March 2012 - YaST Commits - openSUSE Mailing Lists

[yast-commit] r67789 - in /trunk/nfs-server: package/yast2-nfs-server.changes src/NfsServer.ycp src/nfs_server.ycp src/routines.ycp src/ui.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:28:57 2012 New Revision: 67789 URL: http://svn.opensuse.org/viewcvs/yast?rev=67789&view=rev Log: - merged proofread texts Modified: trunk/nfs-server/package/yast2-nfs-server.changes trunk/nfs-server/src/NfsServer.ycp trunk/nfs-server/src/nfs_server.ycp trunk/nfs-server/src/routines.ycp trunk/nfs-server/src/ui.ycp Modified: trunk/nfs-server/package/yast2-nfs-server.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-server/package/yast2-nfs-ser… ============================================================================== --- trunk/nfs-server/package/yast2-nfs-server.changes (original) +++ trunk/nfs-server/package/yast2-nfs-server.changes Thu Mar 29 15:28:57 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:28:39 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Fri Mar 16 08:49:43 UTC 2012 - mfilka(a)suse.com - Fixed testsuites Modified: trunk/nfs-server/src/NfsServer.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-server/src/NfsServer.ycp?rev… ============================================================================== --- trunk/nfs-server/src/NfsServer.ycp (original) +++ trunk/nfs-server/src/NfsServer.ycp Thu Mar 29 15:28:57 2012 @@ -345,7 +345,7 @@ { if (! Service::Start("idmapd")) { - Report::Error(_("Unable to start idmapd. Please check your domain setting.")); + Report::Error(_("Unable to start idmapd. Check your domain setting.")); ok = false; } } @@ -353,7 +353,7 @@ { if (! Service::Restart("idmapd")) { - Report::Error(_("Unable to restart idmapd")); + Report::Error(_("Unable to restart idmapd.")); ok = false; } } @@ -364,7 +364,7 @@ { if(!Service::Stop("idmapd")) { - Report::Error(_("Unable to stop idmapd")); + Report::Error(_("Unable to stop idmapd.")); ok = false; } } @@ -377,7 +377,7 @@ if (! Service::Start("svcgssd")) { // FIXME svcgssd is gone! (only nfsserver is left) - Report::Error(_("Unable to start svcgssd. Please ensure your kerberos and gssapi (nfs-utils) set up is correct.")); + Report::Error(_("Unable to start svcgssd. Ensure your kerberos and gssapi (nfs-utils) setup is correct.")); ok = false; } } Modified: trunk/nfs-server/src/nfs_server.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-server/src/nfs_server.ycp?re… ============================================================================== --- trunk/nfs-server/src/nfs_server.ycp (original) +++ trunk/nfs-server/src/nfs_server.ycp Thu Mar 29 15:28:57 2012 @@ -254,14 +254,14 @@ if (v4domain != "") { if (!NfsServer::enable_nfsv4) { - CommandLine::Print(_("Domain cannot be set without enabling NFSv4. Please use the 'set enablev4' command.")); + CommandLine::Print(_("Domain cannot be set without enabling NFSv4. Use the 'set enablev4' command.")); return false; } NfsServer::domain = v4domain; } if (nfs_sec == "" && enablev4 == "" && v4domain == "") { - CommandLine::Print(_("Command set must be used as in 'set option=value'. Please use 'set help' to get information about the options.")); + CommandLine::Print(_("Command 'set' must be used in the form 'set option=value'. Use 'set help' to get information about available options.")); return false; } @@ -300,7 +300,7 @@ ], "set" : $[ "handler" : NfsServerSetOptionHandler, - "help" : _("Set the parameters for domain, security and enablev4"), + "help" : _("Set the parameters for domain, security and enablev4."), ] ], "options" : $[ @@ -319,15 +319,15 @@ ], "domain" : $[ "type" : "string", - "help" : _("Domain specification for NFSv4 Idmapping, such as 'localdomain' or 'abc.com' etc."), + "help" : _("Domain specification for NFSv4 ID mapping, such as 'localdomain' or 'abc.com' etc."), ], "enablev4" : $[ "type" : "string", - "help" : _("Yes/No option for enabling/disabling support for NFSv4"), + "help" : _("Yes/No option for enabling/disabling support for NFSv4."), ], "security" : $[ "type" : "string", - "help" : _("Yes/No option for enabling/disabling secure NFS"), + "help" : _("Yes/No option for enabling/disabling secure NFS."), ] ], "mappings" : $[ Modified: trunk/nfs-server/src/routines.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-server/src/routines.ycp?rev=… ============================================================================== --- trunk/nfs-server/src/routines.ycp (original) +++ trunk/nfs-server/src/routines.ycp Thu Mar 29 15:28:57 2012 @@ -453,7 +453,8 @@ // %1 is a list of exported paths Report::Warning (sformat (_("There are unbalanced parentheses in export options for %1. -Probably there is spurious whitespace in the configuration file."), +Likely, there is a spurious whitespace in the configuration file. +"), bad_shares_s)); } } Modified: trunk/nfs-server/src/ui.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-server/src/ui.ycp?rev=67789&… ============================================================================== --- trunk/nfs-server/src/ui.ycp (original) +++ trunk/nfs-server/src/ui.ycp Thu Mar 29 15:28:57 2012 @@ -246,8 +246,9 @@ if (ret == `ok && !NfsServer::enable_nfsv4) { if (issubstring (opts,"fsid=0")) { - Popup::Message(_("'fsid=0'is not a valid option unless -NFSv4 is enabled (previous page)")); + Popup::Message(_("'fsid=0' is not a valid option unless +NFSv4 is enabled (previous page). +")); ret = nil; } } @@ -330,15 +331,15 @@ help_text = help_text + fw_cwm_widget["help"]:""; help_text = help_text + -_("If the server needs to handle NFSv4 clients, check Enable NFSv4, -and fill in the NFSv4 domain name you want the id mapping daemon to use. Leave +_("If the server needs to handle NFSv4 clients, check Enable NFSv4 +and fill in the NFSv4 domain name you want the ID mapping daemon to use. Leave it as localdomain or refer to the man page for idmapd and idmapd.conf if you are not sure. "); help_text = help_text + // FIXME: use %1 as nfs-utils.src.rpm produces nfs-kernel-server.rpm -_("If the server and client must authenticate using GSS library, please enable the Enable GSS Security -checkbox. For being able to use GSS API, currently you need to have Kerberos and gssapi (nfs-utils > 1.0.7) on your system +_("If the server and client must authenticate using GSS library, check the +Enable GSS Security box. To use GSS API, you currently need to have Kerberos and gssapi (nfs-utils > 1.0.7) on your system. "); /* The end of the definitions */ @@ -509,7 +510,7 @@ if (NfsServer::enable_nfsv4) { // Help, part 4 of 5, caution about fsid=0 in case NFSv4 is enabled. - help_text = help_text + _("The NFSv4 option is enabled in the previous page. Make sure that only one exported filesystem is marked with the fsid=0 option for a particular client."); + help_text = help_text + _("NFSv4 is enabled. Make sure that only one exported filesystem is marked with the fsid=0 option for a particular client."); // bnc#471874, NFS4 is complex and so is our UI :-/ // but let's fix the help at least -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67788 - in /trunk/nfs-client: package/yast2-nfs-client.changes src/nfs.ycp src/ui.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:28:25 2012 New Revision: 67788 URL: http://svn.opensuse.org/viewcvs/yast?rev=67788&view=rev Log: - merged proofread texts Modified: trunk/nfs-client/package/yast2-nfs-client.changes trunk/nfs-client/src/nfs.ycp trunk/nfs-client/src/ui.ycp Modified: trunk/nfs-client/package/yast2-nfs-client.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-client/package/yast2-nfs-cli… ============================================================================== --- trunk/nfs-client/package/yast2-nfs-client.changes (original) +++ trunk/nfs-client/package/yast2-nfs-client.changes Thu Mar 29 15:28:25 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:28:12 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Fri Feb 24 12:09:03 UTC 2012 - mfilka(a)suse.com - fixed testsuite Modified: trunk/nfs-client/src/nfs.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-client/src/nfs.ycp?rev=67788… ============================================================================== --- trunk/nfs-client/src/nfs.ycp (original) +++ trunk/nfs-client/src/nfs.ycp Thu Mar 29 15:28:25 2012 @@ -284,7 +284,7 @@ "type" : "string", // nfs or nfs4 // command line option help // fstab(5): fs_type - "help" : _("File system id, supported nfs and nfs4. Default value is nfs."), + "help" : _("File system ID, supported nfs and nfs4. Default value is nfs."), ], ], "mappings" : $[ Modified: trunk/nfs-client/src/ui.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/nfs-client/src/ui.ycp?rev=67788&… ============================================================================== --- trunk/nfs-client/src/ui.ycp (original) +++ trunk/nfs-client/src/ui.ycp Thu Mar 29 15:28:25 2012 @@ -502,15 +502,17 @@ about mounting NFS and mount options, refer to <tt>man nfs.</tt>") + // Help, part 3 of 3 -_("To mount a new NFS share, use Add button. To change the configuration of -currently mounted share, use Edit button. Remove and unmount selected share by -Delete button."); +_("To mount a new NFS share, click Add. To change the configuration of +a currently mounted share, click Edit. Remove and unmount a selected +share with Delete. +"); - string help_text2 = _("If you need to access NFSv4 shares (NFSv4 is a newer version -of NFS protocol), check Enable NFSv4 option. In that case, you might need to supply -specific NFSv4 Domain Name, required for correct setting of file/directory access -rights.") + fw_cwm_widget["help"]:""; + string help_text2 = _("If you need to access NFSv4 shares (NFSv4 is a newer version of the NFS +protocol), check the Enable NFSv4 option. In that case, you might need +to supply specific a NFSv4 Domain Name required for the correct setting +of file/directory access rights. +") + fw_cwm_widget["help"]:""; void EnableDisableButtons() { -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67787 - in /trunk/network: package/ src/clients/ src/installation/ src/lan/ src/modules/ src/provider/ src/routines/ src/services/
