July 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 401901] New: mono-winforms should require libgdiplus0
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=401901 Summary: mono-winforms should require libgdiplus0 Product: openSUSE 11.0 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Mono AssignedTo: bnc-team-mono(a)forge.provo.novell.com ReportedBy: ajorgensen(a)novell.com QAContact: qa(a)suse.de Found By: --- System.Windows.Forms requires libgdiplus but the mono-winforms package does not require libgdiplus0 as it should. mono-winforms-1.9.1-6.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 375461] New: KDE Screensaver Re-Activates DPMS
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=375461 Summary: KDE Screensaver Re-Activates DPMS Product: openSUSE 10.3 Version: Final Platform: PC OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: mglenn(a)cco.state.oh.us QAContact: qa(a)suse.de Found By: Customer To duplicate: 1) Go to KPowersave | Scheme Settings. 2) Clear "Enable specific screensaver settings" 3) Set "Enable specific display power management" 4) Set "Disable display power management" 5) Hit OK. 6) Go to the KDE panel, select "Lock the session" (Screensaver will activate; theme appears to be unimportant) 7) Unlock Screensaver 8) Wait roughly 5-6 minutes 9) DPMS activates, shutting down the monitor. 10) Go back to KPowersave; clear, then once again set "Disable display power management"; hit OK 11) DPMS will no longer activate, until Screensaver once again runs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 388885] New: phpmyadmin block root access is password contain a &
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=388885 Summary: phpmyadmin block root access is password contain a & Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: brunofr(a)ioda.net QAContact: qa(a)suse.de Found By: Consulting Version phpMyAdmin-2.11.0-14.2 on openSUSE 10.3 Here root password for mysql contain some extra characters like !%& and so. Customer have spend a three hours before founding this bug. Extra characters work like a charm with other mysql tools (mysqladmin, mysql etc) During a short period we change the password for to ascii one and everything work like a charm. Should be changed quickly if it exist also in openSUSE 11.0 I've test the lastest phpmyadmin 2.11.6 (also for security update) and it works. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 406639] New: ImageableArea in ppd is wrong for US Letter size printers
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=406639 Summary: ImageableArea in ppd is wrong for US Letter size printers Product: openSUSE 11.0 Version: Final Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: markgray+to-suse(a)puck.nac.net QAContact: jsmeix(a)novell.com Found By: Beta-Customer For some reason the spec file used to build cups-drivers for 11.0 changes the ImageableArea for Letter size paper for all printers to the same standard size using a multiline perl "one-liner". The ImageableArea for letter size paper for my printer should be: *ImageableArea Letter/Letter: "18 14.40 594 777.60" But is instead: *ImageableArea Letter/US Letter: "18 36 594 756" I saved the ppd's from my 10.2 installation and I am using them instead (they work perfectly -- the 11.0 supplied ones clip off a significant amount of text.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 391585] New: Powersave Removal of Configuration Files (i.e., /etc/ powersave/sleep)
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=391585 Summary: Powersave Removal of Configuration Files (i.e., /etc/powersave/sleep) Product: openSUSE 11.0 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: delder(a)novacoast.com QAContact: qa(a)suse.de Found By: Beta-Customer In the latest versions of powersave several configuration files have been removed: ------------------------------------------------------------------- Tue Mar 27 13:35:05 CEST 2007 - hmacht(a)suse.de - wait for reply from HAL when setting CPUFreq policy with cmd line client - remove disk settings, provided by pm-utils - accpet CPUFreq conservative governor as dynamic scaling method - remove all suspend related code and scripts, provided by pm-utils - removed config_files: scheme_acoustic disk sleep - update documentation According to the docs these were merged somewhere: 1) Configuration configuration merged into one directory. powersave.conf (etc/) and common (/etc/sysconfig/powersave) have been