- openSUSE Bugs

[Bug 227351] New: Installation fails just after/at the end of probing harddisks
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=227351 Summary: Installation fails just after/at the end of probing harddisks Product: openSUSE 10.2 Version: Final Platform: 32bit OS/Version: Linux Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jarl(a)yaeda.org QAContact: jsrain(a)novell.com It goes into textmode saying An error occourred during the installation. Switching to other screens does'nt reveal any serious errors just IO error on fd0 etc. The last message I can see is device-mapper; ioctl.... Startup... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 226978] New: Networked installation defaults to Wireless in PXE environment
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=226978 Summary: Networked installation defaults to Wireless in PXE environment Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: per.lindahl(a)bea.com QAContact: jsrain(a)novell.com Hi, The server is running debian ppc and the client is a Dell Latitude C640 with an ipw2200 compatible wireless card beside the internal 3com card. I PXE booted the installation on the C640 and it recognized the system as a Dell Latitude C640 with the above mentioned newtork interfaces. When i reached the first part of the installation Yast asked me for my wireless settings (which is fine). Since I don't use wireless I just chose OK in all the following dialogs. which resolted in the installation system not finding the installation server. Due to the installation system choosing wlan over lan. To get it to work I had to unload the ipw2200 module and then chose networked installation. Then I got to choose the eth0 as my installation device(3com). After this I could continue the network installation and so far everything has gone well. Regards, Per -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 229559] New: squirrelmail update packages ought not to overwrite config/config_local.php
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=229559 Summary: squirrelmail update packages ought not to overwrite config/config_local.php Product: SUSE Linux 10.1 Version: Final Platform: i686 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ken(a)turnkey.com.au QAContact: qa(a)suse.de The RPM spec file should specify this as a config file that will not be overwritten, and that instead the one from the package should be renamed config_local.php.rpmnew so that any existing configuration will not be deleted. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 229742] New: Squirrelmail broken on latest update
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=229742 Summary: Squirrelmail broken on latest update Product: SUSE Linux 10.1 Version: Final Platform: x86 OS/Version: SuSE Linux 10.0 Status: NEW Severity: Blocker Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nigel(a)bprj.co.uk QAContact: qa(a)suse.de SuSE 10.0 There was an update for Squirrelmail which my SuSE 10.0 box picked up automatically on 19/12/2006. This has broken Squirrelmail completely and you can't log in. This is the error message: Parse error: parse error, unexpected $ in /srv/www/htdocs/squirrelmail/src/webmail.php on line 175 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 1

[Bug 213406] New: USB 2.0 HD only works with "PCI to USB-2.0"-Card when removing ehci_hcd module
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=213406 Summary: USB 2.0 HD only works with "PCI to USB-2.0"-Card when removing ehci_hcd module Product: SUSE Linux 10.1 Version: Final Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: folkyvolk(a)gmx.de QAContact: qa(a)suse.de A Hardware-Problem. I have the HD plugged to the USB-2.0-PCI-Card-Port. First, what happens, when I do "rmmod ehci_hcd": /var/log/messages: Oct 18 18:49:22 trara kernel: usb 2-2: new full speed USB device using uhci_hcd and address 5 Oct 18 18:49:22 trara kernel: usb 2-2: new device found, idVendor=048d, idProduct=8903 Oct 18 18:49:22 trara kernel: usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 Oct 18 18:49:22 trara kernel: usb 2-2: Product: USB TO IDE Oct 18 18:49:22 trara kernel: usb 2-2: Manufacturer: ITE TECH. INC. Oct 18 18:49:22 trara kernel: usb 2-2: SerialNumber: 024911000391 Oct 18 18:49:22 trara kernel: usb 2-2: configuration #1 chosen from 1 choice Oct 18 18:49:22 trara kernel: scsi27 : SCSI emulation for USB Mass Storage devices Oct 18 18:49:22 trara kernel: usb-storage: device found at 5 Oct 18 18:49:22 trara kernel: usb-storage: waiting for device to settle before scanning Oct 18 18:49:27 trara kernel: Vendor: Model: TOSHIBA MK4032GA Rev: AD10 Oct 18 18:49:27 trara kernel: Type: Direct-Access ANSI SCSI revision: 00 Oct 18 18:49:27 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:49:27 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:49:27 trara kernel: sda: assuming drive cache: write