November 2021 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-SU-2021:3665-1: Security update for drbd-utils
by opensuse-security＠opensuse.org 16 Nov '21

16 Nov '21

openSUSE Security Update: Security update for drbd-utils ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:3665-1 Rating: low References: #1029961 #1185132 #1189363 SLE-21057 Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that contains security fixes and contains one feature can now be installed. Description: This update for drbd-utils fixes the following issues: - make all binaries position independent (basc#1185132). - Upgrade to 9.0.18 (bsc#1189363) * build: remove rpm related targets * drbdsetup,v84: fix minor compile warnings * systemd: resource specific activation * systemd: drbd-reactor promoter templates * doc: fix maximum ping timeout * doc: add man pages for the systemd templates * drbdadm,v9: fix dstate for diskless volumes * build/release: use lbvers.py * drbd-attr: don't leak fd to drbdsetup * doc: various fixes and additions * drbdsetup,events2,v9: add backing_device * build,Debian: rm dh-systemd dependency * drbdsetup,events2,v9: fix --poll regression * drbdmeta: fix bug with ALs with small final extents * build,Debian: rm mail recommends * drbdsetup,events2,v9: allow --poll without --now * drbdsetup,invalidate: allow bitmap based resync after verify * drbdadm,sh-ll-dev: change output to "none" if diskless * drbdadm,v9: allow set-gi in single node clusters * drbsetup,events2,v9: diff(erential) output * drbsetup,events2,v9: add --full output * v9: allow resource rename, also in drbdmon * drbdadm,v9: allow c-max-rate to be disabled * New drbd-attr Pacemaker RA * events2: handle mixed initial state and multicast events * events2: fix regression to always print resync done - Prepare '/usr' merge. (bsc#1029961) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2021-3665=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): drbd-utils-9.18.0-4.7.2 drbd-utils-debuginfo-9.18.0-4.7.2 drbd-utils-debugsource-9.18.0-4.7.2 References: https://bugzilla.suse.com/1029961 https://bugzilla.suse.com/1185132 https://bugzilla.suse.com/1189363

1 0

openSUSE-RU-2021:3663-1: moderate: Recommended update for suse-module-tools
by maintenance＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Recommended Update: Recommended update for suse-module-tools ______________________________________________________________________________ Announcement ID: openSUSE-RU-2021:3663-1 Rating: moderate References: #1191804 Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for suse-module-tools fixes the following issues: - Update to version 15.3.14: * more fixes for updates under secure boot * cert-script: Deal with existing $cert.delete file (bsc#1191804). Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2021-3663=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): suse-module-tools-15.3.14-3.14.1 suse-module-tools-legacy-15.3.14-3.14.1 References: https://bugzilla.suse.com/1191804

1 0

openSUSE-SU-2021:3662-1: important: Security update for samba
by opensuse-security＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Security Update: Security update for samba ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:3662-1 Rating: important References: #1192601 Cross-References: CVE-2020-25717 CVSS scores: CVE-2020-25717 (SUSE): 8.1 CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N Affected Products: openSUSE Leap 15.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for samba fixes the following issues: - Fix regression introduced by CVE-2020-25717 patches, winbindd does not start when 'allow trusted domains' is off; (bso#14899); Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2021-3662=1 Package List: - openSUSE Leap 15.3 (aarch64 ppc64le s390x x86_64): ctdb-4.13.13+git.531.903f5c0ccdc-3.17.1 ctdb-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 ctdb-pcp-pmda-4.13.13+git.531.903f5c0ccdc-3.17.1 ctdb-pcp-pmda-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 ctdb-tests-4.13.13+git.531.903f5c0ccdc-3.17.1 ctdb-tests-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-binding0-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-binding0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy-python3-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-core-devel-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-debugsource-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-dsdb-modules-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-dsdb-modules-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-gpupdate-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ldb-ldap-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ldb-ldap-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-python3-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-python3-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-test-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-test-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 - openSUSE Leap 15.3 (aarch64 x86_64): samba-ceph-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ceph-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 - openSUSE Leap 15.3 (aarch64_ilp32): libdcerpc-binding0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-binding0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi-devel-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-64bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-64bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 - openSUSE Leap 15.3 (noarch): samba-doc-4.13.13+git.531.903f5c0ccdc-3.17.1 - openSUSE Leap 15.3 (x86_64): libdcerpc-binding0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-binding0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc-samr0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libdcerpc0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-krb5pac0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-nbt0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr-standard0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libndr1-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi-devel-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libnetapi0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-credentials0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-errors0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-hostconfig0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-passdb0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-policy0-python3-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamba-util0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsamdb0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbclient0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbconf0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libsmbldap2-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libtevent-util0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 libwbclient0-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-ad-dc-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-client-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-libs-python3-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-32bit-4.13.13+git.531.903f5c0ccdc-3.17.1 samba-winbind-32bit-debuginfo-4.13.13+git.531.903f5c0ccdc-3.17.1 References: https://www.suse.com/security/cve/CVE-2020-25717.html https://bugzilla.suse.com/1192601

1 0

openSUSE-RU-2021:1478-1: moderate: Recommended update for steam
by maintenance＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Recommended Update: Recommended update for steam ______________________________________________________________________________ Announcement ID: openSUSE-RU-2021:1478-1 Rating: moderate References: #1192277 Affected Products: openSUSE Leap 15.3:NonFree openSUSE Leap 15.2:NonFree ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for steam fixes the following issues: Update to version 1.0.0.73: * Build using updated Steam client: - Client timestamp 1634158817 (2021-10-13) - Steam Runtime version 0.20210906.1 - Add libgbm1 to bool dependencies (boo#1192277) Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.3:NonFree: zypper in -t patch openSUSE-2021-1478=1 - openSUSE Leap 15.2:NonFree: zypper in -t patch openSUSE-2021-1478=1 Package List: - openSUSE Leap 15.3:NonFree (i586 x86_64): steam-1.0.0.73-lp153.2.12.1 steam-devices-1.0.0.73-lp153.2.12.1 - openSUSE Leap 15.2:NonFree (x86_64): steam-1.0.0.73-lp152.2.33.1 steam-devices-1.0.0.73-lp152.2.33.1 References: https://bugzilla.suse.com/1192277

