November 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 547620] New: Red error message when activating loopback device - only if NetworkManager controls the interfaces
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547620 Summary: Red error message when activating loopback device - only if NetworkManager controls the interfaces Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nice(a)titanic.nyme.hu QAContact: qa(a)suse.de Found By: --- Created an attachment (id=322873) --> (http://bugzilla.novell.com/attachment.cgi?id=322873) Error message screenshot User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu-HU; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.2 Firefox/3.5.3 If NetworkManager is enabled, some setup script sends a red error message during startup, complaining about that loopback interface is managed by NetworkManager or something like this. Reproducible: Always Steps to Reproduce: 1. Install openSUSE 11.2 with NetworkManager enabled 2. Start it, and press ESC very early Actual Results: A red error message will appear relating to lo device Expected Results: No error messages should appear just becuse a valid (and very basic) setting. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 547609] New: yast2 caught in endless loop executing yast2 -i alacarte
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547609 Summary: yast2 caught in endless loop executing yast2 -i alacarte Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Created an attachment (id=322864) --> (http://bugzilla.novell.com/attachment.cgi?id=322864) yast2 logs User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.2 Firefox/3.5.3 On invoking yast2 sw_single by issuing yast2 -i alacarte at the terminal prompt, yast downloads and installs alacarte as supposed to, but instead of quitting starts over and over again ad infinitum. # rpm -qa | grep yast2 yast2-transfer-2.18.0-2.12.i586 yast2-irda-2.18.1-1.1.noarch yast2-add-on-2.18.3-1.4.noarch yast2-devtools-2.18.11-1.1.noarch yast2-ycp-ui-bindings-devel-2.18.5-1.14.i586 yast2-ldap-client-2.18.5-1.5.noarch yast2-qt-pkg-2.18.15-1.3.i586 yast2-xml-2.16.1-55.9.i586 yast2-pam-2.17.1-1.52.noarch yast2-nis-server-2.18.0-2.4.noarch yast2-trans-stats-2.15.0-121.12.noarch yast2-control-center-gnome-2.13.4-1.2.i586 yast2-control-center-qt-2.18.11-1.2.i586 yast2-update-2.18.6-1.3.i586 yast2-x11-2.18.0-1.2.noarch yast2-restore-2.18.1-2.4.noarch yast2-profile-manager-2.18.2-1.3.i586 yast2-http-server-2.18.8-1.13.noarch yast2-trans-de-2.18.1-15.1.noarch yast2-mouse-2.18.2-1.1.i586 yast2-sound-2.18.3-1.1.i586 yast2-qt-devel-2.18.7-1.5.i586 yast2-online-update-frontend-2.18.5-1.1.noarch yast2-repair-2.18.3-1.17.noarch yast2-gtk-pkg-2.18.3-1.7.i586 yast2-fingerprint-reader-2.18.1-1.2.i586 yast2-inetd-2.17.3-2.7.noarch yast2-printer-devel-doc-2.18.19-1.2.i586 yast2-nis-server-devel-doc-2.18.0-2.4.noarch yast2-hardware-detection-2.17.1-1.200.i586 yast2-slp-2.16.0-82.10.i586 yast2-runlevel-2.17.4-1.62.noarch yast2-packager-2.18.12-1.1.i586 yast2-samba-server-2.18.2-1.1.noarch yast2-nfs-server-2.18.1-1.1.noarch yast2-trans-ru-2.18.1-15.1.noarch yast2-core-2.18.19-1.10.i586 yast2-storage-2.18.19-1.1.i586 yast2-gtk-2.19.15-1.3.i586 autoyast2-installation-2.18.11-1.2.noarch yast2-core-devel-2.18.19-1.10.i586 yast2-libyui-2.18.8-1.5.i586 yast2-ncurses-2.18.10-1.10.i586 yast2-perl-bindings-2.18.0-1.19.i586 yast2-nfs-common-2.18.1-1.1.noarch yast2-firewall-2.18.0-1.6.noarch yast2-samba-client-2.18.3-1.3.noarch yast2-ftp-server-2.18.0-1.29.noarch yast2-pkg-bindings-2.18.10-1.3.i586 yast2-online-update-2.18.5-1.1.noarch yast2-installation-devel-doc-2.18.31-1.1.noarch yast2-ca-management-2.18.1-1.1.noarch yast2-trans-fr-2.18.1-15.1.noarch yast2-ycp-ui-bindings-2.18.5-1.14.i586 yast2-dbus-client-2.18.0-1.3.i586 yast2-2.18.25-1.1.i586 yast2-nis-client-2.18.2-1.6.i586 yast2-tune-2.18.1-1.5.i586 yast2-ntp-client-2.18.0-2.4.noarch yast2-iscsi-client-2.18.6-1.17.noarch yast2-pkg-bindings-devel-doc-2.18.10-1.1.noarch yast2-network-devel-doc-2.18.49-1.1.i586 yast2-trans-it-2.18.1-15.1.noarch yast2-ncurses-pkg-2.18.4-1.16.i586 yast2-tftp-server-2.18.0-1.1.noarch yast2-ruby-bindings-0.3.3-1.6.i586 yast2-libyui-devel-2.18.8-1.5.i586 