December 2018 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-RU-2018:4280-1: moderate: Recommended update for gtg
by maintenance＠opensuse.org 28 Dec '18

28 Dec '18

openSUSE Recommended Update: Recommended update for gtg ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4280-1 Rating: moderate References: #1042118 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for gtg fixes the following issues: - gtg may have crashed when python-notify is not installed (boo#1042118) Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1613=1 Package List: - openSUSE Leap 42.3 (noarch): gtg-0.3.1-11.5.1 gtg-lang-0.3.1-11.5.1 References: https://bugzilla.suse.com/1042118

1 0

openSUSE-RU-2018:4276-1: moderate: Recommended update for erlang
by maintenance＠opensuse.org 27 Dec '18

27 Dec '18

openSUSE Recommended Update: Recommended update for erlang ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4276-1 Rating: moderate References: #1118867 #1118869 Affected Products: SUSE Package Hub for SUSE Linux Enterprise 12 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for erlang fixes the following issues: Erlang was updated to 18.3.4.11 (boo#1118867) or to 20.3.8.15 (boo#1118869) Changes for 18.3.4.11: * stdlib: List subtraction (The -- operator) will now yield properly on large inputs. * erts: List subtraction (The -- operator) will now yield properly on large inputs. * erts: Fixed small memory leak that could occur when sending to a terminating port. * ssh: Fix rare spurios shutdowns of ssh servers when receiveing {'EXIT',_,normal} messages. * ssh: Default exec is disabled when a user-defined shell is enabled Changes for 20.3.8.15: * asn1: Handle erroneous length during decode (BER only) without crashing. * ssh: Incompatibility with newer OpenSSH fixed. Previously versions 7.8 and later could cause Erlang SSH to exit. * ssl: Add engine support for RSA key exchange * erts: List subtraction (The -- operator) will now yield properly on large inputs. * stdlib: List subtraction (The -- operator) will now yield properly on large inputs. * ssl: Extend check for undelivered data at closing, could under some circumstances fail to deliverd all data that was acctualy recivied. * erts: ERTS internal trees of monitor structures could get into an inconsistent state. This could cause 'DOWN' messages not to be delivered when they should, as well as delivery of 'DOWN' messages that should not be delivered. * erts: Fixed bug in ets:select_replace when called with a fully bound key could cause a following call to ets:next or ets:prev to crash the emulator or return invalid result. * eldap: A race condition at close could cause the eldap client to exit with a badarg message as cause. - http://erlang.org/download/OTP-20.3.8.9.README * Fix a regression in OTP-15204 that removed .beam file metadata - http://erlang.org/download/OTP-20.3.8.8.README * inets: Do not use chunked-encoding with 1xx, 204 and 304 responses when using mod_esi * inets: Add robust handling of chunked-encoded HTTP responses with an empty body (1xx, 204, 304) - Changes for 20.3.8.7: - http://erlang.org/download/OTP-20.3.8.7.README * crypto: Update the crypto engine functions to handle multiple loads of an engine * mnesia: Fixed a bug where the bag table index data was not deleted when objects were deleted. * inets: Change status code for no mod found to handle request to 501 * erts: Fixed a bug causing some Erlang references to be inconsistently ordered. This could for example cause failure to look up certain elements with references as keys in search data structures. This bug was introduced in R13B02. Thanks to Simon Cornish for finding the bug and supplying a fix. * compiler: Fixed an issue where files compiled with the +deterministic option differed if they were compiled in a different directory but were otherwise identical. * crypto: Fixed a node crash in crypto:compute_key(ecdh, ...) when passing a wrongly typed Others argument. * erts: Fixed a bug which caused an emulator crash when enif_send() was called by a NIF that executed on a dirty scheduler. The bug was either triggered when the NIF called enif_send() without a message environment, or when the process executing the NIF was send traced. * erts: Fixed a bug causing some Erlang references to be inconsistently ordered. This could for example cause failure to look up certain elements with references as keys in search data structures. This bug was introduced in R13B02. Thanks to Simon Cornish for finding the bug and