June 2024 - YaST Commits - openSUSE Mailing Lists

Build failed in Jenkins: yast-yast-iscsi-client-SLE-15-SP6 #4
by jenkins＠suse.de 16 Sep '24

16 Sep '24

See <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/4/display/redirect…> Changes: [shundhammer] Don't leak passwords to the log (bsc#1225432) [shundhammer] Version bump and change log ------------------------------------------ [...truncated 104,61 KiB...] [ 110s] first sets discovery authentication and later restores the initial config [ 110s] with bi-directional discovery authentication [ 110s] sets bi-directional discovery authentication and later restores the initial config [ 110s] #ScanDiscovered for iscsiadm -m session -P 1 [ 110s] with Current Portal: and Persistent Portal: differ [ 110s] returns list of connected targets with IPs of Persistent Portal [ 110s] #ScanDiscovered for iscsiadm -m node -P 1 [ 110s] with Portal: [ 110s] returns list of discovered targets with IPs of Portal [ 110s] #getiBFT [ 110s] when filtering output of 'iscsiadm -m fw' [ 110s] returns data in form of a map [ 110s] when could not get list of targets from firmware [ 110s] returns an empty map [ 110s] when not on x86 hardware [ 110s] returns an empty map [ 110s] #iscsiuio_relevant? [ 110s] there are no cards in the system supporting offloading [ 110s] returns false [ 110s] there are cards in the system supporting offloading [ 110s] but none of them use the bnx2i or qedi modules [ 110s] returns false [ 110s] and one of them uses de bnx2i module [ 110s] returns true [ 110s] and one of them uses de qedi module [ 110s] returns true [ 110s] and there are cards using both bnx2i and qedi modules [ 110s] returns true [ 110s] .GetOffloadItems [ 110s] with no network cards in the system [ 110s] returns an array of UI items [ 110s] provides 'default' as the only item [ 110s] with network cards not expected to support offloading [ 110s] returns an array of UI items [ 110s] provides 'default' as the only item [ 110s] with several network cards that could support offloading [ 110s] if none of the cards support offloading [ 110s] returns an array of UI items [ 110s] includes only 'default' and 'all' [ 110s] if some cards indeed support offloading [ 110s] returns an array of UI items [ 110s] includes 'default', 'all' and an entry for each offload card [ 110s] and ifconfig is not found [ 110s] sets the IPs in @offload_valid to 'unknown' [ 110s] and ifconfig is found [ 110s] sets the IPs in @offload_valid to 'unknown' [ 110s] and no active card is reported by iscsiadm [ 110s] pre-selects the item 'default' [ 110s] and one card is already associated to the first target [ 110s] selects by default the current offload card [ 110s] .connected [ 110s] if check_ip is true [ 110s] returns true if address, port, target name and interface match with a session [ 110s] returns false if only address, target name and interface match with a session [ 110s] returns false if only port, target name and interface match with a session [ 110s] returns false if only address, port and interface match with a session [ 110s] returns false if only address, port and target name match with a session [ 110s] if check_ip is false [ 110s] returns true if address, port, target name and interface match with a session [ 110s] returns true if only address, target name and interface match with a session [ 110s] returns true if only port, target name and interface match with a session [ 110s] returns false if only address, port and interface match with a session [ 110s] returns false if only address, port and target name match with a session [ 110s] .removeRecord [ 110s] if iscsiadm exit code is 0 [ 110s] returns true [ 110s] if iscsiadm exit code is different from 0 [ 110s] returns true [ 110s] [ 110s] Finished in 3.35 seconds (files took 0.65591 seconds to load) [ 110s] 102 examples, 0 failures [ 110s] [ 110s] + exit 0 [ 110s] Processing files: yast2-iscsi-client-4.6.2-1.noarch [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SC27UG [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd yast2-iscsi-client-4.6.2 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64/usr/share/licenses/yast2-iscsi-client [ 110s] + exit 0 [ 111s] Provides: application() application(YaST2/org.opensuse.yast.iSCSIClient.desktop) metainfo() metainfo(org.opensuse.yast.iSCSIClient.metainfo.xml) yast2-iscsi-client = 4.6.2-1 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Supplements: autoyast(iscsi-client) [ 111s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64 [ 111s] Wrote: /home/abuild/rpmbuild/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm [ 111s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.RqXKEp [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd yast2-iscsi-client-4.6.2 [ 111s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/yast2-iscsi-client-4.6.2-1.x86_64 [ 111s] + exit 0 [ 111s] ... checking for files with abuild user/group [ 111s] ... running 00-check-install-rpms [ 111s] ... installing all built rpms [ 111s] Preparing packages... [ 111s] yast2-iscsi-client-4.6.2-1.noarch [ 111s] ... running 50-check-binary-kernel-log [ 111s] ... running 50-check-core-files [ 111s] ... running 50-check-debuginfo [ 111s] ... testing for empty debuginfo packages [ 111s] ... running 50-check-filelist [ 111s] ... checking filelist [ 111s] ... running 50-check-gconf-scriptlets [ 111s] ... testing GConf scriptlet presence [ 111s] ... running 50-check-installtest [ 111s] ... testing for pre/postinstall scripts that are not idempotent [ 111s] ... running 50-check-invalid-provides [ 111s] ... running 50-check-invalid-requires [ 111s] ... running 50-check-kernel-build-id [ 111s] ... running 50-check-lanana [ 111s] ... running 50-check-libtool-deps [ 111s] ... testing devel dependencies required by libtool .la files [ 111s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 111s] ... running 50-check-packaged-twice [ 111s] ... running 50-check-permissions [ 111s] ... testing for modified permissions [ 111s] ... running 72-translate-appdata [ 111s] ... running 80-check-malware-scan-clamav [ 112s] unpacking /.build.packages/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm [ 112s] unpacking /.build.packages/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm [ 112s] clamscan -ir /usr/src/packages/BUILD/scan: [ 112s] LibClamAV Warning: ************************************************** [ 112s] LibClamAV Warning: *** The virus database is older than 7 days! *** [ 112s] LibClamAV Warning: *** Please update it as soon as possible. *** [ 112s] LibClamAV Warning: ************************************************** [ 129s] [ 129s] ----------- SCAN SUMMARY ----------- [ 129s] Known viruses: 8691864 [ 129s] Engine version: 0.103.11 [ 129s] Scanned directories: 30 [ 129s] Scanned files: 26 [ 129s] Infected files: 0 [ 129s] Data scanned: 0.86 MB [ 129s] Data read: 0.22 MB (ratio 3.93:1) [ 129s] Time: 17.307 sec (0 m 17 s) [ 129s] Start Date: 2024:05:28 14:27:25 [ 129s] End Date: 2024:05:28 14:27:42 [ 129s] clamav: negative malware scan result. [ 129s] test passed. [ 129s] ... running 98-revert-uname-hack [ 129s] ... running 99-check-remove-rpms [ 129s] ... removing all built rpms [ 129s] (order: reverse yast2-iscsi-client) [ 130s] [ 130s] RPMLINT report: [ 130s] =============== [ 130s] yast2-iscsi-client.noarch: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.iSCSIClient.desktop xdg-su [ 130s] the .desktop file is for a file not present in the package. You should check [ 130s] the requires or see if this is not a error [ 130s] [ 130s] yast2-iscsi-client.noarch: W: invalid-desktopfile /usr/share/applications/YaST2/org.opensuse.yast.iSCSIClient.desktop file contains key "SuSE-YaST-Keywords" in group "Desktop Entry", but keys extending the format should start with "X-" [ 130s] .desktop file is not valid, check with desktop-file-validate [ 130s] [ 130s] yast2-iscsi-client.noarch: W: standard-dir-owned-by-package /usr/share/icons [ 130s] This package owns a directory that is part of the standard hierarchy, which [ 130s] can lead to default directory permissions or ownerships being changed to [ 130s] something non-standard. [ 130s] [ 130s] 2 packages and 0 specfiles checked; 0 errors, 3 warnings. [ 130s] [ 130s] [ 130s] vm-yast-ci-worker2 finished "build yast2-iscsi-client.spec" at Tue May 28 14:27:43 UTC 2024. [ 130s] /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/SRPMS/yast2-iscsi-client-4.6.2-1.src.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/noarch/yast2-iscsi-client-4.6.2-1.noarch.rpm rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-iscsi-client cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.1.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec At revision 3. /usr/lib/obs/service/format_spec_file --outdir . diff -u package/yast2-iscsi-client.changes <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec rm <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.1.tar.bz2 cp package/yast2-iscsi-client.changes <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client cp package/yast2-iscsi-client.spec <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client cp package/yast2-iscsi-client-4.6.2.tar.bz2 <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client osc -A 'https://api.suse.de/' addremove --- package/yast2-iscsi-client.changes 2024-05-28 14:25:16.826674905 +0000 +++ <https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes 2023-09-20 08:56:44.000000000 +0000 @@ -1,10 +1,4 @@ ------------------------------------------------------------------- -Tue May 28 13:05:18 UTC 2024 - Stefan Hundhammer <shundhammer(a)suse.com> - -- Don't leak passwords to the log (bsc#1225432) -- 4.6.2 - -------------------------------------------------------------------- Tue Sep 19 14:01:12 UTC 2023 - Stefan Hundhammer <shundhammer(a)suse.com> - Add support packages on demand (bsc#1214273) A yast2-iscsi-client-4.6.2.tar.bz2 D yast2-iscsi-client-4.6.1.tar.bz2 submitting package... osc -A https://api.suse.de/ commit -m - Don't leak passwords to the log (bsc#1225432) - 4.6.2 Deleting yast2-iscsi-client-4.6.1.tar.bz2 Sending yast2-iscsi-client.changes Sending yast2-iscsi-client.spec Sending yast2-iscsi-client-4.6.2.tar.bz2 Transmitting file data ... Committed revision 4. rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-iscsi-client New package submitted to Devel:YaST:SLE-15-SP6 cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client-4.6.2.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.changes A Devel:YaST:SLE-15-SP6/yast2-iscsi-client/yast2-iscsi-client.spec At revision 4. osc -A 'https://api.suse.de/' cat 'SUSE:SLE-15-SP6:GA' 'yast2-iscsi-client' 'yast2-iscsi-client.spec' > /tmp/yast-rake20240528-23845-1l77ana osc -A https://api.suse.de/ service wait Devel:YaST:SLE-15-SP6 yast2-iscsi-client Version has been changed in *.spec file Waiting for the server side service... ok yes | osc -A 'https://api.suse.de/' submitreq --no-cleanup 'Devel:YaST:SLE-15-SP6' 'yast2-iscsi-client' 'SUSE:SLE-15-SP6:GA' -m 'submit new version 4.6.2' --yes Server returned an error: HTTP Error 403: Forbidden The target project SUSE:SLE-15-SP6:GA is not accepting requests because: Project is locked. Please use maintenance request for source changes and use osc requestbugownership to set bugowner of a package. rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [yes | osc -A 'https://api.suse.de/' submit...] Tasks: TOP => osc:sr (See full trace by running task with --trace) cleaning Result: PID 23842 exited with value 1 Scanning for a pull request... Found pull request #130 Adding comment ":x: Internal Jenkins [job #4](https://ci.suse.de/job/yast-yast-iscsi-client-SLE-15-SP6/4/) failed" to pull request https://github.com/yast/yast-iscsi-client/pull/130 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-iscsi-client/issues/130/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user shundhammer(a)suse.de

