Author: rpmcruz
Date: Mon Dec 31 00:46:07 2007
New Revision: 43249
URL: http://svn.opensuse.org/viewcvs/yast?rev=43249&view=rev
Log:
* src/ygtkzyppwrapper.cc: noticed, from another project, that we should handle
some special cases there on the model. I guess the views aren't using them,
but we better.
* src/YGPackageSelector.cc: hide Patches entry for ordinary package management
(sw_single doesn't init patches, so only installed were shown, which could fool
the user into not using the online_update).
Of course, we are still pooling patches for the changes pane. We need to improve
filtering to avoid this. We could allow for multiple instances of some Filter object
for a Pool, acting on them as if they were an union. But I guess I'd just
do that in a Field-basis.
Modified:
trunk/gtk/ChangeLog
trunk/gtk/src/YGPackageSelector.cc
trunk/gtk/src/ygtkzyppwrapper.cc
Modified: trunk/gtk/ChangeLog
URL: http://svn.opensuse.org/viewcvs/yast/trunk/gtk/ChangeLog?rev=43249&r1=43248…
==============================================================================
--- trunk/gtk/ChangeLog (original)
+++ trunk/gtk/ChangeLog Mon Dec 31 00:46:07 2007
@@ -1,3 +1,17 @@
+2007-12-30 Ricardo Cruz <rpmcruz(a)alunos.dcc.fc.up.pt>
+
+ * src/ygtkzyppwrapper.cc: noticed, from another project, that we should handle
+ some special cases there on the model. I guess the views aren't using them,
+ but we better.
+
+ * src/YGPackageSelector.cc: hide Patches entry for ordinary package management
+ (sw_single doesn't init patches, so only installed were shown, which could fool
+ the user into not using the online_update).
+ Of course, we are still pooling patches for the changes pane. We need to improve
+ filtering to avoid this. We could allow for multiple instances of some Filter object
+ for a Pool, acting on them as if they were an union. But I guess I'd just
+ do that in a Field-basis.
+
2007-12-21 Ricardo Cruz <rpmcruz(a)alunos.dcc.fc.up.pt>
* src/yzyppwrapper.cc (Pool): build pool even for unintialized types.
Modified: trunk/gtk/src/YGPackageSelector.cc
URL: http://svn.opensuse.org/viewcvs/yast/trunk/gtk/src/YGPackageSelector.cc?rev…
==============================================================================
--- trunk/gtk/src/YGPackageSelector.cc (original)
+++ trunk/gtk/src/YGPackageSelector.cc Mon Dec 31 00:46:07 2007
@@ -854,7 +854,8 @@
gtk_combo_box_append_text (GTK_COMBO_BOX (m_type), _("Categories"));
gtk_combo_box_append_text (GTK_COMBO_BOX (m_type), _("Patterns"));
gtk_combo_box_append_text (GTK_COMBO_BOX (m_type), _("Languages"));
- gtk_combo_box_append_text (GTK_COMBO_BOX (m_type), _("Patches"));
+ if (update_mode)
+ gtk_combo_box_append_text (GTK_COMBO_BOX (m_type), _("Patches"));
gtk_combo_box_set_active (GTK_COMBO_BOX (m_type), update_mode ? 3 : 0);
g_signal_connect_after (G_OBJECT (m_type), "changed",
G_CALLBACK (combo_changed_cb), this);
Modified: trunk/gtk/src/ygtkzyppwrapper.cc
URL: http://svn.opensuse.org/viewcvs/yast/trunk/gtk/src/ygtkzyppwrapper.cc?rev=4…
==============================================================================
--- trunk/gtk/src/ygtkzyppwrapper.cc (original)
+++ trunk/gtk/src/ygtkzyppwrapper.cc Mon Dec 31 00:46:07 2007
@@ -253,32 +253,49 @@
}
}
-static gboolean ygtk_zypp_model_iter_children (GtkTreeModel *model, GtkTreeIter *iter,
- GtkTreeIter *parent)
+static gboolean ygtk_zypp_model_iter_has_child (GtkTreeModel *model, GtkTreeIter *iter)
{
- return FALSE;
+ return FALSE;
}
-static gboolean ygtk_zypp_model_iter_has_child (GtkTreeModel *model, GtkTreeIter *iter)
+static gboolean ygtk_zypp_model_iter_parent (GtkTreeModel *model, GtkTreeIter *iter,
+ GtkTreeIter *child)
{
return FALSE;
}
static gint ygtk_zypp_model_iter_n_children (GtkTreeModel *model, GtkTreeIter *iter)
{
+ if (iter == NULL) { // special case: root
+ YGtkZyppModel *zmodel = YGTK_ZYPP_MODEL (model);
