openSUSE Bugs November 2006

bugs@lists.opensuse.org

1 participants
4345 discussions

[Bug 222479] New: Evolution never saves password for IMAP and SMTP
by bugzilla_noreply＠novell.com 17 Sep '08

17 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=222479 Summary: Evolution never saves password for IMAP and SMTP Product: openSUSE 10.2 Version: Beta 2 plus Platform: x86-64 OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: Evolution AssignedTo: kharish(a)novell.com ReportedBy: thiago.vinhas(a)gmail.com QAContact: anagappan(a)novell.com Hi, The bug #216039, that was recently closed, still persists on my openSUSE 10.2 Beta2+ install... yesterday, I've upgraded all my system from Factory, using smart and the repo avaiable there. Even with a new home directory, Evolution still does not save the password for my IMAP and my SMTP-Auth server. Everytime I send a message, Evolution asks the password for SMTP. Everytime I close, and restart Evolution, it asks the IMAP server password. Regards, Thiago -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 104

[Bug 213362] New: Printing From Java Applications Fails With "No print service found."
by bugzilla_noreply＠novell.com 17 Sep '08

17 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=213362 Summary: Printing From Java Applications Fails With "No print service found." Product: openSUSE 10.2 Version: Alpha 5 plus Platform: x86 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Java AssignedTo: dbornkessel(a)novell.com ReportedBy: rschulz(a)sonic.net QAContact: qa(a)suse.de I am unable to print from Java applications. Both jEdit 4.3pre7 (a programmer's editor -- <http://jedit.org/>) and <oXygen/> 7.2 (an XML editor -- <http://www.oxygenxml.com/>) report "No print service found." when printing is attempted (this is true for both the "Page Setup" and "Print" commands). (Eclipse does not enable its Print command. It's unknown whether this is related.) The symptom appears to be 100% reproducible. There is no perceptible delay in receiving this response. I have configured a remote CUPS printer and can successfully print to that printer from other applications. To reproduce: Launch a Java application that supports printing. Issue its "Page Setup" command (if any) or its "Print" command. The "No print service found." alert should appear immediately. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 22

[Bug 216857] New: Synaptic touchpad looses bytes
by bugzilla_noreply＠novell.com 11 Sep '08

11 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=216857 Summary: Synaptic touchpad looses bytes Product: openSUSE 10.2 Version: Beta 1 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: clarkt(a)cnsp.com QAContact: qa(a)suse.de Fresh install of OpenSuSE 10.2 Beta 1. HP dv5224 laptop AMD Turion. When trying to use the synaptic touchpad, mouse will stop and jump around the screen. Dmesg reports lost bytes and having to resync the driver. This make using the touch pad difficult to use, especially when on the road and no access to external mouse. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 210881] New: switch to microsoft multimedia keyboard layout by default
by bugzilla_noreply＠novell.com 10 Sep '08

10 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=210881 Summary: switch to microsoft multimedia keyboard layout by default Product: openSUSE 10.2 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: SaX2 AssignedTo: ms(a)novell.com ReportedBy: dmueller(a)novell.com QAContact: qa(a)suse.de Hi, in order to properly (without xmodmap hacks) support laptop keys by default, sax2 has to configure the keyboard map to the microsoft multimedia layout. It would be nice if it would do that by default in all cases that make sense (e.g. even non-laptop installations with keyboards that could possibly be such a layout) to make multimedia/laptop keys work on as many machines as possible. the current xmodmap hack is the file in /usr/share/hotkey-setup/hotkey-setup.xmodmap I would like to get rid of that. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 35

[Bug 223722] New: Resume from suspend to disk fails after kernel upgrade
by bugzilla_noreply＠novell.com 09 Sep '08

09 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=223722 Summary: Resume from suspend to disk fails after kernel upgrade Product: openSUSE 10.2 Version: RC 1 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: james(a)usr-local-bin.org QAContact: qa(a)suse.de I upgraded to RC1 from the Factory tree. The new kernel image was added to the GRUB menu, at the bottom of list although it was set, correctly, to be the default. This is fine for a simple boot. However, when I then suspended the laptop and booted it back up, it booted the failsafe system. When I moved the new kernel image to the top of list (changing no other settings), rebooted and then suspended again, it resumed fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 30

[Bug 219392] New: uninitialized value in addition (+) at /usr/share/YaST2/modules/Bootloader_API.pm line 185
by bugzilla_noreply＠novell.com 09 Sep '08