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:26:58 2012 New Revision: 67787 URL: http://svn.opensuse.org/viewcvs/yast?rev=67787&view=rev Log: - merged proofread texts Modified: trunk/network/package/yast2-network.changes trunk/network/src/clients/lan_auto.ycp trunk/network/src/clients/routing.ycp trunk/network/src/installation/inst_do_net_test.ycp trunk/network/src/lan/address.ycp trunk/network/src/lan/cmdline.ycp trunk/network/src/lan/complex.ycp trunk/network/src/lan/hardware.ycp trunk/network/src/lan/help.ycp trunk/network/src/modules/Lan.ycp trunk/network/src/provider/provider.ycp trunk/network/src/routines/routines.ycp trunk/network/src/services/proxy.ycp Modified: trunk/network/package/yast2-network.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/package/yast2-network.ch… ============================================================================== --- trunk/network/package/yast2-network.changes (original) +++ trunk/network/package/yast2-network.changes Thu Mar 29 15:26:58 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:26:35 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Wed Mar 14 12:00:35 CET 2012 - mvidner(a)suse.cz - No need to chmod /etc/sysconfig/network/providers after placing Modified: trunk/network/src/clients/lan_auto.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/clients/lan_auto.ycp… ============================================================================== --- trunk/network/src/clients/lan_auto.ycp (original) +++ trunk/network/src/clients/lan_auto.ycp Thu Mar 29 15:26:58 2012 @@ -356,7 +356,7 @@ if (Lan::isAnyInterfaceDown()){ integer timeout = LanItems::autoinstall_settings["strict_IP_check_timeout"]:0; y2debug("timeout %1", timeout); - string error_text = _("Configuration Error : uninitialized interface!"); + string error_text = _("Configuration Error: uninitialized interface."); if (timeout == 0) Popup::Error(error_text); else Popup::TimedError(error_text, timeout); } Modified: trunk/network/src/clients/routing.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/clients/routing.ycp?… ============================================================================== --- trunk/network/src/clients/routing.ycp (original) +++ trunk/network/src/clients/routing.ycp Thu Mar 29 15:26:58 2012 @@ -163,7 +163,7 @@ if (addedit == `add) { if ( destination == "" || gateway == "" ) { - CommandLine::Error( _("At least destination and gateway IP addresses must be specified")); + CommandLine::Error( _("At least destination and gateway IP addresses must be specified.")); return false; } @@ -180,7 +180,7 @@ else if ( addedit == `edit) { if ( destination == "") { - CommandLine::Error( _("Destination IP address must be specified")); + CommandLine::Error( _("Destination IP address must be specified.")); return false; } if ( size( options) < 2 ) { Modified: trunk/network/src/installation/inst_do_net_test.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/installation/inst_do… ============================================================================== --- trunk/network/src/installation/inst_do_net_test.ycp (original) +++ trunk/network/src/installation/inst_do_net_test.ycp Thu Mar 29 15:26:58 2012 @@ -649,11 +649,12 @@ //popup informing user about the failure to retrieve release notes //most likely due to server-side error ret = Popup::ContinueCancel(_("Download of latest release notes failed due to server-side error. -This does not necessarily mean misconfigured network. +This does not necessarily imply a faulty network configuration. Click 'Continue' to proceed to the next installation step. To skip any steps -requiring internet connection or to get back to your network configuration, -click 'Cancel'.")); +requiring an internet connection or to get back to your network configuration, +click 'Cancel'. +")); } // return code shows misconfigured network // return false Modified: trunk/network/src/lan/address.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/lan/address.ycp?rev=… ============================================================================== --- trunk/network/src/lan/address.ycp (original) +++ trunk/network/src/lan/address.ycp Thu Mar 29 15:26:58 2012 @@ -580,10 +580,12 @@ } else { // There'll be no 127.0.0.2 -> remind user to define some hostname if( !Host::NeedDummyIP() && - !Popup::YesNo( _("No hostname has been specified. It is recommended to associate -some hostname with static IP, otherwise the machine name will -not be resolvable without active network connection.\n -Really leave the hostname blank?")) ) { + !Popup::YesNo( _("No hostname has been specified. We recommend to associate +a hostname with a static IP, otherwise the machine name will +not be resolvable without an active network connection. + +Really leave the hostname blank? +")) ) { UI::SetFocus(`hostname); return false; } @@ -741,7 +743,7 @@ "custom_widget": `HBox( `ComboBox(`id(`vlan_eth), `opt(`notify), _("Real Interface for &VLAN"), []), - `IntField(`id(`vlan_id), `opt(`notify), _("VLAN id"), 0, 9999, 0) + `IntField(`id(`vlan_id), `opt(`notify), _("VLAN ID"), 0, 9999, 0) ), "opt": [`hstretch], "init": InitVLANSlave, @@ -768,7 +770,7 @@ /* ComboBox label */ "label": _("&Bond Driver Options"), "opt": [`hstretch, `editable], - "help": _("Select the bond driver options, and edit it if necessary. "), + "help": _("Select the bond driver options and edit them if necessary. "), "items" : [["mode=balance-rr miimon=100"], ["mode=active-backup miimon=100"], ["mode=balance-xor miimon=100"], ["mode=broadcast miimon=100"], ["mode=802.3ad miimon=100"], ["mode=balance-tlb miimon=100"], ["mode=balance-alb miimon=100"]] ], @@ -1004,7 +1006,7 @@ if ( fw_is_installed ) wd["FWZONE", "items"] = SuSEFirewall4Network::FirewallZonesComboBoxItems(); else - wd["FWZONE", "items"] = [ ["", _("Firewall is not installed") ] ]; + wd["FWZONE", "items"] = [ ["", _("Firewall is not installed.") ] ]; term label = `HBox ( Modified: trunk/network/src/lan/cmdline.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/lan/cmdline.ycp?rev=… ============================================================================== --- trunk/network/src/lan/cmdline.ycp (original) +++ trunk/network/src/lan/cmdline.ycp Thu Mar 29 15:26:58 2012 @@ -115,7 +115,7 @@ LanItems::bootproto = options["bootproto"]:"none"; if (!contains(["none", "static", "dhcp"], LanItems::bootproto)){ - Report::Error(_("Impossible value for bootproto!")); + Report::Error(_("Impossible value for bootproto.")); return false; } @@ -124,7 +124,7 @@ LanItems::netmask = options["netmask"]:"255.255.255.0"; LanItems::startmode = options["startmode"]:"auto"; if (!contains(["auto", "ifplugd", "nfsroot"], LanItems::startmode)){ - Report::Error(_("Impossible value for startmode!")); + Report::Error(_("Impossible value for startmode.")); return false; } @@ -157,12 +157,12 @@ LanItems::bootproto = options["bootproto"]:"none"; if (!contains(["none", "static", "dhcp"], LanItems::bootproto)){ - Report::Error(_("Impossible value for bootproto!")); + Report::Error(_("Impossible value for bootproto.")); return false; } if (LanItems::bootproto=="static"){ if (!(size(options["ip"]:"")>0)){ - Report::Error(_("For static configuration \"ip\" option is needed!")); + Report::Error(_("For static configuration, the \"ip\" option is needed.")); return false; } LanItems::ipaddr = options["ip"]:""; @@ -178,7 +178,7 @@ LanItems::startmode = options["startmode"]:"auto"; if (!contains(["auto", "ifplugd", "nfsroot"], LanItems::startmode)){ - Report::Error(_("Impossible value for startmode!")); + Report::Error(_("Impossible value for startmode.")); return false; } Modified: trunk/network/src/lan/complex.