supplying a fix. * mnesia: When master node is set do not force a load from ram_copies replica when there are no available disc_copies, since that would load an empty table. Wait until a disk replica is available or until user explicitly force_loads the table. * mnesia: Allow to add replicas even if all other replicas are down when the other replicase are not stored on disk. * ssl: Correct handling of empty server SNI extension * ssl: Correct cipher suite handling for ECDHE_*, the incorrect handling could cause an incorrrect suite to be selected and most likly fail the handshake. * asn1: A bug in ASN.1 BER decoding has been fixed. When decoding a recursively enclosed term the length was not propagated to that term decoding, so if the length of the enclosed term was longer than the enclosing that error was not dectected. A hard coded C stack limitation for decoding recursive ASN.1 terms has been introduced. This is currently set to 8 kWords giving a nesting depth of about 1000 levels. Deeper terms can not be decoded, which should not be much of a real world limitation. * erts: Fixed a race condition in the inet driver that could cause receive to hang when the emulator was compiled with gcc8. * erts: Fix bug in generation of erl_crash.dump, which could cause VM to crash. Bug exist since erts-9.2 (OTP-20.2). * ic: Fixed potential buffer overflow bugs in oe_ei_encode_long/ulong/longlong/ulonglong functions on 64-bit architectures. These functions expect 32 bit integers as the IDL type "long" is defined as 32 bits. But there is nothing preventing user code from "breaking" the interface and pass larger values on 64-bit architectures where the C type "long" is 64 bits. * inets: Enhance error handling, that is mod_get will return 403 if a path is a directory and not a file. * kernel: Non semantic change in dist_util.erl to silence dialyzer warning. * ssl: Improve cipher suite handling correcting ECC and TLS-1.2 requierments. Backport of solution for ERL-641 * ssl: Option keyfile defaults to certfile and should be trumped with key. This failed for engine keys. * erl_interface: Make ei_connect and friends also accept state ok_simultaneous during handshake, which means the other node has initiated a connection setup that will be cancelled in favor of this connection. * erts: Fixed a rare bug that could cause processes to be scheduled after they had been freed. * ic: Fixed bug in ic causing potential buffer overrun in funtion oe_ei_encode_atom. Bug exists since ic-4.4.4 (OTP-20.3.4). * kernel: Fix some potential buggy behavior in how ticks are sent on inter node distribution connections. Tick is now sent to c-node even if there are unsent buffered data, as c-nodes need ticks in order to send reply ticks. The amount of sent data was also calculated wrongly when ticks were suppressed due to unsent buffered data. * inets: Options added for setting low-level properties on the underlying TCP connections. The options are: sock_ctrl, sock_data_act and sock_data_pass. See the manual for details. * ssh: SFTP clients reported the error reason "" if a non-OTP sftp server was killed during a long file transmission. Now the signal name (for example "KILL") will be the error reason if the server's reason is empty. The documentation also lacked type information about this class of errors. * ssh: Fix ssh_sftp decode error for sftp protocol version 4 * syntax_tools: Fix a bug regarding reverting map types. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - SUSE Package Hub for SUSE Linux Enterprise 12: zypper in -t patch openSUSE-2018-1611=1 Package List: - SUSE Package Hub for SUSE Linux Enterprise 12 (aarch64 x86_64): erlang-18.3.4.11-12.1 erlang-debugger-18.3.4.11-12.1 erlang-debugger-src-18.3.4.11-12.1 erlang-dialyzer-18.3.4.11-12.1 erlang-dialyzer-src-18.3.4.11-12.1 erlang-diameter-18.3.4.11-12.1 erlang-diameter-src-18.3.4.11-12.1 erlang-doc-18.3.4.11-12.1 erlang-epmd-18.3.4.11-12.1 erlang-et-18.3.4.11-12.1 erlang-et-src-18.3.4.11-12.1 erlang-gs-18.3.4.11-12.1 erlang-gs-src-18.3.4.11-12.1 erlang-jinterface-18.3.4.11-12.1 erlang-jinterface-src-18.3.4.11-12.1 erlang-observer-18.3.4.11-12.1 erlang-observer-src-18.3.4.11-12.1 erlang-reltool-18.3.4.11-12.1 erlang-reltool-src-18.3.4.11-12.1 erlang-src-18.3.4.11-12.1 erlang-wx-18.3.4.11-12.1 erlang-wx-src-18.3.4.11-12.1 References: https://bugzilla.suse.com/1118867 https://bugzilla.suse.com/1118869

1 0

openSUSE-RU-2018:4275-1: moderate: Recommended update for erlang
by maintenance＠opensuse.org 27 Dec '18