yast2-branding-openSUSE-2.18.0-1.4.noarch yast2-printer-2.18.19-1.2.i586 yast2-ldap-2.17.3-8.11.i586 yast2-sysconfig-2.17.0-55.4.noarch yast2-metapackage-handler-0.8.9-1.10.noarch yast2-sudo-2.18.2-1.6.noarch yast2-trans-en_US-2.18.1-15.1.noarch yast2-registration-branding-openSUSE-2.18.0-1.1.noarch yast2-testsuite-2.16.2-64.4.noarch yast2-ncurses-devel-2.18.10-1.10.i586 yast2-vm-2.16.10-2.4.i586 yast2-backup-2.18.4-2.4.noarch yast2-python-bindings-2.17.4-1.35.i586 yast2-trans-es-2.18.1-15.1.noarch yast2-registration-2.18.0-1.1.noarch yast2-network-2.18.49-1.1.i586 yast2-kerberos-client-2.18.3-1.1.noarch yast2-mail-2.18.2-1.1.noarch yast2-security-2.18.3-1.1.noarch yast2-country-data-2.18.20-1.1.i586 yast2-tv-2.18.4-1.1.noarch yast2-qt-graph-2.18.4-3.7.i586 yast2-control-center-2.18.11-1.2.i586 yast2-installation-2.18.31-1.1.noarch yast2-scanner-2.18.0-1.19.i586 yast2-apparmor-2.18.3-1.4.noarch yast2-devel-doc-2.18.25-1.1.i586 yast2-bootloader-2.18.17-1.1.i586 yast2-nfs-client-2.18.0-1.5.noarch yast2-users-2.18.13-1.1.i586 yast2-ldap-server-2.18.3-1.1.i586 yast2-trans-pl-2.18.1-15.1.noarch yast2-theme-openSUSE-2.18.9-2.1.noarch yast2-storage-devel-2.18.19-1.1.i586 yast2-qt-2.18.7-1.5.i586 yast2-country-2.18.20-1.1.i586 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 547578] New: Pure-FTPD fails to recognize PassivePortRange Option in /etc/pure-ftpd/pure-ftpd.conf
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547578 User martin(a)rhm.de added comment http://bugzilla.novell.com/show_bug.cgi?id=547578#c465954 Summary: Pure-FTPD fails to recognize PassivePortRange Option in /etc/pure-ftpd/pure-ftpd.conf Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: martin(a)rhm.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-1.3 Firefox/3.5.3 Follow-up bug for #465954. The fix proposed there is not working anymore, or to be more specific: one has to revert the 11.1 fix for 11.2 in order to get pure-ftpd to honor the PassivePortRange setting. Reproducible: Always Steps to Reproduce: 1. Add PassivePortRange 30000:35000 to /etc/pure-ftpd/pure-ftpd.conf 2. /usr/sbin/pure-config-args /etc/pure-ftpd/pure-ftpd.conf Actual Results: Output does not include -p 30000:35000 Expected Results: Output should include -p 30000:35000 Editing /etc/sbin/pure-config-args to move PassivePortRange => "-p" back from numpairc_switch_for to numpairb_switch_for. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 547565] New: Keyboard shortcuts configurable, yet no functionality
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547565 Summary: Keyboard shortcuts configurable, yet no functionality Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.2 Firefox/3.5.3 On a Fujitsu Siemens Amilo Si1520 running oS11.2RC1 keyboard shortcuts effect nothing. Checking "Computer/Control Center/Keyboard Shortcuts" show they are configured. Reconfiguring also works (pressing a key sets the relevant code), but pressing the keys during a session does nothing. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 26

[Bug 547549] New: german spell check dictionaries need update and rework
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547549 Summary: german spell check dictionaries need update and rework Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bj(a)sernet.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-DK; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-118.3 Firefox/3.5.3 there are currently German ispell, aspell and myspell/hunspell dictionary RPMs. All have different source packages and the ispell and aspell dictionaries are very outdated. As they are all derieved from the igerman98 source package I suggest the they should be built from source RPM, too. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 59

[Bug 547318] New: aria2c 1.6.2 is out fixing security issues in 1.5.x and 1.6.x