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/lan/complex.ycp?rev=… ============================================================================== --- trunk/network/src/lan/complex.ycp (original) +++ trunk/network/src/lan/complex.ycp Thu Mar 29 15:26:58 2012 @@ -112,8 +112,8 @@ if (fw != ""){ if ((!Package::Installed(fw) && !Package::Available(fw))){ Popup::Message(sformat(_("Firmware is needed. Install it from -Add-On CD. -First add the Add-On CD to your YaST software repositories then return +the add-on CD. +First add the add-on CD to your YaST software repositories then return to this configuration dialog. "))); return false; @@ -121,9 +121,12 @@ if (!contains(LanItems::Requires, fw)) LanItems::Requires = add(LanItems::Requires, fw); } else { - return (Popup::ContinueCancel(_("The device needs a firmware to function properly. It can be usually downloaded from your driver vendor web page.\nIf you have already downloaded and installed the firmware, click Continue -to configure the device. Otherwise click Cancel and return to this dialog -once you have installed the firmware."))); + return (Popup::ContinueCancel(_("The device needs a firmware to function properly. Usually, it can be +downloaded from your driver vendor's Web page. +If you have already downloaded and installed the firmware, click +Continue to configure the device. Otherwise click Cancel and +return to this dialog once you have installed the firmware. +"))); } } @@ -136,7 +139,7 @@ if(PackagesInstall(LanItems::Requires) != `next) return false; if (fw=="b43-fwcutter"){ - if(Popup::ContinueCancelHeadline(_("Installing firmware"), _("For successful firmware installation the, 'install_bcm43xx_firmware' script needs to be executed. Execute it now ?"))){ + if(Popup::ContinueCancelHeadline(_("Installing firmware"), _("For successful firmware installation, the 'install_bcm43xx_firmware' script needs to be executed. Execute it now?"))){ map<string, any> command = (map<string, any>)SCR::Execute(.target.bash_output, "/usr/sbin/install_bcm43xx_firmware"); if (command["exit"]:-1!=0) Popup::ErrorDetails(_("An error occurred during firmware installation."), command["stderr"]:""); Modified: trunk/network/src/lan/hardware.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/lan/hardware.ycp?rev… ============================================================================== --- trunk/network/src/lan/hardware.ycp (original) +++ trunk/network/src/lan/hardware.ycp Thu Mar 29 15:26:58 2012 @@ -32,9 +32,9 @@ /* Manual network card setup help 2/4 */ /* translators: do not translated udev, MAC, BusID*/ -_("Udev Rules are rules for the Kernel device manager that allow -associating MAC address or BusID of the network device with its name (for example, -eth1, wlan0 ) and assures a persistent device name upon reboot. +_("Udev Rules are rules for the kernel device manager that allow +associating the MAC address or BusID of the network device with its name (for +example, eth1, wlan0 ) and assures a persistent device name upon reboot. ") + _("Show visible port identification allows you to physically identify now configured NIC. @@ -48,13 +48,12 @@ ") + /* Manual networ card setup help 3/4 */ -_("Additionally, you may specify Options for the Kernel module. Use this format: option=value. Each entry should be space -separated,for example: io=0x300 irq=5. Note: If two cards are -configured with the same module name, options will be merged while saving. +_("Additionally, specify Options for the kernel module. Use this +format: option=value. Each entry should be space-separated, for example: io=0x300 irq=5. Note: If two cards are +configured with the same module name, the options will be merged while saving. ") + -_("If you write something into Ethtool options, ifup will call ethtool with this options. -"); +_("If you specify options via Ethtool options, ifup will call ethtool with these options.\n"); if(!(LanItems::operation == `edit || Arch::s390 ())) { @@ -483,7 +482,7 @@ // when dev_name changed, rename ifcfg (both in NetworkInterfaces and LanItems) if (new_name!=old_name){ if (contains(NetworkInterfaces::List(""), new_name)){ - Popup::Error(_("Configuration name already exists!")); + Popup::Error(_("Configuration name already exists.")); ret=nil; } else{ y2internal("LanItems::GetReplacedItemUdev2 %1", LanItems::GetReplacedItemUdev("NAME", new_name)); Modified: trunk/network/src/lan/help.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/lan/help.ycp?rev=677… ============================================================================== --- trunk/network/src/lan/help.ycp (original) +++ trunk/network/src/lan/help.ycp Thu Mar 29 15:26:58 2012 @@ -30,9 +30,9 @@ /* Network setup method help */ // NetworkManager and ifup are programs _("<big>Network Setup Method</big> -Use the NetworkManager to have a desktop applet +Use the NetworkManager as a desktop applet managing connections for all interfaces. It is well suited -for switching among wired and multiple wireless networks. +for switching among wired and wireless networks. ") + /* Network setup method help */ // NetworkManager and ifup are programs @@ -49,16 +49,16 @@ Press Add to configure a new network card manually. ") + _("<big>Configuring or Deleting:</big> Choose a network card to change or remove. -Then press Edit or Delete as desired. +Then press Edit or Delete respectively. "), "ipv6" : /* IPv6 help */ _("<big>IPv6 Protocol Settings</big> Check Enable IPv6 to enable the ipv6 module in the kernel. -It is possible to use IPv6 together with IPv4. This is a default option. -To disable IPv6, uncheck this option (this will blacklist the kernel -module for ipv6). If the IPv6 protocol is not used on your network, the response +It is possible to use IPv6 together with IPv4. This is the default option. +To disable IPv6, uncheck this option. This will blacklist the kernel +module for ipv6. If the IPv6 protocol is not used on your network, the response time can be faster. ") + @@ -74,17 +74,17 @@ ") + _("For each route, enter destination network IP address, gateway address, -and netmask. To omit any of these values, use dash sign \"-\". Select -the device through which the traffic to the defined network will be routed, -as well.\"-\" is an alias for any interface. +and netmask. To omit any of these values, use a dash sign \"-\". Select +the device through which the traffic to the defined network will be routed.\"-\" is an alias for any interface. ") + /* Routing dialog help 2/2 */ _("Enable IP Forwarding (forwarding packets from external networks to the internal one) if this system is a router. Both IPv4 and IPv6 connectivity will be affected by this setting. Important: if the firewall is enabled, allowing IP forwarding alone is not enough. -You should enable masquerade and/or set at least one redirect rule in firewall. You may -use YaST firewall module for that."), +You should enable masquerading and/or set at least one redirect rule in the +firewall configuration. Use the YaST firewall module. +"), "dhcp_hostname": _("If you are using DHCP to get an IP address, check whether you get @@ -95,10 +95,11 @@ "write_hostname": _("Assign Hostname to Loopback IP associates your hostname with -<tt>127.0.0.2</tt> (loopback) IP address in <tt>/etc/hosts</tt>. This is an +the IP address <tt>127.0.0.2</tt> (loopback) in <tt>/etc/hosts</tt>. This is a useful option if you want to have the hostname resolvable at all times, even -without active network. In all other cases, use it carefully, especially -if this computer provides some network services."), +without an active network. In all other cases, use it carefully, especially +if this computer provides some network services. +"), "searchlist_s": _("Enter the name servers and domain search list for resolving @@ -123,29 +124,33 @@ command."), "dns_config_policy" : -_("Select the way how DNS configuration (name servers, search list, the content of -/etc/resolv.conf file) will be modified. Normally, it is handled by netconfig -script which merges the data statically defined here with those obtained dynamically (e.g. from -DHCP client, NetworkManager etc.). This is the default, Use Default Policy option and -it is sufficient for most of the configurations.") + +_("Select the way how the DNS configuration will be modified (name servers, +search list, the content of /etc/resolv.conf). Normally, it is handled +by the netconfig script, which merges statically defined data with +dynamically obtained data (e.g. from the DHCP client, NetworkManager, +etc.). This is the default. Use Default Policy is sufficient for most +configurations. +") + -_("By choosing Only Manually option, netconfig will no longer be allowed to modify -/etc/resolv.conf. You can however edit the file manually. By choosing Use Custom Policy -option, you may specify a custom policy string, which consists of comma-separated list of interface -names, including wildcards, with STATIC and STATIC_FALLBACK as predefined special values. For more -information, see netconfig manual page. Note: leaving the field blank is the same as using -Only Manually policy."), +_("By choosing Only Manually, netconfig will no longer be +allowed to modify /etc/resolv.conf. You can however edit the file +manually. By choosing Use Custom Policy, you may specify a custom +policy string, which consists of a comma-separated list of interface names, +including wildcards, with STATIC and STATIC_FALLBACK as predefined special +values. For more information, see the netconfig manual page. Note: +Leaving the field blank is the same as using the Only Manually +policy. +"), "bootproto": /* Address dialog help 1-6/8: dynamic address preferred */ /* Address dialog help 1/8 */ _("<big>Address Setup</big> -Select No Address Setup if you do not want any IP address for this device. +Select No Address Setup if you do not want to assign an IP address to this device. This is particularly useful for bonding ethernet devices. ") + - _("Check iBFT if you want to keep network configured in your BIOS. -") + _("Check iBFT if you want to keep the network configured in your BIOS.