October 2007 - openSUSE Mobile - openSUSE Mailing Lists

After working for several times suspend to ram breaks completely
by Detlef Grittner 05 Nov '07

05 Nov '07

Hello! I have installed OpenSUSE 10.3 i386 on a Gericom EGO notebook, which is basically an MSI 1003. After installation and all upgrades I was able to suspend the machine with s2ram and the options "-f -a 1 -v", "-f -a 3 -v", and even "-f -p -m" worked. But after using this several times, the machine now hangs on resume. A complete reinstallation can solve the problem, which is really strange. The machine has an ATI Radeon 9700 Mobility and I am using the open source driver. I have installed no proprietary drivers, if not the installation program has. Are there any hints what the problem could be? Regards, Detlef --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

2 2

Acer Travelmate 4002 und Suse 10.3
by Jürgen Jentsch 03 Nov '07

03 Nov '07

Hallo, bei mir läuft das Acer Travelmate 4002 WLMI unter Suse 10.2 ziemlich zufrieden stellend. Was leider nicht geht, ist suspend to disk und suspend zu RAM. Da mir die 10.2 bis auf diese zwei Punkte (noch) reicht, mal die Frage an diejenigen mit gleicher (ähnlicher) Hardware. Geht suspend unter der 10.3? Viele Grüße Jürgen --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 2

Vodafone MCC UMTS Etna Fuji (Express) HSUPA AT-Kommandos gesucht
by Ralf Prengel 27 Oct '07

27 Oct '07

Vodafone MCC UMTS Etna Fuji (Express) HSUPA Option Hat jemand zu dieser Karte die passenden AT-Kommandos für wvdial? Gruß und Dank --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 5

Re: [opensuse-mobile-de] Nach Online Update mit intel-X11-Treiber startet X nicht mehr (OS 10.3)
by Martin Hofius 26 Oct '07

26 Oct '07

Am Mittwoch, 24. Oktober 2007 18:11 schrieb Stefan Seyfried: > On Tue, Oct 23, 2007 at 05:33:21PM +0200, Martin Hofius wrote: > > Hallo, > > > > ich habe gerade das aktuelle Online Update ausgeführt auf OS 10.3 und > > danach kurz die Session beendet, da ein neuer Intel-Grafiktreiber dabei > > sein sollte. Seitdem startet mein X11 nicht mehr, ich lande nur noch in > > der > > Textoberfläche. Auch sax 2 startet nicht mehr, das log zeigt eine > > Ich würde mal versuchen, 'Load "dri"' und 'Load "glx"' in > /etc/X11/xorg.conf auszukommentieren, vielleicht hilft das ja schon :-( Nun ja, ich habe schon versucht, die ganze Datei umzubenennen und von vorne zu starten - leider ließ sich auch so sax nicht starten. > > "sax2 -r" könnte auch helfen. Wenn das alles nicht hilft, installiere dir > das xorg-x11-driver-video-Paket von der DVD mittels "rpm -hUv --oldpackage sax2 -r hat auch nicht funktioniert. Ich hatte die Installation des ursprünglichen Pakets mittelst Yast probiert, aber der hat sich standhaft geweigert, weil irgendwelche Abhängigkeiten dann nicht mehr erfüllt wären. > ...". Und nicht vergessen: Bugreport :-) Ok, das ist jetzt wohl der zentrale Punkt. Ich habe den Treiber mittlerweile durch den alten i810-Treiber ersetzt, der funktioniert. Den wollte ich eigentlich nicht mehr einsetzen, weil er in der SuSE 9.3 erfolgreich den Einsatz von S2D verhindert hat (weil die Auflösung durch 855resolution gepatch werden mußte). Aber bei der 10.3 scheint da einiges verbessert worden zu sein - ich bin mit dem i810 Treiber im Augenblick ganz zufrieden, werde aber trotzdem mal einen Bugreport heute nachmittag einstellen, da der Intel-Treiber ja wohl seit dem Update schon eine ziemliche Macke hat. > > Viel Glück, > > Stefan Danke, Martin --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 4

