openSUSE Recommended Update: radvd: fix the radvd.service file to use /etc/sysconfig/radvd
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0416-1
Rating: low
References: #854316
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update fixes the following issue with radvd:
- bnc#854316: fix the radvd.service file to use
/etc/sysconfig/radvd
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-236
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (i586 x86_64):
radvd-1.9.rc1_git201206030100-5.4.1
radvd-debuginfo-1.9.rc1_git201206030100-5.4.1
radvd-debugsource-1.9.rc1_git201206030100-5.4.1
References:
https://bugzilla.novell.com/854316
openSUSE Recommended Update: pam: remove 'libtirpc' support from 'pam'
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0415-1
Rating: low
References: #853944
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update removes 'libtirpc' support from 'pam'. This is
needed before the new, fixed, libtirpc can be included into
openSUSE:13.1.
The effect on pam is that NIS lookup in pam_unix does not
work over IPv6. (bnc#853944)
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-235
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (i586 x86_64):
pam-1.1.8-6.1
pam-debuginfo-1.1.8-6.1
pam-debugsource-1.1.8-6.1
pam-devel-1.1.8-6.1
- openSUSE 13.1 (x86_64):
pam-32bit-1.1.8-6.1
pam-debuginfo-32bit-1.1.8-6.1
pam-devel-32bit-1.1.8-6.1
- openSUSE 13.1 (noarch):
pam-doc-1.1.8-6.1
References:
https://bugzilla.novell.com/853944
openSUSE Recommended Update: oxygen-gtk3: Update to latest bugfix release 1.3.4
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0410-1
Rating: low
References: #867253
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update fixes the following issues with oxygen-gtk3:
- Update from version 1.2.0 to version 1.3.4 (no changelog
provided from upstream)
- Bump minimal pkgconfig(gtk+-3.0) BuildRequires to >=
3.10.0
- bnc#867253: Fixed segfault in gnucash 2.6.2
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-231
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (i586 x86_64):
gtk3-engine-oxygen-1.3.4-2.4.1
gtk3-engine-oxygen-debuginfo-1.3.4-2.4.1
gtk3-theme-oxygen-1.3.4-2.4.1
gtk3-theme-oxygen-debuginfo-1.3.4-2.4.1
oxygen-gtk3-debugsource-1.3.4-2.4.1
- openSUSE 13.1 (x86_64):
gtk3-engine-oxygen-32bit-1.3.4-2.4.1
gtk3-engine-oxygen-debuginfo-32bit-1.3.4-2.4.1
gtk3-theme-oxygen-debuginfo-32bit-1.3.4-2.4.1
References:
https://bugzilla.novell.com/867253
openSUSE Recommended Update: ipsec-tools: Two recommended fixes
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0409-1
Rating: low
References: #856625 #867055
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has two recommended fixes can now be
installed.
Description:
This update fixes the following issues with ipsec-tools:
- bnc#856625: add RemainAfterExit=yes to the .service file
- bnc#867055: Remove ipsec-tools-linux-3.7-compat.diff
which caused bnc#867055 by including wrong headers; fix
by installing linux-glibc-devel and including
/usr/include for kernel headers
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-233
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (x86_64):
ipsec-tools-0.7.3-29.5.1
ipsec-tools-debuginfo-0.7.3-29.5.1
ipsec-tools-debugsource-0.7.3-29.5.1
- openSUSE 13.1 (i586):
ipsec-tools-0.7.3-29.5.2
ipsec-tools-debuginfo-0.7.3-29.5.2
ipsec-tools-debugsource-0.7.3-29.5.2
References:
https://bugzilla.novell.com/856625https://bugzilla.novell.com/867055
openSUSE Recommended Update: osc: Update to current version 0.144.1
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0408-1
Rating: moderate
References: #699224
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update fixes the following issues with osc:
- 0.144.1
+ fixed "osc meta pkg -e" regression for special package
names
- 0.144.0
+ allow commiting to package sources from linked
projects. osc will ask to branch it first.
