November 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] 12.2 ARM: Ready for release?
by Dirk Müller 13 Nov '12

13 Nov '12

Hi, I've tested the current 12.2 images from http://download.opensuse.org/ports/armv7hl/distribution/12.2- untested/appliances/ on panda and it looks good enough for me. Are there any blockers for 12.2 final release known? if so please speak up. I'll remove the efikamx image as it hasn#t been fixed yet as far as I know,but otherwise the 12.2 RC2 image set would be released. Thanks, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] In case it hasn't been noticed. openSUSE:Factory:ARM fails due to nothing provides pwdutils needed by rpm-build
by Joop Boonen 12 Nov '12

12 Nov '12

Dear all, In case it hasn't been noticed. openSUSE:Factory:ARM fails due to nothing provides pwdutils needed by rpm-build Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

Re: [opensuse-arm] FYI: glibc with ARM AArch64 Support
by Andreas Jaeger 11 Nov '12

11 Nov '12

Henri Gomez <henri.gomez(a)gmail.com> schrieb: >Interesting > >How did you emulate ARM Arch 64 ? > > >2012/11/11 Andreas Jaeger <aj(a)suse.com> > >> My glibc test project home:a_jaeger:devel-glibc contains the current >git >> HEAD that includes support for ARM AArch64. >> >> Once the glibc is building fine, it will go to Factory. >> >> So, just a heads up that if anybody likes to play with 64-bit ARM, >the >> glibc should be ready... >> >> Andreas >> -- >> Andreas Jaeger aj(a){suse.com,opensuse.org} Twitter/Identica: >jaegerandi >> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany >> GF: Jeff Hawn,Jennifer Guild,Felix Imendörffer,HRB16746 (AG >Nürnberg) >> GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 >A126 >> -- >> To unsubscribe, e-mail: >opensuse-arm+unsubscribe(a)**opensuse.org<opensuse-arm%2Bunsubscribe(a)opensuse.org> >> To contact the owner, e-mail: >opensuse-arm+owner(a)opensuse.**org<opensuse-arm%2Bowner(a)opensuse.org> >> >> Not at all, this is a glibc that contains the patches as committed by linaro to upstream glibc. I didn't try cross compiling, I compile only for the normal platforms My playing was meant to be: here are the sources Andreas -- Andreas Jaeger aj(a){suse.com,novell.com,opensuse.org} Twitter / Identica: jaegerandi SUSE LINUX Products GmbH , Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) This email was sent from my phone

1 0

[opensuse-arm] FYI: glibc with ARM AArch64 Support
by Andreas Jaeger 11 Nov '12

11 Nov '12

My glibc test project home:a_jaeger:devel-glibc contains the current git HEAD that includes support for ARM AArch64. Once the glibc is building fine, it will go to Factory. So, just a heads up that if anybody likes to play with 64-bit ARM, the glibc should be ready... Andreas -- Andreas Jaeger aj(a){suse.com,opensuse.org} Twitter/Identica: jaegerandi SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn,Jennifer Guild,Felix Imendörffer,HRB16746 (AG Nürnberg) GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Cubox Image not working?
by Ciaran Farrell 09 Nov '12

09 Nov '12

I'm having a problem with the CuBox image referenced from http://www.solid-run.com/mw/index.php/OpenSUSE_on_CuBox - I downloaded it, extracted it and dd'd it on to the SD card. After inserting the SD card and connecting up a USB cable, I inserted the CuBox power cable. The result was that the CuBox s red LED started blinking. I had _no_ /dev/ttyUSB to connect to, so can't debug anything. The CuBox was working fine with a debian image on the same SD Card up to an hour ago - so I wonder if our 12.2 image is somehow different... Ciaran -- Ciaran Farrell, Attorney at Law SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, DE GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] kernel-firmware for amrv5?
by Guillaume Gardet 08 Nov '12

