January 2007 - openSUSE Mobile - openSUSE Mailing Lists

And again suspend2ram
by Dennis Campbell 28 Jan '07

28 Jan '07

Hi all, i upgraded from suse 10.1 to opensuse 10.2. Now suspend2ram doesn't work properly. 90% of the tries ends up in my laptop going to sleep, but when trying to wake up I get a blank screen with serious crash (I have to plug out all power then replug to get laptop to boot again). Sometimes s2ram works though. I have been trying to find out what the reason is without any success. My computer is in the powersave whitelist. My System: Asus M6N,opensuse 10.2, gnome Can anyone help me debug. Thanx. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 9

opensuse 10.2 und WALN
by Bernd Westerdorff 24 Jan '07

24 Jan '07

Hallo, ich habe mein System auf die Opensise Version 10.2 upgedated. Jetzt stellen sich aber 2 Probleme: 1: beim Systemstart soll die WLAN Verbindung mit aufgebaut werden. Diese habe ich per YAST-Netzwerkkarte so konfiguriert - klappt leider nicht 2: die Anwendung KNetworkmanager kann ich nur als root starten. Da ich dieses Tool bereits unter der Version 10.1 genutzt habe, würde ich es gerne weiternutzen. Habte Ihr ein paar Hinweise, wo ich etwas nachsehen sollte? Die WLAN Verbindung selber arbeitet, wenn ich diese als root mit dem KNetworkmanager gestartet habe. Gruß Bernd --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

3 2

Hilfe bei Navigationssystem via Laptop und GPS Maus
by stefan.milani＠imperia.net 17 Jan '07

17 Jan '07

Hallo an Alle, wie im Betreff beschrieben habe ich ein Lappy mit ner GPS Maus. Ich suche leider verzweifelt eine Navi-Software die unter Linux läuft. gpsdrive habe ich bereits ausprobiert, ist aber nicht wirklich schön ;-) Gruß Stefan --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

WLAN causes events/0 use all CPU time
by K. Elo 15 Jan '07

15 Jan '07

Hello, I have recently installed openSUSE 10.2 on my Acer Aspire 3020 with a GigaByte WLAN card (Cardbus 802.11g, model GN-WMKG). By installation I followed instructions found on: http://doube.net/3023wlmi.html What I have done so far: 1) Installed firmware for bcm43xxx (with YaST + executing 'installfw') 2) Installed rt2500 kernel modules (my WLAN card uses rt2500 chip) 3) Configured with Yast the software-controlled (!) WLAN by configuring both the WLAN-controller (AMBIT Microsystem Aspire 3020WLMi using firmware) and the WLAN card (using rt200). 4) Configured KDE to use KNetworkMangager and KWiFi Up to this point, everything seems to work. When I insert the WLAN card, the power led turns on and following lines emerge in the log: ---- cut here ---- Jan 15 20:55:00 XXXXXXXXXX kernel: pccard: CardBus card inserted into slot 0 Jan 15 20:55:00 XXXXXXXXXX kernel: ACPI: PCI Interrupt 0000:07:00.0 [A] -> GSI 20 (level, low) -> IRQ 177 Jan 15 20:55:00 XXXXXXXXXX kernel: rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com Jan 15 20:55:00 XXXXXXXXXX kernel: ACPI: PCI interrupt for device 0000:07:00.0 disabled Jan 15 20:55:00 XXXXXXXXXX kernel: ACPI: PCI Interrupt 0000:07:00.0 [A] -> GSI 20 (level, low) -> IRQ 177 Jan 15 20:55:00 XXXXXXXXXX kernel: rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com Jan 15 20:55:00 XXXXXXXXXX kernel: ACPI: PCI interrupt for device 0000:07:00.0 disabled Jan 15 20:55:00 XXXXXXXXXX NetworkManager: <debug> [1168887300.387790] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_1814_201'). Jan 15 20:55:26 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1 Jan 15 20:55:26 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1 Jan 15 20:55:27 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1 Jan 15 20:55:27 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1 Jan 15 20:55:37 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1 Jan 15 20:55:37 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1 Jan 15 20:56:03 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1 Jan 15 20:56:03 XXXXXXXXXX kernel: bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1 Jan 15 20:57:36 XXXXXXXXXX kernel: SoftMAC: Start scanning with channel: 1 Jan 15 20:57:36 XXXXXXXXXX kernel: SoftMAC: Scanning 14 channels Jan 15 20:57:36 XXXXXXXXXX kernel: SoftMAC: Scanning finished ---- cut here ---- After this, the computer starts to slow down and finally freezes. Ejecting the WLAN card brings the computer back to life. When I started 'top' before inserting the WLAN card I noticed that after having inserted the card the process 'event/0' was eating up the whole CPU time and driving the CPU load to 100%. I really do not know how to make my WLAN work and would appreciate any hints! Many thanks in advance! Kind regards, Kimmo --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