+ int length = 0;
+ Ypp::Pool::Iter iter = zmodel->pool->getFirst();
+ while (iter) {
+ length++;
+ iter = zmodel->pool->getNext (iter);
+ }
+ return length;
+ }
return 0;
}
static gboolean ygtk_zypp_model_iter_nth_child (GtkTreeModel *model, GtkTreeIter *iter,
GtkTreeIter *parent, gint n)
{
+ if (parent == NULL) {
+ gboolean ret;
+ GtkTreePath *path = gtk_tree_path_new_from_indices (n, -1);
+ ret = ygtk_zypp_model_get_iter (model, iter, path);
+ gtk_tree_path_free (path);
+ return ret;
+ }
return FALSE;
}
-static gboolean ygtk_zypp_model_iter_parent (GtkTreeModel *model, GtkTreeIter *iter,
- GtkTreeIter *child)
+static gboolean ygtk_zypp_model_iter_children (GtkTreeModel *model, GtkTreeIter *iter,
+ GtkTreeIter *parent)
{
- return FALSE;
+ return ygtk_zypp_model_iter_nth_child (model, iter, parent, 0);
}
YGtkZyppModel *ygtk_zypp_model_new (Ypp::Query *query)
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: varkoly
Date: Sun Dec 30 21:38:59 2007
New Revision: 43247
URL: http://svn.opensuse.org/viewcvs/yast?rev=43247&view=rev
Log:
after make -f
Modified:
trunk/autofs/aclocal.m4
trunk/autofs/install-sh
trunk/autofs/missing
trunk/autofs/pluglib-bindings.ami
Modified: trunk/autofs/aclocal.m4
URL: http://svn.opensuse.org/viewcvs/yast/trunk/autofs/aclocal.m4?rev=43247&r1=4…
==============================================================================
--- trunk/autofs/aclocal.m4 (original)
+++ trunk/autofs/aclocal.m4 Sun Dec 30 21:38:59 2007
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,7 +11,12 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -21,14 +26,29 @@
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -85,14 +105,14 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
+# serial 8
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -101,8 +121,10 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -118,8 +140,8 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -142,16 +164,20 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
fi
# test whether we have cygpath
@@ -171,6 +197,9 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -206,6 +235,10 @@
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
@@ -241,7 +274,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -267,14 +300,14 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -290,6 +323,7 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
@@ -300,7 +334,7 @@
fi
])
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -308,60 +342,23 @@
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
# Helper functions for option handling. -*- Autoconf -*-
@@ -490,9 +487,21 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
Modified: trunk/autofs/install-sh
URL: http://svn.opensuse.org/viewcvs/yast/trunk/autofs/install-sh?rev=43247&r1=4…
==============================================================================
--- trunk/autofs/install-sh (original)
+++ trunk/autofs/install-sh Sun Dec 30 21:38:59 2007
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2005-05-14.22
+scriptversion=2006-10-14.15
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,15 +39,24 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
@@ -58,7 +67,13 @@
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-chmodcmd="$chmodprog 0755"
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
chowncmd=
chgrpcmd=
stripcmd=
@@ -95,7 +110,7 @@
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
-while test -n "$1"; do
+while test $# -ne 0; do
case $1 in
-c) shift
continue;;
@@ -111,9 +126,15 @@
--help) echo "$usage"; exit $?;;
- -m) chmodcmd="$chmodprog $2"
+ -m) mode=$2
shift
shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
continue;;
-o) chowncmd="$chownprog $2"
@@ -136,25 +157,33 @@
--version) echo "$0 $scriptversion"; exit $?;;
- *) # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- test -n "$dir_arg$dstarg" && break