+ group support in bugowner and maintainer command
- 0.143.0
+ add option to add a auto-accept in future for delete
requests (handy for admins)
+ many bugfixes:
* plugin loading
* bugowner handling
* download of server side generated source "up -S"
* wipebinaries command
- bnc#699224: Include COPYING file
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-232
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (noarch):
osc-0.144.1-2.8.1
References:
https://bugzilla.novell.com/699224
openSUSE Recommended Update: ipsec-tools: One recommended fix
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0407-1
Rating: low
References: #867055
Affected Products:
openSUSE 12.3
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update fixes the following issue with ipsec-tools:
- Remove ipsec-tools-linux-3.7-compat.diff which caused
bnc#867055 by including wrong headers; fix by installing
linux-glibc-devel and including /usr/include for kernel
headers
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 12.3:
zypper in -t patch openSUSE-2014-234
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 12.3 (i586 x86_64):
ipsec-tools-0.7.3-26.5.1
ipsec-tools-debuginfo-0.7.3-26.5.1
ipsec-tools-debugsource-0.7.3-26.5.1
References:
https://bugzilla.novell.com/867055
openSUSE Recommended Update: oxygen-gtk2: Update to latest bugfix release 1.4.4
______________________________________________________________________________
Announcement ID: openSUSE-RU-2014:0406-1
Rating: low
References: #867253
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that has one recommended fix can now be installed.
Description:
This update fixes the following issues with oxygen-gtk2:
- Update from version 1.4.0 to version 1.4.4 (no changelog
provided from upstream)
+ fixes for kde#329112, kde#324438, kde#328495 and
kde#325196.
+ bnc#867253: Fixed segfault in gnucash 2.6.2
Patch Instructions:
To install this openSUSE Recommended Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-230
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (i586 x86_64):
gtk2-engine-oxygen-1.4.4-2.4.1
gtk2-engine-oxygen-debuginfo-1.4.4-2.4.1
gtk2-theme-oxygen-1.4.4-2.4.1
gtk2-theme-oxygen-debuginfo-1.4.4-2.4.1
oxygen-gtk2-debugsource-1.4.4-2.4.1
- openSUSE 13.1 (x86_64):
gtk2-engine-oxygen-32bit-1.4.4-2.4.1
gtk2-engine-oxygen-debuginfo-32bit-1.4.4-2.4.1
gtk2-theme-oxygen-debuginfo-32bit-1.4.4-2.4.1
References:
https://bugzilla.novell.com/867253
openSUSE Security Update: samba: security and bugfix update
______________________________________________________________________________
Announcement ID: openSUSE-SU-2014:0405-1
Rating: moderate
References: #437293 #741623 #755663 #786677 #844307 #844720
#849224 #853021 #853347 #854520 #863748 #865561
Cross-References: CVE-2012-6150 CVE-2013-4408 CVE-2013-4496
Affected Products:
openSUSE 12.3
______________________________________________________________________________
An update that solves three vulnerabilities and has 9 fixes
is now available.
Description:
Samba was updated to fix security issues and bugs:
Security issues fixed:
- Password lockout was not enforced for SAMR password
changes, this allowed brute force attacks on passwords.
CVE-2013-4496; (bnc#849224).
- The DCE-RPC fragment length field is incorrectly checked,
which could expose samba clients to buffer overflow
exploits caused by malicious servers; CVE-2013-4408;
(bnc#844720).
- The pam_winbind login without require_membership_of
restrictions could allow fallbacks to local users even if
they were not intended to be allowed; CVE-2012-6150;
(bnc#853347).
Also non security bugs were fixed:
- Fix problem with server taking too long to respond to a
MSG_PRINTER_DRVUPGRADE message; (bso#9942); (bnc#863748).
- Fix memory leak in printer_list_get_printer();
(bso#9993); (bnc#865561).
- Depend on %version-%release with all manual Provides and
Requires; (bnc#844307).
- Remove superfluous obsoletes *-64bit in the ifarch ppc64
case; (bnc#437293).
- Fix Winbind 100% CPU utilization caused by domain list
corruption; (bso#10358); (bnc#786677).
- Samba is chatty about being unable to open a printer;
(bso#10118).
- nsswitch: Fix short writes in winbind_write_sock;
(bso#10195).
- xattr: fix listing EAs on *BSD for non-root users;
(bso#10247).
- spoolss: accept XPS_PASS datatype used by Windows 8;
(bso#10267).
