April 2007 - openSUSE Mobile - openSUSE Mailing Lists

suscribe
by Werner Gregori 28 Apr '07

28 Apr '07

suscribe --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

WLAN mit Amilo 1310G und D-Link DWL-650+
by Hans Muecke 24 Apr '07

24 Apr '07

Hallo Freunde, Situation ... FUS Amilo 1310G mit D-Link-DWL650+ (eingebunden über ndiswrapper) soll sich drahzlos mit dem Router verbinden. Tut er auch prima unter XP, aber auf der Linux-Seite (SuSE10.2) will er einfach nicht. iwlist ind ifconfig zeigen diese Ausgaen ... ##### [root@gumdrop (/home/hans) Do Apr 19 13:04:20 Central: iwlist wlan0 scanning wlan0 Scan completed : Cell 01 - Address: 00:01:E3:0A:89:35 ESSID:"TUXnet" Protocol:IEEE 802.11FH Mode:Managed Frequency:2.472 GHz (Channel 13) Quality:0/100 Signal level:85/154 Noise level:0/154 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Extra:bcn_int=100 Extra:atim=0 Cell 02 - Address: 00:12:17:A5:5D:C3 ESSID:"Vxxxx" Protocol:IEEE 802.11FH Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:0/100 Signal level:58/154 Noise level:0/154 Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Extra:bcn_int=100 Extra:atim=0 [root@gumdrop (/home/hans) Do Apr 19 13:11:05 Central: iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11b ESSID:off/any Nickname:"gumdrop" Mode:Managed Frequency:2.472 GHz Access Point: Not-Associated Bit Rate:11 Mb/s Tx-Power:0 dBm Sensitivity=0/3 RTS thr:off Fragment thr:off Encryption key:xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx Security mode:open Power Management max timeout:0us mode:All packets received Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ##### iwlist findet sogar die ungesicherte Zelle meines Nachbarn und registriert ein Signal, unter ifconfig ist das Signal auf 0. Ich blicke jetzt nicht mehr durch. Der Schlüssel ist im Router und im Rechner der gleiche (hab`s mehrmals gecheckt), abgesehen davon komme ich auch nicht in`s Netz des Nachbarn (was ja auch nicht meine Intension ist). Was nun ... ? -- Wir mailen uns ... Hans 2007/01/07 22:20 EDDS 072220Z 24002KT 9999 FEW040 SCT250 01/M00 Q1018 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 7

Time to change tp Ubuntu? (Was USB/XFS/64bit/SuSE/Thinkpad problem)
by Frank Fiene 24 Apr '07

24 Apr '07

Hi everybody. Maybe after using SuSE since version 4... it is time to change to (K)Ubuntu. Has someone read about my performance problems with USB/XFS/64bit/SuSE-10.2? Hmm, what can i say? Kubuntu is faster loaded from CD as SuSE started from HD accessing my S-ATA-Disk. Maybe ;-) it is a DMA problem, because SuSE says: +++snip+++ ata1: SATA max UDMA/133 cmd 0xFFFFC20000032500 ctl 0x0 bmdma 0x0 irq 66 ata2: SATA max UDMA/133 cmd 0xFFFFC20000032580 ctl 0x0 bmdma 0x0 irq 66 ata3: SATA max UDMA/133 cmd 0xFFFFC20000032600 ctl 0x0 bmdma 0x0 irq 66 ata4: SATA max UDMA/133 cmd 0xFFFFC20000032680 ctl 0x0 bmdma 0x0 irq 66 +++snip+++ But Kubuntu says: +++snip+++ [ 59.529889] ata1: SATA max UDMA/133 cmd 0xffffc20000044500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 59.529969] ata2: SATA max UDMA/133 cmd 0xffffc20000044580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 59.530050] ata3: SATA max UDMA/133 cmd 0xffffc20000044600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 59.530128] ata4: SATA max UDMA/133 cmd 0xffffc20000044680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 +++snip+++ What means bmdma and ctl? Why is it 0x0 on SuSE? Why another IRQ? Can someone help? I want really keep SuSE! ;-) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

6 6

Z61p unusable during USB file transfer with openSuSE-10.2 64bit
by Frank Fiene 23 Apr '07

23 Apr '07

Hi anybody! I've configured hourly rsync backup between my home partition and an USB hard disk. Nothing special only rsync -va --delete /home/ffiene/ /media/disk/ffiene/ After rsync is started the system (Thinkpad Z61p mit Dual2 Core 2GHz, 4GB RAM, 100GB HD) is unusable slow. Has somebody the same problem and a solution? I am using the 64bit version of openSuSE-10.2 of course! Same problem with simply copying files to USB HD. The notebook feels slower then my old T42p with Centrino 2GHz/2GB/100GB. I've tried to enable irq_balancer to share interrupts on both CPUs (change of the start script to work with Dual Core), but this doesn't help. Any help would be appreciated! Regards Frank -- Frank Fiene / IT-Services Fon: +49 2526 29-6200 Fax: +49 2526 29-16-6200 mailto: ffiene(a)veka.com www.veka.com VEKA AG Dieselstr. 8 48324 Sendenhorst Deutschland/Germany Vorstand: Andreas Hartleif (Vorsitzender), Dr. Andreas W. Hillebrand Bonifatius Eichwald, Elke Hartleif, Dr. Werner Schuler Vorsitzender des Aufsichtsrates: Heinrich Laumann HRB 8282 AG Münster --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 1

SuSE10.2 / reproducable immediat resuspend after resume
by Dieter Jurzitza 16 Apr '07

16 Apr '07

Dear listmembers, I have a strange problem with my X60 recently, on both suspend2disk & suspend2ram. I always have to resume twice. 1.) suspend (2disk, 2ram) 2.) resume (is followed by an immediat resuspend (2disk, 2ram, right the same status as before) 3.) resume again -> everything is fine Anyone has any idea about this? I saw an hint on thinkpad.org in that direction regarding an initialization error of the lid-switch, but this does not fit to the behaviour I envision (always returning to the identical sleep mode as before) nor did I find the appropriate files to edit. I played around with removing some modules, but in vain, no change (and apparently is not related to unloading of modules). Thank you very much, take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <°°__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) ----------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 5

Suspend2Disk on Amilo M7425
by Kay Patzwald 15 Apr '07

15 Apr '07

Hi, I just installed openSUSE 10.2 on an Amilo M7425. Suspend2RAM works fine but Suspend2Disk / Hibernate don't works. The suspend-process stops and the last I see is: Preparing hibernate... suspend: Snapshotting system Any hints? Which logs are interesting for you? Best regards, Kay --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

5 8

PDA
by Wolfgang Rohmann 10 Apr '07

10 Apr '07

Leider habe ich im Urlaub meinen PDA (Zire 31) verloren. Den gibt es jetzt auch nicht mehr zu kaufen. Kann mir jemand hier aus dem Forum eine Empfehlung geben, welches Gerät, das aktuell auch erwerbbar ist, mit SD-Speicherkarten-Erweiterung, sich ohne Probleme mit kpilot abgleichen lässt? Grüsse W. Rohmann --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0