\n") + /* Address dialog help 2/8 */ _("Select Dynamic Address if you do not have a static IP address @@ -153,9 +158,9 @@ ") + /* Address dialog help 3/8 */ - _("You can choose one of the dynamic address assignment methods. Select DHCP -if you have a DHCP server running on your local network. Network addresses are then -obtained automatically from the server. + _("Choose one of the dynamic address assignment methods. Select DHCP +if you have a DHCP server running on your local network. Network addresses +are then automatically obtained from the server. ") + /* Address dialog help 4/8 */ @@ -204,8 +209,8 @@ Maximum transfer unit (MTU) is the maximum size of the packet, transferred over the network in one frame. Usually, you do not need to set a MTU, but using lower MTU values may improve the network performance, -especially on slow dial-up connections. Either, select one of the recommended values, -or define another one. +especially on slow dial-up connections. Either select one of the recommended +values or define another one. "), "bondslave": @@ -224,13 +229,13 @@ /* DHCP dialog help 3/7 */ _("The Hostname to Send specifies a string used for the -hostname option field, when dhcpcd sends messages to the DHCP server. Some +hostname option field when dhcpcd sends messages to the DHCP server. Some DHCP servers update name server zones (forward and reverse records) according to this hostname (dynamic DNS). Some DHCP servers require the Hostname to Send option field to contain a specific string in the DHCP messages from clients. Leave AUTO to send the current hostname (for example, the one defined in <tt>/etc/HOSTNAME</tt>). -For not sending a hostname leave the field empty. +If you do not want to send a hostname, leave the field empty. "), "additional": @@ -258,11 +263,11 @@ "wep_key" : _("Choose between three Key Input Types for your key. Passphrase: The key is generated from the phrase entered. - ASCII: The ASCII values of the characters entered form the + ASCII: The ASCII values of the characters entered constitute the key. Enter 5 characters for 64-bit keys, up to 13 characters for 128-bit keys, up to 16 characters for 156-bit keys, and up to 29 characters for 256-bit keys. - Hexadecimal: Enter the hex codes of the key, directly. Enter + Hexadecimal: Enter the hex codes of the key directly. Enter 10 hex digits for 64-bit keys, 26 digits for 128-bit keys, 32 digits for 156-bit keys, and 58 digits for 256-bit keys. You can use hyphens <tt>-</tt> to separate pairs or groups of digits, for example, Modified: trunk/network/src/modules/Lan.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/modules/Lan.ycp?rev=… ============================================================================== --- trunk/network/src/modules/Lan.ycp (original) +++ trunk/network/src/modules/Lan.ycp Thu Mar 29 15:26:58 2012 @@ -232,19 +232,20 @@ if(Abort()) return false; /* Progress step 1/9 */ - if (gui) ProgressNextStage(_("Detecting for ndiswrapper...")); + if (gui) ProgressNextStage(_("Detecting ndiswrapper...")); // modprobe ndiswrapper before hwinfo when needed (#343893) if (!Mode::autoinst() && PackageSystem::Installed("ndiswrapper")){ y2milestone("ndiswrapper: installed"); if (size((list<string>)SCR::Read(.target.dir, "/etc/ndiswrapper"))>0){ y2milestone("ndiswrapper: configuration found"); if ((integer)SCR::Execute(.target.bash, "lsmod |grep -q ndiswrapper")!=0 - && Popup::YesNo(_("There is a ndiswrapper configuration detected, -but the Kernel module was not modprobed. + && Popup::YesNo(_("Detected a ndiswrapper configuration, +but the kernel module was not modprobed. Do you want to modprobe ndiswrapper? "))) { - if (ModuleLoading::Load("ndiswrapper", "", "", "", false, true)==`fail) Popup::Error(_("ndiswrapper kernel module wasn't loaded. -Check configuration manually.")); + if (ModuleLoading::Load("ndiswrapper", "", "", "", false, true)==`fail) Popup::Error(_("ndiswrapper kernel module has not been loaded. +Check configuration manually. +")); } } } @@ -339,7 +340,7 @@ global void SetIPv6(boolean status){ if(ipv6 != status) { ipv6=status; - Popup::Warning(_("To apply this change a reboot is needed.")); + Popup::Warning(_("To apply this change, a reboot is needed.")); LanItems::SetModified(); } } @@ -505,7 +506,7 @@ `VSpacing(0.5), // This is in information message. Next come the // hardware class name (network cards). - `HVCenter(`Label(_("Because of bridged network YaST2 needs to restart network to apply the settings."))), + `HVCenter(`Label(_("Because of the bridged network, YaST2 needs to restart the network to apply the settings."))), `VSpacing(0.5) ))), `ButtonBox ( Modified: trunk/network/src/provider/provider.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/provider/provider.yc… ============================================================================== --- trunk/network/src/provider/provider.ycp (original) +++ trunk/network/src/provider/provider.ycp Thu Mar 29 15:26:58 2012 @@ -505,7 +505,7 @@ } */ // NM doesn't ask for password (#225793) else if(ask_pass && NetworkService::IsManaged ()){ - Popup::Warning(_("NetworkManager does not have the ability to ask for the password. + Popup::Warning(_("NetworkManager cannot ask for the password. Use KInternet (without NetworkManager) or store passwords on the system. ")); continue; Modified: trunk/network/src/routines/routines.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/routines/routines.yc… ============================================================================== --- trunk/network/src/routines/routines.ycp (original) +++ trunk/network/src/routines/routines.ycp Thu Mar 29 15:26:58 2012 @@ -825,9 +825,11 @@ if (show_popup) { Popup::Warning( _("Network is currently controlled by NetworkManager and its settings -cannot be edited by YaST.\n -To edit the settings, use NetworkManager connection editor, or -switch the network setup method to Traditional method with ifup.")); +cannot be edited by YaST. + +To edit the settings, use the NetworkManager connection editor or +switch the network setup method to Traditional with ifup. +")); UI::FakeUserInput ($["ID": "global"]); } } else disable=false; Modified: trunk/network/src/services/proxy.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/network/src/services/proxy.ycp?r… ============================================================================== --- trunk/network/src/services/proxy.ycp (original) +++ trunk/network/src/services/proxy.ycp Thu Mar 29 15:26:58 2012 @@ -393,9 +393,10 @@ /* Proxy dialog help 5/8 */ - _("If you have the Use the Same Proxy for All Protocols option checked, it is + _("If you check Use the Same Proxy for All Protocols, it is enough to fill in the HTTP proxy URL. It will be used for all protocols -(HTTP, HTTPS and FTP).\n") + +(HTTP, HTTPS and FTP). +") + /* Proxy dialog help 6/8 */ @@ -408,7 +409,7 @@ /* Proxy dialog help 7/8 */ _("If you are using a proxy server with authorization, enter the Proxy User Name and Proxy Password. A valid username -consists of printable ASCII characters (except for quotation marks) only. +consists of printable ASCII characters only (except for quotation marks). ") + /* Proxy dialog help 8/8 */ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67786 - in /trunk/multipath/src: Multipath.ycp complex.ycp helps.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:25:07 2012 New Revision: 67786 URL: http://svn.opensuse.org/viewcvs/yast?rev=67786&view=rev Log: - merged proofread texts Modified: trunk/multipath/src/Multipath.ycp trunk/multipath/src/complex.ycp trunk/multipath/src/helps.ycp Modified: trunk/multipath/src/Multipath.