions. I've reviewed the panda flavor image and it should be better, but I haven't looked in detail at the other variants. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] ARM noarch packages
by Joop Boonen 11 Sep '12

11 Sep '12

Dear all, I saw that a lot of noarch doc packages like for example lilypond-doc take extremely long to be build on arm. I wonder if it would be an option to disable these packages on arm and get them build on x86_64? This way the arm distro will be build faster. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] openSUSE:Factory:ARM preinstallimage-base is constantly rebuild
by Joop Boonen 10 Sep '12

10 Sep '12

Dear all, I saw package openSUSE:Factory:ARM preinstallimage-base is constantly rebuild. Can this please be checked out as it holds up a few new build of openSUSE:Factory:ARM. Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5