March 2008 - Radeon HD - openSUSE Mailing Lists

AMD-chipset 780G/780V support
by Igor 14 Apr '08

14 Apr '08

Hi will be in the radeonHD the support for new AMD chipsets - 780G/HD3200 and 780V/HD3100 ? Igor -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

5 4

[Bug 15291] New: I need option "HDP" "off"
by bugzilla-daemon＠freedesktop.org 07 Apr '08

07 Apr '08

http://bugs.freedesktop.org/show_bug.cgi?id=15291 Summary: I need option "HDP" "off" Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: roman(a)hodek.net QAContact: xorg-team(a)lists.x.org In section 9.2 of the radeonhd FAQ you request reports if the option "HDP" is required to get a monitor working. Here is one :) After radeonhd 1.1 had been installed during a Debian update, my X server didn't start anymore. The last (relevant) message was that no valid modes were found, and a few lines above that my output DVI-I_1/analog has been detected as disconnected. A quick look at the wiki revealed what's the problem and how to cure it, no problem so far. My card is a MSI HD2600 AGP (the fanless one), the BIOS string is "113-MSITV108MS.110 RV630PRO HYNIX 32MX16 512MB". The monitor is a 21'' Eizo, attached via BNC cable (no DDC data!) Roman -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

[Bug 15141] New: VT switch not working without Option "HPD" "off"
by bugzilla-daemon＠freedesktop.org 07 Apr '08

07 Apr '08

http://bugs.freedesktop.org/show_bug.cgi?id=15141 Summary: VT switch not working without Option "HPD" "off" Product: xorg Version: 7.3 Platform: x86-64 (AMD64) URL: http://lists.opensuse.org/radeonhd/2008-03/msg00115.html OS/Version: FreeBSD Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: nakal(a)web.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=15333) --> (http://bugs.freedesktop.org/attachment.cgi?id=15333) X log This is actually a follow-up after the discussion with Matthias Hopf. The problem is that after starting X without specifying "Option HPD off" in xorg.conf, the server won't switch back to text terminal correctly. After pressing <Ctrl>+<Alt>+<Backspace> or switching using <Ctrl>+<Alt>+<F1> the screen enters power-save mode. Log file attached where "Option HPD off" has been commented out and where the problem occurs. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 8

[Bug 15142] New: static multimonitor setup not working
by bugzilla-daemon＠freedesktop.org 04 Apr '08

04 Apr '08

http://bugs.freedesktop.org/show_bug.cgi?id=15142 Summary: static multimonitor setup not working Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: mail(a)sebastian-brocks.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=15334) --> (http://bugs.freedesktop.org/attachment.cgi?id=15334) logfile My static multimonitor configured via the attached xorg.conf is no longer working, after reinstalling my OS completely. Also attached is Xorg.0.log, with -logverbose 7. With an appropriate Virtual size set, I can do it dynamically by calling xrandr, but i'd like the static setup to work. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 12

[Bug 15214] New: regression in radeonhd driver?
by bugzilla-daemon＠freedesktop.org 03 Apr '08

03 Apr '08

http://bugs.freedesktop.org/show_bug.cgi?id=15214 Summary: regression in radeonhd driver? Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: apersaud(a)lbl.gov QAContact: xorg-team(a)lists.x.org Created an attachment (id=15478) --> (http://bugs.freedesktop.org/attachment.cgi?id=15478) Xorg log file New version of radeonhd driver (xorg-x11-driver-video-radeonhd-1.1.0_080320_96f3633-1.1.x86_64.rpm) from http://download.opensuse.org/repositories/X11:/Drivers:/Video:/radeonhd/ope… doesn't work on my computer. Had a version installed from the same repository at the end of January, perhaps beginning of February (sorry, don't remember the revision, think it was something like 1.1.0-0.9.3??) which worked fine. Attached are two log files. HTH -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 16

[Bug 15292] New: 0x9501:0x1002:0x2542:HIS Radeon HD 3870 with 512MB
by bugzilla-daemon＠freedesktop.org 01 Apr '08