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/multipath/src/Multipath.ycp?rev=… ============================================================================== --- trunk/multipath/src/Multipath.ycp (original) +++ trunk/multipath/src/Multipath.ycp Thu Mar 29 15:25:07 2012 @@ -107,31 +107,31 @@ ret = Read_MultipathConfig(); if(ret == false) { - Report::Error(_("Cannot read multipath section in multipath configuration")); + Report::Error(_("Cannot read multipath section in multipath configuration.")); return false; } ret = Read_DefaultsConfig(); if(ret == false) { - Report::Error(_("Cannot read defaults section in multipath configuration")); + Report::Error(_("Cannot read defaults section in multipath configuration.")); return false; } ret = Read_BlacklistConfig(); if(ret == false) { - Report::Error(_("Cannot read blacklist section in multipath configuration")); + Report::Error(_("Cannot read blacklist section in multipath configuration.")); return false; } ret = Read_BlacklistException_Config(); if(ret == false) { - Report::Error(_("Cannot read blacklist_exceptions section in multipath configuration")); + Report::Error(_("Cannot read blacklist_exceptions section in multipath configuration.")); return false; } ret = Read_DeviceConfig(); if(ret == false) { - Report::Error(_("Cannot read devices section in multipath configuration")); + Report::Error(_("Cannot read devices section in multipath configuration.")); return false; } return true; @@ -146,7 +146,7 @@ boolean ret = false; /* Multipath read dialog caption */ - string caption = _("Initializing multipath Configuration"); + string caption = _("Initializing Multipath Configuration"); integer steps = 4; @@ -180,7 +180,7 @@ if (Mode::normal() && Stage::normal()) { ret = PackageSystem::CheckAndInstallPackagesInteractive (required_pack_list); if (ret == false) { - Report::Error(_("Cannot install required packages")); + Report::Error(_("Cannot install required packages.")); return false; } } else { @@ -236,7 +236,7 @@ */ global boolean Write() { /* Multipath read dialog caption */ - string caption = _("Saving multipath Configuration"); + string caption = _("Saving Multipath Configuration"); integer steps = 2; @@ -280,7 +280,7 @@ if(service_status == 1) { if (Mode::normal() && Stage::normal()) { if( 0 != SCR::Execute(.target.bash, "/etc/init.d/multipathd restart")) { - Report::Error(_("Restart multipathd failed.")); + Report::Error(_("Restarting multipathd failed.")); return false; } } else { @@ -395,7 +395,7 @@ continue; } else if(ret == `start_multipath) { if (Modified() == true && - Popup::YesNo(_("Ignore your modification ?")) == false) + Popup::YesNo(_("Ignore your modification?")) == false) { Update_Service_Status(); continue; @@ -405,7 +405,7 @@ continue; } else if(ret == `stop_multipath) { if (Modified() == true && - Popup::YesNo(_("Ignore your modification ?")) == false) + Popup::YesNo(_("Ignore your modification?")) == false) { Update_Service_Status(); continue; Modified: trunk/multipath/src/complex.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/multipath/src/complex.ycp?rev=67… ============================================================================== --- trunk/multipath/src/complex.ycp (original) +++ trunk/multipath/src/complex.ycp Thu Mar 29 15:25:07 2012 @@ -2721,7 +2721,7 @@ boolean ret = Service::Enable("boot.multipath"); if (ret == false) { - prop_info = prop_info + _("* Can not enable boot.multipath") + "\n"; + prop_info = prop_info + _("* Cannot enable boot.multipath.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; @@ -2729,7 +2729,7 @@ ret = Service::Enable("multipathd"); if (ret == false) { - prop_info = prop_info + _("* Can not enable multipathd") + "\n"; + prop_info = prop_info + _("* Cannot enable multipathd.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; @@ -2739,7 +2739,7 @@ ret = Service::Start("multipathd"); if (ret == false) { - prop_info = prop_info + _("* Can not start multipathd") + "\n"; + prop_info = prop_info + _("* Cannot start multipathd.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; @@ -2764,7 +2764,7 @@ boolean ret = Service::Stop("multipathd"); if (ret == false) { - prop_info = prop_info + _("* Can not stop multipath") + "\n"; + prop_info = prop_info + _("* Cannot stop multipath.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; @@ -2774,7 +2774,7 @@ ret = Service::Disable("multipathd"); if (ret == false) { - prop_info = prop_info + _("* Can not disable multipathd") + "\n"; + prop_info = prop_info + _("* Cannot disable multipathd.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; @@ -2782,7 +2782,7 @@ ret = Service::Disable("boot.multipath"); if (ret == false) { - prop_info = prop_info + _("* Can not disable boot.multipath") + "\n"; + prop_info = prop_info + _("* Cannot disable boot.multipath.") + "\n"; Popup::Message(prop_info); Update_Service_Status(); return; Modified: trunk/multipath/src/helps.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/multipath/src/helps.ycp?rev=6778… ============================================================================== --- trunk/multipath/src/helps.ycp (original) +++ trunk/multipath/src/helps.ycp Thu Mar 29 15:25:07 2012 @@ -37,13 +37,13 @@ map HELPS = $[ /* Read dialog help 1/2 */ - "read" : _("<big>Initializing multipath Configuration</big> -Please wait... + "read" : _("<big>Initializing Multipath Configuration</big> + "), /* Write dialog help 1/2 */ - "write" : _("<big>Saving multipath Configuration</big> -Please wait... + "write" : _("<big>Saving Multipath Configuration</big> + "), /* dialog help for Status help */ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67785 - in /trunk/mail: package/yast2-mail.changes src/mail-server_helps.ycp src/mail.ycp src/ui.ycp src/widgets.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:24:22 2012 New Revision: 67785 URL: http://svn.opensuse.org/viewcvs/yast?rev=67785&view=rev Log: - merged proofread texts Modified: trunk/mail/package/yast2-mail.changes trunk/mail/src/mail-server_helps.ycp trunk/mail/src/mail.ycp trunk/mail/src/ui.ycp trunk/mail/src/widgets.ycp Modified: trunk/mail/package/yast2-mail.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/package/yast2-mail.changes?… ============================================================================== --- trunk/mail/package/yast2-mail.changes (original) +++ trunk/mail/package/yast2-mail.changes Thu Mar 29 15:24:22 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:24:06 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Wed Jan 25 14:42:40 UTC 2012 - varkoly(a)suse.com - bnc#743369 - yast2 mail module does not open the firewall Modified: trunk/mail/src/mail-server_helps.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/src/mail-server_helps.ycp?r… ============================================================================== --- trunk/mail/src/mail-server_helps.ycp (original) +++ trunk/mail/src/mail-server_helps.ycp Thu Mar 29 15:24:22 2012 @@ -25,7 +25,7 @@ /* Setup dialog help 1/1 */ "setup" : _("<big>Set Up Mail Server Configuration</big> -Please wait... + ") , /* Read dialog help 1/2 */ "read" : _("<big>Initializing Mail Server Configuration</big> @@ -85,18 +85,18 @@ ") + /* MailPrevention dialog help 2/3 */ _("<big>Start Virus Scanner AMAVIS:</big> -If you start the virus scanner AMAVIS, your e-mails will be scanned for viruses and and for spam. +If you start the virus scanner AMAVIS, your emails will be scanned for viruses and and for spam. The virus scanner engine Clamavd and the spam finder SpamAssassin will be installed -and configured too. You can also install other (commercial) virus scanner engines. +and configured as well. You can also install other (commercial) virus scanner engines. ") + /* MailPrevention dialog help 3/3 */ _("<big>Configure Spam Learning Extension:</big> The spam learning extension can only be configured if the local delivery method is cyrus imapd. -In this case the shared folders NewSpam and NoSpam will be created. Spam e-mail +In this case the shared folders NewSpam and NoSpam will be created. Spam email which was not detected by SpamAssassin should be put into the folder NewSpam. -If you want your spam finder to be most effective you should also put non spam e-mail into -the folder NoSpam. The e-mails in this folder cannot be read by anyone. +If you want your spam finder to be most effective you should also put non-spam email into +the folder NoSpam. The emails in this folder cannot be read by anyone. "), @@ -146,15 +146,15 @@ ") + /* MailLocalDomains dialog help 2/3 */ _("Note: You can create and set up the domains with the YaST -DNS server module. In this module, you only can set the properties +DNS server module. In the current module, you only can set the properties concerning the mail server. ")+ /* MailLocalDomains dialog help 3/3 */ _("<big>Type:</big> You can define virtual and local domains. In virtual domains, only users -assigned a mail address in the domain can receive mail. -In local domains, all user can get mails. Assign virtual mail +assigned an email address in the domain can receive emails. +In local domains, all users can get emails. Assign virtual email addresses in the YaST user module. "), Modified: trunk/mail/src/mail.