[Bug 337778] New: aic94xx still can't see SATA drives
https://bugzilla.novell.com/show_bug.cgi?id=337778 Summary: aic94xx still can't see SATA drives Product: openSUSE 11.0 Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: harbaugh@ncifcrf.gov QAContact: qa@suse.de Found By: Beta-Customer the libsas with the 2.6.23 kernel was supposed to contain a fix to allow the aic94xx driver to work with SATA drives. However, during installation the module loads but still cannot access a sata drive. These are the kernel messages: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 16 (level, low) -> IRQ 16 aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:04:02.0 scsi0 : aic94xx aic94xx: BIOS present (1,1), 1822 aic94xx: ue num:1, ue size:88 aic94xx: manuf sect SAS_ADDR 500304800003bac0 aic94xx: manuf sect PCBA SN ORG aic94xx: ms: num_phy_desc: 8 aic94xx: ms: phy0: ENABLED aic94xx: ms: phy1: ENABLED aic94xx: ms: phy2: ENABLED aic94xx: ms: phy3: ENABLED aic94xx: ms: phy4: ENABLED aic94xx: ms: phy5: ENABLED aic94xx: ms: phy6: ENABLED aic94xx: ms: phy7: ENABLED aic94xx: ms: max_phys:0x8, num_phys:0x8 aic94xx: ms: enabled_phys:0xff aic94xx: ctrla: phy0: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy1: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy2: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy3: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy4: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy5: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy6: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy7: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: max_scbs:512, max_ddbs:128 aic94xx: setting phy0 addr to 500304800003bac0 aic94xx: setting phy1 addr to 500304800003bac0 aic94xx: setting phy2 addr to 500304800003bac0 aic94xx: setting phy3 addr to 500304800003bac0 aic94xx: setting phy4 addr to 500304800003bac0 aic94xx: setting phy5 addr to 500304800003bac0 aic94xx: setting phy6 addr to 500304800003bac0 aic94xx: setting phy7 addr to 500304800003bac0 aic94xx: num_edbs:21 aic94xx: num_escbs:3 aic94xx: Found sequencer Firmware version 1.1 (V28) aic94xx: downloading CSEQ... aic94xx: dma-ing 8192 bytes aic94xx: verified 8192 bytes, passed aic94xx: downloading LSEQs... aic94xx: dma-ing 14336 bytes aic94xx: LSEQ0 verified 14336 bytes, passed aic94xx: LSEQ1 verified 14336 bytes, passed aic94xx: LSEQ2 verified 14336 bytes, passed aic94xx: LSEQ3 verified 14336 bytes, passed aic94xx: LSEQ4 verified 14336 bytes, passed aic94xx: LSEQ5 verified 14336 bytes, passed aic94xx: LSEQ6 verified 14336 bytes, passed aic94xx: LSEQ7 verified 14336 bytes, passed aic94xx: max_scbs:446 aic94xx: first_scb_site_no:0x20 aic94xx: last_scb_site_no:0x1fe aic94xx: First SCB dma_handle: 0x2265d3000 aic94xx: device 0000:04:02.0: SAS addr 500304800003bac0, PCBA SN ORG, 8 phys, 8 enabled phys, flash present, BIOS build 1822 aic94xx: posting 3 escbs aic94xx: escbs posted aic94xx: posting 8 control phy scbs aic94xx: control_phy_tasklet_complete: phy0, lrate:0x8, proto:0xe aic94xx: control_phy_tasklet_complete: phy1: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy2: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy3: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy4: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy5: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy6: no device present: oob_status:0x0 aic94xx: control_phy_tasklet_complete: phy7: no device present: oob_status:0x0 aic94xx: escb_tasklet_complete: phy0: BYTES_DMAED aic94xx: STP proto device-to-host FIS: aic94xx: 00: 34 00 50 01 aic94xx: 04: 01 00 00 a0 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 01 00 00 00 aic94xx: 10: 00 00 00 00 aic94xx: asd_form_port: updating phy_mask 0x1 for phy0 sas: phy0 added to port0, phy_mask:0x1 sas: DOING DISCOVERY on port 0, pid:1465 sas: unhandled device 5 sas: DONE DISCOVERY on port 0, pid:1465, result:-6 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=337778#c1
--- Comment #1 from Toni Harbaugh-Blackford
https://bugzilla.novell.com/show_bug.cgi?id=337778
Tejun Heo
https://bugzilla.novell.com/show_bug.cgi?id=337778#c2
Tejun Heo
https://bugzilla.novell.com/show_bug.cgi?id=337778
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=337778#c3
Stephan Kulow
https://bugzilla.novell.com/show_bug.cgi?id=337778
Lars Marowsky-Bree
participants (1)
-
bugzilla_noreply@novell.com