27 Dec '18

openSUSE Recommended Update: Recommended update for erlang ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4275-1 Rating: moderate References: #1118867 #1118869 Affected Products: openSUSE Leap 42.3 openSUSE Leap 15.0 openSUSE Backports SLE-15 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for erlang fixes the following issues: Erlang was updated to 18.3.4.11 (boo#1118867) or to 20.3.8.15 (boo#1118869) Changes for 18.3.4.11: * stdlib: List subtraction (The -- operator) will now yield properly on large inputs. * erts: List subtraction (The -- operator) will now yield properly on large inputs. * erts: Fixed small memory leak that could occur when sending to a terminating port. * ssh: Fix rare spurios shutdowns of ssh servers when receiveing {'EXIT',_,normal} messages. * ssh: Default exec is disabled when a user-defined shell is enabled Changes for 20.3.8.15: * asn1: Handle erroneous length during decode (BER only) without crashing. * ssh: Incompatibility with newer OpenSSH fixed. Previously versions 7.8 and later could cause Erlang SSH to exit. * ssl: Add engine support for RSA key exchange * erts: List subtraction (The -- operator) will now yield properly on large inputs. * stdlib: List subtraction (The -- operator) will now yield properly on large inputs. * ssl: Extend check for undelivered data at closing, could under some circumstances fail to deliverd all data that was acctualy recivied. * erts: ERTS internal trees of monitor structures could get into an inconsistent state. This could cause 'DOWN' messages not to be delivered when they should, as well as delivery of 'DOWN' messages that should not be delivered. * erts: Fixed bug in ets:select_replace when called with a fully bound key could cause a following call to ets:next or ets:prev to crash the emulator or return invalid result. * eldap: A race condition at close could cause the eldap client to exit with a badarg message as cause. - http://erlang.org/download/OTP-20.3.8.9.README * Fix a regression in OTP-15204 that removed .beam file metadata - http://erlang.org/download/OTP-20.3.8.8.README * inets: Do not use chunked-encoding with 1xx, 204 and 304 responses when using mod_esi * inets: Add robust handling of chunked-encoded HTTP responses with an empty body (1xx, 204, 304) - Changes for 20.3.8.7: - http://erlang.org/download/OTP-20.3.8.7.README * crypto: Update the crypto engine functions to handle multiple loads of an engine * mnesia: Fixed a bug where the bag table index data was not deleted when objects were deleted. * inets: Change status code for no mod found to handle request to 501 * erts: Fixed a bug causing some Erlang references to be inconsistently ordered. This could for example cause failure to look up certain elements with references as keys in search data structures. This bug was introduced in R13B02. Thanks to Simon Cornish for finding the bug and supplying a fix. * compiler: Fixed an issue where files compiled with the +deterministic option differed if they were compiled in a different directory but were otherwise identical. * crypto: Fixed a node crash in crypto:compute_key(ecdh, ...) when passing a wrongly typed Others argument. * erts: Fixed a bug which caused an emulator crash when enif_send() was called by a NIF that executed on a dirty scheduler. The bug was either triggered when the NIF called enif_send() without a message environment, or when the process executing the NIF was send traced. * erts: Fixed a bug causing some Erlang references to be inconsistently ordered. This could for example cause failure to look up certain elements with references as keys in search data structures. This bug was introduced in R13B02. Thanks to Simon Cornish for finding the bug and supplying a fix. * mnesia: When master node is set do not force a load from ram_copies replica when there are no available disc_copies, since that would load an empty table. Wait until a disk replica is available or until user explicitly force_loads the table. * mnesia: Allow to add replicas even if all other replicas are down when the other replicase are not stored on disk. * ssl: Correct handling of empty server SNI extension * ssl: Correct cipher suite handling for ECDHE_*, the incorrect handling could cause an incorrrect suite to be selected and most likly fail the handshake. * asn1: A bug in ASN.1 BER decoding has been fixed. When decoding a recursively enclosed term the length was not propagated to that term decoding, so if the length of the enclosed term was longer than the enclosing that error was not dectected. A hard coded C stack limitation for decoding recursive ASN.1 terms has been introduced. This is currently set to 8 kWords giving a nesting depth of about 1000 levels. Deeper terms can not be decoded, which should not be much of a real world limitation. * erts: Fixed a race condition in the inet driver that could cause receive to hang when the emulator was compiled with gcc8. * erts: Fix bug in generation of erl_crash.dump, which could cause VM to crash. Bug exist since