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/src/mail.ycp?rev=67785&r1=6… ============================================================================== --- trunk/mail/src/mail.ycp (original) +++ trunk/mail/src/mail.ycp Thu Mar 29 15:24:22 2012 @@ -48,18 +48,18 @@ define string StartDialogHelp () ``{ return // Translators: start dialog help, part 1 of 4 - _("Email Server Configuration ") + + _("Mail Server Configuration ") + // Translators: start dialog help, part 2 of 4 _("This module will configure and start Postfix and, if necessary, the Cyrus IMAP server.")+ // Translators: start dialog help, part 3 of 4 _("Warning: Most home users can use the built-in -features of their e-mail application to send and -receive e-mail. They do not need this module. +features of their email application to send and +receive email. They do not need this module. ")+ // Translators: start dialog help, part 4 of 4 _("You need Postfix only to store -the e-mail on your local system, or for some special cases. +email on your local system or for some special cases. "); } @@ -68,11 +68,11 @@ y2milestone ("Mail configuration type %1", type); Wizard::SetScreenShotName ("mail-0-start"); - string caption = _("E-Mail Server Configuration"); + string caption = _("Mail Server Configuration"); term tskip_ask = `Left(`CheckBox(`id(`skip_ask), _("Skip this page in the future"))); string status = _("Mail server is not configured.")+"\n"+ - _("Select configuration type according your personal needs")+"\n"+ - _("If you want to use sendmail as your MTA you have to use Standard configuration.")+ + _("Select configuration type according your needs.")+"\n"+ + _("If you want to use sendmail as your MTA, you have to use the Standard configuration.")+ _("The Advanced configuration use LDAP as backend and will configure your system as LDAP-Client and setup an LDAP-Server if necessary."); if( first ) { Modified: trunk/mail/src/ui.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/src/ui.ycp?rev=67785&r1=677… ============================================================================== --- trunk/mail/src/ui.ycp (original) +++ trunk/mail/src/ui.ycp Thu Mar 29 15:24:22 2012 @@ -375,7 +375,7 @@ `VBox ( WJ_MakeWidget (`outgoing_mail_server), // TLS - `Label (_("The server use &TLS")), + `Label (_("The server uses &TLS.")), `RadioButtonGroup(`id(`TLS), `HBox( `Left(`RadioButton(`id("no"), _("No"), TLSnone)), Modified: trunk/mail/src/widgets.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/src/widgets.ycp?rev=67785&r… ============================================================================== --- trunk/mail/src/widgets.ycp (original) +++ trunk/mail/src/widgets.ycp Thu Mar 29 15:24:22 2012 @@ -763,8 +763,8 @@ // help text + _(" Enabling DKIM for outgoing emails requires additional actions. A SSL key -will be generated for the 'mydomain'-value defined in postfix. A new service -'submission' will be configured in postfix. After this is set up you can send +will be generated for the 'mydomain' value defined in Postfix. A new service +'submission' will be configured in Postfix. After this is set up you can send email with this service 'submission' from 'mynetworks' with enabled SASL authentication. Only the emails sent by this new service will be signed with the domain key. @@ -773,14 +773,14 @@ _(" The public key of the domain key needs to be offered by a Domain Name Service. The public key will be saved as a DNS TXT record -into /var/db/dkim/[mydomain].public.txt and needs to be deployed to an +in /var/db/dkim/[mydomain].public.txt and needs to be deployed to an according Domain Name Service. If there is a name service -running on this server, which is the authoritative server for that domain the +running on this server, which is the authoritative server for that domain, the public key will be added as a TXT record to that domain zone automatically. ") + // help text - _("Enabling DKIM support the virus scanning (AMaViS) will be enabled too."), + _("If you enable DKIM support, the virus scanning (AMaViS) will be enabled too."), "get": Get_use_dkim, "set": Set_use_dkim, ], -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67784 - in /trunk/live-installer: package/yast2-live-installer.changes src/inst_live_simple_proposal.ycp src/live-installer.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:23:51 2012 New Revision: 67784 URL: http://svn.opensuse.org/viewcvs/yast?rev=67784&view=rev Log: - merged proofread texts Modified: trunk/live-installer/package/yast2-live-installer.changes trunk/live-installer/src/inst_live_simple_proposal.ycp trunk/live-installer/src/live-installer.ycp Modified: trunk/live-installer/package/yast2-live-installer.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/package/yast2-liv… ============================================================================== --- trunk/live-installer/package/yast2-live-installer.changes (original) +++ trunk/live-installer/package/yast2-live-installer.changes Thu Mar 29 15:23:51 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:23:27 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Tue Aug 30 14:43:52 CEST 2011 - jsrain(a)suse.cz - do not set the root device for mkinitrd explicitly (bnc#714650) Modified: trunk/live-installer/src/inst_live_simple_proposal.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/src/inst_live_sim… ============================================================================== --- trunk/live-installer/src/inst_live_simple_proposal.ycp (original) +++ trunk/live-installer/src/inst_live_simple_proposal.ycp Thu Mar 29 15:23:51 2012 @@ -19,7 +19,7 @@ Wizard::SetContents ( // dialog caption - _("Installation settings"), + _("Installation Settings"), // label `Label (_("Analyzing the system...")), "", @@ -142,8 +142,9 @@ Use Accept to perform a new installation with the values displayed.") // help text 2/3 + _(" -To change the values click the respective headline -or select Change Installation Settings") +To change the values, click the respective headline +or select Change Installation Settings. +") // help text 3/3 + _(" Your hard disk has not been modified, you can still safely abort. @@ -152,7 +153,7 @@ Wizard::SetContents ( - _("Installation settings"), + _("Installation Settings"), contents, help, GetInstArgs::enable_back(), Modified: trunk/live-installer/src/live-installer.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/live-installer/src/live-installe… ============================================================================== --- trunk/live-installer/src/live-installer.ycp (original) +++ trunk/live-installer/src/live-installer.ycp Thu Mar 29 15:23:51 2012 @@ -44,7 +44,8 @@ if (! Popup::ContinueCancel (sformat (_("Your computer has less than %1 of memory. This may not be sufficient for the live installation, especially when installing while running other applications. -Before continuing, finish all running applications."), "1 GB"))) +Before continuing, close all running applications. +"), "1 GB"))) { UI::CloseDialog(); return nil; @@ -81,8 +82,9 @@ { // continue/cancel pop-up if (! Popup::ContinueCancel (_("YaST detected a mounted removable media. YaST cannot install -the system on media which is mounted. -To install the system on these media, unmount them first."))) +the system on mounted media. +Unmount the media to install the system on it. +"))) { Storage::SwitchUiAutomounter(true); UI::CloseDialog(); -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67783 - in /trunk/kerberos-server: package/yast2-kerberos-server.changes src/KerberosServer.pm src/helps.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:20:20 2012 New Revision: 67783 URL: http://svn.opensuse.org/viewcvs/yast?rev=67783&view=rev Log: - merged proofread texts Modified: trunk/kerberos-server/package/yast2-kerberos-server.changes trunk/kerberos-server/src/KerberosServer.pm trunk/kerberos-server/src/helps.ycp Modified: trunk/kerberos-server/package/yast2-kerberos-server.