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
+ --) shift
break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
esac
done
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+fi
+
+if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
@@ -164,6 +193,33 @@
exit 0
fi
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
for src
do
# Protect names starting with `-'.
@@ -173,15 +229,11 @@
if test -n "$dir_arg"; then
dst=$src
- src=
-
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
else
+
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
@@ -208,53 +260,188 @@
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
- dst=$dst/`basename "$src"`
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
fi
fi
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
+ obsolete_mkdir_used=false
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
-
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- shift
- IFS=$oIFS
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
- pathcomp=
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
- pathcomp=$pathcomp/
- done
+ fi
fi
if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
- dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
@@ -262,10 +449,9 @@
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -276,10 +462,10 @@
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
@@ -291,11 +477,12 @@
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
|| {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
else
@@ -304,16 +491,13 @@
} &&
# Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ $doit $mvcmd "$dsttmp" "$dst"
}
- }
- fi || { (exit 1); exit 1; }
-done
+ } || exit 1
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit 0
-}
+ trap '' 0
+ fi
+done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
Modified: trunk/autofs/missing
URL: http://svn.opensuse.org/viewcvs/yast/trunk/autofs/missing?rev=43247&r1=4324…
==============================================================================
--- trunk/autofs/missing (original)
+++ trunk/autofs/missing Sun Dec 30 21:38:59 2007
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996.
@@ -33,6 +33,8 @@
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +46,7 @@
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -77,6 +79,7 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case "$1" in
+case $1 in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
@@ -135,7 +138,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $1 in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -164,7 +167,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
@@ -214,25 +217,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -244,18 +247,18 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
@@ -267,11 +270,9 @@
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
@@ -289,11 +290,17 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -317,13 +324,13 @@
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
Modified: trunk/autofs/pluglib-bindings.ami
URL: http://svn.opensuse.org/viewcvs/yast/trunk/autofs/pluglib-bindings.ami?rev=…
==============================================================================
--- trunk/autofs/pluglib-bindings.ami (original)
+++ trunk/autofs/pluglib-bindings.ami Sun Dec 30 21:38:59 2007
@@ -1,5 +1,5 @@
# -*- makefile -*- Automake include file
-# $Id: pluglib-bindings.ami 27327 2006-01-25 14:12:13Z mvidner $
+# $Id: pluglib-bindings.ami 35906 2007-02-06 15:26:47Z mvidner $
# Wraps a pluglib for use by YaST. Done by using Swig for Perl, adding
# type information. Compiles, installs.
@@ -43,7 +43,9 @@
if test -d $(PLUGLIB_MODULE); then \
rm -f $(PLUGLIB_MODULE)/*.pm; \
fi
- sabcmd $(PLGB_TYPEINFO_XSL) $< | perl $(PLGB_TYPEINFO_FILTER)
+ sabcmd $(PLGB_TYPEINFO_XSL) $< > $*.tpi
+ perl $(PLGB_TYPEINFO_FILTER) < $*.tpi
+ rm $*.tpi
# Install the Perl modules
PLGB_PMdir = $(moduledir)
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: varkoly
Date: Sun Dec 30 21:37:20 2007
New Revision: 43246
URL: http://svn.opensuse.org/viewcvs/yast?rev=43246&view=rev
Log:
Created tag stable-2_15_3 for autofs
Added:
tags/stable-2_15_3/autofs/
- copied from r43245, trunk/autofs/
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: varkoly
