July 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 398424] New: kerry spin at 100% cpu after querry
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=398424 Summary: kerry spin at 100% cpu after querry Product: openSUSE 11.0 Version: Factory Platform: 64bit OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: KDE3 AssignedTo: kde-maintainers(a)suse.de ReportedBy: pnemec(a)novell.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=220945) --> (https://bugzilla.novell.com/attachment.cgi?id=220945) screenshot of top and querry main window I am using KDE3, 11 updated to RC2 from RC1. I put query into kerry and it return correct result. After that I realise that it use one my CPU core constantly at 100%. Kerry did not stuck. I can put any other query, change size of window, or close and reopen window. See attached screenshot1 screenshot -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 392054] New: Kernel installs and /.buildenv
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=392054 Summary: Kernel installs and /.buildenv Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Live Medium AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: agruen(a)novell.com QAContact: coolo(a)novell.com CC: mmeeks(a)novell.com, coolo(a)novell.com Found By: --- (At least some) live CDs contain a file /.buildenv. Unfortunately in the kernel's %post script we are checking for the existence of that file before creating the initrd to avoid creating initrds as part of the build process (which would fail because of the missing boot loader setup there). So we need /.buildenv to be removed from the live CDs, please. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 399182] New: zypp fails to parse repodata created with createrepo and sqlite databases
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=399182 Summary: zypp fails to parse repodata created with createrepo and sqlite databases Product: openSUSE 10.3 Version: Final Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: dmacvicar(a)novell.com ReportedBy: rf(a)fietze-home.de QAContact: dmacvicar(a)novell.com Found By: Customer Creating the repository's repodata using createrepo <dir> works. Creating the repository's repodata using createrepo -d <dir> causes zypp(er)/YaST to fail with the following error when either refreshing or using the repository: Repository 'repname' is invalid. ResourceType parse: illegal string value 'other_db' Please, check if the URLs defined for this repository are pointing to a valid repository. Skipping repository 'repname' because of the above error. Versions used: createrepo-0.4.10-14 zypper-0.8.25-0.1 libzypp-3.26.8-0.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 398973] New: mismatch in cpu info shown between system monitor and ( gkrellm hwinfo)
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=398973 Summary: mismatch in cpu info shown between system monitor and (gkrellm hwinfo) Product: openSUSE 11.0 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: doiggl(a)velocitynet.com.au QAContact: qa(a)suse.de Found By: --- I found a mismatch in cpu info shown between system monitor and (gkrellm/hwinfo) cpu cores: 4 - OK It should show 2 cpu's used not 1. Attachments to follow. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 402725] New: Thinkpad T60: modem does not work
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=402725 Summary: Thinkpad T60: modem does not work Product: openSUSE 11.0 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: uli.2001(a)gmx.de QAContact: qa(a)suse.de Found By: --- The modem of my Thinkpad T60 does not work in openSUSE 11.0. It also did not work in 10.3, but I think it worked before that (I am not completely sure). It does work in Windows XP. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 402101] New: grub ignores device name and uses device id
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=402101 Summary: grub ignores device name and uses device id Product: openSUSE 11.0 Version: Final Platform: PC OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: condic(a)comcast.net QAContact: jsrain(a)novell.com Found By: Customer During a new installation, in expert mode, in fstab, I check: [X]device name When grub generates menu.lst is still uses device id instead. After the first reboot, the boot fails with GRUB on I created four partitions: sda1GB swap 9GB / 4GB /webpages 4GB /home By the way, because I like to use clonezilla to backup and restore my installation, I like to use exact sizes on my partitions. +M or +GB does not give enough information. It would be nice to see the starting and ending blocks or sectors, or Gib instead of G. I am going to reformat the disk and try again to see if I can describe this better. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 337778] New: aic94xx still can't see SATA drives