- The preceding bugs are tracked by (bnc#854520) too.
- Make use of the full gpg pub key file name including the
key ID.
- Remove bogus libsmbclient0 package description and
cleanup the libsmbclient line from baselibs.conf;
(bnc#853021).
- Allow smbcacls to take a '--propagate-inheritance' flag
to indicate that the add, delete, modify and set
operations now support automatic propagation of
inheritable ACE(s); (FATE#316474).
- Attempt to use samlogon validation level 6; (bso#7945);
(bnc#741623).
- Recover from ncacn_ip_tcp ACCESS_DENIED/SEC_PKG_ERROR lsa
errors; (bso#7944); (bnc#755663).
- Fix lsa_LookupSids3 and lsa_LookupNames4 arguments.
- Use simplified smb signing infrastructure; (bnc#741623).
Patch Instructions:
To install this openSUSE Security Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 12.3:
zypper in -t patch openSUSE-2014-229
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 12.3 (i586 x86_64):
libnetapi-devel-3.6.12-59.19.1
libnetapi0-3.6.12-59.19.1
libnetapi0-debuginfo-3.6.12-59.19.1
libsmbclient-devel-3.6.12-59.19.1
libsmbclient0-3.6.12-59.19.1
libsmbclient0-debuginfo-3.6.12-59.19.1
libsmbsharemodes-devel-3.6.12-59.19.1
libsmbsharemodes0-3.6.12-59.19.1
libsmbsharemodes0-debuginfo-3.6.12-59.19.1
libwbclient-devel-3.6.12-59.19.1
libwbclient0-3.6.12-59.19.1
libwbclient0-debuginfo-3.6.12-59.19.1
samba-3.6.12-59.19.1
samba-client-3.6.12-59.19.1
samba-client-debuginfo-3.6.12-59.19.1
samba-debuginfo-3.6.12-59.19.1
samba-debugsource-3.6.12-59.19.1
samba-devel-3.6.12-59.19.1
samba-krb-printing-3.6.12-59.19.1
samba-krb-printing-debuginfo-3.6.12-59.19.1
samba-winbind-3.6.12-59.19.1
samba-winbind-debuginfo-3.6.12-59.19.1
- openSUSE 12.3 (x86_64):
libsmbclient0-32bit-3.6.12-59.19.1
libsmbclient0-debuginfo-32bit-3.6.12-59.19.1
libwbclient0-32bit-3.6.12-59.19.1
libwbclient0-debuginfo-32bit-3.6.12-59.19.1
samba-32bit-3.6.12-59.19.1
samba-client-32bit-3.6.12-59.19.1
samba-client-debuginfo-32bit-3.6.12-59.19.1
samba-debuginfo-32bit-3.6.12-59.19.1
samba-winbind-32bit-3.6.12-59.19.1
samba-winbind-debuginfo-32bit-3.6.12-59.19.1
- openSUSE 12.3 (noarch):
samba-doc-3.6.12-59.19.1
References:
http://support.novell.com/security/cve/CVE-2012-6150.htmlhttp://support.novell.com/security/cve/CVE-2013-4408.htmlhttp://support.novell.com/security/cve/CVE-2013-4496.htmlhttps://bugzilla.novell.com/437293https://bugzilla.novell.com/741623https://bugzilla.novell.com/755663https://bugzilla.novell.com/786677https://bugzilla.novell.com/844307https://bugzilla.novell.com/844720https://bugzilla.novell.com/849224https://bugzilla.novell.com/853021https://bugzilla.novell.com/853347https://bugzilla.novell.com/854520https://bugzilla.novell.com/863748https://bugzilla.novell.com/865561
openSUSE Security Update: samba: security and bugfix update to 4.1.6
______________________________________________________________________________
Announcement ID: openSUSE-SU-2014:0404-1
Rating: moderate
References: #437293 #726937 #786677 #844307 #846586 #849224
#855866 #856759 #857454 #860648 #860809 #860832
#861135 #862370 #862558 #863079 #863748 #865095
#865397 #865561 #865641 #865771 #867665
Cross-References: CVE-2013-4496 CVE-2013-6442
Affected Products:
openSUSE 13.1
______________________________________________________________________________
An update that solves two vulnerabilities and has 21 fixes
is now available.