through Oct 18 18:49:27 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:49:27 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:49:27 trara kernel: sda: assuming drive cache: write through Oct 18 18:49:28 trara kernel: sda: sda1 Oct 18 18:49:28 trara kernel: sd 27:0:0:0: Attached scsi disk sda Oct 18 18:49:28 trara kernel: sd 27:0:0:0: Attached scsi generic sg0 type 0 Oct 18 18:49:28 trara kernel: usb-storage: device scan complete Then the HD is recognized and works fine (but only with usb-1.1 support) This is from /var/log/messages when doing "modprobe ehci_hcd" Oct 18 18:44:53 trara kernel: ehci_hcd 0000:00:0b.2: EHCI Host Controller Oct 18 18:44:53 trara kernel: ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 5 Oct 18 18:44:53 trara kernel: ehci_hcd 0000:00:0b.2: irq 11, io mem 0xcfffdf00 Oct 18 18:44:53 trara kernel: ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 Oct 18 18:44:53 trara kernel: usb usb5: new device found, idVendor=0000, idProduct=0000 Oct 18 18:44:53 trara kernel: usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 18 18:44:53 trara kernel: usb usb5: Product: EHCI Host Controller Oct 18 18:44:53 trara kernel: usb usb5: Manufacturer: Linux 2.6.16.21-0.25-default ehci_hcd Oct 18 18:44:53 trara kernel: usb usb5: SerialNumber: 0000:00:0b.2 Oct 18 18:44:53 trara kernel: usb usb5: configuration #1 chosen from 1 choice Oct 18 18:44:53 trara kernel: hub 5-0:1.0: USB hub found Oct 18 18:44:53 trara kernel: hub 5-0:1.0: 4 ports detected Oct 18 18:44:53 trara kernel: usb 5-4: new high speed USB device using ehci_hcd and address 2 Oct 18 18:44:55 trara kernel: usb 5-4: new device found, idVendor=048d, idProduct=8903 Oct 18 18:44:55 trara kernel: usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 Oct 18 18:44:55 trara kernel: usb 5-4: Product: USB TO IDE Oct 18 18:44:55 trara kernel: usb 5-4: Manufacturer: ITE TECH. INC. Oct 18 18:44:55 trara kernel: usb 5-4: SerialNumber: 024911000391 Oct 18 18:44:55 trara kernel: usb 5-4: configuration #1 chosen from 1 choice Oct 18 18:44:55 trara kernel: scsi21 : SCSI emulation for USB Mass Storage devices Oct 18 18:44:55 trara kernel: usb 2-2: USB disconnect, address 3 Oct 18 18:44:55 trara kernel: usb-storage: device found at 2 Oct 18 18:44:55 trara kernel: usb-storage: waiting for device to settle before scanning Oct 18 18:45:00 trara kernel: Vendor: Model: TOSHIBA MK4032GA Rev: AD10 Oct 18 18:45:00 trara kernel: Type: Direct-Access ANSI SCSI revision: 00 Oct 18 18:45:00 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:45:00 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:45:00 trara kernel: sda: assuming drive cache: write through Oct 18 18:45:00 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:45:00 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:45:00 trara kernel: sda: assuming drive cache: write through Oct 18 18:45:01 trara kernel: sda:<6>usb 5-4: USB disconnect, address 2 Oct 18 18:45:01 trara kernel: sd 21:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:01 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:01 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:01 trara kernel: sd 21:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:01 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:01 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:01 trara kernel: sd 21:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:01 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:01 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:01 trara kernel: unable to read partition table Oct 18 18:45:01 trara kernel: sd 21:0:0:0: Attached scsi disk sda Oct 18 18:45:01 trara kernel: sd 21:0:0:0: Attached scsi generic sg0 type 0 Oct 18 18:45:01 trara kernel: usb-storage: device scan complete Oct 18 18:45:01 trara usb_id[21834]: usb_id: unable to access '/block/sda' Oct 18 18:45:01 trara scsi_id[21835]: scsi_id: unable to access '/block/sda' Oct 18 18:45:01 trara scsi_id[21836]: scsi_id: unable to access '/block/sda' Oct 18 18:45:01 trara kernel: usb 5-4: new high speed USB device using ehci_hcd and address 3 Oct 18 18:45:02 trara kernel: usb 5-4: new device found, idVendor=048d, idProduct=8903 Oct 18 18:45:02 trara kernel: usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 Oct 18 18:45:02 trara kernel: usb 5-4: Product: USB TO IDE Oct 18 18:45:02 trara kernel: usb 5-4: Manufacturer: ITE TECH. INC. Oct 18 18:45:02 trara kernel: usb 5-4: configuration #1 chosen from 1 choice Oct 18 18:45:02 trara kernel: usb 5-4: can't set config #1, error -71 Oct 18 18:45:02 trara kernel: usb 5-4: USB disconnect, address 3 Oct 18 18:45:02 trara kernel: usb 5-4: new high speed USB device using ehci_hcd and address 5 Oct 18 18:45:04 trara kernel: usb 5-4: new device found, idVendor=048d, idProduct=8903 Oct 18 18:45:04 trara kernel: usb 5-4: new device strings: Mfr=1, Product=2, SerialNumber=3 Oct 18 18:45:04 trara kernel: usb 