erts-9.2 (OTP-20.2). * ic: Fixed potential buffer overflow bugs in oe_ei_encode_long/ulong/longlong/ulonglong functions on 64-bit architectures. These functions expect 32 bit integers as the IDL type "long" is defined as 32 bits. But there is nothing preventing user code from "breaking" the interface and pass larger values on 64-bit architectures where the C type "long" is 64 bits. * inets: Enhance error handling, that is mod_get will return 403 if a path is a directory and not a file. * kernel: Non semantic change in dist_util.erl to silence dialyzer warning. * ssl: Improve cipher suite handling correcting ECC and TLS-1.2 requierments. Backport of solution for ERL-641 * ssl: Option keyfile defaults to certfile and should be trumped with key. This failed for engine keys. * erl_interface: Make ei_connect and friends also accept state ok_simultaneous during handshake, which means the other node has initiated a connection setup that will be cancelled in favor of this connection. * erts: Fixed a rare bug that could cause processes to be scheduled after they had been freed. * ic: Fixed bug in ic causing potential buffer overrun in funtion oe_ei_encode_atom. Bug exists since ic-4.4.4 (OTP-20.3.4). * kernel: Fix some potential buggy behavior in how ticks are sent on inter node distribution connections. Tick is now sent to c-node even if there are unsent buffered data, as c-nodes need ticks in order to send reply ticks. The amount of sent data was also calculated wrongly when ticks were suppressed due to unsent buffered data. * inets: Options added for setting low-level properties on the underlying TCP connections. The options are: sock_ctrl, sock_data_act and sock_data_pass. See the manual for details. * ssh: SFTP clients reported the error reason "" if a non-OTP sftp server was killed during a long file transmission. Now the signal name (for example "KILL") will be the error reason if the server's reason is empty. The documentation also lacked type information about this class of errors. * ssh: Fix ssh_sftp decode error for sftp protocol version 4 * syntax_tools: Fix a bug regarding reverting map types. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1611=1 - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1611=1 - openSUSE Backports SLE-15: zypper in -t patch openSUSE-2018-1611=1 Package List: - openSUSE Leap 42.3 (x86_64): erlang-18.3.4.11-9.3 erlang-debugger-18.3.4.11-9.3 erlang-debugger-src-18.3.4.11-9.3 erlang-debuginfo-18.3.4.11-9.3 erlang-debugsource-18.3.4.11-9.3 erlang-dialyzer-18.3.4.11-9.3 erlang-dialyzer-debuginfo-18.3.4.11-9.3 erlang-dialyzer-src-18.3.4.11-9.3 erlang-diameter-18.3.4.11-9.3 erlang-diameter-src-18.3.4.11-9.3 erlang-doc-18.3.4.11-9.3 erlang-epmd-18.3.4.11-9.3 erlang-epmd-debuginfo-18.3.4.11-9.3 erlang-et-18.3.4.11-9.3 erlang-et-src-18.3.4.11-9.3 erlang-gs-18.3.4.11-9.3 erlang-gs-src-18.3.4.11-9.3 erlang-jinterface-18.3.4.11-9.3 erlang-jinterface-src-18.3.4.11-9.3 erlang-observer-18.3.4.11-9.3 erlang-observer-src-18.3.4.11-9.3 erlang-reltool-18.3.4.11-9.3 erlang-reltool-src-18.3.4.11-9.3 erlang-src-18.3.4.11-9.3 erlang-wx-18.3.4.11-9.3 erlang-wx-debuginfo-18.3.4.11-9.3 erlang-wx-src-18.3.4.11-9.3 - openSUSE Leap 15.0 (x86_64): erlang-20.3.8.15-lp150.2.3.4 erlang-debugger-20.3.8.15-lp150.2.3.4 erlang-debugger-src-20.3.8.15-lp150.2.3.4 erlang-debuginfo-20.3.8.15-lp150.2.3.4 erlang-debugsource-20.3.8.15-lp150.2.3.4 erlang-dialyzer-20.3.8.15-lp150.2.3.4 erlang-dialyzer-debuginfo-20.3.8.15-lp150.2.3.4 erlang-dialyzer-src-20.3.8.15-lp150.2.3.4 erlang-diameter-20.3.8.15-lp150.2.3.4 erlang-diameter-src-20.3.8.15-lp150.2.3.4 erlang-doc-20.3.8.15-lp150.2.3.4 erlang-epmd-20.3.8.15-lp150.2.3.4 erlang-epmd-debuginfo-20.3.8.15-lp150.2.3.4 erlang-et-20.3.8.15-lp150.2.3.4 erlang-et-src-20.3.8.15-lp150.2.3.4 erlang-jinterface-20.3.8.15-lp150.2.3.4 erlang-jinterface-src-20.3.8.15-lp150.2.3.4 erlang-observer-20.3.8.15-lp150.2.3.4 erlang-observer-src-20.3.8.15-lp150.2.3.4 erlang-reltool-20.3.8.15-lp150.2.3.4 erlang-reltool-src-20.3.8.15-lp150.2.3.4 erlang-src-20.3.8.15-lp150.2.3.4 erlang-wx-20.3.8.15-lp150.2.3.4 erlang-wx-debuginfo-20.3.8.15-lp150.2.3.4 erlang-wx-src-20.3.8.15-lp150.2.3.4 - openSUSE Backports SLE-15 (x86_64): erlang-20.3.8.15-bp150.3.3.1 erlang-debugger-20.3.8.15-bp150.3.3.1 erlang-debugger-src-20.3.8.15-bp150.3.3.1 erlang-dialyzer-20.3.8.15-bp150.3.3.1 erlang-dialyzer-src-20.3.8.15-bp150.3.3.1 erlang-diameter-20.3.8.15-bp150.3.3.1 erlang-diameter-src-20.3.8.15-bp150.3.3.1 erlang-doc-20.3.8.15-bp150.3.3.1 erlang-epmd-20.3.8.15-bp150.3.3.1 erlang-et-20.3.8.15-bp150.3.3.1 erlang-et-src-20.3.8.15-bp150.3.3.1 erlang-jinterface-20.3.8.15-bp150.3.3.1 erlang-jinterface-src-20.3.8.15-bp150.3.3.1 erlang-observer-20.3.8.15-bp150.3.3.1 erlang-observer-src-20.3.8.15-bp150.3.3.1 erlang-reltool-20.3.8.15-bp150.3.3.1 erlang-reltool-src-20.3.8.15-bp150.3.3.1 erlang-src-20.3.8.15-bp150.3.3.1 erlang-wx-20.3.8.15-bp150.3.3.1 erlang-wx-src-20.3.8.15-bp150.3.3.1 References: https://bugzilla.suse.com/1118867 https://bugzilla.suse.com/1118869