Description:
Samba was updated to 4.1.6, fixing bugs and security issues:
- Password lockout not enforced for SAMR password changes,
this allowed brute forcing of passwords; CVE-2013-4496;
(bnc#849224).
- smbcacls can remove a file or directory ACL by mistake;
CVE-2013-6442; (bnc#855866).
Also the following bugs were fixed:
- Call update-apparmor-samba-profile via ExecStartPre too;
(bnc#867665).
- Retry named pipe open requests on
STATUS_PIPE_NOT_AVAILABLE; (bso#10484); (bnc#865095).
- Propagate snapshot enumeration permissions errors to SMB
clients; (bnc#865641).
- Properly handle empty 'requires_membership_of' entries in
/etc/security/pam_winbind.conf; (bnc#865771).
- Fix problem with server taking too long to respond to a
MSG_PRINTER_DRVUPGRADE message; (bso#9942); (bnc#863748).
- Fix memory leak in printer_list_get_printer();
(bso#9993); (bnc#865561).
- Fix stream_depot VFS module on Btrfs; (bso#10467);
(bnc#865397).
- Use libarchive to provide improved smbclient tarmode
functionality; (bso#9667); (bnc#861135).
- Depend on %version-%release with all manual Provides and
Requires; (bnc#844307).
- Update to 4.1.5.
+ Fix 100% CPU utilization in winbindd when trying to
free memory in winbindd_reinit_after_fork; (bso#10358);
(bnc#786677).
+ smbd: Fix memory overwrites; (bso#10415).
+ s3-winbind: Improve performance of
wb_fill_pwent_sid2uid_done(); (bso#2191).
+ ntlm_auth sometimes returns the wrong username to
mod_ntlm_auth_winbind; (bso#10087).
+ s3: smbpasswd: Fix crashes on invalid input;
(bso#10320).
+ s3: vfs_dirsort module: Allow dirsort to work when
multiple simultaneous directories are open; (bso#10406).
+ Add support for Heimdal's unified krb5 and hdb plugin
system, cope with first element in hdb_method having a
different name in different heimdal versions and fix
INTERNAL ERROR: Signal 11 in the kdc pid; (bso#10418).
+ vfs_btrfs: Fix incorrect zero length server-side copy
request handling; (bso#10424).
+ s3: modules: streaminfo: As we have no VFS function
SMB_VFS_LLISTXATTR we can't cope with a symlink when
lp_posix_pathnames() is true; (bso#10429).
+ smbd: Fix an ancient oplock bug; (bso#10436).
+ Fix crash bug in smb2_notify code; (bso#10442).
- Remove superfluous obsoletes *-64bit in the ifarch ppc64
case; (bnc#437293).
- Migrate @GMT token parsing functionality into
vfs_snapper; (bnc#863079).
+ Improve vfs_snapper documentation.
- Fix Winbind 100% CPU utilization caused by domain list
corruption; (bso#10358); (bnc#786677).
- Fix memory overwrite in FSCTL_VALIDATE_NEGOTIATE_INFO
handler; (bso#10415); (bnc#862370).
- Streamline the vendor suffix handling and add support for
SLE 12.
- Fix zero length server-side copy request handling;
(bso#10424); (bnc#862558).
- Set the PID directory to /run/samba on post-12.2 systems.
- Make use of the tmpfilesdir macro while calling
systemd-tmpfiles.
- Make winbindd print the interface version when it gets an
INTERFACE_VERSION request; (bnc#726937).
- Fix vfs_btrfs build on older platforms with duplicate
WRITE_FLUSH definitions; (bnc#860832).
- Check for NULL gensec_security in
gensec_security_by_auth_type(); (bnc#860809).
- Ensure ndr table initialization; (bnc#860648).
- Add File Server Remote VSS Protocol (FSRVP) server for
SMB share shadow-copies; (fate#313346).
- s3-dir: Fix the DOS clients against 64-bit smbd's;
(bso#2662).
- shadow_copy2: module "Previous Version" not working in
Windows 7; (bso#10259).
- s3-passdb: Fix string duplication to pointers;
(bso#10367).
- vfs/glusterfs: in case atime is not passed, set it to the
current atime; (bso#10384)
- s3: winbindd: Move calling setup_domain_child() into
add_trusted_domain(); (bso#10358); (bnc#786677).