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-server/package/yast2-ke… ============================================================================== --- trunk/kerberos-server/package/yast2-kerberos-server.changes (original) +++ trunk/kerberos-server/package/yast2-kerberos-server.changes Thu Mar 29 15:20:20 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:20:06 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Mon Sep 26 11:26:40 CEST 2011 - visnov(a)suse.cz - Set dialog title and icon Modified: trunk/kerberos-server/src/KerberosServer.pm URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-server/src/KerberosServ… ============================================================================== --- trunk/kerberos-server/src/KerberosServer.pm (original) +++ trunk/kerberos-server/src/KerberosServer.pm Thu Mar 29 15:20:20 2012 @@ -838,7 +838,7 @@ if(! -e "/usr/share/doc/packages/krb5/kerberos.schema") { y2error("Kerberos schema file not found"); - $errorMsg = _("Kerberos schema file not found"); + $errorMsg = _("Kerberos schema file not found."); $errorDetails = "/usr/share/doc/packages/krb5/kerberos.schema not found."; return 0; } @@ -1122,7 +1122,7 @@ my $pid = open3(\*IN, \*OUT, \*ERR, "/usr/lib/mit/sbin/kdb5_ldap_util", @cmdArgs) or do { y2error("Can not execute kdb5_ldap_util: $!"); - $errorMsg = _("Cannot execute kdb5_ldap_util ."); + $errorMsg = _("Cannot execute kdb5_ldap_util."); $errorDetails = "$!"; return 0; }; @@ -1170,7 +1170,7 @@ $pid = open3(\*IN, \*OUT, \*ERR, "/usr/lib/mit/sbin/kdb5_ldap_util", @cmdArgs) or do { y2error("Can not execute kdb5_ldap_util: $!"); - $errorMsg = _("Cannot execute kdb5_ldap_util ."); + $errorMsg = _("Cannot execute kdb5_ldap_util."); $errorDetails = "$!"; return 0; }; @@ -1219,7 +1219,7 @@ $pid = open3(\*IN, \*OUT, \*ERR, "/usr/lib/mit/sbin/kdb5_ldap_util", @cmdArgs) or do { y2error("Can not execute kdb5_ldap_util: $!"); - $errorMsg = _("Cannot execute kdb5_ldap_util ."); + $errorMsg = _("Cannot execute kdb5_ldap_util."); $errorDetails = "$!"; return 0; }; @@ -1962,7 +1962,7 @@ my $pid = open3(\*IN, \*OUT, \*ERR, "/usr/lib/mit/sbin/kdb5_ldap_util", @cmdArgs) or do { y2error("Cannot execute kdb5_ldap_util: $!"); - $errorMsg = _("Cannot execute kdb5_ldap_util ."); + $errorMsg = _("Cannot execute kdb5_ldap_util."); $errorDetails = "$!"; return 0; }; @@ -2129,7 +2129,7 @@ my $pid = open3(\*IN, \*OUT, \*ERR, "/usr/lib/mit/sbin/kdb5_util", @cmdArgs) or do { y2error("Can not execute kdb5_util: $!"); - $errorMsg = _("Cannot execute kdb5_util ."); + $errorMsg = _("Cannot execute kdb5_util."); $errorDetails = "$!"; return 0; }; @@ -2324,7 +2324,7 @@ # KerberosServer read dialog caption - my $caption = __("Initializing Kerberos server configuration"); + my $caption = __("Initializing Kerberos Server Configuration"); my $steps = 2; @@ -2421,7 +2421,7 @@ $errorDetails = ""; # KerberosServer read dialog caption - my $caption = __("Saving Kerberos server configuration"); + my $caption = __("Saving Kerberos Server Configuration"); my $steps = 2; Modified: trunk/kerberos-server/src/helps.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-server/src/helps.ycp?re… ============================================================================== --- trunk/kerberos-server/src/helps.ycp (original) +++ trunk/kerberos-server/src/helps.ycp Thu Mar 29 15:20:20 2012 @@ -38,7 +38,7 @@ /* Read dialog help 1/2 */ "read" : _("<big>Initializing Kerberos Server Configuration</big> -Please wait... + ") + /* Read dialog help 2/2 */ @@ -48,7 +48,7 @@ /* Write dialog help 1/2 */ "write" : _("<big>Saving Kerberos Server Configuration</big> -Please wait... + ") + /* Write dialog help 2/2 */ @@ -58,7 +58,7 @@ "), /* Help text: ask for database backend 1/4 */ - "AskDBtype" : _("Here you specify where the Kerberos server should store the data.") + + "AskDBtype" : _("Specify where the Kerberos server should store the data.") + /* Help text: ask for database backend 2/4 */ _("<big>Local Database</big> will create a local database for storing the credentials.") + @@ -69,13 +69,13 @@ ") + /* Help text: ask for database backend 4/4 */ - _("<big>Use Existing LDAP Server as Database Back-End</big> gives you the possibility -to use an external LDAP server as database back-end. + _("<big>Use Existing LDAP Server as Database Back-End</big> gives you the +option to use an external LDAP server as database back-end. "), /* Help text: basic settings 1/2 */ - "basic" : _("Here you can specify the <big>Realm</big> and the <big>Master Password</big> for your Kerberos server.") + + "basic" : _("Specify the <big>Realm</big> and the <big>Master Password</big> for your Kerberos server.") + /* Help text: basic settings 2/2 */ _("Although your Kerberos realm can be any ASCII string, the convention is to use upper-case letters as in your domain name. @@ -86,7 +86,7 @@ "useldap" : _("In this dialog, edit some parameters for the LDAP server.") + /* Help text: Use existing LDAP server 2/6 */ - _("<big>LDAP Server URI</big> specify the location of the LDAP server.For example,<tt>ldaps://host.domain.com</tt> .") + + _("With <big>LDAP Server URI</big> specify the location of the LDAP\nserver. For example, <tt>ldaps://host.domain.com</tt>.") + /* Help text: Use existing LDAP server 3/6 */ _("With <big>LDAP Base DN</big> you can change the base DN of the LDAP server.") + @@ -144,7 +144,7 @@ "adv_database_name" : _("This string specifies the location of the Kerberos database for this realm."), /* advanced item help: acl_file*/ - "adv_acl_file" : _("This string specifies the location of the access control list (acl) file that kadmin uses to determine the principals' permissions on the database."), + "adv_acl_file" : _("This string specifies the location of the access control list (ACL) file that kadmin uses to determine the principals' permissions on the database."), /* advanced item help: admin_keytab */ "adv_admin_keytab" : _("This string specifies the location of the keytab file that kadmin uses to authenticate to the database."), @@ -242,7 +242,7 @@ "adv_ldap_conns_per_server" : _("This LDAP specific tag indicates the number of connections to be maintained via the LDAP server."), /* advanced item help : ldap_service_password_file*/ - "adv_ldap_service_password_file" : _("This LDAP specific tag indicates the file containing the stashed passwords for the objects used for starting the Kerberos servers."), + "adv_ldap_service_password_file" : _("This LDAP-specific tag indicates the file containing the stashed passwords for the objects used for starting the Kerberos servers."), /* advanced item help : kdb_subtrees*/ "adv_kdb_subtrees" : _("Specifies the list of subtrees containing the principals of a realm. The list contains the DNs of the subtree objects separated by colon(:).The search scope specifies the scope for searching the principals under the subtree."), -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67782 - /tags/stable-2_22_2/kerberos-client/
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:19:25 2012 New Revision: 67782 URL: http://svn.opensuse.org/viewcvs/yast?rev=67782&view=rev Log: Created tag stable-2_22_2 for kerberos-client Added: tags/stable-2_22_2/kerberos-client/ - copied from r67781, trunk/kerberos-client/ -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67781 - in /trunk/kerberos-client: VERSION package/yast2-kerberos-client.changes src/dialogs.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:18:57 2012 New Revision: 67781 URL: http://svn.opensuse.org/viewcvs/yast?rev=67781&view=rev Log: - merged proofread texts Modified: trunk/kerberos-client/VERSION trunk/kerberos-client/package/yast2-kerberos-client.changes trunk/kerberos-client/src/dialogs.ycp Modified: trunk/kerberos-client/VERSION URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-client/VERSION?rev=6778… ============================================================================== --- trunk/kerberos-client/VERSION (original) +++ trunk/kerberos-client/VERSION Thu Mar 29 15:18:57 2012 @@ -1 +1 @@ -2.22.1 +2.22.2 Modified: trunk/kerberos-client/package/yast2-kerberos-client.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-client/package/yast2-ke… ============================================================================== --- trunk/kerberos-client/package/yast2-kerberos-client.changes (original) +++ trunk/kerberos-client/package/yast2-kerberos-client.changes Thu Mar 29 15:18:57 2012 @@ -1,4 +1,10 @@ ------------------------------------------------------------------- +Thu Mar 29 15:18:30 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts +- 2.22.2 + +------------------------------------------------------------------- Fri Jan 13 11:53:33 CET 2012 - jsuchome(a)suse.cz - confirmed license Modified: trunk/kerberos-client/src/dialogs.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/kerberos-client/src/dialogs.ycp?… ============================================================================== --- trunk/kerberos-client/src/dialogs.ycp (original) +++ trunk/kerberos-client/src/dialogs.ycp Thu Mar 29 15:18:57 2012 @@ -465,7 +465,7 @@ // checkbox label "label" : _("For&wardable"), // help text - "help" : _("Forwardable lets you transfer your complete identity (TGT) to another machine. Proxiable only lets you transfer particular tickets. Select if the options should be applied to all PAM services, none of them or enter a list of services separated by spaces."), + "help" : _("Forwardable lets you transfer your complete identity (TGT) to another machine. Proxiable only lets you transfer particular tickets. Select wheter the options should be applied to all PAM services, none of them or enter a list of services separated by spaces."), "init" : InitCombo, "store" : StoreDescription, "handle" : HandleDescription, @@ -496,7 +496,7 @@ // checkbox label "label" : _("Kerberos Support for Open&SSH Client"), // help text - "help" : _("To enable Kerberos support for your OpenSSH client, select Kerberos Support for OpenSSH Client. In such a case, Kerberos tickets are used for user authentication on the SSH server."), + "help" : _("To enable Kerberos support for your OpenSSH client, select Kerberos Support for OpenSSH Client. In this case, Kerberos tickets are used for user authentication on the SSH server."), "init" : InitCheckBox, "store" : StoreDescription, "handle" : HandleDescription, @@ -682,9 +682,9 @@ "widget" : `combobox, "opt" : [ `hstretch, `notify, `editable ], // textentry label - "label" : _("E&xternal credentials"), + "label" : _("E&xternal Credentials"), // help text - "help" : _("List the services allowed to provide credentials in External credentials."), + "help" : _("List the services allowed to provide credentials in External Credentials."), "init" : InitCombo, "store" : StoreDescription, "handle" : HandleDescription, -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0

