November 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 552443] New: libcrc32c kernel module has missing dependency on crc32c module
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=552443 Summary: libcrc32c kernel module has missing dependency on crc32c module Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 I tried to install btrfs as root filesystem but it did not boot the machine since the btrfs module could not get loaded. The problem is that the dependend module libcrc32c could not be loaded since it needs crc32c but does not have a dependency on it - and therefore the module is not added to the initrd and cannot get used. Please add a dependency in the module libcrc32c on crc32c. Reproducible: Always Steps to Reproduce: Install 11.2 system with / as btrfs and then boot (needs separate /boot partition as well) - it fails. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 552346] New: Bluetooth hardeware not initialized after resume
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=552346 Summary: Bluetooth hardeware not initialized after resume Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: mobile-bugs(a)forge.provo.novell.com ReportedBy: jw(a)novell.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.2 Firefox/3.5.3 After suspend/resume from RAM, the WLAN LED comes on, but not the bluetooth LED. I can either press Fn-F5 to switch bluetooth on, or use the radio kill-switch to switch both WLAN and bluetooth off and on again. With 11.1, bluetooth was initialized automatically after resume. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 552330] New: Adding a MySQL DSN using ODBCConfig results in "Could not construct a property list for (MySQL ODBC 3.51.27r695 Driver)"
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=552330 Summary: Adding a MySQL DSN using ODBCConfig results in "Could not construct a property list for (MySQL ODBC 3.51.27r695 Driver)" Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: asimonelli(a)acacorp.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 I installed the MyODBC-unixODBC package version: 3.51.27r695-3.1. I use the ODBCConfig GUI program to add a User DSN. I click Add, select the MySQL ODBC driver in the list (registered by the install program) and click OK. I then get a message "Could not construct a property list for (MySQL ODBC 3.51.27r695 Driver)" and cannot proceed any further. Reproducible: Always Steps to Reproduce: 1. Run ODBCConfig 2. Add User DSN 3. Select MySQL ODBC Driver and click OK Actual Results: A message pops up: "Could not construct a property list for (MySQL ODBC 3.51.27r695 Driver)" And I cannot proceed. Expected Results: Opens the MySQL ODBC Connector dialog window. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 552218] New: KDE4 print dialog forgets settings
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=552218 Summary: KDE4 print dialog forgets settings Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: schmuker(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) SUSE The KDE4 print dialog does not remember any changes made to its settings. In addition, settings made via yast in the CUPS config are ignored. This is annoying especially for settings like duplex: The user needs to remember for _every_ print action to recheck the duplex printing option in one of the settings tab. This bug has already caused significant paper waste in our lab. It is a big annoyance to anyone who needs to print a lot with KDE. In addition and it's a regression from KDE3.5, where printer settings can be set and saved from the printer dialog. This bug has been reported to the KDE bugzilla, and although it is the bug with the most votes in kde-print there is no reaction whatsoever from a kde-print dev: https://bugs.kde.org/show_bug.cgi?id=180051 There is also a corresponding bugreport in QT's bugzilla, also unassigned and with no schedule: http://bugreports.qt.nokia.com/browse/QTBUG-3567 I hope there will be some merciful mind here at OpenSUSE who will not instantly mark this bug as a duplicate of something else but instead give some hope to the numerous users who are constantly annoyed by this bug. Reproducible: Always Steps to Reproduce: 1. Print a document, set duplex to on in the kprinter dialog 2. Print another document on the same printer, find that duplex is off Alternatively: 1. Use yast to configure a printer to use duplex 2. Print a document from KDE4 and find that it is not printed in duplex Actual Results: Settings in the kde printing dialog are not remembered. Settings made in the CUPS printer config are ignored by the KDE printing dialog. Expected Results: Settings should be remembered, or at least the settings made in CUPS should be respected. Found on OpenSUSE 11.1 with KDE4.3.1 from factory (release "183", current as of nov 3, 2009) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 551967] New: mkinitrd: kernel command line parameter with spaces do not work
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551967 Summary: mkinitrd: kernel command line parameter with spaces do not work Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: i586 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ml(a)newton.leun.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 As far as I know syntax for specifing luks devices on kernel command line is: luks="foo bar" luks_foo=/dev/vg/foo luks_bar=/dev/vg/bar But this does not work, EOF while searching for matching '"`. Looking at script /lib/mkinitrd/scripts/boot-start.sh this is no surprise, code like # kernel commandline parsing for o in $(cat /proc/cmdline); do will certainly not work with spaces involved. Note: The config file mimic (/boot/config/... in initrd) does not help very much, because I need the devices to be initialized in defined order. This happened to work in openSuse11.0 when specifying on kernel command line but does not when the config file mechanism in 11.1/11.2 comes into play. Reproducible: Always Steps to Reproduce: 1. Add 'luks="foo bar"' to kernel command line (e.g. grub/menu.lst) 2. reboot Actual Results: eval line 72: unexpected EOF while looking for matching '"` eval line 72: syntax error: unexpected end of file -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 551801] New: OpenSuse RC2 fail to boot up!
