December 2018 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-SU-2018:4005-1: moderate: Security update for glib2
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for glib2 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:4005-1 Rating: moderate References: #1107116 #1107121 #1111499 Cross-References: CVE-2018-16428 CVE-2018-16429 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves two vulnerabilities and has one errata is now available. Description: This update for glib2 fixes the following issues: Security issues fixed: - CVE-2018-16428: Do not do a NULL pointer dereference (crash). Avoid that, at the cost of introducing a new translatable error message (bsc#1107121). - CVE-2018-16429: Fixed out-of-bounds read vulnerability ing_markup_parse_context_parse() (bsc#1107116). Non-security issue fixed: - various GVariant parsing issues have been resolved (bsc#1111499) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1485=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): glib2-debugsource-2.54.3-lp150.3.3.1 glib2-devel-2.54.3-lp150.3.3.1 glib2-devel-debuginfo-2.54.3-lp150.3.3.1 glib2-devel-static-2.54.3-lp150.3.3.1 glib2-tools-2.54.3-lp150.3.3.1 glib2-tools-debuginfo-2.54.3-lp150.3.3.1 libgio-2_0-0-2.54.3-lp150.3.3.1 libgio-2_0-0-debuginfo-2.54.3-lp150.3.3.1 libgio-fam-2.54.3-lp150.3.3.1 libgio-fam-debuginfo-2.54.3-lp150.3.3.1 libglib-2_0-0-2.54.3-lp150.3.3.1 libglib-2_0-0-debuginfo-2.54.3-lp150.3.3.1 libgmodule-2_0-0-2.54.3-lp150.3.3.1 libgmodule-2_0-0-debuginfo-2.54.3-lp150.3.3.1 libgobject-2_0-0-2.54.3-lp150.3.3.1 libgobject-2_0-0-debuginfo-2.54.3-lp150.3.3.1 libgthread-2_0-0-2.54.3-lp150.3.3.1 libgthread-2_0-0-debuginfo-2.54.3-lp150.3.3.1 - openSUSE Leap 15.0 (x86_64): glib2-devel-32bit-2.54.3-lp150.3.3.1 glib2-devel-32bit-debuginfo-2.54.3-lp150.3.3.1 glib2-tools-32bit-2.54.3-lp150.3.3.1 glib2-tools-32bit-debuginfo-2.54.3-lp150.3.3.1 libgio-2_0-0-32bit-2.54.3-lp150.3.3.1 libgio-2_0-0-32bit-debuginfo-2.54.3-lp150.3.3.1 libgio-fam-32bit-2.54.3-lp150.3.3.1 libgio-fam-32bit-debuginfo-2.54.3-lp150.3.3.1 libglib-2_0-0-32bit-2.54.3-lp150.3.3.1 libglib-2_0-0-32bit-debuginfo-2.54.3-lp150.3.3.1 libgmodule-2_0-0-32bit-2.54.3-lp150.3.3.1 libgmodule-2_0-0-32bit-debuginfo-2.54.3-lp150.3.3.1 libgobject-2_0-0-32bit-2.54.3-lp150.3.3.1 libgobject-2_0-0-32bit-debuginfo-2.54.3-lp150.3.3.1 libgthread-2_0-0-32bit-2.54.3-lp150.3.3.1 libgthread-2_0-0-32bit-debuginfo-2.54.3-lp150.3.3.1 - openSUSE Leap 15.0 (noarch): gio-branding-upstream-2.54.3-lp150.3.3.1 glib2-lang-2.54.3-lp150.3.3.1 References: https://www.suse.com/security/cve/CVE-2018-16428.html https://www.suse.com/security/cve/CVE-2018-16429.html https://bugzilla.suse.com/1107116 https://bugzilla.suse.com/1107121 https://bugzilla.suse.com/1111499