Date: Sun Dec 30 21:09:46 2007
New Revision: 43244
URL: http://svn.opensuse.org/viewcvs/yast?rev=43244&view=rev
Log:
Fixing typo
Modified:
trunk/autofs/src/helps.ycp
Modified: trunk/autofs/src/helps.ycp
URL: http://svn.opensuse.org/viewcvs/yast/trunk/autofs/src/helps.ycp?rev=43244&r…
==============================================================================
--- trunk/autofs/src/helps.ycp (original)
+++ trunk/autofs/src/helps.ycp Sun Dec 30 21:09:46 2007
@@ -88,7 +88,7 @@
/* EntryDialog for NFS entry */
"EntryDialogNFS" : _("<p><b><big>NFS Entry</big></b><br>
In case of NFS entry the <b>Server</b> is the DNS-name or IP-address of the NFS-server.<br>
-The <b>Path</p> is the absolute pfad of the directory on the NFS-server.<br>
+The <b>Path</p> is the absolute path of the directory on the NFS-server.<br>
The <b>Options</b> must be valid options of the <b>mount</b>(8) command for NFS file system.<br>
<br></p>"),
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: varkoly
Date: Sun Dec 30 19:34:04 2007
New Revision: 43242
URL: http://svn.opensuse.org/viewcvs/yast?rev=43242&view=rev
Log:
new version for stable
Modified:
trunk/mail/package/yast2-mail.changes
Modified: trunk/mail/package/yast2-mail.changes
URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/package/yast2-mail.changes?…
==============================================================================
--- trunk/mail/package/yast2-mail.changes (original)
+++ trunk/mail/package/yast2-mail.changes Sun Dec 30 19:34:04 2007
@@ -1,12 +1,16 @@
-------------------------------------------------------------------
-Tue Nov 27 11:53:53 CET 2007 - pv(a)suse.de
+Sun Dec 30 19:29:49 CET 2007 - pv(a)suse.de
+- #278535 - YaST2 mail dialog does not offer help on the "No connection" setting
+- bugfix: it was not possible to connect to an existen LDAP-server during
+ the configuration
+- bugfix: check if bind-utils is installed. We need the dnsZone.schema
+ file
- #337398 - Long time bug in yast mail transfer agent module regarding
relayhost port setting
- #335524 Advanced Mail Transfer Agent cannot access LDAP server
- fixing the return values of wizard elements
- 2.15.24
-
-------------------------------------------------------------------
Mon Sep 24 16:54:32 CEST 2007 - pv(a)suse.de
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: varkoly
Date: Sun Dec 30 19:28:50 2007
New Revision: 43241
URL: http://svn.opensuse.org/viewcvs/yast?rev=43241&view=rev
Log:
Bug 278535 - YaST2 mail dialog does not offer help on the "No
connection" setting
Modified:
trunk/mail/src/helps.ycp
Modified: trunk/mail/src/helps.ycp
URL: http://svn.opensuse.org/viewcvs/yast/trunk/mail/src/helps.ycp?rev=43241&r1=…
==============================================================================
--- trunk/mail/src/helps.ycp (original)
+++ trunk/mail/src/helps.ycp Sun Dec 30 19:28:50 2007
@@ -79,7 +79,9 @@
<p>How are you connected to the Internet? With a dial-up connection,
mails will not be sent immediately but rather after invoking
<b>sendmail -q</b>.</p>
-");
+") +
+_("<p>Choosing <b>No connection</b> the mail server will be started
+but only local mail transport is possible. The MTA listens on localhost.</p>");
return s;
}
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org
Author: coolo
Date: Sat Dec 29 14:26:05 2007
New Revision: 43240
URL: http://svn.opensuse.org/viewcvs/yast?rev=43240&view=rev
Log:
submit to autobuild
Modified:
trunk/qt/package/yast2-qt.changes
Modified: trunk/qt/package/yast2-qt.changes
URL: http://svn.opensuse.org/viewcvs/yast/trunk/qt/package/yast2-qt.changes?rev=…
==============================================================================
--- trunk/qt/package/yast2-qt.changes (original)
+++ trunk/qt/package/yast2-qt.changes Sat Dec 29 14:26:05 2007
@@ -1,4 +1,9 @@
-------------------------------------------------------------------
+Sat Dec 29 14:25:32 CET 2007 - coolo(a)suse.de
+
+- some fixes in the package selector
+
+-------------------------------------------------------------------
Fri Dec 21 18:38:53 CET 2007 - coolo(a)suse.de
- support `CurrentItem in timezone widget
--
To unsubscribe, e-mail: yast-commit+unsubscribe(a)opensuse.org
For additional commands, e-mail: yast-commit+help(a)opensuse.org