1 0

openSUSE-RU-2018:4273-1: moderate: Recommended update for libgcrypt
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for libgcrypt ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4273-1 Rating: moderate References: #1117355 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for libgcrypt provides the following fix: - Fail selftests when checksum file is missing in FIPS mode only. (bsc#1117355) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1607=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libgcrypt-cavs-1.6.1-48.1 libgcrypt-cavs-debuginfo-1.6.1-48.1 libgcrypt-debugsource-1.6.1-48.1 libgcrypt-devel-1.6.1-48.1 libgcrypt-devel-debuginfo-1.6.1-48.1 libgcrypt20-1.6.1-48.1 libgcrypt20-debuginfo-1.6.1-48.1 libgcrypt20-hmac-1.6.1-48.1 - openSUSE Leap 42.3 (x86_64): libgcrypt-devel-32bit-1.6.1-48.1 libgcrypt-devel-debuginfo-32bit-1.6.1-48.1 libgcrypt20-32bit-1.6.1-48.1 libgcrypt20-debuginfo-32bit-1.6.1-48.1 libgcrypt20-hmac-32bit-1.6.1-48.1 References: https://bugzilla.suse.com/1117355

1 0

openSUSE-SU-2018:4272-1: important: Security update for yast2-rmt
by opensuse-security＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Security Update: Security update for yast2-rmt ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:4272-1 Rating: important References: #1117602 Cross-References: CVE-2018-17957 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for yast2-rmt to version 1.1.12 fixes the following issues: Security issue fixed: - CVE-2018-17957: Secure MySQL credentials by not exposing them on the command line (bsc#1117602) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1604=1 Package List: - openSUSE Leap 15.0 (noarch): yast2-rmt-1.1.2-lp150.2.12.1 References: https://www.suse.com/security/cve/CVE-2018-17957.html https://bugzilla.suse.com/1117602

