[Bug 15292] New: 0x9501:0x1002:0x2542:HIS Radeon HD 3870 with 512MB
http://bugs.freedesktop.org/show_bug.cgi?id=15292 Summary: 0x9501:0x1002:0x2542:HIS Radeon HD 3870 with 512MB Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen@suse.de ReportedBy: Jimmy.Jazz@gmx.net QAContact: xorg-team@lists.x.org Created an attachment (id=15586) --> (http://bugs.freedesktop.org/attachment.cgi?id=15586) xorg log file Hello, The video card has been tested at resolutions 1680x1050 and 1280x1024 on a flat panel with the following options activated: (**) RADEONHD(0): Option "shadowfb" "on" (**) RADEONHD(0): Option "forcereduced" "on" (**) RADEONHD(0): Option "HPD" "auto" and works quite well. The mainboard uses an AMD Phenom(tm) 9500 Quad-Core Processor with 4Go of RAM and an AMD 770 controller... i.e. full AMD :) But the radeonhd driver is unable to use all the 512Mo of video memory and has a really initial small framebuffer of 16kb. Moreover the driver complains about an unavailable VRAM scratch space. lspci returns, 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9501 And here is an excerpt of the xorg log output, (--) Chipset RV670 found (**) RADEONHD(0): Depth 24, (**) framebuffer bpp 32 (**) RADEONHD(0): Option "shadowfb" "on" (**) RADEONHD(0): Option "forcereduced" "on" (**) RADEONHD(0): Option "HPD" "auto" (II) RADEONHD(0): Unknown card detected: 0x9501:0x1002:0x2542. If - and only if - your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x9501:0x1002:0x2542: <name of board>. (--) RADEONHD(0): Detected an RV670 on an unidentified card (II) RADEONHD(0): Mapped IO at 0x7ff13c568000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x2542 IOBaseAddress: 0xde00 Filename: S3B33904.102 BIOS Bootup Message: ^M 113-B33904-102 RV670 GDDR4_16Mx32 256bit 512MB 777e/1126m ^M (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000 (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture. (II) RADEONHD(0): Using only 262144kB of the total 524288kB. (--) RADEONHD(0): VideoRAM: 262144 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000 (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456 (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead (II) RADEONHD(0): Default Engine Clock: 777000 (II) RADEONHD(0): Default Memory Clock: 1126000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 ... (II) RADEONHD(0): Mapped IO at 0x7f243e137000 (size 0x00010000) (==) RADEONHD(0): Write-combining range (0xd0000000,0x10000000) (II) RADEONHD(0): Mapped FB at 0x7f24298ef000 (size 0x10000000) (EE) RADEONHD(0): RHDVGASave: VGA FB Offset (0xE0000000) is out of range of the Cards Internal FB Address (0xD0000000) (II) RADEONHD(0): Using 31743 scanlines of offscreen memory (**) RADEONHD(0): Option "BackingStore" "on" (**) RADEONHD(0): Backing store enabled (**) RADEONHD(0): Option "SilkenMouse" "on" (**) RADEONHD(0): Silken mouse enabled (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message. (EE) RADEONHD(0): TMDSBVoltageControl: unhandled chipset: 0x9501. (II) RADEONHD(0): LVTMA_MACRO_CONTROL: 0x0533040B (II) RADEONHD(0): LVTMA_TRANSMITTER_ADJUST: 0x02A01000 (II) RADEONHD(0): LVTMA_PREEMPHASIS_CONTROL: 0x41002045 (II) RADEONHD(0): Using HW cursor (**) Option "dpms" (**) RADEONHD(0): DPMS enabled -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team@lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
http://bugs.freedesktop.org/show_bug.cgi?id=15292
Egbert Eich
http://bugs.freedesktop.org/show_bug.cgi?id=15292
--- Comment #2 from Jimmy Jazz
None of this is a problem: We can only map half of the VRAM ie 256 MB as you can see from the log: (II) RADEONHD(0): Using only 262144kB of the total 524288kB. (--) RADEONHD(0): VideoRAM: 262144 kByte The firmware itself reserves 16kB: (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 The unavailable VRAM scratch space is not issue ATM. It is more a notice for debugging purposes.
Certainly a silly question, but does it mean radeonhd driver won't be able to support more than 256MB of vram or is it just a restriction of the 2D mode of the videocard because of the bus or something ? Otherwise does it apply to the 3D mode too ? If only half of the 512MB of vram is mappable I will instead consider buying a 256MB only radeonhd videocard in the near future with the benefit to consume less power :) I really appreciate your work. The driver is rock stable. It is fast enough for a commun use with the shadow framebuffer mode activated and the videocard is still silent. I'm really eager to test compiz-fusion with the upcoming accelerated driver as soon as it will be available for testing. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team@lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
http://bugs.freedesktop.org/show_bug.cgi?id=15292
--- Comment #3 from Matthias Hopf
participants (1)
-
bugzilla-daemon@freedesktop.org