1 0

openSUSE-SU-2021:1477-1: important: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:1477-1 Rating: important References: #1065729 #1085030 #1100416 #1129735 #1152489 #1154353 #1156395 #1157177 #1167773 #1172073 #1173604 #1176940 #1184673 #1185762 #1186109 #1187167 #1188563 #1188876 #1188983 #1188985 #1189841 #1190006 #1190067 #1190349 #1190351 #1190479 #1190620 #1190642 #1190795 #1190941 #1191229 #1191238 #1191241 #1191315 #1191317 #1191343 #1191349 #1191384 #1191449 #1191450 #1191451 #1191452 #1191455 #1191456 #1191628 #1191731 #1191800 #1191934 #1191958 #1192036 #1192040 #1192041 #1192107 #1192145 #1192267 #1192549 Cross-References: CVE-2018-13405 CVE-2021-33033 CVE-2021-34556 CVE-2021-3542 CVE-2021-35477 CVE-2021-3655 CVE-2021-3715 CVE-2021-3760 CVE-2021-3772 CVE-2021-3896 CVE-2021-41864 CVE-2021-42008 CVE-2021-42252 CVE-2021-42739 CVE-2021-43056 CVSS scores: CVE-2018-13405 (NVD) : 7.8 CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2018-13405 (SUSE): 4.4 CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N CVE-2021-33033 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-33033 (SUSE): 6.7 CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2021-34556 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N CVE-2021-3542 (SUSE): 6.4 CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H CVE-2021-35477 (SUSE): 6.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N CVE-2021-3655 (SUSE): 4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N CVE-2021-3715 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-3760 (SUSE): 6.4 CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-3772 (SUSE): 5.9 CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H CVE-2021-3896 (SUSE): 4.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-41864 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-42008 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-42008 (SUSE): 8.8 CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-42252 (SUSE): 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H CVE-2021-42739 (SUSE): 8.4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H CVE-2021-43056 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H CVE-2021-43056 (SUSE): 6.8 CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that solves 15 vulnerabilities and has 41 fixes is now available. Description: The openSUSE Leap 15.2 kernel was updated to receive various security and bugfixes. The following security bugs were fixed: - CVE-2018-13405: The inode_init_owner function in fs/inode.c allowed local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID (bnc#1100416 bnc#1129735). - CVE-2021-33033: The Linux kernel had a use-after-free in cipso_v4_genopt in net/ipv4/cipso_ipv4.c because the CIPSO and CALIPSO refcounting for the DOI definitions is mishandled, aka CID-ad5d07f4a9cd. This leads to writing an arbitrary value (bnc#1186109 bnc#1188876). - CVE-2021-34556: An unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because the protection mechanism neglects the possibility of uninitialized memory locations on the BPF stack (bnc#1188983). - CVE-2021-35477: An unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because a certain preempting store operation did not necessarily occur before a store operation that has an attacker-controlled value (bnc#1188985). - CVE-2021-3655: Missing size validations on inbound SCTP packets may have allowed the kernel to read uninitialized memory (bnc#1188563 bnc#1192267). - CVE-2021-3715: Fixed a use-after-free in route4_change() in net/sched/cls_route.c (bsc#1190349). - CVE-2021-3760: Fixed a use-after-free vulnerability with the ndev->rf_conn_info object (bsc#1190067). - CVE-2021-3772: Invalid chunks may be used to remotely remove existing associations (bsc#1190351). - CVE-2021-3896: Fixed a array-index-out-bounds in detach_capi_ctr in drivers/isdn/capi/kcapi.c (bsc#1191958). - CVE-2021-41864: prealloc_elems_and_freelist in kernel/bpf/stackmap.c allowed unprivileged users to trigger an eBPF multiplication integer overflow with a resultant out-of-bounds write (bnc#1191317). - CVE-2021-42008: The decode_data function in drivers/net/hamradio/6pack.c had a slab out-of-bounds write. Input from a process that has the CAP_NET_ADMIN capability can lead to root access (bnc#1191315). - CVE-2021-42252: An issue was discovered in aspeed_lpc_ctrl_mmap in drivers/soc/aspeed/aspeed-lpc-ctrl.c where local attackers were able to access the Aspeed LPC control interface could overwrite memory in the kernel and potentially execute privileges, aka CID-b49a0e69a7b1. This occurs because a certain comparison uses values that are not memory sizes (bnc#1190479). - CVE-2021-42739: The firewire subsystem had a buffer overflow related to drivers/media/firewire/firedtv-avc.c and drivers/media/firewire/firedtv-ci.c, because avc_ca_pmt mishandled bounds checking (bnc#1184673 bnc#1192036). - CVE-2021-42739: The firewire subsystem had a buffer overflow related to drivers/media/firewire/firedtv-avc.c and drivers/media/firewire/firedtv-ci.c, because avc_ca_pmt mishandled bounds checking (bsc#1184673). - CVE-2021-43056: It allowed a malicious KVM guest to crash the host, when the host is running on Power8, due to an arch/powerpc/kvm/book3s_hv_rmhandlers.S implementation bug in the handling of the SRR1 register values (bnc#1192107). The following non-security bugs were fixed: - acpi/arm64: fix next_platform_timer() section mismatch error (git-fixes). - ACPI: bgrt: Fix CFI violation (git-fixes). - ACPI: fix NULL pointer dereference (git-fixes). - ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros (git-fixes). - Add cherry-picked commit id to the usb hso fix (git-fixes) - Add obsolete_rebuilds_subpackage (boo#1172073 bsc#1191731). - ALSA: hda: avoid write to STATESTS if controller is in reset (git-fixes). - ALSA: hda/realtek: Add quirk for Clevo PC50HS (git-fixes). - ALSA: hda/realtek: Add quirk for Clevo X170KM-G (git-fixes). - ALSA: hda/realtek - ALC236 headset MIC recording issue (git-fixes). - ALSA: hda/realtek: Complete partial device name to avoid ambiguity (git-fixes). - ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW (git-fixes). - ALSA: seq: Fix a potential UAF by wrong private_free call order (git-fixes). - ALSA: usb-audio: Add quirk for VF0770 (git-fixes). - ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset (git-fixes). - ASoC: DAPM: Fix missing kctl change notifications (git-fixes). - ASoC: wm8960: Fix clock configuration on slave mode (git-fixes). - ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() (git-fixes). - ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init() (git-fixes). - audit: fix possible null-pointer dereference in audit_filter_rules (git-fixes). - bfq: Remove merged request already in bfq_requests_merged() (bsc#1191456). - blk: Fix lock inversion between ioc lock and bfqd lock (bsc#1191456). - blktrace: Fix uaf in blk_trace access after removing by sysfs (bsc#1191452). - block: bfq: fix bfq_set_next_ioprio_data() (bsc#1191451). - bnxt_en: Fix TX timeout when TX ring size is set to the smallest (git-fixes). - bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h (git-fixes). - bpf: Fix a typo of reuseport map in bpf.h (git-fixes). - bpf: Fix up bpf_skb_adjust_room helper's skb csum setting (git-fixes). - can: dev: can_restart: fix use after free bug (git-fixes). - can: peak_pci: peak_pci_remove(): fix UAF (git-fixes). - can: peak_usb: fix use after free bugs (git-fixes). - can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification (git-fixes). - can: rcar_can: fix suspend/resume (git-fixes). - can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path (git-fixes). - can: xilinx_can: handle failure cases of pm_runtime_get_sync (git-fixes). - cb710: avoid NULL pointer subtraction (git-fixes). - ceph: fix handling of "meta" errors (bsc#1192041). - ceph: skip existing superblocks that are blocklisted or shut down when mounting (bsc#1192040). - cfg80211: scan: fix RCU in cfg80211_add_nontrans_list() (git-fixes). - drm/amd/display: Pass PCI deviceid into DC (git-fixes). - drm/amdgpu: fix gart.bo pin_count leak (git-fixes). - drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() (git-fixes). - drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling (git-fixes). - drm/msm: Fix null pointer dereference on pointer edp (git-fixes). - drm/nouveau/debugfs: fix file release memory leak (git-fixes). - drm/panel: olimex-lcd-olinuxino: select CRC32 (git-fixes). - e1000e: Fix packet loss on Tiger Lake and later (git-fixes). - e100: fix buffer overrun in e100_get_regs (git-fixes). - e100: fix length calculation in e100_get_regs_len (git-fixes). - e100: handle eeprom as