- Default sysconfig daemon options to -D; (bso#10388);
(bnc#857454).
- Add /var/cache/samba to the client file list;
(bnc#846586).
- Really add the WINBINDDOPTIONS sysconfig variable on
install; (bnc#857454).
- Correct sysconfig variable names by adding the missing D
char; (bnc#857454).
- Update to 4.1.4.
+ Fix segfault in smbd; (bso#10284).
+ Fix SMB2 server panic when a smb2 brlock times out;
(bso#10311).
- Call stop_on_removal from preun and restart_on_update and
insserv_cleanup from postun on pre-12.3 systems only;
(bnc#857454).
- BuildRequire gamin-devel instead of unmaintained
fam-devel package on post-12.1 systems.
- smbd: allow updates on directory write times on open
handles; (bso#9870).
- lib/util: use proper include for struct stat; (bso#10276).
- s3:winbindd fix use of uninitialized variables;
(bso#10280).
- s3-winbindd: Fix DEBUG statement in
winbind_msg_offline(); (bso#10285).
- s3-lib: Fix %G substitution for domain users in smbd;
(bso#10286).
- smbd: Always use UCF_PREP_CREATEFILE for filename_convert
calls to resolve a path for open; (bso#10297).
- smb2_server processing overhead; (bso#10298).
- ldb: bad if test in ldb_comparison_fold(); (bso#10305).
- Fix AIO with SMB2 and locks; (bso#10310).
- smbd: Fix a panic when a smb2 brlock times out;
(bso#10311).
- vfs_glusterfs: Enable per client log file; (bso#10337).
- Add /etc/sysconfig/samba to the main and winbind package;
(bnc#857454).
- Create /var/run/samba with systemd-tmpfiles on post-12.2
systems; (bnc#856759).
- Fix broken rc{nmb,smb,winbind} sym links which should
point to the service binary on post-12.2 systems;
(bnc#856759).
- Add Snapper VFS module for snapshot manipulation;
(fate#313347).
+ dbus-1-devel required at build time.
- Add File Server Remote VSS Protocol (FSRVP) client for
SMB share shadow-copies; (fate#313345).
- Do not BuildRequire perl ExtUtils::MakeMaker and
Parse::Yapp as they're part of the minimum build
environment.
- Allow smbcacls to take a '--propagate-inheritance' flag
to indicate that the add, delete, modify and set
operations now support automatic propagation of
inheritable ACE(s); (FATE#316474).
Patch Instructions:
To install this openSUSE Security Update use YaST online_update.
Alternatively you can run the command listed for your product:
- openSUSE 13.1:
zypper in -t patch openSUSE-2014-228
To bring your system up-to-date, use "zypper patch".
Package List:
- openSUSE 13.1 (i586 x86_64):
libdcerpc-atsvc-devel-4.1.6-3.18.1
libdcerpc-atsvc0-4.1.6-3.18.1
libdcerpc-atsvc0-debuginfo-4.1.6-3.18.1
libdcerpc-binding0-4.1.6-3.18.1
libdcerpc-binding0-debuginfo-4.1.6-3.18.1
libdcerpc-devel-4.1.6-3.18.1
libdcerpc-samr-devel-4.1.6-3.18.1
libdcerpc-samr0-4.1.6-3.18.1
libdcerpc-samr0-debuginfo-4.1.6-3.18.1