1 1

Build failed in Jenkins: yast-yast-registration-SLE-15-SP6 #4
by jenkins＠suse.de 13 Sep '24

13 Sep '24

See <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/4/display/redirect…> Changes: [mvidner] Ensure add_on_others in autoyast profile are added (bsc#1223301) [mvidner] version + changelog ------------------------------------------ [...truncated 93,54 KiB...] [ 14s] restores the repository setup [ 14s] removes the old NCC credentials [ 14s] [ 14s] Registration::UI::RegistrationUpdateDialog [ 14s] .run [ 14s] updates system registration, base and add-on products [ 14s] [ 14s] Registration::UI::MigrationReposSelectionDialog [ 14s] .run [ 14s] displays the configured repositories and returns the user input [ 14s] configures the selected repositories for distribution upgrade [ 14s] starts the repository manager when the respective button is pressed [ 14s] [ 14s] scc client [ 14s] the system is already registered [ 14s] returns :abort when closing the status dialog [ 14s] [ 14s] Yast::InstSccClient [ 14s] the system is already registered [ 14s] returns :abort when closing the status dialog [ 14s] displays an error when loading the available extensions fails [ 14s] the system is updating reusing old credentials [ 14s] switchs to manual registration when aborting selection of url [ 14s] [ 14s] Registration::RegistrationUI [ 14s] #register_system_and_base_product [ 14s] registers the system using the provided registration code [ 14s] #get_available_addons [ 14s] returns available addons [ 14s] #update_system [ 14s] updates the system registration with the new target distro [ 14s] resets registration credentials and registration url in case of failure [ 14s] #update_base_product [ 14s] updates the base product registration [ 14s] resets registration credentials in case of failure [ 14s] #register_addons [ 14s] disables update repositories if requested [ 14s] when the addons are free [ 14s] does not ask for reg. code if all addons are free [ 14s] returns :next if everything goes fine [ 14s] returns :back if some registration failed [ 14s] when the addons need reg. code [ 14s] returns :next if everything goes fine [ 14s] keep asking for a reg. code if some reg. code failed [ 14s] #try_register_addons [ 14s] for a non-free product without a known regcode [ 14s] uses the base product regcode [ 14s] #migration_products [ 14s] returns migration products from the server with UI feedback [ 14s] #downgrade_product [ 14s] displays UI feedback and downgrades the product [ 14s] #synchronize_products [ 14s] displays UI feedback and synchronizes the products [ 14s] registered_addons_to_rollback [ 14s] returns an empty array in case of not 'registered but not installed' addons [ 14s] returns an empty array if the user doesn't want to rollback the obtained addons [ 14s] returns an array with all the registered but not installed addons if user accepts [ 14s] [ 14s] Registration::UI::ImportCertificateDialog [ 14s] .run [ 14s] displays the certificate details and returns the user input [ 14s] [ 14s] Finished in 1.59 seconds (files took 1.42 seconds to load) [ 14s] 672 examples, 0 failures [ 14s] [ 14s] + exit 0 [ 14s] Processing files: yast2-registration-4.6.2-1.noarch [ 14s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YHcR3J [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd yast2-registration-4.6.2 [ 14s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/yast2-registration-4.6.2-1.x86_64/usr/share/licenses/yast2-registration [ 14s] + export LC_ALL=C [ 14s] + LC_ALL=C [ 14s] + export LICENSEDIR [ 14s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/yast2-registration-4.6.2-1.x86_64/usr/share/licenses/yast2-registration [ 14s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/yast2-registration-4.6.2-1.x86_64/usr/share/licenses/yast2-registration [ 14s] + exit 0 [ 14s] Provides: application() application(YaST2/org.opensuse.yast.SCC.AddExtensions.desktop) application(YaST2/org.opensuse.yast.SCC.desktop) metainfo() metainfo(org.opensuse.yast.SCC.AddExtensions.metainfo.xml) metainfo(org.opensuse.yast.SCC.metainfo.xml) yast2-registration = 4.6.2-1 [ 14s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 14s] Requires: /bin/sh /usr/bin/env [ 14s] Conflicts: autoyast2 < 4.3.23 [ 14s] Supplements: autoyast(suse_register) [ 14s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/yast2-registration-4.6.2-1.x86_64 [ 14s] Wrote: /home/abuild/rpmbuild/SRPMS/yast2-registration-4.6.2-1.src.rpm [ 14s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/yast2-registration-4.6.2-1.noarch.rpm [ 14s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.IqwzDF [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd yast2-registration-4.6.2 [ 14s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/yast2-registration-4.6.2-1.x86_64 [ 14s] + exit 0 [ 14s] ... checking for files with abuild user/group [ 14s] ... running 00-check-install-rpms [ 14s] ... installing all built rpms [ 14s] Preparing packages... [ 14s] yast2-registration-4.6.2-1.noarch [ 15s] ... running 50-check-binary-kernel-log [ 15s] ... running 50-check-core-files [ 15s] ... running 50-check-debuginfo [ 15s] ... testing for empty debuginfo packages [ 15s] ... running 50-check-filelist [ 15s] ... checking filelist [ 15s] ... running 50-check-gconf-scriptlets [ 15s] ... testing GConf scriptlet presence [ 15s] ... running 50-check-installtest [ 15s] ... testing for pre/postinstall scripts that are not idempotent [ 15s] ... running 50-check-invalid-provides [ 15s] ... running 50-check-invalid-requires [ 15s] ... running 50-check-kernel-build-id [ 15s] ... running 50-check-lanana [ 15s] ... running 50-check-libtool-deps [ 15s] ... testing devel dependencies required by libtool .la files [ 15s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 15s] ... running 50-check-packaged-twice [ 15s] ... running 50-check-permissions [ 15s] ... testing for modified permissions [ 15s] ... running 72-translate-appdata [ 15s] ... running 80-check-malware-scan-clamav [ 16s] unpacking /.build.packages/SRPMS/yast2-registration-4.6.2-1.src.rpm [ 16s] unpacking /.build.packages/RPMS/noarch/yast2-registration-4.6.2-1.noarch.rpm [ 16s] clamscan -ir /usr/src/packages/BUILD/scan: [ 16s] LibClamAV Warning: ************************************************** [ 16s] LibClamAV Warning: *** The virus database is older than 7 days! *** [ 16s] LibClamAV Warning: *** Please update it as soon as possible. *** [ 16s] LibClamAV Warning: ************************************************** [ 34s] [ 34s] ----------- SCAN SUMMARY ----------- [ 34s] Known viruses: 8691864 [ 34s] Engine version: 0.103.11 [ 34s] Scanned directories: 36 [ 34s] Scanned files: 97 [ 34s] Infected files: 0 [ 34s] Data scanned: 2.93 MB [ 34s] Data read: 0.52 MB (ratio 5.68:1) [ 34s] Time: 18.025 sec (0 m 18 s) [ 34s] Start Date: 2024:05:30 14:29:45 [ 34s] End Date: 2024:05:30 14:30:03 [ 34s] clamav: negative malware scan result. [ 34s] test passed. [ 34s] ... running 98-revert-uname-hack [ 34s] ... running 99-check-remove-rpms [ 34s] ... removing all built rpms [ 34s] (order: reverse yast2-registration) [ 34s] [ 34s] RPMLINT report: [ 34s] =============== [ 34s] yast2-registration.noarch: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.SCC.AddExtensions.desktop /usr/bin/xdg-su [ 34s] yast2-registration.noarch: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.SCC.desktop /usr/bin/xdg-su [ 34s] the .desktop file is for a file not present in the package. You should check [ 34s] the requires or see if this is not a error [ 34s] [ 34s] yast2-registration.noarch: W: standard-dir-owned-by-package /usr/share/icons [ 34s] This package owns a directory that is part of the standard hierarchy, which [ 34s] can lead to default directory permissions or ownerships being changed to [ 34s] something non-standard. [ 34s] [ 34s] yast2-registration.noarch: E: env-script-interpreter (Badness: 9) /usr/lib/YaST2/bin/install_ssl_certificates /usr/bin/env ruby [ 34s] This script uses 'env' as an interpreter. For the rpm runtime dependency [ 34s] detection to work, the shebang #!/usr/bin/env python needs to be patched into [ 34s] #!/usr/bin/python otherwise the package dependency generator merely adds a [ 34s] dependency on /usr/bin/env rather than the actual interpreter /usr/bin/python. [ 34s] Alternatively, if the file should not be executed, then ensure that it is not [ 34s] marked as executable or don't install it in a path that is reserved for [ 34s] executables. [ 34s] [ 34s] 2 packages and 0 specfiles checked; 1 errors, 3 warnings. [ 34s] [ 34s] [ 34s] vm-yast-ci-worker2 finished "build yast2-registration.spec" at Thu May 30 14:30:03 UTC 2024. [ 34s] /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/SRPMS/yast2-registration-4.6.2-1.src.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/noarch/yast2-registration-4.6.2-1.noarch.rpm rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-registration cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-registration A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration-4.6.1.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration.changes A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration.spec At revision 3. /usr/lib/obs/service/format_spec_file --outdir . diff -u package/yast2-registration.spec <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration/yast2-registration.spec rm <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration/yast2-registration-4.6.1.tar.bz2 rm <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration/yast2-registration.spec rm <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration/yast2-registration.changes cp package/yast2-registration.spec <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration cp package/yast2-registration-4.6.2.tar.bz2 <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration cp package/yast2-registration.changes <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration osc -A 'https://api.suse.de/' addremove --- package/yast2-registration.spec 2024-05-30 14:30:04.729710480 +0000 +++ <https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-registration/yast2-registration.spec 2024-03-13 16:20:30.000000000 +0000 @@ -17,7 +17,7 @@ Name: yast2-registration -Version: 4.6.2 +Version: 4.6.1 Release: 0 Summary: YaST2 - Registration Module License: GPL-2.0-only D yast2-registration-4.6.1.tar.bz2 A yast2-registration-4.6.2.tar.bz2 submitting package... osc -A https://api.suse.de/ commit -m - Ensure add_on_others in autoyast profile are added (bsc#1223301) - 4.6.2 Deleting yast2-registration-4.6.1.tar.bz2 Sending yast2-registration.changes Sending yast2-registration.spec Sending yast2-registration-4.6.2.tar.bz2 Transmitting file data ... Committed revision 4. rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-registration New package submitted to Devel:YaST:SLE-15-SP6 cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-registration A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration-4.6.2.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration.changes A Devel:YaST:SLE-15-SP6/yast2-registration/yast2-registration.spec At revision 4. osc -A 'https://api.suse.de/' cat 'SUSE:SLE-15-SP6:GA' 'yast2-registration' 'yast2-registration.spec' > /tmp/yast-rake20240530-22969-1eh4bxf osc -A https://api.suse.de/ service wait Devel:YaST:SLE-15-SP6 yast2-registration Version has been changed in *.spec file Waiting for the server side service... ok yes | osc -A 'https://api.suse.de/' submitreq --no-cleanup 'Devel:YaST:SLE-15-SP6' 'yast2-registration' 'SUSE:SLE-15-SP6:GA' -m 'submit new version 4.6.2' --yes Server returned an error: HTTP Error 403: Forbidden The target project SUSE:SLE-15-SP6:GA is not accepting requests because: Project is locked. Please use maintenance request for source changes and use osc requestbugownership to set bugowner of a package. rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [yes | osc -A 'https://api.suse.de/' submit...] Tasks: TOP => osc:sr (See full trace by running task with --trace) cleaning Result: PID 22966 exited with value 1 Scanning for a pull request... Found pull request #601 Adding comment ":x: Internal Jenkins [job #4](https://ci.suse.de/job/yast-yast-registration-SLE-15-SP6/4/) failed" to pull request https://github.com/yast/yast-registration/pull/601 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-registration/issues/601/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user mvidner(a)suse.cz