little endian (git-fixes). - ext4: fix reserved space counter leakage (bsc#1191450). - ext4: report correct st_size for encrypted symlinks (bsc#1191449). - fscrypt: add fscrypt_symlink_getattr() for computing st_size (bsc#1191449). - fs, mm: fix race in unlinking swapfile (bsc#1191455). - gpio: pca953x: Improve bias setting (git-fixes). - gve: Avoid freeing NULL pointer (git-fixes). - gve: Correct available tx qpl check (git-fixes). - gve: fix gve_get_stats() (git-fixes). - gve: Properly handle errors in gve_assign_qpl (bsc#1176940). - gve: report 64bit tx_bytes counter from gve_handle_report_stats() (bsc#1176940). - HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS (git-fixes). - HID: betop: fix slab-out-of-bounds Write in betop_probe (git-fixes). - HID: u2fzero: ignore incomplete packets without data (git-fixes). - HID: usbhid: free raw_report buffers in usbhid_stop (git-fixes). - HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs (git-fixes). - hso: fix bailout in error case of probe (git-fixes). - i2c: acpi: fix resource leak in reconfiguration device addition (git-fixes). - i40e: Fix ATR queue selection (git-fixes). - i40e: fix endless loop under rtnl (git-fixes). - i40e: Fix freeing of uninitialized misc IRQ vector (git-fixes). - iavf: fix double unlock of crit_lock (git-fixes). - ice: Add missing E810 device ids (jsc#SLE-7966 bsc#1157177). - ICMPv6: Add ICMPv6 Parameter Problem, code 3 definition (bsc#1191241). - iio: adc128s052: Fix the error handling path of 'adc128_probe()' (git-fixes). - iio: adc: aspeed: set driver data when adc probe (git-fixes). - iio: dac: ti-dac5571: fix an error code in probe() (git-fixes). - iio: light: opt3001: Fixed timeout error when 0 lux (git-fixes). - iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED (git-fixes). - iio: ssp_sensors: add more range checking in ssp_parse_dataframe() (git-fixes). - iio: ssp_sensors: fix error code in ssp_print_mcu_debug() (git-fixes). - Input: snvs_pwrkey - add clk handling (git-fixes). - Input: xpad - add support for another USB ID of Nacon GC-100 (git-fixes). - ionic: do not remove netdev->dev_addr when syncing uc list (bsc#1167773). - ipv6/netfilter: Discard first fragment not including all headers (bsc#1191241). - IPv6: reply ICMP error if the first fragment do not include all headers (bsc#1191241). - isdn: cpai: check ctr->cnr to avoid array index out of bound (git-fixes). - isdn: mISDN: Fix sleeping function called from invalid context (git-fixes). - ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup (git-fixes). - kabi: block: Fix kabi of blk_mq_sched_try_insert_merge() (bsc#1191456). - kernel-binary.spec: Do not sign kernel when no key provided (bsc#1187167). - KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs are live (bsc#1156395). - KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state (bsc#1156395). - KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path (bsc#1065729). - KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers (bsc#1156395). - KVM: PPC: Fix clearing never mapped TCEs in realmode (bsc#1156395). - KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak (bsc#1156395). - lan78xx: select CRC32 (git-fixes). - libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD (git-fixes). - mac80211: check return value of rhashtable_init (git-fixes). - mac80211: Drop frames from invalid MAC address in ad-hoc mode (git-fixes). - mei: me: add Ice Lake-N device id (git-fixes). - mlx5: count all link events (git-fixes). - mlxsw: thermal: Fix out-of-bounds memory accesses (git-fixes). - mmc: dw_mmc: exynos: fix the finding clock sample value (git-fixes). - mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk (git-fixes). - mmc: vub300: fix control-message timeouts (git-fixes). - net/af_unix: fix a data-race in unix_dgram_poll (bsc#1154353). - net: batman-adv: fix error handling (git-fixes). - net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size() (git-fixes). - net: can: ems_usb: fix use-after-free in ems_usb_disconnect() (git-fixes). - net: cdc_eem: fix tx fixup skb leak (git-fixes). - net: cdc_ncm: correct overhead in delayed_ndp_size (git-fixes). - netfilter: conntrack: collect all entries in one cycle (bsc#1173604). - net: hns3: fix vf reset workqueue cannot exit (bsc#1154353). - net: hso: add failure handler for add_net_device (git-fixes). - net: hso: fix NULL-deref on disconnect regression (git-fixes). - net: hso: fix null-ptr-deref during tty device unregistration (git-fixes). - net: ipv6: Discard next-hop MTU less than minimum link MTU (bsc#1191241). - net: lan78xx: fix division by zero in send path (git-fixes). - net: mana: Fix error handling in mana_create_rxq() (git-fixes, bsc#1191800). - net/mlx4_en: Do not allow aRFS for encapsulated packets (git-fixes). - net/mlx4_en: Resolve bad operstate value (git-fixes). - net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp (git-fixes). - net/mlx5: Fix unpublish devlink parameters (jsc#SLE-8464). - net/mlx5: FWTrace, cancel work on alloc pd error flow (git-fixes). - net: usb: Fix uninit-was-stored issue in asix_read_phy_addr() (git-fixes). - NFC: digital: fix possible memory leak in digital_in_send_sdd_req() (git-fixes). - NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() (git-fixes). - nfc: fix error handling of nfc_proto_register() (git-fixes). - nfc: port100: fix using -ERRNO as command type mask (git-fixes). - nfs: dir_cookie is a pointer to the cookie in older kernels, not the cookie itself. (bsc#1191628 bsc#1192549). - NFS: Do uncached readdir when we're seeking a cookie in an empty page cache (bsc#1191628). - nvme: add command id quirk for apple controllers (git-fixes). - nvme-fc: avoid race between time out and tear down (bsc#1185762). - nvme-fc: remove freeze/unfreeze around update_nr_hw_queues (bsc#1185762). - nvme-fc: update hardware queues before using them (bsc#1185762). - nvme-pci: Fix abort command id (git-fixes). - nvme-pci: fix error unwind in nvme_map_data (bsc#1191934). - nvme-pci: refactor nvme_unmap_data (bsc#1191934). - ocfs2: fix data corruption after conversion from inline format (bsc#1190795). - pata_legacy: fix a couple uninitialized variable bugs (git-fixes). - PCI: Fix pci_host_bridge struct device release/free handling (git-fixes). - phy: mdio: fix memory leak (git-fixes). - platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call (git-fixes). - platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call (git-fixes). - platform/x86: intel_scu_ipc: Update timeout value in comment (git-fixes). - powerpc/bpf: Fix BPF_MOD when imm == 1 (bsc#1065729). - powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 (bsc#1065729). - powerpc/bpf: Use bctrl for making function calls (bsc#1065729). - powerpc/lib: Fix emulate_step() std test (bsc#1065729). - powerpc/pseries: Fix build error when NUMA=n (bsc#1190620 ltc#194498 git-fixes). - powerpc/xive: Discard disabled interrupts in get_irqchip_state() (bsc#1085030 git-fixes). - pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init (git-fixes). - ptp_pch: Load module automatically if ID matches (git-fixes). - ptp_pch: Restore dependency on PCI (git-fixes). - qed: Fix missing error code in qed_slowpath_start() (git-fixes). - qed: Handle management FW error (git-fixes). - qed: rdma - do not wait for resources under hw error recovery flow (git-fixes). - regmap: Fix possible double-free in regcache_rbtree_exit() (git-fixes). - rpm: use _rpmmacrodir (boo#1191384) - scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss (bsc#1192145). - scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted (bsc#1192145). - scsi: lpfc: Correct sysfs reporting of loop support after SFP status change (bsc#1192145). - scsi: lpfc: Fix link down processing to address NULL pointer dereference (bsc#1192145). - scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling (bsc#1191349). - scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine (bsc#1192145). - scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() (bsc#1192145). - scsi: lpfc: Update lpfc version to 14.0.0.3 (bsc#1192145). - scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset (bsc#1192145). - scsi: qla2xxx: Add debug print of 64G link speed (bsc#1190941). - scsi: qla2xxx: Add host attribute to trigger MPI hang (bsc#1190941). - scsi: qla2xxx: Add support for mailbox passthru (bsc#1190941). - scsi: qla2xxx: Adjust request/response queue size for 28xx (bsc#1190941). - scsi: qla2xxx: Call process_response_queue() in Tx path (bsc#1190941). - scsi: qla2xxx: Changes to support FCP2 Target (bsc#1190941). - scsi: qla2xxx: Changes to support kdump kernel (bsc#1190941). - scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS (bsc#1190941). - scsi: qla2xxx: Check for firmware capability before creating QPair (bsc#1190941). - scsi: qla2xxx: Display 16G only as supported speeds for 3830c card (bsc#1190941). - scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus reset (bsc#1190941). - scsi: qla2xxx: edif: Add N2N support for EDIF (bsc#1190941). - scsi: qla2xxx: edif: Do secure PLOGI when auth app is present (bsc#1190941). - scsi: qla2xxx: edif: Fix EDIF enable flag (bsc#1190941). - scsi: qla2xxx: edif: Fix returnvar.cocci warnings (bsc#1190941). - scsi: qla2xxx: edif: Fix stale session (bsc#1190941). - scsi: qla2xxx: edif: Reject AUTH ELS on session down (bsc#1190941). - scsi: qla2xxx: edif: Use link event to wake up app (bsc#1190941). - scsi: qla2xxx: Fix crash in NVMe abort path (bsc#1190941). - scsi: qla2xxx: Fix excessive messages during device logout (bsc#1190941). - scsi: qla2xxx: Fix hang during NVMe session tear down (bsc#1190941). - scsi: qla2xxx: Fix hang on NVMe command timeouts (bsc#1190941). - scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs file (bsc#1190941). - scsi: qla2xxx: Fix NPIV create erroneous error (bsc#1190941). - scsi: qla2xxx: Fix NVMe | FCP personality change (bsc#1190941). - scsi: qla2xxx: Fix NVMe retry (bsc#1190941). - scsi: qla2xxx: Fix NVMe session down detection (bsc#1190941). - scsi: qla2xxx: Fix port type info (bsc#1190941). - scsi: qla2xxx: Fix unsafe removal from linked list (bsc#1190941). - scsi: qla2xxx: Fix use after free in eh_abort path (bsc#1190941). - scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueue (bsc#1190941). - scsi: qla2xxx: Open-code qla2xxx_eh_device_reset() (bsc#1190941). - scsi: qla2xxx: Open-code qla2xxx_eh_target_reset() (bsc#1190941). - scsi: qla2xxx: Remove redundant initialization of pointer req (bsc#1190941). - scsi: qla2xxx: Restore initiator in dual mode (bsc#1190941). - scsi: qla2xxx: Show OS name and version in FDMI-1 (bsc#1190941). - scsi: qla2xxx: Suppress unnecessary log messages during login (bsc#1190941). - scsi: qla2xxx: Sync queue idx with queue_pair_map idx (bsc#1190941). - scsi: qla2xxx: Update version to 10.02.06.100-k (bsc#1190941). - scsi: qla2xxx: Update version to 10.02.06.200-k (bsc#1190941). - scsi: qla2xxx: Update version to 10.02.07.100-k (bsc#1190941). - scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (bsc#1190941). - sctp: check asoc peer.asconf_capable before processing asconf (bsc#1190351). - soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment (git-fixes). - spi: spi-nxp-fspi: do not depend on a specific node name erratum workaround (git-fixes). - tpm: ibmvtpm: Avoid error message when process gets signal while waiting (bsc#1065729). - USB: cdc-acm: clean up probe error labels (git-fixes). - USB: cdc-acm: fix minor-number release (git-fixes). - usb: hso: fix error handling code of hso_create_net_device (git-fixes). - usb: hso: remove the bailout parameter (git-fixes). - usb: musb: dsps: Fix the probe error path (git-fixes). - USB: serial: option: add prod. id for Quectel EG91 (git-fixes). - USB: serial: option: add Quectel EC200S-CN module support (git-fixes). - USB: serial: option: add Telit LE910Cx composition 0x1204 (git-fixes). - USB: serial: qcserial: add EM9191 QDL support (git-fixes). - USB: xhci: dbc: fix tty registration race (git-fixes). - video: fbdev: gbefb: Only instantiate device when built for IP32 (git-fixes). - virtio: write back F_VERSION_1 before validate (git-fixes). - watchdog: orion: use 0 for unset heartbeat (git-fixes). - x86/pat: Pass valid address to sanitize_phys() (bsc#1152489). - x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions (bsc#1152489). - x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails (bsc#1152489). - xen: fix setting of max_pfn in shared_info (git-fixes). - xen: reset legacy rtc flag for PV domU (git-fixes). - xfs: ensure that the inode uid/gid match values match the icdinode ones (bsc#1190006). - xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes (bsc#1190642). - xfs: merge the projid fields in struct xfs_icdinode (bsc#1190006). - xfs: remove the icdinode di_uid/di_gid members (bsc#1190006). - xhci: Enable trust tx length quirk for Fresco FL11 USB controller (git-fixes). - xhci: Fix command ring pointer corruption while aborting a command (git-fixes). - xhci: guard accesses to ep_state in xhci_endpoint_reset() (git-fixes). - xhci: guard accesses to ep_state in xhci_endpoint_reset() (git-fixes). Special Instructions and Notes: Please reboot the system after installing this update. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1477=1 Package List: - openSUSE Leap 15.2 (noarch): kernel-devel-5.3.18-lp152.102.1 kernel-docs-5.3.18-lp152.102.1 kernel-docs-html-5.3.18-lp152.102.1 kernel-macros-5.3.18-lp152.102.1 kernel-source-5.3.18-lp152.102.1 kernel-source-vanilla-5.3.18-lp152.102.1 - openSUSE Leap 15.2 (x86_64): kernel-debug-5.3.18-lp152.102.1 kernel-debug-debuginfo-5.3.18-lp152.102.1 kernel-debug-debugsource-5.3.18-lp152.102.1 kernel-debug-devel-5.3.18-lp152.102.1 kernel-debug-devel-debuginfo-5.3.18-lp152.102.1 kernel-default-5.3.18-lp152.102.1 kernel-default-base-5.3.18-lp152.102.1.lp152.8.49.1 kernel-default-base-rebuild-5.3.18-lp152.102.1.lp152.8.49.1 kernel-default-debuginfo-5.3.18-lp152.102.1 kernel-default-debugsource-5.3.18-lp152.102.1 kernel-default-devel-5.3.18-lp152.102.1 kernel-default-devel-debuginfo-5.3.18-lp152.102.1 kernel-kvmsmall-5.3.18-lp152.102.1 kernel-kvmsmall-debuginfo-5.3.18-lp152.102.1 kernel-kvmsmall-debugsource-5.3.18-lp152.102.1 kernel-kvmsmall-devel-5.3.18-lp152.102.1 kernel-kvmsmall-devel-debuginfo-5.3.18-lp152.102.1 kernel-obs-build-5.3.18-lp152.102.1 kernel-obs-build-debugsource-5.3.18-lp152.102.1 kernel-obs-qa-5.3.18-lp152.102.1 kernel-preempt-5.3.18-lp152.102.1 kernel-preempt-debuginfo-5.3.18-lp152.102.1 kernel-preempt-debugsource-5.3.18-lp152.102.1 kernel-preempt-devel-5.3.18-lp152.102.1 kernel-preempt-devel-debuginfo-5.3.18-lp152.102.1 kernel-syms-5.3.18-lp152.102.1 References: https://www.suse.com/security/cve/CVE-2018-13405.html https://www.suse.com/security/cve/CVE-2021-33033.html https://www.suse.com/security/cve/CVE-2021-34556.html https://www.suse.com/security/cve/CVE-2021-3542.html https://www.suse.com/security/cve/CVE-2021-35477.html https://www.suse.com/security/cve/CVE-2021-3655.html https://www.suse.com/security/cve/CVE-2021-3715.html https://www.suse.com/security/cve/CVE-2021-3760.html https://www.suse.com/security/cve/CVE-2021-3772.html https://www.suse.com/security/cve/CVE-2021-3896.html https://www.suse.com/security/cve/CVE-2021-41864.html https://www.suse.com/security/cve/CVE-2021-42008.html https://www.suse.com/security/cve/CVE-2021-42252.html https://www.suse.com/security/cve/CVE-2021-42739.html https://www.suse.com/security/cve/CVE-2021-43056.html https://bugzilla.suse.com/1065729 https://bugzilla.suse.com/1085030 https://bugzilla.suse.com/1100416 https://bugzilla.suse.com/1129735 https://bugzilla.suse.com/1152489 https://bugzilla.suse.com/1154353 https://bugzilla.suse.com/1156395 https://bugzilla.suse.com/1157177 https://bugzilla.suse.com/1167773 https://bugzilla.suse.com/1172073 https://bugzilla.suse.com/1173604 https://bugzilla.suse.com/1176940 https://bugzilla.suse.com/1184673 https://bugzilla.suse.com/1185762 https://bugzilla.suse.com/1186109 https://bugzilla.suse.com/1187167 https://bugzilla.suse.com/1188563 https://bugzilla.suse.com/1188876 https://bugzilla.suse.com/1188983 https://bugzilla.suse.com/1188985 https://bugzilla.suse.com/1189841 https://bugzilla.suse.com/1190006 https://bugzilla.suse.com/1190067 https://bugzilla.suse.com/1190349 https://bugzilla.suse.com/1190351 https://bugzilla.suse.com/1190479 https://bugzilla.suse.com/1190620 https://bugzilla.suse.com/1190642 https://bugzilla.suse.com/1190795 https://bugzilla.suse.com/1190941 https://bugzilla.suse.com/1191229 https://bugzilla.suse.com/1191238 https://bugzilla.suse.com/1191241 https://bugzilla.suse.com/1191315 https://bugzilla.suse.com/1191317 https://bugzilla.suse.com/1191343 https://bugzilla.suse.com/1191349 https://bugzilla.suse.com/1191384 https://bugzilla.suse.com/1191449 https://bugzilla.suse.com/1191450 https://bugzilla.suse.com/1191451 https://bugzilla.suse.com/1191452 https://bugzilla.suse.com/1191455 https://bugzilla.suse.com/1191456 https://bugzilla.suse.com/1191628 https://bugzilla.suse.com/1191731 https://bugzilla.suse.com/1191800 https://bugzilla.suse.com/1191934 https://bugzilla.suse.com/1191958 https://bugzilla.suse.com/1192036 https://bugzilla.suse.com/1192040 https://bugzilla.suse.com/1192041 https://bugzilla.suse.com/1192107 https://bugzilla.suse.com/1192145 https://bugzilla.suse.com/1192267 https://bugzilla.suse.com/1192549