08 Nov '12

Hi, kernel-firmware needs kernel-default to be built but amrv5 has no kernel-default, so kernel-firmware is not buildable. Kernel-default seems to be used to add some firmwares to the package. I guess kernel-firmware should be useful for armv5, so we have 2 solutions: * 1st: add -default kernel flavour for armv5. (but which flavour will be the default?) * 2nd: add a package overlay in Factory:ARM (a local patch) to build kernel-firmware without kernel-default deps. What would be the best? If you have any idea, please share. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Re:Re:OS 12.2 auf Raspberri Pi
by Edgar Dombrowski 07 Nov '12

07 Nov '12

Hi, folks. Thank you for the suggested download of the "factory-ARMV5" file. Which I did. However a silly question: how to extract the img-file from the *.tgz? Thank you for helping an 78-oldie. Edgar from Munich -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] A line in openSUSE:Factory: systemd-mini.spec and systemd.spec I don't understand
by Joop Boonen 06 Nov '12

06 Nov '12

Hi all, I saw a line in openSUSE:Factory: systemd-mini.spec and systemd.spec I don't understand. %if 0%{?bootstrap} Requires: this-is-only-for-build-envs %else Because of this line ARM Factory JeOS images aren't build any more due to: nothing provides this-is-only-for-build-envs needed by systemd-mini Is this Requirement in the spec file for a specific reason? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Please fix kiwi package (conflict in kiwi.changes)
by Guillaume Gardet 06 Nov '12

06 Nov '12

Hi, kiwi is broken due to an update on Virtualization:Appliances which lead to a conflict in kiwi.changes. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] OS 12.2 for Raspberri Pi
by Edgar Dombrowski 06 Nov '12

06 Nov '12

Hi, folks. I am a bit lost reading all the comments for improving the configurations for the various ARM processorboards. I have installed the "initial" version of OS 12.x on my raspberri pi board for preliminary tests. 1. I would like to know which is the actual version in order to test it. 2. Further question: does this new version include also the ax25-files or can i use the 12.2. files of the standard OS version (refer to "repositories/hamradio"? Thanks for your assistance Edgar Dombrowski, DJ3PU,. Munich -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] A line in openSUSE:Factory: systemd-mini.spec and systemd.spec I don't understand
by Joop Boonen 06 Nov '12

06 Nov '12

Hi all, I saw a line in openSUSE:Factory: systemd-mini.spec and systemd.spec I don't understand. %if 0%{?bootstrap} Requires: this-is-only-for-build-envs %else Because of this line ARM Factory JeOS images aren't build any more due to: nothing provides this-is-only-for-build-envs needed by systemd-mini Is this Requirement in the spec file for a specific reason? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Regular ARM sync meeting
by Adrian Schröter 05 Nov '12

05 Nov '12

Hello, we never followed up on our regular ARM meeting. IIRC we said to have it bi-weekly. I like also suggest to use a Google+ Hangout for it. It gives us also the chance (optional) to see each other. Is that acceptable for you? In case you want to take part of this meeting, please note your email adress in this doodle: http://www.doodle.com/a74p4a38igayutwm#table Do not use any random name or I can not invite you :) I am fine to add further time options if you suggest some. thanks adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] oSC results?
by Jos Poortvliet 05 Nov '12

05 Nov '12

Hey folks, Just wonder: any results from oSC worth mentioning in a news.o.o article? /Jos

1 0

[opensuse-arm] (When will SUSE join?) Industry Leaders Collaborate to Accelerate Software Ecosystem for ARM Servers, and Join Linaro
by Joop Boonen 04 Nov '12

04 Nov '12

Hi all, http://www.linaro.org/news/release/industry-leaders-collaborate-to-accelera… When will SUSE join? Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] 12.2 rc2 - beagle
by Guillaume Gardet 01 Nov '12

01 Nov '12

Hi, I tested quickly JeOS and XFCE beagle images on a beagleboard xM. YaST firstboot is launched, so it is very nice to have a configured board. But it is launched on the serial port and not on the DVI output. Is it configurable? I guess it is launched on the debug console? It could be nice to have it on serial for JeOS and on graphical user interface on XFCE image. Moreover, XFCE (and X) is (are) not launched automatically on boot. I needed to do a "sudo startxfce4". Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5