1 1

Build failed in Jenkins: yast-yast-country-SLE-15-SP6 #6
by jenkins＠suse.de 13 Sep '24

13 Sep '24

See <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/6/display/redirect?page…> Changes: [dzejrou] Rename Europe/Kiev to Europe/Kyiv to align with timezone 2022b onwards [lslezak] CI fix: install the "kdb" package, it is needed for the unit tests ------------------------------------------ [...truncated 111,58 KiB...] [ 98s] reads utf8 settings during runtime [ 98s] #MakeProposal [ 98s] returns array of string with proposal text [ 98s] force_reset is set to true [ 98s] sets default language [ 98s] language changed is set to true [ 98s] forces read of languages map [ 98s] [ 98s] Y2Country::Widgets::LanguageSelection [ 98s] enlists all available languages [ 98s] these methods are only tested if they exist [ 98s] #label [ 98s] produces a String [ 98s] #help [ 98s] produces a String [ 98s] #opt [ 98s] produces Symbols [ 98s] #handle [ 98s] produces a Symbol or nil [ 98s] #validate [ 98s] produces a Boolean (or nil) [ 98s] #items [ 98s] produces an array of pairs of strings [ 98s] #handle [ 98s] when language remains unchanged [ 98s] returns nil [ 98s] when language has been changed [ 98s] sets the new language [ 98s] resets the timezones map [ 98s] when emit_event is set to true and Yast::Mode is not config [ 98s] returns :redraw [ 98s] language needed to be switched to English [ 98s] switch language to english [ 98s] language does not need to be switched to English [ 98s] sets console font according to language [ 98s] sets WFM language according to selected language [ 98s] selected langauge is nn_NO [ 98s] it sets WFM language to nb_NO instead [ 98s] #store [ 98s] calls #handle method [ 98s] when emit_event is set to false and Yast::Mode is not config [ 98s] language needed to be switched to English [ 98s] switch language to english [ 98s] language does not need to be switched to English [ 98s] sets console font according to language [ 98s] sets WFM language according to selected language [ 98s] selected langauge is nn_NO [ 98s] it sets WFM language to nb_NO instead [ 98s] [ 98s] Finished in 0.99445 seconds (files took 0.38921 seconds to load) [ 98s] 272 examples, 0 failures [ 98s] [ 98s] + exit 0 [ 98s] Processing files: yast2-country-4.6.7-1.x86_64 [ 98s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.aKBC0P [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd yast2-country-4.6.7 [ 98s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/yast2-country-4.6.7-1.x86_64/usr/share/licenses/yast2-country [ 98s] + export LC_ALL=C [ 98s] + LC_ALL=C [ 98s] + export LICENSEDIR [ 98s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/yast2-country-4.6.7-1.x86_64/usr/share/licenses/yast2-country [ 98s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/yast2-country-4.6.7-1.x86_64/usr/share/licenses/yast2-country [ 98s] + exit 0 [ 98s] Provides: application() application(YaST2/org.opensuse.yast.Keyboard.desktop) application(YaST2/org.opensuse.yast.Language.desktop) application(YaST2/org.opensuse.yast.Timezone.desktop) metainfo() metainfo(org.opensuse.yast.Keyboard.metainfo.xml) metainfo(org.opensuse.yast.Language.metainfo.xml) metainfo(org.opensuse.yast.Timezone.metainfo.xml) perl(YaPI::LANGUAGE) = 1.0.0 perl(YaPI::TIME) = 1.0.0 yast2-country = 4.6.7-1 yast2-country(x86-64) = 4.6.7-1 [ 98s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 98s] Conflicts: yast2-ntp-client < 4.2.8 [ 98s] Supplements: autoyast(language:keyboard:timezone) [ 98s] Processing files: yast2-country-data-4.6.7-1.x86_64 [ 98s] Provides: yast2-country-data = 4.6.7-1 yast2-country-data(x86-64) = 4.6.7-1 [ 98s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 98s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/yast2-country-4.6.7-1.x86_64 [ 98s] Wrote: /home/abuild/rpmbuild/SRPMS/yast2-country-4.6.7-1.src.rpm [ 98s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/yast2-country-4.6.7-1.x86_64.rpm [ 98s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/yast2-country-data-4.6.7-1.x86_64.rpm [ 98s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.YXHFwv [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd yast2-country-4.6.7 [ 98s] + /usr/bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/yast2-country-4.6.7-1.x86_64 [ 99s] + exit 0 [ 99s] ... checking for files with abuild user/group [ 99s] ... running 00-check-install-rpms [ 99s] ... installing all built rpms [ 99s] Preparing packages... [ 99s] yast2-country-data-4.6.7-1.x86_64 [ 99s] yast2-country-4.6.7-1.x86_64 [ 99s] ... running 50-check-binary-kernel-log [ 99s] ... running 50-check-core-files [ 99s] ... running 50-check-debuginfo [ 99s] ... testing for empty debuginfo packages [ 99s] ... running 50-check-filelist [ 99s] ... checking filelist [ 99s] ... running 50-check-gconf-scriptlets [ 99s] ... testing GConf scriptlet presence [ 99s] ... running 50-check-installtest [ 99s] ... testing for pre/postinstall scripts that are not idempotent [ 100s] ... running 50-check-invalid-provides [ 100s] ... running 50-check-invalid-requires [ 100s] ... running 50-check-kernel-build-id [ 100s] ... running 50-check-lanana [ 100s] ... running 50-check-libtool-deps [ 100s] ... testing devel dependencies required by libtool .la files [ 100s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 100s] ... running 50-check-packaged-twice [ 100s] ... running 50-check-permissions [ 100s] ... testing for modified permissions [ 100s] ... running 72-translate-appdata [ 100s] ... running 80-check-malware-scan-clamav [ 100s] unpacking /.build.packages/SRPMS/yast2-country-4.6.7-1.src.rpm [ 100s] unpacking /.build.packages/RPMS/x86_64/yast2-country-data-4.6.7-1.x86_64.rpm [ 100s] unpacking /.build.packages/RPMS/x86_64/yast2-country-4.6.7-1.x86_64.rpm [ 100s] clamscan -ir /usr/src/packages/BUILD/scan: [ 100s] LibClamAV Warning: ************************************************** [ 100s] LibClamAV Warning: *** The virus database is older than 7 days! *** [ 100s] LibClamAV Warning: *** Please update it as soon as possible. *** [ 100s] LibClamAV Warning: ************************************************** [ 118s] [ 118s] ----------- SCAN SUMMARY ----------- [ 118s] Known viruses: 8691864 [ 118s] Engine version: 0.103.11 [ 118s] Scanned directories: 47 [ 118s] Scanned files: 123 [ 118s] Infected files: 0 [ 118s] Data scanned: 1.71 MB [ 118s] Data read: 0.39 MB (ratio 4.39:1) [ 118s] Time: 17.591 sec (0 m 17 s) [ 118s] Start Date: 2024:06:06 08:21:13 [ 118s] End Date: 2024:06:06 08:21:31 [ 118s] clamav: negative malware scan result. [ 118s] test passed. [ 118s] ... running 98-revert-uname-hack [ 118s] ... running 99-check-remove-rpms [ 118s] ... removing all built rpms [ 118s] (order: reverse yast2-country-data yast2-country) [ 119s] [ 119s] RPMLINT report: [ 119s] =============== [ 120s] yast2-country.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.Keyboard.desktop xdg-su [ 120s] yast2-country.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.Language.desktop xdg-su [ 120s] yast2-country.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/org.opensuse.yast.Timezone.desktop xdg-su [ 120s] the .desktop file is for a file not present in the package. You should check [ 120s] the requires or see if this is not a error [ 120s] [ 120s] yast2-country.x86_64: W: no-binary [ 120s] The package should be of the noarch architecture because it doesn't contain [ 120s] any binaries. [ 120s] [ 120s] yast2-country.x86_64: W: standard-dir-owned-by-package /usr/share/icons [ 120s] This package owns a directory that is part of the standard hierarchy, which [ 120s] can lead to default directory permissions or ownerships being changed to [ 120s] something non-standard. [ 120s] [ 120s] 3 packages and 0 specfiles checked; 0 errors, 5 warnings. [ 120s] [ 120s] [ 120s] vm-yast-ci-worker2 finished "build yast2-country.spec" at Thu Jun 6 08:21:33 UTC 2024. [ 120s] /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/SRPMS/yast2-country-4.6.7-1.src.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/x86_64/yast2-country-data-4.6.7-1.x86_64.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/x86_64/yast2-country-4.6.7-1.x86_64.rpm rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-country cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-country A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country-4.6.6.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country.changes A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country.spec At revision 5. /usr/lib/obs/service/format_spec_file --outdir . diff -u package/yast2-country.spec <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country/yast2-country.spec rm <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country/yast2-country.spec rm <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country/yast2-country.changes rm <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country/yast2-country-4.6.6.tar.bz2 cp package/yast2-country.spec <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country cp package/yast2-country.changes <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country cp package/yast2-country-4.6.7.tar.bz2 <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country osc -A 'https://api.suse.de/' addremove --- package/yast2-country.spec 2024-06-06 08:21:33.867531450 +0000 +++ <https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/yast2-country/yast2-country.spec 2023-10-25 14:31:07.000000000 +0000 @@ -1,7 +1,7 @@ # # spec file for package yast2-country # -# Copyright (c) 2024 SUSE LLC +# Copyright (c) 2023 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: yast2-country -Version: 4.6.7 +Version: 4.6.6 Release: 0 Summary: YaST2 - Country Settings (Language, Keyboard, and Timezone) License: GPL-2.0-only D yast2-country-4.6.6.tar.bz2 A yast2-country-4.6.7.tar.bz2 submitting package... osc -A https://api.suse.de/ commit -m - Rename Europe/Kiev to Europe/Kyiv as per 2022b release of tz code and data by ICANN (bsc#1224387) - 4.6.7 Deleting yast2-country-4.6.6.tar.bz2 Sending yast2-country.changes Sending yast2-country.spec Sending yast2-country-4.6.7.tar.bz2 Transmitting file data ... Committed revision 6. rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' yast2-country New package submitted to Devel:YaST:SLE-15-SP6 cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/yast2-country A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country-4.6.7.tar.bz2 A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country.changes A Devel:YaST:SLE-15-SP6/yast2-country/yast2-country.spec At revision 6. osc -A 'https://api.suse.de/' cat 'SUSE:SLE-15-SP6:GA' 'yast2-country' 'yast2-country.spec' > /tmp/yast-rake20240606-20694-1mb9eys osc -A https://api.suse.de/ service wait Devel:YaST:SLE-15-SP6 yast2-country Version has been changed in *.spec file Waiting for the server side service... ok yes | osc -A 'https://api.suse.de/' submitreq --no-cleanup 'Devel:YaST:SLE-15-SP6' 'yast2-country' 'SUSE:SLE-15-SP6:GA' -m 'submit new version 4.6.7' --yes Server returned an error: HTTP Error 403: Forbidden The target project SUSE:SLE-15-SP6:GA is not accepting requests because: Project is locked. Please use maintenance request for source changes and use osc requestbugownership to set bugowner of a package. rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [yes | osc -A 'https://api.suse.de/' submit...] Tasks: TOP => osc:sr (See full trace by running task with --trace) cleaning Result: PID 20691 exited with value 1 Scanning for a pull request... Found pull request #325 Adding comment ":x: Internal Jenkins [job #6](https://ci.suse.de/job/yast-yast-country-SLE-15-SP6/6/) failed" to pull request https://github.com/yast/yast-country/pull/325 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-country/issues/325/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user dzejrou(a)gmail.com Not sending mail to unregistered user lslezak(a)suse.cz

1 1

Build failed in Jenkins: yast-yast-users-SLE-15-SP6 #3
by jenkins＠suse.de 13 Sep '24