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547318 Summary: aria2c 1.6.2 is out fixing security issues in 1.5.x and 1.6.x Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.14) Gecko/2009090900 SUSE/3.0.14-0.1.2 Firefox/3.0.14 The most recent version of aria2c available for 11.2 (as yet) appears to 1.5.2 1.6.2 is out which improves the security of aria2c and fixes a bunch of bugs. Please upgrade aria2c to 1.6.2 for factory. Also, a security issue in earlier versions of aria2c could cause a DOS or the execution of malicious code - please make sure that 11.1 is also updated to an appropriate version. Thanks! This is especially important since zypper relies on aria2c for its downloads, thus a vulnerability or security issues effects nearly every user! Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 547075] New: New GTK package manager == bad
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=547075 Summary: New GTK package manager == bad Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dominique.leuenberger(a)tmf-group.com QAContact: jsrain(a)novell.com Found By: --- Hi, sorry for the bad summary, but that's how the new yast2 gtk package manager behaves on me. There are several things just 'broken' (well, it does work, but read for yourself): - The workflow is distrupted with the tabs Add / Remove / Update / Undo. I think it's the only application where 'actions' are grouped in tabs. This is completely counter-intuitive. And it distrupts workflows when going through a list of installed apps, selecting updates, you can't just select a package for removal anymore: you first need to switch to the -> remove tab. After the entire selection, clicking next changes the button text to 'Sure?'. This is also not very expected and at first glance appears that no action is going to happen. It's a nice playful way, but anything else than what a user would expect. I'll comment on more things after using it more often. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 58

[Bug 546893] New: HPLIP seems to bloat the default minimal selection
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=546893 User jsmeix(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546893#c546856 Summary: HPLIP seems to bloat the default minimal selection Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Patterns AssignedTo: coolo(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: qa(a)suse.de CC: lnussel(a)novell.com Found By: Development While working on bug #546856 I was told that hplip seems to be in the default minimal selection of 11.2 and that draws in lots of unexpected stuff for a minimal system like including X, Qt, Mesa etc. I didn't do a minimal 11.2 installation to verify it. Nevertheless I like to report it to be on the safe side. >From my point of view HPLIP is a big and fat full featured printer and scanner driver solution and should not be by default in any minimal selection. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 546632] New: VNC remote administration does not work.
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=546632 Summary: VNC remote administration does not work. Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 8 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: nice(a)titanic.nyme.hu QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; hu-HU; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-2.1 Firefox/3.5.3 I enabled remote graphical login in the local security section of KDE, and additionally enable remote administration in the network services section, but when I connect by vncclient to loclhost's 5901th port, I get a black screen with a default X shaped X.org cursor. Moreover, the nework services section is unable to open the firewall ports, because network interfaces aren't assigned to any firewall zone initially. I either have to open VPN ports manually in the firewall section of YaST, or I have to assign the ports before trying to open VPN ports from the network services section of YaST. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 60

[Bug 546575] New: udev chnaged network interface name
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=546575 Summary: udev chnaged network interface name Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: lmuelle(a)novell.com QAContact: qa(a)suse.de Found By: --- By updating openSUSE 11.1 to 11.2 MS 8 udev gave eth0 and eth1 the new devoce names eth2 and eth3. I'll attach /etc/udev/rules.d/70-persistent-net.rules how it looked after the update. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 62