libdcerpc0-4.1.6-3.18.1
libdcerpc0-debuginfo-4.1.6-3.18.1
libgensec-devel-4.1.6-3.18.1
libgensec0-4.1.6-3.18.1
libgensec0-debuginfo-4.1.6-3.18.1
libndr-devel-4.1.6-3.18.1
libndr-krb5pac-devel-4.1.6-3.18.1
libndr-krb5pac0-4.1.6-3.18.1
libndr-krb5pac0-debuginfo-4.1.6-3.18.1
libndr-nbt-devel-4.1.6-3.18.1
libndr-nbt0-4.1.6-3.18.1
libndr-nbt0-debuginfo-4.1.6-3.18.1
libndr-standard-devel-4.1.6-3.18.1
libndr-standard0-4.1.6-3.18.1
libndr-standard0-debuginfo-4.1.6-3.18.1
libndr0-4.1.6-3.18.1
libndr0-debuginfo-4.1.6-3.18.1
libnetapi-devel-4.1.6-3.18.1
libnetapi0-4.1.6-3.18.1
libnetapi0-debuginfo-4.1.6-3.18.1
libpdb-devel-4.1.6-3.18.1
libpdb0-4.1.6-3.18.1
libpdb0-debuginfo-4.1.6-3.18.1
libregistry-devel-4.1.6-3.18.1
libregistry0-4.1.6-3.18.1
libregistry0-debuginfo-4.1.6-3.18.1
libsamba-credentials-devel-4.1.6-3.18.1
libsamba-credentials0-4.1.6-3.18.1
libsamba-credentials0-debuginfo-4.1.6-3.18.1
libsamba-hostconfig-devel-4.1.6-3.18.1
libsamba-hostconfig0-4.1.6-3.18.1
libsamba-hostconfig0-debuginfo-4.1.6-3.18.1
libsamba-policy-devel-4.1.6-3.18.1
libsamba-policy0-4.1.6-3.18.1
libsamba-policy0-debuginfo-4.1.6-3.18.1
libsamba-util-devel-4.1.6-3.18.1
libsamba-util0-4.1.6-3.18.1
libsamba-util0-debuginfo-4.1.6-3.18.1
libsamdb-devel-4.1.6-3.18.1
libsamdb0-4.1.6-3.18.1
libsamdb0-debuginfo-4.1.6-3.18.1
libsmbclient-devel-4.1.6-3.18.1
libsmbclient-raw-devel-4.1.6-3.18.1
libsmbclient-raw0-4.1.6-3.18.1
libsmbclient-raw0-debuginfo-4.1.6-3.18.1
libsmbclient0-4.1.6-3.18.1
libsmbclient0-debuginfo-4.1.6-3.18.1
libsmbconf-devel-4.1.6-3.18.1
libsmbconf0-4.1.6-3.18.1
libsmbconf0-debuginfo-4.1.6-3.18.1
libsmbldap-devel-4.1.6-3.18.1
libsmbldap0-4.1.6-3.18.1
libsmbldap0-debuginfo-4.1.6-3.18.1
libsmbsharemodes-devel-4.1.6-3.18.1
libsmbsharemodes0-4.1.6-3.18.1
libsmbsharemodes0-debuginfo-4.1.6-3.18.1
libtevent-util-devel-4.1.6-3.18.1
libtevent-util0-4.1.6-3.18.1
libtevent-util0-debuginfo-4.1.6-3.18.1
libwbclient-devel-4.1.6-3.18.1
libwbclient0-4.1.6-3.18.1
libwbclient0-debuginfo-4.1.6-3.18.1
samba-4.1.6-3.18.1
samba-client-4.1.6-3.18.1
samba-client-debuginfo-4.1.6-3.18.1
samba-core-devel-4.1.6-3.18.1
samba-debuginfo-4.1.6-3.18.1
samba-debugsource-4.1.6-3.18.1
samba-libs-4.1.6-3.18.1
samba-libs-debuginfo-4.1.6-3.18.1
samba-pidl-4.1.6-3.18.1
samba-python-4.1.6-3.18.1
samba-python-debuginfo-4.1.6-3.18.1
samba-test-4.1.6-3.18.1
samba-test-debuginfo-4.1.6-3.18.1
samba-test-devel-4.1.6-3.18.1
samba-winbind-4.1.6-3.18.1
samba-winbind-debuginfo-4.1.6-3.18.1
- openSUSE 13.1 (x86_64):
libdcerpc-atsvc0-32bit-4.1.6-3.18.1
libdcerpc-atsvc0-debuginfo-32bit-4.1.6-3.18.1
libdcerpc-binding0-32bit-4.1.6-3.18.1
libdcerpc-binding0-debuginfo-32bit-4.1.6-3.18.1
libdcerpc-samr0-32bit-4.1.6-3.18.1
libdcerpc-samr0-debuginfo-32bit-4.1.6-3.18.1
