- openSUSE Ham

[opensuse-ham]
by ng0g＠mchsi.com 11 Dec '06

11 Dec '06

Gang, I am trying to ssh from SuSE 10.0 to a VPN I have a route set up in the routing table but ssh says no route. See: steve@linux:~/Desktop> ssh ph(a)169.254.1.83 ssh: connect to host 169.254.1.83 port 22: No route to host steve@linux:~/Desktop> /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 169.254.1.0 * 255.255.255.0 U 0 0 0 eth0 I know I am doing something dumb, but I can't see it this afternoon. Steve -- 73 49 111 01001001 -- To unsubscribe, e-mail: opensuse-ham+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ham+help(a)opensuse.org

1 0

Ham Radio Packages for openSUSE 10.2
by Tim Fischer 11 Dec '06

11 Dec '06

Hello, I just started preparing the Ham Radio Packages for openSUSE 10.2. But I think they will not be published before the end of next week. I will try to update all packages to the actual versions. Especially the CVS version of the ax25-apps and ax25-tools contain a lot of improvements concerning the functionality of TCP/IP over AX.25. Please, if somebody found any errors in the packages for 10.1, mail them to me and I will try to correct them in the upcoming versions for 10.2. Because of the quantity of packages it is not possible for me to test every package. But if I receive bug reports, I will try to correct the mistakes. Vy 73 de Tim, DG7GT -- Tim Fischer -- To unsubscribe, e-mail: opensuse-ham+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ham+help(a)opensuse.org

3 3

help suse 10.1 and ax25 with baycom
by f1nni 10 Dec '06

10 Dec '06

hello all 73 i install ax25 baycom modem on my linux... i just have one problem... rx is ok 100% tx also ok , but nothing decode my packet with the same modem and tx ,my slackware linux, no problem , but nothing to do to be decode with opensuse 10.1 could someone help me....to be decode.hi 73 from f1nni rémi -- To unsubscribe, e-mail: opensuse-ham+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ham+help(a)opensuse.org

1 0

[ml-admin] Migration complete
by Henne Vogelsang 06 Dec '06

06 Dec '06

Hi, the migration is done now. Have a lot of fun. Henne -- ml-admin -- To unsubscribe, e-mail: opensuse-ham+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ham+help(a)opensuse.org

1 0

Ham radio packages source for 10.1 (or even 10.2)??
by ferrymanr 29 Nov '06

29 Nov '06

Hi I am wondering where is a definitive source of ham packages sor SuSe 10.1. I have ftp.w1nr.net which was the only source I could find so far. Richard (Dick) G4BBH

4 3

Whats going to happen to the list/s?
by Hylton Conacher(ZR1HPC) 28 Nov '06

28 Nov '06

Hi Mike, I know that some the SUSE lists have moved to the OpenSUSE domain ie SLE. I have not seen a mention of this list as 'to be moved' so I have Cc'ed the list owner to see of we can getr a response. I do know however that the list admin is BUSY so until we here from the owner or start receiving bounces from the list, because it no longer exists, lets hope it does and keep using it. 73 de ZR1HPC -- ======================================================================== Using SuSE 9.2 Professional with KDE 3.3 and Mozilla Mail 1.7.13 Linux user # 229959 at http://counter.li.org ========================================================================

1 0

RE: [suse-ham-e] Where are the email lists?
by Dewald Troskie 28 Nov '06

28 Nov '06

Maybe look at Microsoft's Site, now that Novell has signed an agreement with them :) Dewald Troskie -----Original Message----- From: Mike McCarthy, W1NR [mailto:lists@w1nr.net] Sent: 27 November 2006 02:57 PM To: suse-ham-e(a)suse.com Subject: [suse-ham-e] Where are the email lists? I can no longer find the WEB page for the suse.com mailing lists. Does anyone know where they have gone? Is this list still active? Mike, W1NR -- To unsubscribe, e-mail: suse-ham-e-unsubscribe(a)suse.com For additional commands, e-mail: suse-ham-e-help(a)suse.com