1 0

openSUSE-SU-2018:4004-1: important: Security update for qemu
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for qemu ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:4004-1 Rating: important References: #1106222 #1107489 #1110910 #1111006 #1111010 #1111013 #1112499 #1114422 #1114529 Cross-References: CVE-2018-10839 CVE-2018-15746 CVE-2018-16847 CVE-2018-17958 CVE-2018-17962 CVE-2018-17963 CVE-2018-18849 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that solves 7 vulnerabilities and has two fixes is now available. Description: This update for qemu fixes the following issues: Security issues fixed: - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the 'msg_len' field has an invalid value. A user/process could use this flaw to crash the Qemu process resulting in DoS (bsc#1114422). Non-security issues fixed: - Fix slowness in arm32 emulation (bsc#1112499). - In order to improve spectre mitigation for s390x, add a new feature in the QEMU cpu model to provide the etoken cpu feature for guests (bsc#1107489). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1483=1 Package List: - openSUSE Leap 15.0 (noarch): qemu-ipxe-1.0.0+-lp150.7.12.1 qemu-seabios-1.11.0-lp150.7.12.1 qemu-sgabios-8-lp150.7.12.1 qemu-vgabios-1.11.0-lp150.7.12.1 - openSUSE Leap 15.0 (x86_64): qemu-2.11.2-lp150.7.12.1 qemu-arm-2.11.2-lp150.7.12.1 qemu-arm-debuginfo-2.11.2-lp150.7.12.1 qemu-block-curl-2.11.2-lp150.7.12.1 qemu-block-curl-debuginfo-2.11.2-lp150.7.12.1 qemu-block-dmg-2.11.2-lp150.7.12.1 qemu-block-dmg-debuginfo-2.11.2-lp150.7.12.1 qemu-block-gluster-2.11.2-lp150.7.12.1 qemu-block-gluster-debuginfo-2.11.2-lp150.7.12.1 qemu-block-iscsi-2.11.2-lp150.7.12.1 qemu-block-iscsi-debuginfo-2.11.2-lp150.7.12.1 qemu-block-rbd-2.11.2-lp150.7.12.1 qemu-block-rbd-debuginfo-2.11.2-lp150.7.12.1 qemu-block-ssh-2.11.2-lp150.7.12.1 qemu-block-ssh-debuginfo-2.11.2-lp150.7.12.1 qemu-debuginfo-2.11.2-lp150.7.12.1 qemu-debugsource-2.11.2-lp150.7.12.1 qemu-extra-2.11.2-lp150.7.12.1 qemu-extra-debuginfo-2.11.2-lp150.7.12.1 qemu-guest-agent-2.11.2-lp150.7.12.1 qemu-guest-agent-debuginfo-2.11.2-lp150.7.12.1 qemu-ksm-2.11.2-lp150.7.12.1 qemu-kvm-2.11.2-lp150.7.12.1 qemu-lang-2.11.2-lp150.7.12.1 qemu-linux-user-2.11.2-lp150.7.12.1 qemu-linux-user-debuginfo-2.11.2-lp150.7.12.1 qemu-linux-user-debugsource-2.11.2-lp150.7.12.1 qemu-ppc-2.11.2-lp150.7.12.1 qemu-ppc-debuginfo-2.11.2-lp150.7.12.1 qemu-s390-2.11.2-lp150.7.12.1 qemu-s390-debuginfo-2.11.2-lp150.7.12.1 qemu-testsuite-2.11.2-lp150.7.12.1 qemu-tools-2.11.2-lp150.7.12.1 qemu-tools-debuginfo-2.11.2-lp150.7.12.1 qemu-x86-2.11.2-lp150.7.12.1 qemu-x86-debuginfo-2.11.2-lp150.7.12.1 References: https://www.suse.com/security/cve/CVE-2018-10839.html https://www.suse.com/security/cve/CVE-2018-15746.html https://www.suse.com/security/cve/CVE-2018-16847.html https://www.suse.com/security/cve/CVE-2018-17958.html https://www.suse.com/security/cve/CVE-2018-17962.html https://www.suse.com/security/cve/CVE-2018-17963.html https://www.suse.com/security/cve/CVE-2018-18849.html https://bugzilla.suse.com/1106222 https://bugzilla.suse.com/1107489 https://bugzilla.suse.com/1110910 https://bugzilla.suse.com/1111006 https://bugzilla.suse.com/1111010 https://bugzilla.suse.com/1111013 https://bugzilla.suse.com/1112499 https://bugzilla.suse.com/1114422 https://bugzilla.suse.com/1114529

1 0

openSUSE-SU-2018:4003-1: moderate: Security update for dpdk
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for dpdk ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:4003-1 Rating: moderate References: #1069601 #1073363 #1089638 #1102310 Cross-References: CVE-2018-1059 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves one vulnerability and has three fixes is now available. Description: This update for dpdk to version 16.11.8 provides the following security fix: - CVE-2018-1059: restrict untrusted guest to misuse virtio to corrupt host application (ovs-dpdk) memory which could have lead all VM to lose connectivity (bsc#1089638) and following non-security fixes: - Enable the broadcom chipset family Broadcom NetXtreme II BCM57810 (bsc#1073363) - Fix a latency problem by using cond_resched rather than schedule_timeout_interruptible (bsc#1069601) - Fix a syntax error affecting csh environment configuration (bsc#1102310) - Fixes in net/bnxt: * Fix HW Tx checksum offload check * Fix incorrect IO address handling in Tx * Fix Rx ring count limitation * Check access denied for HWRM commands * Fix RETA size * Fix close operation - Fixes in eal/linux: * Fix an invalid syntax in interrupts * Fix return codes on thread naming failure - Fixes in kni: * Fix crash with null name * Fix build with gcc 8.1 - Fixes in net/thunderx: * Fix build with gcc optimization on * Avoid sq door bell write on zero packet - net/bonding: Fix MAC address reset - vhost: Fix missing increment of log cache count This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1484=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): dpdk-16.11.8-6.8.1 dpdk-debuginfo-16.11.8-6.8.1 dpdk-debugsource-16.11.8-6.8.1 dpdk-devel-16.11.8-6.8.1 dpdk-devel-debuginfo-16.11.8-6.8.1 dpdk-examples-16.11.8-6.8.1 dpdk-examples-debuginfo-16.11.8-6.8.1 dpdk-tools-16.11.8-6.8.1 - openSUSE Leap 42.3 (x86_64): dpdk-kmp-default-16.11.8_k4.4.162_78-6.8.1 dpdk-kmp-default-debuginfo-16.11.8_k4.4.162_78-6.8.1 - openSUSE Leap 42.3 (noarch): dpdk-doc-16.11.8-6.8.1 References: https://www.suse.com/security/cve/CVE-2018-1059.html https://bugzilla.suse.com/1069601 https://bugzilla.suse.com/1073363 https://bugzilla.suse.com/1089638 https://bugzilla.suse.com/1102310