5-4: Product: USB TO IDE Oct 18 18:45:04 trara kernel: usb 5-4: Manufacturer: ITE TECH. INC. Oct 18 18:45:04 trara kernel: usb 5-4: SerialNumber: 054911000391 Oct 18 18:45:04 trara kernel: usb 5-4: configuration #1 chosen from 1 choice Oct 18 18:45:04 trara kernel: scsi22 : SCSI emulation for USB Mass Storage devices Oct 18 18:45:04 trara kernel: usb-storage: device found at 5 Oct 18 18:45:04 trara kernel: usb-storage: waiting for device to settle before scanning Oct 18 18:45:09 trara kernel: Vendor: Model: TOSHIBA MK4032GA Rev: AD10 Oct 18 18:45:09 trara kernel: Type: Direct-Access ANSI SCSI revision: 00 Oct 18 18:45:09 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:45:09 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:45:09 trara kernel: sda: assuming drive cache: write through Oct 18 18:45:09 trara kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Oct 18 18:45:09 trara kernel: sda: test WP failed, assume Write Enabled Oct 18 18:45:09 trara kernel: sda: assuming drive cache: write through Oct 18 18:45:10 trara kernel: sda:<6>usb 5-4: USB disconnect, address 5 Oct 18 18:45:10 trara kernel: sd 22:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:10 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:10 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:10 trara kernel: sd 22:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:10 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:10 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:10 trara kernel: sd 22:0:0:0: SCSI error: return code = 0x10000 Oct 18 18:45:10 trara kernel: end_request: I/O error, dev sda, sector 0 Oct 18 18:45:10 trara kernel: Buffer I/O error on device sda, logical block 0 Oct 18 18:45:10 trara kernel: unable to read partition table Oct 18 18:45:10 trara kernel: sd 22:0:0:0: Attached scsi disk sda Oct 18 18:45:10 trara kernel: sd 22:0:0:0: Attached scsi generic sg0 type 0 Oct 18 18:45:10 trara kernel: usb-storage: device scan complete Oct 18 18:45:10 trara usb_id[21925]: usb_id: unable to access '/block/sda' Oct 18 18:45:10 trara scsi_id[21926]: scsi_id: unable to access '/block/sda' Oct 18 18:45:10 trara scsi_id[21927]: scsi_id: unable to access '/block/sda' Oct 18 18:45:10 trara kernel: usb 5-4: new high speed USB device using ehci_hcd and address 6 ..and on and on... Other devices, like an usb-stick, work with the USB-2.0-Slot (with full speed) The PCI-Card seems to have a VIA-Chipset (onprint: SD-U2VIA6202-4I). The USB-Harddisk from cnmemory, 2.5", 40GB. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 206388] New: cant add usb printer - no usb devices (/dev/usb/lp?) found. It seems that your usb bus is not properly configured.
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=206388 Summary: cant add usb printer - no usb devices (/dev/usb/lp?) found. It seems that your usb bus is not properly configured. Product: openSUSE 10.2 Version: Alpha 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: gdoig(a)pcug.org.au QAContact: jsmeix(a)novell.com Tried to add a printer after a suse 10.2 Alpha 4 kde install. No printer was plugged in during the install and it was done after the installation process was done. I was surprised when NO pop-up box was presented when I plugged the printer into the laptop, I thought it would find this new printer 'hp photoshop 7760', but no luck. Any clues on how to fix ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 12

[Bug 203631] powersaved has problems unloading usb_storage + unwanted beeps
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=203631 gregkh(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX ------- Comment #12 from gregkh(a)novell.com 2006-12-19 22:53 MST ------- ok, closing wontfix. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 200488] no longer able to burn using external usb cdrw or dvd-rw
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=200488 gregkh(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED ------- Comment #4 from gregkh(a)novell.com 2006-12-19 22:53 MST ------- This should be fixed in the 10.2 release. If not, please let us know and reopen the bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 200098] Trekstore USB hard disk isn't recognized after Kernel update
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=200098 gregkh(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED ------- Comment #8 from gregkh(a)novell.com 2006-12-19 22:52 MST ------- Should be fixed in the 10.2 release. If not, please reopen bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 195872] Cannot Install Product
by bugzilla_noreply＠novell.com 20 Dec '06

20 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=195872 gregkh(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED ------- Comment #10 from gregkh(a)novell.com 2006-12-19 22:50 MST ------- Should be fixed in sles10 now. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0