merged into the files common, events, cpufreq, thermal, sleep and battery. Following config Variables have are new or have changed: New general variables: /etc/sysconfig/powersave/cpufreq: POWERSAVED_CPU_HYSTERESIS= POWERSAVED_CONSIDER_NICE= POWERSAVED_JUMP_CPU_FREQ_MAX_LIMIT= /etc/sysconfig/powersave/events: POWERSAVE_EVENT_DAEMON_SCHEME_CHANGE= POWERSAVE_EVENT_TEMPERATURE_CRITICAL= POWERSAVE_EVENT_TEMPERATURE_HOT= POWERSAVE_EVENT_TEMPERATURE_PASSIVE= POWERSAVE_EVENT_TEMPERATURE_ACTIVE= POWERSAVE_EVENT_TEMPERATURE_OK= /etc/sysconfig/powersave/thermal: POWERSAVE_ENABLE_THERMAL_MANAGEMENT= new variables for schemes in /etc/sysconfig/powersave/schemes_*: POWERSAVE_DISABLE_DISPLAY_SETTINGS= POWERSAVE_DISABLE_SCREEN_SAVER= POWERSAVE_DISABLE_DPMS= POWERSAVE_DPMS_STANDBY= POWERSAVE_DPMS_SUSPEND= POWERSAVE_DPMS_OFF= Because of confusing naming of sleep states those have been renamed: there was: suspend (ACPI S4, APM suspend) standby (ACPI S3, APM standby) now there is: suspend to disk (ACPI S4, APM suspend) suspend to ram (ACPI S3, APM suspend) standby (ACPI S1, APM standby) Therefore following variables changed in /etc/sysconfig/powersave/events and /etc/sysconfig/powersave/sleep: POWERSAVE_EVENT_GLOBAL_SUSPEND2DISK= POWERSAVE_EVENT_GLOBAL_SUSPEND2RAM= POWERSAVE_EVENT_GLOBAL_RESUME_SUSPEND2DISK= POWERSAVE_EVENT_GLOBAL_RESUME_SUSPEND2RAM= POWERSAVE_UNLOAD_MODULES_BEFORE_SUSPEND2DISK= POWERSAVE_UNLOAD_MODULES_BEFORE_SUSPEND2RAM= POWERSAVE_SUSPEND2DISK_RESTART_SERVICES= POWERSAVE_SUSPEND2RAM_RESTART_SERVICES= POWERSAVED_DISABLE_USER_SUSPEND2DISK= POWERSAVED_DISABLE_USER_SUSPEND2RAM= POWERSAVE_SUSPEND2DISK_DELAY= POWERSAVE_SUSPEND2RAM_DELAY= POWERSAVE_STANDBY_DELAY= I haven't been able to find where to set some of these options though (in particular POWERSAVE_UNLOAD_MODULES* and POWERSAVE_SUSPEND2(RAM,DISK}_RESTART_SERVICES). These were very useful for unloading modules that would prevent a successful suspend or restarting services that need to be taken care of. Is there a better place where these options should be configured now? I'm looking at things like removing virtualbox modules and restarting vpn services. If I've missed this in the docs somewhere I apologize in advance. Thank you, Dan Elder -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 396200] New: kernel freeze
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=396200 Summary: kernel freeze Product: openSUSE 11.0 Version: RC 1 Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kdmoeller(a)alice-dsl.net QAContact: qa(a)suse.de Found By: Beta-Customer After working some minutes in KDE-3.5.9 I always get a kernel freeze. This only occurs with kernel-2.6.25.4-8-pae and kernel-2.6.25.4-8-default never with kernel-2.6.25.4-8-vanilla. I've a nvidia-card in my system, the freeze occurs with both drivers, nvidia and nv. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 406315] New: After kernel upgrade from 2.6.22-17.01 to 2.6.22-18. 02 sound broken
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=406315 Summary: After kernel upgrade from 2.6.22-17.01 to 2.6.22-18.02 sound broken Product: openSUSE 10.3 Version: Final Platform: 32bit OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jcarricksmith(a)gmail.com QAContact: kernel-maintainers(a)forge.provo.novell.com Found By: Customer The computer is a Dell Inspiron 6400 with a 82801G (ICH7 Family) chip which worked with the earlier kernel using the snd_hda_intel driver. I also had the Linuxant HSFmodem driver installed at the time of the upgrade. I have deleted the HSFmodel driver and replaced it with the one for the new kernel with no effect. If I enter modprobe snd-hda-intel the response is:- FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.22.18-0.2-default/weak-updates/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg) The entries in dmesg are:- snd_hda_intel: Unknown symbol snd_hda_bus_new snd_hda_intel: Unknown symbol snd_hda_build_pcms snd_hda_intel: Unknown symbol snd_hda_codec_new snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event snd_hda_intel: Unknown symbol snd_hda_calc_stream_format snd_hda_intel: Unknown symbol snd_hda_suspend snd_hda_intel: Unknown symbol snd_hda_codec_remove_notify_all snd_hda_intel: Unknown symbol snd_hda_resume snd_hda_intel: Unknown symbol snd_hda_build_controls (full output attached in dmesg.log) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 404460] New: add obs:/ location specifiers for repositories and kiwi configurations.