13 Sep '24

See <https://ci.suse.de/job/yast-yast-users-SLE-15-SP6/3/display/redirect> Changes: ------------------------------------------ [...truncated 74,51 KiB...] [ 39s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/agent-crack' [ 39s] make[2]: Nothing to be done for 'check-am'. [ 39s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/agent-crack' [ 39s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/agent-crack' [ 39s] Making check in src [ 39s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/src' [ 39s] make[1]: Nothing to be done for 'check'. [ 39s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/src' [ 39s] Making check in test [ 39s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 39s] /usr/bin/make check-TESTS [ 39s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 39s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 40s] PASS: lib/y2users/config_merger_test.rb [ 40s] PASS: lib/y2users/config_manager_test.rb [ 41s] PASS: lib/y2users/config_test.rb [ 41s] PASS: lib/y2users/login_config_test.rb [ 41s] PASS: lib/y2users/username_test.rb [ 42s] PASS: lib/y2users/user_test.rb [ 42s] PASS: lib/y2users/user_validator_test.rb [ 42s] PASS: lib/y2users/group_test.rb [ 43s] PASS: lib/y2users/password_test.rb [ 43s] PASS: lib/y2users/password_validator_test.rb [ 44s] PASS: lib/y2users/collision_checker_test.rb [ 44s] PASS: lib/y2users/shadow_date_test.rb [ 44s] PASS: lib/y2users/validation_config_test.rb [ 44s] PASS: lib/y2users/help_texts_test.rb [ 45s] PASS: lib/y2users/config_element_examples.rb [ 45s] PASS: lib/y2users/config_element_collection_examples.rb [ 46s] PASS: lib/y2users/useradd_config_test.rb [ 46s] PASS: lib/y2users/users_collection_test.rb [ 47s] PASS: lib/y2users/password_helper_test.rb [ 47s] PASS: lib/y2users/groups_collection_test.rb [ 48s] PASS: lib/y2users/clients/inst_user_first_test.rb [ 48s] PASS: lib/y2users/clients/inst_root_first_test.rb [ 49s] PASS: lib/y2users/linux/base_reader_test.rb [ 49s] PASS: lib/y2users/linux/create_user_action_test.rb [ 50s] PASS: lib/y2users/linux/delete_user_action_test.rb [ 50s] PASS: lib/y2users/linux/delete_user_password_action_test.rb [ 50s] PASS: lib/y2users/linux/groups_writer_test.rb [ 50s] PASS: lib/y2users/linux/edit_user_action_test.rb [ 51s] PASS: lib/y2users/linux/local_reader_test.rb [ 51s] PASS: lib/y2users/linux/login_config_writer_test.rb [ 52s] PASS: lib/y2users/linux/reader_test.rb [ 52s] PASS: lib/y2users/linux/remove_home_content_action_test.rb [ 53s] PASS: lib/y2users/linux/set_auth_keys_action_test.rb [ 53s] PASS: lib/y2users/linux/set_home_ownership_action_test.rb [ 54s] PASS: lib/y2users/linux/delete_group_action_test.rb [ 54s] PASS: lib/y2users/linux/set_user_password_action_test.rb [ 54s] PASS: lib/y2users/linux/create_group_action_test.rb [ 54s] PASS: lib/y2users/linux/edit_group_action_test.rb [ 55s] PASS: lib/y2users/linux/useradd_config_writer_test.rb [ 56s] PASS: lib/y2users/linux/users_writer_test.rb [ 56s] PASS: lib/y2users/linux/writer_test.rb [ 56s] PASS: lib/y2users/home_test.rb [ 56s] PASS: lib/y2users/user_commit_config_test.rb [ 56s] PASS: lib/y2users/user_commit_config_collection_test.rb [ 57s] PASS: lib/y2users/users_module/commit_config_reader_test.rb [ 57s] PASS: lib/y2users/users_module/reader_test.rb [ 58s] PASS: lib/y2users/autoinst/config_merger_test.rb [ 58s] PASS: lib/y2users/autoinst/reader_test.rb [ 59s] PASS: lib/y2users/autoinst_profile/group_section_test.rb [ 59s] PASS: lib/y2users/autoinst_profile/groups_section_test.rb [ 59s] PASS: lib/y2users/autoinst_profile/login_settings_section_test.rb [ 59s] PASS: lib/y2users/autoinst_profile/password_settings_section_test.rb [ 59s] PASS: lib/y2users/autoinst_profile/user_defaults_section_test.rb [ 60s] PASS: lib/y2users/autoinst_profile/user_section_test.rb [ 60s] PASS: lib/y2users/autoinst_profile/users_section_test.rb [ 60s] PASS: lib/users/ca_password_validator_test.rb [ 60s] PASS: lib/users/encryption_method_test.rb [ 61s] PASS: lib/users/ssh_authorized_keys_file_test.rb [ 61s] PASS: lib/users/leaf_blk_device_test.rb [ 61s] PASS: lib/users/users_database_test.rb [ 62s] PASS: lib/users/ssh_public_key_test.rb [ 63s] PASS: lib/users/clients/users_finish_test.rb [ 63s] FAIL: lib/users/clients/auto_test.rb [ 64s] PASS: lib/users/dialogs/inst_root_first_test.rb [ 65s] PASS: lib/users/dialogs/inst_user_first_test.rb [ 65s] PASS: lib/users/widgets/inst_root_first_test.rb [ 66s] PASS: lib/users/widgets/public_key_selector_test.rb [ 66s] PASS: dialogs_test.rb [ 66s] PASS: ssh_authorized_keys_test.rb [ 67s] PASS: users_simple_test.rb [ 68s] PASS: widgets_test.rb [ 81s] PASS: users_test.rb [ 81s] ============================================ [ 81s] yast2-users 4.6.4: test/test-suite.log [ 81s] ============================================ [ 81s] [ 81s] # TOTAL: 73 [ 81s] # PASS: 72 [ 81s] # SKIP: 0 [ 81s] # XFAIL: 0 [ 81s] # FAIL: 1 [ 81s] # XPASS: 0 [ 81s] # ERROR: 0 [ 81s] [ 81s] .. contents:: :depth: 2 [ 81s] [ 81s] FAIL: lib/users/clients/auto_test [ 81s] ================================= [ 81s] [ 81s] WARNING: Nokogiri was built against LibXML version 2.9.14, but has dynamically loaded 2.10.3 [ 81s] F.......FFFFFFFFFF [ 81s] [ 81s] Failures: [ 81s] [ 81s] 1) Y2Users::Clients::Auto#run Import when double users have been given in the profile report error [ 81s] Failure/Error: expect(subject.run).to eq(true) [ 81s] [ 81s] NoMethodError: [ 81s] undefined method `Import' for Yast::Users:Module [ 81s] # /home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/src/lib/users/clients/auto.rb:67:in `import' [ 81s] # /usr/share/YaST2/lib/installation/auto_client.rb:62:in `run' [ 81s] # ./lib/users/clients/auto_test.rb:42:in `block (5 levels) in <top (required)>' [ 81s] [ 81s] 2) Y2Users::Clients::Auto#run Summary returns the users summary [ 81s] Failure/Error: allow(Yast::Users).to receive(:Summary).and_return("summary") [ 81s] Yast::Users does not implement: Summary [ 81s] # ./lib/users/clients/auto_test.rb:143:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 3) Y2Users::Clients::Auto#run Export exports all users and groups [ 81s] Failure/Error: [ 81s] allow(Yast::Users).to receive(:Export).with("default") [ 81s] .and_return(all_users) [ 81s] [ 81s] Yast::Users does not implement: Export [ 81s] # ./lib/users/clients/auto_test.rb:160:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 4) Y2Users::Clients::Auto#run Export when 'compact' export is wanted it exports only local users and groups [ 81s] Failure/Error: [ 81s] allow(Yast::Users).to receive(:Export).with("default") [ 81s] .and_return(all_users) [ 81s] [ 81s] Yast::Users does not implement: Export [ 81s] # ./lib/users/clients/auto_test.rb:160:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 5) Y2Users::Clients::Auto#run Modified returns whether the data in Users module has been modified [ 81s] Failure/Error: allow(Yast::Users).to receive(:Modified).and_return(true) [ 81s] Yast::Users does not implement: Modified [ 81s] # ./lib/users/clients/auto_test.rb:183:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 6) Y2Users::Clients::Auto#run SetModified sets the Users module as modified [ 81s] Failure/Error: expect(Yast::Users).to receive(:SetModified).with(true) [ 81s] Yast::Users does not implement: SetModified [ 81s] # ./lib/users/clients/auto_test.rb:195:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 7) Y2Users::Clients::Auto#run Reset removes the configuration object [ 81s] Failure/Error: expect(Yast::Users).to receive(:Import).with({}) [ 81s] Yast::Users does not implement: Import [ 81s] # ./lib/users/clients/auto_test.rb:206:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 8) Y2Users::Clients::Auto#run Write writes the users defined in the Users module [ 81s] Failure/Error: allow(Y2Users::UsersModule::Reader).to receive(:new).and_return(reader) [ 81s] [ 81s] NameError: [ 81s] uninitialized constant Y2Users::UsersModule [ 81s] Did you mean? Y2Users::UsersCollection [ 81s] # ./lib/users/clients/auto_test.rb:238:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 9) Y2Users::Clients::Auto#run Write writes the groups defined in the Users module [ 81s] Failure/Error: allow(Y2Users::UsersModule::Reader).to receive(:new).and_return(reader) [ 81s] [ 81s] NameError: [ 81s] uninitialized constant Y2Users::UsersModule [ 81s] Did you mean? Y2Users::UsersCollection [ 81s] # ./lib/users/clients/auto_test.rb:238:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 10) Y2Users::Clients::Auto#run Write when there are not issues returns true [ 81s] Failure/Error: allow(Y2Users::UsersModule::Reader).to receive(:new).and_return(reader) [ 81s] [ 81s] NameError: [ 81s] uninitialized constant Y2Users::UsersModule [ 81s] Did you mean? Y2Users::UsersCollection [ 81s] # ./lib/users/clients/auto_test.rb:238:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] 11) Y2Users::Clients::Auto#run Write when any issue was found returns false [ 81s] Failure/Error: allow(Y2Users::UsersModule::Reader).to receive(:new).and_return(reader) [ 81s] [ 81s] NameError: [ 81s] uninitialized constant Y2Users::UsersModule [ 81s] Did you mean? Y2Users::UsersCollection [ 81s] # ./lib/users/clients/auto_test.rb:238:in `block (4 levels) in <top (required)>' [ 81s] [ 81s] Finished in 0.82101 seconds (files took 0.90924 seconds to load) [ 81s] 18 examples, 11 failures [ 81s] [ 81s] Failed examples: [ 81s] [ 81s] rspec ./lib/users/clients/auto_test.rb:36 # Y2Users::Clients::Auto#run Import when double users have been given in the profile report error [ 81s] rspec ./lib/users/clients/auto_test.rb:146 # Y2Users::Clients::Auto#run Summary returns the users summary [ 81s] rspec ./lib/users/clients/auto_test.rb:166 # Y2Users::Clients::Auto#run Export exports all users and groups [ 81s] rspec ./lib/users/clients/auto_test.rb:173 # Y2Users::Clients::Auto#run Export when 'compact' export is wanted it exports only local users and groups [ 81s] rspec ./lib/users/clients/auto_test.rb:186 # Y2Users::Clients::Auto#run Modified returns whether the data in Users module has been modified [ 81s] rspec ./lib/users/clients/auto_test.rb:194 # Y2Users::Clients::Auto#run SetModified sets the Users module as modified [ 81s] rspec ./lib/users/clients/auto_test.rb:203 # Y2Users::Clients::Auto#run Reset removes the configuration object [ 81s] rspec ./lib/users/clients/auto_test.rb:249 # Y2Users::Clients::Auto#run Write writes the users defined in the Users module [ 81s] rspec ./lib/users/clients/auto_test.rb:259 # Y2Users::Clients::Auto#run Write writes the groups defined in the Users module [ 81s] rspec ./lib/users/clients/auto_test.rb:270 # Y2Users::Clients::Auto#run Write when there are not issues returns true [ 81s] rspec ./lib/users/clients/auto_test.rb:280 # Y2Users::Clients::Auto#run Write when any issue was found returns false [ 81s] [ 81s] FAIL lib/users/clients/auto_test.rb (exit status: 1) [ 81s] [ 81s] ============================================================================ [ 81s] Testsuite summary for yast2-users 4.6.4 [ 81s] ============================================================================ [ 81s] # TOTAL: 73 [ 81s] # PASS: 72 [ 81s] # SKIP: 0 [ 81s] # XFAIL: 0 [ 81s] # FAIL: 1 [ 81s] # XPASS: 0 [ 81s] # ERROR: 0 [ 81s] ============================================================================ [ 81s] See test/test-suite.log [ 81s] Please report to http://bugs.opensuse.org/ [ 81s] ============================================================================ [ 81s] make[3]: *** [Makefile:627: test-suite.log] Error 1 [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 81s] make[2]: *** [Makefile:735: check-TESTS] Error 2 [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 81s] make[1]: *** [Makefile:798: check-am] Error 2 [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/yast2-users-4.6.4/test' [ 81s] make: *** [Makefile:547: check-recursive] Error 1 [ 81s] error: Bad exit status from /var/tmp/rpm-tmp.P1Vi9V (%install) [ 81s] [ 81s] [ 81s] RPM build errors: [ 81s] Bad exit status from /var/tmp/rpm-tmp.P1Vi9V (%install) [ 81s] [ 81s] vm-yast-ci-worker2 failed "build yast2-users.spec" at Wed Feb 14 12:13:30 UTC 2024. [ 81s] The buildroot was: /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64 rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [echo -e 'y\ny\ny\n' | osc -A 'https://api....] Tasks: TOP => osc:sr => osc:commit => osc:build (See full trace by running task with --trace) cleaning Result: PID 26929 exited with value 1 Scanning for a pull request... Found pull request #390 Adding comment ":x: Internal Jenkins [job #3](https://ci.suse.de/job/yast-yast-users-SLE-15-SP6/3/) failed" to pull request https://github.com/yast/yast-users/pull/390 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-users/issues/390/comments... OK Success Build step 'Execute shell' marked build as failure