01 Apr '08

http://bugs.freedesktop.org/show_bug.cgi?id=15292 Summary: 0x9501:0x1002:0x2542:HIS Radeon HD 3870 with 512MB Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: Jimmy.Jazz(a)gmx.net QAContact: xorg-team(a)lists.x.org Created an attachment (id=15586) --> (http://bugs.freedesktop.org/attachment.cgi?id=15586) xorg log file Hello, The video card has been tested at resolutions 1680x1050 and 1280x1024 on a flat panel with the following options activated: (**) RADEONHD(0): Option "shadowfb" "on" (**) RADEONHD(0): Option "forcereduced" "on" (**) RADEONHD(0): Option "HPD" "auto" and works quite well. The mainboard uses an AMD Phenom(tm) 9500 Quad-Core Processor with 4Go of RAM and an AMD 770 controller... i.e. full AMD :) But the radeonhd driver is unable to use all the 512Mo of video memory and has a really initial small framebuffer of 16kb. Moreover the driver complains about an unavailable VRAM scratch space. lspci returns, 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9501 And here is an excerpt of the xorg log output, (--) Chipset RV670 found (**) RADEONHD(0): Depth 24, (**) framebuffer bpp 32 (**) RADEONHD(0): Option "shadowfb" "on" (**) RADEONHD(0): Option "forcereduced" "on" (**) RADEONHD(0): Option "HPD" "auto" (II) RADEONHD(0): Unknown card detected: 0x9501:0x1002:0x2542. If - and only if - your card does not work or does not work optimally please contact radeonhd(a)opensuse.org to help rectify this. Use the subject: 0x9501:0x1002:0x2542: <name of board>. (--) RADEONHD(0): Detected an RV670 on an unidentified card (II) RADEONHD(0): Mapped IO at 0x7ff13c568000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x2542 IOBaseAddress: 0xde00 Filename: S3B33904.102 BIOS Bootup Message: ^M 113-B33904-102 RV670 GDDR4_16Mx32 256bit 512MB 777e/1126m ^M (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000 (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture. (II) RADEONHD(0): Using only 262144kB of the total 524288kB. (--) RADEONHD(0): VideoRAM: 262144 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000 (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456 (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead (II) RADEONHD(0): Default Engine Clock: 777000 (II) RADEONHD(0): Default Memory Clock: 1126000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 ... (II) RADEONHD(0): Mapped IO at 0x7f243e137000 (size 0x00010000) (==) RADEONHD(0): Write-combining range (0xd0000000,0x10000000) (II) RADEONHD(0): Mapped FB at 0x7f24298ef000 (size 0x10000000) (EE) RADEONHD(0): RHDVGASave: VGA FB Offset (0xE0000000) is out of range of the Cards Internal FB Address (0xD0000000) (II) RADEONHD(0): Using 31743 scanlines of offscreen memory (**) RADEONHD(0): Option "BackingStore" "on" (**) RADEONHD(0): Backing store enabled (**) RADEONHD(0): Option "SilkenMouse" "on" (**) RADEONHD(0): Silken mouse enabled (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message. (EE) RADEONHD(0): TMDSBVoltageControl: unhandled chipset: 0x9501. (II) RADEONHD(0): LVTMA_MACRO_CONTROL: 0x0533040B (II) RADEONHD(0): LVTMA_TRANSMITTER_ADJUST: 0x02A01000 (II) RADEONHD(0): LVTMA_PREEMPHASIS_CONTROL: 0x41002045 (II) RADEONHD(0): Using HW cursor (**) Option "dpms" (**) RADEONHD(0): DPMS enabled -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 3

Re: [radeonhd] Sapphire X1600 PCIe board unkown
by Egbert Eich 31 Mar '08

31 Mar '08

John Stoffel writes: > > Hi all, > I'm using the latest GIT version of the RadeonHD code (as of 10pm EST, > tonight) and playing around a bit with rhd_conntest. Here's the > output I get: > > > sudo utils/conntest/rhd_conntest -d 03:00.1 > rhd_conntest: v1.1.0, git branch master, commit 1623f86f > Unknown device: 0x1002:0x71E3 (03:00.01). > > Is there anything I can provide? Here's the lspcii -vvv output: > > 03:00.1 Display controller: ATI Technologies Inc Unknown device 71e3 > (rev 9e) This is a secondary device. It's not the GPU and this PCI ID must not be matched. > > > I tried hacking the src/rhd_id.c but that didn't help. Hmmm wait a > second, it works if I do: > > > sudo utils/conntest/rhd_conntest -d 03:00.0 > rhd_conntest: v1.1.0, git branch master, commit 1623f86f + changes > Checking connectors on 0x71C3, 0x1043, 0x01AC (@03:00:00): > Load Detection: RHD_OUTPUT_DACA > HotPlug: RHD_HPD_NONE > DDC: RHD_DDC_0 > This is correct. > > Though it's still not showing that it's a RV535 chipset. At least rhd_conntest doesn't show the chip name. > I'm not sure what it's showing. :] This is hooked up via the VGA > port (the board has one VGA, one DVI and one S-Video output. It's > Sapphire EAX1600PRO SILENT/TD/512M recently gotten from NewEgg. So do you get output? > > I'm eagerly looking forward to more and better 2d and 3d acceleration. > Is in the works. > In my basic testing, the Radeon and RadeonHD drivers both gave > identical glxgears results of ~1100 FPS. Ok, so it's working. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