[yast-commit] r67780 - in /trunk/kdump: package/yast2-kdump.changes src/dialogs.ycp src/helps.ycp src/kdump.ycp
by jsuchome＠svn2.opensuse.org 29 Mar '12

29 Mar '12

Author: jsuchome Date: Thu Mar 29 15:18:11 2012 New Revision: 67780 URL: http://svn.opensuse.org/viewcvs/yast?rev=67780&view=rev Log: - merged proofread texts Modified: trunk/kdump/package/yast2-kdump.changes trunk/kdump/src/dialogs.ycp trunk/kdump/src/helps.ycp trunk/kdump/src/kdump.ycp Modified: trunk/kdump/package/yast2-kdump.changes URL: http://svn.opensuse.org/viewcvs/yast/trunk/kdump/package/yast2-kdump.change… ============================================================================== --- trunk/kdump/package/yast2-kdump.changes (original) +++ trunk/kdump/package/yast2-kdump.changes Thu Mar 29 15:18:11 2012 @@ -1,4 +1,9 @@ ------------------------------------------------------------------- +Thu Mar 29 15:17:59 CEST 2012 - jsuchome(a)suse.cz + +- merged proofread texts + +------------------------------------------------------------------- Thu Sep 29 11:48:29 CEST 2011 - visnov(a)suse.cz - set dialog title Modified: trunk/kdump/src/dialogs.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/kdump/src/dialogs.ycp?rev=67780&… ============================================================================== --- trunk/kdump/src/dialogs.ycp (original) +++ trunk/kdump/src/dialogs.ycp Thu Mar 29 15:18:11 2012 @@ -362,7 +362,7 @@ ) ))), - `Frame ( _("Notification Email addresses"),`HBox(`HSpacing(1),`VBox( + `Frame ( _("Notification Email Addresses"),`HBox(`HSpacing(1),`VBox( `Left("NotificationTo"), `Left("NotificationCC") ))), @@ -387,7 +387,7 @@ `Left("KdumpCommandLineAppend") ))), `VSpacing(1), - `Frame ( _("Dumps Settings"),`HBox(`HSpacing(1),`VBox( + `Frame ( _("Dump Settings"),`HBox(`HSpacing(1),`VBox( `Left("EnableDeleteImages"), `Left("NumberDumps"), `Left("EnableReboot"), Modified: trunk/kdump/src/helps.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/kdump/src/helps.ycp?rev=67780&r1… ============================================================================== --- trunk/kdump/src/helps.ycp (original) +++ trunk/kdump/src/helps.ycp Thu Mar 29 15:18:11 2012 @@ -39,7 +39,7 @@ /*Enable/Disable Kdump - RadioButtons 1/1*/ "StartRadioBut" : _("Enable/Disable Kdump Enable or disable kdump. The boot option crashkernel parameter is added/removed. - To apply changes a reboot is necessary. + To apply changes, a reboot is necessary. "), @@ -79,7 +79,9 @@ Server Name - The name of server. Port - The port number for connection. Directory on Server - The path for saving kdump images. - User Name for ssh connection. Password for ssh connection. ")+ + User Name for SSH connection. + Password for SSH connection. +")+ /* Dump Format - RadioButtons 5/6*/ _("NFS - Save kdump image on NFS. Server Name - The name of nfs server. @@ -104,9 +106,10 @@ /* Kdump Command Line Append - TextEntry 1/1*/ "KdumpCommandLineAppend" : _("Kdump Command Line Append - Setting this option means _append_ values to the default command line string. + Set this option to _append_ values to the default command line string. The string will be appended if the Kdump Command Line - is set. \n"), + is set. +"), /* Enable Immediate Reboot After Saving the Core - CheckBox 1/1*/ "EnableReboot" : _("Enable Immediate Reboot After Saving the Core - @@ -119,30 +122,34 @@ /*Enable Copy Ke&rnel into the Dump Directory - CheckBox 1/1*/ "EnableCopyKernel" : _("Enable Copy Kernel into the Dump Directory - - If it is selected the kernel itself and the - debugging information (if installed) gets copied into the dump - directory. The default is \"off\". It is useful have - everything in place for debugging. "), + If this option is selected, the kernel and the + debugging information (if installed) are copied into the dump + directory. The default is \"off\". It is useful to have + everything in place for debugging. +"), /* SMTP Server*/ - "SMTPServer" : _("SMTP Server used for sending a notification email after a dump has been taken."), + "SMTPServer" : _("SMTP Server used for sending a notification email after a dump."), /*SMTP User Name */ - "SMTPUser" : _("User Name for SMTP authetication when SMTP Server is set. This is optional, - without username/password, plain SMTP will be used."), + "SMTPUser" : _("User Name for SMTP authetication when SMTP Server is + set. This is optional. If you do not specifiy a username and password, plain SMTP will be used. +"), /*SMTP Password */ - "SMTPPassword": _("Password for SMTP authetication when SMTP Server is set. This is optional, - without username/password, plain SMTP will be used"), + "SMTPPassword": _("Password for SMTP authetication when SMTP Server is set. This + is optional. If you do not specify a username and password, plain SMTP will be used. +"), /* Notification To (email addresses) */ - "NotificationTo": _("Notification To mail address to which a notification mail will be sent when a dump has been - saved."), + "NotificationTo": _("Notification To Specify the email address to which a notification email will be sent when a dump has been saved. +"), /* Notification CC (email addresses) */ - "NotificationCC": _("Notification CC is list of space-separated mail addresses to which notification mail will be - sent via Cc if a dump has been saved."), + "NotificationCC": _("Notification CC Specify a list of space-separated email addresses to + which a notification email will be sent via cc if a dump has been saved. +"), /* Number of Old Dumps (number) */ "NumberDumps" : _("Number of Old Dumps specifies how many old dumps are kept. If the number of dump files Modified: trunk/kdump/src/kdump.ycp URL: http://svn.opensuse.org/viewcvs/yast/trunk/kdump/src/kdump.ycp?rev=67780&r1… ============================================================================== --- trunk/kdump/src/kdump.ycp (original) +++ trunk/kdump/src/kdump.ycp Thu Mar 29 15:18:11 2012 @@ -584,7 +584,7 @@ return true; } else { // TRANSLATORS: CommandLine error message - CommandLine::Error(_("Wrong value of options \"server\".")); + CommandLine::Error(_("Wrong value for option \"server\".")); return false; } @@ -605,7 +605,7 @@ return true; } else { // TRANSLATORS: CommandLine error message - CommandLine::Error(_("Wrong value of options \"user\".")); + CommandLine::Error(_("Wrong value for option \"user\".")); return false; } @@ -642,7 +642,7 @@ return true; } else { // TRANSLATORS: CommandLine error message - CommandLine::Error(_("Wrong value of options \"email\".")); + CommandLine::Error(_("Wrong value for option \"email\".")); return false; } @@ -663,7 +663,7 @@ return true; } else { // TRANSLATORS: CommandLine error message - CommandLine::Error(_("Wrong value of options \"email\".")); + CommandLine::Error(_("Wrong value for option \"email\".")); return false; } @@ -794,7 +794,7 @@ "smtpserver": $[ "handler" : cmdKdumpSMTPServer, // TRANSLATORS: CommandLine help - "help" : _("SMTP Server for sending notification messages."), + "help" : _("SMTP server for sending notification messages."), "example" : [ "smtpserver server=smtp.server.com", ], @@ -803,7 +803,7 @@ "smtpuser": $[ "handler" : cmdKdumpSMTPUser, // TRANSLATORS: CommandLine help - "help" : _("SMTP Username for sending notification messages."), + "help" : _("SMTP username for sending notification messages."), "example" : [ "smtpuser user=foo_user", ], @@ -812,7 +812,7 @@ "smtppass": $[ "handler" : cmdKdumpSMTPPass, // TRANSLATORS: CommandLine help - "help" : _("SMTP Password for sending notification messages. Path of file which includes password (plain text file)"), + "help" : _("SMTP password for sending notification messages. Path of file which includes password (plain text file)."), "example" : [ "smtppass pass=/path/to/file", ], -- To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: yast-commit+help(a)opensuse.org

1 0