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=337778 Summary: aic94xx still can't see SATA drives Product: openSUSE 11.0 Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: harbaugh(a)ncifcrf.gov QAContact: qa(a)suse.de Found By: Beta-Customer the libsas with the 2.6.23 kernel was supposed to contain a fix to allow the aic94xx driver to work with SATA drives. However, during installation the module loads but still cannot access a sata drive. These are the kernel messages: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 16 (level, low) -> IRQ 16 aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:04:02.0 scsi0 : aic94xx aic94xx: BIOS present (1,1), 1822 aic94xx: ue num:1, ue size:88 aic94xx: manuf sect SAS_ADDR 500304800003bac0 aic94xx: manuf sect PCBA SN ORG aic94xx: ms: num_phy_desc: 8 aic94xx: ms: phy0: ENABLED aic94xx: ms: phy1: ENABLED aic94xx: ms: phy2: ENABLED aic94xx: ms: phy3: ENABLED aic94xx: ms: phy4: ENABLED aic94xx: ms: phy5: ENABLED aic94xx: ms: phy6: ENABLED aic94xx: ms: phy7: ENABLED aic94xx: ms: max_phys:0x8, num_phys:0x8 aic94xx: ms: enabled_phys:0xff aic94xx: ctrla: phy0: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy1: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy2: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy3: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy4: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy5: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy6: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy7: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: max_scbs:512, max_ddbs:128 aic94xx: setting phy0 addr to 500304800003bac0 aic94xx: setting phy1 addr to 500304800003bac0 aic94xx: setting phy2 addr to 500304800003bac0 aic94xx: setting phy3 addr to 500304800003bac0 aic94xx: setting phy4 addr to 500304800003bac0 aic94xx: setting phy5 addr to 500304800003bac0 aic94xx: setting phy6 addr to 500304800003bac0 aic94xx: setting phy7 addr to 500304800003bac0 aic94xx: num_edbs:21 aic94xx: num_escbs:3 aic94xx: Found sequencer Firmware version 1.1 (V28) aic94xx: downloading CSEQ... aic94xx: dma-ing 8192 bytes aic94xx: verified 8192 bytes, passed aic94xx: downloading LSEQs... aic94xx: dma-ing 14336 bytes aic94xx: LSEQ0 verified 14336 bytes, passed aic94xx: LSEQ1 verified 14336 bytes, passed aic94xx: LSEQ2 verified 14336 bytes, passed aic94xx: LSEQ3 verified 14336 bytes, passed aic94xx: LSEQ4 verified 14336 bytes, passed aic94xx: LSEQ5 verified 14336 bytes, passed aic94xx: LSEQ6 verified 14336 bytes, passed aic94xx: LSEQ7 verified 14336 bytes, passed aic94xx: max_scbs:446 aic94xx: first_scb_site_no:0x20 aic94xx: last_scb_site_no:0x1fe aic94xx: First SCB dma_handle: 0x2265d3000 aic94xx: device 0000:04:02.0: SAS addr 500304800003bac0, PCBA SN ORG, 8 phys, 8 enabled phys, flash present, BIOS build 1822 aic94xx: posting 3 escbs aic94xx: escbs posted aic94xx: posting 8 control phy scbs aic94xx: control_phy_tasklet_complete: phy0, lrate:0x8, proto:0xe aic94xx: control_phy_tasklet_complete: phy1: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy2: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy3: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy4: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy5: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy6: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy7: no device present: oob_status:0x0 aic94xx: escb_tasklet_complete: phy0: BYTES_DMAED aic94xx: STP proto device-to-host FIS: aic94xx: 00: 34 00 50 01 aic94xx: 04: 01 00 00 a0 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 01 00 00 00 aic94xx: 10: 00 00 00 00 aic94xx: asd_form_port: updating phy_mask 0x1 for phy0 sas: phy0 added to port0, phy_mask:0x1 sas: DOING DISCOVERY on port 0, pid:1465 sas: unhandled device 5 sas: DONE DISCOVERY on port 0, pid:1465, result:-6 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 404206] New: winbind is not installed when setting Windows Domain authorization in YaST
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=404206 Summary: winbind is not installed when setting Windows Domain authorization in YaST Product: openSUSE 11.0 Version: Final Platform: 64bit OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Samba AssignedTo: samba-maintainers(a)SuSE.de ReportedBy: ihudak(a)usoftinc.com QAContact: samba-maintainers(a)SuSE.de Found By: Customer 1. I had OpenSuSE 11.0 without samba installed. But installed yast-samba packages 2. Went to YaST->Network Services->Windows Domain Membership and started setting up Domain authorization. - YaST prompted to install samba and samba-client packages but didn't prompt to install winbind. 3. After the configuration is complete I could not login to my machine because winbind.so module was required by pam.d but was not installed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 406722] New: Slide Show
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=406722 Summary: Slide Show Product: openSUSE 11.0 Version: Final Platform: Other OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Translations AssignedTo: ke(a)novell.com ReportedBy: piotr.krakowiak(a)suse.pl QAContact: ke(a)novell.com Found By: --- Slide Show instead of in Polish is displayed in English. The file is translated slideshow.pl.po. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 326310] New: All yast software modules hang, if one of the downloaded repo-files is corrupted
by bugzilla_noreply＠novell.com 07 Jul '08

07 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=326310 Summary: All yast software modules hang, if one of the downloaded repo-files is corrupted Product: openSUSE 10.2 Version: Final Platform: All OS/Version: openSUSE 10.2 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: f.ellenberger(a)gmx.net QAContact: jsrain(a)novell.com Found By: --- When registering new sources, something went wrong. It seems to me, one of the files in /var/lib/zypp/cache/Source.blabla was incomplete. After that, all yast software modules hangs, when reading the cached files. It is only possible, to abort the program. Most critical: you cannot unselect sources. After deleting /var/lib/zypp/db/sources/blabla and /var/lib/zypp/cache/Source.blabla by hand, everything again works fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4