1 0

openSUSE-RU-2021:1476-1: moderate: Recommended update for transactional-update
by maintenance＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Recommended Update: Recommended update for transactional-update ______________________________________________________________________________ Announcement ID: openSUSE-RU-2021:1476-1 Rating: moderate References: #1133891 #1149131 #1162320 #1168389 #1192078 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that has 5 recommended fixes can now be installed. Description: This update for transactional-update fixes the following issues: Update to version 2.22: - Use pkgconf to determine installation paths - Enable SSL connections in update shell [boo#1149131] & [boo#1133891] & [boo#1192078] - Rework error messages on failing umount [boo#1168389] - Use slave mounts for /proc, /sys & /dev - Mount efivarfs on EFI systems to make sure the bootloader will be installed correctly [boo#1162320] - Fix removal of existing overlay directories Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1476=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): transactional-update-2.22-lp152.2.6.1 transactional-update-debuginfo-2.22-lp152.2.6.1 transactional-update-debugsource-2.22-lp152.2.6.1 - openSUSE Leap 15.2 (noarch): transactional-update-zypp-config-2.22-lp152.2.6.1 References: https://bugzilla.suse.com/1133891 https://bugzilla.suse.com/1149131 https://bugzilla.suse.com/1162320 https://bugzilla.suse.com/1168389 https://bugzilla.suse.com/1192078

1 0

openSUSE-RU-2021:1472-1: Recommended update for subtitlecomposer
by maintenance＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Recommended Update: Recommended update for subtitlecomposer ______________________________________________________________________________ Announcement ID: openSUSE-RU-2021:1472-1 Rating: low References: #1171768 #1192342 Affected Products: openSUSE Leap 15.2 openSUSE Backports SLE-15-SP3 openSUSE Backports SLE-15-SP1 ______________________________________________________________________________ An update that has two recommended fixes can now be installed. Description: subtitlecomposer was updated to fix the following issues: - fixed empty lines crash (fixes boo#1192342 boo#1171768) Update to version 0.7.1 * Fixed theme/icons/look outside KDE environment * Fixed various bugs and rare crashes * Fixed Undo stack and improved text editing undo * Improved/replaced Video player(s) (performance, Wayland support, OpenGL/FFmpeg) * Improved Waveform performance * Improved LinesWidget/Model performance * Improved Wayland support * Improved open/save file dialogs to use native dialogs * Improved text charsets/encodings/end-of-line selection, detection and handling * Improved VobSub support * Improved inline editor to support text styles * Improved subtitle style rendering * Improved character/sec support and added coloring * Improvide command line - ability to open all subtitle/media files * Added Pause/Duration columns to list view * Removed invalid subpicture/x-pgs mime * Updated/added many translations - thanks to KDE community Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1472=1 - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2021-1472=1 - openSUSE Backports SLE-15-SP1: zypper in -t patch openSUSE-2021-1472=1 Package List: - openSUSE Leap 15.2 (x86_64): subtitlecomposer-0.7.1-lp152.4.3.1 subtitlecomposer-debuginfo-0.7.1-lp152.4.3.1 subtitlecomposer-debugsource-0.7.1-lp152.4.3.1 - openSUSE Leap 15.2 (noarch): subtitlecomposer-lang-0.7.1-lp152.4.3.1 - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): subtitlecomposer-0.7.1-bp153.2.3.1 subtitlecomposer-debuginfo-0.7.1-bp153.2.3.1 subtitlecomposer-debugsource-0.7.1-bp153.2.3.1 - openSUSE Backports SLE-15-SP3 (noarch): subtitlecomposer-lang-0.7.1-bp153.2.3.1 - openSUSE Backports SLE-15-SP1 (ppc64le s390x x86_64): subtitlecomposer-0.7.1-bp151.4.3.1 - openSUSE Backports SLE-15-SP1 (noarch): subtitlecomposer-lang-0.7.1-bp151.4.3.1 References: https://bugzilla.suse.com/1171768 https://bugzilla.suse.com/1192342