libdcerpc0-32bit-4.1.6-3.18.1
libdcerpc0-debuginfo-32bit-4.1.6-3.18.1
libgensec0-32bit-4.1.6-3.18.1
libgensec0-debuginfo-32bit-4.1.6-3.18.1
libndr-krb5pac0-32bit-4.1.6-3.18.1
libndr-krb5pac0-debuginfo-32bit-4.1.6-3.18.1
libndr-nbt0-32bit-4.1.6-3.18.1
libndr-nbt0-debuginfo-32bit-4.1.6-3.18.1
libndr-standard0-32bit-4.1.6-3.18.1
libndr-standard0-debuginfo-32bit-4.1.6-3.18.1
libndr0-32bit-4.1.6-3.18.1
libndr0-debuginfo-32bit-4.1.6-3.18.1
libnetapi0-32bit-4.1.6-3.18.1
libnetapi0-debuginfo-32bit-4.1.6-3.18.1
libpdb0-32bit-4.1.6-3.18.1
libpdb0-debuginfo-32bit-4.1.6-3.18.1
libregistry0-32bit-4.1.6-3.18.1
libregistry0-debuginfo-32bit-4.1.6-3.18.1
libsamba-credentials0-32bit-4.1.6-3.18.1
libsamba-credentials0-debuginfo-32bit-4.1.6-3.18.1
libsamba-hostconfig0-32bit-4.1.6-3.18.1
libsamba-hostconfig0-debuginfo-32bit-4.1.6-3.18.1
libsamba-policy0-32bit-4.1.6-3.18.1
libsamba-policy0-debuginfo-32bit-4.1.6-3.18.1
libsamba-util0-32bit-4.1.6-3.18.1
libsamba-util0-debuginfo-32bit-4.1.6-3.18.1
libsamdb0-32bit-4.1.6-3.18.1
libsamdb0-debuginfo-32bit-4.1.6-3.18.1
libsmbclient-raw0-32bit-4.1.6-3.18.1
libsmbclient-raw0-debuginfo-32bit-4.1.6-3.18.1
libsmbclient0-32bit-4.1.6-3.18.1
libsmbclient0-debuginfo-32bit-4.1.6-3.18.1
libsmbconf0-32bit-4.1.6-3.18.1
libsmbconf0-debuginfo-32bit-4.1.6-3.18.1
libsmbldap0-32bit-4.1.6-3.18.1
libsmbldap0-debuginfo-32bit-4.1.6-3.18.1
libtevent-util0-32bit-4.1.6-3.18.1
libtevent-util0-debuginfo-32bit-4.1.6-3.18.1
libwbclient0-32bit-4.1.6-3.18.1
libwbclient0-debuginfo-32bit-4.1.6-3.18.1
samba-32bit-4.1.6-3.18.1
samba-client-32bit-4.1.6-3.18.1
samba-client-debuginfo-32bit-4.1.6-3.18.1
samba-debuginfo-32bit-4.1.6-3.18.1
samba-libs-32bit-4.1.6-3.18.1
samba-libs-debuginfo-32bit-4.1.6-3.18.1
samba-winbind-32bit-4.1.6-3.18.1
samba-winbind-debuginfo-32bit-4.1.6-3.18.1
- openSUSE 13.1 (noarch):
samba-doc-4.1.6-3.18.1
References:
http://support.novell.com/security/cve/CVE-2013-4496.htmlhttp://support.novell.com/security/cve/CVE-2013-6442.htmlhttps://bugzilla.novell.com/437293https://bugzilla.novell.com/726937https://bugzilla.novell.com/786677https://bugzilla.novell.com/844307https://bugzilla.novell.com/846586https://bugzilla.novell.com/849224https://bugzilla.novell.com/855866https://bugzilla.novell.com/856759https://bugzilla.novell.com/857454https://bugzilla.novell.com/860648https://bugzilla.novell.com/860809https://bugzilla.novell.com/860832https://bugzilla.novell.com/861135https://bugzilla.novell.com/862370https://bugzilla.novell.com/862558https://bugzilla.novell.com/863079https://bugzilla.novell.com/863748https://bugzilla.novell.com/865095https://bugzilla.novell.com/865397https://bugzilla.novell.com/865561https://bugzilla.novell.com/865641https://bugzilla.novell.com/865771https://bugzilla.novell.com/867665