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=404460 Summary: add obs:/ location specifiers for repositories and kiwi configurations. Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: System Imaging AssignedTo: ms(a)novell.com ReportedBy: adrian(a)novell.com QAContact: adrian(a)novell.com Found By: --- We need the following support in kiwi to be able to support derived image configurations from one project into another one: <preferences> <type boot="obs:$dir1/$dir2"> should search in $somerootdir/images/$dir1/$dir2 and avoid /usr/share/kiwi directory. $somerootdir needs to be specified via kiwi command line. In addition to that we need to support also multiple repositories below a certain directory. It could look similar: <source path="obs://$dir1/$dir2> kiwi should look in $somerootdir/repos/$dir1/$dir2 in that case. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 403193] New: cpufreqency scaling - wrong frequency detected
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=403193 User SchwartzkopffD(a)Alte-Leipziger.de added comment https://bugzilla.novell.com/show_bug.cgi?id=403193#c1 Summary: cpufreqency scaling - wrong frequency detected Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: SchwartzkopffD(a)Alte-Leipziger.de QAContact: qa(a)suse.de Found By: --- p4_clockmod/speedstep_lib detects wrong frequency of CPU (multiplied by 8): # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Pentium(R) 4 CPU 1.80GHz stepping : 2 cpu MHz : 3650.000 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts bogomips : 3591.92 clflush size : 64 # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 3650000 5475000 7300000 9125000 10950000 12775000 14600000 # cpufreq-info cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006 Bitte melden Sie Fehler an http://bugs.opensuse.org. analysiere CPU 0: Treiber: p4-clockmod Folgende CPUs können nur gleichzeitig ihre Frequenz variieren: 0 Hardwarebedingte Grenzen der Taktfrequenz: 3.65 GHz - 14.60 GHz mögliche Taktfrequenzen: 3.65 GHz, 5.48 GHz, 7.30 GHz, 9.13 GHz, 10.95 GHz, 12.78 GHz, 14.60 GHz mögliche Regler: conservative, userspace, powersave, ondemand, performance momentane Taktik: die Frequenz soll innerhalb 3.65 GHz und 14.60 GHz. liegen. Der Regler "ondemand" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet wird. momentane Taktfrequenz ist 5.48 GHz (verifiziert durch Nachfrage bei der Hardware). # uname -a Linux a020146 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 i686 i386 GNU/Linux -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 388438] New: powersaved segfaults
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=388438 Summary: powersaved segfaults Product: openSUSE 11.0 Version: Factory Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)yahoo.com QAContact: qa(a)suse.de Found By: Beta-Customer After clean network install & update from factory /var/log/messages contains: cat /var/log/messages | grep powersaved May 6 08:34:44 linux klogd: powersaved[11090]: segfault at 1 ip b7e5c52b sp bfdf3cb8 error 4 in libdbus-1.so.3.4.0[b7e34000+36000] May 6 08:58:37 linux klogd: powersaved[4365]: segfault at 1 ip b7ded52b sp bfb86ce8 error 4 in libdbus-1.so.3.4.0[b7dc5000+36000] May 6 09:12:39 linux klogd: powersaved[4018]: segfault at 1 ip b7dc352b sp bfe5af58 error 4 in libdbus-1.so.3.4.0[b7d9b000+36000] May 6 10:15:41 linux klogd: powersaved[4374]: segfault at 1 ip b7e4e52b sp bfeee218 error 4 in libdbus-1.so.3.4.0[b7e26000+36000] May 6 18:31:36 linux klogd: powersaved[4303]: segfault at 1 ip b7e2a52b sp bfecac58 error 4 in libdbus-1.so.3.4.0[b7e02000+36000] May 6 19:00:41 linux klogd: powersaved[4010]: segfault at 1 ip b7f3b52b sp bfbda898 error 4 in libdbus-1.so.3.4.0[b7f13000+36000] May 6 22:42:50 linux klogd: powersaved[4264]: segfault at 1 ip b7db152b sp bfa514d8 error 4 in libdbus-1.so.3.4.0[b7d89000+36000] May 7 08:07:54 linux klogd: powersaved[4289]: segfault at 1 ip b7f2552b sp bf9c4cb8 error 4 in libdbus-1.so.3.4.0[b7efd000+36000] May 7 10:19:51 linux klogd: powersaved[4274]: segfault at 1 ip b7ec252b sp bfb61bc8 error 4 in libdbus-1.so.3.4.0[b7e9a000+36000] May 8 08:41:57 linux klogd: powersaved[4335]: segfault at 1 ip b7f4952b sp bfeeb2b8 error 4 in libdbus-1.so.3.4.0[b7f21000+36000] May 8 18:21:25 workstation6l klogd: powersaved[4054]: segfault at 1 ip b7dc952b sp bfe69858 error 4 in libdbus-1.so.3.4.0[b7da1000+36000] Notebook: Fujitsu Siemens Amilo Si 1520 Graphics: Fujitsu Siemens Mobile 945GM/GMS/GME, 943/940GML Express Monitor: QUANTADISPLAY LCD Monitor 1280x800@60Hz Wireless: Intel PRO/Wireless 3945ABG Network Connection Sound: 82801G (ICH7 Family) High Definition Audio Controller Desktop: gnome-desktop-2.22.1-14 YaST GUI: yast2-qt-2.16.45-2 OS: openSUSE 11.0 (i586) Beta2 VERSION = 11.0 Kernel: 2.6.25-26-pae -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13