1 3

Build failed in Jenkins: yast-sap-installation-wizard-SLE-15-SP6 #10
by jenkins＠suse.de 11 Sep '24

11 Sep '24

See <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/10/display/r…> Changes: [varkoly] Fix xml syntax error. [varkoly] New version. [varkoly] New version [varkoly] Fix version ------------------------------------------ [...truncated 87,99 KiB...] [ 104s] + cp -pr src/docs/hana-autoyast.xml /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/sap-installation-wizard [ 104s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/sap-installation-wizard [ 104s] + cp -pr README.md /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/sap-installation-wizard [ 104s] + exit 0 [ 104s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.DW2iIc [ 104s] + umask 022 [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + cd sap-installation-wizard-4.6.15 [ 104s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/sap-installation-wizard [ 104s] + export LC_ALL=C [ 104s] + LC_ALL=C [ 104s] + export LICENSEDIR [ 104s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/sap-installation-wizard [ 104s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/sap-installation-wizard [ 104s] + exit 0 [ 105s] Provides: application() application(YaST2/firstboot_inst_sap.desktop) application(YaST2/sap-installation-wizard.desktop) application(YaST2/sap-windows_cheat_sheet.desktop) sap-installation-wizard = 4.6.15-1 sap-installation-wizard(x86-64) = 4.6.15-1 sap-media-changer = 4.6.15 [ 105s] Requires(interp): /bin/sh /bin/sh /bin/sh [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires(pre): /bin/mkdir coreutils diffutils fillup grep yast2 [ 105s] Requires(post): /bin/sh [ 105s] Requires(preun): /bin/mkdir /bin/sh coreutils diffutils fillup grep yast2 [ 105s] Requires(postun): /bin/sh [ 105s] Requires: /bin/bash [ 105s] Conflicts: bone-installation-wizard [ 105s] Obsoletes: sap-media-changer <= 2.17 [ 105s] Processing files: bone-installation-wizard-4.6.15-1.x86_64 [ 105s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.sOKNq3 [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd sap-installation-wizard-4.6.15 [ 105s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/bone-installation-wizard [ 105s] + export LC_ALL=C [ 105s] + LC_ALL=C [ 105s] + export DOCDIR [ 105s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/bone-installation-wizard [ 105s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/bone-installation-wizard [ 105s] + cp -pr README.md /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/doc/packages/bone-installation-wizard [ 105s] + exit 0 [ 105s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.XvURHz [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd sap-installation-wizard-4.6.15 [ 105s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/bone-installation-wizard [ 105s] + export LC_ALL=C [ 105s] + LC_ALL=C [ 105s] + export LICENSEDIR [ 105s] + /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/bone-installation-wizard [ 105s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64/usr/share/licenses/bone-installation-wizard [ 105s] + exit 0 [ 105s] Provides: application() application(YaST2/firstboot_inst_sap.desktop) application(YaST2/sap-installation-wizard.desktop) application(YaST2/sap-windows_cheat_sheet.desktop) bone-installation-wizard = 4.6.15-1 bone-installation-wizard(x86-64) = 4.6.15-1 [ 105s] Requires(interp): /bin/sh [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires(pre): /bin/mkdir coreutils diffutils fillup grep logrotate sapconf yast2 [ 105s] Requires(post): /bin/sh [ 105s] Requires(preun): /bin/mkdir coreutils diffutils fillup grep logrotate sapconf yast2 [ 105s] Requires: /bin/bash [ 105s] Conflicts: sap-installation-wizard [ 105s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64 [ 105s] Wrote: /home/abuild/rpmbuild/SRPMS/sap-installation-wizard-4.6.15-1.src.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/sap-installation-wizard-4.6.15-1.x86_64.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/bone-installation-wizard-4.6.15-1.x86_64.rpm [ 106s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ny5Isk [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd sap-installation-wizard-4.6.15 [ 106s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sap-installation-wizard-4.6.15-1.x86_64 [ 106s] + exit 0 [ 106s] ... checking for files with abuild user/group [ 106s] ... running 00-check-install-rpms [ 106s] ... installing all built rpms [ 107s] Preparing packages... [ 107s] sap-installation-wizard-4.6.15-1.x86_64 [ 107s] Updating /etc/sysconfig/sap-installation-wizard ... [ 107s] bone-installation-wizard-4.6.15-1.x86_64 [ 107s] Updating /etc/sysconfig/sap-installation-wizard ... [ 107s] Updating /etc/sysconfig/pm-profiler ... [ 107s] Updating /etc/sysconfig/sapconf ... [ 107s] Created symlink /etc/systemd/system/multi-user.target.wants/sapconf.service -> /usr/lib/systemd/system/sapconf.service. [ 107s] ... running 50-check-binary-kernel-log [ 107s] ... running 50-check-core-files [ 107s] ... running 50-check-debuginfo [ 107s] ... testing for empty debuginfo packages [ 107s] ... running 50-check-filelist [ 107s] ... checking filelist [ 107s] ... running 50-check-gconf-scriptlets [ 107s] ... testing GConf scriptlet presence [ 107s] ... running 50-check-installtest [ 107s] ... testing for pre/postinstall scripts that are not idempotent [ 107s] Updating /etc/sysconfig/sap-installation-wizard ... [ 107s] Updating /etc/sysconfig/pm-profiler ... [ 107s] Updating /etc/sysconfig/sapconf ... [ 107s] Updating /etc/sysconfig/sap-installation-wizard ... [ 107s] ... running 50-check-invalid-provides [ 107s] ... running 50-check-invalid-requires [ 107s] ... running 50-check-kernel-build-id [ 107s] ... running 50-check-lanana [ 107s] ... running 50-check-libtool-deps [ 107s] ... testing devel dependencies required by libtool .la files [ 107s] (can be skipped by "skip-check-libtool-deps" anywhere in spec) [ 107s] ... running 50-check-packaged-twice [ 108s] ... running 50-check-permissions [ 108s] ... testing for modified permissions [ 108s] ... running 72-translate-appdata [ 108s] ... running 80-check-malware-scan-clamav [ 108s] unpacking /.build.packages/SRPMS/sap-installation-wizard-4.6.15-1.src.rpm [ 108s] unpacking /.build.packages/RPMS/x86_64/bone-installation-wizard-4.6.15-1.x86_64.rpm [ 108s] unpacking /.build.packages/RPMS/x86_64/sap-installation-wizard-4.6.15-1.x86_64.rpm [ 108s] clamscan -ir /usr/src/packages/BUILD/scan: [ 108s] LibClamAV Warning: ************************************************** [ 108s] LibClamAV Warning: *** The virus database is older than 7 days! *** [ 108s] LibClamAV Warning: *** Please update it as soon as possible. *** [ 108s] LibClamAV Warning: ************************************************** [ 137s] [ 137s] ----------- SCAN SUMMARY ----------- [ 137s] Known viruses: 8691864 [ 137s] Engine version: 0.103.11 [ 137s] Scanned directories: 58 [ 137s] Scanned files: 231 [ 137s] Infected files: 0 [ 137s] Data scanned: 2.11 MB [ 137s] Data read: 0.84 MB (ratio 2.53:1) [ 137s] Time: 29.035 sec (0 m 29 s) [ 137s] Start Date: 2024:06:12 15:28:26 [ 137s] End Date: 2024:06:12 15:28:55 [ 137s] clamav: negative malware scan result. [ 137s] test passed. [ 137s] ... running 98-revert-uname-hack [ 138s] ... running 99-check-remove-rpms [ 138s] ... removing all built rpms [ 138s] (order: reverse bone-installation-wizard sap-installation-wizard) [ 138s] [ 138s] RPMLINT report: [ 138s] =============== [ 140s] bone-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/firstboot_inst_sap.desktop xdg-su [ 140s] sap-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/firstboot_inst_sap.desktop xdg-su [ 140s] bone-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/sap-installation-wizard.desktop xdg-su [ 140s] sap-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/sap-installation-wizard.desktop xdg-su [ 140s] bone-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/sap-windows_cheat_sheet.desktop /usr/bin/firefox [ 140s] sap-installation-wizard.x86_64: W: desktopfile-without-binary /usr/share/applications/YaST2/sap-windows_cheat_sheet.desktop /usr/bin/firefox [ 140s] the .desktop file is for a file not present in the package. You should check [ 140s] the requires or see if this is not a error [ 140s] [ 140s] sap-installation-wizard.x86_64: W: empty-%postun [ 140s] sap-installation-wizard.x86_64: W: empty-%preun [ 140s] bone-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/GATEWAY.xml /usr/share/YaST2/data/y2sap/HA-ERS.xml:/usr/share/YaST2/data/y2sap/Webdispatcher.xml [ 140s] sap-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/GATEWAY.xml /usr/share/YaST2/data/y2sap/HA-ERS.xml:/usr/share/YaST2/data/y2sap/Webdispatcher.xml [ 140s] bone-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge FC630.