1 0

openSUSE-RU-2018:4271-1: moderate: Recommended update for cobbler
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for cobbler ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4271-1 Rating: moderate References: #1113747 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for cobbler fixes the following issues: - cobbler logs were not being rotated as intended (bsc#1113747) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1605=1 Package List: - openSUSE Leap 42.3 (noarch): cobbler-2.6.6-20.1 cobbler-tests-2.6.6-20.1 cobbler-web-2.6.6-20.1 koan-2.6.6-20.1 References: https://bugzilla.suse.com/1113747

1 0

openSUSE-RU-2018:4270-1: moderate: Recommended update for open-iscsi
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for open-iscsi ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4270-1 Rating: moderate References: #1100351 #1102589 #1105916 #1111608 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has four recommended fixes can now be installed. Description: This update for open-iscsi provides the following fixes: - Limit dhpcv6 retries. (bsc#1105916) - Restore space to output of "iscsiadm -m node". (bsc#1111608) - iscsiuio: Do not flush tx queue on each uio interrupt. This makes ping to such NICs work better. (bsc#1102589) - Update to latest upstream, including fixes for iscsiuio. (bsc#1100351) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1608=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): iscsiuio-0.7.8.2-60.1 iscsiuio-debuginfo-0.7.8.2-60.1 libopeniscsiusr0_2_0-2.0.876-60.1 libopeniscsiusr0_2_0-debuginfo-2.0.876-60.1 open-iscsi-2.0.876-60.1 open-iscsi-debuginfo-2.0.876-60.1 open-iscsi-debugsource-2.0.876-60.1 open-iscsi-devel-2.0.876-60.1 References: https://bugzilla.suse.com/1100351 https://bugzilla.suse.com/1102589 https://bugzilla.suse.com/1105916 https://bugzilla.suse.com/1111608

1 0

openSUSE-RU-2018:4269-1: Recommended update for python-six
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for python-six ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4269-1 Rating: low References: #1057496 #1113302 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: python-six was updated to 1.11.0. Changes: - `with_metaclass` now properly proxies `__prepare__` to the underlying metaclass. - Allow `with_metaclass` to work with metaclasses implemented in C. - Add parse_http_list and parse_keqv_list to moved urllib.request. - Add unquote_to_bytes to moved urllib.parse. - Add `six.moves.getoutput`. - Add `six.moves.urllib_parse.splitvalue`. - Add `six.moves.email_mime_image`. - Avoid creating reference cycles through tracebacks in `reraise`. - Improve the performance of `six.int2byte` on Python 3. - Don't add the `winreg` module to `six.moves` on non-Windows platforms. - Add `six.moves.getcwd` and `six.moves.getcwdu`. - Add `create_unbound_method` to create unbound methods. This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1609=1 Package List: - openSUSE Leap 42.3 (noarch): python-six-1.11.0-9.4.1 python-six-doc-1.11.0-9.4.1 python3-six-1.11.0-9.4.1 References: https://bugzilla.suse.com/1057496 https://bugzilla.suse.com/1113302

1 0

openSUSE-RU-2018:4268-1: Recommended update for hyper-v
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for hyper-v ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4268-1 Rating: low References: #1087658 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for hyper-v provides the following fixes: - Avoid reading past allocated blocks from KVP file. (bsc#1087658) - Update buffer handling in hv_fcopy_daemon. - Handle long paths correctly. - kvp: Make the path for external scripts configurable. - vss: Thaw the filesystem and continue if freeze call has timed out. - vss: Skip freezing filesystems backed by loop. This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1603=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): hyper-v-7-8.1 hyper-v-debuginfo-7-8.1 hyper-v-debugsource-7-8.1 References: https://bugzilla.suse.com/1087658

1 0

openSUSE-RU-2018:4267-1: moderate: Recommended update for psmisc
by maintenance＠opensuse.org 23 Dec '18

23 Dec '18

openSUSE Recommended Update: Recommended update for psmisc ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:4267-1 Rating: moderate References: #1098697 #1112780 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: This update for psmisc provides the following fix: - Make the fuser option -m <block_device> work even with mountinfo. (bsc#1098697) - Support also btrFS entries in mountinfo, that is use stat to determine the device of the mounted subvolume. (bsc#1098697, bsc#1112780) - Respect that the seventh field(s) before the single hyphen of mountinfo are optional fields. This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1601=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): psmisc-22.21-13.1 psmisc-debuginfo-22.21-13.1 psmisc-debugsource-22.21-13.1 - openSUSE Leap 42.3 (noarch): psmisc-lang-22.21-13.1 References: https://bugzilla.suse.com/1098697 https://bugzilla.suse.com/1112780

1 0