1 0

openSUSE-SU-2021:1475-1: moderate: Security update for binutils
by opensuse-security＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Security Update: Security update for binutils ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:1475-1 Rating: moderate References: #1179898 #1179899 #1179900 #1179901 #1179902 #1179903 #1180451 #1180454 #1180461 #1181452 #1182252 #1183511 #1183909 #1184519 #1184620 #1184794 #1188941 #1191473 #1192267 PM-2767 SLE-18637 SLE-19618 SLE-21561 Cross-References: CVE-2020-16590 CVE-2020-16591 CVE-2020-16592 CVE-2020-16593 CVE-2020-16598 CVE-2020-16599 CVE-2020-35448 CVE-2020-35493 CVE-2020-35496 CVE-2020-35507 CVE-2021-20197 CVE-2021-20284 CVE-2021-20294 CVE-2021-3487 CVSS scores: CVE-2020-16590 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16590 (SUSE): 4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L CVE-2020-16591 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16591 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16592 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16592 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16593 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16593 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16598 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16598 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16599 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-16599 (SUSE): 4 CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L CVE-2020-35448 (NVD) : 3.3 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:N CVE-2020-35448 (SUSE): 3.3 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L CVE-2020-35493 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35493 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35496 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35496 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35507 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2020-35507 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-20197 (NVD) : 6.3 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N CVE-2021-20197 (SUSE): 6.3 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N CVE-2021-20284 (NVD) : 5.5 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-20284 (SUSE): 4.7 CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-20294 (NVD) : 7.8 CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-20294 (SUSE): 7 CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H CVE-2021-3487 (NVD) : 6.5 CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H CVE-2021-3487 (SUSE): 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that solves 14 vulnerabilities, contains four features and has 5 fixes is now available. Description: This update for binutils fixes the following issues: Update to binutils 2.37: * The GNU Binutils sources now requires a C99 compiler and library to build. * Support for Realm Management Extension (RME) for AArch64 has been added. * A new linker option '-z report-relative-reloc' for x86 ELF targets has been added to report dynamic relative relocations. * A new linker option '-z start-stop-gc' has been added to disable special treatment of __start_*/__stop_* references when --gc-sections. * A new linker options '-Bno-symbolic' has been added which will cancel the '-Bsymbolic' and '-Bsymbolic-functions' options. * The readelf tool has a new command line option which can be used to specify how the numeric values of symbols are reported. --sym-base=0|8|10|16 tells readelf to display the values in base 8, base 10 or base 16. A sym base of 0 represents the default action of displaying values under 10000 in base 10 and values above that in base 16. * A new format has been added to the nm program. Specifying '--format=just-symbols' (or just using -j) will tell the program to only display symbol names and nothing else. * A new command line option '--keep-section-symbols' has been added to objcopy and strip. This stops the removal of unused section symbols when the file is copied. Removing these symbols saves space, but sometimes they are needed by other tools. * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options supported by objcopy now make undefined symbols weak on targets that support weak symbols. * Readelf and objdump can now display and use the contents of .debug_sup sections. * Readelf and objdump will now follow links to separate debug info files by default. This behaviour can be stopped via the use of the new '-wN' or '--debug-dump=no-follow-links' options for readelf and the '-WN' or '--dwarf=no-follow-links' options for objdump. Also the old behaviour can be restored by the use of the '--enable-follow-debug-links=no' configure time option. The semantics of the =follow-links option have also been slightly changed. When enabled, the option allows for the loading of symbol tables and string tables from the separate files which can be used to enhance the information displayed when dumping other sections, but it does not automatically imply that information from the separate files should be displayed. If other debug section display options are also enabled (eg '--debug-dump=info') then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. If however non-debug section display options are enabled (eg '--sections') then the contents of matching parts of the separate debuginfo file will *not* be displayed. This is because in most cases the user probably only wanted to load the symbol information from the separate debuginfo file. In order to change this behaviour a new command line option --process-links can be used. This will allow di0pslay options to applied to both the main file and any separate debuginfo files. * Nm has a new command line option: '--quiet'. This suppresses "no symbols" diagnostic. Update to binutils 2.36: New features in the Assembler: - General: * When setting the link order attribute of ELF sections, it is now possible to use a numeric section index instead of symbol name. * Added a .nop directive to generate a single no-op instruction in a target neutral manner. This instruction does have an effect on DWARF line number generation, if that is active. * Removed --reduce-memory-overheads and --hash-size as gas now uses hash tables that can be expand and shrink automatically. - X86/x86_64: * Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key Locker instructions. * Support non-absolute segment values for lcall and ljmp. * Add {disp16} pseudo prefix to x86 assembler. * Configure with --enable-x86-used-note by default for Linux/x86. - ARM/AArch64: * Add support for Cortex-A78, Cortex-A78AE and Cortex-X1, Cortex-R82, Neoverse V1, and Neoverse N2 cores. * Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call Stack Recorder Extension) and BRBE (Branch Record Buffer Extension) system registers. * Add support for Armv8-R and Armv8.7-A ISA extensions. * Add support for DSB memory nXS barrier, WFET and WFIT instruction for Armv8.7. * Add support for +csre feature for -march. Add CSR PDEC instruction for CSRE feature in AArch64. * Add support for +flagm feature for -march in Armv8.4 AArch64. * Add support for +ls64 feature for -march in Armv8.7 AArch64. Add atomic 64-byte load/store instructions for this feature. * Add support for +pauth (Pointer Authentication) feature for -march in AArch64. New features in the Linker: * Add --error-handling-script=<NAME> command line option to allow a helper script to be invoked when an undefined symbol or a missing library is encountered. This option can be suppressed via the configure time switch: --enable-error-handling-script=no. * Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark x86-64-{baseline|v[234]} ISA level as needed. * Add -z unique-symbol to avoid duplicated local symbol names. * The creation of PE format DLLs now defaults to using a more secure set of DLL characteristics. * The linker now deduplicates the types in .ctf sections. The new command-line option --ctf-share-types describes how to do this: its default value, share-unconflicted, produces the most compact output. * The linker now omits the "variable section" from .ctf sections by default, saving space. This is almost certainly what you want unless you are working on a project that has its own analogue of symbol tables that are not reflected in the ELF symtabs. New features in other binary tools: * The ar tool's previously unused l modifier is now used for specifying dependencies of a static library. The arguments of this option (or --record-libdeps long form option) will be stored verbatim in the __.LIBDEP member of the archive, which the linker may read at link time. * Readelf can now display the contents of LTO symbol table sections when asked to do so via the --lto-syms command line option. * Readelf now accepts the -C command line option to enable the demangling of symbol names. In addition the --demangle=<style>, --no-demangle, --recurse-limit and --no-recurse-limit options are also now availale. Other fixes: - For compatibility on old code stream that expect 'brcl 0,label' to not be disassembled as 'jgnop label' on s390x. (bsc#1192267) This reverts IBM zSeries HLASM support for now. - Fixed that ppc64 optflags did not enable LTO (bsc#1188941). - Fix empty man-pages from broken release tarball - Fixed a memory corruption with rpath option (bsc#1191473). - Fixed slow performance of stripping some binaries (bsc#1183909). The following security fixes are addressed by the update: - CVE-2021-20197: Fixed a race condition which allows users to own arbitrary files (bsc#1181452). - CVE-2021-20284: Fixed a heap-based buffer overflow in _bfd_elf_slurp_secondary_reloc_section in elf.c (bsc#1183511). - CVE-2021-3487: Fixed a denial of service via excessive debug section size causing excessive memory consumption in bfd's dwarf2.c read_section() (bsc#1184620). - CVE-2020-35448: Fixed a heap-based buffer over-read in bfd_getl_signed_32() in libbfd.c (bsc#1184794). - CVE-2020-16590: Fixed a double free vulnerability in process_symbol_table() (bsc#1179898). - CVE-2020-16591: Fixed an invalid read in process_symbol_table() (bsc#1179899). - CVE-2020-16592: Fixed an use-after-free in bfd_hash_lookup() (bsc#1179900). - CVE-2020-16593: Fixed a null pointer dereference in scan_unit_for_symbols() (bsc#1179901). - CVE-2020-16598: Fixed a null pointer dereference in debug_get_real_type() (bsc#1179902). - CVE-2020-16599: Fixed a null pointer dereference in _bfd_elf_get_symbol_version_string() (bsc#1179903) - CVE-2020-35493: Fixed heap-based buffer overflow in bfd_pef_parse_function_stubs function in bfd/pef.c via crafted PEF file (bsc#1180451). - CVE-2020-35496: Fixed multiple null pointer dereferences in bfd module due to not checking return value of bfd_malloc (bsc#1180454). - CVE-2020-35507: Fixed a null pointer dereference in bfd_pef_parse_function_stubs() (bsc#1180461). - CVE-2021-20294: Fixed out-of-bounds write in print_dynamic_symbol in readelf (bnc#1184519) Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1475=1 Package List: - openSUSE Leap 15.2 (i586 x86_64): binutils-2.37-lp152.4.9.1 binutils-debuginfo-2.37-lp152.4.9.1 binutils-debugsource-2.37-lp152.4.9.1 binutils-devel-2.37-lp152.4.9.1 binutils-gold-2.37-lp152.4.9.1 binutils-gold-debuginfo-2.37-lp152.4.9.1 libctf-nobfd0-2.37-lp152.4.9.1 libctf-nobfd0-debuginfo-2.37-lp152.4.9.1 libctf0-2.37-lp152.4.9.1 libctf0-debuginfo-2.37-lp152.4.9.1 - openSUSE Leap 15.2 (noarch): bpftrace-tools-0.11.4-lp152.2.7.1 - openSUSE Leap 15.2 (x86_64): binutils-devel-32bit-2.37-lp152.4.9.1 bpftrace-0.11.4-lp152.2.7.1 cross-aarch64-binutils-2.37-lp152.4.9.1 cross-aarch64-binutils-debuginfo-2.37-lp152.4.9.1 cross-aarch64-binutils-debugsource-2.37-lp152.4.9.1 cross-arm-binutils-2.37-lp152.4.9.1 cross-arm-binutils-debuginfo-2.37-lp152.4.9.1 cross-arm-binutils-debugsource-2.37-lp152.4.9.1 cross-avr-binutils-2.37-lp152.4.9.1 cross-avr-binutils-debuginfo-2.37-lp152.4.9.1 cross-avr-binutils-debugsource-2.37-lp152.4.9.1 cross-epiphany-binutils-2.37-lp152.4.9.1 cross-epiphany-binutils-debuginfo-2.37-lp152.4.9.1 cross-epiphany-binutils-debugsource-2.37-lp152.4.9.1 cross-hppa-binutils-2.37-lp152.4.9.1 cross-hppa-binutils-debuginfo-2.37-lp152.4.9.1 cross-hppa-binutils-debugsource-2.37-lp152.4.9.1 cross-hppa64-binutils-2.37-lp152.4.9.1 cross-hppa64-binutils-debuginfo-2.37-lp152.4.9.1 cross-hppa64-binutils-debugsource-2.37-lp152.4.9.1 cross-i386-binutils-2.37-lp152.4.9.1 cross-i386-binutils-debuginfo-2.37-lp152.4.9.1 cross-i386-binutils-debugsource-2.37-lp152.4.9.1 cross-ia64-binutils-2.37-lp152.4.9.1 cross-ia64-binutils-debuginfo-2.37-lp152.4.9.1 cross-ia64-binutils-debugsource-2.37-lp152.4.9.1 cross-m68k-binutils-2.37-lp152.4.9.1 cross-m68k-binutils-debuginfo-2.37-lp152.4.9.1 cross-m68k-binutils-debugsource-2.37-lp152.4.9.1 cross-mips-binutils-2.37-lp152.4.9.1 cross-mips-binutils-debuginfo-2.37-lp152.4.9.1 cross-mips-binutils-debugsource-2.37-lp152.4.9.1 cross-ppc-binutils-2.37-lp152.4.9.1 cross-ppc-binutils-debuginfo-2.37-lp152.4.9.1 cross-ppc-binutils-debugsource-2.37-lp152.4.9.1 cross-ppc64-binutils-2.37-lp152.4.9.1 cross-ppc64-binutils-debuginfo-2.37-lp152.4.9.1 cross-ppc64-binutils-debugsource-2.37-lp152.4.9.1 cross-ppc64le-binutils-2.37-lp152.4.9.1 cross-ppc64le-binutils-debuginfo-2.37-lp152.4.9.1 cross-ppc64le-binutils-debugsource-2.37-lp152.4.9.1 cross-riscv64-binutils-2.37-lp152.4.9.1 cross-riscv64-binutils-debuginfo-2.37-lp152.4.9.1 cross-riscv64-binutils-debugsource-2.37-lp152.4.9.1 cross-rx-binutils-2.37-lp152.4.9.1 cross-rx-binutils-debuginfo-2.37-lp152.4.9.1 cross-rx-binutils-debugsource-2.37-lp152.4.9.1 cross-s390-binutils-2.37-lp152.4.9.1 cross-s390-binutils-debuginfo-2.37-lp152.4.9.1 cross-s390-binutils-debugsource-2.37-lp152.4.9.1 cross-s390x-binutils-2.37-lp152.4.9.1 cross-s390x-binutils-debuginfo-2.37-lp152.4.9.1 cross-s390x-binutils-debugsource-2.37-lp152.4.9.1 cross-sparc-binutils-2.37-lp152.4.9.1 cross-sparc-binutils-debuginfo-2.37-lp152.4.9.1 cross-sparc-binutils-debugsource-2.37-lp152.4.9.1 cross-sparc64-binutils-2.37-lp152.4.9.1 cross-sparc64-binutils-debuginfo-2.37-lp152.4.9.1 cross-sparc64-binutils-debugsource-2.37-lp152.4.9.1 cross-spu-binutils-2.37-lp152.4.9.1 cross-spu-binutils-debuginfo-2.37-lp152.4.9.1 cross-spu-binutils-debugsource-2.37-lp152.4.9.1 cross-xtensa-binutils-2.37-lp152.4.9.1 cross-xtensa-binutils-debuginfo-2.37-lp152.4.9.1 cross-xtensa-binutils-debugsource-2.37-lp152.4.9.1 References: https://www.suse.com/security/cve/CVE-2020-16590.html https://www.suse.com/security/cve/CVE-2020-16591.html https://www.suse.com/security/cve/CVE-2020-16592.html https://www.suse.com/security/cve/CVE-2020-16593.html https://www.suse.com/security/cve/CVE-2020-16598.html https://www.suse.com/security/cve/CVE-2020-16599.html https://www.suse.com/security/cve/CVE-2020-35448.html https://www.suse.com/security/cve/CVE-2020-35493.html https://www.suse.com/security/cve/CVE-2020-35496.html https://www.suse.com/security/cve/CVE-2020-35507.html https://www.suse.com/security/cve/CVE-2021-20197.html https://www.suse.com/security/cve/CVE-2021-20284.html https://www.suse.com/security/cve/CVE-2021-20294.html https://www.suse.com/security/cve/CVE-2021-3487.html https://bugzilla.suse.com/1179898 https://bugzilla.suse.com/1179899 https://bugzilla.suse.com/1179900 https://bugzilla.suse.com/1179901 https://bugzilla.suse.com/1179902 https://bugzilla.suse.com/1179903 https://bugzilla.suse.com/1180451 https://bugzilla.suse.com/1180454 https://bugzilla.suse.com/1180461 https://bugzilla.suse.com/1181452 https://bugzilla.suse.com/1182252 https://bugzilla.suse.com/1183511 https://bugzilla.suse.com/1183909 https://bugzilla.suse.com/1184519 https://bugzilla.suse.com/1184620 https://bugzilla.suse.com/1184794 https://bugzilla.suse.com/1188941 https://bugzilla.suse.com/1191473 https://bugzilla.suse.com/1192267