1 0

openSUSE-SU-2018:4002-1: moderate: Security update for nextcloud
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for nextcloud ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:4002-1 Rating: moderate References: #1114817 Cross-References: CVE-2018-3780 Affected Products: openSUSE Leap 42.3 openSUSE Leap 15.0 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for nextcloud fixes security issues and bugs. Security issues fixed: - CVE-2018-3780: Stored XSS in autocomplete suggestions for file comments (boo#1114817) This update also contains all bug fixes and improvements in the 13.0.8 version, including: - Password expiration time changed from 12h to 7d - Bug fixes to the OAuth brute force protection - Various other bug fixes and improvements Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1487=1 - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1487=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2018-1487=1 Package List: - openSUSE Leap 42.3 (noarch): nextcloud-13.0.8-15.1 - openSUSE Leap 15.0 (noarch): nextcloud-13.0.8-lp150.2.9.1 - openSUSE Backports SLE-15 (noarch): nextcloud-13.0.8-bp150.2.6.1 References: https://www.suse.com/security/cve/CVE-2018-3780.html https://bugzilla.suse.com/1114817

1 0

openSUSE-SU-2018:3999-1: moderate: Security update for nextcloud
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for nextcloud ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3999-1 Rating: moderate References: #1114817 Cross-References: CVE-2018-3780 Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for nextcloud fixes security issues and bugs. Security issues fixed: - CVE-2018-3780: Stored XSS in autocomplete suggestions for file comments (boo#1114817) This update also contains all bug fixes and improvements in the 13.0.8 version, including: - Password expiration time changed from 12h to 7d - Bug fixes to the OAuth brute force protection - Various other bug fixes and improvements Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2018-1487=1 Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (noarch): nextcloud-13.0.8-8.1 References: https://www.suse.com/security/cve/CVE-2018-3780.html https://bugzilla.suse.com/1114817

1 0

openSUSE-SU-2018:3998-1: moderate: Security update for dom4j
by opensuse-security＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Security Update: Security update for dom4j ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:3998-1 Rating: moderate References: #1105443 Cross-References: CVE-2018-1000632 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for dom4j fixes the following issues: - CVE-2018-1000632: Prevent XML injection that could have resulted in an attacker tampering with XML documents (bsc#1105443). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1486=1 Package List: - openSUSE Leap 15.0 (noarch): dom4j-1.6.1-lp150.3.3.1 dom4j-demo-1.6.1-lp150.3.3.1 dom4j-javadoc-1.6.1-lp150.3.3.1 dom4j-manual-1.6.1-lp150.3.3.1 References: https://www.suse.com/security/cve/CVE-2018-1000632.html https://bugzilla.suse.com/1105443

1 0

openSUSE-OU-2018:3997-1: Optional update to add pcre2 to the SUSE PackageHub
by maintenance＠opensuse.org 07 Dec '18

07 Dec '18

openSUSE Optional Update: Optional update to add pcre2 to the SUSE PackageHub ______________________________________________________________________________ Announcement ID: openSUSE-OU-2018:3997-1 Rating: low References: Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that has 0 optional fixes can now be installed. Description: This update adds pcre2 to the SUSE PackageHub. pcre2 is a regular expression library. Patch Instructions: To install this openSUSE Optional Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2018-1481=1 Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 ppc64le s390x x86_64): libpcre2-16-0-10.32-2.1 libpcre2-32-0-10.32-2.1 libpcre2-8-0-10.32-2.1 libpcre2-posix2-10.32-2.1 pcre2-devel-10.32-2.1 pcre2-devel-static-10.32-2.1 pcre2-tools-10.32-2.1 - SUSE Package Hub for SUSE Linux Enterprise 12 (noarch): pcre2-doc-10.32-2.1 References:

1 0