Re: [opensuse-mobile] TP-T43, sound and 10.3
by Dieter Kluenter 17 Oct '07

17 Oct '07

Takashi Iwai <tiwai(a)suse.de> writes: > At Wed, 17 Oct 2007 13:26:23 +0200, > Thomas Renninger wrote: >> >> On Wed, 2007-10-10 at 16:14 +0200, Dieter Kluenter wrote: >> > "Dieter Kluenter" <dieter(a)dkluenter.de> writes: >> > >> > > Hi, >> > > i just updated my thinkpad T43 from SuSE-9.3 to >> > > openSUSE-10.3. Unfortunately sound is not working anymore: >> > >> > [...] >> > > The error from rcalsasound status >> > > /usr/sbin/alsactl: save_state:1253: No soundcards found... >> > >> > Now a strace put me in the right direction: >> > >> > ,----[ strace output ] >> > | open("/usr/share/alsa/pcm/dsnoop.conf", O_RDONLY) = 5 >> > | fstat64(5, {st_mode=S_IFREG|0644, st_size=1532, ...}) = 0 >> > | mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7 >> > | f0a000 >> > | read(5, "#\n# dsnoop\n#\n\npcm.!dsnoop {\n\t@ar"..., 4096) = 1532 >> > | read(5, "", 4096) = 0 >> > | close(5) = 0 >> > | munmap(0xb7f0a000, 4096) = 0 >> > | read(4, "", 4096) = 0 >> > | read(4, "", 4096) = 0 >> > | close(4) = 0 >> > | munmap(0xb7f0b000, 4096) = 0 >> > | open("/dev/snd/controlC0", O_RDONLY) = -1 ENOENT (No such file or directory) >> > | open("/dev/snd/controlC1", O_RDONLY) = -1 ENOENT (No such file or directory) >> > | open("/dev/snd/controlC2", O_RDONLY) = -1 ENOENT (No such file or directory) >> > |..................................... >> > | write(2, "ALSA lib confmisc.c:768:(parse_c"..., 37) = 37 >> > | write(2, "cannot find card \'0\'", 20) = 20 >> > | write(2, "\n", 1) = 1 >> > `---- >> > >> > dsnoop.conf defines 'device=$DEV' It seems that $DEV is somewhere >> > defined as /dev/snd, but the directory /dev/snd does not exist on my >> > system. All relevant files are in the /dev directory, that is, >> > /dev/control0, /dev/dsp, /dev/mixer etc. >> > How and where can I configure alsa to read from the valid directory? >> >> Takashi might know. >> This is somewhat off topic for the mobile list as this seem to be a >> general sound problem? > > Broken udev rules? They are created via 40-alsa.rules included in > alsa.rpm. > > Judging from the report, I believe either the update is incomplete, or > mixed up with some obsolete or unofficial packages. It is not a mixed update, only source is openSUSE-10.3 DVD, but I will check on your remarks of an incomplete update, Yast2 probabely has not automatically updated alsa, the installed version is dieter@magenta:~> rpm -q alsa alsa-1.0.14-31 -Dieter -- Dieter Klünter | Systemberatung http://www.dkluenter.de GPG Key ID:8EF7B6C6 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