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge M630.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R630.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R730.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R730xd.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge T630.xml [ 140s] sap-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge FC630.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge M630.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R630.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R730.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R730xd.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge T630.xml [ 140s] bone-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge T620.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R620.xml [ 140s] sap-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge T620.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Dell Inc._PowerEdge R620.xml [ 140s] bone-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Huawei Technologies Co., Ltd._generic.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Huawei_generic.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Supermicro_generic.xml [ 140s] sap-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_Huawei Technologies Co., Ltd._generic.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Huawei_generic.xml:/usr/share/YaST2/data/y2sap/hana_partitioning_Supermicro_generic.xml [ 140s] bone-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_NUTANIX_generic.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Nutanix_generic.xml [ 140s] sap-installation-wizard.x86_64: W: files-duplicate /usr/share/YaST2/data/y2sap/hana_partitioning_NUTANIX_generic.xml /usr/share/YaST2/data/y2sap/hana_partitioning_Nutanix_generic.xml [ 140s] bone-installation-wizard.x86_64: W: invalid-desktopfile /usr/share/applications/YaST2/sap-windows_cheat_sheet.desktop value "MIME;Documentation;" for key "Categories" in group "Desktop Entry" contains an unregistered value "MIME"; values extending the format should start with "X-" [ 140s] sap-installation-wizard.x86_64: W: invalid-desktopfile /usr/share/applications/YaST2/sap-windows_cheat_sheet.desktop value "MIME;Documentation;" for key "Categories" in group "Desktop Entry" contains an unregistered value "MIME"; values extending the format should start with "X-" [ 140s] .desktop file is not valid, check with desktop-file-validate [ 140s] [ 140s] sap-installation-wizard.x86_64: W: no-binary [ 140s] The package should be of the noarch architecture because it doesn't contain [ 140s] any binaries. [ 140s] [ 140s] bone-installation-wizard.x86_64: W: no-url-tag [ 140s] sap-installation-wizard.src: W: no-url-tag [ 140s] sap-installation-wizard.x86_64: W: no-url-tag [ 140s] The URL tag is missing. Please add a http or ftp link to the project location. [ 140s] [ 140s] bone-installation-wizard.x86_64: W: standard-dir-owned-by-package /usr/share/icons [ 140s] sap-installation-wizard.x86_64: W: standard-dir-owned-by-package /usr/share/icons [ 140s] This package owns a directory that is part of the standard hierarchy, which [ 140s] can lead to default directory permissions or ownerships being changed to [ 140s] something non-standard. [ 140s] [ 140s] bone-installation-wizard.x86_64: W: zero-length /usr/share/doc/packages/bone-installation-wizard/README.md [ 140s] sap-installation-wizard.x86_64: W: zero-length /usr/share/doc/packages/sap-installation-wizard/README.md [ 140s] 3 packages and 0 specfiles checked; 0 errors, 28 warnings. [ 140s] [ 140s] [ 140s] vm-yast-ci-worker finished "build sap-installation-wizard.spec" at Wed Jun 12 15:28:58 UTC 2024. [ 140s] /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/SRPMS/sap-installation-wizard-4.6.15-1.src.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/x86_64/bone-installation-wizard-4.6.15-1.x86_64.rpm /var/tmp/build-root/SUSE_SLE-15-SP6_GA-x86_64/home/abuild/rpmbuild/RPMS/x86_64/sap-installation-wizard-4.6.15-1.x86_64.rpm rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' sap-installation-wizard cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/sap-installation-wizard A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard-4.6.14.tar.bz2 A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.changes A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.spec At revision 9. /usr/lib/obs/service/format_spec_file --outdir . rm <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard-4.6.14.tar.bz2 rm <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.spec rm <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.changes cp package/sap-installation-wizard-4.6.15.tar.bz2 <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard cp package/sap-installation-wizard.spec <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard cp package/sap-installation-wizard.changes <https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/ws/Devel>:YaST:SLE-15-SP6/sap-installation-wizard osc -A 'https://api.suse.de/' addremove A sap-installation-wizard-4.6.15.tar.bz2 D sap-installation-wizard-4.6.14.tar.bz2 submitting package... osc -A https://api.suse.de/ commit -m - openQA test fails in wizard_hana_install - Crash of Gnome session (bsc#1184679) Fix xml syntax problem created in last checkin. - 4.6.15 Deleting sap-installation-wizard-4.6.14.tar.bz2 Sending sap-installation-wizard.changes Sending sap-installation-wizard.spec Sending sap-installation-wizard-4.6.15.tar.bz2 Transmitting file data ... Committed revision 10. rm -rf Devel:YaST:SLE-15-SP6 osc -A 'https://api.suse.de/' --traceback checkout 'Devel:YaST:SLE-15-SP6' sap-installation-wizard New package submitted to Devel:YaST:SLE-15-SP6 cleaning A Devel:YaST:SLE-15-SP6 A Devel:YaST:SLE-15-SP6/sap-installation-wizard A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard-4.6.15.tar.bz2 A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.changes A Devel:YaST:SLE-15-SP6/sap-installation-wizard/sap-installation-wizard.spec At revision 10. osc -A 'https://api.suse.de/' cat 'SUSE:SLE-15-SP6:GA' 'sap-installation-wizard' 'sap-installation-wizard.spec' > /tmp/yast-rake20240612-27995-sc9v5s osc -A https://api.suse.de/ service wait Devel:YaST:SLE-15-SP6 sap-installation-wizard Version has been changed in *.spec file Waiting for the server side service... ok yes | osc -A 'https://api.suse.de/' submitreq --no-cleanup 'Devel:YaST:SLE-15-SP6' 'sap-installation-wizard' 'SUSE:SLE-15-SP6:GA' -m 'submit new version 4.6.15 Version: 4.6.15' --yes Server returned an error: HTTP Error 403: Forbidden The target project SUSE:SLE-15-SP6:GA is not accepting requests because: Project is locked. Please use maintenance request for source changes and use osc requestbugownership to set bugowner of a package. rm -rf Devel:YaST:SLE-15-SP6 rake aborted! Command failed with status (1): [yes | osc -A 'https://api.suse.de/' submit...] Tasks: TOP => osc:sr (See full trace by running task with --trace) cleaning Result: PID 27992 exited with value 1 Scanning for a pull request... Found pull request #45 Adding comment ":x: Internal Jenkins [job #10](https://ci.suse.de/job/yast-sap-installation-wizard-SLE-15-SP6/10/) failed" to pull request https://github.com/yast/sap-installation-wizard/pull/45 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/sap-installation-wizard/issues/45/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user varkoly(a)g186.suse.de