Dual head configuration
by Fredrik Jonson 31 Mar '08

31 Mar '08

Hi, I've been running radeonhd on a Sapphire HD 2400 Pro PCI-e, and it has been working flawlessly since radeonhd entered Debian sid in September 2007. Thanks! I have tried to configure dual head - and the kind[0] where you divide the gnome workspace on a superwide virtual desktop works fine. Now, what I'd really like is to be able to have individual workspaces on the monitors separately - while sharing the same Gnome and X session. For example, I want to be able to show workspace 1 on the left monitor while I see workspace 2 on the next. I would also like to be able to switch workspaces individually on each monitor. I would be greatful if you could tell me if this is possible, and if so how to configure it. [0] Dual head terminology in X is a absolute maze of weird words meaning almost but not exactly the same thing. -- Fredrik Jonson -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

xf86-video-radeonhd:master: 4 commit(s)
by eich＠kemper.freedesktop.org 31 Mar '08

31 Mar '08

Reporting from xf86-video-radeonhd: Radeon HD video driver Please visit: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd Or get your own copy by using: git-clone git://anongit.freedesktop.org/xorg/driver/xf86-video-radeonhd 4 commits against master at 1623f86f...: src/rhd_atombios.c | 14 +++++++------- src/rhd_ddia.c | 6 ++++++ src/rhd_lvtma.c | 2 +- src/rhd_regs.h | 7 +++++++ 4 files changed, 21 insertions(+), 8 deletions(-) commit db2c3948d5a398047b3a881f6f88541dc963d22e Author: Egbert Eich <eich(a)freedesktop.org> Date: Mon Mar 31 08:12:44 2008 +0200 Fix LVTMA code to also handle single link DVI correctly. Bug #15214 diffstat: src/rhd_lvtma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… commit 55e3b21e709c2a14ff7153e2044a4921f30b82f2 Author: Egbert Eich <eich(a)freedesktop.org> Date: Mon Mar 31 08:10:33 2008 +0200 HDMI Type A is single link DVI while B is dual link. This is a follow up on 806d95361c11068a078. diffstat: src/rhd_atombios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… commit d53f2201b5d82936b190fb5b5fe2701f5e083aeb Author: Egbert Eich <eich(a)freedesktop.org> Date: Mon Mar 31 00:49:07 2008 +0200 Add source select to DDIA block. This code got dropped on the floor by accident. diffstat: src/rhd_ddia.c | 6 ++++++ src/rhd_regs.h | 7 +++++++ 2 files changed, 13 insertions(+) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… commit be9055f03a8a4759fbdf454ad4c2c4e215ead1df Author: Egbert Eich <eich(a)freedesktop.org> Date: Sat Mar 29 14:21:33 2008 +0100 Fixed argument order to rhdAtomGetTableRevisionAndSize(). diffstat: src/rhd_atombios.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) gitweb url: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-radeonhd;a=commit;h… -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Sapphire X1600 PCIe board unkown
by John Stoffel 29 Mar '08

29 Mar '08

Hi all, I'm using the latest GIT version of the RadeonHD code (as of 10pm EST, tonight) and playing around a bit with rhd_conntest. Here's the output I get: > sudo utils/conntest/rhd_conntest -d 03:00.1 rhd_conntest: v1.1.0, git branch master, commit 1623f86f Unknown device: 0x1002:0x71E3 (03:00.01). Is there anything I can provide? Here's the lspcii -vvv output: 03:00.1 Display controller: ATI Technologies Inc Unknown device 71e3 (rev 9e) Subsystem: ASUSTeK Computer Inc. Unknown device 01ad Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at fdce0000 (64-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 I tried hacking the src/rhd_id.c but that didn't help. Hmmm wait a second, it works if I do: > sudo utils/conntest/rhd_conntest -d 03:00.0 rhd_conntest: v1.1.0, git branch master, commit 1623f86f + changes Checking connectors on 0x71C3, 0x1043, 0x01AC (@03:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 Though it's still not showing that it's a RV535 chipset. At least I'm not sure what it's showing. :] This is hooked up via the VGA port (the board has one VGA, one DVI and one S-Video output. It's Sapphire EAX1600PRO SILENT/TD/512M recently gotten from NewEgg. I'm eagerly looking forward to more and better 2d and 3d acceleration. In my basic testing, the Radeon and RadeonHD drivers both gave identical glxgears results of ~1100 FPS. John -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0