6 5

ax25 (W1NR for 10.1) help
by Lars Boman 27 Nov '06

27 Nov '06

Hello ! I got this message when i did a CALL help pls ! Lars SM6HOC ------------------------------------------------ GW4PTS AX.25 Connect v1.11 *** Connected to sm6hoc-11 *** buffer overflow detected ***: call terminated ======= Backtrace: ========= /lib/libc.so.6(__chk_fail+0x41)[0xb7ec4b31] /lib/libc.so.6[0xb7ec4308] /lib/libc.so.6(_IO_default_xsputn+0xa0)[0xb7e57120] /lib/libc.so.6(_IO_vfprintf+0x7ec)[0xb7e3054c] /lib/libc.so.6(__vsprintf_chk+0xad)[0xb7ec43bd] /lib/libc.so.6(__sprintf_chk+0x30)[0xb7ec42f0] call[0x804a106] call[0x804c8f5] call[0x804e714] /lib/libc.so.6(__libc_start_main+0xdc)[0xb7e0a87c] call[0x8049bd1] ======= Memory map: ======== 08048000-08053000 r-xp 00000000 03:06 709057 /usr/bin/call 08053000-08054000 rw-p 0000b000 03:06 709057 /usr/bin/call 08054000-08075000 rw-p 08054000 00:00 0 [heap] b7def000-b7df1000 rw-p b7def000 00:00 0 b7df1000-b7df3000 r-xp 00000000 03:06 1742891 /lib/libdl-2.4.so b7df3000-b7df5000 rw-p 00001000 03:06 1742891 /lib/libdl-2.4.so b7df5000-b7f0e000 r-xp 00000000 03:06 1742885 /lib/libc-2.4.so b7f0e000-b7f10000 r--p 00118000 03:06 1742885 /lib/libc-2.4.so b7f10000-b7f12000 rw-p 0011a000 03:06 1742885 /lib/libc-2.4.so b7f12000-b7f15000 rw-p b7f12000 00:00 0 b7f15000-b7f1c000 r-xp 00000000 03:06 709045 /usr/lib/libax25.so.0.0.0 b7f1c000-b7f1d000 rw-p 00007000 03:06 709045 /usr/lib/libax25.so.0.0.0 b7f1d000-b7f58000 r-xp 00000000 03:06 1742932 /lib/libncurses.so.5.5 b7f58000-b7f63000 rw-p 0003a000 03:06 1742932 /lib/libncurses.so.5.5 b7f63000-b7f64000 rw-p b7f63000 00:00 0 b7f82000-b7f8c000 r-xp 00000000 03:06 1742926 /lib/libgcc_s.so.1 b7f8c000-b7f8d000 rw-p 00009000 03:06 1742926 /lib/libgcc_s.so.1 b7f8d000-b7f8f000 rw-p b7f8d000 00:00 0 b7f8f000-b7fa9000 r-xp 00000000 03:06 1744513 /lib/ld-2.4.so b7fa9000-b7fab000 rw-p 00019000 03:06 1744513 /lib/ld-2.4.so bfa6c000-bfa82000 rw-p bfa6c000 00:00 0 [stack] ffffe000-fffff000 ---p 00000000 00:00 0 [vdso] Aborted lb4:~ #

2 1

Aprs for Linux
by Donn Washburn 05 Oct '06

05 Oct '06

Hey HAMs I just won a SuSE Linux Enterprise Desktop (SLED) laptop at a local SuSE Forum. I own a Kenwood D700 with a serial input that will do APRS. My question is there a APRS type of program for linux? I just check and there is no compiler so it may go to 10.1. -- 73 de Donn Washburn 307 Savoy Street Email: " n5xwb(a)hal-pc.org " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316

4 3

KPSK
by Billie Erin Walsh 02 Oct '06

02 Oct '06

Perhaps I'm asking this in the wrong forum. It IS ham related but might be better in some programming forum Has anyone installed KPSK? I downloaded the tar ball. extracted it and ran configure without a hitch. The problem started with make. [ I'm a "newbie" when it comes to Linux so I'm still kind of on the lower upswing of the learning curve. ] This is the output on the terminal screen: **************************************** Good - your configure finished. Start make now linux:/home/Billie0w/kpsk-1.0.1 # make cd . \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ /bin/sh ./config.status config.status: creating config.h config.status: config.h is unchanged config.status: executing default-1 commands make all-recursive make[1]: Entering directory `/home/Billie0w/kpsk-1.0.1' Making all in kpsk make[2]: Entering directory `/home/Billie0w/kpsk-1.0.1/kpsk' Making all in server make[3]: Entering directory `/home/Billie0w/kpsk-1.0.1/kpsk/server' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/Billie0w/kpsk-1.0.1/kpsk/server' Making all in modes make[3]: Entering directory `/home/Billie0w/kpsk-1.0.1/kpsk/modes' source='psk31-fft.C' object='psk31-fft.o' libtool=no \ depfile='.deps/psk31-fft.Po' tmpdepfile='.deps/psk31-fft.TPo' \ depmode=gcc3 /bin/sh ../../admin/depcomp \ g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -c -o psk31-fft.o `test -f psk31-fft.C || echo './'`psk31-fft.C cc1plus: warning: command line option "-Wmissing-prototypes" is valid for Ada/C/ObjC but not for C++ psk31-fft.C:113: error: extra ‘;’ make[3]: *** [psk31-fft.o] Error 1 make[3]: Leaving directory `/home/Billie0w/kpsk-1.0.1/kpsk/modes' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/Billie0w/kpsk-1.0.1/kpsk' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/Billie0w/kpsk-1.0.1' make: *** [all] Error 2 *********************************************** I don't understand the problem [ I guess is the closest I can come to saying it] but wonder if the line "psk31-fft.C:113: error: extra ‘;’" is the source of my ills. At least that is where things seem to be exiting make. -- (o:]>HUGGLES*<[:o)<br> Billie Walsh<br> KA5LSU The three best words in the English Language:<br> "I LOVE YOU"<br> Pass them on!

4 3