1 1

Build failed in Jenkins: yast-autoyast-profiles-test #1671
by jenkins＠suse.de 23 Aug '24

23 Aug '24

See <https://ci.suse.de/job/yast-autoyast-profiles-test/1671/display/redirect> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on yast-head2 (yast-head libstorage libyui yast-openqa-client snapper) in workspace <https://ci.suse.de/job/yast-autoyast-profiles-test/ws/> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://ci.suse.de/job/yast-autoyast-profiles-test/ws/.git> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://github.com/yast/autoyast-profiles-test.git # timeout=10 Pruning obsolete local branches Fetching upstream changes from https://github.com/yast/autoyast-profiles-test.git > git --version # timeout=10 > git --version # 'git version 2.35.3' > git fetch --tags --force --progress --prune -- https://github.com/yast/autoyast-profiles-test.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision b45aba646753574032130ebcd392f0fcd161c11a (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f b45aba646753574032130ebcd392f0fcd161c11a # timeout=10 Commit message: "Merge pull request #3 from yast/master-bsc-1146403" > git rev-list --no-walk b45aba646753574032130ebcd392f0fcd161c11a # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 [yast-autoyast-profiles-test] $ /bin/sh -xe /tmp/jenkins1974044271200056370.sh + cd <https://ci.suse.de/job/yast-autoyast-profiles-test/ws/> + rake test:unit rspec --color --format doc 'test/sle-12-sp2-s390_test.rb' 'test/Head_test.rb' 'test/sle-12-sp1_test.rb' 'test/sle-11-sp4_test.rb' 'test/sle-12_test.rb' sh: rspec: command not found rake aborted! Command failed with status (127): [rspec --color --format doc 'test/sle-12-sp...] Tasks: TOP => test:unit (See full trace by running task with --trace) Build step 'Execute shell' marked build as failure

1 261

Build failed in Jenkins: yast-yast-kdump-master #38
by jenkins＠suse.de 24 Jul '24