09 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=219392 Summary: uninitialized value in addition (+) at /usr/share/YaST2/modules/Bootloader_API.pm line 185 Product: openSUSE 10.2 Version: Beta 2 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com CC: power-bugs(a)forge.provo.novell.com 10.2b2 whole disk install with lvm on mac.suse.de: Use of uninitialized value in addition (+) at /usr/share/YaST2/modules/Bootloader_API.pm line 185 (#1) (W uninitialized) An undefined value was used as if it were already defined. It was interpreted as a "" or a 0, but maybe it was a mistake. To suppress this warning assign a defined value to your variables. To help you figure out what was undefined, perl tells you what operation you used the undefined value in. Note, however, that perl optimizes your program and the operation displayed in the warning may not necessarily appear literally in your program. For example, "that $foo" is usually optimized into "that " . $foo, and the warning will refer to the concatenation (.) operator, even though there is no . in your program. the default= setting for lilo.conf did not work I set the linux section manually I added boot=/dev/sda2 manually in the config file editor. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 214884] New: nautilus-ifolder3 isn't installable
by bugzilla_noreply＠novell.com 08 Sep '08

08 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=214884 Summary: nautilus-ifolder3 isn't installable Product: openSUSE 10.2 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: jhargadon(a)novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de nautilus-ifolder3 is version 6228 but ifolder3 has buildnum 6146. Since nautilus-ifolder3 requires the same version, it cannot get installed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 17

[Bug 207161] New: build.opensuse.org web page: adding a build target twice results in sql error
by bugzilla_noreply＠novell.com 04 Sep '08

04 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=207161 Summary: build.opensuse.org web page: adding a build target twice results in sql error Product: openSUSE 10.2 Version: Alpha 4 plus Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aj(a)dungeon.inka.de QAContact: qa(a)suse.de explicit error handling might be nicer (or checking before adding a target). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 3

[Bug 214263] New: Improvement for LONGTMP - preserve certain (user's?) files
by bugzilla_noreply＠novell.com 03 Sep '08

03 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=214263 Summary: Improvement for LONGTMP - preserve certain (user's?) files Product: openSUSE 10.2 Version: Alpha 5 plus Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: one_way(a)online.de QAContact: qa(a)suse.de For the "normal" /tmp directory, YAST provides settings like TMP_DIRS_TO_CLEAR and OWNER_TO_KEEP_IN_TMP. For the LONGTMP-directory (presumably this could be /var/tmp), there is no such fine tuning possible, like e.g. "OWNER_TO_KEEP_IN_LONGTMP". However, this drawer is completely filled up on my computer, I cannot even summarily delete files as bash complains about a too long argument. Morever, there are some files in this drawer I don't want to be deleted, especially the KDE cache for my user ID (Favicons and so on). I would like to have some setting to selectively clean the LONGTMP, too. So that e.g. I could exempt my user name from a routine clean sweep. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 214950] New: Network manager applet crashes, when trying to login to Cisco VPN
by bugzilla_noreply＠novell.com 01 Sep '08

01 Sep '08

https://bugzilla.novell.com/show_bug.cgi?id=214950 Summary: Network manager applet crashes, when trying to login to Cisco VPN Product: openSUSE 10.2 Version: Alpha 5 Platform: i686 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME - Platform AssignedTo: bnc-team-gnome-platform(a)forge.provo.novell.com ReportedBy: anagappan(a)novell.com QAContact: qa(a)suse.de CC: rml(a)novell.com Configured a VPN connection setup in network manager. Steps to reproduce: 1. Configure a Cisco VPN connection in network manager 2. Try logging in with Actual result: Network manager crashes Additional info: from /var/log/NetworkManager Oct 20 12:25:42 nags NetworkManager: <information> VPN service 'org.freedesktop.NetworkManager.vpnc' signaled state change 6 -> 3. Oct 20 12:25:42 nags NetworkManager: <WARNING> nm_vpn_service_process_signal (): VPN failed for service 'org.freedesktop.NetworkManager.vpnc', signal 'Lau nchFailed', with message 'The VPN login failed because the VPN program could not be started.'. Oct 20 12:25:42 nags NetworkManager: <information> VPN service 'org.freedesktop.NetworkManager.vpnc' signaled state change 3 -> 6. Oct 20 12:25:42 nags NetworkManager: <WARNING> nm_vpn_service_stop_connection (): (VPN Service org.freedesktop.NetworkManager.vpnc): could not stop connec tion 'Corporate Network' because service was 6. Oct 20 12:25:42 nags NetworkManager: file nm-vpn-service.c: line 459 (nm_vpn_service_stage3_connect_cb): assertion failed: (service != NULL) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 20

← Newer
1
...
4
5
6
7
8
9
10
...
435
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

openSUSE Bugs November 2006