Huawei E220 HSDPA USB Modem zu laufen bekommen
by Ralf Prengel 11 Jan '07

11 Jan '07

Hallo, den Artikel habe ich gefunden http://www.linux-club.de/ftopic73752.html Hat jemand noch Infos bzw. ist hier jemand unterwegs der das Teil am Start hat? Gruß --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

firefox java plugin 64bit: javaplugin_oji fehlt
by Dr. Jürgen Vollmer 09 Jan '07

09 Jan '07

Hallo allerseits, ich versuche gerade meinem Firefox java beizubringen. Leider gibt es keine Datei javaplugin_oji.* auf meinem Rechner, die ja anscheinend das Java-Plugin darstellt. Ich habe jre-1_5_0_10-linux-amd64.rpm installiert. Hier ist ein AMD 64-Bit Rechner unter SuSE 10.2 am werkeln. Bin für jeden Tip Dankbar. Bye Jürgen -- Dr.rer.nat. Juergen Vollmer, Viktoriastrasse 15, D-76133 Karlsruhe Tel: +49(721) 92 04 87 1 Fax: +49(721) 92 04 87 2 Juergen.Vollmer(a)informatik-vollmer.de www.informatik-vollmer.de Internet-Telefonie: www.skype.com Benutzer: juergen.vollmer

3 4

Problem in 10.2 with external VGA on radeon 7500, IBM A31 laptop
by Rainer Krienke 09 Jan '07

09 Jan '07

Hello, a friend of mine is running opensuse 10.2 on his IBM A31. He has problems using the external VGA port as a second display cloning the main screen using the default Xorg video drivers (tried both "ati" and "radeon"). The video card is a Radeon 7500 card sometimes also called Radeon LW. Basically X is running fine. I configured X using sax2 and enabled clone mode in a resolution of 1024x768. The primariy display runs fine however the external monitor that should display a 1024x768 desktop is simply black. It seems to get a signal however, since you can see it flickering a very short while when X starts but then its completely black, no matter what you do on the laptops primary display which is running fine. When you connect a second monitor and then reboot you see a cloned picture on both displays even when X has started. However in this case on the external monitor the resolution is 1024x768 but the desktop is larger so on the second display you only see part of the desktop and you have to "scroll" around. Once you unplug the external monitor and then restart the X-Server you will never see anything but blackness on the external display until you reboot. Does anyone know a solution to this? Thanks very much Rainer Krienke -- --------------------------------------------------------------------------- Rainer Krienke, Universitaet Koblenz, Rechenzentrum, Raum A022 Universitaetsstrasse 1, 56070 Koblenz, Tel: +49 261287 -1312, Fax: -1001312 Mail: krienke(a)uni-koblenz.de, Web: http://www.uni-koblenz.de/~krienke Get my public PGP key: http://www.uni-koblenz.de/~krienke/mypgp.html ---------------------------------------------------------------------------

1 0

Suspend-Tasten und KPowersave
by Kai Straube 08 Jan '07

08 Jan '07

Hallo Ihr, seit ich von opensuse 10.1 zur 10.2 gewechselt bin finde ich keine Möglichkeit mehr den suspend-Zuständen Tasten zuzuordnen. Außerdem funktionieren die Menüeinträge dafür in KPowersave und im KDE-Menü nicht mehr. Mein Notebook ist ein Benq Joybook 5100U und die supend-Zustände funktionieren prächtig auf der Kommandozeile. Danke für Hilfe, Kai --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

2 1

Fwd: Linux-PHC Undervolting for OpenSuSE?
by Josh Schneider 07 Jan '07

07 Jan '07

Hello. Someone recommended I submit a request to one of the OpenSuSE mailing lists asking whether anyone would make kernel patches for using Linux-PHC (https://www.dedigentoo.org/trac/linux-phc) on OpenSuSE to undervolt CPUs. I've done this successfully under Ubuntu, but even recompiling for me is more daunting in OpenSuSE, and there are also undervolting startup scripts tailored to Ubuntu and Gentoo, but no other distros. If anyone is interested and able to look into this, it would be a great addition to OpenSuSE. TIA. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

1 0

Re: [opensuse-mobile] Suspend2Ram-Unterstützung für Acer TM 661 unter Opensuse 10.2
by Kay Patzwald 06 Jan '07

06 Jan '07

On Mon, 25 Dec 2006 13:18:42 +0100, jan sekal <jan.sekal(a)gmail.com> wrote: > hallo, > > mir funktioniert s2ram unter suse 10.2 final nicht, obwohl unter suse > 10.1final s2ram -f -a 3 funktionierte Funktioniert bei mir auf dem TM 661 unter SuSE 10.1 nicht. Er wacht nicht mehr auf. Hast du das gleiche Modell? > [..] MfG Kay --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-mobile+help(a)opensuse.org

2 1