24 Jul '24

See <https://ci.suse.de/job/yast-yast-kdump-master/38/display/redirect?page=chan…> Changes: [schubi] kdump and systemd-boot does not work together [schubi] kdump and systemd-boot does not work together [schubi] kdump and systemd-boot does not work together [schubi] kdump and systemd-boot does not work together [schubi] added warning string [schubi] added warning string [schubi] added warning string [schubi] updated version [schubi] fixed testcase [schubi] making rubocop happy [schubi] dup frozen string [schubi] removed frozen_string_literal [schubi] freeze constants [schubi] replacing -if not- with -unless- ------------------------------------------ Started by an SCM change Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on yast-head1 (yast-head libstorage libyui snapper) in workspace <https://ci.suse.de/job/yast-yast-kdump-master/ws/> The recommended git tool is: NONE No credentials specified Cloning the remote Git repository Cloning repository https://github.com/yast/yast-kdump.git > git init <https://ci.suse.de/job/yast-yast-kdump-master/ws/> # timeout=10 Fetching upstream changes from https://github.com/yast/yast-kdump.git > git --version # timeout=10 > git --version # 'git version 2.35.3' > git fetch --tags --force --progress -- https://github.com/yast/yast-kdump.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://github.com/yast/yast-kdump.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 6f0832b739af94a27c3dd2d0cae3fbaa770f21dd (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 6f0832b739af94a27c3dd2d0cae3fbaa770f21dd # timeout=10 Commit message: "Merge pull request #138 from yast/systemd-boot" > git rev-list --no-walk 6d275f878290c4e44b9d46cc122c030772dab125 # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 [EnvInject] - Executing scripts and injecting environment variables after the SCM step. [EnvInject] - Injecting as environment variables the properties content YAST_SUBMIT=factory [EnvInject] - Variables injected successfully. [EnvInject] - Mask passwords that will be passed as build parameters. [yast-yast-kdump-master] $ /bin/sh -xe /tmp/jenkins10457066398481895743.sh + cd <https://ci.suse.de/job/yast-yast-kdump-master/ws/> + LC_ALL=en_US.UTF-8 + /usr/local/bin/jenkins_status_comment.rb timeout 30m rake osc:sr * Starting syntax check... * Done * Making tarball <https://ci.suse.de/job/yast-yast-kdump-master/ws/package/yast2-kdump-5.0.1.…> ... * ...Done osc -A 'https://api.opensuse.org/' --traceback checkout 'YaST:Head' yast2-kdump All files have proper license reference. A YaST:Head A YaST:Head/yast2-kdump A YaST:Head/yast2-kdump/yast2-kdump-5.0.0.tar.bz2 A YaST:Head/yast2-kdump/yast2-kdump.changes A YaST:Head/yast2-kdump/yast2-kdump.spec At revision 384. rm <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump/yast2-kdump-5.0.0.tar.bz2 rm <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump/yast2-kdump.spec rm <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump/yast2-kdump.changes cp package/yast2-kdump.spec <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump cp package/yast2-kdump-5.0.1.tar.bz2 <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump cp package/yast2-kdump.changes <https://ci.suse.de/job/yast-yast-kdump-master/ws/YaST>:Head/yast2-kdump osc -A 'https://api.opensuse.org/' addremove A yast2-kdump-5.0.1.tar.bz2 D yast2-kdump-5.0.0.tar.bz2 osc -A 'https://api.opensuse.org/' cat 'openSUSE:Factory' 'yast2-kdump' 'yast2-kdump.spec' > /tmp/yast-rake20240621-6779-1t5bmf9 Checking IDs in *.changes file Version has been changed in *.spec file osc -A 'https://api.opensuse.org/' cat 'openSUSE:Factory' 'yast2-kdump' 'yast2-kdump.changes' | diff - 'yast2-kdump.changes' rm -rf YaST:Head rake aborted! Stopping, missing new bugzilla or fate entry in the *.changes file. e.g. bnc#<number> or fate#<number> Tasks: TOP => osc:sr => check:changelog (See full trace by running task with --trace) cleaning Result: PID 6776 exited with value 1 Scanning for a pull request... Found pull request #138 Adding comment ":x: Internal Jenkins [job #38](https://ci.suse.de/job/yast-yast-kdump-master/38/) failed" to pull request https://github.com/yast/yast-kdump/pull/138 Sending Net::HTTP::Post request to https://api.github.com/repos/yast/yast-kdump/issues/138/comments... OK Success Build step 'Execute shell' marked build as failure Not sending mail to unregistered user schubi(a)suse.de

1 1

[yast/yast-network] 7b328e: Fix typo when writing wireless channel
by Knut Alejandro Anderssen González 01 Jul '24

01 Jul '24

Branch: refs/heads/master Home: https://github.com/yast/yast-network Commit: 7b328e257b9777cbcaaa67654b4092016a901c42 https://github.com/yast/yast-network/commit/7b328e257b9777cbcaaa67654b40920… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Fix typo when writing wireless channel Commit: c10a6b66380e612ef9320d8761eab765d54f0fad https://github.com/yast/yast-network/commit/c10a6b66380e612ef9320d8761eab76… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec Log Message: ----------- Bump version & changelog Commit: a7854ada4f4129655e3d9fb875c9f5b9292e52e6 https://github.com/yast/yast-network/commit/a7854ada4f4129655e3d9fb875c9f5b… Author: Knut Alejandro Anderssen González <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge pull request #1339 from yast/fix_typo Fix typo when writing a wireless channel SLE-15-SP3 Commit: 9db99fb2a9916958169a329bee137556965c784e https://github.com/yast/yast-network/commit/9db99fb2a9916958169a329bee13755… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge branch 'SLE-15-SP3' into merge_SLE-15-SP3 Commit: 5d51681dcf3fb22830780d22a66d28ec641f1930 https://github.com/yast/yast-network/commit/5d51681dcf3fb22830780d22a66d28e… Author: Knut Alejandro Anderssen González <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge pull request #1340 from yast/merge_SLE-15-SP3 Fix typo when writing a wireless channel (SLE-15-SP4) Commit: e90727d89746671532cb46ba92fdbbcf97dcc23a https://github.com/yast/yast-network/commit/e90727d89746671532cb46ba92fdbbc… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/vlan.rb M src/lib/y2network/network_manager/connection_config_writers/wireless.rb A test/y2network/network_manager/connection_config_writers/vlan_test.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge branch 'SLE-15-SP4' into merge_SLE-15-SP4 Commit: e282b896fa17b9dc6cb86ccd157101057e55814d https://github.com/yast/yast-network/commit/e282b896fa17b9dc6cb86ccd1571010… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M test/y2network/network_manager/connection_config_writers/vlan_test.rb Log Message: ----------- Fix copyright year Commit: 93f86c72756e47536e92821e435812846032ca2e https://github.com/yast/yast-network/commit/93f86c72756e47536e92821e4358128… Author: Knut Alejandro Anderssen González <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/vlan.rb M src/lib/y2network/network_manager/connection_config_writers/wireless.rb A test/y2network/network_manager/connection_config_writers/vlan_test.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge pull request #1341 from yast/merge_SLE-15-SP4 Fix typo when writing wireless channel (SLE-15-SP5) Commit: 0841aa97ac032e9c17ef35e43e51e06bf0e46df2 https://github.com/yast/yast-network/commit/0841aa97ac032e9c17ef35e43e51e06… Author: Knut Anderssen <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/vlan_test.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge branch 'SLE-15-SP5' into merge_SLE-15-SP5 Commit: 84c4361aed711e754d5f22e32d41211e7b7261a6 https://github.com/yast/yast-network/commit/84c4361aed711e754d5f22e32d41211… Author: Knut Alejandro Anderssen González <kanderssen(a)suse.com> Date: 2023-07-04 (Tue, 04 Jul 2023) Changed paths: M package/yast2-network.changes M package/yast2-network.spec M src/lib/y2network/network_manager/connection_config_writers/wireless.rb M test/y2network/network_manager/connection_config_writers/vlan_test.rb M test/y2network/network_manager/connection_config_writers/wireless_test.rb Log Message: ----------- Merge pull request #1342 from yast/merge_SLE-15-SP5 Fix typo when writing wireless channel (master) Compare: https://github.com/yast/yast-network/compare/69b7eb24ee73...84c4361aed71

2 1

Build failed in Jenkins: yast-obs-sync-sle12-sp3 #264
by jenkins＠suse.de 22 Jun '24

22 Jun '24

See <https://ci.suse.de/job/yast-obs-sync-sle12-sp3/264/display/redirect> Changes: ------------------------------------------ [...truncated 6,92 KiB...] Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-core YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-country YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-dbus-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-devtools YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-dhcp-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-dns-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-drbd YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-fcoe-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-firewall YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-firstboot YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-ftp-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-geo-cluster YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-hardware-detection YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-http-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-inetd YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-installation YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-installation-control YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-instserver YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-iplb YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-iscsi-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-iscsi-lio-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-isns YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-journal YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-kdump YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-ldap YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-live-installer YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-mail YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-metapackage-handler YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-migration YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-multipath YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-network YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-nfs-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-nfs-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-nis-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-nis-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-ntp-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-online-update YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-online-update-configuration YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-packager YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-pam YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-perl-bindings YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-pkg-bindings YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-printer YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-product-creator YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-proxy YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-rdp YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-rear YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-registration YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-reipl YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-ruby-bindings YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-s390 YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-samba-client YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-samba-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-scanner YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-schema YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-security YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-services-manager YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-slp YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-slp-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-snapper YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-sound YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-squid YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-storage YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-sudo YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-support YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-sysconfig YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-testsuite YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-tftp-server YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-theme YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-theme-SLE YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-trans YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-trans-allpacks YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-trans-stats YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-transfer YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-tune YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-update YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-users YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-vm YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-vpn YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-x11 YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-xml YaST:SLE-12:SP3 Copying files... Done. osc -A https://api.suse.de copypac -t https://api.opensuse.org Devel:YaST:SLE-12-SP3 yast2-ycp-ui-bindings YaST:SLE-12:SP3 Copying files... Done. Build step 'Execute shell' marked build as failure

1 1

[yast/yast-kdump]
by Josef Reidinger 21 Jun '24

21 Jun '24

Branch: refs/heads/systemd-boot Home: https://github.com/yast/yast-kdump To unsubscribe from these emails, change your notification settings at https://github.com/yast/yast-kdump/settings/notifications

1 0