1 0

openSUSE-RU-2021:1473-1: moderate: Recommended update for cacti, cacti-spine
by maintenance＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Recommended Update: Recommended update for cacti, cacti-spine ______________________________________________________________________________ Announcement ID: openSUSE-RU-2021:1473-1 Rating: moderate References: #1192408 Affected Products: openSUSE Leap 15.2 openSUSE Backports SLE-15-SP3 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for cacti, cacti-spine fixes the following issues: cacti-spine was updated to 1.2.19: * Fix 1ssues with polling loop may skip some datasources * Fix ping no longer works due to hostname changes * Fix RRD steps are not always calculated correctly * Fix unable to build when DES no longer supported * Fix IPv6 devices are not properly parsed * Reduce a number of compiler warnings * Fix compiler warnings due to lack of return in thread_mutex_trylock * Fix Spine will not look at non-timetics uptime when sysUpTimeInstance overflows * Improve performance of Cacti poller on heavily loaded systems cacti was updated to 1.2.19: * Further fixes for grave character security protection (boo#1192408) * Fix Over aggressive escaping causing menu visibility issues on Create Device page * Add SHA256 and AES256 security levels for SNMP polling * Import graph template(Preview Only) show color_id new value as a blank area * Fix Editing graphs errors due to missing sequence * Fix 2hen hovering over a Tree Graph, row shows same highlighting as Graph Edit screen * Fix 2hen RealTime is not active, console errors may appear * Fix race conditions may occur when multiple RRDtool processes are running * Fix errors creating graphs from templates * Fix errors when duplicating reports * Fix Boost may be blocked by overflowing poller_output table * Fix Template import may be blocked due to unmet dependency warnings with snmp ports * Fix Newer MySQL versions may error if committing a transaction when not in one * Fix SNMP Agent may not find a cache item * Fix Correct issues running under PHP 8.x * Fix When polling is disabled, boost may crash and creates many arch tables * Fix When poller runs, memory tables may not always be present * Fix Timezones may sometimes be incorrectly calculated * Fix Allow monitoring IPv6 with interface graphs * Fix When a data source uses a Data Input Method, those without a mapping should be flagged * Fix When RRDfile is not yet created, errors may appear when displaying the graph * Fix Cacti missing key indexes that result in Preset pages slowdowns * Fix Data Sources page shows no name when Data Source has no name cache * Fix db_update_table function can not alter table from signed to unsigned * Fix data remains in poller_output table even if it's flushed to rrd files * Fix Parameter list for lib/database.php:db_connect_real() is not correct in 3 places * Fix Offset is a reserved word in MariaDB 10.6 affecting Report * Fix Rendering large trees slowed due to lack of permission caching * Fix Error on interpretation of snmpUtime, when to big * Fix Applying right axis formatting creates an error-image * Fix Unable to Save Graph Settings from the Graphs pages * Fix Graph Template Cache is nullified too often when Graph Automation is running * Fix When Adding a Data Query to a Device, no Progress Spinner is shown * Fix New Browser Breaks Plugins that depend on non UTC date time data * Fix errors when testing remote poller connectivity * Fix errors when renaming poller * Fix Removing spikes by Variance does not appear to be working beyond the first RRA * Fix LDAP API lacks timeout options leading to bad login experiences * Add a normal/wrap class for general use * Limit File Types available for Template Import operations * Fix Cacti does not provide an option of providing a client side certificate for LDAP/AD authentication * Support Stronger Encryption Available Starting in Net-SNMP v5.8 * Allow Cacti to use multiple possible LDAP servers * Add a 15 minute polling/sampling interval * Provide additional admin email notifications * Add warnings for undesired changes to plugin hook return values * When creating a Graph, make testing the Data Sources optional by Template * Update phpseclib to 2.0.33 * Update jstree.js to 3.3.12 * Improve performance of Cacti poller on heavily loaded systems * MariaDB recommendations need some tuning for recent updates Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1473=1 - openSUSE Backports SLE-15-SP3: zypper in -t patch openSUSE-2021-1473=1 Package List: - openSUSE Leap 15.2 (noarch): cacti-1.2.19-lp152.2.18.1 - openSUSE Leap 15.2 (x86_64): cacti-spine-1.2.19-lp152.2.15.1 cacti-spine-debuginfo-1.2.19-lp152.2.15.1 cacti-spine-debugsource-1.2.19-lp152.2.15.1 - openSUSE Backports SLE-15-SP3 (aarch64 i586 ppc64le s390x x86_64): cacti-spine-1.2.19-bp153.2.6.1 - openSUSE Backports SLE-15-SP3 (noarch): cacti-1.2.19-bp153.2.6.1 References: https://bugzilla.suse.com/1192408

1 0

openSUSE-SU-2021:1474-1: Security update for tinyxml
by opensuse-security＠opensuse.org 15 Nov '21

15 Nov '21

openSUSE Security Update: Security update for tinyxml ______________________________________________________________________________ Announcement ID: openSUSE-SU-2021:1474-1 Rating: low References: #1191576 Cross-References: CVE-2021-42260 Affected Products: openSUSE Leap 15.2 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for tinyxml fixes the following issues: - CVE-2021-42260: Fixed an infinite loop for inputs containing the sequence 0xEF0x00 (bsc#1191576) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.2: zypper in -t patch openSUSE-2021-1474=1 Package List: - openSUSE Leap 15.2 (x86_64): libtinyxml0-2.6.2-lp152.4.3.1 libtinyxml0-debuginfo-2.6.2-lp152.4.3.1 tinyxml-debugsource-2.6.2-lp152.4.3.1 tinyxml-devel-2.6.2-lp152.4.3.1 tinyxml-docs-2.6.2-lp152.4.3.1 References: https://www.suse.com/security/cve/CVE-2021-42260.html https://bugzilla.suse.com/1191576

1 0