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551801 User coolo(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=551801#c551364 Summary: OpenSuse RC2 fail to boot up! Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: All OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: coolo(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de CC: mweiss38(a)gmx.net Depends on: 551364 Found By: --- +++ This bug was initially created as a clone of Bug #551364 +++ User-Agent: Opera/9.80 (Windows NT 5.1; U; pt) Presto/2.2.15 Version/10.01 Hi! OpenSuse Final release candidate doesn't boot up on my pc. Notebook Lg S1 P222P. After "start Hal Daemon" I get a black screen and nothing more! LG S1 P222P - C2D 7200, ATI MOBILITY X1600 Please can someone help-me! It's a shame I need to go back to kubuntu! :( Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 551748] New: invalid option message in iptables time module
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551748 Summary: invalid option message in iptables time module Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: i586 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: support(a)microtechniques.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 3.5.30729) One a system upgraded from SuSE 11.1 to 11.2 a number of my iptables scripts stated generating 'invalid argument' error messages. The scripts were not touched and work correctly previously. The FAQ on the iptables website has the following entry: You have just upgraded your kernel and suddenly some of the commands (especially in the 'nat' table), and you experience something like: # iptables -A POSTROUTING -t nat -o ppp0 -j MASQUERADE iptables: Invalid argument This happens when the structure size between kernel and userspace changes. You will need to recompile the iptables userspace program using the include files of your new kernel. This only happens if you (or the vendor of your kernel) has applied some patches either only to the old or only to the new kernel. It is not supposed to happen between vanilla kernel.org kernels. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 551690] New: /etc/sysconfig/dhcp specifies dhcpd but dhclient is used
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551690 Summary: /etc/sysconfig/dhcp specifies dhcpd but dhclient is used Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.14) Gecko/2009090900 SUSE/3.0.14-0.1.2 Firefox/3.0.14 /etc/sysconfig/dhcp specifies dhcpcd for DHCLIENT_BIN, however dhclient is used. network manager is in force, here, so whatever that means (it's about the most opaque system in the known universe). If this setting is ignored when NM is in force, a note in the file would be nice indicating which options (all? none?) are ignored. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 551640] New: cat: /sys/class/net/eth1/device/prod_id4: No such device on ifdown / ifup eth1
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551640 Summary: cat: /sys/class/net/eth1/device/prod_id4: No such device on ifdown / ifup eth1 Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 On issuing ifdown eth1 / ifup eth1 the following output is seen: # ifdown eth1 cat: /sys/class/net/eth1/device/prod_id4: No such device eth1 device: Lucent Technologies WaveLAN/IEEE Version 01.01 # ifup eth1 cat: /sys/class/net/eth1/device/prod_id4: No such device eth1 device: Lucent Technologies WaveLAN/IEEE Version 01.01 eth1 warning: WPA configured but may be unsupported eth1 warning: by this device eth1 starting wpa_supplicant Starting DHCP4 client on eth1. . . . . . . . eth1 DHCP4 continues in background Not sure what the significance is, it doesn't seem to cause any malfunction, but somehow doesn't look right. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 550951] New: [maintenance] Cherrypick fixes from f-spot 0.6.1.4
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=550951 Summary: [maintenance] Cherrypick fixes from f-spot 0.6.1.4 Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: vuntz(a)novell.com QAContact: qa(a)suse.de Found By: --- Stéphane mentions it's a nice bug fix release, so we probably want at least some of this as a maintenance update. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 32