TP-T43, sound and 10.3
by Dieter Kluenter 17 Oct '07

17 Oct '07

Hi, i just updated my thinkpad T43 from SuSE-9.3 to openSUSE-10.3. Unfortunately sound is not working anymore: ,----[ output of hwinfo ] | magenta:/home/dieter # hwinfo --sound | 22: PCI 1e.2: 0401 Multimedia audio controller | [Created at pci.301] | UDI: /org/freedesktop/Hal/devices/pci_8086_266e | Unique ID: r0Vg.E9SukUjPv66 | SysFS ID: /devices/pci0000:00/0000:00:1e.2 | SysFS BusID: 0000:00:1e.2 | Hardware Class: sound | Model: "IBM 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller" | Vendor: pci 0x8086 "Intel Corporation" | Device: pci 0x266e "82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller" | SubVendor: pci 0x1014 "IBM" | SubDevice: pci 0x0567 | Revision: 0x03 | Driver: "Intel ICH" | Driver Modules: "snd_intel8x0" | I/O Ports: 0x1c00-0x1cff (rw) | I/O Ports: 0x18c0-0x18ff (rw) | Memory Range: 0x90040800-0x900409ff (rw,non-prefetchable) | Memory Range: 0x90040400-0x900404ff (rw,non-prefetchable) | IRQ: 17 (no events) | Module Alias: "pci:v00008086d0000266Esv00001014sd00000567bc04sc01i00" | Driver Info #0: | Driver Status: snd_intel8x0 is active | Driver Activation Cmd: "modprobe snd_intel8x0" | Config Status: cfg=yes, avail=yes, need=no, active=unknown | `---- /etc/modprobe.d/sound alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-intel8x0 ,----[ output of lsmod|grep snd_*] | snd_pcm_oss 50432 0 | snd_mixer_oss 20096 1 snd_pcm_oss | snd_seq 54452 0 | snd_seq_device 12172 1 snd_seq | snd_intel8x0 36636 0 | snd_ac97_codec 97060 1 snd_intel8x0 | snd_pcm 82564 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec | snd_timer 26756 2 snd_seq,snd_pcm | snd 58164 8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer | snd_page_alloc 13960 2 snd_intel8x0,snd_pcm | soundcore 11460 1 snd | ac97_bus 6272 1 snd_ac97_codec `---- The error from rcalsasound status /usr/sbin/alsactl: save_state:1253: No soundcards found... Any help would be appreciated -Dieter -- Dieter Klünter | Systemberatung http://www.dkluenter.de GPG Key ID:8EF7B6C6 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

2 2

Lexar Cardbus 32bit-CF-Adapter unter 10.3?
by Christian Lorch 11 Oct '07

11 Oct '07

Hallo, ich hab meinen Lexar-Adapter jetzt in ein 10.3-System eingesteckt, was folgende Meldungen bringt, aber trotz händischem mounten den Inhalt der Karte nicht darstellt. Mal abgesehen davon, dass das übliche auto-mounten und unmounten übern Konqueror ja schon ganz nett wäre... ### aus /v/l/m: Oct 11 19:49:47 krypton kernel: pccard: CardBus card inserted into slot 0 Oct 11 19:49:47 krypton kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003) Oct 11 19:49:47 krypton kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Oct 11 19:49:47 krypton kernel: Probing IDE interface ide0... Oct 11 19:49:47 krypton kernel: hda: SanDisk SDCFX4-4096, CFA DISK drive Oct 11 19:49:48 krypton kernel: ide0 at 0x4010-0x4017,0x401e on irq 10 Oct 11 19:49:48 krypton kernel: hda: max request size: 128KiB Oct 11 19:49:48 krypton kernel: hda: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63 Oct 11 19:49:48 krypton kernel: hda: hda1 ### Im Partitionier-Modul von Yast taucht hda und hda1 ebenfalls mit korrekten Werten für die MB/ GB usw. auf. Kann mir jemand sagen, was ich nun weiter konfigurieren muss, dass der Adapter läuft? Vielen Dank Christian --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 1

UMTS Huawei 220
by Ralf Prengel 11 Oct '07

11 Oct '07

Zur Info http://linux.frankenberger.at/Huawei_E220.html ungetestet http://www.vodafonebetavine.net/web/linux_drivers ungetestet http://oozie.fm.interia.pl/pro/huawei-e220/ unter Suse 10.3 in Betrieb Gruß --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

2 1

problems with IBM X40 and 10.3
by Volker Krüger 02 Oct '07

02 Oct '07

Hi all, does anyone have an IBM X40? 10.2 was running great, but 10.3 gives me problems with 1) the external display: I cannot use F7 anymore to do the switching 2) suspend: It works only the first time after boot. If I suspend a second time, then the laptop hangs while trying to suspend and I cannot re-animate it. 3) I have not tested the media-slice. Furthermore, in the bootlog I can see that nvram and acpid cannot agree on the brightness level of the screen. As a consequence, I had some trouble setting the brightness level. The brightness problem has vanished, however, since recently. I don't know why (perhaps because I removed the gnome applet for the brightness control, but haven't verified). Does anyone have the same issues? Any ideas? Volker

2 1