March 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Packaging some ARM packages
by Guillaume Gardet 19 Mar '12

19 Mar '12

Hi, I would like to try to do some RPM for ARM using OBS, but I get an unresolvable problem, telling: "nothing provides cmake, nothing provides gcc, nothing provides gcc46, nothing provides glibc, nothing provides rpm, nothing provides tar, nothing provides patch" Any idea how to solve it? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 12

[opensuse-arm] Getting started with opensuse
by Alexjan Carraturo 19 Mar '12

19 Mar '12

Hi to all I would like to try opensuse-ARM on a particolar and almost unknow board produce by ST Microelectronics ( http://www.st.com/internet/mcu/product/251211.jsp ). In order to do this I'm tryng to search if exist some minimal rootfs ready (if it's possibile hardfp armv7), or some installation procedure to start. I search on the opensuse site, but I'm unable to find what I'm looking for (surely my fault). So, could anyone help me? Thanks in advance, regards Alexjan. -- Alexjan Carraturo -- Free Software User Group Italia administrator (http://www.fsugitalia.org) Fedora/openSUSE Ambassador member of FSFE Italian Team Twitter/Facebook/Identica: axjslack Blog: http://axjslack.wordpress.com -- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Patches for Firefox on ARM
by Guillaume Gardet 13 Mar '12

13 Mar '12

Hi, On the OBS Factory:ARM Firefox page [0], it is written: "Before submitting changes please check http://www.rosenauer.org/hg/mozilla/ as fixes are often already made there but not synced to this project." Does it mean that all fixes in this repo will be pushed to Factory and it is not necessary to submit a patch? Guillaume [0]: https://build.opensuse.org/package/show?package=MozillaFirefox&project=open… -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Package license
by Guillaume Gardet 13 Mar '12

13 Mar '12

Hi, I have a question about license in spec file. I packaged some Texas Instrument dsp binaries (which will later be used with the OMAP dsp) in my personal OBS instance but the license is the following: http://e2e.ti.com/cfs-filesystemfile.ashx/__key/CommunityServer-Discussions… What I have to write in the license field for the spec file? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] orc package
by Guillaume Gardet 08 Mar '12

08 Mar '12

Hi, I made a patch to get the orc package built for ARM. I submitted it directly to multimedia:libs (where it is developed). It has been accepted and applied but Factory and Factory:ARM did not get this last version yet. Is there a process I should start or is it automatically done (pull packages once per week or something like that) and I just need to wait? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] GSoC: openSUSE ARM
by Dirk Müller 07 Mar '12

07 Mar '12

Hi, does anyone have ideas fora good GSoC project around openSUSE ARM? http://en.opensuse.org/openSUSE:GSOC_2012_Ideas We should come up with ideas for this wiki page ASAP . Thanks, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 9

[opensuse-arm] Support for Pandaboard ES?
by endym 07 Mar '12

07 Mar '12

Hello, does the Pandabord image from openSUSE factory support the new Pandaboard ES too? Regards, endym -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

Re: [opensuse-arm] Packaging some ARM packages
by Joop Boonen 07 Mar '12

07 Mar '12

On Wed, March 7, 2012 10:09 am, Guillaume Gardet wrote: > > > Le 06/03/2012 17:44, Andrew Wafaa a Ã©crit : >> On 6 March 2012 16:41, Guillaume Gardet <guillaume.gardet(a)free.fr> wrote: >>> Hi, >>> >>> Le 06/03/2012 17:27, Adrian SchrÃ¶ter a Ã©crit : >>>> Am Dienstag, 6. MÃ¤rz 2012, 16:40:30 schrieb Guillaume Gardet: >>>>> Hi, >>>>> >>>>> I would like to try to do some RPM for ARM using OBS, but I get an unresolvable problem, telling: "nothing provides cmake, nothing provides >>>>> gcc, nothing provides gcc46, nothing provides glibc, nothing provides rpm, >>>>> nothing provides tar, nothing provides patch" >>>>> >>>>> Any idea how to solve it? >>>> Build against openSUSE:Factory:ARM/standard for armv7l... >> Hey Guillaume, >> >>> Thanks, it starts to build now. >>> >>> I am quite new to OBS and RPM build in general. I usually do embedded Linux from sources (from scratch) and/or from buildroot.org. >>> >> Well it's good to see you roll your sleeves up and get stuck in! Not sure if you have seen it yet, but this wiki page [0] is pretty useful. >> >> If you need any help, just shout >> >> Regards, >> >> Andy >> >> 0 = http://en.opensuse.org/openSUSE:ARM_distribution_howto > > Thanks for this page. How do I submit new packages which are for ARM only? Is it the same process, submitting it to the Factory and not Factory:ARM? That correct. You first need to submit to a devel project. After that to Factory. > Is there an internal review (on this list or elsewhere) before submitting a patch? When you sent a submit request it will always be reviewed. > > > Guillaume > > -- > To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org > > Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] openSUSE on Beagleboard xM
by Guillaume Gardet 06 Mar '12

06 Mar '12

Hi, I downloaded images from : http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/ for the beagleboard xM I managed to boot using this kernel and rootfs but I have no modules loaded and there is nothing in /lib/modules, so I can only use built-in drivers. The thing is I did not used initrd since I am not sure how to handle it. I think initrd has all the kernel modules. Could you tell me how to use the initrd with u-boot, please? Cheers, Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

7 48

[opensuse-arm] efika kernel
by Peter Czanik 05 Mar '12

05 Mar '12

Hello, There is a kernel config patch for the imx51 kernel from Bernhard, which are still not applied ( http://lists.opensuse.org/opensuse-kernel/2012-02/msg00036.html ). It was sent 9th February, and the latest imx51 kernel is a few weeks older: czanik@linux-6965:/tmp> rpm -qp --changelog kernel-imx51-3.2.0-2.2.armv7l.rpm | head warning: kernel-imx51-3.2.0-2.2.armv7l.rpm: Header V3 DSA/SHA1 Signature, key ID a4e5a8f4: NOKEY * Wed Jan 25 2012 dkukawka(a)suse.de - fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4. - commit 2206a5c * Wed Jan 25 2012 mmarek(a)suse.cz - proc: clean up and fix /proc/<pid>/mem handling (bnc#742279, CVE-2012-0056). - commit 4fb112d Could you apply it? Even without graphics, it's more useful, than the current one... Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5